Generation of megahertz-band spin currents using nonlinear spin pumping

Abstract

Spin pumping enables the generation of d.c. and gigahertz-band (GHz-band) voltages from an applied microwave via magnetization dynamics when combined with inverse spin Hall effects. However, generating such voltages in the in-between frequency region, or the megahertz (MHz) band, has been difficult since ferromagnetic resonance usually occurs in the GHz band. Here we show that in spite of GHz-band microwaves applied, MHz-band voltages can be generated by spin pumping with use of nonlinear magnetization dynamics in Y3Fe5O12. The mechanism is ascribed to the MHz-band oscillation of the amplitude of the magnetization precession, which is projected onto a rectified voltage component via spin pumping. The present finding could be useful for frequency down-conversion thanks to the simple and durable structure, continuous-wave operation, and the tunability of an output frequency with low magnetic fields.

Introduction

Spin current is a flow of spin angular momentum of electrons in solids without accompanying charge current1, which has attracted much attention in spintronics2, 3. Since spin current can be generated also in magnetic insulators, insulator-based spintronic phenomena, such as spin-torque and spin Seebeck effects, have been explored4,5,6,7,8,9.

Among various spin-current generation methods, spin pumping is a versatile way to generate spin current in a ferromagnetic material (FM)/nonmagnetic metal (NM) structure10, 11. When steady magnetization precession dynamics is excited in a FM, a d.c. spin current is injected from the FM into the NM through the interface, a phenomenon called spin pumping (Fig. 1a). The magnitude of spin current is proportional to the square of the magnetization-precession amplitude1. By using a NM with strong spin-orbit interaction, such as platinum (Pt), the spin current injected in the NM is converted into voltage via the inverse spin Hall effect12, 13 (ISHE) caused by the spin-orbit interaction14,15,16,17,18,19,20,21.

Figure 1
figure1

Concept of generation of MHz-band spin currents by nonlinear spin pumping. (a,b) Spin pumping at the interface between ferromagnetic material (FM) and nonmagnetic metal (NM) in a linear regime (a) and an auto-oscillation (AO) regime (b) of magnetization dynamics. When the power of an incident microwave is below the threshold value of AO (a), the precessing magnetization, M(t), injects a d.c. spin current, j s, into the NM via the spin pumping effect, which results in the d.c. electromotive force E ISHE via the inverse spin Hall effect (ISHE). When the microwave power exceeds the threshold value of AO (b), the solid angle subtended by M(t) exhibits AO. As a result, a MHz-band spin current, j s(t), arises from spin pumping, which is finally converted into pulsating electromotive force, E ISHE(t) via ISHE.

Magnetization in a FM, such as a magnetic insulator Y3Fe5O12 (YIG), is known to exhibit typical nonlinear dynamics; when a strong microwave is applied to a FM, a steady magnetization precession motion becomes unstable22, and auto-oscillation (AO) of the precession amplitude shows up as a nonlinear turbulent bifurcation effect when the microwave power is greater than the AO threshold power23,24,25,26,27,28,29,30,31. By further increasing the microwave power, the magnetization dynamics then collapses into a chaos phase32. Here, the AO frequency Ω is much less than the magnetization-precession frequency, in general23,24,25,26,27,28,29,30,31. However, the AO is an oscillation of the amplitude in the precession motion, and it does not contain a wave component of the frequency Ω; the AO was difficult to utilize.

Here we show that the AO of the precession amplitude can be converted into a voltage oscillation of a much lower frequency, Ω, inside a material exhibiting spin pumping (Fig. 1b). Spin current induced by spin pumping reflects the amplitude of the magnetization precession1, and spin pumping thus converts an amplitude oscillation into an oscillation of spin current, which can be converted into a voltage oscillation by using ISHE. By introducing spin pumping and ISHE into magnetization AO, we demonstrated huge frequency conversion from a microwave with the magnetization-precession frequency into an electric voltage oscillation with the frequency Ω.

