Article | Open | Published:

# An analysis and evaluation of the WeFold collaborative for protein structure prediction and its pipelines in CASP11 and CASP12

## Abstract

Every two years groups worldwide participate in the Critical Assessment of Protein Structure Prediction (CASP) experiment to blindly test the strengths and weaknesses of their computational methods. CASP has significantly advanced the field but many hurdles still remain, which may require new ideas and collaborations. In 2012 a web-based effort called WeFold, was initiated to promote collaboration within the CASP community and attract researchers from other fields to contribute new ideas to CASP. Members of the WeFold coopetition (cooperation and competition) participated in CASP as individual teams, but also shared components of their methods to create hybrid pipelines and actively contributed to this effort. We assert that the scale and diversity of integrative prediction pipelines could not have been achieved by any individual lab or even by any collaboration among a few partners. The models contributed by the participating groups and generated by the pipelines are publicly available at the WeFold website providing a wealth of data that remains to be tapped. Here, we analyze the results of the 2014 and 2016 pipelines showing improvements according to the CASP assessment as well as areas that require further adjustments and research.

## Introduction

The current experimental approaches to determine the native structure of proteins are too costly to keep pace with the wealth of protein sequences that genome sequencing projects generate. As of October 2017, the UniProt/TrEMBL database1 contains 93,236,986 protein sequence entries, whereas the protein data bank2 contains only 134,656 experimentally-determined protein structures, of which 42,591 are unique. A reliable method for predicting protein structure from its primary sequence of amino acids could help to bridge the sequence-structure knowledge gap and have a significant impact on bioinformatics, biology, and medicine. To help advance and assess the protein structure prediction (PSP) field, the Critical Assessment of techniques for protein Structure Prediction (CASP)3,4,5,6 series of community-wide experiments was initiated in 1994. Every other year, CASP challenges its participants to submit predicted structures for around one hundred proteins, whose structures are about to be experimentally determined or have been determined but not yet published. The CASP experiments run for three months and the results are evaluated by independent assessors after the experimental structures are made available. CASP history over the last two decades indicates that while significant progress has been made4,5,6, major roadblocks still remain5,6.

One such roadblock is the multi-step nature of PSP, and the diversity of the approaches to these steps. Figure 1 depicts this complexity in the form of a directed graph. A method for structure prediction needs to implement at least one path that leads from a protein sequence to a few high scoring structural models of proteins, aka decoys. The final overall performance of a prediction protocol depends heavily on the quality of the intermediate steps (the rectangle nodes in Fig. 1), each of which is still an open scientific problem. Thus, progress in the PSP field depends on advances in all sub-problems. Yet the need to build or at least adopt a complete path in order to participate in CASP raises a high entry barrier for new people and ideas. Further, the interfaces between the various steps (the arrows in Fig. 1) are not always standardized, making it difficult to exchange elements between existing methods.

The CASP organizers have long recognized this problem, and CASP experiments include three tracks that serve as short-cut entries into the graph (marked by asterisks in Fig. 1). Indeed, these tracks: contact prediction, quality assessment, and refinement, each addressing a major sub-problem, have a considerable impact on research. They evaluate the performance of methods in an objective manner, and most importantly, they provide developers with large data sets that can be used to improve them. Yet, these CASP tracks offer only a limited solution. Many sub problems are not covered at all, and further, the treatment of quality assessment and refinement is somewhat artificial. Within a prediction pipeline, for example, quality assessment is typically applied to large sets of decoys, all of which were generated by the same method (i.e., previous steps of the pipeline). The CASP quality assessment decoys, contrarily, are far fewer and are the outcome of dozens of servers, employing diverse methods. Similarly, refinement tasks in CASP start from a single decoy, allowing the use of CPU intensive methods. Contrarily, a prediction pipeline may require the refinement of all top scoring decoys, which limits the available CPUs per refinement task.

In order to support method development and reduce entry barriers, we started the WeFold collaborative effort in 20127,8,9. WeFold provides a flexible infrastructure for the creation of prediction pipelines (e.g. Fig. 2 shows the pipelines that start with Rosetta decoys), into which researchers may insert components of their methods such as refinement and quality assessment. These pipelines participate as groups in CASP allowing their overall performance to be evaluated in an objective and coherent manner along with all the other groups. This way a method may be applied to a variety of input sources and the utility of its outcome may be tested within a variety of pipelines. Further, the entire information flow through this infrastructure is documented, resulting in a data source for the development of methods that tackle sub-problems of PSP. Yet, an infrastructure needs a community of users to accomplish its goals. To this end, WeFold pursues an inclusive approach that brings together different groups that already participate in CASP, reaches out to raise awareness and excitement outside the CASP community, and tries to act as an incubator for new ideas. In fact, we have recruited non-CASP members who have contributed to the WeFold3 efforts and are co-authors of this manuscript or are working on innovative methodologies for the upcoming CASP13 exercise10,11.

The first WeFold collaboration included 31 researchers from 12 institutions. We created 5 hybrid pipelines, each of which was composed of a combination of methods contributed by the participants7. These pipelines competed against all the other methods during the CASP10 experiment. Motivated by the success of the first WeFold experiment, a broader invitation was extended in 2014 to both CASP and non-CASP members. This invitation was well received and resulted in the participation of 21 groups in CASP11. Finally, the last WeFold experiment included 16 groups that participated in 12 pipelines, which competed in CASP12 (2016). In this paper, we refer to these events as WeFold1, WeFold2, and WeFold3, respectively.

This manuscript analyses WeFold2 and WeFold3 as the latest two successive case studies, shows an overall improvement of the latter, and identifies the pipelines that stood out. The first case study helped in shaping the more successful second one, and the second provides plausible guidelines for future efforts. To this end, we complement the CASP assessment with analysis of the information flow within the pipelines to figure out where we benefited from joining forces and where we could have designed the pipelines better (the Supplementary Materials provide extensive analysis of the pipelines steps for WeFold2 and WeFold3). Some of these issues have been discussed intensively before (e.g. scoring) and others have almost been ignored in the literature, most notably domain assembly. Finally, we discuss the data resources that WeFold offers to the PSP community.

## Methods

The WeFold2 project participated in two categories within the CASP experiment: (1) PSP and (2) model refinement. Groups that participated in WeFold2 contributed one or more pipeline components, which were combined into 23 different pipelines. These components included: four major decoy generators (Foldit, Zhang, UNRES, and CASP11 servers12,13,14), three contact-prediction methods (GREMLIN, ICOS, and Floudas15,16), one secondary structure prediction method (conSSert17), a clustering algorithm adapted to deal with large numbers of models (Wallner), and other clustering algorithms such as the minimum-variance algorithm18, one filtering algorithm (Wallner), five refinement methods (Princeton_TIGRESS, KoBaMIN, GalaxyRefine, Delbem, and 3Drefine19,20,21,22,23) and eight QA/selection algorithms (SVLab, APOLLO, ModFOLD5_single, ProQ2, Delbem, Seder1.0, Kloczkowski/Pawlowski, and MESHI-score10,24,25,26,27,28). The online protein structure prediction servers were an important source of models for some of the WeFold pipelines. Two CASP servers, HHpred-A and HHpred-X29, were explicitly members of WeFold2 and provided their predictions immediately after they were generated. The other server decoys were obtained from the CASP website30.

The WeFold3 project focused on the protein structure prediction category alone. Participating groups combined components into 12 different pipelines. These components included: three major model generators (Rosetta, UNRES, and CASP12 servers)14,31,32, two contact prediction methods (GREMLIN and Floudas15), one secondary structure prediction method (conSSert17), one clustering algorithm18, three refinement methods (Princeton_TIGRESS, GalaxyRefine, and 3Drefine19,22,23), and seven QA/selection methods (APOLLO, MESHI-score, MESHI-MSC, ModFOLD6, MUFold, ProQ2, and Seder10,25,26,27,28,33,34). We decided to compare QA/scoring methods fairly by applying them to the same decoys sets. Thus, wfRosetta-MUfold, wfRosetta-ProQ-MESHI, wfRosetta-ProQ-MESHI-MSC, wfRosetta-ProQ-ModF6, wfDB_BW_SVGroup, and wfRosetta-Wallner started with the same set of Rosetta decoys and wfMESHI-Seok and wfMESHI-TIGRESS started with the same subsets of server decoys selected by MESHI. Moreover, wfRosetta-ProQ-MESHI and wfRosetta-ProQ-MESHI-MSC also used the same set of decoys and features to strictly compare two scoring functions10. With regards to decoys reduction needed to reduce the large set of Rosetta decoys to a manageable size for refinement and QA, we replace the filtering and clustering procedure that we had used in WeFold2 for the Foldit decoys, by ProQ2.

Table 1 shows all the pipeline components and the groups that contributed to them in WeFold2 and WeFold3. Table 2 shows all the pipelines that resulted from WeFold2 and WeFold3 with their corresponding CASP11 and CASP12 group number, category, and number of targets attempted. Five of these pipelines are also presented with some detail in Fig. 2. Description of the pipelines is provided in the Supplementary Materials.

### Pairwise pipeline comparison

Table 2 shows that many WeFold2 pipelines failed to submit decoys to all or even most of the targets. This was mainly true for the pipelines that relied on decoy sets contributed by the Foldit Players and the Zhang group. Based on volunteering work of citizen scientists, the Foldit project could not cope with the rate of target release during the CASP folding season. Further, the computational resources of players could not support modeling of the larger targets. Thus, the Foldit teams provided decoy datasets for less than a half of CASP “human” targets. On the other hand the decoy set contribution of the Zhang group included only single domain targets, again accounting for less than half of the human targets. To complicate the analysis further, the various submitted subsets of the targets did not overlap. Target coverage has improved considerably in WeFold3 when the pipelines attempted a larger number of the targets as shown in Table 2.

The CASP evaluation of performance, justifiably, takes a “user’s” perspective and penalizes lack of coverage. Yet, from a developer’s perspective, if these incomplete datasets were simply dismissed, we would miss much that could be learned to promote further research into such collaborative pipelines. Indeed, a thorough analysis of the WeFold2 results proved informative and helped shape the more successful WeFold3 pipelines (please refer to Supplementary Materials). We envisage that further improvements can be gained based on the current analyses presented below.

## Results and Discussion

### WeFold2 and WeFold3 performances in tertiary structure prediction

An aggregated summary of WeFold2 and WeFold3 results is presented in Fig. 3, which depicts the best per-target decoy submitted to CASP by all groups (blue) and the best submitted by WeFold (red). In both events WeFold pipelines submitted some of the best decoys (marked by red asterisks) as well as many other high quality ones. The figure also suggests an improved performance in WeFold3 compared with WeFold2, with a larger proportion of best or very-close-to-best decoys. The insert histograms in Fig. 3 depict the distributions of quality differences (Δ) between the best CASP decoys and their corresponding best WeFold decoy. As it can be seen in the inserts twice as many WeFold3 best models (40%) were also the best CASP decoy (Δ equal to zero) than were the WeFold2 models (20%) and most models in WeFold3 were close to the best CASP decoys (Δ close to zero). The CASP assessment considers each pipeline separately and yet shows a similar trend. None of the WeFold pipelines ranked high in CASP11, but eight of them did in CASP12 (Fig. 4).

Below we present detailed comparisons of the WeFold2 and WeFold3 pipelines.

### Detailed pipeline comparison

To allow comparison among WeFold pipelines and between WeFold pipelines and CASP groups chosen as gold standards, we compared each pair of pipelines based on the intersection of their submitted targets. For this subset of targets we compared the mean GDT_TS z-score value of the best submitted decoy and the first submitted one (model 1). The statistical significance of results was estimated using two-sided Wilcoxon paired test (as implemented in MATLAB35). In Fig. 5 a blue cell indicates that the row pipeline outperforms the column pipeline, white asterisks indicate statistical significance (p < 0.05), and a white dot indicates that the two groups have no more than ten targets in common.

With almost each pipeline submitting a unique subset of the targets, rigorous comparison is only possible between pairs of pipelines (see legends for details). Yet, an ad-hoc ordering is implied by associating each row-pipeline with the number of column pipelines that it outperforms, with higher weight on significant differences.

The CASP tradition is to rank prediction groups by either their model 1 or the best-out-of-five. The former is used with easy, template based modeling targets, and the latter with hard, free modeling, targets. Yet splitting WeFold predictions by category would render many submission sets of pipelines too small to analyze. Thus, here we focus on best-out-of-five (left-hand matrices in Fig. 5) but also provide the first model results for comparison. Generally speaking the first model results seem less stable with fewer significant differences between the groups (162 versus 186 in WeFold2 and 114 versus 88 in WeFold3).

#### WeFold2

Our first step in analyzing the results of the tertiary structure prediction pipelines is to compare their performances in a coherent way. Figure 5, top panel, presents an all-against-all comparison of pipeline performances in WeFold2. The leading Zhang group was added to this analysis for calibration, and as a gold standard. As expected it outperformed most of the pipelines, yet it does not outperform the two top WeFold2 pipelines wfZhng-Ksr and wfZhng-Sk-BW (groups 173 and 260).

Figure 5, mid panel, depicts these two Zhang-based WeFold pipelines (groups 173 and 260) along with three Zhang groups (underlined). Zhang provided WeFold with decoy sets of single domain targets that were generated by his own servers (groups 499 and 277). Each of the servers selected from its own decoy set and each of the WeFold pipelines selected and submitted five decoys from the combined sets (with refinement in the case of group 260). The Zhang human group (204) incorporated this decoy set (and other sources) into its I-TASSER algorithm. None of the pairwise comparisons is statistically significant when considering the best of five models submitted by the Zhang-based pipelines. Yet, although the Zhang servers performed best, the WeFold pipelines integrated them better than Zhang’s human group.

The ranking of CASP11 servers by the non-Wefold Keasar group (317) served as a starting point to sampling and refinement by the seven Foldit-based pipelines (Fig. 5, bottom panel). The small numbers of targets submitted by most of them (white dots) reduce the statistical reliability of any specific pairwise comparison. Yet, two trends are apparent. First, all the WeFold-Foldit pipelines performed better than their non-WeFold counterparts (the same people, sampling with different starting points). That is, the starting points provided to Foldit players by a MESHI selection among server models were overall better than those selected by Rosetta among those generated by the Rosetta server. Another observation is more intriguing. Two of the individual WeFold-Foldit groups (258 & 203) performed better than more sophisticated pipelines that used pooled decoys from all groups. Specifically, the decoys selected (manually) by the individual groups were within the pool and some of them were missed. Table 3 offers a plausible explanation. It follows the gradual loss of the best decoys along the filtering and clustering steps of the pipelines. These pipelines started with hundreds of thousands of decoys generated by the Foldit players and then reduced them to a hundred decoys by a filtering and clustering process, in order to make the refinement and selection steps more manageable given the time constraints. Table 3 shows that for a majority of the T0XXX targets (12/19) the overall GDT_TS loss is less than 4 GDT_TS percentage units for the complete pipeline. However, the GDT_TS loss in the filtering and clustering steps were significant for some targets as illustrated in Fig. 6, which shows box and whiskers plots representing the steps in Keasar-Foldit-based pipelines for target T0822-D1. The first and second columns represents the models created by the servers at stage1 and 2, respectively. Keasar selected a subset of 10 server models using MESHI. These models are marked as dots in the third column. Then Khatib selected 5 of those models, which are marked with triangles. Khatib’s selected models are given to the Foldit players who created a wide range of models, some of which were substantially better than those provided to them by Khatib as shown in column 4. However, column 5 shows that the clustering and filtering algorithm did not select those best models. In fact, Table 3 shows that the best models were filtered out because they had both high Rosetta energies and were over 20Å from the model with lowest Rosetta energy. The Supplementary Materials include box and whiskers plots that show the gradual loss of the GDT_TS values at each of the steps of the prediction pipelines for all the targets attempted by the WeFold teams.

#### The Refinement pipelines in CASP11

The results by the WeFold pipelines in CASP11 (there were no refinement WeFold pipelines in CASP12) show that Foldit players generally improved the starting model. Figure 7 shows the improvement or deterioration measured by the best GDT_HA for each step of the pipelines and for each target. GDT_HA is the High Accuracy GDT defined as GDT_HA = (GDT_P0.5 + GDT_P1 + GDT_P2 + GDT_P4)/4, where GDT_Pn denotes percent of residues under distance cutoff <= nÅ. This figure shows that in the first step of the pipelines (marked as Foldit-All), Foldit players were able to improve the starting model in 22/22 targets attempted, i.e. they generated models that were better than the starting one. For the second step (marked as Foldit-Clusters in Fig. 7), 17/22 targets show an improvement after clustering by Wallner. In the third step (marked as Foldit-Koba), the bars show improvement for 15/20 targets after refinement by KobaMIN. Finally, bars marked as wfFdit-K-McG, wfFdit-BW-KB-BW, wfFdit_BW_K_SVGroup, and wfFdit_BW_SVGroup show the best GDT_HA among the 5 models submitted by those pipelines. wfFdit-K-McG selected an improved model for 12/17 targets, wfFdit-BW-KB-BW selected an improved model for 10/17 targets, wfFdit_BW_K_SVGroup selected an improved model for 7/12 targets, and wfFdit_BW_SVGroup selected an improved model for 9/14 targets. In 17/20 cases, KobaMIN improved the top model of the Foldit-Cluster group.

A similar analysis was conducted for the WeFold pipelines in CASP10, where the highest improvement per target was 10.517. Figure 7 shows that 7 of the 22 CASP11 refinement targets were improved by 10 or more GDT_HA points. Among the best cases, TR769 and TR759 show improvements with respect to the initial model of around 20 points.

Figure 8 shows a comparison of the percentage of models in each step that have a higher GDT_HA than the starting model. The bars represent steps just like in Fig. 7 but in this case they show the percentage of models with GDT_HA higher than the template in each step of the pipeline to provide an idea of where the good models generated by Foldit are lost in the pipelines. Ideally, we would need to see an increased percentage of good models, i.e. enrichment, as the size of the sets is reduced from hundreds of thousands (generated by Foldit) to hundreds (clusters) to five, and the best models are kept in those sets. Unfortunately, this is not always the case as can be seen in Fig. 8.

We investigate the effect of the filtering and clustering steps in the refinement pipelines (the Foldit Clusters step in Figs 7 and 8) by comparing the maximum GDT_TS scores after each of the different steps in the clustering pipeline, i.e., by calculating the GDT_TS loss before and after the different steps in the clustering/filtering pipeline, (see Table ST1 in Supplementary Materials). For the refinement targets the overall GDT_TS loss is similar to the T0XXX targets (see Table 3), a majority (14/22) of the targets have GDT_TS loss less than five GDT_TS units. The difference is that most of the filtering is done based on the Rosetta energy and virtually none on the distance to the lowest energy model, because the structural ensemble in refinement is tighter. The only case where the clustering really fails is for target TR760. The best GDT_TS in the initial ensemble is 59.8. Almost 20 (19.8) GDT_TS units are lost after clustering and the best GDT_TS is 39.8. The reason for this failure is that the models with best GDT_TS have very unfavorable Rosetta energy (>200 Rosetta Units), and were filtered out by the energy based filter.

Nevertheless, it can be seen that the WeFold pipelines submitted models that were substantial improvements over the template for the majority of the refinement targets suggesting that the Foldit-based pipelines should be continued for this category.

#### WeFold3

The top panel of Fig. 9 presents an all-against-all comparison of pipeline performances in WeFold3. Again, a leading CASP group (BAKER) is added to this analysis as a gold standard. It outperforms all the pipelines, though its advantage over the three top pipelines is not statistically significant. The top four pipelines are also consistent with the CASP12 ranking (Fig. 4 top panel).

Figure 9, mid panel depicts two top WeFold pipelines (groups 303 and 384) as well as one non-WeFold group (MESHI). These three groups started from the same start point, which is the set of CASP server decoys ranked by MESHI-score, and tried to refine them. The refinement by Princeton_TIGRESS outperforms the other two resulting in the strongest WeFold3 pipeline.

Figure 9, bottom panel compares the seven Rosetta-based WeFold pipelines as well as the non-WeFold group BAKER-ROSETTASERVER. All these groups selected domain decoys from the same pool, hundreds of thousands decoys generated by Rosetta (Fig. 2). The Rosetta domain parsing method tries to identify template structures for optimal sequence similarity and structural coverage. If a confident PDB template cannot be identified, it predicts boundaries from a multiple sequence alignment based on start and end points of sequence alignment clusters. The large Rosetta data sets were reduced by filtering with ProQ2. Thus, all the Rosetta-based pipelines used the same reduced datasets as starting point. Yet, their performances differed considerably from that of the BAKER-ROSETTASERVER. A post CASP analysis suggests that domain assembly has been an obstacle for two of them (Rstta-PQ-MESHI and Rstta-PQ-MESHI-MSC), who submitted independent segments for each presumed domain. Often the official CASP evaluation units (domains) were different reducing the performance measure. However, this was not the only obstacle. Another post CASP analysis using only single domain proteins shows that ProQ2 performed well in most cases when selecting one thousand models among the hundreds of thousands Rosetta-generated models but the QA methods missed those best models in most cases.

The comparison among Rosetta-based pipelines shows that some top-performing QA methods like MESHI, which are trained and tested on server models do not perform equally well when applied to Rosetta server models pointing to the need for more data to generate more general scoring functions. The bottom panel of Fig. 9 also shows that Rstta-PQ-MESHI and Rstta-PQ-MESHI-MSC which only differ in the machine learning method used to combined the same features and applied to the same decoys, had similar performance thus confirming the results shown in10, which state that different machine learning methods do not seem to make a substantial difference in the performance of the scoring functions.

Figure 10 shows the best models at each step of the pipelines measured by GDT_HA and GDT_MM for each step of the Rosetta-based pipelines and for six single domain targets (Fig. S3 in the Supplementary Materials show a similar plot for the remaining single domain targets). GDT_MM is a Baker-lab specific metric, where the MAMMOTH alignment algorithm is used for the superposition. It should match GDT_TS in all other respects. We used GDT_MM instead of GDT_TS because Rosetta enables GDT_MM direct calculation using its silent files, thus avoiding the extraction of millions of PDB files. Silent files are Rosetta-specific file formats used for efficient concatenated storage of large numbers of structures. In total, 32,474,636 decoys were generated by BAKER-ROSETTASERVER and scored using ProQ2 during CASP12. As it can be seen in Fig. 10, the best models are not selected at each step of the pipelines in a consistent manner. This figure also shows that ProQ2 was a significant improvement compared to the filtering and clustering methods used for CASP11.

### Top performing groups in WeFold3 for all categories

Figure 4 (top panel) shows that four WeFold3 groups ranked among the top 20 of the CASP12 groups/servers. These charts show the top 20 CASP12 groups/servers according to average GDT_TS z-scores > −2 when considering all 3 categories, TBM, TBM/FM, and FM and only those groups that submitted models for at least half of the targets. The chart on the left-hand side shows the top 20 groups/servers when considering the best model submitted by each group for each target and the chart on the right-hand side shows top 20 groups/servers when considering Model 1 only.

The two pipelines that are based on MESHI selection, wfMESHI-TIGRESS and wfMESHI-Seok, benefited from the top performance of the MESHI group and one of them, wfMESHI-TIGRESS slightly outperformed MESHI when considering the best model submitted by each group. Group wfAll-Cheng, which used all the models shared by all the WeFold3 groups but usually selected models from the MESHI-based groups (as shown in Fig. S1 in the Supplementary Materials) ranked 13th in both cases, when considering the best model and model 1 only, showing a significant improvement with respect to its own performance in CASP11 when it ranked 47th. Of the Rosetta-based teams, none ranked among the top 20 when considering the best model submitted. Finally, group wfRstta-PQ2-Seder, which uses a mix of Rosetta and server models, also ranked among the top 20. In the next sections, we analyze the performance of the WeFold3 pipelines in the 3 subcategories TBM, TBM/FM, and FM.

#### Top performing groups in WeFold3 for the TBM category

Here we explore the performance of the WeFold3 pipelines in the TBM (Template-Based Modeling) category. Proteins in this category are those for which a close relationship could be detected by sequence similarity searches providing one or more templates. Figure 4, second and third panels, show the top 20 ranking CASP12 groups/servers when considering the average z-scores of both the assessors’ formula and GDT_TS, respectively. The CASP12 assessors used GDT_HA + ASE (Accuracy Self Estimate) for the assessment of models in this category. ASE is defined as

$$ASE=100.0\ast (1-Mean(|S(t{f}_{i}/{d}_{0})-S({d}_{i}/{d}_{0})|))$$

where tf i is temperature factor of the i-th residue in the model and d i is distance between i-th residues in lga alignment (sequence dependent mode)

$$S(x)=1/(1+{x}^{2})$$

d 0 is the scaling factor, set d 0  = 5.0

These charts show that focusing on either GDT_TS or ASE produced different results. In fact, when considering the assessors’ formula, two WeFold pipelines ranked among the top 20: wfRosetta-ProQ-ModF6 and wfAll-Cheng. Notice that wfRosetta-ProQ-ModF6 selected best 5 models among the models generated by the BAKER-ROSETTASERVER and neither the BAKER-ROSETTASERVER nor the BAKER group are among the top 20 in this category. The high performance of the wfRosetta-ProQ-ModF6 group was mainly due to accurate ranking and accuracy self-assessment (ASE) using the ModFOLD6_rank method33. On the other hand, when using GDT_TS values, the two MESHI-based groups and wfAll-Cheng ranked among the top 20 when considering both the best model among the 5 submitted and model 1. wfMESHI-Seok showed better results in TBM category than in other categories probably because the refinement method was originally trained to improve template-based models.

#### Top performing groups in WeFold3 for FM category

In this section, we analyze the performance of the WeFold3 pipelines in the FM (Free Modeling) category. Proteins in this category are those for which no structural template could be found by structural similarity searches. Figure 4, fourth panel, shows the top 20 ranking CASP12 groups/servers when considering the average z-scores of the GDT_TS values. According to these charts, three WeFold pipelines ranked among the top 20 when considering the best model submitted: wfMESHI-TIGRESS, wfMESHI-Seok, and wfAll-Cheng. Note that none of the pipelines that started with Rosetta decoys are among the top 20 in this case. On the other hand, two pipelines made it to the top 20 when considering models 1 only: wfRstta-PQ-MESHI-MSC and wfRosetta-ProQ-MESHI, which started with the 1000 models filtered with ProQ2 and selected the best 5 by combining the same features in Keasar’s dataset using different machine learning techniques10. However, these pipelines did not outperform the BAKER-ROSETTASERVER. The low performance of the Rosetta-based pipelines in this category can mainly be attributed to incorrect domain and difficult predictions. Compared to the pipelines that used “all-server models”, the Rosetta-based pipelines performed worse. Not surprisingly since they are based on a single server’s models, i.e. BAKER-ROSETTASERVER.

#### Top performing groups in WeFold3 for TBM/FM category

In this section, we analyze the performance of the WeFold3 pipelines in the TBM/FM category. Figure 4, bottom panel, shows the top 20 ranking CASP12 groups/servers when considering the average GDT_TS z-scores. According to these charts, four WeFold3 pipelines ranked among the top 20: wfMESHI-TIGRESS, wfRstta-PQ2-Seder, wfMESHI-Seok, and wfAll-Cheng. Like in the FM category, wfMESHI-TIGRESS performed slightly better than MESHI when considering the best model submitted. Note that none of the pipelines that started exclusively with Rosetta decoys did better than BAKER-ROSETTASERVER, which ranked 18th. We believe that the performance of the BAKER-ROSETTASERVER-based pipelines could be improved by including a new component to the pipelines to take care of domain splitting. Note that the wfAll-Cheng pipeline, which selected many models from the wfMESHI-Seok and wfMESHI-TIGRESS pipelines, ranked 20th when considering model 1 only even though the MESHI-based pipelines are not in the top20 list, which highlights the ability of this meta-pipeline to select top-ranking models.

## Conclusions

This paper discusses the second and third round of the WeFold experiment, WeFold2 and WeFold3, which took place in the context of CASP11 and CASP12, respectively. Twenty-one groups participated in WeFold2 and contributed a wide range of methods, some already proven successful and some in experimental stage, creating a unique opportunity for the generation of 23 pipelines. Sixteen groups participated in WeFold3, creating 12 pipelines. The scale and diversity of the methods tried in WeFold could not have been achieved by any individual lab or even by any collaboration among a few partners. The number and diversity of the models amassed by the WeFold project cannot be found anywhere else. Even more importantly, WeFold has created a strong sense of community among its participants, with well-defined goals and purposes.

By analyzing WeFold2 and WeFold3 as two successive case studies, not only can we see that the first helped to shape the more successful second one, but also provide guidelines for future efforts. The scale of the WeFold collaboration and the richness of the gathered results highlight a new challenge: as we see new ways to improve the sampling (either by gathering models from different methods or by including citizen scientists), domain splitting, decoys set reduction, assessment and selection steps become bottlenecks that limit the success of the pipelines. Faced with the large scale and wide range of models, many of which are of mediocre quality, the clustering/filtering algorithms struggle and the assessment and selection algorithms largely fail to consistently select the best models produced. Most QA methods are trained on TBM models and they do not perform well on mediocre ones. Although these problems have been affecting the CASP methods in general, they are significantly magnified in the WeFold pipelines. For example, most methods are trained on server models and fail to generalize on a wide range of models created by a single group. We have collectively taken action to deal with these bottlenecks and the performance of the WeFold3 pipelines improved substantially as a result.

A number of WeFold3 pipelines stood up: wfRstta-BW-ModF6 outperformed ROSETTASERVER as well as the other WeFold pipelines in the TBM category. wfMESHI-TIGRESS performed slightly better than its non-WeFold counterpart MESHI, especially when considering model 1 and wfAll-Cheng performed consistently well in all categories. Efforts are underway to provide the codes for these pipelines to the public using GitHub or Jupyter notebooks.

An important goal of the project is to create an inclusive community that reaches out beyond CASP and brings into the field people, methods, disciplines, and technologies that can contribute to the solution of such a complex problem. This effort has produced results10 which show that the performance of the methods depends on the metric used and that certain features, such as GOAP36, have more significance than the method used, while others only add noise to the scoring function. Further efforts in improving QA are under development and the resulting methods will be tested in CASP1311.

One of the main problems of the WeFold experiment, which still needs to be addressed, is that the full pipelines are assembled on the first day of the CASP event and no prior benchmarking or testing is done, other than for the individual components. In some cases, this may result in suboptimal pipelines that cannot achieve peak performance and cannot compete with the individual group methods, which may have been heavily benchmarked before CASP. Nevertheless, despite these challenges, this paper shows that some of the tertiary structure prediction pipelines have ranked among the top performing groups in the CASP12 experiment.

The scale of the data garnered has also motivated us to leverage the power of ‘big data’ to our problems. We are working on significantly expanding the Keasar’s database10 to include a subset of the millions of models shared by our community. The vast number of models amassed, the collaboration among various labs, and the ability to attract outsiders with complementary expertise (e.g. machine learning) may give WeFold an edge to tackle the scoring and quality assessment problem. In fact, WeFold has great potential to bring protein structure prediction to the realm of data science and analytics.

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

## References

1. 1.

The UniProt Consortium. UniProt: the universal protein knowledgebase. Nucleic Acids Res. 45, D158–D169, http://www.uniprot.org (2017).

2. 2.

Berman, H. M. et al. The Protein Data Bank Nucleic Acids Research 28, 235–242, http://www.rcsb.org (2000).

3. 3.

Moult, J., Pedersen, J. T., Judson, R. & Fidelis, K. A large-scale experiment to assess protein structure prediction methods. Proteins: Struct, Funct, Bioinf 23(3), ii–iv (1995).

4. 4.

Moult, J. A decade of CASP: progress, bottlenecks and prognosis in protein structure prediction. Curr Opin Struct Biol 15(3), 285–289 (2005).

5. 5.

Moult, J., Fidelis, K., Kryshtafovych, A., Schwede, T. & Tramontano, A. Critical assessment of methods of protein structure prediction (CASP)–round x. Proteins 82(Suppl 2), 1–6, https://doi.org/10.1002/prot.24452 (2014).

6. 6.

Moult, J., Fidelis, K., Kryshtafovych, A., Schwede, T. & Tramontano, A. Critical assessment of methods of protein structure prediction: Progress and new directions in round XI. Proteins 84(Suppl 1), 4–14 (2016).

7. 7.

Khoury, G. et al. WeFold: A coopetition for protein structure prediction. Proteins: Structure, Function, and Bioinformatics 82(9), 1850–1868 (2014).

8. 8.

Crivelli, S., Dooley, R., Holmes, R. & Mock, S. The WeFold Gateway: Enabling Large-Scale Coopetition. 2013 IEEE International Conference on Cluster Computing (CLUSTER) 1(3), 23–27 (2013).

9. 9.

Crivelli, S., Dooley, R., Holmes, R. & Mock, S., The WeFold Community. Creating a Gateway that Enables Large-Scale Science Coopetition. Concurrency and Computation: Practice and Experience 27(2), 446–457, https://doi.org/10.1002/cpe.3270 (2015).

10. 10.

Mirzaei, S., Sidi, T., Keasar, C. & Crivelli, S, Purely Structural Protein Scoring Functions Using Support Vector Machine and Ensemble Learning. IEEE/ACM Transactions on Computational Biology and Bioinformatics Volume: PP Issue, 99, https://doi.org/10.1109/TCBB.2016.2602269 (2016).

11. 11.

Corcoran, T., Zamora-Resendiz, R., Liu, X. & Crivelli, S. A Spatial Mapping Algorithm with Applications in Deep Learning-Based Structure Classification, https://arxiv.org/pdf/1802.02532.pdf (2017).

12. 12.

Khatib, F. et al. Crystal structure of a monomeric retroviral protease solved by protein folding game players. Nat Struct Mol Biol 18(10), 1175–1177 (2011).

13. 13.

Zhang, Y. Interplay of I-TASSER and QUARK for template-based and ab initio protein structure prediction in CASP10. Proteins 82(Suppl 2), 175–187 (2014).

14. 14.

Liwo, A. et al. Simulation of protein structure and dynamics with the coarse-grained UNRES force field. In: Coarse-Graining of Condensed Phase and Biomolecular Systems, eds Voth, G. Taylor & Francis, Chapter 8, pp. 107–122 (2008).

15. 15.

Kamisetty, H., Ovchinnikov, S. & Baker, D. Assessing the utility of coevolution-based residue-residue contact predictions in a sequence- and structure-rich era. Proc. Natl. Acad. Sci. USA 110, 16674–16679 (2013).

16. 16.

Bacardit, J. et al. Contact map prediction using a large-scale ensemble of rule sets and the fusion of multiple predicted structural features. Bioinformatics 28(19), 2441–2448, https://doi.org/10.1093/bioinformatics/bts472 (2012).

17. 17.

Kieslich, C. A., Smadbeck, J., Khoury, G. A. & Floudas, C. A. conSSert: Consensus SVM models for accurate prediction of ordered secondary structure. J. Chem. Inf. Modeling 56, 455–461 (2015).

18. 18.

Murtagh, F. Multidimensional clustering algorithms. Compstat Lect Vienna Phys Verlag (1985).

19. 19.

Khoury, G. A. et al. Princeton_TIGRESS: ProTeIn Geometry REfinement using Simulations and Support vector machines. Proteins: Structure, Function, Bioinformatics (2014).

20. 20.

Chopra et al. Consistent refinement of submitted models at CASP using a knowledge-based potential. Proteins 78(12), 2668–78 (2010).

21. 21.

Heo, L., Park, H. & Seok, C. GalaxyRefine: Protein structure refinement driven by side-chain repacking. Nucleic acids research 41(Web Server issue), W384–388 (2013).

22. 22.

Lee, G. R, Heo, L. & Seok, C. Effective protein model structure refinement by loop modeling and overall relaxation, Proteins, in press, https://doi.org/10.1002/prot.24858.

23. 23.

Bhattacharya, D. & Cheng, J. 3D refine: Consistent protein structure refinement by optimizing hydrogen bonding network and atomic-level energy minimization. Proteins: Structure, Function, and Bioinformatics 81(1), 119–131 (2013).

24. 24.

Bhattacharyya, Moitrayee, Ghosh, Soma & Vishveshwara, Saraswathi Protein Structure and Function: Looking through the Network of Side-Chain Interactions. Current Protein and Peptide Science 17(1), 4–25 (2016).

25. 25.

Wang, Z., Eickholt, J. & Cheng, J. APOLLO: a quality assessment service for single and multiple protein models. Bioinformatics 27(12), 1715–1716 (2011).

26. 26.

McGuffin, L. J. The ModFOLD Server for the Quality Assessment of Protein Structural Models. Bioinformatics 24, 586–587 (2008).

27. 27.

Ray, A., Lindahl, E. & Wallner, B. Improved model quality assessment using ProQ2. BMC bioinformatics 13(1), 1 (2012).

28. 28.

Faraggi, E. & Kloczkowski, A. A global machine learning based scoring function for protein structure prediction. Proteins: Structure, Function, and Bioinformatics 82(5), 752–759 (2014).

29. 29.

Söding, J., Biegert, A. & Lupas, A. N. The HHpred interactive server for protein homology detection and structure prediction. Nucleic Acids Research 33(Web Server issue), W244–W248, https://doi.org/10.1093/nar/gki40 (2005).

30. 30.

Fidelis, K., Kryshtafovych, A. & Monastyrskyy, B. University of California, Davis. The CASP Prediction Center, 2007–2018, http://predictioncenter.org.

31. 31.

Song, Y. et al. High-resolution comparative modeling with RosettaCM. Structure, 21(10), 1735–1742 (2013).

32. 32.

Bradley, P., Misura, K. M. & Baker, D. Toward high-resolution de novo structure prediction for small proteins. Science 309, 1868–1871, PMID:16166519, https://doi.org/10.1126/science.1113801 (2005).

33. 33.

Maghrabi, A. H. A. & McGuffin, L. J. ModFOLD6: an accurate web server for the global and local quality estimation of 3D models of proteins. Nucleic Acids Research. https://doi.org/10.1093/nar/gkx332 (2017).

34. 34.

Zhang, J. et al. A multilayer evaluation approach for protein structure prediction and model quality assessment. Proteins: Structure, Function, and Bioinformatics 79(S10), 172–184 (2011).

35. 35.

MATLAB 8.0 and Statistics Toolbox 8.1, The MathWorks, Inc, https://www.mathworks.com/help/stats/ (Natick, Massachusetts, United States, 2018).

36. 36.

Zhou, H. & Skolnick, J. GOAP: a generalized orientation-dependent, all-atom statistical potential for protein structure prediction. Biophysical journal 101(8), 2043–2052 (2011).

## Acknowledgements

The authors would like to acknowledge the collaboration of hundreds of thousands of citizen scientists who contributed millions of decoys through the Foldit game. This research used significant resources of the National Energy Research Scientific Computing Center (NERSC), which is supported by the Office of Science of the U.S. Department of Energy under Contract number DE-AC02-05CH11231. L. Blake, I.D., and S.M. were supported in part by the U.S. Department of Energy, Office of Science, Office of Workforce Development for Teachers and Scientists (WDTS) under the Science Undergraduate Laboratory Internship (SULI) program and Visiting Faculty Program (VFP). C. Keasar and T.S. are grateful for support by grant no. 2009432 from the United States-Israel Binational Science Foundation (BSF) and grant no. 1122/14 from the Israel Science Foundation (ISF). D.B., J.L. and J.C. were supported by the National Institute of General Medical Sciences (R01GM093123). G.C. acknowledges the support of Purdue University start-up funds, Ralph W. and Grace M. Showalter Trust Award, and Jim and Diann Robbers Cancer Research Grant for New Investigators Award. Y.Z. is supported in part by the National Institute of General Medical Sciences (GM083107 and GM116960). Delbem lab is grateful for the support by Brazilian agencies: FAPESP, CAPES and CNPq. Y.H., Y.Y. and H.S. were funded by NIH Grant GM-14312 and NSF Grant MCB-10-19767. M. Levitt acknowledges the National Institutes of Medicine grant GM11574901 and is the Robert W. and Vivian K. Cahill Professor of Cancer Research. B.W. is supported by the Swedish Research Council (2012-5270 and 2016-05369) and Swedish e-Science Research Center. C. Czaplewski, A. Liwo, M. Mozolewska, P. Krupa were supported by grant UMO-2013/10/M/ST4/00640 from the Polish National Science Center. SVGrp acknowledges the computing facilities at MBU and SERC of IISc. Sambit Ghosh is supported by the IISc Mathematical Initiative Assistantship and SV is thankful to The National Academy of Sciences, India for Senior Scientist Fellowship. H.L. and D.X. were partially supported by National Institutes of Health grant R01-GM100701. C.A.F. acknowledges support from the National Institutes of Health (R01GM052032) and the National Science Foundation. G.A.K. is grateful for support by a National Science Foundation Graduate Research Fellowship under grant No. DGE-1148900. The authors gratefully acknowledge that the calculations reported in this paper were performed at the TIGRESS high performance computing center at Princeton University which is supported by the Princeton Institute for Computational Science and Engineering (PICSciE) and the Princeton University Office of Information Technology. J.B. acknowledges the support of the UK Engineering and Physical Sciences Research Council under grants EP/M020576/1 and EP/N031962/1. C.S., G.R.L., and L.H. acknowledge National Research Foundation of Korea, No. 2016R1A2A1A05005485. S.N.C. and the WeFold community are very grateful to NERSC and especially Shreyas Cholia and Francesca Verdier for their HPC support. SNC would like to thank Prof. Eric Chi for his advice on comparing the performance of the pipelines. We like to thank the Rosetta@home volunteers for providing the computing resources for Rosetta decoys.

## Author information

### Affiliations

1. #### Department of Computer Science, Ben Gurion University of the Negev, Be’er sheva, Israel

• Chen Keasar
•  & Tomer Sidi
2. #### Biomedical Sciences Division, School of Biological Sciences, University of Reading, Reading, RG6 6AS, UK

• Liam J. McGuffin
•  & Ali Hassan A. Maghrabi
3. #### Division of Bioinformatics, Department of Physics, Chemistry, and Biology, Linköping University, Linköping, Sweden

• Björn Wallner
4. #### Department of Chemistry, College of Science, Purdue University, West Lafayette, IN, USA

• Gaurav Chopra
5. #### Purdue Institute for Drug Discovery, Purdue University, West Lafayette, IN, USA

• Gaurav Chopra
6. #### Purdue Center for Cancer Research, Purdue University, West Lafayette, IN, USA

• Gaurav Chopra
7. #### Purdue Institute for Inflammation, Immunology and Infectious Disease, Purdue University, West Lafayette, IN, USA

• Gaurav Chopra
8. #### Purdue Institute for Integrative Neuroscience, Purdue University, West Lafayette, IN, USA

• Gaurav Chopra
9. #### Department of Electrical Engineering and Computer Science, University of Missouri, Columbia, MO, USA

• , Debswapna Bhattacharya
• , Renzhi Cao
• , Jie Hou
• , Hongbo Li
• , Jilong Li
• , Jianlin Cheng
•  & Dong Xu
10. #### Department of Computer Science and Software Engineering, Auburn University, Auburn, AL, USA

• Debswapna Bhattacharya
11. #### Lawrence Berkeley National Laboratory, Berkeley, CA, USA

• Lauren Blake
• , Itzhel Dimas
• , Shokoufeh Mirzaei
•  & Silvia N. Crivelli
12. #### Laboratory of Biological Physics, Faculty of Pharmaceutical Sciences at Ribeirão Preto, University of São Paulo, São Paulo, Brazil

• Leandro Oliveira Bortot
13. #### Molecular Biophysics Unit and IISC Mathematics Initiative, Indian Institute of Science, Bangalore, India

• B. K. Dhanasekaran
• , Sambit Ghosh
• , Soma Ghosh
•  & Saraswathi Vishveshwara
14. #### Institute of Mathematical and Computer Sciences, University of São Paulo, São Paulo, Brazil

• Rodrigo Antonio Faccioli
• , Alexandre Defelicibus
•  & Alexandre Cláudio Botazzo Delbem
15. #### Research and Information Systems, LLC, Carmel, IN, USA

• Eshel Faraggi
16. #### Department of Biochemistry and Molecular Biology, IU School of Medicine, Indianapolis, IN, USA

• Eshel Faraggi
17. #### Batelle Center for Mathematical Medicine, The Research Institute at Nationwide Children’s Hospital, Columbus, OH, USA

• Eshel Faraggi
18. #### Faculty of Chemistry, University of Gdansk, Gdańsk, Poland

• Robert Ganzynkowicz
• , Artur Giełdoń
• , Lukasz Golon
• , Pawel Krupa
• , Agnieszka Lipska
• , Magdalena A. Mozolewska
• , Magdalena Ślusarz
• , Rafal Ślusarz
• , Tomasz Wirecki
• , Bartlomiej Zaborowski
• , Cezary Czaplewski
•  & Andrzej Kloczkowski

• Yi He
20. #### Department of Chemistry, Seoul National University, Seoul, Republic of Korea

• Lim Heo
• , Gyu Rie Lee
•  & Chaok Seok
21. #### Department of Computer and Information Science, University of Massachusetts Dartmouth, MA, USA

• Main Khan
• , Firas Khatib
• , Anand Shah
•  & Nicholas Trieber
22. #### Department of Chemical and Biological Engineering, Princeton University, Princeton, NJ, USA

• George A. Khoury
23. #### Texas A&M Energy Institute, Texas A&M University, College Station, TX, USA

• Chris Kieslich
• , Phanourios Tamamis
•  & Christodoulos Floudas
24. #### Department of Biochemistry, University of Washington, Seattle, WA, USA

• David E. Kim
• , Sergey Ovchinnikov
• , Brian Koepnick
•  & David Baker
25. #### Howard Hughes Medical Institute, University of Washington, Seattle, WA, USA

• David E. Kim
•  & David Baker

• Hongbo Li

• Hongbo Li
•  & Dong Xu
28. #### Max Planck Institute for Biophysical Chemistry, Göttingen, Germany

• Milot Mirdita
•  & Johannes Söding
29. #### California State Polytechnic University, Pomona, CA, USA

• Shokoufeh Mirzaei
30. #### Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, TX, USA

• Melis Onel
• , Utkarsh Shah
•  & Phanourios Tamamis
31. #### Institute for Protein Design, University of Washington, Seattle, WA, USA

• Sergey Ovchinnikov
32. #### Baker Laboratory of Chemistry and Chemical Biology, Cornell University, Ithaca, NY, USA

• Yanping Yin
•  & Harold Scheraga

• Yang Zhang
34. #### Interdisciplinary Computing and Complex BioSystems (ICOS) research group, School of Computing, Newcastle University, Newcastle-upon-Tyne, UK

• Jaume Bacardit
35. #### Intercollegiate Faculty of Biotechnology, University of Gdańsk and Medical University of Gdańsk, Gdańsk, Poland

• Maciej Baranowski
•  & Stanislaw Ołdziej
36. #### Center for Game Science, Department of Computer Science & Engineering, University of Washington, Seattle, WA, USA

• Nicholas Chapman
• , Jeff Flatten
• , Zoran Popović
•  & David Baker
37. #### College of Computer and Information Science, Northeastern University, Boston, MA, USA

• Seth Cooper
38. #### Department of Structural Biology, School of Medicine, Stanford University, Stanford, CA, USA

• Michael Levitt
39. #### Department of Computer Science, University of California, Davis, CA, USA

• Silvia N. Crivelli
40. #### Rosetta Commons, University of Washington, Seattle, Washington, 98195, USA

• Ahmet Caglar
• , Alan Coral
• , Alison MacMillan
• , Allen Lubow
• , Barbara Failer
• , Bruno Kestemont
• , Catherine R. Landers
• , Charles Robert Painter
• , Christophe Garnier
• , Claudine Sellin
• , Dietmar Janz
• , Douglas Craig Wheeler
• , Vera Simon
• , Dylan M. Flear
• , Emmanuel Croze
• , George Victor McIlvaine
• , Gil Beecher
• , Gordon Lawrie
• , Guy Ykman
• , Harald Feldmann
• , Heidemarie K. Fuentes
• , Hosokawa Terumasa
• , Istvan Kovanecz
• , James Absalom Longino III
• , Jan Hendrik Nijland
• , Jasper A. Diderich
• , Jeffrey M. Canfield
• , Jesper Eriksson
• , Jesse David Slone
• , Joan Goldsworthy Appel
• , Joanne Mitchell
• , John Mitch
• , Jorn Loots-Boiy
• , June M. Brownlee
• , Karsten Wilson
• , Keith T. Clayton
• , Kenneth E. DeFord
• , Kirk J. Abbey
• , Larry Withers
• , Linda Wei
• , Lloyd Ives
• , Lori A. Miller
• , Lynn Carpenter
• , Manasa G. Sharma
• , Manuel Ricci
• , Mark Stewart Binfield
• , Matthew John Davids
• , Matthias Gaebel
• , Michael D. Cassidy
• , Michael Fagiola
• , Michael Pfützenreuter
• , Nova Barlow
• , Peter John Triggiani IV
• , Renton Braden Mathew Innes
• , Robert Leduc
• , Rodrigo Luccas Corrêa dos Santos Gomes
• , Rosemarie L. R. Morneau
• , Scott J. Zaccanelli
• , Susan C. Kleinfelter
• , T. J. A. van der Laan
• , Thomas Bausewein
• , Thomas J. George
• , Varichev Mikhail
•  & Walter Barmettler

### Contributions

S.N.C. conceived the We Fold project and wrote the paper in collaboration with C.K. C.K. conceived Figures 1–5 and Figure 9. L.M.c.G., B.W., G.C., J.C., C.S., F.K., C.K., J.L., A. Liwo, D.X., also contributed to the preparation of the paper. I.D. and L. Blake worked on the large-scale analyses that produced Figures 6–8 (Blake) and 10 (Dimas) under the supervision of S.N.C. Dimas was also guided by D.K. B.W. worked on Tables 3. D. Bhattacharya, L. Bortot, G.C., R.F., E.F., Sambit and Soma Ghosh, Y.H., L.H., C.K., F.K., G.K., C.K., P.K., J.L., A. Lipska, A. Liwo, L.M.c.G., M.A.M., S.O., M.P., G.R., A.S., M.S., R.S., J.S., P.T., B.W., T.W., Y.Y., Y.Z., M.B., C.C., R.G., A.G., S.O., B.K. and B.Z., performed the research. F.K., A. Liwo, D. Baker, J.C., A.D., C.A.F., A.K., H.A.S., C.S., S.V., D.X. and S.N.C. supervised the research. The corresponding lab members participated in the pipelines by contributing their published methods and CPU time to the collaboration. All authors have read and approved the paper.

### Competing Interests

The authors declare no competing interests.

### Corresponding author

Correspondence to Silvia N. Crivelli.