To understand the osteogenic effect of the middle layer of the silk cocoon, sericin was examined for its cellular effects associated with tumor necrosis factor-α (TNF-α) signaling in this study. The fragmented sericin proteins in the silk mat were evaluated for the TNF-α expression level in murine macrophages. The concentration of protein released from silk mats was higher in the outermost and the innermost layers than in the middle layers, and the protein released from the silk mat was identified as sericin. The level of TNF-α in murine macrophages was dependent on the applied concentration of sericin, and the expression of genes associated with osteogenesis in osteoblast-like cells was dependent on the applied concentration of TNF-α. In animal experiments, silk mats from the middle layers led to a higher regenerated bone volume than silk mats from the innermost layer or the outermost layer. If TNF-α protein was incorporated into the silk mats from the middle layers, bone regeneration was suppressed compared with unloaded silk mats from the middle layers. Accordingly, silk mats from the silk cocoon can be considered to be a fragmented sericin-secreting carrier, and the level of sericin secretion is associated with TNF-α induction and bone regeneration.
Tooth loss is caused by periodontal disease, trauma, and tumours. Alveolar bone is the supporting structure of the tooth and, accordingly, loss of a tooth is followed by the loss of alveolar bone1. The regeneration of alveolar bone is important for oral rehabilitation, such as in dental implant installation2, and many types of biomaterials have been used for the regeneration of alveolar bone. Among many options, guided bone regeneration (GBR) is a simple technique that uses a membrane3. The original concept of the GBR membrane was as a barrier that inhibited the infiltration of epithelial cells into bony defects. The recently developed membrane used for GBR is not a passive barrier but acts in active osteogenesis as a drug carrier4. A collagen membrane with bone morphogenic protein is actively under investigation for the maximum gain of new bone formation4.
Silk fibroin is produced by Bombyx mori and is studied for use in scaffolding in bone grafts5. Because silk fibroin is a bio-inert material and has an osteogenic property, silk fibroin has been considered for use in GBR membranes6. The electrospinning technique or precipitation method can be used during the production of silk fibroin as a GBR membrane6,7. Although the electrospun technique can be used in mass production, the use of toxic solvents and the need for a large facility present disadvantages7. Compared with the electrospun technique, the precipitation method is simple. However, the film-type membrane produced by the precipitation technique is fragile in dry state and easily solubilized in normal saline6.
Recently, a new eco-friendly method was introduced in which the natural cocoon of the silkworm was used as a GBR membrane8. The silkworm cocoon is composed of multiple layers that can be easily separated by peeling9. Membranes originating from the middle layer of the cocoon show a similar level of bone regeneration to those of commercially available collagen membranes8. Several comparative reports have been published on natural cocoon-derived GBR membranes10,11. These studies showed that a thicker membrane obtained from the middle layer of the cocoon shows better bone regeneration than a thinner one10. Comparing the unprocessed cocoon with the membrane-originated middle layer, the middle layer group shows better bone regeneration11. Although all membranes from the silk cocoon have the same origin, the different behaviors of the GBR membrane in bone regeneration have not been explained. The differences between the silkworm cocoon layers lie in the content of sericin protein12.
The content of sericin 1 in the cocoon increases from the inner layer to the outer layer12,13. The content of sericin 3 in the cocoon decreases from the inner layer and then increases to the outer layer13. Accordingly, removals of the outermost and the innermost layers mean the removal of the sericin 1/3-rich area. If any type of sericin is beneficial for bone regeneration, a degumming process should not be required for bone tissue engineering. However, the unprocessed silk cocoon shows poor bone regeneration compared with the middle layer of the silk cocoon11. Considering that sericin is the bonding protein among fibroin fibres, excess sericin should be easily solubilized in water. Therefore, the concentration of protein released from the silk mat is higher in the innermost layer and the outermost layer of the silk cocoon than in the middle layer14. Released sericin from the silk cocoon might influence cells adjacent to the graft. To understand the osteogenic effect of the middle layer silk mat, sericin was examined for its cellular effects associated with tumor necrosis factor-α (TNF-α) signaling in this study.
TNF-α is a key cytokine involved in acute inflammation15. The level of TNF-α is increased at the implantation site of a foreign graft in response to an immune reaction15. Blood-originated cells, including macrophages, are the main source of TNF-α16. Bone formation around a foreign graft is associated with the level of TNF-α17. A high level of TNF-α is a strong activator of osteoclasts and is involved in bone resorption16,17. Controversies have emerged related to the role of a low level of TNF-α in new bone formation17,18. Silk fibroin is known to induce a low level of TNF-α at the graft site19. However, the relationship between sericin and TNF-α induction is still controversial. Because the degumming process and origin of sericin differ in each study, the direct comparisons between studies are difficult. If sericin released from the silk mat induced a different level of TNF-α leading to activation or suppression of new bone formation, the mechanism explaining the different behavior of each layer of silk cocoon in bone regeneration could be revealed.
In this study, the silk cocoon was separated into 4 layers with the same thickness, and the concentration of sericin released from the surface of each silk mat was measured. A sericin solution from each silk mat was applied to macrophages, and the level of TNF-α was measured. In addition to released sericin, sericin from degumming products was also applied to macrophages, and the level of TNF-α was measured and compared with the results from each silk mat. The effect of TNF-α on osteoblasts was also tested. Finally, each silk mat was applied to calvarial defects in an animal model, and new bone formation was analysed. Accordingly, the purpose of this study was to analyse the effect of TNF-α induced by each silk mat layer on bone regeneration.
Strength of each silk mat and the concentration of released protein
The tensile strength of layer 1 was the highest among the 4 silk mat groups (Table 1). The difference in the tensile strength among the groups was statistically significant (P = 0.014). In the post hoc test, the tensile strength was significantly higher in the layer 1 group compared with the layer 3 group (P = 0.020). No statistically significant differences were noted between the layer 2 and the layer 3 groups (P > 0.05). In the case of tensile strain, that of layer 4 was the highest among the 4 silk mat groups (Table 1). The difference in the tensile strain among the groups was statistically significant (P = 0.001). In the post hoc test, the tensile strain was significantly higher in the layer 4 group compared with the layer 2 group and the layer 3 group (P = 0.002 and 0.014, respectively). No statistically significant differences were observed between the layer 2 and the layer 3 groups (P > 0.05).
Figure 1 shows the characteristic vibrational absorptions of the silk protein at 1626 (amide I), 1520 (amide II), and 1236 cm−1 (amide III). The distinct absorption at 3280 cm−1 can be assigned to hydrogen-bonded N–H stretching (amide A). The absorptions in the region of 2800–3000 cm−1 are due to C–H stretching modes. Particularly, it is well known that the amide I peak is highly sensitive to protein secondary structures20,21. The second derivatization of the amide I absorption can reasonably resolve the sub-component secondary structures of silk protein. In this study, silk protein consists of a β-sheet (1620, 1650, and 1699 cm−1) structure as a major component, as well as β-turn (1682 cm−1) and helix (1663 cm−1) structures as minor components. The composition of the secondary protein structure does not show significant changes with layer number and location inside or outside of the layers. The sonication treatment retained the secondary protein structure composition. Additionally, one notable point was that the C–H stretching peaks were strengthened after sonication in the outside layers in the order of layer 1 to layer 4 (indicated by an asterisk). For layer 4, the C–H stretching peak was maximized, and several additional peaks were observed at 1387, 1248, 1153, and 953 cm−1 after sonication treatment (indicated by arrows). The 1387 cm−1 peak is assigned to O–H bending, and the other three absorption peaks are assigned to C–O stretching. These enhanced IR absorption peaks are considered related to the protein released after sonication.
The total protein concentration in saline was highest in the layer 4 group. The protein concentrations were 10.16 ± 0.08 μg/ml, 3.38 ± 0.01 μg/ml, 3.44 ± 0.02 μg/ml, and 8.26 ± 0.21 μg/ml for layer 1, layer 2, layer 3, and layer 4, respectively (Fig. 2A). The difference in the concentration of the released protein among groups was statistically significant (P < 0.001). In the post hoc test, the concentration of released protein was significantly higher in the layer 1 group and the layer 4 group compared with the layer 2 group and the layer 3 group (P < 0.001 for all comparisons). However, no statistically significant differences were found between the layer 2 and the layer 3 groups (P > 0.05). Comparing the SEM images of the silk mat before and after sonication, dissociated silk fibroin fibre caused by the dissolution of bonding protein was prominent in the layer 2 and the layer 3 groups (Fig. 2B). Despite the high amount of bonding protein release, the main fibres appeared to be intact in the layer 1 and the layer 4 groups.
Soluble proteins from the silk mat were identified using two-dimensional gel electrophoresis and LC MS/MS analysis (Supplementary Fig. 1). In two-dimensional electrophoresis, large protein clusters were identified at pH 3, and their molecular weights were between 15 and 50 kDa. Only fragments of sericin were present in the selected area, and the other protein was not identified.
Sericin increases the expression of TNF-α in RAW264.7 cells
When sericin was administered to RAW264.7 cells, the expression level of TNF-α was increased in a dose-dependent manner (Fig. 3A). The concentration of solubilized sericin was different for each silk mat, and, accordingly, the expression level of TNF-α in each silk mat was also different. The expression level of TNF-α was highest in the layer 1 group, followed by the layer 4 group (Fig. 3B). The expression level of TNF-α was low in the layer 2 and the layer 3 groups. According to the ELISA results, TNF-α was not detected in 1 to 5 ng/ml of sericin at 2 h (Fig. 3C). However, the concentrations of TNF-α at 24 h were 209.07 ± 35.59, 602.97 ± 88.55, and 982.71 ± 8.30 pg/ml for the 1, 5, and 10 ng/ml sericin groups, respectively. The difference among groups was statistically significant (P < 0.001).
Low concentrations of TNF-α enhance osteogenic gene expression in C2C12 cells
To confirm the effect of TNF-α on osteogenic gene expression in C2C12 cells, cells were incubated for 0, 4, 8, and 48 h in the presence of various concentrations of TNF-α (0.1 to 10 ng/ml). When cells were treated with low concentrations of TNF-α (0.1 and 1 ng/ml), an increase in the ALP mRNA expression level was observed at 4 h in contrast to the results from treatment with 10 ng of TNF-α. The significant increase in ALP mRNA expression with low concentrations of TNF-α (0.1 and 1 ng/ml) was still observed up to 48 h (Fig. 4).
When cells were treated with low concentrations of TNFα (0.1 and 1 ng/ml), the levels of Runx2 mRNA expression increased after 8 h. In the case of Runx2, the effect of a low concentration of TNFα on mRNA expression was not sustained until late time points. In the case of osteocalcin, the level of mRNA expression after treatment with low concentrations of TNF-α (0.1 and 1 ng/ml) remained largely unchanged or slightly decreased compared with that of the untreated control, whereas the level of mRNA expression after treatment with 10 ng/ml TNF-α decreased remarkably over time. Western blot assay showed increases in the protein expression of Runx2 and osteocalcin in C2C12 cells incubated with low concentrations of TNF-α (0.1 and 1 ng/ml) at 48 h (Supplementary Fig. 2).
