A new type of proton acceleration stemming from large-scale gradients, low-density targets, irradiated by an intense near-infrared laser is observed. The produced protons are characterized by high-energies (with a broad spectrum), are emitted in a very directional manner, and the process is associated to relaxed laser (no need for high-contrast) and target (no need for ultra-thin or expensive targets) constraints. As such, this process appears quite effective compared to the standard and commonly used Target Normal Sheath Acceleration technique (TNSA), or more exploratory mechanisms like Radiation Pressure Acceleration (RPA). The data are underpinned by 3D numerical simulations which suggest that in these conditions a Low Density Collisionless Shock Acceleration (LDCSA) mechanism is at play, which combines an initial Collisionless Shock Acceleration (CSA) to a boost procured by a TNSA-like sheath field in the downward density ramp of the target, leading to an overall broad spectrum. Experiments performed at a laser intensity of 1020 W/cm2 show that LDCSA can accelerate, from ~1% critical density, mm-scale targets, up to 5 × 109 protons/MeV/sr/J with energies up to 45(±5) MeV in a collimated (~6° half-angle) manner.
Laser-driven proton acceleration1,2, is a field of intense research due to the numerous fundamental3,4, and applicative5,6,7,8 prospects these beams offer. In comparison with conventional accelerators, laser-driven sources offer significant improvements including a higher laminarity at the source; greater flexibility of generated ions; a high number of particles per shot; compact acceleration. The best laser-driven proton beams are produced nowadays with mid-infrared (0.8–1 µm wavelength), multi-hundred-TW short-pulse (30 fs–1 ps pulse duration) laser systems generating on-target intensities of ~1019–1021 W/cm². These lasers work in standard prepulse laser contrast conditions, i.e., have a ratio of 106–107 between the main pulse and the preceding amplified spontaneous emission (ASE), although some facilities have improved performances, i.e. a ratio of 1010 9. In these standard contrast conditions, multi-MeV, divergent (~20° half-angle10) proton beams can be routinely generated by irradiating thin micrometric solid foils (see refs1,2, and references therein, and see refs11,12,13,14,15, for more recent results). This is commonly achieved using the Target Normal Sheath Acceleration (TNSA) mechanism16 that occurs at the target rear surface1,2.
In TNSA, high-energy electrons (MeV), generated at the front surface of the target by the laser, cross the target and create at the target rear surface an intense sheath17 with a ~TV/m electrostatic field that accelerates protons and ions from hydro-vapor contaminants. TNSA is most efficient when the target rear surface is unheated; otherwise plasma expansion partially shields the surface electrostatic field18,19. In a variant, TNSA can also take place in a partially expanded target having near-critical density20,21. As the laser can propagate fully through such expanded target, fast electron currents generated near the target rear surface form a long-living quasistatic magnetic field there. This field generates an inductive electric field at the rear plasma-vacuum interface that complements TNSA in providing ion acceleration22,23, in what is also called Magnetic Vortex Acceleration mechanism (MVA).
Departing from TNSA, several novel acceleration schemes have been investigated in order to increase the kinetic energy of the ions. The first of these novel schemes, Radiation-Pressure Acceleration (RPA), has been studied extensively theoretically24,25, as well as demonstrated experimentally14,26,27,28. A second acceleration scheme that has been emerging is the so called Break Out Afterburner (BOA) in which an ultra-intense laser can relativistically penetrate through an ultra-thin target during the laser lifetime while the target is being exploded and in which an instability coupling the electrons accelerated by the transmitted laser and the target ions sets up, instability that accelerates the ions29,30. A third mechanism, called Collisionless Shock Acceleration (CSA) mechanism, has been initially proposed by Silva et al.31. There, protons are accelerated by being pushed from the potential barrier located at a shock front generated by the impinging laser. Such collisionless shock wave is generated following the injection into the target, beyond the critical density interface at which the laser is stopped, of laser-accelerated fast electrons. Due to their high energy, the collisional dissipation onto these electrons is negligible32, however collisionless (i.e. mediated by instabilities and plasma waves) processes can provide enough energy dissipation33, such that a density steepening can form as the fast electrons overcome in their propagation the target medium.
For this acceleration mechanism to produce maximum ion energies comparable or above those produced by TNSA, ultra-intense laser pulses are required (I ≥ 3 × 1020 W/cm2)34,35. This mechanism, disentangled from TNSA, has been experimentally demonstrated on a 10 µm wavelength CO2 laser using as target a near-critical H2 gas target36,37. This yielded collimated protons with an energy of up to ~20 MeV.
