Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Mechanically robust lattices inspired by deep-sea glass sponges

Abstract

The predominantly deep-sea hexactinellid sponges are known for their ability to construct remarkably complex skeletons from amorphous hydrated silica. The skeletal system of one such species of sponge, Euplectella aspergillum, consists of a square-grid-like architecture overlaid with a double set of diagonal bracings, creating a chequerboard-like pattern of open and closed cells. Here, using a combination of finite element simulations and mechanical tests on 3D-printed specimens of different lattice geometries, we show that the sponge’s diagonal reinforcement strategy achieves the highest buckling resistance for a given amount of material. Furthermore, using an evolutionary optimization algorithm, we show that our sponge-inspired lattice geometry approaches the optimum material distribution for the design space considered. Our results demonstrate that lessons learned from the study of sponge skeletal systems can be exploited for the realization of square lattice geometries that are geometrically optimized to avoid global structural buckling, with implications for improved material use in modern infrastructural applications.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Representative skeletal system of the hexactinellid sponge Euplectella aspergillum.
Fig. 2: Experimental and numerical results.
Fig. 3: Numerical results describing structural response to varying loading angle.
Fig. 4: Optimization results and experimental validation.
Fig. 5: Numerical and experimental results of slender structures undergoing 3-point bending tests.

Data availability

Raw data for the plots are available on GitHub at http://fer.me/sponge-structure. Additional data that support the findings of this study are available from the corresponding authors on request.

Code availability

All codes necessary to reproduce results in main paper are available on GitHub at http://fer.me/sponge-structure.

References

  1. Schulze, F. E. Report on the hexactinellida collected by H.M.S. Challenger during the years 1873–76. In Report on the Scientific Results of the Voyage of H.M.S. Challenger During the Years 1873–76 (eds Thomson, C. W. & Murray, J.) Zoology Vol. 21, 1–513 (Neill and Co., 1887).

  2. Aizenberg, J. et al. Skeleton of Euplectella sp.: structural hierarchy from the nanoscale to the macroscale. Science 309, 275–278 (2005).

    Article  CAS  Google Scholar 

  3. Weaver, J. C. et al. Unifying design strategies in demosponge and hexactinellid skeletal systems. J. Adhes. 86, 72–95 (2010).

    Article  CAS  Google Scholar 

  4. Miserez, A. et al. Effects of laminate architecture on fracture resistance of sponge biosilica: lessons from nature. Adv. Funct. Mater. 18, 1241–1248 (2008).

    Article  CAS  Google Scholar 

  5. Monn, M. A., Weaver, J. C., Zhang, T., Aizenberg, J. & Kesari, H. New functional insights into the internal architecture of the laminated anchor spicules of Euplectella aspergillum. Proc. Natl Acad. Sci. USA 112, 4976–4981 (2015).

    Article  CAS  Google Scholar 

  6. Schaedler, T. A. et al. Ultralight metallic microlattices. Science 334, 962–965 (2011).

    Article  CAS  Google Scholar 

  7. Ashby, M. F. The properties of foams and lattices. Phil. Trans. R. Soc. Lond. A 364, 15–30 (2006).

    CAS  Google Scholar 

  8. Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F. & Wadley, H. N. G. The topological design of multifunctional cellular metals. Prog. Mater. Sci. 46, 309–327 (2001).

    Article  CAS  Google Scholar 

  9. Phani, A. S., Woodhouse, J. & Fleck, N. A. Wave propagation in two-dimensional periodic lattices. J. Acoust. Soc. Am. 119, 1995–2005 (2006).

    Article  Google Scholar 

  10. Lu, T. J., Stone, H. A. & Ashby, M. F. Heat transfer in open-cell metal foams. Acta Mater. 46, 3619–3635 (1998).

    Article  CAS  Google Scholar 

  11. Ashby, M. F., Seymour, C. J. & Cebon, D. Metal Foams and Honeycombs Database (Granta Design, 1997).

  12. Evans, A. G., Hutchinson, J. W. & Ashby, M. F. Multifunctionality of cellular metal systems. Prog. Mater. Sci. 43, 171–221 (1998).

