Abstract
Tailoring the electric-field waveform of ultrashort light pulses forms the basis for controlling nonlinear optical phenomena on their genuine, attosecond timescale. Here we extend waveform control from the visible and near-infrared—where it was previously demonstrated—to the mid-infrared spectral range. Our approach yields single-cycle infrared pulses over several octaves for the first time. Sub-10-fs pulses from a carrier-envelope-phase-stabilized, Kerr-lens-mode-locked, diode-pumped Cr:ZnS laser drive cascaded intrapulse difference-frequency generation and control the electric-field evolution of the resulting coherent emission over 0.9–12.0 μm. Sub-cycle field control in this wavelength range will be instrumental for launching and steering few-femtosecond electron/hole wavepackets in low-gap materials, extending the bandwidth of electronic signal processing to multi-terahertz frequencies, as well as for electric-field-resolved molecular fingerprinting of biological systems.
Similar content being viewed by others
Main
The confinement of laser light to a few periods of its oscillating electromagnetic fields gives rise to extreme nonlinear interactions—the control and exploitation of which requires precise control of the fields’ temporal evolution1. Once this control became available2, few-cycle-driven nonlinear optics permitted the reproducible generation of isolated attosecond pulses, in atomic gases3 as well as in solids4,5,6. Optical-field control also opened the way to trigger solid-state electronic processes on a sub-femtosecond timescale7,8,9,10 and, in combination with field-enhancing nanostructures10,11,12, even with picojoule pulse energies13.
Extreme nonlinear optics and its applications have predominantly been demonstrated in the near-infrared (near-IR) spectral region, where precision dispersion management over super-octave bandwidth and controlled few-cycle to single-cycle waveforms have become available14. Extension of waveform control to the mid-infrared (mid-IR) spectral range is motivated by a plethora of applications. Examples include the scaling of terahertz electronics15,16,17 and orbital imaging and control18,19 towards optical (≫1 THz) frequencies, the development of novel optoelectronic devices based on low-bandgap highly doped semiconductors12,20 and the advancement of electric-field molecular fingerprinting of biological systems21,22,23.
In the absence of suitable laser gain media, the frequency downconversion of femtosecond near-IR pulses has been used to produce coherent radiation in the mid-IR range spanning an octave or more24,25,26,27,28,29,30,31,32,33,34, but full phase control over this vast bandwidth is lacking thus far. Adaptive optics have been demonstrated to shape mid-IR radiation over limited (sub-octave) bandwidth35,36. Scaling this approach to multi-octave spectral coverage would require the sub-division of the multi-octave spectral band into a number of channels, their independent modulation and subsequent interferometric recombination. These measures increase system complexity and impair the reproducibility of output waveforms14. Alternatively, the near-IR driver can be shaped before frequency conversion37,38. By using orientation-patterned nonlinear crystals, adiabatic difference-frequency generation has recently yielded super-octave (1.8–4.4 µm) single-cycle mid-IR pulses with a pulse envelope that can be arbitrarily shaped39. None of these techniques have provided pulse-to-pulse reproducible waveforms so far.
In this Article, we present a new approach for coherent multi-octave mid-IR generation with an intrinsic capability of changing the relative phase of different spectral regions and thereby shaping the emerging waveform. Specifically, we create mid-IR waveforms in several spectral bands by cascaded intrapulse difference-frequency generation (IPDFG)31,40 and manipulate their spectral phases by taking advantage of their different dependence characteristics on the carrier-envelope phase (CEP) of the driving pulse. The adjustment of the relative phase of different spectral components—across over 3.7 optical octaves—is achieved without the need for spatial separation and subsequent interferometric recombination14. Our approach yields the first multi-octave synthesis of single-cycle mid-IR waveforms, with a continuously adjustable, highly reproducible electric-field evolution. The concept is generalizable towards the synthesis of a wider variety of infrared waveforms by increasing the number of adjustable parameters, such as the control of spectral phase and amplitude of the driving pulse before the cascaded IPDFG.
