The tail club knob is a highly specialized structure thought to characterize a subgroup of the ankylosaurine ankylosaurians, and the oldest documented tail club knob in the fossil record occurred in the Campanian ankylosaurine Pinacosaurus. Here we report a new ankylosaurid Jinyunpelta sinensis, gen. et sp. nov., from the Albian–Cenomanian Liangtoutang Formation, Jinyun County, Zhejiang, China. This is the first definitive and the best preserved ankylosaurid dinosaur ever found in southern China. Jinyunpelta possesses unique cranial features differs from other ankylosaurs including two paranasal apertures level with and posterior to the external naris, a triangular fossa on the anterodorsal edge of the maxilla, an antorbital fossa in the junction between the maxilla, lacrimal and jugal, and an anterior process of the prearticular that lies ventral to the splenial. Our phylogenetic analysis suggests Jinyunpelta as the most basal ankylosaurine dinosaur. Jinyunpelta has a tail club with interlocking caudal vertebrae and a well-developed tail club knob, it represents the oldest and the most basal ankylosaurian known to have a well-developed tail club knob. The new discovery thus demonstrates that a large and highly modified tail club evolved at the base of the ankylosaurine ankylosaurs at least about 100 million years ago.
Ankylosaurian fossils were first discovered in Huzhen Town, Jinyun County, Zhejiang Province in the 1970s, but they have never been formally described1. Most of these fossils were subsequently lost, though others were recently transferred to Zhejiang Museum of Natural History (ZMNH). In June of 2008, Mr. Meiyun Li, a local farmer, found a new ankylosaurian fossil in a construction site in Huzhen, Jinyun. Subsequently, a joint team from the Zhejiang Museum of Natural History, Jinyun Museum and Fukui Prefectural Dinosaur Museum organized several excavations at this site, and others, in Huzhen Town between 2008 and 2014. The 2013 excavation was particularly successful, producing more than five ankylosaurian individuals, though all incomplete. Here we describe two specimens that were collected during the 2013 fieldwork, as the other specimens are still under preparation.
Geographical and Geological Settings
Huzhen Basin is located between Xianju and Yongkang basins in eastern Zhejiang, covering about 300 km2 in area. The Huzhen basin outcrops the Cretaceous Tiantai Group, which consists of the Tangshang, Liangtoutang, and Chichengshan formations in ascending order (Fig. 1). Although the Liangtoutang Formation (also called the Laijia Formation) has been widely accepted as early Late Cretaceous2, some recent radiometric dates suggest that the Liangtoutang Formation is late Early Cretaceous to early Late Cretaceous (Albian–Cenomanian). For example, Wang, et al.3 reported a radiometric date of 105.9–103.2 Ma (Albian) for the Liangtoutang Formation; He, et al.4 reported a SIMS zircon U–Pb date of about 99–96 Ma (Cenomanian) for the Liangtoutang (Laijia) Formation in Tiantai basin; Jiang, et al.5 reported a zircon U-Pb age of 100 ± 1 Ma (Albian–Cenomanian) for the Liangtoutang (Laijia) Formation in Tiantai. Taking into account all available radiometric dates and stratigraphic correlation, we place the Liangtoutang Formation in the mid-Cretaceous, Albian–Cenomanian (105.9–96 Ma).
Dinosauria Owen 1842
Ornithischia Seeley, 1888
Thyreophora Nopcsa, 1915
Eurypoda Sereno, 1986
Ankylosauria Osborn, 1923
Ankylosauridae Brown, 1908
Ankylosaurinae Brown, 1908
Jinyunpelta sinensis gen. et sp. nov.
Etymology: The generic name derives from ‘Jinyun’ (Mandarin) in reference to Jinyun County in which the type locality is located, and ‘pelta’ (Latin), a small shield, in reference to the osteoderms found on all ankylosaurians. The root of the specific name ‘sin’ (Greek) refers to China, the country of origin.
Holotype: ZMNH M8960, an almost complete skull, and a partial postcranial skeleton including some cervical, dorsal and sacral vertebrae, partial tail club knob, dorsal ribs, right scapula, partial right manus, left ilium, both ischia, left femur, osteoderms and numerous small postcranial ossicles.
Paratype: ZMNH M8963, A partial postcranial skeleton including an almost complete tail club, left tibia and fibula.
Locality: Lijin Industrial Park, Huzhen Town, Jinyun County, Zhejiang Province, China (Fig. 1).
Stratigraphic horizon: Liangtoutang Formation, later Early to early Late Cretaceous (Albian–Cenomanian).