Results

Ferromagnetic resonance in Pt/YIG

Figure 2a is a schematic illustration of the experimental set-up used in the present study. The sample consists of a single crystalline film of ferromagnetic insulator YIG (FM) on the top of which a polycrystalline Pt thin film (NM) is put; the Pt is used as a spin-current detector based on the ISHE. A microwave with the power P in was irradiated onto the sample with applying a static in-plane magnetic field (H). Power spectra of the reflected microwave from the sample, P refl, and the frequency spectrum of the voltage V generated between the ends of the Pt film were measured using a spectrum analyzer. We confirmed conventional d.c. ISHE voltages due to spin pumping by replacing the spectrum analyzer with a nanovoltmeter (see Supplementary Fig. S1).

Figure 2
figure2

Generation of MHz-band voltages from GHz-band microwaves. (a) Schematic illustration of the experimental set-up for the ferromagnetic resonance (FMR) and spin pumping measurements. H denotes the static magnetic field; P in the power of the incident microwave; P refl the reflected microwave; P abs the absorbed microwave by spin-wave resonance in Y3Fe5O12; P loss the return loss on the equipment. (b) Microwave frequency, f MW, dependence of the microwave absorption P refl /P in. The P in and the magnitude of H (H) were set at 541 mW and 545 Oe, respectively. (c,d) Microwave-power dependence of the reflected microwave at P in = 298 mW (c) and 541 mW (d). The most prominent excitation frequency (f ex) is 3.23 GHz. H was set at 545 Oe. In 541 mW, δf , δf , δf and δf are the sidepeak frequencies of reflected microwaves by the AO. The δf 1 is the fundamental frequency of the AO. δf 2 and δf 3 are higher harmonic components of δf 1. δf 0 is a subharmonic component of δf 1. The insets to (c) and (d) show schematic illustrations of the waveforms of the output microwave at P in = 298 mW (c, AO is off) and 541 mW (d, AO is on). P refl becomes the amplitude-modulated wave by the AO. (e,f) Voltage, V, spectra for the Pt/Y3Fe5O12 film at P in = 298 mW (e) and 541 mW (f). The frequency of the voltage is approximately 2.7 MHz. The inset to (f) shows the frequency spectrum of P refl at P in = 541 mW.

Figure 2b shows a microwave reflection spectrum, P refl/P in, measured for the Pt/YIG film at P in = 541 mW while sweeping the input microwave frequency f MW. A dip structure is clearly observed at 3.23 GHz. The dip shows that the absorption of the applied microwave is maximized at 3.23 GHz corresponding to the ferromagnetic resonance (FMR) excitation in the YIG. Hereafter, the values of the input microwave frequency and the external magnetic field were set to those in this FMR condition (f ex = 3.23 GHz and H = 545 Oe).

Auto-oscillation of magnetization

Figure 2c and d show the frequency power spectrum of the microwave P refl transmitted back from the sample, measured in the FMR condition (f ex = 3.23 GHz). At P in = 298 mW, a single peak appears at 3.23 GHz, the same frequency as the incident microwave f ex, which is a microwave reflected directly by the sample (see Fig. 2c). On the other hand, the spectra of P refl show a dramatic change when the incident microwave power is increased to induce nonlinear magnetization dynamics. With increasing P in to 541 mW, sidepeaks, labeled by δf, arose around the main peak at f ex = 3.23 GHz in the P refl spectrum (see Fig. 2d). The values of the frequency displacement of the sidepeaks from the main peak are about 0.9 MHz (δf ), 2.7 MHz (δf ), 5.4 MHz (δf ), and 8.1 MHz (δf ), which exhibit a clear periodicity. The appearance of the sidepeaks in the spectrum shows that auto-oscillation23,24,25,26,27,28,29,30 (AO) with the frequency δf appears at P in = 541 mW. At FMR along with AO, the precession trajectory of the YIG magnetization is periodically modulated with the MHz frequencies, which in turn modulates the FMR absorption intensity with the same MHz frequency. Hence, the amplitude of the output microwave is modulated with the MHz frequency, as shown in the inset of Fig. 2d.

MHz voltage due to spin pumping by auto-oscillation of magnetization

In the FMR condition, we measured frequency spectra of V between the ends of the Pt layer to detect spin-pumping ISHE voltage. Figure 2e and f show the V spectra measured in the MHz range. At P in = 298 mW (Fig. 2e), no voltage signal appears in V in the entire MHz range, consistent with the previous reports on ISHE induced by spin pumping14,15,16,17,18,19,20,21. On the other hand, importantly, with increasing P in to 541 mW (Fig. 2f), a voltage peak V peak shows up at Ω = 2.7 MHz in spite of the application of a GHz microwave. The peak amplitude V peak is about 0.66 μV, comparable to the typical d.c. ISHE voltage in literatures14,15,16,17,18,19,20,21. Although the AO itself does not produce MHz wave components as shown in the inset to Fig. 2f, the Pt/YIG can convert the AO into the MHz electric voltage. We note that the reproducibility of the MHz-band voltage was confirmed by replacing the sample and performing the same measurement several times (see Supplementary Fig. S2). It is also noted that the ISHE voltage was not observed at f ex + δf or f ex + δf ; these voltage signals seem too small to be observed within our experimental accuracy (see also Fig. 2d for much smaller absorption peaks at those higher harmonics in the reflected microwave spectrum).

Absence of MHz voltage in Pt/SiO2/YIG

To further confirm that the voltage peak at 2.7 MHz (Fig. 2f) originates from the spin pumping effect, a similar experiment was performed for Pt/SiO2/YIG, in which the SiO2 film prevents spin-current injection from YIG into Pt. Figure 3a and b compare the MHz-band voltage spectra between Pt/YIG and Pt/SiO2/YIG at various P in values. For Pt/SiO2/YIG, the voltage peak was found to disappear in the whole range of P in, while it is clearly observed for Pt/YIG in P in = 486–589 mW. Since the AO still appears in the P refl spectra for Pt/SiO2/YIG (see inset to Fig. 3b), the disappearance of the voltage peak shows that the spin exchange at the Pt/YIG interface is essential for the MHz voltage peak to appear. Hence, the voltage peak observed in Pt/YIG is attributed to MHz-band spin current due to spin pumping, not to other trivial origin, e.g. electromagnetic induction. We note that a rectification effect of magnetization dynamics based on spin-Hall magnetoresistance33, 34 may give rise to MHz voltage in the present experimental set-up; however, such a component is expected to be much smaller than that of spin pumping on the basis of experimental and theoretical studies on d.c. voltages rectified35,36,37. Separating these two effects quantitatively under auto-oscillation conditions is open to future studies.

Figure 3
figure3

AO-induced spin currents in MHz-band. (a,b) Frequency dependence of V in the MHz range in Pt/Y3Fe5O12 (a) and Pt/SiO2/Y3Fe5O12 (b) at various values of P in. Green points indicate frequencies of the AO, δf 1+, at each P in (see Fig. 2d). The inset to (b) shows the P refl spectrum for the Pt/SiO2/Y3Fe5O12 film at P in = 531 mW. The incident microwave frequency was 3.23 GHz. H was set at 545 Oe. (c) P in dependence of the peak height h AO of the GHz AO sidepeak at δf 1+ (h AO) and the MHz-band voltage peak (h ISHE), measured in the Pt/Y3Fe5O12 film (a). (d) P in dependence of the half width of the peak at δf 1+ for the GHz AO sidepeak, Δw AO, (Fig. 2d) and the MHz-band voltage peak, Δw ISHE, (a).

Dependence on power levels of incident microwave

In Fig. 3c and d, the peak shapes are compared between the main AO microwave signal at δf 1+ (Fig. 2d) and the MHz-band voltage peak (Fig. 3a) at various P in values, to further corroborate that the spin pumping drives the GHz-MHz down-conversion. The peak height h and the half width at the half maximum Δw are obtained by fitting the peaks to Lorentzian functions, and are plotted as functions of the incident microwave power P in in Fig. 3c and d, respectively. As shown in Fig. 3c, the peak height h shows the same P in dependence for the AO microwave signal and the voltage signal in the entire P in range: they reach their maximums at about 525 mW, and then decrease towards zero with further increasing P in. Also, Fig. 3d shows that the half width Δw for the main AO microwave signal at δf 1+ coincides with that for the voltage peak in the whole P in range. The similar P in dependence implies that the AO gives rise to the MHz-band voltage via the spin pumping effect. It is noted that Δw increases monotonically with P in. This broadening can be attributed to the gradual transition from the periodic AO to chaotic phase23,24,25,26,27, 31 at the very high P in values.

Discussion

In summary, we have demonstrated the generation of MHz-band spin currents using spin pumping from nonlinear magnetization dynamics of YIG. The generated MHz-band spin currents were converted into electric voltages using ISHE in Pt, which can enable frequency down-conversion from a GHz-band input microwave into a MHz-band output signal. The observed frequency down-conversion due to a spin current may have several advantages for future device application, though the conversion efficiency needs to be improved. First, Pt/YIG can down-convert a wide-range of microwaves since the mechanism is based on FMR. Second, the output frequency may be also tunable in a wide frequency range, from kHz to MHz, by changing the static magnetic field and the magnetization damping in the FM23,24,25,26,27,28. Such tunability within a MHz region was demonstrated as seen in Supplementary Fig. S3 although a window of the frequency tunability was narrow in the present study (~0.8 MHz). Third, the material system is a simple thin-film bilayer structure without using complex heterodyne circuits38. Nonlinear properties of the spin-current generation may realize a new scheme of material design for next-generation spintronics devices.

Methods

Sample preparation

A single crystalline Y3Fe5O12 (111) film (19-µm thick) was grown on a Gd3Ga5O12 (111) substrate (500-µm thick) by liquid phase epitaxy. The Y3Fe5O12 /Gd3Ga5O12 sample was cut into rectangles with the surface area of 1 × 1 mm2. The surface of the Y3Fe5O12 film was polished mechanically before the sputtering of Pt and SiO2 films. The Pt film (6-nm thick) was sputtered in an Ar atmosphere; the SiO2 film (20-nm thick) was sputtered in an Ar and O2 atmosphere in ratio of Ar:O2 = 10:3 in volume.

Spin pumping measurement

A coplanar waveguide was used to apply a microwave to the Pt/Y3Fe5O12 sample. The signal line of the coplanar waveguide was 200 µm wide, designed to match the characteristic impedance of 50 Ω. The microwave magnetic fields (3.23 GHz) and static magnetic fields (545 Oe) were applied perpendicular to each other within the plane of Y3Fe5O12 film. The microwave absorption P refl/P in was measured with a vector network analyzer (Agilent Technologies N5230N); the microwave transmittance with a spectrum analyzer (Agilent Technologies N9010A). When the incident microwave frequency is swept, d.c. voltage measured using a nanovoltmeter (Keithley 2182 A) shows a peak at f ex = 3.23 GHz, and exhibits sign reversal by reversing the magnetic field direction (see also Supplementary Information). The MHz-band voltage was amplified using a low noise preamplifier and measured using a spectrum analyzer. All of the measurements were performed at room temperature.

References

  1. 1.

    Maekawa, S., Saitoh, E., Valenzuela, S. O. & Kimura, T. (eds) Spin Current (Oxford University Press, Oxford, 2012).

  2. 2.

    Žutić, I., Fabian, J. & Das Sarma, S. Spintronics: fundamentals and applications. Rev. Mod. Phys. 76, 323 (2004).

    ADS  Article  Google Scholar 

  3. 3.

    Hoffmann, A. & Bader, S. D. Opportunities at the frontier of spintronics. Phys. Rev. Appl. 4, 047001 (2015).

    ADS  Article  Google Scholar 

  4. 4.

    Kajiwara, Y. et al. Transmission of electrical signals by spin-wave interconversion in a magnetic insulator. Nature 464, 262 (2010).

    ADS  CAS  Article  PubMed  Google Scholar 

  5. 5.

    Wang, Z., Sun, Y., Wu, M., Tiberkevich, V. & Slavin, A. Control of spin waves in a thin film ferromagnetic insulator through interfacial spin scattering. Phys. Rev. Lett. 107, 146602 (2011).

    ADS  Article  PubMed  Google Scholar 

  6. 6.

    Hamadeh, A. et al. Full control of the spin-wave damping in a magnetic insulator using spin-orbit torque. Phys. Rev. Lett. 113, 197203 (2014).

    ADS  CAS  Article  PubMed  Google Scholar 

  7. 7.

    Collet, M. et al. Generation of coherent spin-wave modes in yttrium iron garnet microdiscs by spin-orbit torque. Nat. Commun. 7, 10377 (2016).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  8. 8.

    Uchida, K. et al. Spin Seebeck insulator. Nat. Mater. 9, 894 (2010).

    ADS  CAS  Article  PubMed  Google Scholar 

  9. 9.

    Uchida, K. et al. Observation of longitudinal spin-Seebeck effect in magnetic insulators. Appl. Phys. Lett. 97, 172505 (2010).

    ADS  Article  Google Scholar 

  10. 10.

    Tserkovnyak, Y., Brataas, A. & Bauer, G. E. W. Enhanced Gilbert damping in thin ferromagnetic films. Phys. Rev. Lett. 88, 117601 (2002).

    ADS  Article  PubMed  Google Scholar 

  11. 11.

    Mizukami, S., Ando, Y. & Miyazaki, T. Effect of spin diffusion on Gilbert damping for a very thin permalloy layer in Cu/permalloy/Cu/Pt films. Phys. Rev. B 66, 104413 (2002).

    ADS  Article  Google Scholar 

  12. 12.

    Hoffmann, A. Spin Hall effects in metals. IEEE Trans. Magn. 49, 5172 (2013).

    ADS  CAS  Article  Google Scholar 

  13. 13.

    Sinova, J., Valenzuela, S. O., Wunderlich, J., Back, C. H. & Jungwirth, T. Spin Hall effects. Rev. Mod. Phys. 87, 1213 (2015).

    ADS  Article  Google Scholar 

  14. 14.

    Saitoh, E., Ueda, M., Miyajima, H. & Tatara, G. Conversion of spin current into charge current at room temperature: inverse spin-Hall effect. Appl. Phys. Lett. 88, 182509 (2006).

    ADS  Article  Google Scholar 

  15. 15.

    Kurebayashi, H. et al. Controlled enhancement of spin-current emission by three-magnon splitting. Nat. Mater. 10, 660 (2011).

    ADS  CAS  Article  PubMed  Google Scholar 

  16. 16.

    Sandweg, C. W. et al. Spin pumping by parametrically excited exchange magnons. Phys. Rev. Lett. 106, 216601 (2011).

    ADS  CAS  Article  PubMed  Google Scholar 

  17. 17.

    Ando, K. & Saitoh, E. Spin pumping by bistable exchange spin waves. Phys. Rev. Lett. 109, 026602 (2012).

    ADS  CAS  Article  PubMed  Google Scholar 

  18. 18.

    Sakimura, H., Tashiro, T. & Ando, K. Nonlinear spin-current enhancement enabled by spin-damping tuning. Nat. Commun. 5, 5730 (2014).

    ADS  CAS  Article  PubMed  Google Scholar 

  19. 19.

    Tashiro, T. et al. Spin-current emission governed by nonlinear spin dynamics. Sci. Rep. 5, 15158 (2015).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  20. 20.

    Lustikova, J., Shiomi, Y., Handa, Y. & Saitoh, E. Spectral shape deformation in inverse spin Hall voltage in Y3Fe5O12|Pt bilayers at high microwave power levels. J. Appl. Phys. 117, 073901 (2015).

    ADS  Article  Google Scholar 

  21. 21.

    Zhou, H. et al. Spin pumping in the nonlinear dynamic regime of a Pt/Y3Fe5O12 heterostructure. Appl. Phys. Lett. 108, 192408 (2016).

    ADS  Article  Google Scholar 

  22. 22.

    Suhl, H. The theory of ferromagnetic resonance at high signal powers. J. Phys. Chem. Solids. 1, 209 (1957).

    ADS  Article  Google Scholar 

  23. 23.

    Wigen, P. E. (eds) Nonlinear Phenomena and Chaos in Magnetic Materials (World Scientific, Singapore, 1994).

  24. 24.

    Zakharov, V. E., L’vov, V. S. & Starobinets, S. S. Spin-wave turbulence beyond the parametric excitation threshold. Sov. Phys. Usp. 17, 896 (1975).

    ADS  Article  Google Scholar 

  25. 25.

    Bryant, P., Jeffries, C. & Nakamura, K. Spin-wave turbulence. Nucl. Phys. B (Proc. Suppl.) 2, 25 (1987).

    ADS  Article  Google Scholar 

  26. 26.

    Yamazaki, H. & Mino, M. Chaos in spin-wave instabilities theory and experiments. Prog. Theor. Phys. Suppl. 98, 400 (1989).

    ADS  Article  Google Scholar 

  27. 27.

    Rezende, S. M. & Aguiar, F. M. Spin-wave instabilities, auto-oscillations, and chaos in yttrium-iron-garnet. Proc. IEEE 78, 893 (1990).

    CAS  Article  Google Scholar 

  28. 28.

    Zhang, X. Y. & Suhl, H. Theory of auto-oscillations in high-power ferromagnetic resonance. Phys. Rev. B 38, 4893 (1988).

    ADS  CAS  Article  Google Scholar 

  29. 29.

    Lϋhrmann, B., Ye, M., Dötsh, H. & Gerspach, A. Nonlinearities in the ferromagnetic resonance in epitaxial garnet films. J. Magn. Magn. Mater. 96, 237 (1991).

    ADS  Article  Google Scholar 

  30. 30.

    Prabhakar, A. & Stancil, D. D. Variations in auto-oscillation frequency at the main resonance in rectangular yttrium-iron-garnet films. J. Appl. Phys. 79, 5374 (1996).

    ADS  CAS  Article  Google Scholar 

  31. 31.

    Rezende, S. M., de Aguiar, F. M. & Azevedo, A. Spin-wave self-oscillations: experimental verification of the two-mode origin. J. Appl. Phys. 73, 6805 (1993).

    ADS  CAS  Article  Google Scholar 

  32. 32.

    Nakamura, K., Ohta, S. & Kawasaki, K. Chaotic states of ferromagnets in strong parallel pumping fields. J. Phys. C 15, L143 (1982).

    ADS  Article  Google Scholar 

  33. 33.

    Nakayama, H. et al. Spin Hall magnetoresistance induced by a nonequilibrium proximity effect. Phys. Rev. Lett. 110, 206601 (2013).

    ADS  CAS  Article  PubMed  Google Scholar 

  34. 34.

    Chen, Y.-T. et al. Theory of spin Hall magnetoresistance. Phys. Rev. B 87, 144411 (2013).

    ADS  Article  Google Scholar 

  35. 35.

    Iguchi, R., Sato, K., Hirobe, D., Daimon, S. & Saitoh, E. Effect of spin Hall magnetoresistance on spin pumping measurements in insulating magnet/metal systems. Appl. Phys. Exp. 7, 013003 (2014).

    ADS  Article  Google Scholar 

  36. 36.

    Chiba, T., Bauer, G. E. W. & Takahashi, S. Current-induced spin-torque resonance of magnetic insulators. Phys. Rev. Appl. 2, 034003 (2014).

    ADS  Article  Google Scholar 

  37. 37.

    Chen, Y.-T. et al. Theory of spin Hall magnetoresistance (SMR) and related phenomena. J. Phys.: Condens. Matter 28, 103004 (2016).

    ADS  Google Scholar 

  38. 38.

    Mirabbasi, S. & Martin, K. Classical and modern receiver architectures. IEEE Commun. Mag. 38, 132 (2000).

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by ERATO ‘Spin Quantum Rectification Project’ from JST, Japan, Grant-in-Aid for Scientific Research on Innovative Area ‘Nano Spin Conversion Science’ (No. 26103005), Grants-in-Aid for Scientific Research (No. 25247056) from MEXT, Japan, and Center for Spintronics Research Network (CSRN), Tohoku University, Japan. D.H. is supported by the Yoshida Scholarship Foundation through the Doctor 21 programme. S.D. is supported by JSPS through a research fellowship for young scientists (No. 16J02422).

Author information

Affiliations

Authors

Contributions

S.W. and D.H. designed the experiments. S.W. collected and analyzed the data. R.I. and S.D. supported the experiments. M.K. and S.T. contributed to the theoretical interpretation of the experiments. Y.S. and E.S. supervised the study. S.W., D.H., Y.S. and E.S. wrote the manuscript. All authors discussed the results and commented on the manuscript.

Corresponding author

Correspondence to Yuki Shiomi.

Ethics declarations

Competing Interests

The authors declare that they have no competing interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Watanabe, S., Hirobe, D., Shiomi, Y. et al. Generation of megahertz-band spin currents using nonlinear spin pumping. Sci Rep 7, 4576 (2017). https://doi.org/10.1038/s41598-017-04901-4

Download citation

Further reading

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.