The layer 2/3 group showed the highest bone volume and TNF-α immuno-staining similar to the unfilled control
The results of μ-CT analysis are shown in Fig. 5. The radiologic analysis revealed that after 8 weeks of implantation, the bone volume in each silk mat group showed a significant difference (Fig. 5; P = 0.007). The bone volumes in the unfilled control, layer 1, layer 2/3, layer 4, and layer 2/3 + TNF-α were 0.44 ± 0.41 mm3, 0.68 ± 0.68 mm3, 4.18 ± 2.66 mm3, 2.42 ± 1.76 mm3, and 2.91 ± 2.03 mm3, respectively, at 8 weeks after the operation. The unfilled control group and the layer 1 group reflected only partial bone filling from the margins of the defects. In the post hoc test, the bone volume was significantly increased in the layer 2/3 group compared with the unfilled control and the layer 1 groups (P = 0.018 and 0.022, respectively). No statistically significant differences were noted between the layer 2/3 + TNF-α group and the other groups (P > 0.05).
The intensities of TNF-α staining in the unfilled control, layer 1, layer 2/3, layer 4, and layer 2/3 + TNF-α were 73.11 ± 7.49, 109.48 ± 11.46, 89.70 ± 11.79, 119.86 ± 9.64, and 129.32 ± 21.79, respectively (Fig. 6). The intensity of TNF-α staining in each silk mat group showed a significant difference (P < 0.001). In the post hoc test, the intensity of TNF-α staining was significantly lower in the layer 2/3 group than in the layer 4 and layer 2/3 + TNF-α groups (P = 0.025 and 0.001, respectively). No statistically significant differences were found between the layer 2/3 group and the unfilled control group (P > 0.05). Sirius staining demonstrated that the collagen-enriched regions were more prominent in the layer 2/3 group (Fig. 6). Low inflammation was visualized in the layer 2/3 group, and the expression level of TNF-α was also lower in the layer 2/3 group (Fig. 6).
The silkworm cocoon is composed of multiple layers of silk mat. In this study, the silk cocoon was separated into 4 layers. The concentration of released protein was highest in the layer 1 group, followed by the layer 4 group (Fig. 2). The released protein was mainly identified as sericin (Supplementary Fig. 1), and sericin increased the expression level of TNF-α in RAW264.7 cells in a dose-dependent manner (Fig. 3). Accordingly, the layer 1 group and the layer 4 group showed higher levels of TNF-α in RAW264 cells than the layer 2 and the layer 3 groups (Fig. 3). Application of low levels of TNF-α increased the level of ALP and Runx2 in osteoblast-like cells, but this effect was not observed with high levels of TNF-α (Fig. 4). In vivo experiments also demonstrated that the layer 2/3 group showed greater bone regeneration than the unfilled control group and the layer 1 group (Fig. 5). Bone regeneration in the layer 2/3 group was reversed by a high level of TNF-α loading (Fig. 5).
The content of sericin 1 increases from the inner layer to the outer layer of the silkworm cocoon13,22. The content of sericin 3 in the cocoon decreases from the inner layer and then increases to the outer layer13. Seroin 1 is a small sized (11–13 kDa) anti-microbial protein23 and increases from the outer layer to the inner layer of the silkworm cocoon13. The content of fibroin is similar among layers, but the relative abundance of proteins is higher in the innermost and in the outermost layer13. Therefore, the concentrations of released protein were higher in layer 1 and layer 4 (Fig. 2A). The concentration of sericin is acutely increased at the outer layer of the silkworm cocoon by more than 30%22. Although the molecular weight of sericin is greater than 200 kDa, when it is solubilized in water from the silk mat, it is fragmented24. Fragmented sericin is amorphous and has a low molecular weight24, but because sericin is a bonding protein, it can reunite after fragmentation. For this reason, no specific protein spot was noted from two-dimensional electrophoresis analysis (Supplementary Fig. 1B). The difference in tensile strength among the silk mat groups could be explained by considering the content of sericin and porosity. Sericin has lower tensile strength compared to fibroin25. The porosity is highest at the outermost layer and decreases into the inner layer26. Accordingly, the tensile strength was higher in layer 1 than in the other layers (Table 1).
Sericin is a degumming product of the silkworm cocoon and is treated as industrial waste27. The solubility of sericin is temperature dependent, and sericin is soluble in hot water28. In addition to high temperature, acidic solutions, alkali solutions and urea can be used to extract sericin from the silkworm cocoon29. At room temperature, the accumulated amount of sericin released from the silkworm cocoon reaches 8 to 12 μg/ml over a period of 38 days14. In this study, the concentration of released sericin was 3 to 10 μg/ml over a period of 4 h (Fig. 2A). The difference in the released amount might be due to differences in the extraction method. The molecular weight of sericin and the efficiency of extraction changed according to the extraction methods30. Sericin has many beneficial effects, and sericin products are used in hair care, cosmetics, and biomaterials31. Soluble sericin is viewed as a biologically inert protein32. Because soluble sericin is released from the silkworm cocoon, the cocoon itself has been used in biomedical applications11,33. Therefore, the silkworm cocoon should be considered to be a drug carrier that releases sericin slowly at body temperature.
The released protein from each silk mat was identified as sericin (Supplementary Fig. 1). When sericin was administered to RAW264.7 cells, the expression level of TNF-α increased in a dose-dependent manner (Fig. 3A). Sericin can also increase the levels of inflammation-related cytokines34. Because the concentration of released protein was highest in the layer 1 group, the expression level of TNF-α in RAW264.7 cells was also highest in the layer 1 group (Fig. 3B). Because the concentration of released protein was low in the layer 2 and the layer 3 groups, the expression level of TNF-α in RAW264.7 cells was also low in the layer 2 and the layer 3 groups (Fig. 3B). In this study, a low level of TNF-α could increase ALP and Runx2 gene expression (Fig. 4). Runx2 is an important transcription factor in osteogenesis and can increase the expression level of genes associated with bone formation, such as BMP and Wnt, among others35. When a low level of TNF-α (10 ng/mL) was administered to dental pulp-derived stem cells, osteogenic differentiation was induced via the nuclear factor-κB (NF-κB) signalling pathway36. However, a higher concentration of TNF-α (100 ng/mL) reduces the expression of BMP-2, ALP and Runx237. Alginate dressing can accelerate wound healing by elevating the level of TNF-α38. However, this trend was not evident for 10 ng/mL of TNF-α administration (Fig. 4), perhaps due to the difference in the cell type used. Considering that the induced concentration of TNF-α was dependent on the administered concentration of sericin, new bone formation from each silk mat was expected to be different according to the layer of the silkworm cocoon. Indeed, a low concentration of sericin (<0.0001%) increased ALP activity and Alizarin red staining in MC3T3-E1 cells, but a high concentration of sericin (>0.001%) strongly inhibited ALP activity and Alizarin red staining14.
In this study, the bone volume at 8 weeks after surgery was highest in the layer 2/3 group (Fig. 5). When a high concentration of TNF-α (5 μg) was loaded into the layer 2/3 group, the gain in bone volume was decreased (Fig. 5). TNF-α is involved in inflammation and the development of osteoclasts39. Accordingly, TNF-α is associated with foreign body-induced inflammation and bone loss40. Prosthetic hip or knee joint-related osteolysis is induced by wear debris from the prosthetics41. Unlike metallic wear debris, sericin released from silk mat is a degradable protein. However, the released concentrations of sericin differed among silk mats, and this difference seemed to influence bone regeneration via the TNF-α-mediated pathway (Fig. 7). TNF-α alone inhibits the differentiation of tendon-derived stem cells, but TNF-α increases the proliferation of stem cells in combination with TGF-β142. Osteogenic differentiation of dental pulp stem cells can be increased by the application of TNF-α via the NF-κB pathway43. In the initial inflammatory phase, TNF-α works together with BMPs to induce bone regeneration44. Selected inflammatory pathologic conditions, such as ankylosing spondylitis45 or periostitis ossificans46, can result in excessive bone formation. Induction of controlled inflammation is a strategy for the development of bone graft materials47,48, and a short duration of inflammation can increase new bone formation49. Concurrent treatment of TNF-α combined with BMP-2 results in higher bone formation than treatment with a single cytokine44. If TNF-α is administered locally at 24 h after injury, fracture healing is accelerated50. Macrophages can be used during the production of TNF-α because macrophages are important in alloplast-induced bone formation51. A high concentration of TNF-α (100 ng/ml) decreased alkaline phosphatase activity and reduced the expression of osteogenic genes in bone marrow-derived cells18. Runx2 is regulated by the WNT pathway and is an important transcription factor for bone formation52. Administration of a high concentration of TNF-α (10 ng/ml or 100 ng/ml) increases gene expression of BMP-2, but suppresses osteogenic differentiation in bone marrow cells53.
Drug delivery platform for tissue engineering is important for therapeutic effects and reduced complication associated drug administration54. Classic materials for tissue engineering has many limitations and natural biomolecules have been illuminated as biocompatible and bio-degradable platform55. Fragmented sericin (15–60 kDa) does not induce the antibody formation in the rabbits and the controlled release of sericin accelerate tissue regeneration56. Smart materials can be defined as “being responsive or instructive, or a combination of both these qualities”57. Smart materials let cells to do as a desired manner. These smart materials can overcome the limitations of conventional materials and silk based natural polymers are example of smart materials58. Because silk mat is produced by an eco-friendly method, it has been considered for use in clinical applications, but no guidelines exist for its use in clinical applications. In this study, we demonstrated that TNF-α induction in macrophages was dependent on the concentration of sericin administered and could influence bone regeneration. Accordingly, silk mat from silk cocoon could be considered fragmented sericin secreting carrier and the level of sericin secretion was associated with TNF-α induction and bone regeneration.
Materials and Methods
This study was approved by Gangneung-Wonju National University. All experiments were performed in accordance with the relevant guidelines and regulations.
Preparation of the silk cocoon and scanning electron microscopic (SEM) examination
Silkworm cocoons originated from mulberry silkworms (Bombyx mori) supplied by the Rural Development Administration (Wanju, Korea). The cocoon was sliced, and four layers were separated with even thickness. The material was cut into 10 × 10 mm squares using micro-scissors. The separated layers were classified by their deposition of silk fibres on the cocoons. The innermost layer was set as layer 1, and the outermost layer was set as layer 4. The thickness of each layer was approximately 0.2 mm. The morphology of the separated layers was observed by SEM. Images were captured by the SEM (Hitachi, SU-70, Japan) at 5 keV.
Attenuated total reflectance Fourier transform infrared (ATR-FT-IR) spectroscopy and physical strength test
ATR-FT-IR measurements were performed by the Korea Basic Science Institute (Daegu, Korea). Subsequent procedures were conducted in accordance with our previous publication14. The physical strength of each silk mat was tested by the Korea Institute of Industrial Technology (Gangneung, Korea). Samples were prepared with dimensions of 30 × 10 mm, and both sides were fixed for measurement.
Protein release analysis and identification
The weight of each layer was 2 g. The layers were placed in 50 mL of saline at 25 °C and sonicated for 4 h. Supernatant was collected for the analysis. The protein concentration in saline was measured by spectroscopy at 280 nm. The control was bovine albumin.
The solution of released proteins was collected and applied to SDS-PAGE to examine the protein profile. After SDS-PAGE, all solutions were mixed with the same volume and subjected to two-dimensional gel electrophoresis. Subsequent experiments were referred to ProteomeTech Inc. (Seoul, Korea). Amino acid sequencing was performed for the protein spots identified in two-dimensional gel electrophoresis. After fragmentation with trypsin, LC MS/MS was used in protein identification.
In vitro cell culture was conducted using C2C12 pre-osteoblast cells (ATCC, Manassas, VA, USA) and RAW264.7 cells (KCLB No. 40071). The cells were grown to 80% confluence in alpha-MEM (HyClone, Logan, Utah, USA) and Dulbecco’s modified Eagle’s medium-high glucose (PAA Laboratories, Linz, Austria), respectively, containing 1% penicillin/streptomycin (100X) supplemented with 10% autologous serum. The cells were maintained at 37 °C in an atmosphere of 5% CO2 and 99% relative humidity. Various concentrations of silk sericin or sericin released from the silkworm cocoon were applied to cultured RAW264.7 cells to evaluate the level of TNF-α expression. The effect of TNF-α on the expression level of osteogenic genes was tested in C2C12 cells. The number of cells seeded per well was 5 × 104.
Reverse transcription-polymerase chain reaction (RT-PCR)
Total RNA was isolated from C2C12 cells using the easy-BLUE™ (iNtRON Biotechnology, Kyungki-Do, Korea) RNA extraction reagent. cDNA was synthesized from total RNA using AccuPower RT PreMix (Bioneer, Daejeon, Korea) and was subsequently used in quantitative real time-PCR amplification using AccuPower®2X GreenStar™ qPCR MasterMix (Bioneer). The forward and reverse primers for the real-time PCR of mouse genes are listed as follows (5′ → 3′): GAPDH F: TCA ATG ACA ACT TTG TCA AGC and R: CCA GGG TTT CTT ACT CCT TGG, ALP F: CCA ACT CTT TTG TGC CAG and R: GGC TAC ATT GGT GTT GAG CTT TT, Runx2 F: TTC TCC AAC CCA CGA ATG CAC and R: CAG GTA CGT GTG GTA GTG AGT, Osteocalcin F: CTG ACA AAG CCT TCA TGT and R: GCG CCG GAG TCT GTT CAC, Osterix F: CCC ACC CTT CCC TCA CTC and R: CCT TGT ACC ACG AGC CAT. GAPDH was used as the normalization reference of each sample for quantification.
Western blot and ELISA
To assess the inflammatory effect of the sericin released from each silk mat on RAW264.7 cells, 2.0 g of each silk net was dipped in 50 mL of normal saline and sonicated at 37 °C for 4 h, and the supernatant was subsequently collected. Prior to cellular treatment, high performance liquid chromatography (Agilent 1100 series, Agilent Technologies, Waldbronn, Germany) was performed on each leeched solution. The column was a non-coated and non-adherent silicate column, and the solvent was distilled water. The same volume of leeched solution from each net (750 μL) was applied to cultured RAW264.7 cells. Protein was collected at 2, 8 and 24 hours after administration. The collected proteins were mixed with reducing buffer, and the subsequent procedure was conducted as reported previously54. The antibody used in western blot analysis was purchased from Santa Cruz Biotechnology (cat#: sc-12744, Santa Cruz, CA, USA).
The cells were washed with PBS and scraped into PRO-PREP™ Protein Extraction Solution (iNtRON Biotechnology). Equal amounts of proteins were subjected to SDS-PAGE and subsequently electro-transferred onto a PVDF membrane. The membrane was blocked with 5% non-fat dry milk in Tris-buffered saline containing 0.1% Tween 20 and incubated with the relevant primary antibody, followed by incubation with the corresponding HRP-conjugated secondary antibody. Anti-osteocalcin antibody was purchased from Santa Cruz Biotechnology, and anti-Runx2 antibody was sourced from Medical & Biological Laboratories (Woburn, MA, USA). Anti-β-actin antibody and HRP-conjugated secondary antibodies were obtained from Santa Cruz Biotechnology. Labelled protein bands were visualized using the ECL reagent (Bio-Rad, Hercules, CA, USA), and luminescence was detected with Chemi-doc® (Bio-Rad).
ELISA for TNF-α was performed for RAW264.7 cells. Silk sericin was applied to RAW264.7 cells at concentrations of 1, 5, and 10 ng/ml, and the supernatant was collected. ELISA was conducted using a commercially available kit (Cat#: KMC3011, Invitrogen, Carlsbad, CA, USA) and the detailed protocol supplied by the manufacturer.
This experiment was approved by the Institutional Animal Care and Use Committee of Gangneung-Wonju National University, Gangneung, Korea (GWNU-2013-10). Sprague-Dawley rats at 12 weeks old (n = 25) were used in this experiment. Anaesthesia consisted of intramuscular injection with a combination of 0.5 mL Tiletamine and Zolazepam (125 mg/mL of 1:1 mixture; Zoletil; Bayer Korea, Seoul, Korea) and 0.5 mL xylazine hydrochloride (10 mg/kg body weight; Rompun; Bayer Korea, Seoul, Korea). After treatment with chemical disinfectant, the cranium area was shaved. An incision was made on the mid-sagittal area of cranium, and the parietal bone was exposed by sharp subperiosteal dissection. A dental-trephine burr with an 8 mm diameter was used in the preparation of a full thickness bony defect on the midline. Twenty-five animals were used in the comparative study of each layer of the silk mats (10 × 10 mm). The silk mat was placed on the calvarial defect. Because layer 2 and layer 3 had shown similar behaviour in the cellular experiments, layer 2 and layer 3 were mixed and grouped as layer 2/3. The control group did not receive any silk mat. To assess the effect of TNF-α on bone regeneration, 5 μg of recombinant rat TNF-α (#400-14, PeproTech) was loaded onto each silk mat from layer 2/3 and set as the layer 2/3 + TNF-α group. For the four types of silk mats (i.e., layer 1, layer 2/3, layer 4 and layer 2/3 + TNF-α), each type of mat was placed on the bone defect. Each rat was individually caged and fed, and after 8 weeks, all animals were sacrificed.
Micro-computerized tomography and histomorphometric evaluation
The calvarial specimens (12 × 12 × 3 mm) were sent to the Korea Basic Science Institute (Ochang, Korea) for micro-CT analysis. The subsequent procedure was performed in accordance with the description in our previous publication28. In brief, an animal PET/CT/SPECT system (Inveon Siemens, Malvern, PA, USA) was used in analysis. The scanned images were reconstructed using the supplied software (Inveon Siemens). The size of the initial surgical defect was referenced to determine the region of interest (ROI). The bone volume (BV) in the ROI was calculated by setting a threshold level of 25% bone standard.
After image analysis by micro-CT, the specimens were processed for histological analysis by decalcification. The specimens were cut into two pieces on the mid-sagittal suture and were embedded to show the sagittal section. Collagen staining was performed with a commercially available kit (ab150681, Abcam, Cambridge, UK). The subsequent procedure was applied in accordance with the manufacturer’s protocol. Deparaffinized sections were placed into picro-sirius red solution for 1 h and washed twice in acetic acid solution. To determine the level of TNF-α expression in the tissue, immunohistochemical staining was performed using anti-TNF-α antibodies (Santa Cruz) at a dilution ratio of 1:5059.
The analysis of variance test was used to compare multiple groups, and Bonferroni’s method was selected for the post hoc test. The significance level was P < 0.05.
Data availability statement
Data sharing not applicable to this article as no datasets were generated or analysed during the current study.
Ethical approval and informed consent
This study was approved by Gangneung-Wonju National University. Animal experiment was approved by the Institutional Animal Care and Use Committee of Gangneung-Wonju National University, Gangneung, Korea (GWNU-2013-10). All experiments were performed in accordance with the relevant guidelines and regulations.
Lee, J. W. et al. Retrospective clinical study of an implant with a sandblasted, large-grit, acid-etched surface and internal connection: analysis of short-term success rate and marginal bone loss. Maxillofac. Plast. Reconstr. Surg. 38, 42 (2016).
Kim, Y. H., Choi, N. R. & Kim, Y. D. The factors that influence postoperative stability of the dental implants in posterior edentulous maxilla. Maxillofac. Plast. Reconstr. Surg. 39, 2 (2017).
Bottino, M. C. et al. Recent advances in the development of GTR/GBR membranes for periodontal regeneration—a materials perspective. Dent. Mater. 28, 703–721 (2012).
Jo, J. Y. et al. Sequential delivery of BMP-2 and BMP-7 for bone regeneration using a heparinized collagen membrane. Int. J. Oraδl Maxillofac. Surg. 44, 921–928 (2015).
Kundu, B. et al. Silk proteins for biomedical applications: bioengineering perspectives. Prog. Polym. Sci. 39, 251–267 (2014).
Yoo, C. K., Jeon, J. Y., Kim, Y. J., Kim, S. G. & Hwang, K. G. Cell attachment and proliferation of osteoblast-like MG63 cells on silk fibroin membrane for guided bone regeneration. Maxillofac. Plast. Reconstr. Surg. 38, 17 (2016).
Kim, K. H. et al. Biological efficacy of silk fibroin nanofiber membranes for guided bone regeneration. J. Biotechnol. 120, 327–339 (2005).
Ha, Y. Y., Park, Y.-W., Kweon, H., Jo, Y.-Y. & Kim, S.-G. Comparison of the physical properties and in vivo bioactivities of silkworm-cocoon-derived silk membrane, collagen membrane, and polytetrafluoroethylene membrane for guided bone regeneration. Macromol. Res. 22, 1018–1023 (2014).
Chen, F., Porter, D. & Vollrath, F. Morphology and structure of silkworm cocoons. Mater. Sci. Eng. C 32, 772–778 (2012).
Seok, H., Kim, M. K., Kim, S.-G. & Kweon, H. Comparison of Silkworm-Cocoon–Derived Silk Membranes of Two Different Thicknesses for Guided Bone Regeneration. J. Craniofac. Surg. 25, 2066–2069 (2014).
Kim, S. G. et al. Comparison of unprocessed silk cocoon and silk cocoon middle layer membranes for guided bone regeneration. Maxillofac. Plast. Reconstr. Surg. 38, 11 (2016).
Kaur, J. et al. Photoprotection by silk cocoons. Biomacromolecules 14, 3660–3667 (2013).
Zhang, Y. et al. Comparative proteome analysis of multi-layer cocoon of the silkworm, Bombyx mori. PLoS ONE 10, e0123403 (2015).
Kweon, H. et al. In vivo bone regeneration ability of different layers of natural silk cocoon processed using an eco-friendly method. Macromol. Res. 25, 806–816 (2017).
Merkel, K. D. et al. Tumor necrosis factor-α mediates orthopedic implant osteolysis. Am. J. Pathol. 154, 203–210 (1999).
Ligresti, G., Aplin, A. C., Zorzi, P., Morishita, A. & Nicosia, R. F. Macrophage-derived tumor necrosis factor-α is an early component of the molecular cascade leading to angiogenesis in response to aortic injury. Arterioscler. Thromb. Vasc. Biol. 31, 1151–1159 (2011).
Algate, K., Haynes, D., Bartold, P., Crotti, T. & Cantley, M. The effects of tumour necrosis factor‐α on bone cells involved in periodontal alveolar bone loss; osteoclasts, osteoblasts and osteocytes. J. Periodontal Res. 51, 549–566 (2016).
Huang, H. et al. Dose‐specific effects of tumor necrosis factor alpha on osteogenic differentiation of mesenchymal stem cells. Cell Prolif. 44, 420–427 (2011).
Cui, X. et al. A pilot study of macrophage responses to silk fibroin particles. J. Biomed. Mater. Res. A 101, 1511–1517 (2013).
Kong, J. & Yu, S. Fourier transform infrared spectroscopic analysis of protein secondary structures. Acta Biochim. Biophys. Sin. 39, 549–559 (2007).
Jo, Y. Y. et al. Silk Fibroin-Alginate-Hydroxyapatite Composite Particles in Bone Tissue Engineering ApplicationsIn Vivo. Inter. J. Mol. Sci. 18, 858 (2017).
Mondal, M. The silk proteins, sericin and fibroin in silkworm, Bombyx mori Linn.,-a review. Casp. J. Envir. Sci. 5, 63–76 (2007).
Singh, C. P., Vaishna, R. L., Kakkar, A., Arunkumar, K. P. & Nagaraju, J. Characterization of antiviral and antibacterial activity of Bombyx mori seroin proteins. Cell. Microbiol. 16, 1354–1365 (2014).
Mandal, B. B., Priya, A. S. & Kundu, S. Novel silk sericin/gelatin 3-D scaffolds and 2-D films: fabrication and characterization for potential tissue engineering applications. Acta Biomater. 5, 3007–3020 (2009).
Guan, J. et al. Comparing the microstructure and mechanical properties of Bombyx mori and Antheraea pernyi cocoon composites. Acta Biomater. 47, 60–70 (2017).
Chen, F., Porter, D. & Vollrath, F. Silk cocoon (Bombyx mori): Multi-layer structure and mechanical properties. Acta Biomater. 8, 2620–2627 (2012).
Kunz, R. I., Brancalhão, R. M., Ribeiro, L. F. & Natali, M. R. Silkworm Sericin: Properties and Biomedical Applications. Biomed. Res. Int. 2016, 8175701 (2016).
Kataoka, K. On the solubility of sericin in water. J. Sericult. Sci. Jap. 46, 227–230 (1977).
Rajput, S. & Kumar, M. Sericin—a unique biomaterial. IOSR J. Polym. Text. Eng. 2, 29–35 (2015).
Yang, M. et al. Tuning molecular weights of Bombyx mori (B. mori) silk sericin to modify its assembly structures and materials formation. ACS Appl. Mater. Interfaces 6, 13782–13789 (2014).
Kundu, S. C., Dash, B. C., Dash, R. & Kaplan, D. L. Natural protective glue protein, sericin bioengineered by silkworms: potential for biomedical and biotechnological applications. Progr. Polym. Sci. 33, 998–1012 (2008).
Panilaitis, B. et al. Macrophage responses to silk. Biomaterials 24, 3079–3085 (2003).
Yu, K. et al. In situ assembly of Ag nanoparticles (AgNPs) on porous silkworm cocoon-based would film: enhanced antimicrobial and wound healing activity. Sci. Rep. 7, 2107 (2017).
Aramwit, P., Kanokpanont, S., De-Eknamkul, W. & Srichana, T. Monitoring of inflammatory mediators induced by silk sericin. J. Biosci. Bioeng. 107, 556–561 (2009).
Xu, J., Li, Z., Hou, Y. & Fang, W. Potential mechanisms underlying the Runx2 induced osteogenesis of bone marrow mesenchymal stem cells. Am. J. Transl. Res. 7, 2527–2535 (2015).
Qin, Z. et al. High dose of TNF-α suppressed osteogenic differentiation of human dental pulp stem cells by activating the Wnt/β-catenin signaling. J. Mol. Histol. 46, 409–420 (2015).
Feng, G. et al. RAC1 regulate tumor necrosis factor‐α‐mediated impaired osteogenic differentiation of dental pulp stem cells. Dev. Growth Differ. 57, 497–506 (2015).
Thomas, A., Harding, K. & Moore, K. Alginates from wound dressings activate human macrophages to secrete tumour necrosis factor-α. Biomaterials 21, 1797–1802 (2000).
Veronesi, F., Tschon, M. & Fini, M. Gene Expression in Osteolysis: Review on the Identification of Altered Molecular Pathways in Preclinical and ClinicalStudies. Inter. J. Mol. Sci. 18, 499 (2017).
Lin, T. H. et al. Chronic inflammation in biomaterial-induced periprosthetic osteolysis: NF-κB as a therapeutic target. Acta Biomater. 10, 1–10 (2014).
Ulrich, S. D. et al. Total hip arthroplasties: what are the reasons for revision? Int. Orthop. 32, 597–604 (2008).
Han, P. et al. Tumor necrosis factor-α and transforming growth factor-β1 facilitate differentiation and proliferation of tendon-derived stem cells in vitro. Biotechnol. Lett. 39, 711–719 (2017).
Feng, X. et al. TNF‐α triggers osteogenic differentiation of human dental pulp stem cells via the NF‐κB signalling pathway. Cell. Biol. Int. 37, 1267–1275 (2013).
Croes, M. et al. Local induction of inflammation affects bone formation. Eur. Cell. Mater. 33, 211–226 (2017).
Haynes, K. R. et al. Excessive bone formation in a mouse model of ankylosing spondylitis is associated with decreases in Wnt pathway inhibitors. Arthritis Res. Ther. 14, R253 (2012).
Blazejewski, S. W. III et al. Mandibular periostitis ossificans in immature large breed dogs: 5 cases (1999–2006). J. Vet. Dent. 27 (2010).
Gerstenfeld, L. et al. Impaired Fracture Healing in the Absence of TNF‐α Signaling: The Role of TNF‐α in Endochondral Cartilage Resorption. J. Bone Miner. Res. 18, 1584–1592 (2003).
Spiller, K. L. et al. Sequential delivery of immunomodulatory cytokines to facilitate the M1-to-M2 transition of macrophages and enhance vascularization of bone scaffolds. Biomaterials 37, 194–207 (2015).
Mountziaris, P. M., Spicer, P. P., Kasper, F. K. & Mikos, A. G. Harnessing and modulating inflammation in strategies for bone regeneration. Tissue Eng. Part B: Rev. 17, 393–402 (2011).
Chan, J. K. et al. Low‐dose TNF augments fracture healing in normal and osteoporotic bone by up‐regulating the innate immune response. EMBO Mol. Med, e201404487 (2015).
Davison, N. L. et al. Liposomal clodronate inhibition of osteoclastogenesis and osteoinduction by submicrostructured beta-tricalcium phosphate. Biomaterials 35, 5088–5097 (2014).
Valenti, M. T., Dalle Carbonare, L. & Mottes, M. Osteogenic Differentiation in Healthy and Pathological Conditions. Int. J. Mol. Sci. 18, 41 (2016).
Wang, Y. W., Xu, D. P., Liu, Y., Zhang, R. & Lu, L. The effect of tumor necrosis factor-α at different concentrations on osteogenetic differentiation of bone marrow mesenchymal stem cells. J. Craniofac. Surg. 26, 2081–2085 (2015).
Wang, Q. et al. Non-genetic engineering of cells for drug delivery and cell-based therapy. Adv. Drug Deliv. Rev. 91, 125–140 (2015).
Peng, H. et al. Emerging nanostructured materials for musculoskeletal tissue engineering. J. Mater. Chem. B 2, 6435–6461 (2014).
Lamboni, L., Gauthier, M., Yang, G. & Wang, Q. Silk sericin: A versatile material for tissue engineering and drug delivery. Biotechnol. Adv. 33, 1855–1867 (2015).
Han, T. T. Y. et al. Natural materials as smart scaffolds for tissue engineering. In: Wang, Q. Smart materials for tissue engineering: fundamental principles (ed. Wang, Q.). 125 (CPI Group, 2016).
Kaliva, M., Chatzinikolaidou, M. & Vamvakaki, M. Applications of smart multifunctional tissue engineering scaffolds. In: Wang, Q. Smart materials for tissue engineering: applications. (ed. Wang, Q.). 1–38 (CPI Group, 2017).
Ahn, J. et al. Topical delivery of 4-hexylresorcinol promotes wound healing via tumor necrosis factor-α suppression. Burns 42, 1534–1541 (2016).
This work was carried out with the support of “Cooperative Research Program for Agriculture Science and Technology Development (Project no. PJ01121404)” Rural Development Administration, Republic of Korea. This research was supported by Korea Mouse Phenotyping Project (NRF-2014M3A9D5A01073658) of the Ministry of Science, ICT and Future Planning through the National Research Foundation.
The authors declare that they have no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Jo, YY., Kweon, H., Kim, DW. et al. Bone regeneration is associated with the concentration of tumour necrosis factor-α induced by sericin released from a silk mat. Sci Rep 7, 15589 (2017). https://doi.org/10.1038/s41598-017-15687-w
Silk fibroin/sericin 3D sponges: The effect of sericin on structural and biological properties of fibroin
International Journal of Biological Macromolecules (2020)
Journal of Biomedical Materials Research Part B: Applied Biomaterials (2020)
Applied Sciences (2020)
Advanced Functional Materials (2020)
Comparison of the Physical Properties and in vivo Bioactivities of Flatwise-Spun Silk Mats and Cocoon-Derived Silk Mats for Guided Bone Regeneration
Macromolecular Research (2020)