Diagnosis: A derived ankylosaurid dinosaur differing from other ankylosaurid species in having the following combinations of features (autapomorphies indicated by *): two paranasal apertures C1 and C2 located posterior to the external naris and the center of the apertures on the same level with the center of the external naris*; a triangular fossa on anterodorsal edge of the maxilla*; two oval cavities on the dorsal of the nasal; the antorbital fossa present in the junction area of the maxilla, lacrimal and jugal; the prefrontal extending ventrally and contacts the maxilla; the postorbital excluded from the posterior rim of the orbit*; the anterior portion of the prearticular underlying the posterior portion of the splenial*; the dorsal centrum elongated with the ratio of length to the width more than 1.3; the tail club knob roughly hexagonal in dorsal view, with the widest point close to the distal end; and a prominent scar present mediodorsal to the medial condyle of the femur*.
Description and comparison
The ZMNH M8960 and ZMNH M8963 were discovered in the same quarry approximately two to three meters apart.
The skull and mandible of ZMNH M8960 are preserved together, with the dorsoposterior portion damaged, such that the squamosals and the posterior-most part of the frontals, postorbitals, parietals and occipital region are missing (Figs 2, 3, Table 1). The lateral sides of the snout taper anteriorly towards a squared-off premaxillary beak and there is a constriction anterior to the orbit in dorsal view. The twisted maxillary and dentary tooth row are strongly inset medially. Gular ossicles of the lower jaw obscure the palate.
The skull is longer than wide, unlike the wider skulls in derived ankylosaurids6. Some sutures of the dorsum posterior to the nasals are not fully fused. The sutural contacts of the skull are known from only a few taxa: Pinacosaurus grangeri from China and Mongolia, P. mephistocephalus, Liaoningosaurus and Chuanqilong from China, Kunbarrasaurus from Australia and Cedarpelta from the United States7,8. The dorsal surface of the skull has irregular, roughly textured skull ornamentation with some randomly directed non-vascular grooves, as in basal ankylosaurids such as Gobisaurus, Shamosaurus, Pinacosaurus and ‘Zhongyuansaurus’, rather than discrete caputegulae as in more derived ankylosaurids (Ankylosaurinae) like Ankylosaurus, Euoplocephalus or Saichania6. In lateral view, the skull bears a nearly flat dorsal surface posterior to the nares with only slight arching of the maxillary rostrum, as in ‘Zhongyuansaurus’9, and Kunbarrasaurus8. In contrast, Gobisaurus exhibits a domed dorsal surface10. The flatness of the skull may also partially result from taphonomic crushing.
The junction of the maxilla, lacrimal and jugal possesses a fossa, clearly present on both sides of the skull (Figs 2, 3). This probably represents a reduced antorbital fossa. A small antorbital fossa is similarly present between the maxilla and lacrimal in juvenile Pinacosaurus11, but an antorbital fenestra/fossa is absent in most ankylosaurians7.
The internarial bar, a medially positioned extension of the premaxilla that arcs posterodorsally, separates the external nares from one another (Fig. 2). The external naris angles anterolaterally to be visible in anterior view, unlike the anteriorly directed external naris in Crichtonpelta12. There are three paranasal apertures posterior to the external naris and are marked as opening B, C1 and C2 according to Hill, et al.13 (Fig. 3). Opening B sits between the premaxilla and maxilla, whereas the opening is fully located within the premaxilla in Pinacosaurus13,14. Opening B remains relatively small compared with that of Pinacosaurus13,14. Apertures C were considered to be the openings into a relatively large sinus system within the premaxilla13,14. The openings C1 and C2 sit posterior to the external naris, the center of the apertures is on the same level with the center of the external naris (Fig. 3). Although apertures C in Pinacosaurus are variable in number, the center is positioned much lower that external naris13,14. The intranasal process, partitioning of the external naris and paranasal aperture, directs dorsoposteriorly. The cranial ornamentation is not partitioned with amorphous texture. Prominent furrow ornamentations occur on the anterior surface of the nasal immediately posterodorsal to the external naris.
The subcircular orbits face anterolaterally (Figs 2, 3). Dorsoventral compaction during fossilization has shortened the dorsoventral diameter of the orbit. The orbits are visible in anterior view because of the anterior tapering of the skull as in Ankylosaurus15 and Crichtonpelta12,16. The orbital edge is everted, as in Saichania, Tarchia14, and Crichtonpelta16.
The premaxillae form a broad, sub-quadrate, edentulous beak, and bound the paranasal apertures and the external naris ventrally (Fig. 2). The beak is also broad in ankylosaurines such as Ankylosaurus15, Pinacosaurus13,18 and Euoplocephalus19. In contrast, the beak is much narrower in Shamosaurus20, Gobisaurus10, and Crichtonpelta16. The tomial crest formed by premaxillae is variably scalloped, and its outer borders curve downward, forming a sharp cutting edge.
