Recurring discoveries of abiotic methane in gas seeps and springs in ophiolites and peridotite massifs worldwide raised the question of where, in which rocks, methane was generated. Answers will impact the theories on life origin related to serpentinization of ultramafic rocks, and the origin of methane on rocky planets. Here we document, through molecular and isotopic analyses of gas liberated by rock crushing, that among the several mafic and ultramafic rocks composing classic ophiolites in Greece, i.e., serpentinite, peridotite, chromitite, gabbro, rodingite and basalt, only chromitites, characterized by high concentrations of chromium and ruthenium, host considerable amounts of 13C-enriched methane, hydrogen and heavier hydrocarbons with inverse isotopic trend, which is typical of abiotic gas origin. Raman analyses are consistent with methane being occluded in widespread microfractures and porous serpentine- or chlorite-filled veins. Chromium and ruthenium may be key metal catalysts for methane production via Sabatier reaction. Chromitites may represent source rocks of abiotic methane on Earth and, potentially, on Mars.
Over the last twenty years, a long series of discoveries revealed considerable amounts of methane (CH4) manifesting in surface fluids or aquifers (seeps, hyperalkaline springs, boreholes) in continental, serpentinized ultramafic rocks, within ophiolites or peridotite massifs1,2,3,4. These gas occurrences are more common than assumed in the past and are today documented in at least 17 countries4. Associated with variable amounts of hydrogen (H2) and other gaseous hydrocarbons (ethane to butane), methane in serpentinized peridotites (MSP) is considered, based on isotopic and other geochemical interpretative tools, to be dominantly abiotic, originating from Fischer-Tropsch Type reactions (FTT) between carbon dioxide (CO2) and H2 (i.e., Sabatier reaction, or CO2 hydrogenation: 4H2 + CO2 = CH4 + 2H2O)1,4,5. A similar origin has been invoked for MSP in submarine hydrothermal systems and for deep gas in Precambrian shields6,7. MSP has several important implications, from energy resource exploration to geological methane cycle and emissions into the atmosphere, as well as subsurface microbiology and the origin of life on early Earth and other rocky planets, such as Mars. Abiotic methane can, in fact, be an energy source for microbes, and the Sabatier reaction, following H2 production via serpentinization, may represent the primordial passage from inorganic (CO2) to organic (CH4) chemistry. Serpentinized rocks occur in various regions of Mars and, as on Earth, they could be source of abiotic methane8. While several geochemical and microbiological processes around MSP have been understood, there is still a major question without a clear answer: what are the “source” rocks where this methane was generated? Where did the abiotic reaction occur? The analysis of MSP in a fluid system -surface seep, springs or groundwater- does not help in the identification of the gas provenance because the sampled fluid typically results from multiple gas migration and accumulation steps that may be spatially and temporally distant from the system where gas originated, and may lead to post-genetic modifications of the gas (e.g., molecular and isotopic fractionations, and re-equilibration with groundwater). The basic assumption for the MSP is, however, that it originated within one or more rocks composing an ophiolite sequence or peridotite massif, and it was produced at relatively low temperatures (<150 °C)9,10. However, the exact provenance of the gas has remained elusive. To identify the provenance of abiotic methane we investigated the gas content of all major lithotypes occurring in and below typical ophiolites in Greece, i.e., serpentinite, peridotite, chromitite, gabbro, rodingite and basalt (Fig. 1). Surface MSP manifestations were documented in one of these ophiolites (Othrys)11. The study includes analysis of gas liberated by rock crushing (62 samples from four ophiolite complexes), confocal high-resolution Raman mapping, microscopic and petrographic observations, and analysis of chromium and ruthenium, which may represent potential catalysts for abiotic methane production.
Results and Discussion
Occurrence and isotopic composition of methane and other gases
Analyses of gas liberated by crushing, performed for comparison on the same types of rocks in two different laboratories via gas chromatographic – isotope ratio mass spectrometry (GC-IRMS) and laser spectroscopy (see Methods), revealed that chromitites, and a rodingitized gabbro intruding chromitites, have considerable amounts of CH4, exceeding 0.1 (up to 1.2) μg per gram of rock (Fig. 2; Supplementary Table 2). Other ultramafic and mafic rocks, dunites, gabbros, rodingites and basalts, displayed significantly lower CH4 concentrations (typically < 0.05 μg CH4/grock), comparable to non-ophiolitic rocks, granite, limestone and quartz, used as blanks (Supplementary Information), where small amounts of gas were presumably produced artificially by crushing12. Two exceptions are for a rodingitised gabbro (sample ARCB4, with 0.27 μg CH4/grock) and a peridotite, TE2 (0.13 μg CH4/grock) from the Othrys ophiolite. Interestingly, the outcrops of these rocks are very close to the CH4-rich hyperalkaline springs of Archani and Ekkara (Supplementary Fig. 1). Chromitites also displayed higher amounts of ethane, propane and butane (especially MSK, MET and ER samples) and hydrogen (up to 22 vol.% in MSK2, the same sample with the highest CH4 concentration; Supplementary Table 2). Since H2 in blanks reached 0.8 vol.%, H2 in the ophiolite samples where its concentration does not exceed 1 vol.% could be mixed with H2 artificially generated by crushing. Above these concentrations, the amounts of H2 and C2+ alkanes are however proportional to that of methane (Fig. 3a,b). CO2 concentrations are variable, without appreciable differences between chromitites and other rocks.
The stable C isotope composition of CH4 (δ13C) in chromitites (and gabbro intruding chromitite) ranges from +1 to −22‰ (mean of −8.2‰). The most CH4-enriched samples (MSK2, ERB2, MET5, AET1, AET5) have δ13C values from −4 to −16‰. In the other rocks, δ13C values are typically lower than −20‰, down to −43‰ (mean of −22‰ in peridotites, rodingites and gabbros; −34‰ in basalts; Fig. 3c). These values are similar to those obtained in blank analyses (Supplementary Tables 5 and 6). The chromitite δ13C values are compatible with an abiotic origin of methane1 and are within the range observed in surface MSP manifestations4 (Supplementary Fig. 4). The abiotic origin is further supported by the inverse distribution of δ13C values from C1 to C3, namely δ13C1 > δ13C2 > δ13C3 (Supplementary Table 2) typically (although not exclusively) resulting from polymerization of CH4 molecules7. Biotic (thermogenic) alkanes have, in fact, δ13C values characterized by normal distribution, i.e. δ13C1 < δ13C2 < δ13C3. The inverse isotopic trend exclusively occurs in chromitites and in the only peridotite (TE2) with high CH4 concentration (>0.13 μg CH4/grock); the normal isotopic trend, with much lower hydrocarbon concentrations, was observed in all other peridotites, gabbros and basalts (and in the only blank, a limestone, where isotope composition of ethane was measured). The stable H isotope composition of H2, δ2H-H2, ranges from −377 to −646‰ in chromitites, and is higher (up to −230‰) in other ophiolite rocks including basalts, where however few data were available due to the low H2 yields. The δ2H values of H2 in chromitites are similar to those of abiotic gas of low temperature serpentinization systems (e.g., in springs or seeps in Turkey, Oman, Philippines; e.g., ref.13).
Chromium and ruthenium content
It is known that chromitites may contain considerable concentrations of chromium and Platinum Group Elements (PGE) and, among these, ruthenium is a powerful catalyst for CO2 hydrogenation9 (or Sabatier reaction). We analysed PGE in 20 samples, 10 chromitites and 10 non-chromitite samples (Supplementary Table 8). As expected, the highest Cr and Ru concentrations were detected in chromitites. Interestingly, Ru concentrations exceeding 100 ppb were found in the chromitites that also showed the highest methane concentrations, i.e., MSK, AET, MET and ERB samples; Fig. 3d). The potential role of these metals in methane generation is discussed below.
Microstructures and Raman CH4 detection in gas-rich rocks
Microstructural, mineral phase and Raman analyses were focused on the chromitites MSK2, AET1 and AET5 (described in detail in Supplementary Information), which showed the highest concentrations of CH4 (Figs 2 and 3a). Our aim was to detect fluid inclusions, voids, fractures, and veins where CH4 could be potentially stored. We did not detect primary fluid inclusions; a few trails of secondary inclusions (2 to 15 μm) crossing Cr-spinel crystals were observed in AET1 and AET5. Electron microscopy and confocal Raman analyses (at sub-micrometer resolutions; see Methods) revealed that these inclusions are mostly filled with a solid phase, interpreted as serpentine, and lack microscopic evidence of liquid/vapor phases (Fig. 4 and Supplementary Fig. 7). No CH4 or H2 were detected in these inclusions. The samples are characterized by a wide array of fractures, cracks and serpentine or chlorite filled veins. Serpentine is sometimes associated to brucite and magnesite suggesting incomplete reaction between these phases14. The veins, with thickness reaching 300 μm, generally occur at the boundary of the main primary minerals, mainly Cr-rich spinel and, in a less amount, olivine and pyroxene (details are in Supplementary Information). They occupy up to nearly 50% of sample AET5. The veins are associated with three types of porosity: (a) interconnected paleo-porosity defined by secondary minerals, (b) a present-day (apparently not interconnected) porosity represented by voids and pores (between 0.5 μm and 15 μm) in serpentine and chlorite, and (c) a partly connected porosity related to fractures and tectonically fragmented chromites (Fig. 4). Open fractures often occur at the boundaries between the chromite crystals and the secondary mineral-filled veins (Fig. 4a) or, in a subordinate amount, within chromite crystals (Fig. 4b,c). The pore-like structure of chlorite (Fig. 4d) is very similar to that observed in sandstone hydrocarbon reservoirs15. Voids are observed within serpentine-chlorite veins (Fig. 4a–e) and in zones of brittle deformations, where chromite crystals are fragmented by tectonic comminution (Fig. 4f). The prevailing interconnections among the veins are of X-type (up to 75%) and are well above the percolation threshold16 (Supplementary Fig. 6). The anisotropic permeability tensor17 (see also Supplementary Information) indicates that the paleo-flow was allowed along the average orientation of the veins with the larger hydraulic gradients nearly orthogonal to the vein walls.
Since fluid inclusions were not found, Raman analyses were conducted to search CH4 within the porous veins and fractures, using both rock chips and thin sections (see Methods). In both cases we observed CH stretches in AET1, AET5 and MSK2 centered on 2917 cm−1 (the symmetrical stretching mode ν1 of CH4 in gaseous state) but asymmetrically broadened covering both higher and lower frequencies, with two sub-peaks at about 2908 and 2940 cm−1 (Fig. 5; Supplementary Fig. 7). These shifts are typical of chemisorbed CH4, which exhibits a spectrum reflective of a –CH3 bond vibration18,19 as confirmed by our Ne lamp calibration (Supplementary Information). Examples of chemisorbed CH4 detection in a chip (sample AET5) is shown in Fig. 5a. Broad CH stretches could also have a contribution from ethane doublet20 (2895 and 2955 cm−1). In the thin sections the peaks, observed on spot analyses, profiles and 2D maps, match the calibrated chemisorbed CH4 and the peaks observed in chips, and occur exclusively in serpentine-filled fractures (Fig. 5b,c).
The occurrence of methane within secondary structures, and not in primary fluid inclusions, is compatible with post-magmatic, late and low temperature generation of CH4, likely after ophiolite obduction4,10. We do not exclude that fluid inclusions in the investigated chromitites are more abundant than we observed in the three samples; further analyses shall be performed on a wider set of sections.
Abundance of methane in chromitites
As suggested in milling tests (Supplementary Information), the highest amounts of gas are liberated after about 20–25 min of milling; the abundances of CH4 reported in Supplementary Table 1 (based on shorter milling time to reduce the probability of artificial gas generation) represent, therefore, a fraction, likely 25–30%, of the actual amount of gas occluded in the rocks. The occurrence of gas is however quite heterogeneous as, sometimes, samples of the same type of rock display different gas abundances. Overall, that gas abundance in chromitites is generally much higher than in other rocks is unequivocal. The CH4 concentrations (per gram of rock) in our chromitites are higher than those reported for ocean basalts12 or igneous complexes21,22, but similar to those found in other PGE-enriched ultramafic rocks, dunites and lherzolites in Russia23. However, it is reasonable to assume that if CH4 is in the form of free-gas, stored within the interstices and fractures, as suggested by Raman analyses (see below) and as documented, for example, for the Khibiny igneous complex24, the samples in surface outcrops, as those investigated in this work, may have experienced considerable degassing (e.g., due to weathering) and most of gas is, then, liberated during the preparation of chips (for milling) and thin sections; therefore the CH4 observed by us may represent a portion, the residual part, of the actual amount of gas stored in chromitites.
Chromitites as methane source rocks
Basically, over the entire ophiolite sequences only chromitites, and gabbros or peridotites in contact with chromitites, show considerable amounts of methane (and other hydrocarbons). In the Othrys complex, gabbros and basalts underlying the chromitite levels, and flood basalts that separate the ophiolite nappe with the underlying basement, are devoid of methane. The chromitites appear as methane-bearing rocks surrounded by gas-free formations (Fig. 6). It is reasonable to assume, therefore, that the methane is autochthonous, formed within the chromitite-rich ultramafics.
If FTT (e.g. Sabatier) reactions are the mechanism for methane production in ultramafic rocks, as considered in a wide body of literature (e.g., refs1,5 and references therein), then H2, CO2 and a metal catalyst must be present. Chromitites investigated by us have actually the higher amounts of H2, which may derive from external serpentinized rocks or even by the internal serpentinite-veins (high fluorescence induced by secondary hydrated minerals prevented H2 peaks detection). CO2 also occurs in variable amounts in chromitites, but the original CO2 (which may derive from C-rich rocks, such as limestones, at the tectonic contact with the peridotites11) could be mixed with a component artificially generated by crushing. More important, however, is the fact that, among the several ophiolite lithotypes, chromitites do host the biggest amounts of metals that can act as catalysts for Sabatier reaction, such as chromium and ruthenium, which is one of the most powerful catalysts for CO2 hydrogenation. Laboratory experiments9 demonstrated that even very low concentrations of ruthenium, equivalent to those occurring in chromitites, can allow for rapid production of methane and heavier alkanes at temperatures below 100–150 °C. Geological, geothermal and CH4 isotopologue data4,10 suggest that these are actually the temperatures of abiotic methane production in peridotite massifs and crystalline shields. Chromium, and other metal catalysts occurring in chromitites such as Ni and Fe, could also support the Sabatier reaction, but they need higher temperatures, generally above 200 °C9. It was observed that Ru-minerals, such as laurite and Ru-pentlandite, are frequently within or in contact with fractures and chlorite/serpentine-filled veins25 and have been reported in both Othrys and Vourinos chromitites26,27. The Ru-minerals are often altered due to contact with percolating serpentinization fluids, H2 in particular28. These Ru-H2 rich fractures would represent ideal loci for methane production. We hypothesize, therefore, and according to Fig. 6, that chromitites are “source rocks” of abiotic methane. Other rocks, in contact with chromitites (such as MSKB2) or along a gas seepage system (such as ARCB4 and TE2), may receive and host the gas, acting as “reservoir rocks” in analogy with a conventional petroleum system. It will be important to extend the study, as performed in this work, to other ophiolites or peridotite massifs, especially where methane seeps/springs are known to occur, trying to reconstruct, whenever possible, the exact stratigraphy, relative position, geometry and volumes of the CH4-enriched lithotypes, in order to estimate the total amounts of gas stored.
We have documented that among the several mafic and ultramafic rocks composing classic ophiolites in Greece, i.e., serpentinite, peridotite, chromitite, gabbro, rodingite and basalt, only chromitites host considerable amounts of 13C-enriched methane, hydrogen and heavier hydrocarbons with inverse isotopic trend, which is typical of abiotic gas origin. Raman analyses suggest that methane is occluded in widespread microfractures and porous serpentine- or chlorite-filled veins. These chromitites also contain significant concentrations of chromium and ruthenium, two powerful catalysts for Sabatier reactions. Ruthenium, however, is the only known catalysts capable of producing CH4 at temperatures below 150 °C9, which are actually the CH4 generation temperatures in ultramafic rock settings on land, as suggested by geological models and geothermometry based on isotopologue (clumped-isotope) analyses10. We hypothesize, therefore, that chromitites represent a major gas source rock in ultramafic/serpentinized systems (ophiolites and peridotite massifs) where methane can be generated via Sabatier reaction.
The implications of this study are multiple. Our results may drive future research dealing with microbiology and origin of life: because serpentinization and the abiotic conversion of CO2 to CH4 are considered as first prebiotic steps in the origin of life29, it will be interesting to verify whether CH4 in chromitites may act as energy source (electron donor) for microbes. Ruthenium-rich chromitites could be source of the methane occurring in many other serpentinized peridotite systems (e.g., Oman, Turkey, Philippines, Italy, California, Spain, Bosnia and Herzegovina) and in the world’s leading chromium and PGE mines in Canada and South Africa7. Chromitites may provide abiotic methane to reservoir igneous rocks that could be object of exploration as energy resource. Conventional biotic gas fields in sedimentary basins overthrusted by ophiolites could, then, be “contaminated” to some extent by the abiotic gas of the chromitites. This may confound the characterization of the biotic gases (origin, type and maturity of source rocks) and thus the associated petroleum system model. Chromitites may, then, represent a new geological source of methane for the atmosphere, not considered among the natural greenhouse gas sources, yet30. Exhalations of methane to the atmosphere may occur along chromitite outcrops. Finally, it is worth noting that chromite-rich rocks with ruthenium (up to 160 ppb) exist also on Mars; they have been detected in the martian meteorites Chassigny and Chassignite NWA 273731,32. These meteorites could come from the Nili Fossae region where CH4 plumes were detected by Earth-based telescopic observations8. Chromitites on Mars could, then, be a source of methane.
Sampling of rocks
We investigated 62 samples of rocks collected in 23 different locations from four ophiolite complexes in Greece (Othrys, Koziakas, Vourinos, Chalkidiki; Fig. 1 and Supplementary Fig. 1) and four flood basalt locations (Edipsos, Agrilia, south and SE Othrys) adjacent to Othrys ophiolite. The rocks represent typical lithotypes of ophiolites or peridotite massifs, i.e., serpentinized dunites and harzburgites, gabbros, chromitites, rodingites and basalts (see Methods and Supplementary Table 1). Most of the samples are from the Othrys ophiolite, which includes a major ultramafic complex where methane-rich hyperalkaline waters are released in two spring sites (Archani and Ekkara)11. The Othrys samples comprise a full ophiolitic sequence (inverted during obduction), including ultramafic and mafic rocks overlying pillow lavas (basalts)33. Massive chromitites occur as podiform, lenticular or irregular ore bodies in serpentinized dunites within harzburgites. Triassic flood basalts underlying the Othrys ophiolite nappe34 were collected in Edipsos, Agrilia and six smaller areas. Chromitites, peridotites and basalts were also collected from the Vourinos ophiolite, considered one of the typical ophiolite complexes worldwide, as it includes a nearly undisturbed complete sequence. Mantle lithotypes include foliated harzburgite, hosting dunite pods with abundant chromite ores35. Peridotites, gabbros and basalts were then sampled in the Koziakas and Chalkidiki ophiolites. Samples were collected in mines and outcrops selected on the basis of the availability and variability of the lithotypes.
Gas liberation from rocks, detection and isotopic analyses
Rock crushing and analysis of liberated gas were performed, for comparison, in two laboratories (GEO-data, Garbsen, Germany, and Istituto Nazionale di Geofisica e Vulcanologia, INGV, Rome, Italy) using similar crushing devices but different gas collection and analytical methods. In both laboratories, relatively large rock samples, at least 100 g chips, were crushed to minimize gas yield variability due to heterogeneity of the gas occurrence in the rocks. At GEO-data laboratory, 50 rock samples were crushed using a RETSCH PM 100 planetary ball mill, with 500 mL low C (<0.5%) stainless-steel grinding jar equipped with a septum holder. Before milling the jar was evacuated down to <10−2 mbar, and 20 ml of helium or argon were added via a septum. Jar and spheres were carefully wet cleaned and dried with technical air after each milling run. The gas phase was sampled using a 60 ml syringe and transferred into a 50 ml glass container. The gas samples were analysed by a Shimadzu GC-2014 including GC-FID (with a capillary PORAPLOT N column) for detection of C1-C6 hydrocarbons, and GC-TCD (capillary MOLSIEVE 5A and PORAPLOT N column) for CO2 and H2 (relative errors ranging from 5 to 10%). Continuous flow isotope ratio analysis (CF-IRMS, PDZ Europe Scientific 2020) was used to measure the stable C isotope compositions of C1-C3 hydrocarbons and CO2, and the stable H isotope compositions of H2. At the beginning of each CG-IRMS run the analytical precision was tested by at least three injections of an isotopic calibration gas mixture (10,000 ppmv CH4, Linde). All isotope ratios are reported as δ13C and δ2H (‰) relative to VPDB (Vienna-Pee-Dee-Belemnite) and VSMOW (Vienna Standard Mean Ocean Water), respectively. Isotopic calibration was performed using IAEA standards (NGS 1, NGS 2, NGS 3, RM 8563, RM 8564, NBS 21 and VSMOW). Reproducibility (1σ) of the pure gas standard was better than ±0.3‰ for δ13C and ±2‰ for δ2H. At INGV laboratory, 55 rock samples were crushed using a RETSCH PM 100 planetary ball mill, with 250 mL low C (<0.5%) stainless-steel grinding jar equipped with two valves. After milling the jar head-space was directly analysed connecting the valves to a TDLAS (tunable diode laser absorption spectroscopy) CH4 sensor (GAZOMAT, mounted in a West Systems sensor package; range 0.1 ppmv–100%v/v; repeatability 0.1 ppmv). Gas was then transferred from the jar into 0.25 or 0.5 L Teflon bags for stable C isotope analyses of CH4 by using Cavity Ring-Down Spectroscopy (Picarro G2112-I CH4 isotope analyser, precision <0.8‰ at 20 ppmv CH4, 5 min, 1σ, based on two standards with δ13C: −20‰ and −40‰ VPDB). Jar and spheres were carefully cleaned by isopropanol after each milling. Methane concentration data are expressed in μg CH4 per gram of rock (μg/gr), calculated from ppmv values measured in the headspace and knowing sample weight. Milling conditions (time and velocity) were set after specific tests, performed by both laboratories (Supplementary Information). Multiple blank analyses (using granite, limestone, sand, quartz and aluminium oxide) and uncertainties of the milling extraction method are discussed in Supplementary Information.