    Article  CAS  Google Scholar 

  13. Deshpande, V. S., Ashby, M. F. & Fleck, N. A. Foam topology: bending versus stretching dominated architectures. Acta Mater. 49, 1035–1040 (2001).

    Article  CAS  Google Scholar 

  14. Gibson, L. J. & Ashby, M. F. Cellular Solids: Structure and Properties (Cambridge Univ. Press, 1999).

  15. Phani, A. S. & Hussein, M. I. Dynamics of Lattice Materials (John Wiley & Sons, 2017).

  16. Danielsson, M., Parks, D. M. & Boyce, M. C. Three-dimensional micromechanical modeling of voided polymeric materials. J. Mech. Phys. Solids 50, 351–379 (2002).

    Article  CAS  Google Scholar 

  17. Bertoldi, K. & Boyce, M. C. Mechanically triggered transformations of phononic band gaps in periodic elastomeric structures. Phys. Rev. B 77, 052105 (2008).

    Article  Google Scholar 

  18. Hansen, N., Akimoto, Y. & Baudis, P. CMA-ES/pycma: r3.0.3. https://doi.org/10.5281/zenodo.2559634 (2019).

  19. Horne, M. R. & Merchant, W. The Stability of Frames (Elsevier, 1965).

  20. Schulze, F. E. Hexactinellida. In Scientific Results of the German Deep-Sea Expedition with the Steamboat, Valdivia 1898–1899 (ed. Chun, C.) (Gustav Fischer, 1904).

  21. Saito, T., Uchida, I. & Takeda, M. Skeletal growth of the deep-sea hexactinellid sponge Euplectella oweni, and host selection by the symbiotic shrimp Spongicola japonica (crustacea: Decapoda: Spongicolidae). J. Zool. 258, 521–529 (2002).

    Article  Google Scholar 

  22. Walter, S. L., Flinn, B. D. & Mayer, G. Mechanisms of toughening of a natural rigid composite. Mater. Sci. Eng. C 27, 570–574 (2007).

    Article  CAS  Google Scholar 

  23. Monn, M. A., Vijaykumar, K., Kochiyama, S. & Kesari, H. Lamellar architectures in stiff biomaterials may not always be templates for enhancing toughness in composites. Nat. Commun. 11, 373 (2020).

    Article  CAS  Google Scholar 

  24. Woesz, A. et al. Micromechanical properties of biological silica in skeletons of deep-sea sponges. J. Mater. Res. 21, 2068–2078 (2006).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was supported by NSF-GRFP Fellowship Grant Number DGE-1144152 (M.C.F.), a GEM Consortium Fellowship (M.C.F.) and the Harvard Graduate Prize Fellowship (M.C.F.), and was partially supported by the NSF through the Harvard University Materials Research Science and Engineering Center Grant Number DMR-2011754 and NSF DMREF Grant Number DMR-1922321. We also thank J. R. Rice, J. W. Hutchinson, F. H. Abernathy, J. Vlassak, S. Gerasimidis and C. Rycroft for discussions.

Author information

Authors and Affiliations

Authors

Contributions

All authors secured research funding. K.B. and J.C.W. supervised the research. M.C.F. and J.C.W. generated models and performed mechanical testing and finite element simulations. M.C.F., K.B. and J.C.W. analysed the data. All authors wrote the paper.

Corresponding authors

Correspondence to James C. Weaver or Katia Bertoldi.

Ethics declarations

Competing interests

The authors would like to disclose a submitted patent application on related geometric features reported in this manuscript. United States Patent and Trademark Office (USPTO) (RO/US) application number: 002806-094100WOPT filed in 2019. Patent applicant: President and Fellows of Harvard College. Inventors: Matheus C. Fernandes, James C. Weaver, and Katia Bertoldi. The authors declare no further competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Figs. 1–27, Tables 1–3 and Sections 1–5.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Fernandes, M.C., Aizenberg, J., Weaver, J.C. et al. Mechanically robust lattices inspired by deep-sea glass sponges. Nat. Mater. 20, 237–241 (2021). https://doi.org/10.1038/s41563-020-0798-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41563-020-0798-1

This article is cited by

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing