We describe here a partial skull with associated mandible of a large felid from Monte Argentario, Italy (Early Pleistocene; ~1.5 million years). Propagation x-ray phase-contrast synchrotron microtomography of the specimen, still partially embedded in the rock matrix, allows ascribing it reliably to Acinonyx pardinensis, one of the most intriguing extinct carnivorans of the Old World Plio-Pleistocene. The analysis of images and 3D models obtained through synchrotron microtomography – here applied for the first time on a Plio-Pleistocene carnivoran – reveals a mosaic of cheetah-like and Panthera-like features, with the latter justifying previous attributions of the fossil to the extinct Eurasian jaguar Panthera gombaszoegensis. Similarly, we reassign to A. pardinensis some other Italian materials previously referred to P. gombaszoegensis (sites of Pietrafitta and Ellera di Corciano). The recognition of Panthera-like characters in A. pardinensis leads to reconsidering the ecological role of this species, whose hunting strategy was likely to be different from those of the living cheetah. Furthermore, we hypothesise that the high intraspecific variation in body size in A. pardinensis can be the result of sexual dimorphism, as observed today in all large-sized felids.
The Villafranchian Land Mammal Age (LMA) is a biochronological unit based on large mammals roughly spanning from the late Pliocene to most of the Early Pleistocene (about 3.5–1.0 million years; Ma)1. The mammal assemblages that characterised Villafranchian Europe were the result of the deep faunal turnover occurring between the early and late Pliocene in response to a global glaciation process involving the development of the first ice sheets in Greenland2. This general cooling trend coincided with the setting of the modern Mediterranean climate, resulting in significant variations in vegetation3 and, consequently, in the herbivore community. The latter experienced the extinction of a number of taxa adapted to the Miocene and early Pliocene warm and humid average conditions and the dispersal of several newcomers from Africa and Asia2. These changes deeply affected also the carnivore guild, and the large felids in particular. At the beginning of the Villafranchian LMA, at least four new large felid taxa appear: the sabretooths Homotherium and Megantereon4, the first member of the puma lineage Puma pardoides5, and the cheetah-like cat Acinonyx pardinensis6. The latter species (Fig. 1) is probably one of the most intriguing and iconic extinct carnivorans of the Old World Plio-Pleistocene.
The earliest fragmentary fossils of cheetah-like felids in Europe were discovered in the Puy de Dôme area, France (La Côte d’Ardé and Les Étouaires sites) in the first half of the 19th century7,8. However, it is necessary to wait more than a hundred years to get well-preserved cranial material, unearthed in the French site of Saint Vallier9. Viret9 acknowledged that all the remains discovered until then in Europe could be included in a single species, which he calls Acinonyx pardinensis in light of the many morphological affinities with the living African cheetah Acinonyx jubatus. To date, A. pardinensis has been reported in more than 35 locations in Eurasia and North Africa, covering a long chronological interval (about 2.5 Ma) from the late Pliocene to the Middle Pleistocene6. This sample includes also the Chinese specimens referred to Sivapanthera pleistocaenicus and S. linxiaensis by some authors10,11, but later recognized as belonging to A. pardinensis6,12.
The ecological role of A. pardinensis in the Villafranchian carnivoran guild is matter of debate. The few available postcranial material8,13,14,15 would suggest that A. pardinensis had slender body proportions similar to those of A. jubatus, though the fossil species was characterised by double body mass (~80 vs. ~40 kg on average, respectively)6. However, it is not possible to demonstrate whether the body structure of A. pardinensis was correlated to predatory adaptations based on high speed in open environments as in the extant cheetah15. On the contrary, the recent discovery of outstanding cranial material from Pantalla, Italy6 and the reappraisal of the specimens from Saint Vallier12 have led to reconsidering the skull anatomy and predatory behaviour of A. pardinensis. The craniodental morphology and the development of jaw muscles associated with the large body size, suggest that A. pardinensis could kill large prey with a hunting strategy akin to those of pantherine felids, rather than that of the cheetah6. This hypothesis is supported by recent analysis16 of the inner ear anatomy of extant and extinct felids, according to which the vestibular system of modern cheetahs is unique in showing adaptations to facilitate visual and postural stability during high-speed prey pursuits and is extremely different in shape and proportions relative to other species, including A. pardinensis.
The felid partial skull with associated mandible discovered in the Late Villafranchian site of Monte Argentario (Tuscany, Italy) (Fig. 2) represents a key specimen for understanding this species’ functional morphology. Indeed, it shows a mosaic of intermediate characters between Acinonyx (e.g., the shortened snout) and Panthera (e.g., the massive canines). The latter features have led in the past to refer the skull to the leopard Panthera pardus17 and later to a female individual of the Pleistocene Eurasian jaguar Panthera gombaszoegensis18. However, the hard rock concretion in which the skull is embedded prevents a detailed analysis of its morphology. For this, it was necessary to resort to the most advanced technologies available in the field of tomographic investigations.