Confocal Raman Imaging Spectroscopy
Raman analyses were carried out to detect CH4 in inclusions and microfractures or veins and to determine solid inclusions. Raman spectra of inclusions were acquired on AET 1 and AET5 polished thin section (100 µm thick) by a Xplora Plus Horiba Jobin-Yvon and using a 532 nm laser (10 acquisitions of 5 sec each). The measured laser power was 20–25 mW at the source, and about 80% less at the sample surface. The laser was focused by an Olympus Microscope BX41/51 (numerical aperture [NA] 0.9) with a 100× objective. The signal was dispersed using a 600 g/mm grating and analysed by an Andor CCD detector. The spectrometer was calibrated with silicon standard. Raman spectra of rock fractures and interstices were acquired by high-resolution confocal Witec Alpha 300R. Single spectra on AET1 and AET5 chips and thin sections (100 µm thick) were acquired using a 532 nm laser (10 acquisitions of 2 sec. each). The measured laser power was 15 mW at the source, and about 20% less at the sample surface. The laser was focused on the samples by a Zeiss miscroscope with a 100× objective (numerical aperture [NA] 0.9). The signal was dispersed using a 600 g/mm grating and finally analysed by EMCCD detector. The spectrometer was calibrated with silicon standard. Single and multispectra-line and spectral images were collected using the same setup described above. The multispectra-line was performed on the fracture acquiring 50 spectra. Each spectrum was obtained with an integration time 1 sec. and 10 accumulations. The spectral image was performed following a regular grid of points, 60 points for line on 70 lines, on a scan area of 21 × 21 µm. Additional Raman spectra and images on AET5 and MSK samples were collected using a Witec α-Scanning Near-Field Optical Microscope that has been customized to incorporate confocal Raman spectroscopic imaging. The excitation source is a frequency-doubled solid-state YAG laser (532 nm) operating between 0.3 and 1 mW output power (dependent on objective), as measured at the sample using a laser power meter. Objective lenses used included a x100 LWD and a x20 LWD with a 50 μm optical fiber acting as the confocal pin hole. Spectra were collected on a Peltier-cooled Andor EMCCD chip, after passing through a f/4 300 mm focal length imaging spectrometer typically using a 600 lines/mm grating. The lateral resolution of the instrument is as small as 360 nm in air when using the x100 LWD objective, with a focal plane depth of ~800 nm. Typically 2D imaging and single spectra modes, allowing the acquisition of a spectrum from a single spot on the target, were used during this study. Average spectra are produced typically using integration times of 30 sec. per accumulation and 10 accumulations to allow verification of weak spectral features. All analyses were conducted on fresh fracture surfaces prepared using reflected light microscopy to locate the field of interest. The height and width of the field of interest within the light microscopy image were then measured and divided by the lateral resolution of the lens being used, to give the number of pixels per line. The instrument then takes a Raman spectrum (0–3600 cm−1 using the 600 lines mm−1 grating) at each pixel using an integration time between 1 and 6 s per pixel. We used a Neon calibration lamp and deconvolution using ACD labs Spectrus software to calibrate the CH region using the Neon peaks at 626.65, 630.48, 633.44 and 638.30 nm.
Polished-thin sections from 62 samples were described macroscopically and studied using a Zeiss Primotech polarizing microscope for a detailed petrographic examination under transmitted light. The relevant lithotypes were classified following the IUGS classification scheme. Representative polished-thin sections were further studied via scanning electron microscope.
Scanning electron microscopy
Detailed mineralogical descriptions and microanalyses were conducted using a JEOL JSM-7610F, field-emission scanning electron microscope, equipped with an Oxford 50EDS energy dispersive X-ray (EDX) detector, on polished-thin sections of the samples AET1, AET2, AET3, AET5, MSK2, MSKB3, ARCB4, KRN6, KRN7, LOG6, LOG7, P3, P4, SK1, SK2, SK3, ERB1, ERB2. Operating conditions were 20 kV accelerating voltage, 3 nA beam current and 60% detector dead time for EDX analyses. Microstructures, inclusions, fractures and veins were observed in samples AET1, AET5 and MSK2 using field-emission scanning electron microscopy (FESEM) Jeol JSM-6500F equipped with an EDX (detector resolution 133 eV). Operating conditions were 15 kV accelerating voltage, 0.8 nA beam current (cup), and approximately 30% detector dead time for EDX spectral analysis.
Chromium oxide (Cr2O3) and PGE analyses were conducted at the Activation Laboratories Ltd. (Actlabs), Ontario, Canada. Only Cr2O3 and ruthenium (Ru) data are reported in this work. Initial samples of 500 g rock were crushed to pass a 10 mesh sieve. Riffle splitter was used to sub-sample 250 g for each sample that was consequently pulverized in a mild steel mill to a size that passes through a 105 μ mesh sieve. Cleaner sand was used between the preparations of each sample. A subsample of 25 g was analyzed by INAA (Instrumental Neutron Activation Analysis) after a pre-concentration stage of PGE with nickel sulfide fire-assay collection. Detection limit for Ru is 5 ppb. The analytical error, depending on the PGE concentrations, is ±100% for values close to detection limit, ±20% for a value 10 times the detection limit, ±10% for a value 100 times the detection limit.
Etiope, G. & Sherwood Lollar, B. Abiotic methane on Earth. Rev. Geoph. 51, 276–299 (2013).
Etiope, G. & Schoell, M. Abiotic gas: atypical but not rare. Elements 10, 291–296 (2014).
D’Alessandro, W. et al. Large compositional differences in the gases released from the Kizildag ophiolitic body (Turkey): evidences of prevailingly abiogenic origin. Mar. Petrol. Geol. 89, 174–184 (2018).
Etiope, G. et al. Methane and hydrogen in hyperalkaline groundwaters of the serpentinized Dinaride ophiolite belt, Bosnia and Herzegovina. Appl. Geochem. 84, 286–296 (2017).
McCollom, T. M. Abiotic methane formation during experimental serpentinization of olivine. Proc. Natl. Acad. Sci. USA 113, 13965–13970 (2016).
Proskurowski, G. et al. Abiogenic hydrocarbon production at Lost City hydrothermal field. Science 319, 604–607 (2008).
Sherwood Lollar, B. et al. Isotopic signatures of CH4 and higher hydrocarbon gases from Precambrian Shield sites: a model for abiogenic polymerization of hydrocarbons. Geochim. Cosmochim. Acta 72, 4778–4795 (2008).
Oehler, D. Z. & Etiope, G. Methane seepage on Mars: where to look and why. Astrobiology 17, 1233–1264 (2017).
Etiope, G. & Ionescu, A. Low-temperature catalytic CO2 hydrogenation with geological quantities of ruthenium: a possible abiotic CH4 source in chromitite- rich serpentinized rocks. Geofluids 15, 438–452 (2015).
Young, E. D. et al. The relative abundances of resolved 12CH2D2 and 13CH3D and mechanisms controlling isotopic bond ordering in abiotic and biotic methane gases. Geochim. Cosmochim. Acta 203, 235–264 (2017).
Etiope, G. et al. Methane flux and origin in the Othrys ophiolite hyperalkaline springs, Greece. Chem. Geol. 347, 161–174 (2013).
Welhan, J. A. Methane and hydrogen in mid-ocean-ridge basalt glasses: analysis by vacuum crushing. Can. J. Earth Sci. 25, 38–48 (1988).
Etiope, G., Schoell, M. & Hosgormez, H. Abiotic methane flux from the Chimaera seep and Tekirova ophiolites (Turkey): understanding gas exhalation from low temperature serpentinization and implications for Mars. Earth Plan. Sci. Lett. 310, 96–104 (2011).
Malvoisin, B. Mass transfer in the oceanic lithosphere: serpentinization is not isochemical. Earth Plan. Sci. Lett. 430, 75–85 (2015).
Stricker, S. & Jones, S. J. Enhanced porosity preservation by pore fluid overpressure and chlorite grain coatings in the Triassic Skagerrak, Central Graben, North Sea, UK. In: Armitage, P. J. et al. (Eds), Reservoir Quality of Clastic and Carbonate Rocks: Analysis, Modelling and Prediction. Geological Society London, Special Publication 435, https://doi.org/10.1144/SP435.4 (2015).
Manzocchi, T. The connectivity of two-dimensional networks of spatially correlated fractures. Water Resour. Res. 38, 1–20 (2002).
Long, J. C. S., Remer, J. S., Wilson, C. R. & Witherspoon, P. A. Porous media equivalents for networks of discontinuous fractures. Water Resour. Res. 18, 645–658 (1982).
Siberio-Pérez, D. Y., Wong-Foy, A. G., Yaghi, O. M. & Matzger, A. J. Raman spectroscopic investigation of CH4 and N2 adsorption in metal-organic frameworks. Chem. Mater. 19, 3681–3685 (2007).
Han, D., Nave, S. & Jackson, B. Dissociative chemisorption of methane on Pt(110)-(1x2): effects of lattice motion on reactions at step edges. J. Phys. Chem. 117, 8651–8659 (2013).
Atamas, N. A. et al. A study of the Raman spectra of alkanes in the Fermi-resonance region. J. Molec. Struct. 708, 189–195 (2004).
