In the absence of global plate tectonics, mantle convection and plume–lithosphere interaction are the main drivers of surface deformation on Venus. Among documented tectonic structures, circular volcano-tectonic features known as coronae may be the clearest surface manifestations of mantle plumes and hold clues to the global Venusian tectonic regime. Yet, the exact processes underlying coronae formation and the reasons for their diverse morphologies remain controversial. Here we use three-dimensional thermomechanical numerical simulations of impingement of a thermal mantle plume on the Venusian lithosphere to assess the origin and diversity of large Venusian coronae. The ability of the mantle plume to penetrate into the Venusian lithosphere results in four main outcomes: lithospheric dripping, short-lived subduction, embedded plume and plume underplating. During the first three scenarios, plume penetration and spreading induce crustal thickness variations that eventually lead to a final topographic isostasy-driven topographic inversion from circular trenches surrounding elevated interiors to raised rims surrounding inner depressions, as observed on many Venusian coronae. Different corona structures may represent not only different styles of plume–lithosphere interactions but also different stages in evolution. A morphological analysis of large existing coronae leads to the conclusion that at least 37 large coronae (including the largest Artemis corona) are active, providing evidence for widespread ongoing plume activity on Venus.
This is a preview of subscription content
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Rent or Buy article
Get time limited or full article access on ReadCube.
All prices are NET prices.
The numerical data that support the findings of this study can be requested from the corresponding author. A KML file based on the coronae classification in this paper is available at Zenodo under the identifier https://zenodo.org/record/3608692 (ref. 51), and can be used in Google Earth or Google Venus. The source data of the USGS coronae nomenclature is publicly available at https://go.nature.com/2Nyp54w45 and the global topography at https://topex.ucsd.edu/pub/sandwell/google/venus49.
The numerical code is available upon reasonable request. Requests can be made to T.V.G. (firstname.lastname@example.org).
Elkins-Tanton, L. T., Smrekar, S. E., Hess, P. C. & Parmentier, E. M. Volcanism and volatile recycling on a one-plate planet: applications to Venus. J. Geophys. Res. E 112, E04S06 (2007).
Huang, J., Yang, A. & Zhong, S. Constraints of the topography, gravity and volcanism on Venusian mantle dynamics and generation of plate tectonics. Earth Planet. Sci. Lett. 362, 207–214 (2013).
Crameri, F. & Kaus, B. J. P. Parameters that control lithospheric-scale thermal localization on terrestrial planets. Geophys. Res. Lett. 37, L09308 (2010).
Bercovici, D. & Ricard, Y. Plate tectonics, damage and inheritance. Nature 508, 513–516 (2014).
Solomon, S. C. et al. Venus tectonics: an overview of Magellan observations. J. Geophys. Res. 97, 13199–13255 (1992).
Kaula, W. M. Venus: a contrast in evolution to Earth. Science 247, 1191–1196 (1990).
Phillips, R. J. Convection-driven tectonics on Venus. J. Geophys. Res. 95, 1301–1316 (1990).
Wieczorek, M. A. in Treatise on Geophysics Vol. 10 (ed. Schubert, G.) 153–193 (Elsevier, 2015).
Turcotte, D. L. An episodic hypothesis for Venusian tectonics. J. Geophys. Res. 98, 17061–17068 (1993).
Strom, R. G., Schaber, G. G. & Dawson, D. D. The global resurfacing of Venus. J. Geophys. Res. 99, 10899–10926 (1994).
Romeo, L. Monte Carlo models of the interaction between impact cratering and volcanic resurfacing on Venus: the effect of the Beta-Atla-Themis anomaly. Planet. Space Sci. 87, 157–172 (2013).
Herrick, R. R. & Rumpf, M. E. Postimpact modification by volcanic or tectonic processes as the rule, not the exception, for Venusian craters. J. Geophys. Res. 116, E02004 (2011).
Bjonnes, E. E., Hansen, V. L., James, B. & Swenson, J. B. Equilibrium resurfacing of Venus: results from new Monte Carlo modeling and implications for Venus surface histories. Icarus 217, 451–461 (2012).
Simons, M., Solomon, S. C. & Hager, B. H. Localization of gravity and topography: constraints on the tectonics and mantle dynamics of Venus. Geophys. J. Int. 131, 24–44 (1997).
Anderson, F. S. & Smrekar, S. E. Global mapping of crustal and lithospheric thickness on Venus. J. Geophys. Res. 111, E08006 (2006).
Smrekar, S. E. et al. Recent hotspot volcanism on Venus from VIRTIS emissivity data. Science 328, 605–608 (2010).
O’Rourke, J. G. & Smrekar, S. Signatures of lithospheric flexure and elevated heat flow in stereo topography at coronae on Venus. J. Geophys. Res. 123, 369–389 (2018).
Phillips, R. J., Grimm, R. E. & Malin, M. C. Hot-spot evolution and the global tectonics of Venus. Science 252, 651–658 (1991).
Stofan, E. R., Smrekar, S. E., Bindschadler, D. L. & Senske, D. Large topographic rises on Venus: implications for mantle upwellings. J. Geophys. Res. 100, 23317–23327 (1995).
Stofan, R. et al. Global distribution and characteristics of coronae and related features on Venus: implications for origin and relation to mantle processes. J. Geophys. Res. 97, 13347–13378 (1992).
Filiberto, J., Trang, D., Treiman, A. H. & Gilmore, M. S. Present-day volcanism on Venus as evidenced from weathering rates of olivine. Sci. Adv. 6, eaax7445 (2020).
Stofan, E. R., Bindschadler, D. L., Head, J. W. & Parmentier, E. M. Corona structures on Venus: models of origin. J. Geophys. Res. 96, 20933–20946 (1991).
Roberts, K. & Head, J. W. Large scale volcanism associated with coronae on Venus: implications for formation and evolution. Geophys. Res. Lett. 20, 1111–1114 (1993).
Grindrod, P. M. & Hoogenboom, T. Venus: the corona conundrum. Astron. Geophys. 47, 16–21 (2006).
Gerya, T. V. Plume-induced crustal convection: 3D thermomechanical model and implications for the origin of novae and coronae on Venus. Earth Planet. Sci. Lett. 391, 183–192 (2014).
Lang, N. P. & López, I. in Volcanism and Tectonism across the Inner Solar System (eds Platz, T. et al.) 77–95 (Geological Society, 2015).
Janes, D. M. & Squyres, S. W. Viscoelastic relaxation of topographic highs on Venus to produce coronae. J. Geophys. Res. 100, 21173–21187 (1995).
Janes, D. M. et al. Geophysical models for the formation and evolution of coronae on Venus. J. Geophys. Res. 97, 16055–16067 (1992).
Smrekar, S. E. & Stofan, E. R. Corona formation and heat loss on venus by coupled upwelling and delamination. Science 277, 1289–1294 (1997).
McKenzie, D. et al. Features on Venus generated by plate boundary processes. J. Geophys. Res. 97, 13533–13544 (1992).
Sandwell, D. T. & Schubert, G. Evidence for retrograde lithospheric subduction on Venus. Science 257, 766–770 (1992).
Davaille, A., Smrekar, S. E. & Tomlinson, S. Experimental and observational evidence for plume-induced subduction on Venus. Nat. Geosci. 10, 349–355 (2017).
Piskorz, D., Elkins-Tanton, L. T. & Smrekar, S. E. Coronae formation on Venus via extension and lithospheric instability. J. Geophys. Res. 119, 2568–2582 (2015).
Hoogenboom, T. & Houseman, G. A. Rayleigh–Taylor instability as a mechanism for corona formation on Venus. Icarus 180, 292–307 (2006).
McGovern, P. J., Rumpf, M. E. & Zimbelman, J. R. The influence of lithospheric flexure on magma ascent at large volcanoes on Venus. J. Geophys. Res. 118, 2423–2437 (2013).
Dombard, A. J., Johnson, C. L., Richards, M. A. & Solomon, S. C. A magmatic loading model for coronae on Venus. J. Geophys. Res. 112, E04006 (2007).
Burov, E. & Cloetingh, S. Controls of mantle plumes and lithospheric folding on modes of intraplate continental tectonics: differences and similarities. Geophys. J. Int. 178, 1691–1722 (2009).
Baes, M., Gerya, T. & Sobolev, S. V. 3-D thermo-mechanical modeling of plume-induced subduction initiation. Earth Planet. Sci. Lett. 453, 193–203 (2016).
James, P. B., Zuber, M. T. & Phillips, R. J. Crustal thickness and support of topography on Venus. J. Geophys. Res. 118, 859–875 (2013).
Jiménez-Díaz, A. et al. Lithospheric structure of Venus from gravity and topography. Icarus 260, 215–231 (2015).
Ueda, K., Gerya, T. & Sobolev, S. V. Subduction initiation by thermal-chemical plumes: numerical studies. Phys. Earth Planet. Inter. 171, 296–312 (2008).
Stofan, E. R., Smrekar, S. E., Tapper, S. W., Guest, J. E. & Grindrod, P. M. Preliminary analysis of an expanded corona database for Venus. Geophys. Res. Lett. 28, 4267–4270 (2001).
Brown, C. D. & Grimm, R. E. Lithospheric rheology and flexure at Artemis Chasma, Venus. J. Geophys. Res. 101, 12697–12708 (1996).
Zampa, L. S., Tenzer, R., Eshagh, M. & Pitonak, M. Evidence of mantle upwelling/downwelling and localized subduction on Venus from the body-force vector analysis. Planet. Space Sci. 157, 48–62 (2018).
Gazeteer for Planetary Nomenclature (USGS Astrogeology Science Centre, accessed 2019); https://go.nature.com/2Nyp54w
Smrekar, S. E. & Stofan, E. R. Origin of corona-dominated topographic rises on venus. Icarus 139, 100–115 (1999).
Ivanov, M. A. & Head, J. W. The Lada Terra rise and Quetzalpetlatl Corona: a region of long-lived mantle upwelling and recent volcanic activity on venus. Planet. Space Sci. 58, 1880–1894 (2010).
Krassilnikov, A. S. & Head, J. W. Novae on Venus: geology, classification and evolution. J. Geophys. Res. 108, E9 (2003).
Sandwell, D. T. Venus (Scripps Institution of Oceanography, University of California San Diego, 2015); https://topex.ucsd.edu/pub/sandwell/google/venus
Kereszturi, Á., Hoogenboom, T., Bleamaster, L. F. & Hargitai, H. in Encyclopedia of Planetary Landforms https://doi.org/10.1007/978-1-4614-9213-9_439-1 (Springer, 2014).
Gülcher, A. J. P., Montési, L. G. V., Gerya, T. V. & Munch, J. Venus coronae activity classification. Zenodo https://zenodo.org/record/3608692 (2020).
Crameri, F. Scientific colour maps. Zenodo https://doi.org/10.5281/zenodo.1243862 (2018).
Gerya, T. V. & Yuen, D. A. Robust characteristics method for modelling multiphase visco-elasto-plastic thermo-mechanical problems. Phys. Earth Planet. Inter. 163, 83–105 (2007).
Gerya, T. V., Stern, R. J., Baes, M., Sobolev, S. V. & Whattam, S. A. Plate tectonics on the Earth triggered by plume-induced subduction initiation. Nature 527, 221–225 (2015).
Gerya, T. V. Introduction to Numerical Geodynamic Modelling (Cambridge Univ. Press, 2010)
Schmeling, H. et al. A benchmark comparison of spontaneous subduction models—towards a free surface. Phys. Earth Planet. Inter. 171, 198–223 (2008).
Ranalli, G. Rheology of the Earth 2nd edn (Springer, 1995).
Turcotte, D. L. & Schubert, G. Geodynamics 2nd edn (Cambridge Univ. Press, 2002).
Gerya, T. V. Three-dimensional thermomechanical modeling of oceanic spreading initiation and evolution. Phys. Earth Planet. Inter. 214, 35–52 (2013).
Bahadori, A. & Holt, W. E. Geodynamic evolution of southwestern North America since the Late Eocene. Nat. Commun. 10, 5213 (2019).
Koptev, A., Calais, E., Burov, E., Leroy, S. & Gerya, T. Dual continental rift systems generated by plume–lithosphere interaction. Nat. Geosci. 8, 388–392 (2015).
Katz, R. F., Spiegelman, M. & Langmuir, C. H. A new parameterization of hydrous mantle melting. Geochem. Geophys. Geosyst. 4, 1073 (2003).
Connolly, J. A. D., Schmidt, M. W., Solferino, G. & Bagdassarov, N. Permeability of asthenospheric mantle and melt extraction rates at mid-ocean ridges. Nature 462, 209–212 (2009).
Ito, K. & Kennedy, G. in The Structure and Physical Properties of the Earth’s Crust (ed. Heacock, J. G.) 301–314 (American Geophysical Union, 1971).
d’Acremont, E., Leroy, S. & Burov, E. B. Numerical modelling of a mantle plume: the plume head–lithosphere interaction in the formation of an oceanic large igneous province. Earth Planet. Sci. Lett. 206, 379–396 (2003).
Weinberg, R. F. & Podladchikov, Y. Diapiric ascent of magmas through power law crust and mantle. J. Geophys. Res. 99, 9543–9559 (1994).
Burov, E. & Cloetingh, S. Plume-like upper mantle instabilities drive subduction initiation. Geophys. Res. Lett. 37, L03309 (2010).
Korenaga, J. Initiation and evolution of plate tectonics on Earth: theories and observations. Annu. Rev. Earth Planet. Sci. 41, 117–151 (2013).
Harris, L. B. & Bedard, J. in Evolution of Archean Crust and Early Life (eds Dilek, Y. & Furnes, H.) Ch. 9 (Springer, 2013).
Jellinek, A. M. The influence of interior mantle temperature on the structure of plumes: heads for Venus, tails for the Earth. Geophys. Res. Lett. 29, 1532 (2002).
Ivanov, M. A. & