Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Dimensionally and environmentally ultra-stable polymer composites reinforced with carbon fibres

A Publisher Correction to this article was published on 11 February 2020

A Publisher Correction to this article was published on 13 January 2020

This article has been updated

Abstract

The quest to develop materials that enable the manufacture of dimensionally ultra-stable structures for critical-dimension components in spacecraft has led to much research over many decades and the evolution of carbon fibre reinforced polymer materials. This has resulted in structural designs that feature a near-zero coefficient of thermal expansion. However, the dimensional instabilities that result from moisture ingression and release remain the fundamental vulnerability of the matrix, which restricts many applications. Here, we address this challenge by developing a space-qualifiable physical surface barrier that blends within the mechanical properties of the composite, thus becoming part of the composite itself. The resulting enhanced composite features mechanical integrity and a strength that is superior to the underlying composite, while remaining impervious to moisture and outgassing. We demonstrate production capability for a model-sized component for the Sentinel-5 mission and demonstrate such capability for future European Space Agency (ESA) and National Aeronautics and Space Administration (NASA) programmes such as Copernicus Extension, Earth Explorer and Science Cosmic Visions.

Access options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

Fig. 1: Challenges associated with material selection for ultra-stable space structures.
Fig. 2: Stress modelling within CFRP and coated components.
Fig. 3: Structural characterization and moisture barrier enhancement of CFRP.
Fig. 4: Adhesion and surface properties characterization of BECFRP.
Fig. 5: Optical enhancement of BECFRP.

Data availability

The data that support the findings of this study are available in Figshare with the identifier https://doi.org/10.15126/surreydata.c.4609958.

Change history

References

  1. 1.

    Ghidini, T. Materials for space exploration and settlement. Nat. Mater. 17, 846–850 (2018).

    CAS  Article  Google Scholar 

  2. 2.

    Rudolph, H. Some aspects of the future course of polymer research in industry. Polymer J. 17, 13–27 (1985).

    CAS  Article  Google Scholar 

  3. 3.

    Butler, D. Earth observation enters next phase. Nat. News 508, 160 (2014).

    CAS  Article  Google Scholar 

  4. 4.

    Reichhardt, T. NASA roadmap charts route to a quarter-century of exploration. Nature 420, 593–594 (2002).

    CAS  Article  Google Scholar 

  5. 5.

    Sanderson, K. Astronomers unveil wish list. Nature 456, 427–428 (2008).

    Article  Google Scholar 

  6. 6.

    Gondoin, P. Astronomical opportunities. Nat. Photon. 1, 605–607 (2007).

    CAS  Article  Google Scholar 

  7. 7.

    Battersby, C. et al. The origins space telescope. Nat. Astronomy 2, 596–599 (2018).

    Article  Google Scholar 

  8. 8.

    Growing pains. Nat. Astron. 2, 691 (2018).

  9. 9.

    Gibney, E. X-rays top space agenda. Nat. News 503, 7474 (2013).

    Google Scholar 

  10. 10.

    Burnol, A. et al. Wavelet-based analysis of ground deformation coupling satellite acquisitions (Sentinel-1, SMOS) and data from shallow and deep wells in southwestern France. Sci. Rep. 9, 8812 (2019).

    Article  Google Scholar 

  11. 11.

    Raspini, F. et al. Continuous, semi-automatic monitoring of ground deformation using Sentinel-1 satellites. Sci. Rep. 8, 7253 (2018).

    Article  Google Scholar 

  12. 12.

    Pędrak, P., Drajewicz, M., Dychtoń, K. & Nowotnik, A. Microstructure and thermal characteristics of SiC–Al2O3–Ni composite for high-temperature application. J. Therm. Anal. Calorim. 125, 1353–1356 (2016).

    Article  Google Scholar 

  13. 13.

    Bougoin, M. & Lavenac, J. Large and highly stable structures made of SiC. In Proceedings of the 12th European Conference on Spacecraft Structures, Materials & Environmental Testing 691, 49–56 (ESA/ESTEC, 2012).

  14. 14.

    Dong, C., Li, K., Jiang, Y., Arola, D. & Zhang, D. Evaluation of thermal expansion coefficient of carbon fiber reinforced composites using electronic speckle interferometry. Opt. Express 26, 531–543 (2018).

    CAS  Article  Google Scholar 

  15. 15.