The middle joint of the contralateral premaxillae is unfused and the suture is clearly visible in anterior view. A deep inverted V-shape premaxillary notch incises the interpremaxillary suture at its most anteroventral point, as in other ankylosaurids7. There are fused osteoderms on the dorsal surface of premaxilla. However, osteoderms are absent on the premaxilla in most ankylosaurids, such as Pinacosaurus13,18 and Euoplocephalus19.
In palatal view, the interpremaxillary suture is also clearly visible. The premaxillary palate is deeply concave, sub-quadrate, wider than long, parallel-sided, and only slightly rounded at its anterior edge. A posterodorsally inclined parasagittal incisive foramen sits directly posterior to the premaxillary notch along the palatal surface of each premaxilla. The posterior portion of the premaxilla is obscured by the lower jaws. Dorsolaterally, the sutural contact with adjacent nasals is obscured. The premaxilla-maxilla suture inclines backwards, unlike the vertically oriented ventral portion of premaxilla-maxilla suture in Pinacosaurus14.
In lateral view, the maxilla has a low triangular outline (Fig. 3). Anterodorsally, the maxilla contacts the premaxilla and nasal by a straight suture. The contact with the premaxilla is restricted to anterodorsal edge of the anterior tip of the maxilla, whereas most of the anterodorsal edge is in contact with the nasal. A fossa (Fig. 3b,d: mf) occurs immediately posteroventral to the middle of the anterodorsal edge. The fossa, present on both maxillae, is triangular with the anteroventral edge paralleling the posterodorsal edge of the maxilla. Anteriorly the maxilla contributes to the posterior margin of the paranasal opening B, which is formed by the maxilla, premaxilla and nasal.
The maxilla contacts the prefrontal, lacrimal and jugal posterodorsally. The maxilla has a posterodorsal process meeting the prefrontal. The contact between the maxilla and the lacrimal is long. The most ventral portion of the posterodorsal edge of the maxilla represents the jugal contact.
The roughened lateral surface of the maxilla bears scattered foramina. A co-ossified osteoderm laterally overlays the maxillary portion of the tomial crest, similar to Pinacosaurus11, but unlike adult specimens of Euoplocephalus11,19. The lateral surface is flat, unlike the convex surface in Crichtonpelta16.
The tooth row is inset medially from the lateral side of the maxilla as is typical for ankylosaurs11, but remains invisible in lateral view in this specimen due to the dorsoventral compression.
The anterior half of the nasals appear highly sculptured and rugose and sculpturing obscures the median sagittal suture between the nasals. The ornamentation is irregular, similar to Gobisaurus10, Shamosaurus20, and Crichtonpelta16. The nasal extends far backward along the skull roof. Posteriorly, the nasal contacts the frontal in line with the midpoint of the orbit. The serrated suture with the frontal curves anteromedially, unlike the roughly transversely oriented suture in Pinacosaurus14, and Kunbarrasaurus8. The nasal contacts the prefrontal posterolaterally, and the long contact is oriented lateroanteriorly, and passes from the dorsal to the lateral side of the skull. The nasal is widest at the anterolateral end of the suture, and becomes narrower toward both anterior and posterior ends, producing a hexagon shape in dorsal view. Dorsally, the nasal bears two oval cavities, symmetrical with each other sagittally. The nasal contributes to a large portion of the preorbital region forming the lateral wall of the skull. Ventrally, the nasal contacts the anterodorsal edge of the maxilla, similar to Minmi21. The contact between the nasal and the maxilla is relatively shorter in Pinacosaurus14. The nasal lacks a contact with the lacrimal, unlike in Pinacosaurus14.
The prefrontal sits posterolateral to the nasal, anterolateral to the frontal, anteromedial to the supraorbital, and dorsal to the lacrimal. In dorsal view, the prefrontal is oval-shaped, orienting anterolaterally with respect to the sagittal plane. The relatively large prefrontal contributes to the dorsal and lateral walls of the skull. Posteromedially its contact with the frontal is short and its contribution to the lateral wall of the skull is insignificant, with a small rectangular lateral exposure at the rostral region of the orbit as in Pinacosaurus14. The prefrontal contacts the maxilla anteroventrally. In contrast, the lacrimal separates the prefrontal from the maxilla in Pinacosaurus11,14. The prefrontal of Kunbarrasaurus seems to contact the dorsally strongly expanded maxilla8.
In lateral view, the lacrimal is triangular and tapers anteriorly and forms the anterior margin of the orbit (Fig. 3). Anteroventrally, the lacrimal contacts the maxilla along a suture that directs obliquely upward. Dorsally the lacrimal contacts the prefrontal and supraorbital; and posteroventrally the lacrimal contacts the jugal below the orbit. The lacrimal is rectangular in juvenile Pinacosaurus22.
Two supraorbitals are evidently incorporated into the skull roof, but their contacts with neighboring bones are not fully discernible. They form the upper orbital margin and protrude laterally over the orbit as wedge-like bosses. They form a blunt horn near the lateroposterior end of the skull. The horn is prominent in lateral view but inconspicuous in dorsal view. They are rounded and blunt as in Gobisaurus10, and Shamosaurus6,20. In dorsal view, the two supraorbital caputegulae form a continuous lateral edge as in Ankylosaurus, Anodontosaurus, Euoplocephalus, Dyoplosaurus, and Scolosaurus. In contrast, the supraorbital caputegulae have distinct peaks in Pinacosaurus14, Tarchia, Ziapelta23, and Zuul22. The supraorbital horn is well separated from the squamosal horn as in Crichtonpelta16, Anodontosaurus, Euoplocephalus, and Scolosaurus, however the supraorbital horn is continuous with the squamosal horn in Ankylosaurus24.
The elongate anterior supraorbital seems to contribute more to the lateral margin of the orbit than the posterior supraorbital. The posterior supraorbital is triangular and larger than the anterior supraorbital. The former is located medially to the latter. The anterior supraorbital contacts the lacrimal and the prefrontal. The posterior one contacts the prefrontal, the frontal and the postorbital. Besides the anterior and posterior supraorbitals, a third supraorbital is present in juvenile Pinacosaurus13, and many small pyramidal caputegulae in Zuul22.
The postorbital forms part of the posterolateral corner of the skull, posterior to the posterior supraorbital. The horizontal wing is incorporated into the skull roof and contacts the supraorbital and frontal anteriorly. The vertical wing of the postorbital is excluded from the posterior part of the orbit, but contacts the jugal ventrally. In contrast, the vertical wing of the postorbital forms the posterior part of the orbit in Pinacosaurus14 and Kunbarrasaurus8.
The jugal forms the ventral border of the orbit, and the suborbital arch is shallow as other ankylosaurs19,25. Ventrally the jugal displays a short, tapering continuance of the buccal emargination. The jugal articulates with the lacrimal anteriorly, the maxilla anteroventrally, the postorbital posterodorsally, and the quadratojugal posteriorly. The tapering anterior end of the jugal inserts between the posterior ends of the maxilla and lacrimal.
Only the anterolateral portion of the right frontal is preserved and an osteoderm partially covers the naso-frontal suture. The frontal contacts the prefrontal anterolaterally, the supraorbital laterally, and the postorbital posterolaterally. The sutures are serrated, except the medial suture with the nasal.
Only the base portion of the right quadratojugal horn is preserved. The quadratojugal projection extends lateroventrally and bears shallow, irregular furrows on the external surface of the horn.
The associated mandible lacks an external mandibular fenestra. Additionally, there is not a well-developed mandibular caputegulum, but its ventral surface is sculptured as in juvenile Pinacosaurus. This indicates the ornamentation probably represents sculpturing and outgrowth of the bones themselves, rather than being produced by osteoderms, as suggested by Arbour and Evans22.
The predentary is transversely wide and crescentic in ventral view. The predentary conjoins the paired dentaries anterior to the mandibular symphysis, forming an edentulous tomium. A short, ventrally projecting sagittal protuberance of the predentary contacts the mandibular symphysis. Externally the anteroventral surface is rugose and perforated by a variety of foramina.
Gular ossicles obscure the tooth row. Anteriorly, the dentaries flex medially and articulate with one another at the dorsoventrally abbreviated mandibular symphysis. Dorsal to the symphysis, the dentaries articulate with the predentary. In lateral view, the dentary articulates with the surangular posteriorly, the angular posteroventrally, and the predentary anteriorly. In lingual view, the dentary is mostly overlain by the splenial.
The splenial forms the ventromedial surface of the mandible. Posteriorly, the splenial contacts the prearticular, with its posterior end underlain by the prearticular. In contrast, the splenial underlies the anteroventral margin of the prearticular in Euoplocephalus19, Tarchia (Observation based on AMNH 31765, the cast of the ‘Minotaurasaurus ramachandrani’ holotype INBR21004)17,26 and Zuul22.
The angular forms the ventrolateral margin of the mandible, and as in most ankylosaurs, its lateral surface is invariably embellished with a rugose ornamentation. The angular articulates with the dentary anterodorsally, and the surangular dorsally. The ventral surface of the angular is sculptured but lacks the prominent ornamentation that occurs in subadult Pinacosaurus individuals7,13. The anterior process is short and similar to Pinacosaurus14, in contrast, the angular is elongate in Euoplocephalus19. The angular is not visible in medial view like in Edmontonia, in contrast with Euoplocephalus19.
The surangular is situated in the dorsoposterior quarter of the mandible where it articulates with the dentary anteriorly and angular ventrally. There are some small ossicles preserved on the lateral surface of the surangular.
The prearticular articulates with the splenial anterodorsally and the articular dorsally.
The articular overlies the splenial and the prearticular in the medial view.
Two rodlike ceratobranchial bones are preserved within the skull, but are mostly covered by gular ossicles. The hyoid bones display longitudinal striae.
Numerous osteoderms from 5 to 15 millimeter in diameter (gular ossicle) are preserved on the ventral side of the skull (Fig. 2). Their preservation is very similar to that in the holotype of Panoplosaurus (CMN 2759)27. Gular ossicles are also known in Edmontonia (AMNH 5381)28 and Zuul22. The ossicles near the mandible are arranged parallel with the mandible, while the remainder of the osteoderms have a random arrangement. The ossicles in the central area are relatively larger and the anterolateral and posterior ossicles are relatively small. This arrangement pattern is similar to Panoplosaurus (CMN 2759)27.
The laterally compressed axial centrum has a concave posterior articulation surface, and is anteroposteriorly longer than the cervical centra in ZMNH M8960. The axis bears a robust neural arch with a short neural spine and a wide and massive dens. The neural spine slopes dorsoposteriorly and the dorsal edge is convex dorsally. The postzygapophyses are located on the posterolateral ends of neural spine, and exceed the posterior end of the centrum. They are almost parallel with each other in dorsal view and are directed ventroposteriorly in lateral view. The neural canal is deep and laterally compressed with an oval outline.
One postaxial cervical vertebra is well preserved in ZMNH M8960. The cervical centrum is wider than long, with subcircular amphicoelous articular faces. The pre- and postzygapophysis are elongate, extending slightly beyond the articular surfaces of the centrum. There is no epipophysis. The neural canal is wider than high, the dorsal and ventral edges are straight and the lateral edges are round. The transverse process (diapophysis) is located anteroposteriorly centrally and relatively low on the neural arch. The process projects ventrolaterally about 45° from the horizontal. In contrast, the transverse processes are horizontally oriented in Crichtonpelta12, and Ankylosaurus15, and the Mongolian ankylosaurid IGM 100/1305 (cf. Pinacosaurus)29,30. The neural canal is large, wider than high, similar to that in Crichtonpelta12. The parapophysis is a subcircular protuberance, located more anteriorly relatively to the transverse process on the centrum. The centrum is a trapezoid in lateral view with the ventral edge slightly longer than the dorsal edge.
ZMNH M8960 (Fig. 4m–r) preserves one incomplete dorsal vertebra. The spool-shaped centrum has concave lateral and ventral sides and sub-circular articular faces. The articular faces are also concave in Ankylosaurus15, but almost flat in Crichtonpelta12, and Saichania14. Ventral to the diapophysis the centrum is laterally compressed. The length of the centrum is greater than the transverse width of the articular surfaces as in Struthiosaurus31. The converse is true in other ankylosaurs7, such as Crichtonpelta12. However, the centrum is more elongate than that in Struthiosaurus with a length/width ratio of approximate 1.3, greater than that of any other ankylosaurians. The neural arch is located in the anterior half of the centrum. The neural canal is relatively small compared to that in the cervicals. The canal is ovoid in cross-section, with the long axis directed vertically. The mediolaterally thin and anteroposteriorly elongate base of the neural spine extends to the posterior end of the neural arch. The plate-like transverse process is directed upward in anterior view and anterolaterally in dorsal view, the process is directed relatively lower than that in Crichtonpelta12. The diapophysis is an inverted triangle on the end of the transverse process. The parapophysis is larger than the diapophysis, sits below the transverse process has a triangular-shaped articular surface. The prezygapophyses meet ventrally form a U-shaped trough as other ankylosaurs32. The postzygapophyses are fused together along their lengths to form a peg-like, midline structure.
Three firmly fused sacral vertebrae are preserved together with the ilium (Fig. 5). The sacral centra are broad and dorsoventrally depressed. The neural canal is well developed. Transverse processes are firmly fused with the horizontally oriented sacral ribs. The compound structure formed by the transverse processes and the sacral rib is dorsoventrally deep with an hourglass-shaped cross-section.
Although no anterior free caudal vertebrae are preserved, the holotype includes a partial tail club knob. The paratype ZMNH M8963 includes an almost completely preserved tail club (Fig. 6, Table 3). As in other ankylosaurines, the posterior-most ten caudal vertebrae form the handle of the tail club. These vertebrae are highly modified and interlock tightly with each other to form a rigid structure22. These caudal vertebrae have intermediate morphology between V- and U-shaped neural spines in which the prezygapophyses diverge at an angle of approximate 14–25°. Bundles of long and parallel arranged ossified tendons are closely appressed to the lateral sides of the centra of the tail club handle (Fig. 6: ot). The tips of the ossified tendons are tapered and flattened. The chevrons are dorsoventrally short but anteroposteriorly long. They are bifurcated anteriorly, but tapers to a point posteriorly, tightly interlocking with each other along the ventral side of the vertebrae.