The recent diffusion of x-ray-based tomographic methods has opened new frontiers in palaeontology. For the first time, fossils can be virtually extracted from their host matrix and dissected, thus offering plenty of information on their external and internal morphology down to the micrometre scale. Obtaining 3D images can be easily achieved through computed tomography (CT) medical scanners, but these devices can provide limited spatial resolution (i.e. not smaller than 0.5 mm). Laboratory microtomography (µCT) has also been used in recent years for the study of fossils. However, despite the very good resolution of some of these machines, their polychromatic x-ray source is not suitable for analysing some fossils, such as highly mineralized samples with very low absorption contrast. The top technology available today for this kind of study is the scanning of fossils with synchrotron radiation (SR). The physical properties of the hard x-rays used for synchrotron microtomography (SR-µCT) (i.e., monochromaticity, high beam intensity and partial coherence) allow increasing significantly the data quality and imaging possibility compared to any other x-ray-based scanner19.
Here, we report on the results of the microtomographic analysis of the felid skull from Monte Argentario based on SR technology (applied for the first time on a Plio-Pleistocene carnivoran) and discuss about the morphological variation and ecology of A. pardinensis.
The specimen (ArgBsc1) is represented by the rostral portion of the skull with associated mandible of a large felid (Fig. 2, Table 1). The neurocranium is almost completely missing, with only a small portion of the left frontal bone being visible. The splanchnocranium is better preserved on the left side, from which it looks rather shortened and dorsoventrally expanded. The zygomatic arches are lacking, as well as the orbits, with the exception of the dorsal margin of the left one, which is delimited by the postorbital process of the frontal. In rostral view, the nasal apertures look broad though slightly distorted, with the median part of the nasal bones being crushed into the nasal cavities. The mandible preserves the complete right corpus articulated with the anterior portion of the left one, broken at the level of the distal margin of the p4. Two mental foramina are visible on both sides, located at the same height immediately behind the distal margin of the lower canine and a few centimetres behind, respectively. Both the ascending rami are lost.
The teeth are virtually unworn and in variable state of conservation. Only the roots of the right I3 and i3 are visible in rostral view. The left canines are missing, but the distoventral portion of the lower canine root is still preserved, delimiting a wide pulp cavity. Conversely, the canines on the right side are almost intact and stand out to be robust and elongated. A short distance separates the upper canine from the P3. The latter is broken on the right side, but complete on the left. It is characterised by a high, vertical, and pointed paracone. The right P4 is a large and robust tooth. In labial view, it shows, from front to back, a strong parastyle, a high and vertically-oriented paracone and a slightly shorter metacone. The root of the small M1 is visible distally to the right carnassial. With the exception of the canine, the other lower teeth are impossible to describe because they are covered by the upper teeth or the embedding matrix. The latter is a highly consolidated red-rust coloured claystone very hard to remove mechanically without the risk of damaging the fossil. This led to the need to examine the specimen through a highly performing x-ray image analysis technique.
Observations with SR-µCT
The scanning of the felid skull through SR at the European Synchrotron Radiation Facility (see ‘Methods’) allowed obtaining extremely clear and detailed images of the outer and inner structure of the specimen. By processing these images, we reconstructed a high-resolution 3D model of the skull, from which the matrix (coloured in brown in Fig. 3) can be digitally removed thanks to the segmentation process (see ‘Methods’).
The virtual model reveals many additional morphological details. Although the dorsal part of the skull is damaged, it was possible to three-dimensionally reconstruct the anterior portion of the left frontal sinus (coloured in yellow in Fig. 3). In ventral view, after removing virtually the mandible, the palate appears flat and wide. Rostrally, two relatively broad and elongated palatine fissures are visible. Palatal sutures are very well exposed. The suture between the palatal processes of the premaxilla and maxilla is divided into two segments by the palatine fissure. The lateral segment runs from the mid lingual margin of the canine alveolus to the caudolateral margin of the palatine fissure, describing a right angle; the medial segment runs steep towards the median palatine suture and forms a V shape with the homologous segment on the opposite side. The transverse palatine suture has a characteristic irregular pattern, with an indentation towards the medial side in the caudolateral part (in correspondence of the distal portion of P4) and another caudally-oriented indentation in the rostral part (which describes a W shape with the suture segment on the opposite side). The virtually reconstructed skull in Fig. 4 was obtained through the mirroring of the best-preserved portions on the opposite sides (i.e., the left orbital/frontal area was mirrored on the right side and the right premaxilla, maxilla, nasal fragments, and mandible were mirrored on the left side). Observing this model in rostral view, it can be noticed that (1) the nasal openings are actually narrower than they could appear on the original fossil, (2) the upper canines are housed in prominent canine eminences, and (3) the frontal region between the postorbital processes is rather narrow. The mandible is shortened and slender on the whole. In occlusal view, the symphysis is short and the corpi form a relatively wide angle. The right corpus is straight both in occlusal and labial view. From the latter perspective, the rostroventral margin of the mandible appears squared.
The processing of SR-µCT images allowed to obtain single 3D models of all the teeth (Fig. 5) and separate them from the rest of the skull to facilitate the description. In occlusal view, the upper canine appears long and stout. The P3 is quite narrow and shows a small distolingual protocone. In the distal part of the tooth, a well-developed distal accessory cusp is aligned with the large and vertical paracone and the cusp-like distal cingulum is well defined. A small mesial accessory cusp is also visible on the left P3. The P4 shows a strongly reduced protocone, which has the appearance of a simple mesiolingual swelling of the crown. Two small circular alveoli reveal the previous presence of the P2 on both sides, which was strictly included between the upper canine and the P3. As for the lower teeth, the crowns of p3, p4, and m1 have almost the same height in labial view. The premolars show a ‘fleur-de-lis’ morphology, since the paraconid and the hypoconid diverge mesially and distally, respectively, from the dominant lanceolate protoconid. Both the p3 and p4 show a distinct distal cingulum. The length of the lower postcanine teeth increases gently from p3 to m1. In the latter, the sharp and triangular protoconid and paraconid have almost the same length. Distal to the protoconid, there is a well-defined talonid bearing a small tubercle in line with the main blade. In occlusal view, they are very close to each other so as to be partially overlapped. the distal portion of both premolars is wider than the mesial one.
The analysis of µCT images evidenced the presence of an isolated tooth lying against the left lateral surface of the palate (Fig. 5e–h). The tooth is the left i3, which apparently slipped out of its alveolus before the final lithification of the enclosing sediments. Similarly, some kind of pre-diagenetic stress must have pushed towards the cranium the left p4, which came out partially from the alveolus and pierced the palatine process of the left maxilla with its pointed protoconid (Fig. 6a–b). A tiny supernumerary root develops on the labial side of the right p3 where the two main roots join the crown (Fig. 6c–d). Its reduced size and the absence of the pulp cavity indicate that it is a non-functional root. Such a condition has been reported in some extant and fossil carnivorans20,21,22,23, although the origin of this anomaly is not clear because patterning mechanism of the root position and number is still poorly known24.
The identification of the specimen (ArgBsc1) based solely on external observation is hard, since the enclosing in the rock matrix makes very difficult the analysis of diagnostic characters, especially in the teeth. From the outside, the skull shows a series of intermediate Acinonyx-like and Panthera-like characters. The first include the high and short muzzle, the straight ventral margin and the right rostroventral angle of the mandible. The second include the relatively narrow frontals and especially the massive canines, mainly the upper ones, housed in prominent canine eminences. In particular, the latter characters might have led to the past erroneous attribution of the specimen to P. gombaszoegensis18, whose stratigraphic occurrence partially overlaps that of A. pardinensis. This may have been due also to the limited past knowledge of this taxon’s anatomy, which has increased significantly thanks to new discoveries in recent decades. In this regard, it is worth mentioning two other cases of misleading identification involving the same taxa. The first concerns Pietrafitta, a central Italian site with an age comparable to that of Monte Argentario25, the second the slightly older locality of Ellera di Corciano26. The scarce felid material from the two sites were referred in the past to P. gombaszoegensis27,28,29,30 and cf. P. gombaszoegensis31,32, respectively. The fossils are here reassigned to A. pardinensis (Supplementary Note 1 and Supplementary Figs S1–S2).
The study of images obtained through the SR-µCT survey resulted in many additional information for the definition of the taxonomic status of the Monte Argentario skull. The following craniodental features identified on the 3D models of ArgBsc1 are consistently found in the other specimens attributed to A. pardinensis6,12,33 and differ from pantherine felids:
Short and wide palate;
Relatively short and slender mandible, with reduced diastema between the lower canine and the p3 and short symphysis;
Crowded and partially overlapped upper and lower postcanine teeth;
Narrow P3 with sub-parallel labial and lingual margins in occlusal view, and high, pointed, and sub-vertical paracone;
P4 characterised by the strong reduction of the protocone, which is only slightly protruding lingually and appears like a prolongation of the lingual root toward the crown base;
Cuspids of p3 and p4 exhibiting a ‘fleur-de-lis’ morphology;
Lower postcanine teeth with similar crown height in labial view.
Similarly, most of the above characters allow to exclude that the Monte Argentario specimen can be referred to the late Pliocene-Early Pleistocene puma-like felid Puma pardoides34,35. In fact, although the latter species shows some similarities with A. pardinensis (e.g., lateral enlargement of the frontals caudally to the zygomatic processes and relatively shortened muzzle)6,33, differences between them are remarkable (e.g., Pu. pardoides has labiolingually enlarged P3, P4 with strong Panthera-like protocone, p3 significantly lower than p4 in labial view both showing more massive protoconid)5,6. Moreover, the overall size of Pu. pardoides is significantly smaller than that of A. pardinensis (the upper carnassial of Pu. pardoides is about 22 mm in average length5, while that of A. pardinensis is about 30 mm6).
In the light of the above features, the felid from Monte Argentario is here referred to A. pardinensis.
However, the occurrence of Panthera-like characters in the skull is noteworthy. Among them, the presence of stout and strong canines stands out. The linear dimensions (length and breadth) of these teeth fall in the uppermost part of the A. pardinensis range and, at least for the upper canine, are close to the lower values recorded for medium-sized pantherines like P. gombaszoegensis (Supplementary Tables S1–S2 and Supplementary Fig. S3). Similarly, the comparative analysis of the palatal sutures (clearly visible in ArgBsc1 for the first time in A. pardinensis) evidences further affinities with pantherine cats. In particular, the indented suture trend observed in the Monte Argentario skull recalls more the extant leopard and snow leopard than the cheetah and puma (Supplementary Fig. S4).
Previous studies6,10,12 already highlighted that A. pardinensis retains Panthera-like, primitive morphological characters, but most of them relate to the neurocranium (e.g., the relatively elongated braincase, with high sagittal and nuchal crests and—as also visible in ArgBsc1—narrow frontals between the postorbital processes). The specimen from Monte Argentario shows some significant pantherine-like characters also in the splanchnocranium (i.e., teeth and palatal sutures). Nevertheless, at least as regards to canine dimensions, our results should be placed in the context of the overall A. pardinensis intraspecific variation. As in part predictable by the long-lasting stratigraphic distribution (from late Pliocene to Middle Pleistocene) and the wide geographical distribution (from Morocco to China), A. pardinensis exhibits a considerable variation in size, with body mass estimated (for adult individuals) from about 60 to 120 kg (Supplementary Table S3 and Supplementary Fig. S4). This variation led some scholars15,33,36 to consider A. pardinensis as a broad ‘macrospecies’ subdivided into several subspecies6: A. p. arvernensis from Les Étouaires (late Pliocene) and Tuozidong (early Early Pleistocene); A. p. aicha from North Africa (earliest Pleistocene); A. p. pardinensis from a number of European to central Asian sites (Early Pleistocene; Middle-Late Villafranchian LMA); A. p. linxiaensis (=‘Sivapanthera’ linxiaensis)10 from northern China (early Early Pleistocene); A. p. pleistocaenicus from Untermassfeld (late Early Pleistocene; Epivillafranchian stage)37 and China (=‘Sivapanthera’ pleistocaenica)11 (Early Pleistocene; Villafranchian LMA); A. p. intermedius from Hundsheim and Mosbach (Middle Pleistocene; Galerian LMA). However, the validity of this taxonomic model is questioned by the lack of clear morphological or biometrical differences between the different subspecies. The available estimated body masses for A. pardinensis suggest that the variation found is independent of the age and the geographical location of the finds (Supplementary Fig. S5). An emblematic case is represented by the earliest (i.e., Early Villafranchian LMA) European specimens attributed to this taxon, namely those of Villafranca d’Asti (Supplementary Fig. S6), Villarroya, and Les Étouaires, for which the predicted body masses are 70, 87, and 121 kg, respectively. Unfortunately, the existing data are not sufficient to understand if the intraspecific variation of A. pardinensis could be linked to ecogeographical dynamics and/or sexual dimorphism. However, actualistic comparisons with extant large-sized felids allow to hypothesise that the latter factor can be called into question for A. pardinensis. Sexual dimorphism in body mass occurs in all living felids, and is particularly marked in wide-range large-sized species. For example, the average weight difference between males and females is about 60% in the jaguar, 80% in the leopard, 85% in the lion and the tiger, and even 90% in the puma, while it is much smaller (~15%) in the cheetah38. We obtain interesting information if we try to free the interpretations on A. pardinensis from the stratigraphic influence, that is if we consider the few available sites for which it is possible to estimate body mass for more than one individual (which we can therefore hypothesise as being coeval). The difference between the lowest and highest predicted body mass is about 31% at Ahl al Oughlam, 33% at Saint Vallier, and 72% at Longdan. This suggests that sexual dimorphism may have played an important role in the intraspecific variation of A. pardinensis, as hypothesised by Petrucci et al.39 based on postcranial material from Pirro Nord. Although out of the scope of this work, the same can be said for the Eurasian jaguar P. gombaszoegensis, whose predicted body masses span from about 65 to 180 kg in all its chronological (about 1.9–0.3 Ma) and geographic (Europe and Western Asia) range, with peaks of variation of ~80% and even 90% for local samples such as those from the type locality of Gombaszög and Untermassfeld, respectively (Supplementary Table S4).
Acinonyx pardinensis and P. gombaszoegensis co-occurred in Europe for about 1.4 Ma in the Early and Middle Pleistocene, and are reported together in at least seven sites (Olivola, Dmanisi, Upper Valdarno, Pirro Nord, Untermassfeld, Le Vallonnet, and Mosbach, in decreasing stratigraphical order), often in association with sabretooth cats like Megantereon and/or Homotherium6,39,40. This extraordinary concentration of large felids is unequalled in modern ecosystems and, moreover, must be included in the context of the rich diversity of the Late Villafranchian/Epivillafranchian large carnivore guilds, which included, among others, also hyaenids and canids41. Interspecific competition for prey must have been strong in such palaeoecosystems and subject to ecological mitigation strategies. These could have included temporal niche displacement (e.g., diurnal/nocturnal hunting) and/or different spatial distribution within the ecosystem6 (for example, in Venta Micena, geochemical data suggest that Megantereon and Panthera preferred forested areas whereas Homotherium and Lycaon hunted in more open habitats)42. The recognition of pantherine-like characters in the Monte Argentario felid—as well as in other A. pardinensis samples from other localities—must lead to reconsidering the ecological role of this species, whose choice of prey and hunting strategy was likely to be different from those of the living cheetah6,16. Furthermore, we hope that the approach followed in this work, i.e., the use of high-resolution µCT techniques, may also be followed in the future for similar cases, in order to extract as much information as possible from fossil remains of Plio-Pleistocene vertebrates.
The investigated specimen of A. pardinensis (ArgBsc1) is housed in the PaleoFactory, Sapienza University of Rome (Italy). The analytical study of the fossil has been carried out in 2015 in agreement with the former Archaeological Superintendence of Tuscany (Italy).
Monte Argentario is a small promontory on the Tyrrhenian coast of southern Tuscany (Italy). The outcropping Permian-Triassic limestones and dolomites43 were subjected by karst processes in recent geological times. Karst cavities and fissures are filled by strongly cemented conglomerates and red clay-sand layers25. In the locality of “Miniera della Polveriera”17, the latter layers yielded a diversified assemblage of terrestrial vertebrates referred to the Late Villafranchian LMA (Farneta-Pirro Faunal Units; ~1.5 Ma)25,44. The assemblage includes the following taxa: Large mammals18,44,45,46—Ursus etruscus, Canis sp., Pachycrocuta brevirostris, Lynx issiodorensis, Acinonyx pardinensis, Homotherium sp., Megantereon whitei, Stephanorhinus cf. S. hundsheimensis, Pseudodama sp., Leptobos sp., Soergelia cf. S. minor, Bovidae indet. Small mammals25—Talpa cf. T. fossilis, Sorex cf. S. minutus, Petenyia hungarica, Asoriculus gibberodon, Oryctolagus cf. O. valdarnensis, Eliomys cf. E. intermedius, Glis sackdillingensis, Microtus (Allophaiomys) cf. M. (A.) ruffoi, Victoriamys chalinei, Apodemus (Sylvaemus) sylvaticus, Apodemus (S.) flavicollis, Apodemus (S.) gr. sylvaticus-flavicollis, and Apodemus (Karstomys) gr. mystacinus-epimelas. Birds25—Anas sp., Alectoris cf. A. graeca, Porzana parva vel P. pusilla, Columba livia vel C. oenas, Bubo sp., Passeriformes indet. Reptiles25—Lacerta sp. Lacertilia indet., “Colubrines” indet., Vipera sp., Serpentes indet. Amphibians25—cf. Bufo bufo.
The skull was characterised using propagation phase contrast synchrotron microtomography at the ID17 beamline of the European Synchrotron Radiation Facility (ESRF, Grenoble, France; proposal HG37). The setup consisted of a monochromatic beam (double bent Laue) at 135 keV using a Wiggler 150 (gap 24.9 mm) in 16 bunch mode, 2.56 mm of vitreous carbon and 5.59 mm of Cu to reduce the heat load on the monochromator, 10 m of propagation between the sample and the detector, and an optical system producing data with a pixel size of 46.19 µm (scintillating optical fibre, ~0.26x magnification set of lenses, FReLoN-2k in frame transfer mode). As the skull did not fit in the horizontal field of view (FOV), the rotation axis was shifted from the centre of the image toward the right edge of the FOV by ~37 mm (i.e., half-acquisition protocol). The tomographic acquisition consisted of 8000 projections (to accommodate the increase of the reconstructed slices in half-acquisition) of 0.2 seconds each over 360°, 101 projections for flat field images and 100 images for the dark noise correction. Given the limited vertical FOV (5.54 mm) several scans were needed, moving the specimens along the vertical axis of the sample stage in between each scan. In order to correct for the vertical profile of the x-ray beam and provide useful data for ring artefact correction, the samples were moved each time by 2.5 mm, hence offering an overlap of 50% of two consecutive scans. In this configuration, 75 scans were necessary to scan the specimen. During the vertical stitching of the scans, done on the reconstructed slices, the overlapping part was handled by a weighted average, giving more weight to slices reconstructed from the centre of the projections. The tomographic reconstruction was done using PyHST247, first as a stack of 32-bit data. Then the dynamic range was changed to 16 bits using the min and max 0.2% saturation values from the 3D histogram calculated by PyHST2. The 16-bit stacks of tiff were stitched together and finally a ring correction was applied48.
2,009 slices were obtained, which were downsampled by half and segmented using the software Materialise Mimics (version 17.0). The 3D rendering of the model of ArcBsc1 and the partial reconstruction of the missing portions of the skull were performed using the software ZBrush (version 4R6). All the missing parts of the specimen were cloned and mirrored from those preserved, and their alignment and positioning were performed following the sagittal plane of the skull. Finally, the reconstructed portions were highlighted using a different colour.
Rook, L. & Martínez-Navarro, B. Villafranchian: the long story of a Plio-Pleistocene European large mammal biochronologic unit. Quat. Int. 219, 134–144 (2010).
Agustí, J. & Antón, M. Mammoths, Sabertooths, and Hominids: 65 Million Years of Mammalian Evolution in Europe (Columbia, 2002).
Bertini, A. Pliocene to Pleistocene palynoflora and vegetation in Italy: state of the art. Quat. Int. 225, 5–24 (2010).
Antón, M., Sabertooths (Indiana, 2013).
Cherin, M., Iurino, D. A. & Sardella, R. Earliest occurrence of Puma pardoides (Owen, 1846) (Carnivora, Felidae) at the Plio/Pleistocene transition in Western Europe: new evidence from the Middle Villafranchian assemblage of Montopoli, Italy. C. R. Palevol 12, 165–171 (2013).
Cherin, M., Iurino, D. A., Sardella, R. & Rook, L. Acinonyx pardinensis (Carnivora, Felidae) from the Early Pleistocene of Pantalla (Italy): predatory behavior and ecological role of the giant Plio-Pleistocene cheetah. Quat. Sci. Rev. 87, 82–97 (2014).
Croizet, J. B. & Jobert, A., Recherches sur les ossemens fossiles du département du Puy-de-Dôme (Thibaud-Landriot, 1828).
Schaub, S. Revision de quelques carnassiers villafranchiens du Niveau des Etouaries (Montagne de Perrier, Puy-de-Dôme). Eclogae Geol. Helvetiae 42, 492–506 (1949).
Viret, J. Le loess à banc durcis de Saint-Vallier (Drôme) et sa faune de mammifères villafranchiens. Avec une analyse granulométrique. Nouv. Arch. Mus. Hist. Nat. Lyon 4, 1–200 (1954).
Qiu, Z., Deng, T. & Wang, B. Early Pleistocene Mammalian fauna from Longdan, Dongxiang, Gansu, China. Palaeontol. Sin. 191, 1–198 (2004).
Qiu, Z. Quaternary environmental changes and evolution of large mammals in North China. Vertebr. PalAsiatica 4, 109–132 (2006).
Geraads, D. How old is the cheetah skull shape? The case of Acinonyx pardinensis (Mammalia, Felidae). Geobios 47, 39–44 (2014).
Ficcarelli, G. The Villafranchian cheetahs from Tuscany and remarks on the dispersal and evolution of the genus. Acinonyx. Palaeontogr. Ital. 73, 94–103 (1984).
Hemmer, H. Die feliden aus dem Epivillafranchium von Untermassfeld. Monographien Römisch-Germaisches Zentralmuseum Mainz 40, 699–782 (2001).
Hemmer, H., Kahlke, R. D. & Vekua, A. K. The cheetah Acinonyx pardinensis (Croizet et Jobert, 1828) s.l. at the hominin site of Dmanisi (Georgia) e a potential prime meat supplier in Early Pleistocene ecosystems. Quat. Sci. Rev. 30, 2703–2714 (2011).
Grohé, C., Lee, B. & Flynn, J. J. Recent inner ear specialization for high-speed hunting in cheetahs. Sci. Rep. 8, 2301 (2018).
Baschieri, F. & Segre, A. G. Notizie sul ritrovamento di fauna a Rinoceronte etrusco e Macairodo all’Argentario (prov. di Grosseto). Quaternaria 4, 195–197 (1957).
Sardella, R. The late villafranchian Panthera ex gr. toscana-gombaszoegensis from Monte Argentario (Grosseto, South Tuscany, central Italy). Cour. Forsch. Senck. 256, 23–27 (2006).
Tafforeau, P. et al. Applications of X-ray synchrotron microtomography for non-destructive 3D studies of paleontological specimens. Appl. Phys. A 83, 195–202 (2006).
Verstraete, F. J. M., Van Aarde, R. J., Nieuwoudt, B. A., Mauer, E. & Kassw, P. H. The dental pathology of feral cats on Marion island, part I: congenital, developmental and traumatic abnormalities. J. Comp. Pathol. 115, 265–282 (1996).
Hauer, S. Population analysis of dental anomalies of otters Lutra lutra from eastern Germany. Acta Theriol. 47, 339–362 (2002).
Iurino, D. A., Fico, R., Petrucci, M. & Sardella, R. A pathological Late Pleistocene canid from San Sidero (Italy): implications for social-and feeding-behaviour. Naturwissenschaften 100, 235–243 (2013).
Iurino, D. A. & Sardella, R. Medical CT scanning and the study of hidden oral pathologies in fossil carnivores. PalZ. 89, 251–259 (2014).
Seo, H. et al. Regulation of root patterns in mammalian teeth. Sci. Rep. 7, 12714 (2017).
Siori, M. S. et al. New data on Early Pleistocene vertebrates from Monte Argentario (Central Italy). Paleoecological and biochronological implications. Geobios 47, 403–418 (2014).
Pazzaglia, F. et al. Pleistocene calcareous tufa from the Ellera basin (Umbria, central Italy) as a key for an integrated paleoenvironmental and tectonic reconstruction. Quat. Int. 292, 59–70 (2013).
Rook, L. Pannonictis nestii (Carnivora, Mammalia) from the late Villafranchian of Pietrafitta (Umbria, Italy). Preliminary note. Eclogae Geol. Helv. 88, 853–864 (1995).
Gentili, S. et al. Voles from the Early Pleistocene of Pietrafitta (Central Italy, Perugia). Acta Zool. Cracov. 39, 185–189 (1996).
Gentili., S., Ambrosetti, P. & Argenti, P. Large carnivore and other mammal fossils from the Early Pleistocene alluvial plain of the Tiberino Basin (Pantalla, Central Italy). Preliminary reports. Boll. Soc. Paleont. It. 36, 231–238 (1997).
Martinetto, E. et al. The plant record of the Dunarobba and Pietrafitta sites in the Plio-Pleistocene palaeoenvironmental context of central Italy. Alpine Med. Quatern. 27, 29–72 (2014).
Ambrosetti, P. et al. Corciano: materiali preistorici e paleontologici (Quattroemme, Perugia, 1994).
Petronio, C. et al. Updating Villafranchian molluscs and mammal faunas in Umbria and Latium (Central Italy). Geol. Romana 36, 369–387 (2002).
Spassov, N. Acinonyx pardinensis (Croizet et Jobert) remains from the Middle Villafranchian locality of Varshets (Bulgaria) and the Plio-Pleistocene history of the cheetahs in Eurasia. Estud. Geol. 67, 245–253 (2011).
Hemmer, H., Kahlke, R. D. & Vekua, A. K. The Old World puma - Puma pardoides (Owen, 1846) (Carnivora: Felidae) - in the Lower Villafranchian (Upper Pliocene) of Kvabebi (East Georgia, Transcaucasia) and its evolutionary and biogeographical significance. Neues Jahrb. Geol. Palaeontol. Abh. 233, 197–231 (2004).
Madurell-Malapeira, J., Alba, D. M., Moya-Sola, S. & Aurell-Garrido, J. The Iberian record of the puma-like cat Puma pardoides (Owen, 1846) (Carnivora, Felidae). C. R. Palevol. 9, 55–62 (2010).
Hemmer, H., Kahlke, R. D. & Keller, T. Cheetahs in the Middle Pleistocene ofEurope: Acinonyx pardinensis (sensu lato) intermedius (Thenius, 1954) from the Mosbach Sands (Wiesbaden, Hesse, Germany). Neues Jahrb. Geol. Paläontol. Abh. 249, 345–356 (2008).
Bellucci, L., Sardella, R. & Rook, L. Large mammal biochronology framework in Europe at Jaramillo: the Epivillafranchian as a formal biochron. Quat. Int. 389, 84–89 (2015).
Macdonald, D. W., Loveridge, A. J. & Nowell, K. Dramatis personae: an introduction to wild felids in Biology and Conservation of Wild Felids (eds Macdonald, D. W. & Loveridge, A. J.) 3–58 (Oxford, 2010).
Petrucci, M., Cipullo, A., Martínez-Navarro, B., Rook, L. & Sardella, R. The late Villafranchian (Early Pleistocene) carnivores (Carnivora, Mammalia) from Pirro Nord (Italy). Palaeontogr. Abt. A 298, 113–145 (2013).
O’Regan, H. J. A phylogenetic and palaeoecological review of the Pleistocene felid Panthera gombaszoegensis (PhD Dissertation, Liverpool John Moores University, 2002).
Cherin, M., Bertè, D. F., Sardella, R. & Rook, L. Canis etruscus (Canidae, Mammalia) and its role in the faunal assemblage from Pantalla (Perugia, central Italy): comparison with the Late Villafranchian large carnivore guild of Italy. Boll. Soc. Paleontol. It. 52, 11–18 (2013).
Palmqvist, P., Pérez-Claros, J. A., Janis, C. M. & Gröcke, D. R. Tracing the ecophysiology of ungulates and predator-prey relationships in an early Pleistocene large mammal community. Palaeogeogr. Palaeocl. 266, 95–111 (2008).
Decandia, F. A. & Lazzarotto, A. Le unità tettoniche del Monte Argentario (Toscana meridionale). Mem. Soc. Geol. It. 21, 385–393 (1980).
Martínez-Navarro, B., Sardella, R., Rook, L., Bellucci, L. & Ros-Montoya, S. First occurrence of Soergelia (Ovibovini, Bovidae, Mammalia) in the Early Pleistocene of Italy. Quat. Int. 267, 98–102 (2012).
Sardella, R., Petrucci, M. & Rook, L. The African species Megantereon whitei from the Early Pleistocene of Monte Argentario (South Tuscany, Central Italy). C. R. Palevol. 7, 601–606 (2008).
Iurino, D. A. & Sardella, R. CT scanning analysis of Megantereon whitei (Carnivora, Machairodontinae) from Monte Argentario (Early Pleistocene, central Italy): evidence of atavistic teeth. Naturwissenschaften 101, 1099–1106 (2014).
Mirone, A., Brun, E., Gouillart, E., Tafforeau, P. & Kieffer, J. The PyHST2 hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities. Nucl. Instrum. Meth. B 324, 41–48 (2014).
Lyckegaard, A., Johnson, G. & Tafforeau, P. Correction of ring artefacts in x-ray tomographic images. Int. J. Tomograph. Stat. 18, 1–9 (2011).
We gratefully thank all the people that helped us in analysing museum collections (institutional abbreviations are explained in Supplementary Note 2): M.C. De Angelis (SBAU), E. Cioppi (IGF), G. Csorba and M. Gasparik (HNHM), A. Lister and P. Brewer (NHM), R.D. Kahlke and G. Utschig (IQW), F. Masao and A. Songita (LCOG), P. Agnelli (MZUF), L. Costeur (NHMB). Thanks are also due to A. Profico for his precious suggestions and to M. Antón for allowing us the use of skeletal reconstructions. We are grateful to the late F. Baschieri, his wife G. Pratesi and R. Argano for having entrusted the specimen to R.S. We acknowledge the European Synchrotron Radiation Facility in Grenoble for providing SR-µCT facilities and assistance in using beamline ID17. This work has been supported by the ‘Fondo Ricerca di Base 2014’, Department of Physics and Geology, University of Perugia.
The authors declare no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Cherin, M., Iurino, D.A., Zanatta, M. et al. Synchrotron radiation reveals the identity of the large felid from Monte Argentario (Early Pleistocene, Italy). Sci Rep 8, 8338 (2018). https://doi.org/10.1038/s41598-018-26698-6
Scientific Reports (2020)