Giardini, A. A., Subbarayudu, G. V. & Melton, C. E. The emission of occluded gas from rocks as a function of stress: its possible use as a tool for predicting earthquakes. Geoph. Res. Lett. 3, 355–358 (1976).
Kerr, M. J. The application of gas chromatography in characterizing bulk fluid inclusion hydrocarbons in the footwall of the Sudbury Igneous Complex and other magmatic, hydrothermal and surficial ore-forming environments. Master Thesis, Saint Mary’s University, Halifax, Nova Scotia (2013).
Konnikov, E. G. et al. Fluid regime of platinum group elements (PGE) and gold-bearing reef formation in the Dovyren mafic-ultramafic layered complex, eastern Siberia, Russia. Miner. Deposita 35, 526–532 (2000).
Nivin, V. A., Treloar, P. J., Konopleva, N. G. & Ikorsky, S. V. A review of the occurrence, form and origin of Cbearing species in the Khibiny Alkaline Igneous Complex, Kola Peninsula, NW Russia. Lithos 85, 93–112 (2005).
Torres-Ruiz, J., Garuti, G., Gazzotti, M., Gervilla, F. & Fenoll Hach-Alì, P. Platinum- group minerals in chromitites from the Ojen lherzolite massif (Serrania de Ronda, Betic Cordillera, Southern Spain). Mineral. Petrol. 56, 25–50 (1996).
Garuti, G., Zaccarini, F. & Economou-Eliopoulos, M. Paragenesis and composition of laurite from chromitites of Othrys (Greece): Implications for Os–Ru fractionation in ophiolite upper mantle of the Balkan Peninsula. Miner. Deposita 34, 312–319 (1999).
Tsikouras, B., Ifandi, E., Karipi, S., Grammatikopoulos, A. T. & Hatzipanagiotou, K. Investigation of Platinum-Group Minerals (PGM) from Othrys Chromitites (Greece) Using Superpanning Concentrates. Minerals 6, 94, https://doi.org/10.3390/min6030094 (2016).
Garuti, G. & Zaccarini, F. In situ alteration of platinum-group minerals at low temperature: evidence from serpentinized and weathered chromitite of the Vourinos complex, Greece. The Can. Mineral. 35, 611–626 (1997).
Russell, M. J., Hall, A. J. & Martin, W. Serpentinization as a source of energy at the origin of life. Geobiology 8, 355–371 (2010).
Etiope, G. Methane uncovered. Nature Geosci. 5, 373–374 (2012).
Baumgartner, R. J. et al. The variability of ruthenium in chromite from chassignite and olivine-phyric shergottite meteorites: new insights into the behavior of PGE and sulfur in martian magmatic systems. Meteor. Planet. Sci. 52, 333–350 (2016).
Jones, J. H., Neal, C. R. & Ely, J. C. Signatures of the highly siderophile elements in the SNC meteorites and Mars: a review and petrologic synthesis. Chem. Geol. 196, 21–41 (2003).
Bortolotti, V. et al. Comparison among the Albanian and Greek ophiolites: in search of constraints for the evolution of the Mesozoic Tethys Ocean. Ofioliti 29, 19–35 (2004).
Tsikouras, B. et al. Geochemical processes and petrogenetic evolution of rodingite dykes in the ophiolite complex of Othrys (Central Greece). Lithos 113, 540–554 (2009).
Grammatikopoulos, T. A. et al. Spinel composition, PGE geochemistry and mineralogy of the chromitites from the Vourinos ophiolite complex, northwestern Greece. The Canad. Mineral. 49, 1571–1598 (2011).
We acknowledge the support of Petrobras-CENPES (Contract n. 0050.0089799.14.2, under the supervision of Martin Schoell, Gas Consult International Inc.) and the Deep Energy Community of the Deep Carbon Observatory. We thank: Manfred Schmitt, Heinrich Kreipe, Anke Jurisch (GEO-data, Garbsen) for collaboration in rock milling and GC-IRMS analyses; Jan Toporski and Andrea Richter (Witec, Ulm) for support and technical assistance in Raman analyses. W.L. Griffin and two anonymous reviewers provided positive and constructive comments. We also thank Sebastian Tappe for useful comments. The authors declare that the data supporting the findings of this study are available within the article.
The authors declare no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Tsikourasite, Mo3Ni2P1+x (x < 0.25), a New Phosphide from the Chromitite of the Othrys Ophiolite, Greece
Planetary and Space Science (2019)
Applied Geochemistry (2019)
First Detection of Methane within Chromitites of an Archean-Paleoproterozoic Greenstone Belt in Brazil