Cascaded IPDFG
The basic principle of cascaded IPDFG is illustrated in Fig. 1, based on a simplified modelling of broadband light propagating through a nonlinear crystal (Supplementary Section 7). To isolate and visualize the relevant frequency-mixing processes, the driving laser is represented by two isolated narrowband spectral components (centred at 1.9 and 2.3 µm) of its entire spectrum, sharing the same CEP (Fig. 1, dashed black curves).
Difference-frequency mixing of the two driving components initially creates a peak at 30 THz. Since the two driving components share the same CEP value, the mixing product’s CEP is invariant to CEP changes of the driver. This fundamental (zeroth order) IPDFG field, on further propagation in the nonlinear medium, mixes with one of the narrowband drivers to create components at 100 THz (first cascading order). This cascading effect continues with the re-mixing of the first order and one of the driving components to generate new frequencies near 60 THz (second order), which, in turn, generate the 70 THz band (third order)40. Depending on the cascading order, the CEP of the newly generated wavelength components will either be invariant to (even orders) or follow the changes in the CEP of the driver (odd orders). Consequently, any changes in the driver CEP modifies the combined electric-field waveform in the time domain. This also implies that the electric-field evolution of radiation emerging from cascaded nonlinear frequency mixing varies from pulse to pulse in the absence of CEP stabilization.
For a broadband driving pulse (Fig. 1, dashed grey curve), the fundamental and cascaded components merge into a continuum (Fig. 1, light-grey and light-red curves). Importantly, the spectral region where the even and odd orders overlap exhibit pronounced interference effects on tuning the CEP of the driving laser (Supplementary Section 6). Shifting the CEP by Δφ = ±π with respect to its reference that yielded the maximum mid-IR intensity (Fig. 1, light-red curve; Δφ = 0) results in the maximum suppression of spectral intensity in this region by destructive interference (Fig. 1, light-grey curve). This change in the spectral distribution of mid-IR radiation underlines the necessity of CEP-stabilized driver light for reproducible multi-octave infrared waveform generation via cascaded second-order nonlinearities.
Single-cycle waveform-stabilized Cr:ZnS laser system
Frequency downconversion into the mid-IR spectral range can be most efficiently driven at the longest possible wavelengths27,28,29,30,31,32,33,34. This also applies to the electro-optic sampling (EOS) of the generated mid-IR fields32. Mode-locked laser oscillators based on Cr-doped II–VI gain media offer ideal driver wavelengths for both purposes, but they have lacked CEP stability so far30,41,42,43.
Here we demonstrate a CEP-stabilized femtosecond Cr:II–VI laser oscillator, with the Cr:ZnS active medium being directly pumped by laser diodes. Femtosecond pulses are generated by Kerr-lens mode locking, yielding 24 nJ pulses with a duration of 28 fs (full-width at half-maximum (FWHM)) at a repetition rate of approximately 23 MHz44.
The output pulses undergo further spectral broadening via self-phase modulation (SPM) in a highly nonlinear bulk dielectric medium (Fig. 2a, TiO2; Methods and Supplementary Section 2) to generate a spectrum spanning from 1.1 µm (272 THz) to 3.2 µm (94 THz) at the −20 dB level (Fig. 2b). Furthermore, despite the strong spectral broadening, the spatial intensity profile of the laser beam remains smooth and Gaussian-like (Fig. 2c, inset) with a laser-beam quality parameter M2 < 1.4 (Supplementary Fig. 2). This value indicates excellent focusability for downstream experiments. The spectrally broadened pulses are temporally compressed in a set of specially designed chirped dielectric multilayer mirrors to a duration of 7.7 fs (FWHM; Fig. 2c), which is equivalent to one optical cycle at the spectral centroid position of 2.24 µm.
The spectrally broadened pulses are subsequently split with an uncoated wedged ZnS beam splitter. The two main reflections off the wedge’s front (48 mW) and back (36 mW) surface are used as a gate pulse for characterizing the mid-IR waveform with EOS (Methods and Supplementary Section 5) and for carrier-envelope offset frequency (fceo) detection, respectively. The fceo beat note is detected in an f–2f interferometer with a 60 dB signal-to-noise ratio (100 kHz resolution bandwidth) and locked to zero via pump-power modulation45. This results in a CEP identical for each laser pulse and continuously tunable by adjusting the feedback loop—a crucial feature for the controlled shaping of mid-IR waveforms generated by cascaded frequency-mixing processes. The CEP noise, measured at the output of the broadening stage (out of the feedback control loop), exhibits a root mean square (r.m.s.) jitter of 11 mrad integrated from 0.001 Hz up to the Nyquist frequency of 11.43 MHz (Fig. 2d, Methods and Supplementary Section 3). This represents one of the highest CEP stabilities ever reported46,47, owing, among others, to the high amplitude stability of the diode-pumped Cr:ZnS laser driver, which yields an integrated relative intensity noise of 0.036% (r.m.s. value, measured between 10 Hz and 1 MHz) after the broadening stage (Fig. 2e). The outstanding stability of the single-cycle near-IR waveforms indicated by these noise figures is the key prerequisite for highly reproducible mid-IR waveform generation.
Controlled single-cycle waveforms in the mid-IR region
The beam traversing the ZnS wedge (Fig. 2a), with an average power of 215 mW, is focused into a 1-mm-thick ZnGeP2 (ZGP) crystal for frequency downconversion via cascaded IPDFG (Methods and Supplementary Section 4). The radiation exiting the nonlinear crystal consists of the field of the transmitted driver pulse as well as the field resulting from the frequency-mixing processes (Fig. 1). The driver field has two orthogonal components of equal magnitude (Methods), one perpendicular and one parallel to the linearly polarized products of the frequency-mixing processes. As a consequence, the mid-IR components originating from IPDFG and the driver components with the same polarization together result in a coherent near-IR-to-mid-IR supercontinuum. Its spectrum was characterized, behind a polarizer, using a monochromator with multiple gratings and a pyroelectric detector (Fig. 3). The generated infrared supercontinuum (Fig. 3, top) spans from 25 THz (12.0 μm) to 330 THz (0.9 μm) at the −30 dB level, equivalent to over 3.7 octaves, limited at both ends by the transmission window of ZGP. This agrees well with our simulations based on the experimental parameters (Fig. 3, bottom).
By locking the CEP of the laser to a value ensuring constructive interference (Δφ = 0) between the cascading orders of the IPDFG process, we maximized the spectral intensity in the region of spectral overlap between the odd and even cascading orders (Fig. 1) from 45 THz (6.7 μm) to about 75 THz (4.0 μm) (Fig. 3, blue solid curve). On changing the CEP of the driver pulse with respect to the (unknown) reference that yielded the maximum mid-IR intensity by Δφ = π, a pronounced dip developed in the overlap region (Fig. 3, orange solid line) due to destructive interference. This effect is also verified by numerical simulations (Fig. 3, bottom). With the beam path purged with nitrogen to reduce ambient absorption, the power of the mid-IR part of the supercontinuum (λ > 3.6 µm, Δφ = 0) is 31 mW (1.3 nJ; Fig. 2a), corresponding to an optical-to-optical conversion efficiency of 14% for the IPDFG process. Furthermore, the corresponding spatial beam profile (Fig. 3, inset) exhibits an excellent mid-IR beam quality.
EOS48 has recently been advanced to optical frequencies of several hundred terahertz49, and hence, it is ideally suited for the direct measurement of electric-field waveforms15,17,18,19,50,51. Using part of the 7.7 fs laser pulses (Fig. 2c) as the gate pulse, we electro-optically sampled the mid-IR part of the supercontinuum generated by cascaded IPDFG in a 0.1-mm-thick GaSe crystal (Methods and Supplementary Fig. 3). The EOS trace—indicative of the actual electric waveform51—exhibits a clean cosine-pulse-like temporal profile for Δφ = 0 (Fig. 4a, blue curve). The main peak coincides with the central peak of the calculated intensity envelope (Fig. 4b, blue curve) and indicates an FWHM pulse duration of 20 fs—equivalent to 0.9 optical cycles at the spectral centroid of 6.6 μm. The full supercontinuum exiting the nonlinear crystal, as measured by the monochromator (Fig. 3), can support even shorter pulses. If needed, appropriate spectral filters will be used to separate and isolate the controllable mid-IR waveforms from their driving fields for spectroscopic applications. Figure 4c (blue curve) shows the spectral intensity obtained by Fourier transforming the measured EOS trace. The resulting spectrum is, as expected, narrower than that measured using a monochromator (Fig. 3), given the EOS detection limit of approximately 100 THz for a gate-pulse duration of 7.7 fs (Fig. 2c).
Most interestingly, the EOS trace can be continuously changed (Fig. 4a) by tuning the relative phase Δφ from 0 to π. The trace is transformed from a clean cosine-pulse-like temporal profile (Δφ = 0) to a sine-like profile (Δφ = 3/6π) and then to a double-pulsed structure (Δφ = π). The evaluation of the intensity envelopes (Fig. 4b) shows that all the measured pulses are temporally well compressed, featuring single to sub-cycle pulse durations. The corresponding spectra (Fig. 4c) exhibit similar spectral characteristics as observed using a monochromator (Fig. 3), however with a dip appearing to be slightly shifted in frequency by 5 THz. This is likely caused by additional nonlinear mixing of the supercontinuum (λ < 3 µm) with the gate pulse in the GaSe detection crystal. Nevertheless, this process is CEP invariant, and the observed changes in the EOS traces for different Δφ values (Fig. 4a) are reproduced by simulations (Supplementary Fig. 4).
Conclusions and outlook
We have reported broadband waveform manipulation in the mid-IR spectral range. Cascaded difference-frequency mixing in a single nonlinear crystal enables waveform adjustment across multiple octaves, without the need for the spatial separation of spectral bands. This monolithic approach to waveform manipulation eliminates instabilities originating from beam-pointing fluctuations and timing jitter inherent in multiple-channel schemes for multi-octave synthesis14. With the control parameter being the CEP of the driver laser pulse, no additional dispersive material is required in the mid-IR beam path to manipulate the waveform. As a result, temporal confinement close to a single-field cycle can be preserved for different waveforms without demanding multi-octave dispersion management. For these reasons, the generated waveforms are inherently robust, with their reproducibility solely depending on that of the driver waveform.
The fidelity of the reported mid-IR waveforms benefits from the unprecedented CEP and amplitude stability and the resultant reproducibility of single-cycle waveforms of our diode-pumped Cr:ZnS oscillator-based source. The 1.7 MW peak power of these waveforms can be boosted beyond the 10 MW level without substantial added noise by diode-pumped Cr:ZnS amplifiers52. The higher peak intensity allows the use of nonlinear crystals with lower nonlinear coefficients but broader window of transparency for extending the mid-IR continuum towards the low-terahertz regime34. It also extends the SPM-generated near-IR continuum towards the visible, yielding few-femtosecond pulses for EOS of the entire 300 THz infrared supercontinuum demonstrated49.
These advances offer technical capabilities unavailable to date. They include the temporal confinement of coherent multi-octave infrared light to sub-cycle transients of several femtosecond duration and—by introducing more control parameters (for example, via spectral manipulation of the driver waveform)—the sculpting of waveforms with sub-femtosecond-scale precision. Multi-octave infrared-field synthesis can probably impact research at several frontiers, including the advancement of electronic signal processing7,8,9,10 and electric-field-resolved molecular fingerprinting of biological systems23.
Methods
CEP locking
The detection of fceo was performed in a common-path f–2f interferometer around 1,230 nm with a periodically poled lithium niobate crystal serving as a nonlinear medium for second-harmonic generation. For CEP stabilization (that is, setting fceo = 0), we adopted a self-referenced locking concept45 combined with an active phase control realized via current modulation of the laser pump diode. An additional CaF2 wedge pair was implemented at the input of the interferometer, enabling to set the arbitrary operation point of the locking loop and hence tune the CEP on demand within the full phase range without introducing any chirp in the mid-IR waveform. The out-of-loop CEP stability was investigated in a second f–2f interferometer with the gate beam as the input.
Nonlinear crystals
For nonlinear spectral broadening, the output of the laser oscillator is tightly focused (Ø = 20 µm) into a 0.5-mm-thick bulk rutile (TiO2) plate to induce SPM. To enhance transmission through TiO2 and suppress birefringent effects, the plate was coated with an anti-reflection material for the spectral range of 1.2–3.2 µm and cut in the (001) orientation to be used at normal incidence.
In the IPDFG stage, a 1-mm-thick ZGP crystal is used in the type I phase-matching configuration (θ = 51°, φ = 0°). To achieve this, a half-wave plate is needed to rotate the polarization of the driving pulses to feature two orthogonal field components of equal magnitude. A peak intensity of 150 GW cm–2 allows for an efficient nonlinear conversion into the mid-IR spectral region.
Waveform characterization
To trace the changes in the mid-IR waveform caused by the change in the CEP of the driving laser, the method of EOS48,53 is utilized under a nitrogen-purged environment. The gate beam and mid-IR beam are combined using a ZnS wedge (Fig. 2a). Subsequently, they are focused into a 0.1-mm-thick GaSe detection crystal, where we employ type I phase matching (φ = 30°) at an external angle of θ = 35°. Therefore, the sum frequency of the two pulses is generated, resulting in an effective polarization rotation of the gate pulse, which is proportional to the electric field of the mid-IR range. This polarization rotation is analysed with an ellipsometer comprising a quarter-wave plate, a Wollaston prism and a balanced detection scheme. By varying the time delay between the gate and mid-IR pulses using an electronic stage, we can obtain a trace indicative of the mid-IR waveform.
Data availability
The datasets generated during and/or analysed in this study are available from the corresponding authors upon reasonable request.
Code availability
The codes that support this study are available from the corresponding authors upon reasonable request.
References
Brabec, T. & Krausz, F. Intense few-cycle laser fields: frontiers of nonlinear optics. Rev. Mod. Phys. 72, 545–591 (2000).
Baltuška, A. et al. Attosecond control of electronic processes by intense light fields. Nature 421, 611–615 (2003).
Kienberger, R. et al. Atomic transient recorder. Nature 427, 817–821 (2004).
Luu, T. T. et al. Extreme ultraviolet high-harmonic spectroscopy of solids. Nature 521, 498–502 (2015).
Langer, F. et al. Symmetry-controlled temporal structure of high-harmonic carrier fields from a bulk crystal. Nat. Photon. 11, 227–231 (2017).
Ghimire, S. & Reis, D. A. High-harmonic generation from solids. Nat. Phys. 15, 10–16 (2019).
Schiffrin, A. et al. Optical-field-induced current in dielectrics. Nature 493, 70–74 (2013).
Higuchi, T., Heide, C., Ullmann, K., Weber, H. B. & Hommelhoff, P. Light-field-driven currents in graphene. Nature 550, 224–228 (2017).
Vampa, G. et al. Strong-field optoelectronics in solids. Nat. Photon. 12, 465–468 (2018).
Rybka, T. et al. Sub-cycle optical phase control of nanotunnelling in the single-electron regime. Nat. Photon. 10, 667–670 (2016).
Ludwig, M. et al. Sub-femtosecond electron transport in a nanoscale gap. Nat. Phys. 16, 341–345 (2020).
Dombi, P. et al. Strong-field nano-optics. Rev. Mod. Phys. 92, 025003 (2020).
Hanus, V. et al. Light-field-driven current control in solids with pJ-level laser pulses at 80 MHz repetition rate. Optica 8, 570–576 (2021).
Manzoni, C. et al. Coherent pulse synthesis: towards sub-cycle optical waveforms. Laser Photonics Rev. 9, 129–171 (2015).
Langer, F. et al. Lightwave-driven quasiparticle collisions on a subcycle timescale. Nature 533, 225–229 (2016).
Reimann, J. et al. Subcycle observation of lightwave-driven Dirac currents in a topological surface band. Nature 562, 396–400 (2018).
Langer, F. et al. Lightwave valleytronics in a monolayer of tungsten diselenide. Nature 557, 76–80 (2018).
Cocker, T. L., Peller, D., Yu, P., Repp, J. & Huber, R. Tracking the ultrafast motion of a single molecule by femtosecond orbital imaging. Nature 539, 263–267 (2016).
Peller, D. et al. Sub-cycle atomic-scale forces coherently control a single-molecule switch. Nature 585, 58–62 (2020).
Fischer, M. P. et al. Field-resolved detection of the temporal response of a single plasmonic antenna in the mid-infrared. Optica 8, 898–903 (2021).
Coddington, I., Swann, W. C. & Newbury, N. R. Time-domain spectroscopy of molecular free-induction decay in the infrared. Opt. Lett. 35, 1395–1397 (2010).
Kowligy, A. S. et al. Infrared electric field sampled frequency comb spectroscopy. Sci. Adv. 5, eaaw8794 (2019).
Pupeza, I. et al. Field-resolved infrared spectroscopy of biological systems. Nature 577, 52–59 (2020).
Junginger, F. et al. Single-cycle multiterahertz transients with peak fields above 10 MV/cm. Opt. Lett. 35, 2645–2647 (2010).
Fuji, T. & Nomura, Y. Generation of phase-stable sub-cycle mid-infrared pulses from filamentation in nitrogen. Appl. Sci. 3, 122–138 (2013).
Liang, H. et al. High-energy mid-infrared sub-cycle pulse synthesis from a parametric amplifier. Nat. Commun. 8, 141 (2017).
Zhang, J. et al. Multi-mW, few-cycle mid-infrared continuum spanning from 500 to 2250 cm−1. Light Sci. Appl. 7, 17180 (2018).
Gaida, C. et al. Watt-scale super-octave mid-infrared intrapulse difference frequency generation. Light Sci. Appl. 7, 94 (2018).
Novák, O. et al. Femtosecond 8.5 µm source based on intrapulse difference-frequency generation of 2.1 µm pulses. Opt. Lett. 43, 1335–1338 (2018).
Vasilyev, S. et al. Super-octave longwave mid-infrared coherent transients produced by optical rectification of few-cycle 2.5-μm pulses. Optica 6, 111–114 (2019).
Wang, Q. et al. Broadband mid-infrared coverage (2–17 μm) with few-cycle pulses via cascaded parametric processes. Opt. Lett. 44, 2566–2569 (2019).
Butler, T. P. et al. Multi-octave spanning, Watt-level ultrafast mid-infrared source. J. Phys. Photonics 1, 044006 (2019).
Lesko, D. M. B. et al. A six-octave optical frequency comb from a scalable few-cycle erbium fibre laser. Nat. Photon. 15, 281–286 (2021).
Elu, U. et al. Seven-octave high-brightness and carrier-envelope-phase-stable light source. Nat. Photon. 15, 277–280 (2021).
Cartella, A. et al. Pulse shaping in the mid-infrared by a deformable mirror. Opt. Lett. 39, 1485–1488 (2014).
Jakob, M. A. et al. Generation and characterization of tailored MIR waveforms for steering molecular dynamics. Opt. Express 27, 26979–26988 (2019).
Eickemeyer, F., Kaindl, R. A., Woerner, M., Elsaesser, T. & Weiner, A. M. Controlled shaping of ultrafast electric field transients in the mid-infrared spectral range. Opt. Lett. 25, 1472–1474 (2000).
Witte, T., Kompa, K. L. & Motzkus, M. Femtosecond pulse shaping in the mid infrared by difference-frequency mixing. Appl. Phys. B 76, 467–471 (2003).
Krogen, P. et al. Generation and multi-octave shaping of mid-infrared intense single-cycle pulses. Nat. Photon. 11, 222–226 (2017).
Kessel, A. et al. Generation of multi-octave spanning high-energy pulses by cascaded nonlinear processes in BBO. Opt. Express 24, 5628–5637 (2016).
Mirov, S. B. et al. Frontiers of mid-IR lasers based on transition metal doped chalcogenides. IEEE J. Sel. Topics Quantum Electron. 24, 1–29 (2018).
Vasilyev, S. et al. Middle-IR frequency comb based on Cr:ZnS laser. Opt. Express 27, 35079–35087 (2019).
Nagl, N. et al. Directly diode-pumped, Kerr-lens mode-locked, few-cycle Cr:ZnSe oscillator. Opt. Express 27, 24445–24454 (2019).
Nagl, N., Pervak, V., Krausz, F. & Mak, K. F. Milliwatt-level multi-octave mid-infrared generation by a diode-pumped Cr:ZnS oscillator. In 2021 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference cf_6_1 (Optica Publishing Group, 2021).
Okubo, S., Onae, A., Nakamura, K., Udem, T. & Inaba, H. Offset-free optical frequency comb self-referencing with an f-2f interferometer. Optica 5, 188–192 (2018).
Liao, R. et al. Active f-to-2f interferometer for record-low jitter carrier-envelope phase locking. Opt. Lett. 44, 1060–1063 (2019).
Lemons, R. et al. Carrier-envelope phase stabilization of an Er:Yb:glass laser via a feed-forward technique. Opt. Lett. 44, 5610–5613 (2019).
Wu, Q. & Zhang, X.-C. Free-space electro-optics sampling of mid-infrared pulses. Appl. Phys. Lett. 71, 1285–1286 (1997).
Keiber, S. et al. Electro-optic sampling of near-infrared waveforms. Nat. Photon. 10, 159–162 (2016).
Riek, C. et al. Direct sampling of electric-field vacuum fluctuations. Science 350, 420–423 (2015).
Sulzer, P. et al. Determination of the electric field and its Hilbert transform in femtosecond electro-optic sampling. Phys. Rev. A 101, 033821 (2020).
Qu, S. et al. 1.5-W diode-pumped femtosecond Cr:ZnS amplifier. In 2021 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference 1 (IEEE, 2021).
Hofer, C. et al. Quantum-efficiency and bandwidth optimized electro-optic sampling. In 2019 Conference on Lasers and Electro-Optics Europe European Quantum Electronics Conference (CLEO/Europe-EQEC) cf_p_15 (Optica Publishing Group, 2019).
Acknowledgements
This work was funded by the Center for Molecular Fingerprinting Research (CMF), the Center for Advanced Laser Applications (CALA) of the Ludwig-Maximilians-Universität München, Department of Laser Physics, and the Max Planck Institute of Quantum Optics (MPQ), Laboratory for Attosecond Physics, Germany. J.S. thanks the ‘NLPQT—National Laboratory for Photonics and Quantum Technologies’ (Poland) for providing the vector network analyser to test the low-noise laser diode driver performance. We thank I. Pupeza for valuable discussions, D. Gerz for assistance in the pulse characterization and M. Kling for feedback on the manuscript.
Funding
Open access funding provided by Max Planck Society.
Author information
Authors and Affiliations
Contributions
The research was initiated by F.K. and led by K.F.M. F.K., K.F.M., P.S., N.N. and M.K. planned and designed the study, with contributions from A.W. and J.Z. P.S., N.N. and M.K. performed the experiments and analysed the data, with contributions from C.H. and A.W. V.P. developed the dispersive multilayer mirrors. A.H. and J.S. developed a low-noise laser diode driver for CEP locking. K.F.M., F.K., P.S., N.N. and M.K. wrote the manuscript. All the authors read and finalized the manuscript.
Corresponding authors
Ethics declarations
Competing interests
P.S., N.N., M.K., A.W., F.K. and K.F.M. have filed patent application(s) on some aspects of the presented work. The remaining authors declare no competing interests.
Peer review
Peer review information
Nature Photonics thanks Daniele Brida, Peter Dombi, Kyung-Han Hong and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary Figs. 1–5 and Sections 1–7.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Steinleitner, P., Nagl, N., Kowalczyk, M. et al. Single-cycle infrared waveform control. Nat. Photon. 16, 512–518 (2022). https://doi.org/10.1038/s41566-022-01001-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41566-022-01001-2
This article is cited by
-
Petahertz electronics
Nature Reviews Physics (2024)
-
Maximizing the efficiency of intrapulse difference frequency generation by pulse shaping and recycling
Applied Physics B (2024)
-
Broadband mid-infrared waveform generation
Nature Photonics (2022)