Histone lysine methyltransferases (KMTs) represent an important class of epigenetic enzymes that play essential roles in regulation of gene expression in humans. Members of the KMT family catalyze the transfer of the methyl group from S-adenosylmethionine (SAM) to lysine residues in histone tails and core histones. Here we report combined MALDI-TOF MS experiments, NMR analyses and quantum mechanical/molecular dynamics studies on human KMT-catalyzed methylation of the most related shorter and longer lysine analogues, namely ornithine and homolysine, in model histone peptides. Our experimental work demonstrates that while lysine is an excellent natural substrate for KMTs, ornithine and homolysine are not. This study reveals that ornithine does not undergo KMT-catalyzed methylation reactions, whereas homolysine can be methylated by representative examples of human KMTs. The results demonstrate that the specificity of KMTs is highly sensitive to the side chain length of the residue to be methylated. The origin for the degree of the observed activities of KMTs on ornithine and homolysine is discussed.
The epigenetics regulation of gene expression is mediated by DNA modification or by numerous posttranslational modifications of the associated histone proteins1,2. Among these, histone lysine methylation has been shown to be directly linked with the active or suppressed regions of the human genome, depending on the type of histone, the lysine site and the lysine methylation state3,4,5. In humans, histone lysine methylation is catalyzed by a large family of histone lysine methyltransferases (KMTs), using S-adenosylmethionine (SAM) as a cosubstrate6. All human KMTs, along with members of the related histone arginine methyltransferases, contain the 130 amino acid-sequence of SET domain7,8,9,10,11,12,13. DOT1L, the H3K79 methyltransferase, is the only example of KMTs that does not contain the canonical SET domain.
Recent mechanistic and structural studies on KMTs have provided the detailed information for the transfer of the methyl group from SAM to the nucleophilic Nε of lysine via the SN2 reaction, leading to a methylated lysine product and S-adenosylhomocysteine (SAH) (Fig. 1)7,8,9,10,11,12,13. The histone substrate and the SAM cosubstrate bind to two distinct sites of KMTs that join at the catalytic site of the SET domain (Fig. 1)7,8,9,10,11,12,13. The lysine residue that undergoes the methylation reaction is anchored in a narrow apolar channel. Previous structural, mutagenesis and enzyme kinetics studies, along with quantum mechanical/molecular mechanical simulations, highlighted that the composition of the active site of KMT directly affects the final methylation state of the methylated lysine products7,8,10,11,12,13,14,15. Several studies have clearly demonstrated that the presence of the conserved active site tyrosine (e.g. Y335 in SETD7, Y1154 in G9a) plays the vital role in the enzymatic activity11. The exact role for this tyrosine is still not clear, although it was proposed that it might act as a general base for deprotonation of the positively charged ammonium (and methylammonium) group for the methylation reaction to occur. The presence of additional tyrosine and phenylalanine residues in the active site of KMTs seems to control whether the enzymes catalyze mono-, di- or trimethylation of lysine. These tyrosine residues (e.g. Y245 in SETD7, Y1067 in G9a) form H-bonds with the target lysine in the X-ray structures, and thus may contribute to the proper alignment of the lone pair of the Nε with the electrophilic transferable methyl group of SAM.
Although a large body of biochemical data has provided clear evidence that lysine is the target residue in natural substrates for numerous KMTs, a key question that has not been investigated is whether this biologically important family of enzymes could also have a potential to methylate some simplest lysine analogues with different lengths of the side chain. Herein we report experimental and computational analyses of KMT-catalyzed methylation of natural lysine substrate, along with shorter ornithine and longer homolysine analogues (Fig. 2). Our comparative work highlights that lysine exhibits the perfect length of the side chain for SAM-mediated methyl transfer reactions.
Selection of histone lysine methyltransferases and histone peptides
We selected four human histone lysine methyltransferases for the study that examines the effect of changing the side chain length (i.e., from lysine to its analogues) on the efficiency of the KMT catalysis. The KMTs that were selected include: (i) SETD7 that catalyzes monomethylation of H3K416; (ii) G9a that catalyzes mono-, di- and trimethylation of H3K917; (iii) GLP that catalyzes mono-, di- and trimethylation of H3K917,18; and (iv) SETD8 that catalyzes monomethylation of H4K2019. These members of KMT family have been structurally and functionally characterized, and all have been recognized as validated targets for epigenetic drug discovery20,21. Therefore, we envisioned that the studies on these representative members of KMT family would advance our fundamental understanding of their enzymatic function, and consequently shed light on their inhibition.
Histone peptides that contain lysine, ornithine and homolysine were synthesized using the established solid-phase peptide synthesis protocol. The following histone peptides were synthesized: i) H3K4, H3Orn4 and H3hK4 (residues 1–15) for SETD7 catalysis; ii) H3K9, H3Orn9 and H3hK9 (residues 1–15) and H3K9 (residues 1–14) for G9a/GLP catalysis; and iii) H4K20, H4Orn20 and H4hK20 (residues 13–27) for SETD8 catalysis. We also incorporated shorter Dap and Dab at position 4 of H3 for the evaluation by SETD7. In addition, we synthesized p53 peptides (residues 365–379) that possess K373/Orn373/hK373 for the evaluation by G9a and GLP, and K372/Orn372/hK372 for the evaluation by SETD7. All histone and p53 peptides were obtained in pure form by preparative HPLC (Supplementary Figures S1–S16).
MALDI-TOF MS assays for KMT-catalyzed methylation
We examined histone peptides that possess natural lysine and unnatural lysine analogues as substrates for histone lysine methyltransferases employing MALDI-TOF MS, a well-established technique that enables studies of various posttranslational modifications of proteins/peptides, including those involved in epigenetic processes. First, we verified that all recombinantly expressed wild-type enzymes efficiently catalyze methylation of lysine (Fig. 3, top panels). Human SETD7 was observed to catalyze almost complete (>90%) SAM-dependent monomethylation of H3K4 to afford H3K4me (Fig. 3A, top panel). Similarly, H4K20 (100 μM) underwent virtually quantitative monomethylation in the presence of human SETD8 (2 μM) and SAM (200 μM) in Tris-buffer (50 mM, pH 8.0) after 1 hour at 37 °C (Fig. 3B, top panel).
Recent reports showed some conflicting data that G9a and GLP could catalyze mono- and dimethylation of H3K9 or trimethylation of H3K917. Our MALDI-TOF MS analyses revealed that both G9a (2 μM) and GLP (2 μM) catalyze quantitative trimethylation of H3K9 (100 μM) in the presence of SAM (500 μM) after 1 hour incubation at 37 °C, as exemplified by the mass shift of +42 Da (Fig. 3C and D, top panels). Control experiments in the absence of KMTs showed that no methylation of histone peptides was observed after 1 hour at 37 °C, confirming that methylation reactions are KMT-dependent (Supplementary Figures S17–S20).
We initially screened the entire panel of lysine analogues that bear shorter and longer side chains, i.e. Dap, Dab, Orn, hLys, as potential substrates for SETD7 (Figs 2 and Supplementary Figure S21). None of these lysine analogues were observed to be methylated in the presence of SETD7 (2 μM) and SAM (200 μM) under standard reaction conditions (1 hour at 37 °C) that efficiently yielded H3K4me (see above); only starting histone peptides were observed in MALDI-TOF spectra. We were particularly surprised that no monomethylated products were detected with Orn and hLys, because their side chain lengths are the most similar (though still significantly different) to the one of the natural lysine (Fig. 3A, middle and bottom panels). In line with Orn and hLys, shortening the Lys side chain by two methylenes (Dab) or three methylenes (Dap) results in no methylation too (Supplementary Figure S21). Increased amounts of SETD7 (10 μM), SAM (1 mM) and longer incubation time (6 hours) also did not yield any methylated ornithine and homolysine (Supplementary Figures S22–S23), implying that SETD7 is extremely sensitive to the length of the side chain that undergoes productive enzymatic methylation. Similar to the results with SETD7, we did not observe any SETD8-catalyzed methylation of H4Orn20 and H4hK20 under standard conditions (Fig. 3B, middle and bottom panels). Moreover, no methylation reactions were detected with Orn and hLys when additional SETD8 (10 μM) and SAM (1 mM) were used (Supplementary Figures S24–S25).
Next, we examined H3Orn9 and H3hK9 as potential substrates for G9a and GLP under standard conditions (see above) that led to the formation of fully trimethylated product H3K9me3. We did not detect any formation of mono-, di- or trimethylated ornithine in the presence of G9a/GLP and SAM (Fig. 3C and D, middle panels). On the other hand, we found that G9a and GLP produce traces (<15%) of monomethylated product H3hK9me; with G9a, a trace of dimethylated H3hK9me2 was also observed (Fig. 3C and D, bottom panels). Use of increased amounts of G9a/GLP (10 μM) and SAM (1 mM) did not enable productive methylation reactions with H3Orn9 either within 1 hour or 6 hours (Supplementary Figures S26–S27). However, such conditions resulted in the significant increase in the formation of H3hK9me and H3hK9me2 in the presence of G9a (and to a lesser extent by GLP) after 1 hour at 37 °C (Supplementary Figures S28–S29); possibly due to a slightly increased activity of the batch of recombinantly expressed G9a over GLP. Remarkably, we observed a high degree of the formed H3hK9me2, along with small amounts of monomethylated product H3hK9me and unreacted starting peptide H3hK9, after 6 hour incubation at 37 °C (Supplementary Figures S28–S29). In control experiments, H3hK9 (100 μM) was incubated with SAM (1 mM) for 1 hour and 6 hours at 37 °C; we did not detect any H3hK9me or H3hK9me2, implying that G9a and GLP are required (at 10 μM) for the methylation reactions (Supplementary Figure S30).
In order to verify that ornithine- and homolysine-containing peptides bind to G9a, we also carried out competition experiments between the 14-mer H3K9 (residues 1–14) and 15-mer H3Orn9/H3hK9 (residues 1–15) histone peptides; 14-mer H3K9 is an excellent substrate for G9a, and is trimethylated under standard assay conditions (Supplementary Figure S31). A significant decrease in the methylated product formation for 14-mer H3K9 was observed in the presence of equimolar amounts of H3Orn9; instead of H3K9me3 that was detected in the absence of H3Orn9, we observed a mixture of H3K9, H3K9me and H3K9me2 (Supplementary Figure S31). Similarly, H3hK9 inhibited G9a-catalyzed methylation of 14-mer H3K9, yielding predominantly monomethylated and dimethylated lysine; notably, no H3hK9me was observed (Supplementary Figure S31). Collectively, these results highlight that H3Orn9 and H3hK9 do bind to G9a and act as H3K9 competitive inhibitors of G9a.
Having shown that G9a and GLP have the ability to catalyze methylation of homolysine-containing histone H3hK9, we carried out additional experiments with tumor suppressor p53, another well-established non-histone substrate for KMTs22,23,24. The incubation of p53 peptides (residues 365–379), which possess Lys, Orn and hLys at position 373, in the presence of G9a/GLP and SAM for 3 hours at 37 °C revealed that ornithine is not methylated at all, whereas lysine and homolysine underwent monomethylation and dimethylation reactions (Supplementary Figures S32–S33). The comparision of abundancies of unreacted substrates along with the monomethylated and dimethylated products indicates that lysine is indeed a better substrate than homolysine for G9a/GLP-catalyzed methylations of p53 peptides. In addition, we examined p53 peptides that possess Lys, Orn and hLys at position 372 for SETD7-catalyzed reactions. Although lysine underwent monomethylation reaction in the presence of SETD7 and SAM, we detected only traces (<2%) of monomethylated homolysine and no methylation reaction on ornithine under same assay conditions (Supplementary Figure S34).
