Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration

Abstract

Hybrid photonic integration combines complementary advantages of different material platforms, offering superior performance and flexibility compared with monolithic approaches. This applies in particular to multi-chip concepts, where components can be individually optimized and tested. The assembly of such systems, however, requires expensive high-precision alignment and adaptation of optical mode profiles. We show that these challenges can be overcome by in situ printing of facet-attached beam-shaping elements. Our approach allows precise adaptation of vastly dissimilar mode profiles and permits alignment tolerances compatible with cost-efficient passive assembly techniques. We demonstrate a selection of beam-shaping elements at chip and fibre facets, achieving coupling efficiencies of up to 88% between edge-emitting lasers and single-mode fibres. We also realize printed free-form mirrors that simultaneously adapt beam shape and propagation direction, and we explore multi-lens systems for beam expansion. The concept paves the way to automated assembly of photonic multi-chip systems with unprecedented performance and versatility.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Photonic multi-chip assembly combining the distinct advantages of different photonic integration platforms.
Fig. 2: Artist’s view and experimental realizations of various beam-shaping elements that can be used as universal building blocks for hybrid photonic multi-chip systems.
Fig. 3: Coupling of edge-emitting DFB lasers to SMFs.
Fig. 4: Coupling experiments of optical components equipped with free-form mirrors.
Fig. 5: Coupling experiments using beam expanders on lasers and waveguides.
Fig. 6: Coupling experiments using expanders for relaxing alignment tolerances.

Similar content being viewed by others

References

  1. Baehr-Jones, T. et al. Myths and rumours of silicon photonics. Nat. Photon. 6, 206–208 (2012).

    Article  ADS  Google Scholar 

  2. O’Brien, P., Carroll, L., Eason, C. & Lee, J. S. Silicon Photonics III Ch. 7 (Springer, Berlin Heidelberg, 2016).

  3. Lee, J. S. et al. Meeting the electrical, optical, and thermal design challenges of photonic-packaging. IEEE J. Sel. Top. Quantum Electron. 22, 409–417 (2016).

    Article  Google Scholar 

  4. Pezeshki, B. et al. High performance MEMS-based micro-optic assembly for multi-lane transceivers. J. Light. Technol. 32, 2796–2799 (2014).

    Article  ADS  Google Scholar 

  5. Tian, Z.-N. et al. Beam shaping of edge-emitting diode lasers using a single double-axial hyperboloidal micro-lens. Opt. Lett. 38, 5414–5417 (2013).

    Article  ADS  Google Scholar 

  6. Scarcella, C. et al. Pluggable single-mode fiber-array-to-PIC coupling using micro-lenses. IEEE Photon. Technol. Lett. 29, 1943–1946 (2017).

    Article  ADS  Google Scholar 

  7. Snyder, B., Corbett, B. & O’Brien, P. Hybrid integration of the wavelength-tunable laser with a silicon photonic integrated circuit. J. Light. Technol. 31, 3934–3942 (2013).

    Article  ADS  Google Scholar 

  8. Doany, F. E. et al. Multichannel high-bandwidth coupling of ultradense silicon photonic waveguide array to standard-pitch fiber array. J. Light. Technol. 29, 475–482 (2011).

    Article  ADS  Google Scholar 

  9. Taillaert, D. et al. An out-of-plane grating coupler for efficient butt-coupling between compact planar waveguides and single-mode fibers. IEEE J. Quantum Electron. 38, 949–955 (2002).

    Article  ADS  Google Scholar 

  10. Taillaert, D. et al. A compact two-dimensional grating coupler used as a polarization splitter. IEEE Photon. Technol. Lett. 15, 1249–1251 (2003).

    Article  ADS  Google Scholar 

  11. Snyder, B. & O’Brien, P. Packaging process for grating-coupled silicon photonic waveguides using angle-polished fibers. IEEE Trans. Compon. Packag. Manuf. Technol. 3, 954–959 (2013).

    Article  Google Scholar 

  12. Li, C. et al. Silicon photonics packaging with lateral fiber coupling to apodized grating coupler embedded circuit. Opt. Express 22, 24235–24240 (2014).

    Article  ADS  Google Scholar 

  13. Song, J. H., Fernando, H. N. J., Roycroft, B., Corbett, B. & Peters, F. H. Practical design of lensed fibers for semiconductor laser packaging using laser welding technique. J. Light. Technol. 27, 1533–1539 (2009).

    Article  ADS  Google Scholar 

  14. Kopp, C. et al. Silicon photonic circuits: on-CMOS integration, fiber optical coupling, and packaging. IEEE J. Sel. Top. Quantum Electron. 17, 498–509 (2010).

    Article  Google Scholar 

  15. Edwards, C. A., Presby, H. M. & Dragone, C. Ideal microlenses for laser to fiber coupling. J. Light. Technol. 11, 252–257 (1993).

    Article  ADS  Google Scholar 

  16. Yeh, S.-M., Huang, S.-Y. & Cheng, W.-H. A new scheme of conical-wedge-shaped fiber endface for coupling between high-power laser diodes and single-mode fibers. J. Light. Technol. 23, 1781–1786 (2005).

    Article  ADS  Google Scholar 

  17. He, M., Yuan, X.-C., Ngo, N. Q., Bu, J. & Tao, S. H. Low-cost and efficient coupling technique using reflowed sol-gel microlens. Opt. Express 11, 1621–1627 (2003).

    Article  ADS  Google Scholar 

  18. Pavarelli, N. et al. Optical and electronic packaging processes for silicon photonic systems. J. Light. Technol. 33, 991–997 (2015).

    Article  ADS  Google Scholar 

  19. Fijol, J. J. et al. Fabrication of silicon-on-insulator adiabatic tapers for low-loss optical interconnection of photonic devices. In Photonics Packaging and Integration III 157–170 (International Society for Optics and Photonics, 2003).

  20. Modavis, R. A. & Webb, T. W. Anamorphic microlens for laser diode to single-mode fiber coupling. IEEE Photon. Technol. Lett. 7, 798–800 (1995).

    Article  ADS  Google Scholar 

  21. Fang, Q. et al. Low loss fiber-to-waveguide converter with a 3-D functional taper for silicon photonics. IEEE Photon. Technol. Lett. 28, 2533–2536 (2016).

    Article  ADS  Google Scholar 

  22. Dangel, R. et al. Polymer waveguides for electro-optical integration in data centers and high-performance computers. Opt. Express 23, 4736–4750 (2015).

    Article  ADS  Google Scholar 

  23. Kawata, S., Sun, H.-B., Tanaka, T. & Takada, K. Finer features for functional microdevices. Nature 412, 697–698 (2001).

    Article  ADS  Google Scholar 

  24. Maruo, S., Nakamura, O. & Kawata, S. Three-dimensional microfabrication with two-photon-absorbed photopolymerization. Opt. Lett. 22, 132–134 (1997).

    Article  ADS  Google Scholar 

  25. Deubel, M. et al. Direct laser writing of three-dimensional photonic-crystal templates for telecommunications. Nat. Mater. 3, 444–447 (2004).

    Article  ADS  Google Scholar 

  26. Malinauskas, M. et al. Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization. J. Opt. 12, 124010 (2010).

    Article  ADS  Google Scholar 

  27. Cojoc, G. et al. Optical micro-structures fabricated on top of optical fibers by means of two-photon photopolymerization. Microelectron. Eng. 87, 876–879 (2010).

    Article  Google Scholar 

  28. Gissibl, T., Thiele, S., Herkommer, A. & Giessen, H. Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres. Nat. Commun. 7, 11763 (2016).

    Article  ADS  Google Scholar 

  29. Gissibl, T., Thiele, S., Herkommer, A. & Giessen, H. Two-photon direct laser writing of ultracompact multi-lens objectives. Nat. Photon. 10, 554–560 (2016).

    Article  ADS  Google Scholar 

  30. Thiele, S., Gissibl, T., Giessen, H. & Herkommer, A. M. Ultra-compact on-chip LED collimation optics by 3D femtosecond direct laser writing. Opt. Lett. 41, 3029–3032 (2016).

    Article  ADS  Google Scholar 

  31. Dietrich, P.-I. et al. Lenses for low-loss chip-to-fiber and fiber-to-fiber coupling fabricated by 3D direct-write lithography. In Conference on Lasers and Electro-Optics SM1G.4 (OSA, 2016).

  32. Schneider, S. et al. Optical coherence tomography system mass-producible on a silicon photonic chip. Opt. Express 24, 1573–1586 (2016).

    Article  ADS  Google Scholar 

  33. Wörhoff, K., Heideman, R. G., Leinse, A. & Hoekman, M. TriPleX: a versatile dielectric photonic platform. Adv. Opt. Technol. 4, 189–207 (2015).

    ADS  Google Scholar 

  34. Lamprecht, T. et al. Passive alignment of optical elements in a printed circuit board. In Electronic Components and Technology Conference 761–767 (IEEE, 2006).

  35. Fu, Y., Bryan, N. K. A. & Shing, O. N. Integrated micro-cylindrical lens with laser diode for single-mode fiber coupling. IEEE Photon. Technol. Lett. 12, 1213–1215 (2000).

    Article  ADS  Google Scholar 

  36. Moehrle, M. et al. Ultra-low threshold 1490 nm surface-emitting BH-DFB laser diode with integrated monitor photodiode. In 22nd International Conference on Indium Phosphide and Related Materials 1–4 (IEEE, 2010).

  37. Suzuki, T. et al. Cost-effective optical sub-assembly using lens-integrated surface-emitting laser. J. Light. Technol. 34, 358–364 (2015).

    Article  Google Scholar 

  38. Amann, M.-C. & Hofmann, W. InP-based long-wavelength VCSELs and VCSEL arrays. IEEE J. Sel. Top. Quantum Electron. 15, 861–868 (2009).

    Article  Google Scholar 

  39. Mack, M. et al. Method and system for a light source assembly supporting direct coupling to an integrated circuit. US patent 8772704 B2 (2008).

  40. Preve, G. B. Silicon Photonics III Ch. 8 (Springer, Berlin Heidelberg, 2016).

  41. Kowalczyk, M., Haberko, J. & Wasylczyk, P. Microstructured gradient-index antireflective coating fabricated on a fiber tip with direct laser writing. Opt. Express 22, 12545–12550 (2014).

    Article  ADS  Google Scholar 

  42. Li, Z. et al. Silyl-based initiators for two-photon polymerization: from facile synthesis to quantitative structure–activity relationship analysis. Polym. Chem. 8, 6644–6653 (2017).

    Article  Google Scholar 

Download references

Acknowledgements

We thank P. Trocha for help with the high-power measurements, M. Hummel for fabricating mechanical setups, O. Speck for fibre preparation, F. Rupp and P. Abaffy for recording SEM images, S. Dottermusch for the absorption measurements, G. Göring and N. Schneider for the AFM measurements, and K. Wörhoff and A. Leinse, both at LioniX BV, for TriPleX chips. This work was supported by the Bundesministerium für Bildung und Forschung (BMBF) Project PHOIBOS (Grant 13N12574) and PRIMA (13N14629 and 13N14630), the Helmholtz International Research School for Teratronics (HIRST), the European Research Council (ERC Starting Grant ‘EnTeraPIC’, # 280145), the H2020 Photonic Packaging Pilot Line PIXAPP (# 731954), the EU-FP7 project BigPipes, the Alfried Krupp von Bohlen und Halbach Foundation, the Karlsruhe Nano-Micro Facility (KNMF) and the Deutsche Forschungsgemeinschaft (DFG, 1173). P.-I.D. acknowledges support from the IBM PhD Fellowship Program.

Author information

Authors and Affiliations

Authors

Contributions

P.-I.D. designed, simulated, fabricated and characterized coupling structures and devices with help from M.Bl., I.R., M.Bi., T.H. and A.H., supervised by C.K. M.Bl. supplied advanced tools and techniques for 3D printing. M.Bi. and T.H. supported fabrication and measurement of test structures. C.C., R.D. and B.O. contributed to fabrication of test chips elements. U.T. and M.M. contributed InP-based components. Device concepts and coupling schemes were jointly conceived by P.-I.D., M.Bl., R.D., B.O. and C.K. All authors discussed the data. The project was supervised by W.F. and C.K. The manuscript was written by P.-I.D., W.F. and C.K.

Corresponding authors

Correspondence to P.-I. Dietrich or C. Koos.

Ethics declarations

Competing interests

P.-I.D. and C.K. are co-founders and shareholders of Vanguard Photonics GmbH, a start-up company engaged in exploiting 3D nanoprinting in the field of photonic integration and assembly. P.-I.D., M.B., I.R. and C.K. are co-inventors of patents owned by Karlsruhe Institute of Technology (KIT) in the technical field of the publication.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Supplementary Information

This file contains details on the determination of surface roughness by atomic force microscopy, coupling experiments with facet-attached lenses, coupling to TriPleX chips, reproducibility and accuracy.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Dietrich, PI., Blaicher, M., Reuter, I. et al. In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration. Nature Photon 12, 241–247 (2018). https://doi.org/10.1038/s41566-018-0133-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41566-018-0133-4

This article is cited by

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing