Solar variability has been hypothesized to be a major driver of North Atlantic millennial-scale climate variations through the Holocene along with orbitally induced insolation change. However, another important climate driver, volcanic forcing has generally been underestimated prior to the past 2,500 years partly owing to the lack of proper proxy temperature records. Here, we reconstruct seasonally unbiased and physically constrained Greenland Summit temperatures over the Holocene using argon and nitrogen isotopes within trapped air in a Greenland ice core (GISP2). We show that a series of volcanic eruptions through the Holocene played an important role in driving centennial to millennial-scale temperature changes in Greenland. The reconstructed Greenland temperature exhibits significant millennial correlations with K+ and Na+ ions in the GISP2 ice core (proxies for atmospheric circulation patterns), and δ18O of Oman and Chinese Dongge cave stalagmites (proxies for monsoon activity), indicating that the reconstructed temperature contains hemispheric signals. Climate model simulations forced with the volcanic forcing further suggest that a series of large volcanic eruptions induced hemispheric-wide centennial to millennial-scale variability through ocean/sea-ice feedbacks. Therefore, we conclude that volcanic activity played a critical role in driving centennial to millennial-scale Holocene temperature variability in Greenland and likely beyond.
Holocene climate variability is important to understand the process of human societal development from a hunter-gatherer society to the present complex society1,2. However, precise understanding of Holocene climate variability on multidecadal to millennial scales has been elusive owing to the lack of adequate archives recording small temperature signals and poorer chronologies further back in time3. Therefore, we employed a relatively newly established method of temperature reconstruction using argon and nitrogen isotopes in occluded air within ice cores (Methods; Figs S1 and S2)4. This method relies on temperature-dependent gas fractionation in the unconsolidated snow layer5. Temperature gradients between the top and bottom of the unconsolidated snow layer induce gas fractionation6. After which the fractionated gasses are trapped in ice at the bottom of the firn layer4. By measuring nitrogen and argon isotopes in ice cores, we can reconstruct past temperature gradients (Fig. S3)4, which combined with observed borehole temperature data and a firn densification/heat diffusion model, are used to reconstruct past surface temperature changes4,7,8. Reconstructed temperatures (Supplementary Dataset) are seasonally unbiased multidecadal average temperatures due to the processes of heat and gas diffusion in the firn layer4,5, and are constrained by borehole temperature profiles4 (Method; Fig. S4). Sampling density is not constant through the Holocene such that uncertainty ranges of the reconstructed temperatures vary with time9.
Continuously observed instrumental Greenland Summit air temperature (GISP2) is now available for 28 years10 (1988 to 2015; Fig. 1a), allowing us to place the current decadal average temperature into the long-term context of the Holocene. The record exhibits the characteristic temperature drop in 1992–1993 associated with cooling caused by the eruption of Mt. Pinatubo11, followed by an increase until 2005 (Fig. 1a). For the most recent 10 years (2005 to 2015), apart from the anomalously warm year of 2010, mean annual temperatures at the Summit exhibit a slightly decreasing trend in accordance with northern North Atlantic-wide cooling12. The Summit temperatures are well correlated (r ~ 0.7–0.8; p < 0.01) with southwest coastal records (Ilulissat, Kangerlussuaq, Nuuk, and Qaqortoq; Fig. 1a). The high correlations between the Summit record and coastal temperatures allow us to use the longer coastal records to estimate Greenland Summit temperatures over the past 160 years (Fig. 1b). During this period, large volcanic eruptions caused 1 to 3 years cooling episodes in Greenland13. Importantly, the reconstructed nitrogen-argon-isotope-based temperatures (hereafter, reconstructed temperatures) agree well with the instrumental records on a multi-decadal scale (Fig. 1b).
The reconstructed temperatures exhibit a long-term trend similar to that of average δ18Oice (GISP214, GRIP and NGRIP; Fig. 2). However, the δ18Oice records lack strong centennial to millennial-scale variability (e.g., the Medieval Climate Anomaly and Little Ice Age; Fig. 2). We find that 27% of the Holocene Greenland temperatures are higher than the present multi-decadal average (1988–2015, hereafter “the recent decades”; Figs 1 and 2a, Fig. S5). The reconstructed temperature reached the present level around 9,500 years B.P., which is earlier than that of the borehole based reconstruction (around 8,000 years B.P., Fig. 2). This is likely because borehole temperature reconstructions are unable to capture sharp transitions such as the one from the cold Younger Dryas to the warm Holocene due to the smoothing effect by diffusion of heat in the ice-sheet (Methods). Consistent with an earlier conclusion14,15 from δ18Oice, Greenland climate remained relatively stable and warm during the Holocene, compared to the highly variable and cold last glacial period (Fig. S6).
After an abrupt warming at the end of the Younger Dryas period, Greenland temperature gradually decreased toward the Holocene temperature minimum at 11,271 ± 30 years B.P. (9.2 ± 1.5 °C colder than the recent decades; Preboreal Oscillation), which was followed by another abrupt warming (Figs 2 and 3)16. From 11,000 years B.P. to 9,500 years B.P., the temperature kept rising at a rate of 3.7 ± 0.1 °C per 1,000 years (Figs 2 and 3). At 9,200 years B.P., Greenland experienced a rapid cooling (9.2 ka event)17. Afterwards, the temperature gradually decreased with occasional large drops (Figs 2 and 3). Then, Greenland experienced the largest hemispheric-wide negative temperature excursion during the Holocene around 8,200 years B.P. (8.2 ka event)18,19.
After the 8.2 ka event, Greenland temperature reached the Holocene thermal maximum with the warmest decades occurring during the Holocene (2.9 ± 1.4 °C warmer than the recent decades) at 7960 ± 30 years B.P. Since then, the Summit temperature record exhibits a long-term cooling at a rate of 0.19 ± 0.01 °C per 1000 years towards the present (1.5 ± 0.1 °C cooling in total), agreeing with other estimates from melt layer frequency (1.3 °C) in GISP2 ice core20 (Fig. 2b) and from the western Arctic (1.6 ± 0.8 °C; an average estimate of western Arctic cooling)21. Greenland experienced a temperature minimum around 5,500 years B.P. Afterwards, the temperature shows a slight increase for 1,500 years (Mid-Holocene Optimum), followed by a cooling into the Little Ice Age with occasional bumps (Fig. 2). From the coldest decades in the Little Ice Age (1740–1780 C.E.) to the recent decades, Greenland Summit temperature increased by 2.9 ± 0.9 °C.
The centennial to millennial-scale variability of the reconstructed Greenland temperature is significantly correlated with Na+ and K+ ion concentrations22,23 from the GISP2 ice core, which are proxies for atmospheric circulation, as well as with the Oman and Dongge cave stalagmite δ18O records, proxies for monsoon activity, thus indicating that the reconstructed Greenland temperature variations contain hemispheric climate signals3,23 (Methods; Fig. 4f–i). This is consistent with the observation that Greenland temperature generally followed proxy-based Northern Hemisphere (NH) average temperature changes over the past 2,000 years4.
To investigate possible causes of the temperature variability, we conducted a suite of climate model experiments with different sets of orbital, volcanic, solar, greenhouse gasses (GHG; CO2, CH4, and N2O; Methods) forcings (Fig. 3e) as well as prescribed ice-sheet changes (i.e., ICE6G24; ice covered area, topography, and ice-sheet thickness) using the climate model of intermediate complexity, LOVECLIM25 (Methods; Fig. 3). Volcanic forcing is reconstructed using the GISP2 sulfate record22, which agrees well with multi-core reconstructions26 for centennial to millennial-scale variability during the overlapping period of the past 2,500 years (Methods; Fig. S7).
The experiments that include all forcings generally reproduce long-term Greenland temperature variations quite well with a cooling of 0.17 °C/1000 years since 7000 years B.P. (Fig. 3b). Five additional experiments were conducted with sets of forcings that excluded one out of the GHG, orbital, volcanic, solar, and ice-sheet forcings at a time (Fig. 3b–d). An experiment with fixed present-day ice-sheet configuration indicates that the temperature rise from the beginning of the Holocene to 7,000 years B.P. was the result of the retreating Laurentide ice-sheet27, while the thinning of ice-sheet (~70 m)24 played a minor role on the middle to late Holocene cooling (Fig. 3; Fig. S8).
In these simulations, meltwater inputs from retreating Northern Hemispheric ice-sheets were not taken into account. Particularly, through changes in ocean heat content, the Younger Dryas could have had an impact on temperature trends in the early Holocene (12,000–10,000 yrs B.P.). In addition, through weakening of the Atlantic Meridional Circulation and associated reduction in poleward oceanic heat transport, deglacial meltwater fluxes could have influenced the Northern hemispheric climate until 7,000 years B,P., and particularly during the 8.2 ka B.P. event28.
Two numerical experiments exhibit significantly different temperature trends from the middle Holocene to the present (Fig. 3b). From 7,000 years B.P. to the present, the experiment without orbital forcing displays a warming trend, whereas the simulation without GHG forcing overestimates the cooling trend. Therefore, the decreasing temperature trend from the middle to the late Holocene likely results from orbital forcing, but 43% of the orbitally induced cooling was compensated by the increasing GHG forcing (Fig. 3b). The reconstructed Greenland temperature and modeled NH average temperature are significantly correlated (r = 0.52, p < 0.01) on a centennial to millennial scale (400–4000 year band; Fig. 4e) over the past 10,000 years. The amplitude of temperature variability in simulated NH average temperature is small, but increases from low to high latitudes with amplified noises (Fig. 3d). Over 80% of the simulated hemispheric variability can be explained by volcanic forcing, as the millennial-scale variability (400–4000 year band) of NH temperature and volcanic impact index (VII = “NH average temperatures from full forcing experiments” minus “NH average temperature from no-volcanic forcing experiments” as in Figs 3c and 4b) are highly correlated (r = 0.90, p < 0.001) (Fig. 4e). Importantly, the VII has a significant correlation with the reconstructed Greenland temperature (r = 0.48, p < 0.01; Fig. 4e). As volcanic eruptions should not a-priori be related with changes in meltwater forcing, volcanic impacts on the variability of Greenland temperature do not exclude possible meltwater impacts (e.g., the 8.2 ka event28).
Recent studies indicate that large volcanic eruptions separated by several decades could induce decadal to centennial cooling in the northern hemisphere (e.g., Little Ice Age) by sea-ice/ocean feedbacks long after volcanic aerosols are removed from the atmosphere26,29. In our model experiments, volcanic impacts on climate show clear multi-decadal to millennial variabilities (Fig. 4), although the millennial signals are smaller than those found in the reconstructed temperatures (Fig. 3). The reduced magnitude of the millennial-scale signals in the model could partly be explained by the lack of a cryosphere component and thus potential positive feedbacks between the ice-sheet and ocean-atmosphere system.
In our simulations, a single large volcanic eruption induces rapid atmospheric and ocean surface cooling coupled with sea-ice expansion, which lasts about 16 years. However, slightly lower temperatures persist at high northern latitudes for a century or longer owing to decreased ocean temperatures, which affect ocean surface and sea-ice formation (Fig. 4a–d). Furthermore, a series of large volcanic eruptions (e.g., 9000–8000 years B.P. and the Little Ice Age) produces cold periods of centennial to millennial duration (Fig. 4a–d), which coincide with the reconstructed Greenland temperature decreases, stronger polar atmospheric circulation ([K+] and [Na+] in GISP2), and weaker Asian monsoon activity (Fig. 4e–i).
The period between 8,600 and 8,000 years B.P. featuring the most intense volcanic activity is also the one corresponding to strong meltwater outbreak from the Laurentide ice sheet28 (Fig. 4). The beginning of the cooling started earlier than the rapid drop in δ18Oice at 8,200 years B.P. (the 8.2 ka event; Figs 2 and 3). The pre-8.2 ka cooling has been found in many summer temperature proxies18, consistent with volcanically induced summer cooling. Therefore, the 8.2 ka cooling event18 occurred during a longer-term cold period attributable to volcanic origin, which could have enhanced the sensitivity to meltwater outbreaks from the Laurentide ice sheet. We also note that the mid-Holocene Optimum (5,500–4,000 years B.P.) is characterized by a lack of large volcanic eruptions (Figs 3 and 4). After a period of intensive volcanism and associated cooling (6,000–5,800 years B.P.), a gradual return to a volcanically unperturbed state can be found in modeled 60–90°N average temperatures and in the reconstructed Greenland temperatures. Volcanic activity intensifies again towards the Little Ice Age. Only during the mid-Holocene Optimum were the ocean temperatures in the volcanically unperturbed state (Fig. 4), suggesting that the Holocene climate was mostly under the persistent influence of volcanic activity that is consistent with our earlier studies for the past 4000 years30.
Comparisons between the reconstructed Greenland temperatures, reconstructed solar irradiance (TSI)31, and model results indicate that solar variability did not play a persistent role in driving millennial-scale variability in Greenland. Nevertheless, solar variability had significant negative imprints on centennial temperature changes especially during the colder periods of the early and late Holocene (stronger solar activities induced colder temperatures in Greenland, or vice versa; Fig. S9) consistent with earlier studies4,32. Notably, periods of stronger solar activity in the early Holocene coincide with several rapid cooling periods (e.g., the Preboreal Oscillation and the 8.2 ka event; Fig. S9), indicating that abrupt climate change events during the Holocene may result from changes in several forcings (volcanic, solar, and meltwater inputs), with possible synergetic effects.
We reconstructed the seasonally unbiased and physically constrained Greenland temperature over the Holocene. In contrast to δ18Oice, the reconstructed Greenland temperature exhibits clear centennial to millennial-scale variability, which is reproduced by climate model simulations including volcanic forcing. Large volcanic eruptions had sustained impacts on climate and people over the past 2,500 years26. Clearly, the volcanic impacts were not limited to the recent millennia, but persisted throughout the Holocene with possible important roles on human societal development.
To evaluate relationships of two time series, we applied the Pearson correlation coefficient. We consider autocorrelation of the time series to evaluate the significance of correlations by estimating the effective degree of freedom that depends on the effective decorrelation time33,34. Correlations or any statistics with >95% confidence levels are considered as significant. Reported uncertainty ranges are 2σ standard deviation unless otherwise stated. Z-score is a measure of a time series having mean zero and standard deviation of one. For filtering of the time series, we used a MATLAB function, “butter”.
We used the Greenland ice core chronology (GICC05), which is based on annual layer counting from multiple cores, synchronized with common volcanic layers35,36. Recent studies indicated that GICC05 has slight offsets (up to 70 years37 in the early Holocene) from true ages, or more precisely, from dendrochronologically-inferred calendar ages26,37,38. Therefore, we correct the offsets using the coefficients from Muscheler et al.37. The corrected chronology thus has a common time scale with 14C-dated paleo records. For gas age calculations, we used a firn-densification and heat diffusion model39 for the entire Holocene as an extension of the past 2,100 year calculation from our earlier study4. The agreement of timing of climate changes (e.g., the 8.2 ka event and Preboreal Oscillation) between δ18Oice and the reconstructed temperature confirms the validity of the estimated gas ages.
Oxygen isotopes of ice (δ18Oice) have been widely used as a temperature proxy14,15, but δ18Oice is influenced for example by seasonal changes of accumulation and water vapor source regions15,40,41. Borehole temperature reconstructions are a robust method to infer past temperatures, but their resolution decreases rapidly towards earlier ages42. Therefore, we have been developing a method to overcome drawbacks of existing temperature proxies using argon and nitrogen isotopes within occluded air in ice cores4,7,8,9,43.
The temperature calculation generally follows earlier studies for the past few millennia4,7 with slight modifications for a longer period of the Holocene. We used argon and nitrogen isotope data over the Holocene from the GISP2 ice core9. Argon isotopes data requires a minor correction using δAr/N2 data to compensate for possible fractionation during bubble close-off between open and closed pores7,8. However, δAr/N2 data exhibit anomalous enrichments at brittle ice depths of a brittle zone (9,000–6000 years B.P.)9,43, which prohibited us from calculating the surface temperature through the Holocene until now. As we gained understanding of the δAr/N2 fractionation in the firn layer43, it became possible to estimate pre-coring δAr/N2 values43 at the brittle zone by using accumulation rate44,45 and δ18Oice46 data. For the argon isotope correction, we used δAr/N2 data9 for the past 6,000 years and the estimated δAr/N2 for the earlier part of the Holocene. However, we found that the surface temperature reconstruction by correcting argon isotopes by a constant value (i.e., without δ18Oice and accumulation rate) is essentially the same as the surface temperature reconstruction with argon isotopes corrected by the estimated δAr/N2 using the δ18Oice and accumulation rate. For the coefficient of argon isotope correction with δAr/N2, we applied the value (0.0073‰/‰) that was used for the temperature reconstruction over the past 4,000 years7.
Temperature gradients [ΔT (°C) = (δ15N-δ40Ar/4)/k] (Fig. S2) between the top and bottom of the firn layer6 can be obtained from nitrogen and the corrected argon isotope data with the coefficient (k) obtained from laboratory experiments47,48. The ΔT data were splined49 with a 51-year cutoff period (Fig. S3). Then, the data were again resampled for the sampling ages and used for the following calculations. Surface temperatures were calculated using a firn densification/heat diffusion model39 by integrating the ΔTs4,7,8. For a long integration of ΔT, it is important to have precise ΔT values as small errors could lead to drifts on the calculated surface temperatures during the integration. We circumvented the drifts by allowing slight constant shifts in ΔT by minimizing the difference between the observed and modeled δ15N. The ΔT integration was performed by dividing the Holocene into nine sections (about 1500-year intervals) including the sections of different measurement periods (e.g., different extraction setups9) to minimize the drift. We tested different sections and found little differences in the calculated surface temperatures. Observed and modelled ΔTs agree within their uncertainties (Fig. S3).
The calculation started at 50,000 years B.P. to take a memory effect of temperature in the ice-sheet39 into account. From 50,000 to 20,000 years B.P., δ18Oice was used as temperature after the calibration45,46. For the later period to the beginning of the Holocene (20,000 to 11,460 years B.P.), a temperature reconstruction from δ15N was used50. For both periods, slight constant shifts for prescribed temperatures were allowed to fit with borehole temperatures during the following minimization procedure. Surface temperature calculations are conducted automatically to minimize the differences between the modelled and observed δ15N and borehole temperature profiles with parameters (A, B) using a MATLAB function, “fminsearch” (Nelder-Mead simplex method)51. In total, 843 Greenland temperature time series were generated from different realizations of argon and nitrogen isotopic values produced within estimated errors4. For one realization, about 360 runs from 50,000 years B.P. to present were necessary with different values for each parameter. We further selected 646 realizations that have root mean square deviations of <0.0185‰ for the difference between the modeled and observed δ15N and <0.2 °C for the borehole temperature profiles. The 646 realizations were used to calculate mean and standard deviation of the reconstructed Greenland temperature. Comparisons between the calculated surface temperatures and raw ΔT variations (calculated from δ40Ar not corrected for argon loss) indicate that most of the variability in the reconstructed temperature originates from the variability in raw ΔT (Fig. S2). Argon corrections or surface temperature calculations only slightly influence the variability in the calculated surface temperature over the past 10,000 years (Fig. S2)4.
The temperature reconstruction from 1941 to 1993 C.E. was done using a borehole temperature inversion technique4, and a slight temperature shift at 1941 in Fig. 1 is due to the change in method. We also note that temperature calculations using only δ15N40,41 produce somewhat different surface temperature histories. To capture small temperature changes such as those in the Holocene, high-precision nitrogen and argon data9 and calculated temperature signals ΔT are critical for the surface temperature calculation.
In Fig. 2, the reconstructed Greenland temperatures are compared with average δ18Oice (GRIP, NGRIP, and GISP2). The average δ18Oice has a temperature sensitivity of 0.36 permil/°C (geometric regression), and the correlation coefficient between the average δ18Oice and temperature is r = 0.80 (p = 0.01). The reconstructed Greenland temperature vs δ18Oice GRIP, NGRIP, and GISP2 has correlations of r = 0.76 (p = 0.01), 0.76 (p = 0.02), and 0.71 (p = 0.01), respectively. In Fig. 4, bandpass-filtered (400–4000 year bands) Greenland temperatures are compared with modeled NH average temperatures (r = 0.52, p < 0.01), VII (r = 0.49, p < 0.01), Na+ ion in GISP2 (r = −0.49, p = 0.01), K+ ion in GISP2 (r = −0.51, p < 0.01), Oman cave stalagmite δ18O (r = −0.44, p = 0.02), Dongge cave stalagmite δ18O (r = −0.28, p < 0.01) that exhibits a significant correlation with the Greenland temperature in shorter periods (200–2000 year bands). The Dongge cave record has a less significant correlation (r = −0.23, p = 0.12) on 400–4000 year bands presumably because it is less influenced by North Atlantic climate. The bands were chosen to remove long term trends (e.g., orbital scale variation) and reduce noise.
Climate model experiments
We employed a three-dimensional Earth system model of intermediate complexity, LOVECLIM version 1.325. The atmospheric component is ECBilt2, a T21, 3-level quasi-geostrophic model, fully coupled to the ocean general circulation model, CLIO3 (3° by 3° horizontal resolution, 20 vertical levels) and to the vegetation model, VECODE. To conduct transient experiments of the Holocene period, volcanic, solar, greenhouse gas and orbital52 forcings were applied with variable ice-sheet configurations (ICE6G)24. For the solar forcing, we used a reconstruction of total solar irradiance (TSI) for the Holocene from tree-ring 14C data31. The greenhouse gas forcing includes CO253,54,55, CH456, and N2O57, and concentration data are used as inputs in the model. The ice-sheet changes include extents, thickness (e.g., Greenland Ice-sheet), and ice covered area from the ICE 6 G database24. To precondition the ocean before the Holocene integration, an equilibrium simulation was conducted for 2,700 years with parameters for 20,000 years B.P., after which the model was transiently integrated towards the beginning of the Holocene with variable ice-sheets, greenhouse gas and orbital forcings (pre-Holocene run). A suite of Holocene experiments, initiated from 12,000 years B.P., were then performed with different sets of forcings. The initial conditions (a, b, c, and d) were derived from the end of the pre-Holocene run (12,000 years B.P.), and dates going back approximately 100 years apart from the end of the pre-Holocene run. We conducted four experiments with full forcings (initial conditions = a, b, c, and d), four experiments with full but without volcanic forcing (initial conditions = a, b, c, and d), and four experiments with full but without greenhouse gas, solar, orbital, or ice-sheet forcing.
Volcanic forcing is generated from a sulfate concentration record of GISP222 and is an extension of the volcanic forcing generated for the study over the past 4,000 years30. The method30 generally follows a study by Gao et al.58. The selected volcanic peaks are set to decay with an e-folding time of 1 year, approximating sulfate aerosol removal processes in the atmosphere30,59. The GISP2 sulfate record has been used as a proxy for volcanic eruptions in numerous studies3,60,61. However, to our knowledge, this is the first study to use the record to produce volcanic forcing and run a climate model through the Holocene. The sulfate signals are linearly related to volcanic forcing. It has been indicated that sulfate loading in the atmosphere may become increasingly less effective to radiative forcing62. Therefore, linear relation may overestimate the size of the large eruptions.
We compared the volcanic forcing with more complete volcanic forcings from several studies using multi-ice cores26,58 (Fig. S7). For the past 1,500 years, the volcanic forcings from this study and Sigl et al.26 (Fig. S7b,c) have a correlation of r = 0.78, p = 0.0018, while this study vs. Gao et al.58 has a correlation coefficient r = 0.86, p = 0.0017, and Gao et al.58 vs. Sigl et al.26 have a correlation of r = 0.86, p < 0.001. Therefore, over 70% of the total variance of volcanic forcing from multiple cores (Gao et al.) can be obtained by the single core (GISP2). For the past 2,500 years, this study and Sigl et al.26 display a slightly lower correlation of r = 0.69, p < 0.001, indicating that the reconstructed volcanic forcing obtained in this study well captures centennial to millennial trends of more complete volcanic forcings (Sigl et al.26 and Gao et al.58). In addition, we note that during the periods of frequent large eruptions such as in the past 1,000 years, volcanic forcing reconstruction from a single core performs better than the periods of less frequent eruptions. The reconstructed volcanic forcing sometimes misses eruptions when compared with more complete reconstructions in raw data26 (Fig. S7). Therefore our reconstruction is likely to be a lower-band estimate of true volcanic forcing. Also, we note that the strength of our volcanic forcing is located in the middle between Sigl et al.26 and Gao et al.58 reconstructions (Fig. S7), although the strength of true volcanic forcing is still under debate. In LOVECLIM, the volcanic forcing is implemented through anomalies in solar irradiance at the top of the atmosphere.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
We thank H. Goosse for advice on LOVECLIM experiments. The project is supported by the E.U. Marie Curie Fellowship (624183; Greentemp) to T.K.L. Menviel acknowledges funding from the Australian Research Council grant DE150100107. J.E.B. was supported by Geocenter Denmark.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.