Taken together, our MALDI-TOF MS analyses reveal that lysine exhibits the optimal length of the side chain required for productive KMT catalysis. The one-methylene shorter ornithine was not methylated at all by the panel of four human KMTs under various conditions, whereas we observed that G9a and GLP have a potential to accept the one-methylene longer homolysine as a substrate, both when present on histone and p53 peptides.
NMR assays for KMT-catalyzed methylation
Having shown that H3K9 peptide underwent quantitative trimethylation in our MALDI-based assay, we then carried out more detailed NMR spectroscopic analyses on GLP-catalyzed trimethylation of the H3K9 peptide (Fig. 4). Prior to the NMR analyses of enzymatic trimethylation of H3K9, we performed complete analyses of H3K9, SAM and SAH to identify the key changes in the NMR spectra of enzymatic reaction (Supplementary Figures S35–S42). 1D and 2D NMR data reveal that the resonances at 4.31 ppm (CHα), 2.92 ppm (CH2ε), 1.79 ppm (CHβ), 1.71 ppm (CHβ), 1.62 ppm (CH2δ) and 1.37 ppm (CH2γ) ppm correspond to lysine residues of H3K9. The appearance of characteristic new resonances at 3.25 ppm (m) and 3.03 ppm (s) in the 1H NMR spectrum of the reaction mixture that contains GLP (8 μM), H3K9 peptide (400 μM) and SAM (2 mM) in Tris-D11 buffer (50 mM, pD 8.0) after 1 hour at 37 °C revealed that H3K9 peptide underwent trimethylation of K9 (Fig. 4A). The subsequent analysis of the multiplicity-edited 1H- 13C HSQC (Heteronuclear Single Quantum Correlation) spectrum revealed that the 1H resonance at 3.25 ppm (13C: 66.2 ppm) is lysine CH2ε, the result that is consistent with the previous report on SETD7 variant-catalyzed trimethylation of H3K4 peptide25, and that the singlet at 3.03 ppm is either a CH or CH3 group (Fig. 4B). The integral ratio between the peaks at 3.25 ppm and 3.03 ppm were ~2:9, suggesting that the peak at 3.03 ppm represents N(CH3)3. This was confirmed by HMBC (Heteronuclear Multiple Bond Correlation), which revealed a correlation between the singlet at 3.03 ppm and the 13C of CH2ε (66.2 ppm), and thus additionally verified the assignment of N(CH3)3 (Supplementary Figure S43). The TOCSY (Total Correlation Spectroscopy) analysis starting at Hε at 3.25 ppm revealed the Hδ (1.79 ppm), Hγ (1.38 ppm), Hβ (1.79 ppm) and Hα (4.32 ppm) resonances of the rest of the trimethylated lysine chain (Figs 4C and Supplementary Figure S43). To provide unambiguous evidence for the trimethylation of H3K9 by GLP, we also synthesized H3K9me3 and characterized it by 1D and 2D NMR spectroscopy to compare the spectroscopic data with enzymatically produced H3K9me3. The characteristic proton resonances of chemically synthesized H3K9me3 have identical chemical shifts to those seen for enzymatically produced product (Supplementary Figure S44). Comparison of 1D and 2D TOCSY data of enzymatic and chemically synthesized H3K9me3 also showed identical coupling network for the trimethylated lysine residue (Supplementary Figure S45); this was further confirmed by comparing the 1H- 13C HSQC and HMBC correlations (Supplementary Figures S45–S46).
In addition to monitoring the characteristic changes on the lysine of H3K9, we were also interested in identifying the additional resonances that arise from the enzymatic conversion of cosubstrate SAM to SAH. The new resonances in the anomeric and aliphatic region at 6.01 (d) and 2.61 (t) ppm were assigned as the methine and methylene of SAH by NMR analysis (Fig. 4A). The methylene protons next to sulphur of SAM experience especially large 1H and 13C upfield chemical shift changes upon demethylation: the CH2γ resonance appears at 3.56 ppm (ddd) and 3.36 ppm (ddd) for SAM, whereas SAH-CH2γ appears at 2.61 ppm as a triplet. The multiplicity and chemical shifts of SAH that was produced by the enzymatic process are in agreement with the spectroscopic data of the authentic sample of SAH. 1H NMR analysis also indicates that the conversion of SAM to SAH is strongly coupled to the GLP-catalyzed trimethylation of H3K9 (Supplementary Figure S47).
We then performed a control experiment to demonstrate that the methylation of lysine is an enzymatic process; under standard conditions but in the absence of GLP, we did not observe indicative resonances for trimethyllysine at 3.25 and 3.03 ppm and also for SAH at 6.01 and 2.61 ppm in the 1H NMR spectrum (Fig. 4D); this was further supported by TOCSY and HSQC analyses (Supplementary Figure S48). The conclusions of the control experiment were complemented by the MALDI analysis; in both cases, it was clearly demonstrated that trimethylation of H3K9 and conversion of SAM to SAH are enzymatic processes.
After validating that the H3K9 peptide with the natural target sequence is an excellent substrate for GLP, we examined by NMR if the enzymatic methylation of two unnatural lysine analogues, Orn and hLys, would occur. The absence of characteristic resonances for N(CH3)3 at ~3.00 ppm, the downfield resonance at ~3.25 ppm that corresponds to CH2N, and a triplet for SAH-CH2γ at 2.61 ppm, in the 1H NMR spectrum of the reaction mixture that contains GLP (8 μM), H3Orn9/H3hK9 peptide (400 μM) and SAM (2 mM) in Tris-D11 buffer (50 mM, pD 8.0) after 1 hour at 37 °C implies that ornithine and homolysine are not methylated under standard NMR conditions (Figs 4E–F and Supplementary Figures S49–S50). A longer incubation (6 hours) of H3hK9 in the presence of larger amounts of GLP (15 μM), however, led to the formation of H3hK9me2 and SAH, as indicated by new resonances at 2.79 ppm (NMe2), 3.05 ppm (CH2ζ) and 2.60 ppm (CH2γ of SAH) (Supplementary Figure S51). Additional NMR analysis of the multiplicity-edited HSQC spectrum reveals that the 1H resonance at 3.05 ppm (13C: 57.7 ppm) is hLys CH2ζ; this was further confirmed by HMBC analysis, which shows a correlation between the singlet at 2.79 ppm (NMe2) and the 13C of CH2ζ (57.7 ppm) (Supplementary Figures S52–S53). Our observed chemical shifts for NMe2 and CH2ζ match very well with the previously reported NMe2 and CH2ε shifts of LysMe2 within 0.3 ppm in 13C (observed: CH2ζ (60.2), NMe2 (45.3); literature25: CH2ε (60.5), NMe2 (45.5)) after adjusting our 13C chemical shift reference from TMS (tetramethylsilane) to DSS (4,4-dimethyl-4-silapentane-1-sulfonic acid). Overall, our NMR results indicate that ornithine- and homolysine-containing histone peptides are not methylated in the presence of GLP under standard conditions, whereas H3hK9 is predominantly dimethylated in the presence of larger amounts of GLP and prolonged incubation; these results are compatible with our MALDI-TOF analyses. The comparison of anomeric region in the 1H NMR spectrum of enzymatic reaction of H3K9 also reveals that the conversion of SAM to SAH is tightly coupled to the enzymatic trimethylation of H3K9 (Supplementary Figure S54).
Quantum mechanical/molecular dynamics studies on KMT catalysis
To understand the energetic and structural origin of the experimental observations, we also performed quantum mechanical/molecular mechanical (QM/MM) molecular dynamics (MD) and free energy (potential of mean force) simulations based on some existing X-ray structures. The representative active-site structures of the reactant complexes obtained from the simulations for the methylation in SETD7 with the lysine and ornithine substrates are given in Fig. 5B and C, respectively; the distribution map of r(CM-Nζ) and θ is also given in each case (Note: instead of Nε labelling in experimental studies, we use a common nomenclature for Nζ in computational studies). As can be seen from Fig. 5B, the lone pair of electrons on Nζ of the target lysine is well aligned with the methyl group of SAM (AdoMet). This is further demonstrated by the large population of the structures with relatively short r(CM…Nζ) distances (e.g., ≤3.5 Å) and small values of the θ angle (e.g., ≤30°). The average distance between Nζ and CM of the methyl group is approximately 3.2 Å and the θ angle is primarily within the range of 0–60°. Fig. 5C shows that for the ornithine substrate the lone pair of electrons cannot be well aligned with the methyl group, with a longer average r(CM-Nζ) distance of about 4.5 Å. Moreover, the side chain of ornithine became quite flexible with the θ angle changing between 0° and 180°. This is probably due in part to the loss of the hydrogen bond involving Y305 with ε-amino group of ornithine; i.e. the active conformation of ε-amino group is no longer stabilized by this interaction. Y305 is known to be crucial for the activity of SETD7, and the present result seems to support the suggestion that it may play a role in stabilizing the reactive configuration. The representative active-site structures of the reactant complexes for the methylation in GLP with the lysine and ornithine substrates are given in Fig. 6A and B, respectively. Similar to the cases involving SETD7, while the lone pair of electrons on Nζ of the target lysine is well aligned with the methyl group of SAM, this is not the case for the ornithine substrate, which shows a wide distribution of the θ angle and a relatively longer average distance for r(CM-Nζ). Notably, the hydrogen bond interactions involving Y1124 and the active site water were broken for the ornithine complex.
The free-energy profiles for methylation in SETD7 and GLP are plotted in Fig. 7A and B, respectively. The free energy barrier for the SETD7-catalyzed methyl transfer with the lysine substrate obtained here is quite close to our earlier results (17–18 kcal mol−1)26. It should be pointed out that in the earlier studies26,27,28,29 a scaling procedure was used to correct the errors with the previous SCC-DFTB parameters. The similarity of the free energy results reported here suggests that the new DFTB3 parameters used here are more accurate in producing free energy data and a scaling procedure may not be necessary. Fig. 7A shows that the free energy barrier with the ornithine substrate is considerably higher than that with the lysine substrate (Orn: 32.0 kcal mol−1 vs Lys: 18.8 kcal mol−1), suggesting that the enzyme would not be active on the ornithine substrate, the result that is in line with our experimental observations. A similar discussion can be made for the GLP-catalyzed monomethylation. Indeed, the results of the free energy simulations shown in Fig. 7B demonstrated that GLP would be significant less active in catalyzing monomethylation for the ornithine substrate compared to that for the lysine substrate (Orn: 27.6 kcal mol−1 vs Lys: 17.0 kcal mol−1). Since the enzyme could not add even the first methyl group to ornithine, dimethylornithine may not be produced by GLP as well.
It should be mentioned that although the structures of the reactant complexes with lysine and ornithine are very different, the structures near transition state obtained from the free energy simulations (Supplementary Figure S55) are quite close to each other with rather similar interactions. Thus, the failure of SETD7 and GLP to catalyze the ornithine methylation may be related to the inability of the enzyme to bind the ornithine substrate in a reactive conformation for methylation. This seems also to be the case, at least in part, for some homolysine complexes. Indeed, we have tried to generate the models with the homolysine substrate based on the X-ray structures and through increasing the length of the lysine chain. The enzyme complexes generated in such ways had always some poor contacts with (or were too close to) SAM, some of the active site residues (e.g. Y245 and Y305 in SETD7) or the active site water molecule (Supplementary Figures S56–S57). The steric repulsions from such poor contacts would likely make it difficult to form the reactive (near attack) conformation (as observed in the SETD7 and GLP complexes with the lysine substrate) for the efficient methyl transfer to occur.
Recent studies in the epigenetic framework have demonstrated that the state-of-the-art chemical approaches provide essential insights into understanding the fundamentals of vital epigenetic processes30,31,32,33. Our synergistic experimental and computational studies on human KMTs reported here exemplify the power of modern chemical tools in addressing the posttranslational modifications of histones. The examination of histones that possess lysine and its simplest shorter and longer analogues reveals that lysine exhibits the perfect length of the side chain for SAM-dependent KMT-catalyzed methylations. Out of four human KMTs used in this study, only GLP and G9a were able to catalyze methylation of longer homolysine in histone (poor substrate) and p53 (relatively good substrate) peptides, whereas none of the enzymes has the ability to methylate the shorter ornithine. Combined MALDI-TOF MS and NMR studies confirmed that KMT-catalyzed histone methylation is tightly coupled to the enzymatic conversion of SAM to SAH. Our experimental results were further supported by quantum mechanical/molecular dynamics studies, which provided rationale into the lack of observed methylation of ornithine. We attribute the lack of ornithine methylation to its inability to bind in the active site of KMT in a reactive conformation. On the other hand, homolysine seems to associate with enzymes in a way that either sterically clashes with the active site residues or with SAM cosubstrate, thus leading to an inadequate conformation for efficient methyl transfer reactions.
Collectively, this work highlights that histone lysine methyltransferases are highly specific epigenetic enzymes that are very sensitive to the length of the side chain of residues that undergo N-methylation reactions. In this regard, it is noteworthy that KMTs (and related enzymes) do have an ability to accept several simple SAM analogues as cosubstrates for alkylation reactions, suggesting different levels of promiscuity of SAM- and lysine-binding pockets34,35,36. In contrast to the examination of SAM analogues, a chemically diverse panel of lysine analogues has not yet been explored for KMT catalysis. The cysteine-derived lysine has been observed to be methylated by SUV39H1, a H3K9 methyltransferase, suggesting that the cysteine-derived analogue is a good functional mimic of natural lysine37. These observations along with our results demonstrate that histone lysine methyltransferases could, in principle, have an ability to methylate residues other than natural lysine. It is envisioned that future explorations of the substrate scope for KMT catalysis will importantly contribute to our understanding of epigenetic processes that play essential roles in human health and disease.
Cloning, expression and purification of human SETD7
The expression and purification of SETD7 (residues 1–366) was performed as previously described16. In brief, His-tagged SETD7 was expressed in E. coli Rosetta BL21 (DE3)pLysS cells in the presence of 0.4 mM IPTG (final concentration) and cultured overnight at 16 °C. The cells were pelleted and resuspended in lysis phosphate buffer saline (PBS) supplemented with 250 mM NaCl, 5 mM imidazole, 5% glycerol and 2 mM β-mercaptoethanol and subsequently lysed by sonication. The cell lysate was then incubated with Ni-NTA beads for 2.5 h at 4 °C. The beads were washed with 50 mL column volumes of lysis buffer containing 20 mM Tris pH 8.0, 250 mM NaCl, 50 mM imidazole and 5% glycerol, and the protein was subsequently eluted with 20 mM Tris pH 8.0, 250 mM NaCl, 250 mM imidazole, and 5% glycerol. The eluted protein was concentrated using a spinfilter device (Amicon, 3.5 MWCO) and was further purified by gel filtration chromatography, using a Superdex 75 column and 200 mM Tris pH 7.5, 20 mM NaCl at 0.5 mL min−1 flow speed.
Cloning, expression and purification of human SETD8
The expression and purification of SETD8 (residues 186–352) was carried out by following a published protocol19. Briefly, His-tagged SETD8 was expressed in E. coli Rosetta BL21 (DE3)pLysS cells in the presence of 1.0 mM IPTG (final concentration) and cultured overnight at 16 °C. Harvested cells were re-suspended into 20 mM Tris pH 7.8, 500 mM NaCl, 5 mM imidazole, 5% glycerol, and 5 mM β-mercaptoethanol, and subsequently lysed by sonication. The cell lysate was then incubated with Ni-NTA beads and the beads were then washed with 20 mM Tris pH 7.8, 500 mM NaCl, 20 mM imidazole and 5% glycerol, and the protein was subsequently eluted with 20 mM Tris pH 7.8, 500 mM NaCl, 250 mM imidazole and 5% glycerol. The eluted protein was concentrated using a spinfilter device (Amicon, 3.5 MWCO) and was further purified by gel filtration chromatography, using a Superdex 75 column and 20 mM Tris pH 7.5, 100 mM NaCl and 10 mM β-mercaptoethanol at 0.5 ml min−1 flow speed. Fractions with correct molecular weight and best purity based on SDS-PAGE were pooled and concentrated, aliquoted, snap-frozen, and stored at −80 °C.
Cloning, expression and purification of human GLP
The expression and purification of GLP (residues 951–1235) was carried out by following a reported protocol18. DNA sequence of catalytic domains of human GLP (951–1235, in pET28a-LIC vector) was used for the expression. Briefly, His-tagged GLP was expressed in E. coli Rosetta BL21 (DE3)pLysS cells in the presence of 0.1 mM IPTG (final concentration) and 0.1 mM of zinc chloride, and cultured overnight at 16 °C. Harvested cells were resuspended in lysis buffer (25 mM NaCl, 2 mM β-mercaptoethanol, PBS buffer pH 7.4, 5% glycerol, 0.1% Triton X-100). The cell lysate was then incubated with Ni-NTA beads and the beads were then washed with 20 mM Tris pH 8.0, 250 mM NaCl, 50 mM imidazole, and 5% glycerol. The protein was eluted with elution buffer (20 mM Tris pH 8.0, 250 mM NaCl, 250 mM imidazole, and 5% glycerol). The eluted protein was concentrated using a spinfilter device (Amicon, 3.5 MWCO) and was further purified by gel filtration chromatography using the AKTA system, employing a Superdex 75 column equilibrated with 20 mM Tris pH 8.0, 150 mM NaCl at 0.5 ml min−1 flow speed. Fractions were monitored by SDS-PAGE and those containing protein of the correct mass and high purity were pooled and concentrated, aliquoted, flash-frozen in liquid nitrogen, and stored at −80 °C.
Cloning, expression and purification of human G9a
The expression and purification of G9a (residues 913–1193) was carried out using the same protocol as for GLP18, except that G9a expression was induced by adding 1.0 mM IPTG and 0.1 mM of zinc chloride. DNA sequence of catalytic domains of human G9a (913–1193 residues, in pET28a-LIC vector) was used for the expression.
Solid-phase peptide synthesis
Synthetic peptides of H3, H4 and p53 were prepared manually using standard Fmoc-based solid-phase peptide chemistry on a cartridge (6 mL, Screening Devices B.V., The Netherlands). Breipohl rink amide resin was employed with H3 to afford peptides with the C-terminal amide and Wang resin was used with H4 and p53 to afford peptides with the C-terminal carboxylic acid. Coupling conditions for the amino acids: 3.0 equiv of Fmoc-amino acid, 3.6 equiv. of 1 M HOBt in DMF, and 3.3 equiv. of 1 M DIPCDI in DMF. The latter three components were premixed for 2 min and were added to the resin. The mixture was shaken for 1 h to ensure efficient coupling. All unnatural amino acids were incorporated into position 4 and position 9 of 1–15 H3 peptides and at position 20 for 13–27 H4 peptide with elongated reaction time of 16 h at room temperature. The Fmoc protecting group was removed by agitation with piperidine in DMF (20%) for 30 min. The coupling reactions and Fmoc deprotections were monitored with the colour Kaiser test. After synthesis, peptides were cleaved and deprotected from the resin by treatment with 95.0% trifluoroacetic acid/2.5% triisopropylsilane/2.5% water at room temperature for 4 h, followed by precipitation with cold diethyl ether. Crude peptides were purified by reverse phase HPLC. Fractions containing the pure peptide were combined, frozen in liquid nitrogen, and lyophilised to afford the product as a white-off solid with high purity as confirmed by analytical HPLC. Predicted masses were confirmed by MALDI-TOF MS, LC-MS, and ESI-MS. Peptides were prepared as TFA salts.
MALDI-TOF MS assays
The methyltransferase activity assays were performed by MALDI-TOF MS. The assay mixture contained the enzyme (2 µM), histone peptide (100 µM), SAM (200 μM for monomethylation and 500 μM for trimethylation), buffered in 50 mM Tris at optimal pH 8.0 (100 µL final volume). Samples were incubated in an Eppendorf vial 1.5 mL in thermomixer for 1 h at 37 °C. The assay mixtures of p53 peptide (100 µM), SAM (2 mM) and G9a/GLP/SETD7 (10 µM) were incubated for 3 h at 37 °C. A 5 μL aliquot of the reaction mixture was quenched with 5 µL of MeOH to stop the enzymatic reaction before analysis by MALDI-TOF MS. The spots were placed on a stainless steel MALDI plate (MS 96 target ground steel BC of Bruker, Germany). The mass spectra were measured in the positive reflector mode using α-cyano-4-hydroxycinnamic acid matrix. The mass corresponding to monomethylation observed as +14 Da, dimethylation observed as +28 Da, and trimethylation observed as +42 Da. Negative controls without enzyme and without SAM were included. The MALDI-TOF MS data were annotated employing FlexAnalysis software (Bruker Daltonics, Germany). All methylation experiments were carried out in duplicate.
NMR enzymatic experiments were conducted at 310 K in 50 mM Tris-D11.HCl (pD 8.0). Typically, to a premixed solution of GLP (8 μM) and SAM (2 mM), was added H3K9/H3Orn9/H3hK9 peptide (400 μM). After 1 h incubation at 37 °C in an Eppendorf vial, the reaction mixture was transferred into the NMR tube and then diluted to 500 μL and recorded by 1H NMR at 298 K. NMR spectra were recorded on a Bruker Avance III spectrometer paired with a 500 MHz magnet equipped with the Prodigy BB cryoprobe. 1H 1D spectra were acquired using presaturation to suppress the water signal with 128 or 256 transients and a relaxation delay of 4 s. 2D TOCSY spectra were acquired with presaturation of the water resonance using 1k points per transient, 8.3 kHz spin-lock for 100 ms, 56 transients per increment with a relaxation delay of 2 s and 512 increments with a sweep width of 10 ppm in each dimension. 2D 1H- 13C multiplicity-edited HSQC spectra were acquired using 1k points per transient, 64 transients per increment, a relaxation delay of 2 s, and 512 increments. The 13C sweep width spanned from −10 ppm to 130 ppm. 1H NMR characterization of substrates prior to enzymatic catalysis was performed using a 30° excitation pulse, 16–128 transients per compound, and a relaxation delay of 8 s. 1H- 13C spectra of the substrates were recorded using a 30° excitation pulse, 512–4096 transients per compound and a relaxation delay of 2 s. 1H and 13C chemical shifts were externally referenced to TMS based on the lock frequency of solvent. Adjustment of the referencing scale from TMS to DSS for comparison to literature reports was performed post-acquisition using the Absolute Referencing feature in MestreNova.
QM/MM free energy (potential of mean force) and MD simulations were performed to study the active-site dynamics of SETD7 and GLP and to calculate the free energy profiles of the methyl transfers from SAM (AdoMet) to the ε-amino group of the target lysine/ornithine residues using the CHARMM program38. The –CH2–CH2–S+(Me)–CH2– part of SAM and lysine/ornithine side chains were treated by QM and the rest of the system by MM. The link-atom approach39 was applied to separate the QM and MM regions. A modified TIP3P water model40 was employed for the solvent, and the stochastic boundary molecular dynamics method41 was used for the QM/MM simulations. The reaction region was a sphere with radius r of 20 Å, and the buffer region extended over 20 Å ≤ r ≤ 22 Å. The resulting systems contained around 5500 atoms, including about 800–900 water molecules. The DFTB3 method40,41 was used for the QM atoms, and the all-hydrogen CHARMM potential function (PARAM27)42 was used for the MM atoms. The initial coordinates for the reactant complexes of the methylation were based on the crystallographic complexes (PDB codes: 1O9S and 3HNA for SETD7 and GLP, respectively) containing, SAH (AdoHcy) and methyl lysine (i.e., the product complexes). In each of the cases, a methyl group was manually added to AdoHcy to change it to AdoMet and the methyl group(s) on the methyl lysine were manually deleted to generate the target lysine. For the models with the ornithine substrate, the ε-amino group on lysine was removed first, and the CH2 group next to Nζ on the lysine chain was changed to NζH2. The enzyme complexes with homolysine generated always had some bad contacts, and no simulations were performed with in such cases. The initial structures for the entire stochastic boundary systems were optimized using the steepest descent (SD) and adopted-basis Newton-Raphson (ABNR) methods. The systems were gradually heated from 50.0 to 298.15 K and 1-fs time step was used for integration of the equation of motion. 1.5 ns QM/MM MD simulations were carried out for each of the reactant complexes; the distribution maps of r(CM-Nζ) and θ were also generated. The umbrella sampling method43 implemented in the CHARMM program along with the Weighted Histogram Analysis Method (WHAM)44 was applied to determine the change of the free energy (potential of mean force) as a function of the reaction coordinate for the methyl transfer from SAM to the target lysine/ornithine in SETD7 and GLP. The reaction coordinate was defined as a linear combination of r(CM-Nζ) and r(CM-Sδ) [R = r(CM-Sδ) − r(CM-Nζ)]. Twenty-six (twenty-five) and thirty-two (thirty) windows were used for SETD7 (GLP) with lysine and ornithine substrates, respectively. For each window 50 ps production runs were performed after 50 ps equilibration. The force constants of the harmonic biasing potentials used in the PMF simulations were 50–400 kcal mol–1 Å–2.
Data Access Statement
All data supporting this study are provided as Supplementary Information accompanying this paper.
Bannister, A. J. & Kouzarides, T. Regulation of chromatin by histone modifications. Cell Res. 21, 381–395 (2011).
Strahl, B. D. & Allis, C. D. The language of covalent histone modifications. Nature 403, 41–45 (2000).
Black, J. C., Van Rechem, C. & Whetstine, J. R. Histone Lysine Methylation Dynamics: Establishment, Regulation, and Biological Impact. Mol. Cell 48, 491–507 (2012).
Martin, C. & Zhang, Y. The diverse functions of histone lysine methylation. Nat. Rev. Mol. Cell Biol. 6, 838–849 (2005).
Rea, S. et al. Regulation of chromatin structure by site-specific histone H3 methyltransferases. Nature 406, 593–599 (2000).
Smith, B. C. & Denu, J. M. Chemical mechanisms of histone lysine and arginine modifications. Biochim. Biophys. Acta 1789, 45–57 (2009).
Couture, J.-F., Dirk, L. M. A., Brunzelle, J. S., Houtz, R. L. & Trievel, R. C. Structural origins for the product specificity of SET domain protein methyltransferases. Proc. Natl. Acad. Sci. USA 105, 20659–20664 (2008).
Del Rizzo, P. A. & Trievel, R. C. Substrate and product specificities of SET domain methyltransferases. Epigenetics 6, 1059–1067 (2011).
Dillon, S. C., Zhang, X., Trievel, R. C. & Cheng, X. The SET-domain protein superfamily: protein lysine methyltransferases. Genome Biol. 6, 227, https://doi.org/10.1186/gb-2005-6-8-227 (2005).
Qian, C. & Zhou, M.-M. SET domain protein lysine methyltransferases: Structure, specificity and catalysis. Cell. Mol. Life Sci. 63, 2755–2763 (2006).
Schapira, M. Structural Chemistry of Human SET Domain Protein Methyltransferases. Curr. Chem. Genomics 5, 85–94 (2011).
Trievel, R. C., Beach, B. M., Dirk, L. M. A., Houtz, R. L. & Hurley, J. H. Structure and Catalytic Mechanism of a SET Domain Protein Methyltransferase. Cell 111, 91–103 (2002).
Zhang, X. & Bruice, T. C. Enzymatic mechanism and product specificity of SET-domain protein lysine methyltransferases. Proc. Natl. Acad. Sci. USA 105, 5728–5732 (2008).
Georgieva, P. & Himo, F. Quantum chemical modeling of enzymatic reactions: The case of histone lysine methyltransferase. J. Comput. Chem. 31, 1707–1714 (2010).
Krishnan, S., Horowitz, S. & Trievel, R. C. Structure and Function of Histone H3 Lysine 9 Methyltransferases and Demethylases. ChemBioChem 12, 254–263 (2011).
Xiao, B. et al. Structure and catalytic mechanism of the human histone methyltransferase SET7/9. Nature 421, 652–656 (2003).
Shinkai, Y. & Tachibana, M. H3K9 methyltransferase G9a and the related molecule GLP. Genes Dev. 25, 781–788 (2011).
Wu, H. et al. Structural Biology of Human H3K9 Methyltransferases. PLoS One 5, e8570, https://doi.org/10.1371/journal.pone.0008570 (2010).
Couture, J.-F., Collazo, E., Brunzelle, J. S. & Trievel, R. C. Structural and functional analysis of SET8, a histone H4 Lys-20 methyltransferase. Genes Dev. 19, 1455–1465 (2005).
Copeland, R. A., Solomon, M. E. & Richon, V. M. Protein methyltransferases as a target class for drug discovery. Nat. Rev. Drug Discov. 8, 724–732 (2009).
Wagner, T. & Jung, M. New lysine methyltransferase drug targets in cancer. Nat. Biotech. 30, 622–623 (2012).
Chuikov, S. et al. Regulation of p53 activity through lysine methylation. Nature 432, 353–360 (2004).
Huang, J. et al. G9a and Glp Methylate Lysine 373 in the Tumor Suppressor p53. J. Biol. Chem. 285, 9636–9641 (2010).
Couture, J.-F., Collazo, E., Hauk, G. & Trievel, R. C. Structural basis for the methylation site specificity of SET7/9. Nat. Struct. Mol. Biol. 13, 140–146 (2006).
Theillet, F.-X. et al. Site-Specific Mapping and Time-Resolved Monitoring of Lysine Methylation by High-Resolution NMR Spectroscopy. J. Am. Chem. Soc. 134, 7616–7619 (2012).
Guo, H.-B. & Guo, H. Mechanism of histone methylation catalyzed by protein lysine methyltransferase SET7/9 and origin of product specificity. Proc. Natl. Acad. Sci. USA 104, 8797–8802 (2007).
Chu, Y., Xu, Q. & Guo, H. Understanding Energetic Origins of Product Specificity of SET8 from QM/MM Free Energy Simulations: What Causes the Stop of Methyl Addition during Histone Lysine Methylation? J. Chem. Theory Comput. 6, 1380–1389 (2010).
Chu, Y., Yao, J. & Guo, H. QM/MM MD and Free Energy Simulations of G9a-Like Protein (GLP) and Its Mutants: Understanding the Factors that Determine the Product Specificity. PLoS One 7, e37674, https://doi.org/10.1371/journal.pone.0037674 (2012).
Xu, Q., Chu, Y.-z, Guo, H.-B., Smith, J. C. & Guo, H. Energy Triplets for Writing Epigenetic Marks: Insights from QM/MM Free-Energy Simulations of Protein Lysine Methyltransferases. Chem. Eur. J. 15, 12596–12599 (2009).
Chatterjee, C. & Muir, T. W. Chemical Approaches for Studying Histone Modifications. J. Biol. Chem. 285, 11045–11050 (2010).
Fierz, B. & Muir, T. W. Chromatin as an expansive canvas for chemical biology. Nat. Chem. Biol. 8, 417–427 (2012).
Luo, M. Current Chemical Biology Approaches to Interrogate Protein Methyltransferases. ACS Chem. Biol. 7, 443–463 (2012).
Müller, M. M. & Muir, T. W. Histones: At the Crossroads of Peptide and Protein Chemistry. Chem. Rev. 115, 2296–2349 (2015).
Huber, T. D., Johnson, B. R., Zhang, J. & Thorson, J. S. AdoMet analog synthesis and utilization: current state of the art. Curr. Opin. Biotechnol. 42, 189–197 (2016).
Klimašauskas, S. & Weinhold, E. A new tool for biotechnology: AdoMet-dependent methyltransferases. Trends Biotechnol. 25, 99–104 (2007).
Zhang, J. & Zheng, Y. G. SAM/SAH Analogs as Versatile Tools for SAM-Dependent Methyltransferases. ACS Chem. Biol. 11, 583–597 (2016).
Simon, M. D. et al. The Site-Specific Installation of Methyl-Lysine Analogs into Recombinant Histones. Cell 128, 1003–1012 (2007).
Brooks, B. R. et al. CHARMM: A program for macromolecular energy, minimization, and dynamics calculations. J. Comput. Chem. 4, 187–217 (1983).
Field, M. J., Bash, P. A. & Karplus, M. A combined quantum mechanical and molecular mechanical potential for molecular dynamics simulations. J. Comput. Chem. 11, 700–733 (1990).
Jorgensen, W. L., Chandrasekhar, J., Madura, J. D., Impey, R. W. & Klein, M. L. Comparison of simple potential functions for simulating liquid water. J. Chem. Phys. 79, 926–935 (1983).
Brooks, C. L., Brünger, A. & Karplus, M. Active site dynamics in protein molecules: A stochastic boundary molecular-dynamics approach. Biopolymers 24, 843–865 (1985).
MacKerell, A. D. et al. All-Atom Empirical Potential for Molecular Modeling and Dynamics Studies of Proteins. J. Phys. Chem. B 102, 3586–3616 (1998).
Torrie, G. M. & Valleau, J. P. Monte Carlo free energy estimates using non-Boltzmann sampling: Application to the sub-critical Lennard-Jones fluid. Chem. Phys. Lett. 28, 578–581 (1974).
Kumar, S., Rosenberg, J. M., Bouzida, D., Swendsen, R. H. & Kollman, P. A. THE weighted histogram analysis method for free-energy calculations on biomolecules. I. The method. J. Comput. Chem. 13, 1011–1021 (1992).
We thank the Netherlands Organization for Scientific Research (NWO, NCI-TA grant 731.015.202) for financial support. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number ACI-1053575. The research has been aided by the National Natural Science Foundation of China (No. 20903063 to P.Q.), the Natural Science Foundation of Shandong Province (No. ZR2017MB048 to P.Q.) and China Scholarship Council (No. 201408370020 to P.Q.). We thank Professor Martin Karplus for a gift of the CHARMM program and Dr. Masoud Vedadi for kindly providing KMT plasmids. We thank Marijn Maas for providing the p53 peptides.
The authors declare that they have no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Temimi, A.H.K.A., Reddy, Y.V., White, P.B. et al. Lysine Possesses the Optimal Chain Length for Histone Lysine Methyltransferase Catalysis. Sci Rep 7, 16148 (2017). https://doi.org/10.1038/s41598-017-16128-4
Scientific Reports (2020)
Chemical Communications (2020)
Organic & Biomolecular Chemistry (2019)
Communications Chemistry (2019)