As in other ankylosaurines, knob osteoderms completely envelop and obscure the distalmost vertebrae6. The tail club knob is composed of two large lateral osteoderms, and three small medial osteoderms with one centrally located. The knob is dorsoventrally flattened rather than hemispherical. Overall, the knob has a roughly hexagonal outline in dorsal view, with the widest point close to the distal end. The knob is anteroposteriorly longer than transversely wide (45.5 cm in length and 43.1 cm in width, the width/length ratio of the tail club knob is approximately 0.95), unlike the transversely wider knobs in Anodontosaurus. The knob is wider than that in Dyoplosaurus (ROM 784) with width/height ratio 0.6832.
There are six osteoderms present in the ventral surface of the tail club handle (Fig. 6: os). The anterior four are incomplete, whereas the posterior two are almost complete, and wider than long with a sub-rectangular outline. Their surface pattern is similar to that of tail club knob. The ventral osteoderms are also present in Mongolian ankylosaurine and PIN 614 (cf. Pinacosaurus)22.
The massive dorsal ribs have well-decurved shafts relative to the rib head. As in most ankylosaurs, the dorsal surface is wide, flattened, and supported below by the deep ventral portion of the ribs, giving the rib a T-shaped cross-section proximally. Distally, this morphology becomes less distinct and eventually diminishes to an ovoid.
The left scapula is preserved with both ends broken (Fig. 7a–d, Table 4). Both anterior and posterior ends are expanded, producing concave dorsal and ventral margins of the scapular blade in lateral view. The posterior expansion is stronger than in Crichtonpelta12. The incomplete acromion curves dorsolaterally. The narrowest region of the scapular blade is immediately posterior to the glenoid fossa. The dorsal margin of the scapular blade is slightly convex as in other ankylosaurs, such as Sauropelta, Euoplocephalus7, and Chuanqilong33. In lateral view, the anteroventral projection is very strong. There is a prominent enthesis on the ventral edge just posterior to the projection, which probably marks the insertion of the M. triceps longus caudalis, as in Crichtonpelta12, Ankylosaurus15 and Euoplocephalus32. On the medial side, the scapulocoracoid buttress is well-developed at the anterior end of the scapula.
The right humerus is preserved with its distal end missing (Fig. 7e,f, Table 4). The massively built humerus bears a deltopectoral crest strongly expanded in anterior or posterior view. The surface of the deltopectoral crest has prominent striations, which may represent the attachments for the M. supracoracoideus and M. pectoralis32. The medial (internal) tuberosity is prominent. Anteriorly, the deltopectoral crest and humeral head bound a broad shallow fossa (bicipital fossa) with an inverted triangular outline.
The manus is pentadactyl as in Pinacosaurus, Sauropelta, and Shamosaurus7. All metacarpals are robust and expanded at the proximal and distal ends. Metacarpals become shorter and less massive moving from I to V (Fig. 7g, Table 5).
The left ilium is preserved, with its dorsal portion obscured by the small osteoderms (ossicles) (Fig. 5a–b). The majority of the iliac blade is rotated horizontally. The preacetabular process is long, relatively straight, depressed dorsoventrally, and diverges anterolaterally from the sacrum. The dorsal surface of the preacetabular process directs dorsolaterally, which is almost directs laterally in Crichtonpelta12. A raised anterolaterally oriented ridge lies along the ventral surface of the preacetabular process, which is almost straight, however the ridge is well-curved in Crichtonpelta12. The acetabulum is imperforate, shallow and cuplike as in all ankylosaurians7.
A large number of small osteoderms (ossicles) are preserved together with the ilium. Most are small ossicles range from 0.5 to 2.5 cm in diameter similar to those on the ventral side of the skull. The ossicles may have occupied the space between the larger plates on the dorsal surface15.
Three large triangular plate osteoderms are preserved dorsal and lateral to the ilium (Fig. 6a: os). The large dorsal osteoderm is level with the small ossicles.
Both ischia are preserved, but neither is complete (Fig. 8a–h, Table 6). The body of the ischium forms a laterally compressed shaft that abruptly terminates without a distal expansion. The ischium is wide proximally, and a sulcus on the lateral side contributes to the closed acetabulum. The ischial shaft is slightly sigmoidal in both lateral and medial views. The distal portion is curved posteriorly. The wide proximal end tapers abruptly into the ischial shaft, with the narrowest region of the shaft occurring proximally. The ischial shaft widens toward the distal end, prior to tapering again further distally, as in Chuanqilong33.
The right femur is preserved with both ends broken (Fig. 8i–l, Table 6). The femoral shaft is straight, massive and anteroposteriorly compressed. The proximal and distal ends are transversely expanded relative to the shaft, which has its narrowest width just proximal to the fourth trochanter. The ridge-like fourth trochanter sits on the medial margin of the femur. The trochanter is more prominent than that in Crichtonpelta12. On the distolateral surface of the shaft bears a scar for the M. gastrocnemius, which is less prominent than that in Ankylosaurus15, and Dongyangopelta34. This scar is absent in Crichtonpelta12. Mediodorsal to the medial condyle, there is a prominent scar, which is not seen in other ankylosaurians. Distally, both the medial and lateral condyles are posteriorly expanded, with the medial more prominent.
The tibia and fibula are preserved in articulation (Fig. 8m–p, Table 6). The tibia is stout and straight. The proximal and distal ends are broadly expanded anteroposteriorly and mediolaterally, respectively, creating a twisted tibial shaft.
The fibula is slender relative to the tibia (Fig. 8m–p, Table 6). It has a laterally compressed and straight shaft with rugose proximal and distal ends. The well-defined distal end indicates that the calcaneum was not fused with it.
The systematic position of Jinyunpelta sinensis within Ankylosauridae was quantitatively evaluated by analyzing a recently published comprehensive dataset for the ankylosaurid phylogeny by Arbour, et al.35 with Jinyunpelta and Zuul22 added in. The scores for Crichtonpelta are revised according to Yang, et al.16, except the character 4 followed Arbour, et al.35. The revised dataset includes 59 taxa and 177 characters, and the character matrix was assembled in Mesquite version 3.2. The analysis was carried out using a traditional search with the tree bisection reconnection algorithm in TNT version 1.5. All characters were treated as unordered and of equal weight. The maximum trees in memory was set to 100000, 1000 replicates were used with 10 trees saved per replication. The analysis resulted in 100000 parsimonious trees (tree length = 566 steps, CI = 0.399, and RI = 0.667). The strict consensus tree of these 100000 MPTs lacks resolution, with nearly the whole of Ankylosauria in an unresolved polytomy (see Supplementary Fig. S1). The 50% majority rule consensus tree of 100,000 MPTs recovers the traditional ankylosaurid-nodosaurid dichotomy. Jinyunpelta is placed as the most basal ankylosaurine in 74% of the trees (see Supplementary Fig. S1).
A reduced consensus tree was calculated a posteriori which excluded four wildcard taxa (Aletopelta, Paw Paw scuteling, Sauroplites, and ‘Zhejiangosaurus’), and this shows considerably greater resolution (Fig. 9). Jinyunpelta is recovered as the most basal ankylosaurine in the derivative strict reduced consensus tree.
Jinyunpelta sinensis is identified as an ankylosaurid based on the following ankylosaurid synapomorphies: two pairs of osteodermal horns projecting from the quadratojugals and squamosals; paranasal apertures present; absence of premaxillary teeth; rugose cranial ornamentation; a well-developed tail club, with prezygapophyses and neural spines overlapping more than half the length of the adjacent vertebra, and ossified tendons in the distal part of the tail. Jinyunpelta sinensis also possesses several synapomorphies of Ankylosaurinae6: supraorbitals form a sharp, continuous edge above orbit; haemal arches fused to their respective centra; well-developed tail club knob. The overall arrangement of the cranial bones and general shape of the skull of Jinyunpelta sinensis is similar to that in the other basal ankylosaurids such as Gobisaurus, Shamosaurus, Crichtonpelta, and Pinacosaurus: the skull is longer than wide; the dorsal cranial ornamentation is not divided into discrete caputegulae but is instead rugose and irregular, while discrete caputegulae are present in more derived ankylosaurids like Ankylosaurus, Euoplocephalus or Saichania6. However, the premaxillary beak is relatively wider than that in Gobisaurus, Shamosaurus, and Crichtonpelta.
The tail club is one of the most recognizable features of derived ankylosaurids32. Arbour and Currie36 investigated the evolution of the tail club, and suggest the tail club evolved in a stepwise fashion with handle-like vertebrae preceding the distal enlarged knob. The oldest and most basal ankylosaurian known to possess the tail club knob was Pinacosaurus from the Campanian36. Talarurus was the oldest ankylosaurid (Cenomanian–Turonian) with a tail club but more derived than Pinacosaurus36, however, not tail club knob is preserved in Talarurus37. The tail club handle and knob are very well developed in Jinyunpelta. Given the uncertainty of the tail club in Crichtonpelta12,16,36, Jinyunpelta represents the oldest and the most basal ankylosaurian known to have possessed a tail club knob (Fig. 10). The tail club knob of Jinyunpelta is approximately 45.5 cm in transverse diameter, comparable with the size of the tail club from Scollard Formation (AMNH 5214, ~45 cm wide), the youngest unit preserving a tail club knob36. However, it is much larger than the tail club knob (MPC 100/1305, 14.6 cm wide) in the Djadokhta Formation, previously the oldest formation preserving tail club knobs22,36, though smaller than the largest knob from the younger formations than Djadokhta Formation (Nemegt, Dinosaur Park, and Horseshoe Canyon formations) (ZPAL MgD I/43, 62 cm wide, ROM 788, 57.2 cm wide, AMNH 5245, 59.3 cm wide22,36. The largest knob is approximately 44% wider than that of Jinyunpelta,). The relatively large size of the tail club knob of Jinyunpelta suggests that the large knob appeared early in ankylosaurid evolution and the size evolution of tail club is more than a simple trend of size-increase. Up to now, only Jinyunpelta from mid-Cretaceous possesses a well-developed tail club knob had been found, and other ankylosaur specimens with tail club knob are from Campanian or Maastrichtian. More materials from early development of the tail club knob are needed to understand the early evolution and trend of the tail club knob.
Ankylosaurian dinosaur remains are abundant in Asia, but most specimens were discovered in Mongolia or northern China. All ankylosaurians discovered from Mongolia are referable to Ankylosauridae, and except Shamosaurus, all belong to Ankylosaurinae6,17. Most ankylosaurs of China were discovered from northern China and belong to ankylosaurids, such as Liaoningosaurus, Chuanqilong and Crichtonpelta from Liaoning12,16,33,38, Gobisaurus from Nei Mongol and Henan6,9,10, Pinacosaurus from Nei Mongol and Shandong39,40,41, and Saichania from Shanxi6,42,43. Jinyunpelta therefore represents the southernmost occurrence of definitive ankylosaurid remains from Asia.
Two ankylosaurians, ‘Zhejiangosaurus’44 and Dongyangopelta34, had been reported from Zhejiang Province. Dongyangopelta was recovered as Nodosauridae6,34. Althought ‘Zhejiangosaurus’ was recovered as Nodosauridae45, it was recovered as Ankylosauridae later and treated as nomen dubium in latest phylogenetic analysis6. Jinyunpelta therefore represents the first definitive and diagnosable ankylosaurid dinosaur and first ankylosaurine dinosaur from Zhejiang Province. The new discovery suggests that both nodosaurid and ankylosaurid dinosaurs inhabited Zhejiang Province and presents an important addition to the known diversity and palaeogeographical distribution of ankylosaurians in Asia.
The high-resolution photos of the skull are available in the figshare repository, https://doi.org/10.6084/m9.figshare.5895958.
Jinyunpelta sinensis, gen. et sp. nov. is a new basal ankylosaurine dinosaur based on two specimens with an almost complete skull, an almost complete tail club, and postcranial remains. Jinyunpelta represents the oldest and the most basal ankylosaurian known to have a well-developed tail club knob. It demonstrates that a large and highly modified tail club knob evolved at the base of the ankylosaurine at least about 100 million years ago. Jinyunpelta represents the first definitive ankylosaurid dinosaur from southern China, and expands the known diversity and palaeogeographical distribution of ankylosaurians in Asia.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This work was supported by grants from the Chinese Natural Science Foundation (41602019, 41688103, and 91514302), State Key Laboratory of Palaeobiology and Stratigraphy (Nanjing Institute of Geology and Palaeontology, CAS) (No. 163120), and the Jurassic Foundation. We thank the following people for participating the fieldwork in 2013: S. Gu (ZMNH), C. Chen (Jinyun Museum) and T. Kubo (Fukui Prefectural Dinosaur Museum) and several local farmers. We thank C. Yu and Y. Sheng (ZMNH) for preparing the specimens. We thank the following people for access to and assistance at their respective institutions: F. Zheng and B. Geng (Institute of Vertebrate Paleontology and Paleoanthropology, Beijing), M. Norell and C. Mehling (American Museum of Natural History), X. Wu, M. Currie and K. Shepherd (Canadian Museum of Nature), D. Evans, K. Seymour and V. Arbour (Royal Ontario Museum), and D. Brinkman and B. Strilisky (Royal Tyrrell Museum of Palaeontology). We thank D. Varricchio and J. Hogan (Montana State University) for constructive comments on the manuscript. F. Han (China University of Geosciences, Wuhan) aided with the use of TNT software. We thank reviewers Victoria Arbour and Robert Hill for their constructive suggestions. Free online versions of TNT and Mesquite were provided by the Willi Hennig Society and the Free Software Foundation Inc.