Recently, another acceleration scheme, namely the Low-Density Collisionless Shock Acceleration mechanism (LDCSA)38, has been highlighted in simulations. In contrary to the “pure” CSA mechanism revealed in the refs30,31, which requires the production of a shock in an overcritical density medium and is difficult to achieve homogeneously for a 1 µm wavelength laser, LDCSA combines shock front acceleration with the volumetric low density acceleration variant of TNSA. We stress that in LDCSA the shock is not generated by the laser, but by the protons propagating downward the density gradient. In details, the ions are first accelerated in the same manner as for the inductive variant of TNSA. Due to the smooth density gradient at the rear side (e.g. the ones exploited in this experiment and which are shown in Fig. 1b), the electric field monotonously decreases with the distance from the high-density zone. Ions in the low-density region therefore experience an electric field lower than ions from the higher density region. As a result, ions from the low-density region can be overtaken by the ions coming from the higher density region leading to the formation of an electrostatic shock front. The ions located ahead of the shock structure can be reflected by it, and accelerated at velocities up to twice the shock velocity. However, in this case the CSA accelerated ions have a broad energy spectrum (as observed here in Fig. 2a); the reason is twofold: first the shock (i.e., the peak of ion density propagating inside the decreasing (low) density ramp that can be clearly seen Fig. 3d (see details below)) is propagating through a non-uniform plasma and therefore its velocity changes in time39 and second the upstream ions ahead of the shock have non-uniform velocities (as illustrated here in Fig. 3a). As a consequence, the ions are reflected by the shock to different velocities, leading to a non-monoenergetic beam.
This mechanism has never been demonstrated experimentally, but simulations have suggested that exploding sub-micrometric foils could offer appropriate plasma conditions for generating high-energy protons through this mechanism40. We stress however that such conditions are different from the ones favourable to BOA acceleration: in ultra-thin foils the transparency regime allowing the transmission of the laser (BOA) plays a critical role in the acceleration mechanism while in LDCSA the laser is fully absorbed due to the very large scale density gradients involved.
In recent experiments using an intense picosecond laser pulse (I~5×1018 W/cm2), we observed that protons, accelerated using targets that were only partially decompressed, exhibit similar maximum proton energy and number compared to proton beams that are produced, in similar laser conditions, from solid targets using TNSA. However, in the then-accessible laser and plasma conditions, no clear demonstration of LDCSA could be obtained41.
In this paper we present evidence that in fully exploded, low-density (1019 cm−3) plasmas irradiated by a high-intensity laser pulse (with an intensity of 1020 W/cm2), protons are accelerated to very high energies (the high-energy cutoff is observed at 45 ± 5 MeV repeatedly over three shots performed in the same conditions) and in a highly directional manner (6° Half Width Half Maximum - HWHM), i.e. to similar energies and in a much narrower beam than what produced by TNSA from solid foils (where we recorded at best 36 ± 2 MeV) using the same laser pulse and laser intensity. Particle-In-Cell simulations performed in the conditions of the experiment suggest that the LDCSA mechanism is at play and effective in such large-scale gradient, low-density plasmas. We also show that the number of accelerated particles produced in these conditions (5×109 protons/MeV/sr/J) is comparable, and even higher for high-energy protons, to those obtained in the TNSA regime. This regime therefore provides an interesting alternative to TNSA, one that does not require strong constraints on the laser temporal contrast (like RPA or BOA), that can exploit under-critical plasmas from inexpensive exploded targets, and that can produce a very directional proton beam.
The experiment was performed using the TITAN laser facility located at the Lawrence Livermore National Laboratory (LLNL), Livermore (USA). Its short-pulse (SP) laser has an energy up to 180 J, a pulse duration of τSP = 700 fs, a wavelength λSP = 1.054 µm, and a 6–8 µm Full Width Half Maximum (FWHM) focal spot containing ~50% of the laser energy, leading to a peak intensity I~1–2×1020 W/cm². The experimental set-up is shown in Fig. 1a. The targets are thin Mylar (PolyEthylene Theraphtalate or PET) foils of different thicknesses ranging from 0.1 to 4 µm; they are irradiated at an angle of 32.5° by the SP. As a basis of comparison, we also irradiated 4, 6, 10, 15 and 25 µm thick solid Au targets in standard TNSA conditions to verify which proton beam parameters could be produced in optimum TNSA conditions.
The thin (0.1 and 0.5 µm thick) Mylar targets are exploded by the ASE of the SP (see Fig. 1a). Note that performing the interaction on lasers having a better temporal contrast (improved e.g. by three orders of magnitude), similar targets can be used while keeping the target at a solid density at the time of the main interaction. However, here such targets are fully exploded.
We also stress that, on a practical point of view, these targets are not only easy, but also inexpensive to manufacture by spin-coating a polymer liquid solution on a disk and then removing by flotation the formed thin Mylar sheet. This is quite different from the targets used so far for RPA studies, which are just a few nm thick and are usually manufactured using complex and expensive micro-lithography techniques.
The ASE that explodes these thin targets has a duration of 2 ns and was measured, during the experimental run, to contain ~10 mJ in energy (at the target chamber center (TCC), i.e. at the location of the SP focus), as measured with fast diodes and a water-switch cell (see Fig. 1c). The calibration of the measurement was made by sending a low-energy, 3 ns duration pulse through the chain and the compressor, and measuring its energy simultaneously at TCC, and on the diode which measures the ASE on every shot (illustrated on Fig. 1c). Overall, the ASE is characterized by an intensity of 1013 W/cm2, a 500 ps rise time, followed by a 1.5 ns plateau, which precedes the peak at the nominal SP intensity (see Fig. 1d). Note that these values are similar to the ones measured in other runs at the same laser facility by other groups42,43.
The protons accelerated from the target rear are analysed with three different diagnostics, as shown in Fig. 1a, D1 and D3 being Thomson Parabolas44 and D2 a magnetic spectrometer (not equipped with electric field plates as D1 and D3). The diagnostic D3 is aligned with the target normal, i.e. at the 0° angle, as shown in Fig. 1a. Proton spectra were readout in an absolute manner45 using TR-type ImagePlates (BAS-TR 2025, Fuji Photo Film Co. Ltd) that were analyzed using a FUJIFILM FLA-7000 reader. The conversion from the units of the Image Plate (Photo-Stimulated-Luminescence - PSL) to protons was made using the absolute calibration given in ref.45 in order to obtain the spectra shown in Fig. 2b. Since D2 did not have the capability to separate various ion species, we verified that the dominant signal, and in particular the high energies recorded at the cutoff where related to protons by using filters. This was done by adding a 2 mm thick Cu filter right on the ImagePlate. Such filters have, according to SRIM maximum range calculations (http://srim.org)46, a cutoff of: 34 MeV for protons, 750 MeV for C (62 MeV/nuc), and 1.05 GeV for O (65 MeV/nuc). Since the signal near the cutoff energy emerging from the filter was similar to the one obtained without the filter, we concluded that the signal was due to protons, otherwise, it would imply even higher energy ions. Additional measurements confirming the proton spectra (see Fig. 2b) and energies (see Fig. 2a) were obtained using RadioChromic Films (RCFs) (MD-55 type)10, located between 30 and 35 mm (depending on the shots) from the target that allowed measuring the spatial distribution of the beam (see Fig. 4).
The expected density profiles of the exploding targets at the end of the ASE irradiation are shown in Fig. 1b. They were obtained using the 1D hydrodynamic ESTHER code47, benchmarked with the CHIC 2D hydrodynamic code using cylindrical geometry48. Here we rely on hydrodynamic simulations, using the well characterized ns-duration, low-intensity ASE of the SP, to infer the target density profiles at the time of the SP irradiation; such procedure has indeed been validated quantitatively many times over, as shown e.g. in Refs41,49,50,51,52, We can readily see that for thicknesses above 2 µm, the target rear density profiles are steep, which is not favourable for LDCSA to take place38. For targets that are thinner, the low-density profiles offer a priori better conditions for LDCSA38. This is represented in the cartoon on top of Fig. 2a.
Figure 2a shows the maximum proton energy recorded by irradiating with the SP these different plasma density profiles. It exhibits two maxima: one in the fully exploded foil regime for the target of 0.1 µm (where the high-energy cutoff is observed at 45 ± 5 MeV repeatedly over three shots performed in the same conditions), and the other for the 2.5 µm thick target (where the high-energy cutoff is observed at 42 ± 5 MeV, also over three shots performed in the same conditions) which is still at solid-density. Note that, as shown in the spectra of Fig. 2b, the uncertainty on the cut-off proton energy, at these energies and for a single shot, induced by the dispersion of the spectrometer, is 3 MeV. Comparatively, using 15 µm thick Au targets, where TNSA is dominant1,2, we obtained a maximum energy of 36 ± 2 MeV (and 30 ± 2 MeV at 16° from the target normal) over four shots performed in the same conditions. This was the best performance we obtained when scanning the various Au target thicknesses mentioned above (4, 6, 10, 15 and 25 µm); this optimum point for a 15 µm target and the recorded 36 ± 2 MeV energy is consistent with previous measurements of TNSA-generated proton beams performed also at TITAN by various other groups, see e.g. refs43,53,54,55.
The angular distribution of the accelerated protons is also quite different for the two maxima shown in Fig. 2a: the 0.1 µm target produces a much more directional proton beam when compared to the 2.5 µm target. The energy in the 16° direction exceeds 40 MeV while the Thomson Parabolas at other angles (0°, 32°) detect significantly lower proton energies (we verified that the high energy recorded in the magnetic spectrometer D2, not equipped with electrodes as D1 and D3, was indeed due to protons, and not other ions, using filters positioned directly onto the detector and able to block heavier ions than protons, as detailed above). This is confirmed by looking at the 2D beam profile recorded in RCFs as shown in Fig. 4: the thick target displays a standard TNSA flat, broad profile10 while the thin target displays a narrow angular proton beam profile (see also the azimuthally angular proton beam profiles in Fig. 4b). We also see in Fig. 2a that the 2.5 µm target results in significantly less pronounced directional acceleration. In both cases (the 2.5 µm target and the exploded 0.1 and 0.5 µm targets), maximum proton energies are not found for normal incidence but recorded by the spectrometer at 16°, as also confirmed by the RCFs shown in Fig. 4 which clearly show that the main proton dose is off-centre in these cases, with the proton beam becoming narrower in angle when going to the exploded foils. Evidently, in the RCFs shown in Fig. 4, we observe that the lateral offset of the proton beam centre in the exploded foil regime is off by 17° with a FWHM of 12°. This is likely due to the impinging ASE from the short-pulse off-axis parabola generating a plasma expansion in the target normal direction. Thus the protons are accelerated within a directional plasma, which tilts the axis of the most energetic protons, as already observed in ref.56. Hence it is expected that the spectrometer D2 will record the highest energy protons corresponding to the centre of the beam and that D1 and D3 see only low energy protons because they sample the far-off wings of the beam.
Interestingly, we also observe in Fig. 2b that the proton spectrum recorded for the 2.5 µm Mylar target is quite similar to that of the 15 µm Au target, in contrast to the spectrum recorded for the 0.1 µm Mylar target where the slope is much less steep. Comparing the proton number from all these targets, all spectra at lower energies reach a maximum proton fluence ≥1012 protons/MeV/sr, i.e. 5×109 protons/MeV/sr/J. This is to be compared to 2 × 1011 protons/MeV/sr/J obtained by Palmer et al.36 and 1.5 × 105 protons/MeV/sr/J obtained by Haberberger et al.37. The latter result is much lower in terms of efficiency, but we note that Fiuza et al.57 suggest that laser filamentation could be responsible for the low charge of the ion bunch in that case. The fact that our fluence is lower than the one obtained by Palmer et al.36 could come from the presence of large scale density gradients in our exploded targets, which were not present in their case as they used a gas jet.
To get an insight into the mechanisms responsible for the generation of high-energy protons in the different plasma density profiles used in the experiment, we performed first principles 3D Particle-In-Cell (PIC) simulations with the fully relativistic and massively parallel code OSIRIS 3.058. In the simulations, pre-formed plasmas composed of Maxwellian electrons having varied temperature in the range 1–900 eV and cold H+ ions (mi/me = 1836), with density profiles described by Fig. 1b, were introduced. We note that the hydrodynamic simulations of the thin foils explosion suggest plasma electron temperatures in the range of a few hundreds of eV, as stated in the caption of Fig. 1. Here, we even tested the influence of a greater range of electron temperatures, i.e. 1–900 eV. We stress that all these simulation lead to very similar results, indicating that the observation of LDCSA accelerated protons to high energies is, in the simulations, largely insensitive to the initial electron temperature, confirming the robustness of the mechanism. Furthermore, simulations performed using a mixture of H+ and C6+ ions did not show noticeable differences. The envelope of the SP was modelled with a Gaussian like polynomial profile given by the formula 10τ3 − 15τ4 + 6τ5, with τ = t/tFWHM and tFWHM = 700 fs and infinite spot size. The considered laser pulse has a wavelength λ = 1 μm and a peak normalized vector potential a0 ~ 9, following the experimental parameters. Since the computations need to be performed over the cm-scale longitudinally, and hence over tens of ps, we had to resort to a small transverse dimension: the 3D simulations used a box size of 104 × 4 × 4 μm3 . The simulation domain was discretized in cubic cells with Δx = 0.08 μm. Periodic boundary conditions were employed for the transverse directions, while absorbing and VPML59 boundary conditions were utilized for particles and fields respectively along the longitudinal direction. In order to model the plasma dynamics correctly, 109 numerical particles and quadratic interpolation have been used. Particles have been pushed for more than 3.5 × 105 time steps with Δt = 0.16 fs = 0.3 ω0 −1, ω0 being the laser frequency, corresponding to 58 ps, for a total time of about 105 CPUh per simulation.
Figure 3a–c shows the phase spaces diagrams for three different target profiles representing the two high-energy proton peaks observed in the experiment (i.e. for the 0.1 and 2.5 µm targets) and an intermediate case (0.5 µm) that resulted in lower protons energies. In particular, in Fig. 3a, we can identify, for the 0.1 µm target, a peak at high-energy in the phase space that is generated at early time during the acceleration process and travels towards the back target surface. This peak in the longitudinal momentum (p x ) corresponds to a shock that propagates within the target and accelerates the ions pushing them from the front surface to the back surface. This strong shock (identified by an arrow) is also visible in Fig. 3d, which shows the ion density and the longitudinal electric field at the same time. We note that in our simulations we did not observe any magnetic field structures. The self-consistent magnetic field travelling in all the directions is completely negligible. Hence, we can rule out that the MVA mechanism is at play here.
Other peaks are observable in Fig. 3d: they are secondary non-linear waves that develop during the process and present corresponding non-linear structures in the phase-space. Note that there is also a developed TNSA peak located towards the rear of the target; it does not display the characteristic linear chirp of TNSA-accelerated protons. Unlike the case of standard TNSA, here the longitudinal electric field decreases towards the end of the target, therefore inner ions are accelerated more than the outer ones and overtake them, creating the hump-like feature. This behaviour is similar to what is described in ref.60 where such features were observed due to charge separation effects. The fact that TNSA adds to LDCSA acceleration for lower-energy protons results in the overall generation of a continuous spectrum. Note also that the high-energy protons are accelerated in the simulation in a narrow angular range (see Fig. 3e), which is well-consistent with the experimental measurements from this 0.1 µm target, as the spectrometers D1 and D3 record much lower proton energies than the magnetic spectrometer D2.
The same weak TNSA develops in the exploding 0.5 µm target, but the strong shock structure is here noticeably absent (see Fig. 3b). This is well consistent with the experimental results in which the protons are of lower energy for the case of the 0.5 µm target. For the thicker (2.5 µm) target (Fig. 3c) we see a phase space, typical of the TNSA regime, in which the longitudinal momentum increases when going towards the target rear surface since the acceleration occurs mostly there. Note also that the protons accelerated in the 2.5 µm thick target are emitted in a wide angular region (see Fig. 3f), which is again well-consistent with the experimental measurements from the same thick target, as D1 and D2 record very similar spectra in this case. For even thicker targets, i.e. for thicknesses above 4 µm, the target is not sufficiently decompressed and therefore part of the laser-energy is reflected and not absorbed by the target and transferred into the acceleration process. In summary, the proton cut-off energy versus target thickness presents a maximum for very thin targets, where LDCSA is the dominant acceleration mechanism. It then decreases to a minimum when LDCSA strongly competes with TNSA. Finally, when TNSA becomes the dominant mechanism of the acceleration, the proton energy increases again till the second maximum. The angular distribution is, also, well reproduced when compared to the experimental results. All this shows that the acceleration processes highlighted by the PIC simulations confirm the intuitive picture depicted above Fig. 2a of the transition of a predominance between LDCSA to TNSA as the plasma density profile evolves from a low-density, expanded one, to a profile having a solid-density with a sharp rear surface gradient.
Finally, we have investigated and compared the spatial profiles of the proton beam generated by the exploding target and solid Au foils. The assessment of the beam homogeneity has been done by calculating the mean dose of the beam imprint in the RCF and then computing the variation of the dose with respect to that mean dose, similarly as discussed in ref.61. Figure 4 shows the different values of relative dose variation for various thicknesses of targets (Au and Mylar), either in the TNSA or LDCSA regimes. One can see that the thinner the targets, the less smooth the proton profile is, but also that the proton beam quality still compares to what can be obtained in the TNSA regime (see also similar measurements in the TNSA regime in ref.61).
The next steps are to use over-critical density gas jets62,63, which are readily available and will offer potential for high-repetition rate use, eliminating the need for solid target replacement. With existing mid-infrared (0.8–1 µm wavelength) lasers developing intensities in the range of 1021 W/cm2, and with newer facilities that will offer64 even higher on-target intensities, simulations have shown that the 100 MeV barrier could be reached38,65. This shows that LDCSA holds promise for accelerating ions to high energies and in a collimated manner, while at the same time eliminating the stringent constraints imposed both on targets and laser conditions compared to other novel acceleration schemes (e.g. RPA).
Daido, H., Nishiuchi, M. & Pirozhkov, A. S. Review of laser-driven ion sources and their applications. Rep. Prog. Phys. 75, 056401 (2012).
Macchi, A., Borghesi, M. & Passoni, M. Ion acceleration by superintense laser-plasma interaction. Reviews of Modern Physics 85, 751–793 (2013).
Higginson, D. P. et al. A Novel Platform to Study Magnetized High-Velocity Collisionless Shocks. High Energy Density Phys. 17, 190–197 (2015).
Mancic, A. et al. Isochoric heating of solids by laser-accelerated protons: characterization and self-consistent hydrodynamic modelling. High Energy Dens. Phys. 6, 21 (2010).
Bulanov, S. V. et al. Oncological hadrontherapy with laser ion accelerators. Phys. Rev. A 299, 240 (2002).
Roth, M. et al. Fast Ignition by Intense Laser-Accelerated Proton Beams. Phys. Rev. Lett. 86, 436 (2001).
Antici, P. et al. A compact post-acceleration scheme for laser generated protons. Phys. Plasmas 18, 073103 (2011).
Roth, M. et al. Bright Laser-Driven Neutron Source Based on the Relativistic Transparency of Solids. Phys. Rev. Lett. 110, 044802 (2013).
Wagner, F. et al. Accelerating ions with high-energy short laser pulses from submicrometer targets. High power laser science and engineering 4, e45 (2016).
Bolton, P. R. et al. Instrumentation for diagnostics and control of laser-accelerated proton (ion) beams. Physica Medica 30, 255–270 (2014).
Ogura, K. et al. Proton acceleration to 40 MeV using a high intensity, high contrast optical parametric chirped-pulse amplification/Ti:sapphire hybrid laser system. Optics Letters 37, 2868–2870 (2012).
Zigler, A. et al. Enhanced proton acceleration by an ultrashort laser interaction with structured dynamic plasma targets. Phys. Rev. Lett. 110, 215004 (2013).
Fourmeaux, S. et al. Investigation of laser-driven proton acceleration using ultra-short, ultra-intense laser pulses. Phys. Plasmas 20, 013110 (2013).
Dollar, F. et al. High contrast ion acceleration at intensities exceeding 1021 Wcm−2. Phys. Plasmas 20, 056703 (2013).
Wagner, F. et al. Maximum Proton Energy above 85 MeV from the Relativistic Interaction of Laser Pulses with Micrometer Thick CH2 Targets. Phys. Rev. Lett. 116, 205002 (2016).
Wilks, S. C. et al. Energetic proton generation in ultra-intense laser–solid interactions. Phys. Plasmas 8, 242 (2001).
Antici, P. et al. Hot and cold electron dynamics following high-intensity laser matter interaction. Phys. Rev. Lett. 101, 105004 (2008).
Fuchs, J. et al. Comparative spectra and efficiencies of ions laser-accelerated forward from the front and rear surfaces of thin solid foils. Phys. Plasmas 14, 053105 (2007).
Lévy, A. et al. Effect of a nanometer scale plasma on laser-accelerated ion beams. New J. Phys. 11, 093036 (2009).
Matsukado, K. et al. Energetic Protons from a Few-Micron Metallic Foil Evaporated by an Intense Laser Pulse. Phys. Rev. Lett. 91, 215001 (2003).
Yogo, A. et al. Laser ion acceleration via control of the near-critical density target. Phys. Rev. E 77, 016401 (2008).
Bulanov, S. S. et al. Generation of GeV protons from 1 PW laser interaction with near critical density targets. Phys. Plasmas 17, 043105 (2010).
Nakamura, T. et al. High-Energy Ions from Near-Critical Density Plasmas via Magnetic Vortex Acceleration. Phys. Rev. Lett. 105, 135002 (2010).
Macchi, A. et al. Laser Acceleration of Ion Bunches at the Front Surface of Overdense Plasmas. Phys. Rev. Lett. 94, 165003 (2005).
Quiao, B. et al. Stable GeV Ion-Beam Acceleration from Thin Foils by Circularly Polarized Laser Pulses. Phys. Rev. Lett. 102, 145002 (2009).
Henig, A. et al. Radiation-Pressure Acceleration of Ion Beams Driven by Circularly Polarized Laser Pulses. Phys. Rev. Lett. 103, 245003 (2009).
Kar, S. et al. Ion Acceleration in Multispecies Targets Driven by Intense Laser Radiation Pressure. Phys. Rev. Lett. 109, 185006 (2012).
Kim, I. J. et al. Transition of Proton Energy Scaling Using an Ultrathin Target Irradiated by Linearly Polarized Femtosecond Laser Pulses. Phys. Rev. Lett. 111, 165003 (2013).
Yin, L. et al. Three-dimensional dynamics of breakout afterburner ion acceleration using high-contrast short-pulse laser and nanoscale targets. Phys. Rev. Lett. 107, 045003 (2011).
Palaniyappan, S. et al. Efficient quasi-monoenergetic ion beams from laser-driven relativistic plasmas. Nat Commun. 6, 10170 (2015).
Silva, L. O. et al. Proton Shock Acceleration in Laser-Plasma Interactions. Phys. Rev. Lett. 92, 015002 (2004).
Atzeni, S. and Meyer-ter-Vehn, J. The Physics of Inertial Fusion: BeamPlasma Interaction, Hydrodynamics, Hot Dense Matter (Oxford University Press, 2004).
Moiseev, S. S. & Sagdeev, R. Z. Collisionless shock waves in a plasma in a weak magnetic field. J. Nucl. Energy, Part C Plasma Phys. 5, 43 (1963).
d’Humières, E. et al. Proton acceleration mechanisms in high-intensity laser interaction with thin foils. Phys. Plasmas 12, 062704 (2005).
Fiuza, F. et al. Laser-Driven Shock Acceleration of Monoenergetic Ion Beams. Phys. Rev. Lett. 109, 215001 (2012).
Palmer, C. et al. Monoenergetic Proton Beams Accelerated by a Radiation Pressure Driven Shock. Phys. Rev. Lett. 106, 014801 (2011).
Haberberger, D. et al. Collisionless shocks in laser-produced plasma generate monoenergetic high-energy proton beams. Nature Phys. 8, 95 (2012).
d’Humières, E. et al. Investigation of laser ion acceleration in low-density targets using exploded foils. Plasma Phys. Control. Fusion 55, 124025 (2013).
Boella, E. et al. ArXiv e-prints, ArXiv:1709.04098 (2017).
Stockem Novo, A., Kaluza, M. C., Fonseca, R. A. & Silva, L. O. Optimizing laser-driven proton acceleration from overdense targets. Sci. Rep. 6, 29402 (2016).
Gauthier, M. et al. Investigation of longitudinal proton acceleration in exploded targets irradiated by intense short-pulse laser. Phys. Plasmas 21, 013102 (2014).
Park, J., Baldis, H. A. & Chen, H. The implementation and data analysis of an interferometer for intense short pulse laser experiments. High Power Laser Science and Engineering 4, e26 (2016).
Hey, D. S. et al. Laser-accelerated proton conversion efficiency thickness scaling. Phys. of Plasmas 16, 123108 (2009).
Thomson, J. J. Cathode Rays. Philosophical Magazine 44, 293 (1897).
Mančić, A., Fuchs, J., Antici, P., Gaillard, S. A. & Audebert, P. Absolute calibration of photostimulable image plate detectors used as (0.5–20 MeV) high-energy proton detectors. Rev. Sci. Intrum. 79, 073301 (2008).
Ziegler, J. F., Biersack, J. P. and Littmark. U. The Stopping and Range of Ions in Matter. Pergamon, New York (1985).
Colombier, J. P. et al. Optimized energy coupling at ultrafast laser-irradiated metal surfaces by tailoring intensity envelopes: Consequences for material removal from Al samples. Phys. Rev. B 74, 224106 (2006).
Breil, J., Galera, S. & Maire, P. H. Multi-material ALE computation in inertial confinement fusion code CHIC. Comput. Fluids 46, 161 (2011).
Borghesi, M. et al. Characterization of laser plasmas for interaction studies: Progress in time-resolved density mapping. Phys. Rev. E 54, 6769 (1996).
Willi, O., Evans, R. G. & Raven, A. Time resolved density profiles of laserheated plasmas. Physics of Fluids 23, 2061 (1980).
Börner, M. et al. Development of a Nomarski-type multi-frame interferometer as a time and space resolving diagnostics for the free electron density of laser-generated plasma. Review of Scientific Instruments 83, 043501 (2012).
Aliverdiev, A. et al. Hydrodynamics of laser-produced plasma corona measured by optical interferometry. Plasma Phys. Control. Fusion 50, 105013 (2008).
Higginson, D. P. et al. Laser generated neutron source for neutron resonance spectroscopy. Phys. of Plasmas 17, 100701 (2010).
LePape, S. et al. Proton radiography of magnetic fields in a laser-produced plasma. High Energy Density Physics 6, 365 (2010).
Barberio, M., Veltri, S., Scisciò, M. & Antici, P. Laser-Accelerated Proton Beams as Diagnostics for Cultural Heritage. Sci. Rep. 7, 40415 (2017).
Lindau, F. et al. Laser-accelerated protons with energy dependent beam direction. Phys. Rev. Lett. 95, 175002 (2005).
Fiuza, F., Stockem, A., Boella, E., Fonseca, R. A. & Silva, L. O. Ion acceleration from laser-driven electrostatic shocks. Phys. of Plasmas 20, 056304 (2013).
Fonseca, R. A. et al. Osiris: a three- dimensional fully relativistic particle in cell code for modelling plasma based accelerators. Lecture Notes in Computer Science 2331, 342 (2002).
Vay, J.-L. A new absorbing layer boundary condition for the wave equation. J. Comput. Phys. 165, 511 (2000).
Mora, P. Collisionless expansion of a Gaussian plasma into vacuum. Physics of Plasmas 12, 112102 (2005).
Quinn, M. N. et al. On the investigation of fast electron beam filamentation in laser-irradiated solid targets using multi-MeV proton emission. Plasma Phys. Control. Fusion 53, 124012 (2011).
Chen, S. N. et al. Proton stopping power measurements using high intensity short pulse lasers produced proton beams. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 740, 105–106 (2014).
Sylla, F. et al. Development and characterization of very dense submillimetric gas jets for laser-plasma interaction. Review of Scientific Instruments 83, 033507 (2012).
Danson, C., Hillier, D., Hopps, N. & Neely, D. Petawatt class lasers worldwide. High Power Laser Science and Engineering 3, e3 (2015).
d’Humières, E., Brantov, A., Bychenkov, V., Yu. & Tikhonchuk, V. T. Optimization of laser-target interaction for proton acceleration. Phys. Plasmas 20, 023103 (2013).
The authors thank the staff of the Titan Laser and the Jupiter Laser facility for their support during the experimental preparation and execution. We thank R. C. Cauble for discussions, P. Combis of CEA for the use of Esther, and G. Revet for discussion on the hydrodynamic simulations. This work was partly done within the LABEX Plas@Par project and supported by Grant No. 11‐IDEX‐0004‐02 and ANR-17-CE30-0026 PiNNaCLE grant from Agence Nationale de la Recherche (France). It has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no 654148 Laserlab-Europe, and was supported in part by the Ministry of Education and Science of the Russian Federation under Contract No. 14.Z50.31.0007. The use of the Jupiter Laser Facility was supported by the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. This work is supported by FRQNT (nouveaux chercheurs, Grant No. 174726, Team Grant 2016-PR-189974), NSERC Discovery Grant (Grant No. 435416), ComputeCanada (Job: pve-323-ac, P. Antici). E.B. and L.O.S. were supported by the European Research Council (ERC-2010-AdG grant no. 267841). Simulations were performed on the Accelerates cluster at IST, on the ComputeCanada cluster, on the supercomputers Juqueen (Julich supercomputing center, Germany) and Fermi (Cineca, Italy), through Prace allocations. O.Willi acknowledges the DFG Programmes GRK 1203 and SFB/TR18.
The authors declare that they have no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Antici, P., Boella, E., Chen, S.N. et al. Acceleration of collimated 45 MeV protons by collisionless shocks driven in low-density, large-scale gradient plasmas by a 1020 W/cm2, 1 µm laser. Sci Rep 7, 16463 (2017). https://doi.org/10.1038/s41598-017-15449-8
High Power Laser Science and Engineering (2020)
High Energy Density Physics (2020)
Physics of Plasmas (2020)
Plasma Physics and Controlled Fusion (2019)
Enhancement of collisionless shock ion acceleration by electrostatic ion two-stream instability in the upstream plasma
Physical Review Accelerators and Beams (2019)