Extracting horizontal mandibular 3rd molars face considerable difficulty due to the large bone and adjacent tooth resistances. This study aims at evaluating the effectiveness of a novel method-mesiolingual root rotation to extract wisdom teeth of this type. In this study, 73 horizontal teeth extracted using piezosurgery were reviewed and classified based on impaction depth: position I, II, III refers to the highest portion of the crown on a level with upper 1/3, middle 1/3, lower 1/3 of the 2rd molar’s root. Based on the surgical simulations on their 3D CBCT reconstructions, traditional method(crown distal rotation) and novel method(root mesiolingual rotation) are applied. 79.17% of teeth in position I and 57.89% of teeth in position II were designed using traditional method, 83.33% teeth in position III were designed using the novel method(p < 0.05). The surgeries were performed according to the designs. Two cases in position II using traditional method were found temporary inferior alveolar nerve(IAN) injury; while only one case in position III using novel method got temporary IAN and lingual nerve injury. Our study suggested that root mesiolingual rotation is an effective method to extract the horizontal mandibular 3rd molars, especially the deep impacted ones.
In relation to the long axis of the adjacent tooth, the wisdom teeth could be classified based on the impacted angulation: distal-angular, vertical, mesio-angular, horizontal, as well as inverted impaction. Among them, horizontal mandibular third molars are usually deep impacted and are most difficult to extract due to the following features: ①large coronal bone resistance; ②large adjacent tooth resistance; ③the proximity to inferior alveolar canal(IAC); ④mandible fracture risk due to the deep impaction. Therefore, any unplanned surgery for horizontally impacted tooth will easily lead to excessive surgical trauma and inferior alveolar nerve (IAN) injury.
To avoid the resistance of the crown (large bone and adjacent tooth resistance), tooth lingual rotation is introduced in horizontal mandibular third molar extraction. In our previous study1, 87.3% of all impacted mandibular third molars were measured in lingual positions by evaluating buccal-lingual alveolar bone thickness, which indicates the valid of lingual split technique. In our another study2, tooth rotated in horizontal direction(root mesiolingual rotation in particular) with the application of piezosurgery3,4,5, has the potential of notably avoiding almost all adjacent tooth resistance and bone resistance.
Considering the remarkable characteristics of less trauma and fewer complications, the novel method of mesiolingual root rotation is supposed to be introduced in extraction of horizontal mandibular 3rd molars. However, though there are some studies mentioned lingual split technique6,7,8,9,10, none of them has described the details of lingual root rotation according to our knowledge. Several problems as follows are to be answered: ①Is there a comprehensive evaluation for the deep impacted mandibular 3rd molar? With the application of three-dimensional(3D) reconstruction in oral and maxillofacial surgical design11,12, is it possible to introduce the technique in this study to guide the surgical procedure? ②What is the key technique in the mesiolingual root rotation? ③Are there any complications after surgery using the novel method? In order to solve those problems, we designed this prospectieve study. By reviewing horizontal mandibular third molar extractions, the study aims at presenting the design procedure and novel surgical method, as well as its clinical value.
Material and Methods
This is a prospectieve study. This study followed the Declaration of Helsinki on medical protocol and ethics and the regional Ethical Review Board of Shanghai Ninth People’s Hospital approved the study. Each patient was informed about surgical purpose, surgical protocol, recovery period, possible complications and signed a consent form.
From January 1st 2015 to May 31th 2016, a consecutive group of 171 patients who had piezosurgery extraction of 243 complicated mandibular third molars were reviewed. After a detailed medical and dental history were gained, OPG and cone-beam computed tomography (CBCT) of the surgical site were taken in all patients. All teeth were classified and evaluated based on the Pell&Gregory classification13,14 and the proximity to the mandibular canals15,16,17.
The inclusion criteria is horizontal mandibular 3rd molars. The definition of horizontal impaction was based on the angulation of mandibular 3rd molar axis to the mandibular 2nd molar shown in orthopantomogram (OPG). In total, 56 patients with 73 teeth were included.
Teeth position classification
Based on the relative impaction depth in the bone, the included mandibular third molars were classified into three types (Fig. 1):
Position I: The highest portion of the tooth crown is on a level with/above the upper 1/3 of the 2rd molar’s root (Fig. 1A,B).
Position II: The highest portion of the tooth crown is on a level with the middle 1/3 of the 2rd molar’s root (Fig. 1C,D).
Position III: The highest portion of the tooth crown is on a level with/below the lower 1/3 of the 2rd molar’s root (Fig. 1E,F).
Surgical design and simulation
The surgical design and simulation in each case includes the following steps: (1)transferring CBCT data into mimics 15.0 (Materialize Co, Leuven, Belgium) for 3D reconstruction. (2)segmenting out teeth, alveolar bone and inferior alveolar nerve. (3)simulating osteotomy and tooth rotation on the 3D model12 (Fig. 2).
According to the surgical simulation results, all the extraction simulations could be concluded into two types as follows: ①traditional method: remove the occlusal bone, then rotate the crown in mesio-distal direction with/without sectioning; ②novel method: remove the occlusal and lingual bone, then rotate the root in mesiolingual direction to make the whole tooth luxated.
Under local anesthesia with 2% lidocaine, all patients were operated by one surgeon(Yang C) with 30-year clinical experience. After a full thickness flap elevated, a piezosurgical device (Silfradent, Italy) was implemented for bone removal. A curved periosteal elevator was placed on the lingual bone to improve surgical field exposure, protect the lingual nerve, as well as prevent the tooth or bone pieces slipping into the lingual soft tissue space. The extraction procedures were in accordance with the design.
Piezosurgery was applied for bone removal in all the extractions. In the novel extraction, the bone resistance around the root was precisely released with piezosurgery and then the root rotate mesiolingually with the elevator located on its buccal side (Fig. 3). After extraction, the sockets were closed by 4/0 absorbable silk (Covidien, US) sutures.
Outcome variables: success rate, operating time (from the first incision to the last suture), recovery (pain, restricted mouth opening, swelling) and the incidence of major complications. Patients were recalled 1 week, 1 month, 3 month, 6 month, 1 year after surgery.
Pain level was measured with Visual analog scale (VAS) method18,19. Mouth opening was measured as the inter-incisal distance at maximum mouth opening10,19. Swelling was measured with standard caliper from the lingual aspect of mandibular 1st molar crown to the tangent of the cheek skin20.
Major severe complications include 2nd molar injury, lingual nerve(LN) and inferior alveolar nerve(IAN) damage, mandibular fracture, temporomandibular joint injury21. Sensory deficit lasting longer than 6 months is defined as permanent.
Data were collected in a spreadsheet (Excel; Microsoft Inc, Redmond, WA) and analyzed using a statistical software package SAS 8.0 (SAS institude, USA). Chi-square test and Fisher’s Exact Test are used to analyze the data, a value of p ≤ 0.05 was considered statistically significant.
In this study, there are 73 teeth in 57 patients included. Of these, 35 were female (44 teeth), and 22 were male (28 teeth). Their ages ranged from 20 to 48 years (average, 31 years). Among them, 48 teeth were in position I, with 38 of them designed to be extracted using traditional method, and 10 designed using root mesio-lingual rotation; 19 teeth were in position II, with 11 designed using traditional method, and 8 designed to rotate the root mesio-lingually; 6 teeth were in position III, with 5 designed root rotation (Table 1).
The success rate of all extractions was 100%. The average operating-time was 15.6 min (p < 0.05). The VAS score, mouth-opening, swelling measurement in patients were 0.35 ± 0.48, 35.1 mm ± 3.7 mm, 2.39 cm ± 0.22 cm one week after surgery (p > 0.05).
Two cases in position II using traditional method and one case in position III using novel method were found temporary lower lip hypesthesia, indicating IAN injury, and recovered in 7 weeks after surgery. Among them, the case using novel method combined with temporary half tongue hypesthesia, indicating LN injury, and recovered in 12 weeks (Table 2). None of other major complications was recorded.
Horizontal mandibular 3rd molars are usually deep impacted with large bone resistance, leading to the difficulty of extractions as well as the risk of IAN injury. Besides, they occasionally locate below the cervical lines of the mandibular 2nd molars, producing the risk of adjacent teeth trauma. Therefore, extracting mandibular 3rd molars of this type is quite a challenge. In order to solve this problem, mesiolingual rotation is introduced1,22,23. However, neither the detailed application, nor the clinical effect has been discussed in literature. The purpose of this study was to introduce root mesiolingual rotation as a novel method to extract horizontal mandibular 3rd molars. In this study, the novel method was implemented with piezosurgery and achieved a satisfying outcome—acceptable operating time, controlled recovery period with infrequent complications.
For mandibular 3rd molars, OPG could be used to make general classifications, helping the surgical difficulty evaluation. While CBCT could show more detailed information in 3 dimensions, which had the value in surgical guidance16,23,24. In addition, the data of CBCT could be transferred for reconstruction and surgical simulation with the segment tools. Considering the strengths of the two radiological examinations, for complicated mandibular 3rd molars (e.g. penetrate the mandibular canals, impact deeply in the bone, root curve or hypertrophy), implementation of both OPG and CBCT contributes to a better evaluation5,17. In this study, the 3D reconstruction of CBCT and surgical simulation based on it have been proven valid in evaluation and surgical design. The shortcomings of this computer technique are time-consuming and the requirement of thin slice interval (≤0.1 mm). The data with thick slice interval are not suitable to reconstruct smooth and precise 3D model, which will produce large deviations in surgical simulation.
Invasive extraction and less bone removal are the current notion for mandibular 3rd molar extraction. Therefore, the traditional method involving the steps of crown bone removal, tooth sectioning and distal crown rotation is recommended to extract wisdom teeth. However, for horizontally impacted teeth, especially for the teeth deep impacted, the traditional extraction method leads to narrow surgical site exposure, large bone removal, in additional to higher risks of complications such as inferior alveolar nerve injury and bone fracture. In this study, we classified deep impacted teeth into 3 categories based on the impaction depth. It shows that the deeper impaction, the more frequency of choosing root mesio-lingual rotation. The reasons of choosing root rotation instead of the crown are listed as follows: ① the bone resistance around the crown is much larger than that around the root; ② the deep impacted crown always locates in closer proximity to the mandibular canal than the root; ③ the deep crown contact the adjacent tooth closely, and the root rotation could avoid the resistance.
With the application of piezosurgery, the goal of the precise and easy bone removal in alveolar surgeries is achieved. Compared with the drill device, piezosurgery has distinguished characteristics including minimally invasive, precise osteotomy, less thermal damage, as well as less soft tissue injury4,20,25. In the method of mesio-lingual root rotation, the key technique is the release of the bone resistance around the root. The procedure is performed by piezosurgery as follows: ①firstly remove the occlusal bone to the root level precisely5; ②then carefully make the osteotomy line from the root area to the bone lingual surface (Fig. 3). With the removal of the occlusal and lingual bone, the root could rotate in mesiolingual direction to make the whole tooth luxated by applying an elevator at its buccal side.
The evaluations during the extractions include the success rate and operating time. In this study, success rate was 100%, indicating the effectiveness of the two methods. The average operating time of all the extractions was adequate compared with the previous studies18,19,26,27. The post-operative reactions28 (pain, limited mouth-opening, swelling) are mild and acceptable compared with other studies of mandibular third molar extractions10,18,19,20. In the three cases of temporary IAN injury, all of the teeth located deeply and contacted or penetrated to the canals, which may be the cause of nerve injury29. Some studies mentioned that lingual split technique would increase the risk of lingual nerve injury9,30,31. In this study, a proper protection of lingual soft tissue was implemented, and only one case of temporary lingual nerve injury occurred, which demonstrated that the lingual nerve injury risk could be well controlled. The occurrence may due to the deep impaction of the tooth (below the lower 1/3 of the adjacent tooth root).
It is suggested that root mesiolingual rotation is a valid method, especially for extracting deep horizontal mandibular 3rd molars. However, in extracting teeth with wide root furcation, this method has its limitation because of the large bone resistance around the roots. Therefore, tooth sectioning method is recommended in this situation. A potential limitation of this study is the possibility of referral bias, due to its retrospective character. Retrospective randomized controlled trial is suggested to be designed and implemented to analyze the effectiveness of root mesiolingual rotation.
According to the results of our study, root mesiolingual rotation is an effective method in extractions of horizontal mandibular 3rd molars, especially the deep impacted ones. The 3D surgical simulation based on CBCT reconstruction is valid in surgical design, while precise root bone resistance release using piezosurgery is the key procedure during extraction.
Ge, J. et al. Variations in the buccal-lingual alveolar bone thickness of impacted mandibular third molar: our classification and treatment perspectives. Sci. Rep 6, 16375 (2016).
Ye, Z. X., Yang, C. & Ge, J. Adjacent tooth trauma in complicated mandibular third molar surgery: Risk degree classification and digital surgical simulation. Sci. Rep 6, 39126 (2016).
Jiang, Q. et al. Piezoelectric Versus Conventional Rotary Techniques for Impacted Third Molar Extraction: A Meta-analysis of Randomized Controlled Trials. Medicine 94, e1685 (2015).
Mantovani, E. et al. A split-mouth randomized clinical trial to evaluate the performance of piezosurgery compared with traditional technique in lower wisdom tooth removal. J Oral Maxillofac Surg 72, 1890–1897 (2014).
Ge, J. et al. Four osteotomy methods with piezosurgery to remove complicated mandibular third molars: a retrospective study. J Oral Maxillofac Surg 72, 2126–2133 (2014).
Ward, T. G. The split bone technique for removal of lower third molars. Br Dent J 101, 297–304 (1956).
Yeh, C. J. Simplified split-bone technique for removal of impacted mandibular third molars. Int J Oral Maxillofac Surg 24, 348–350 (1995).
Lewis, J. E. Modified lingual split technique for extraction of impacted mandibular third molars. J Oral Surg 38, 578–583 (1980).
Pichler, J. W. & Beirne, O. R. Lingual flap retraction and prevention of lingual nerve damage associated with third molar surgery: a systematic review of the literature. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 91, 395–401 (2001).
Ge, J. et al. Piezosurgery for the Lingual Split Technique in Lingual Positioned Impacted Mandibular Third Molar Removal. Medicine 95, e3192 (2016).
Guo, Y. et al. Use of Computer-Assisted Navigation in the Retrieval of Accidentally Displaced Third Molars. J Oral Maxillofac Surg 74, 889–894 (2016).
Ye, Z. X. et al. A novel approach to neoplasms medial to the condyle: a condylectomy with anterior displacement of the condyle. Int J Oral Maxillofac Surg 45, 427–432 (2016).
Juodzbalys, G. & Daugela, P. Mandibular third molar impaction: review of literature and a proposal of a classification. J Oral Maxillofac Res 4, e1 (2013).
Carter, K. & Worthingto, S. Predictors of Third Molar Impaction: A Systematic Review and Meta-analysis. J Dent Res 95, 267–276 (2016).
Schneider, T. et al. Variations in the anatomical positioning of impacted mandibular wisdom teeth and their practical implications. Swiss Dent J 124, 520–538 (2014).
Peker, I. et al. Panoramic radiography and cone-beam computed tomography findings in preoperative examination of impacted mandibular third molars. BMC oral health 14, 71 (2014).
Ye, Z. X., Yang, C. & Abdelrehem, A. Prediction of inferior alveolar nerve injury in complicated mandibular wisdom teeth extractions: a new classification system. Int J Clin Exp Med 9, 3729–3734 (2016).
Barone, A. et al. A randomized clinical evaluation of ultrasound bone surgery versus traditional rotary instruments in lower third molar extraction. J Oral Maxillofac Surg 68, 330–336 (2010).
Goyal, M. et al. Comparative evaluation of surgical outcome after removal of impacted mandibular third molars using a Piezotome or a conventional handpiece: a prospective study. Br J Oral Maxillofac Surg 50, 556–561 (2012).
Piersanti, L. et al. Piezosurgery or conventional rotatory instruments for inferior third molar extractions? J Oral Maxillofac Surg 72, 1647–1652 (2014).
Menon, S. et al. Correlation of Third Molar Status with Incidence of Condylar and Angle Fractures. Craniomaxillofac Trauma Reconstr 9, 224–228 (2016).
Emes, Y. et al. Measurement of the lingual position of the lower third molar roots using cone-beam computed tomography. J Oral Maxillofac Surg 73, 13–17 (2015).
Momin, M. A. et al. Correlation of mandibular impacted tooth and bone morphology determined by cone beam computed topography on a premise of third molar operation. Surg Radiol Anat 35, 311–318 (2013).
Watanabe, H. et al. Mandible size and morphology determined with CT on a premise of dental implant operation. Surg Radiol Anat 32, 343–349 (2010).
Bilginaylar, K. & Uyanik, L. O. Evaluation of the effects of platelet-rich fibrin and piezosurgery on outcomes after removal of impacted mandibular third molars. Br J Oral Maxillofac Surg 54, 629–633 (2016).
Sortino, F., Pedulla, E. & Masoli, V. The piezoelectric and rotatory osteotomy technique in impacted third molar surgery: comparison of postoperative recovery. J Oral Maxillofac Surg 66, 2444–2448 (2008).
Rullo, R. et al. Piezoelectric device vs.conventional rotative instruments in impacted third molar surgery: relationships between surgical difficulty and postoperative pain with histological evaluations. J Craniomaxillofac Surg 41, e33–e38 (2013).
Silva de Oliveira, J. C., Grossi de Oliveira, G. A. & Bassi, A. P. Comparative Assessment of the Effect of Ibuprofen and Etodolac on Edema, Trismus, and Pain in Lower Third Molar Surgery: A Randomized Clinical Trial. J Oral Maxillofac Surg 74, 1524–1530 (2016).
Nguyen, E., Grubor, D. & Chandu, A. Risk factors for permanent injury of inferior alveolar and lingual nerves during third molar surgery. J Oral Maxillofac Surg 72, 2394–2401 (2014).
Miloro, M. et al. Assessment of the lingual nerve in the third molar region using magnetic resonance imaging. J Oral Maxillofac Surg 55, 134–137 (1997).
Leung, Y. Y. & Cheung, L. K. Risk factors of neurosensory deficits in lower third molar surgery: an literature review of prospective studies. Int J Oral Maxillofac Surg 40, 1–10 (2011).
The authors declare that they have no competing interests.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Ye, Z., Yang, C. Mesiolingual root rotation for horizontal mandibular third molar extraction: position classification and surgical simulation. Sci Rep 7, 14405 (2017). https://doi.org/10.1038/s41598-017-14914-8