    Utsunomiya, S. & Shimizu, R. Monitoring of dimensional stability of CFRP mirrors for space telescopes by using embedded FBG sensors. In Proceedings of the 17th International Conference on Composite Materials (2009).

  16. 16.

    Jang, J. U., Park, H. C., Lee, H. S., Khil, M. S. & Kim, S. Y. Electrically and thermally conductive carbon fibre fabric reinforced polymer composites based on nanocarbons and an in-situ polymerizable cyclic oligoester. Sci. Rep. 8, 7659 (2018).

    Article  Google Scholar 

  17. 17.

    Chae, H. G. & Kumar, S. Making strong fibers. Science 319, 908–909 (2008).

    CAS  Article  Google Scholar 

  18. 18.

    Albertsson, A. C. & Hakkarainen, M. Designed to degrade. Science 358, 872–873 (2017).

    CAS  Article  Google Scholar 

  19. 19.

    Fujigaya, T., Saegusa, Y., Momota, S., Uda, N. & Nakashima, N. Interfacial engineering of epoxy/carbon nanotubes using reactive glue for effective reinforcement of the composite. Polymer J. 48, 183 (2016).

    CAS  Article  Google Scholar 

  20. 20.

    Utsunomiya, S., Kamiya, T. & Shimizu, R. Development of CFRP mirrors for space telescopes. In Proceedings of Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems 88370P (International Society for Optics and Photonics, 2013).

  21. 21.

    Soutis, C. & Turkmen, D. Moisture and temperature effects of the compressive failure of CFRP unidirectional laminates. J. Compos. Mater. 31, 832–849 (1997).

    CAS  Article  Google Scholar 

  22. 22.

    Shen, C. H. & Springer, G. S. Moisture absorption and desorption of composite materials. J. Compos. Mater. 10, 2–20 (1976).

    Article  Google Scholar 

  23. 23.

    Trigo, J. Dimensional stability characterisation of carbon fiber with epoxy and cyanate ester resin laminates due to moisture absorption. Proceedings of the European Conference on Spacecraft Structures, Materials & Environmental Testing 371 (ESA/ESTEC, 1996).

  24. 24.

    Sharma, H. N., Harley, S. J., Sun, Y. & Glascoe, E. A. Dynamic triple-mode sorption and outgassing in materials. Sci. Rep. 7, 2942 (2017).

    Article  Google Scholar 

  25. 25.

    Brown, A. et al. Physical origin of early failure for contaminated optics. Sci. Rep. 9, 635 (2019).

    Article  Google Scholar 

  26. 26.

    Brown, A., Ogloza, A., Taylor, L., Thomas, J. & Talghader, J. Continuous-wave laser damage and conditioning of particle contaminated optics. Appl. Opt. 54, 5216–5222 (2015).

    Article  Google Scholar 

  27. 27.

    Curcio, J. A. Adsorption and Condensation of Water on Mirror and Lens Surfaces (Naval Research Lab, 1976).

  28. 28.

    Tveekrem, J. Contamination Effects on EUV Optics (National Aeronautics and Space Administration, 1999).

  29. 29.

    Bajt, S. in EUV Lithography (ed. Bakshi, V.) Ch. 6A (SPIE Press, 2008).

  30. 30.

    Scialdone, J. Optimization of outgassing bake-out temperatures and duration of space systems. J. Environ. Sci. 29, 38–40 (1986).

    CAS  Google Scholar 

  31. 31.

    ECSS‐E‐HB‐32‐20 Part 3A Structural Materials Handbook – Part 3: Load transfer and design of joints and design of structures (ECSS, 2011).

  32. 32.

    Collings, T. & Stone, D. Hygrothermal effects in CFRP laminates: strains induced by temperature and moisture. Composites 16, 307–316 (1985).

    CAS  Article  Google Scholar 

  33. 33.

    Affi, J., OkazakiH., YamadaM. & FukumotoM. Fabrication of aluminum coating onto CFRP substrate by cold spray. Mater. Trans. 52, 1759–1763 (2011).

    CAS  Article  Google Scholar 

  34. 34.

    Silva, S. R. P., Carey, J. D., Khan, R. U. A., Anguita, J. V. & Gerstner, E. G. in Handbook of Thin Films (ed. Nalwa, H. S.) 403–506 (Academic Press, 2002).

  35. 35.

    Davis, C. A. et al. Direct observation of compositionally homogeneous a-C:H band gap modulated superlattices. Phys. Rev. Lett. 75, 4258–4261 (1995).

    CAS  Article  Google Scholar 

  36. 36.

    Kim, K., Jung, Y. C., Kim, S. Y., Yang, B. & Kim, J. Adhesion enhancement and damage protection for carbon fiber-reinforced polymer (CFRP) composites via silica particle coating. Compos. A Appl. Sci. Manuf. 109, 105–114 (2018).

    CAS  Article  Google Scholar 

  37. 37.

    Choi, H. et al. Moisture barrier properties of Al2O3 films deposited by remote plasma atomic layer deposition at low temperatures. Jpn J. Appl. Phys. 52, 035502 (2013).

    Article  Google Scholar 

  38. 38.

    Poenninger, A. & Defoort, B. Determination of the coefficient of moisture expansion (CME). In Proceedings of the 9th International Symposium on Materials in a Space Environment 567–572 (ESA, 2003).

  39. 39.

    Klapprott, D., Li, H., Wong, R. & Geisendorfer, G. Key Factors of the Peel Ply Surface Preparation Process (Henkel Corporation, 2004).

  40. 40.

    Anderson, G. et al. The effects of silicone contamination on bond performance of various bond systems. J. Adhes. 86, 1159–1177 (2010).

    CAS  Article  Google Scholar 

  41. 41.

    Bardis, J. D. Effects of Surface Preparation on the Long-term Durability of Adhesively Bonded Composite Joints DOT/FAA/AR-03/53 (US Department of Transportation Federal Aviation Administration, 2003).

  42. 42.

    Anguita, J. V. et al. Thermal stability of plasma deposited thin films of hydrogenated carbon–nitrogen alloys. J. Appl. Phys. 86, 6276–6281 (1999).

    CAS  Article  Google Scholar 

  43. 43.

    Stute, T., Wulz, G. & Scheulen, D. Recent developments of advanced structures for space optics at Astrium, Germany. In Proceedings of the 48th Annual Meeting on Optical Science and Technology 5179, 292–302 (International Society for Optics and Photonics, 2003).

  44. 44.

    Verlaan, A. L. et al. LISA telescope assembly optical stability characterization for ESA. In Proceedings of the International Conference on Space Optics 105640K (International Society for Optics and Photonics, 2017).

Download references

Acknowledgements

We thank Airbus for financial contributions. We thank EPSRC for contributing to the work via the graphene centre programme EP/L02263X/1 in helping to set up the initial infrastructure. We also thank D. Cox and V. Stolojan for the production of sample cross-sections and electron microscopy, T. Pozegic for help with gravimetric data collection and S. Hinder for the XPS analysis.

Author information

Affiliations

Authors

Contributions

The programme was designed by S.R.P.S. and J.V.A. after discussions with T.S., M.F. and M.D. regarding the requirements that evolved after the individual phases. All authors contributed to various research and testing phases of the project. The manuscript was written by J.V.A., C.T.G.S., M.D. and S.R.P.S. All authors contributed and commented on the paper.

Corresponding author

Correspondence to S. R. P. Silva.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Extended Data Fig. 1 Characterisation of the coefficient of thermal expansion (CTE) for CFRP.

Linear expansion measurements for unidirectional UD0 CFRP and BECFRP (b) and unidirectional UD90 CFRP and BECFRP. (c) Co-efficient of thermal expansion measurements for unidirectional UD0 CFRP and BECFRP (d) and unidirectional UD90 CFRP and BECFRP. CFRP is shown in red, while BECFRP is shown in blue. 20 °C is highlighted in green.

Extended Data Fig. 2 List of results from µ-VCM tests.

The results show the total mass loss (TML) and the total amount of collected volatile condensable material (CVCM) of volatile organic compounds (VOC’s) collected using a plate held at 77K with LN2. Some mass loss associated with the TML is due to water adsorbed onto the outer surface of the sample rather than contaminants trapped in the material. The uncoated CFRP reference sample was baked out at 125 °C for 14 days prior to analysis.

Extended Data Fig. 3 Dynamic Scanning Calorimetry (DSC) graphs.

DSC graphs for CFRP and (b) BECFRP highlighting the change the glass transition temperature (Tg).

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Anguita, J.V., Smith, C.T.G., Stute, T. et al. Dimensionally and environmentally ultra-stable polymer composites reinforced with carbon fibres. Nat. Mater. 19, 317–322 (2020). https://doi.org/10.1038/s41563-019-0565-3

Download citation

Further reading

Search

Quick links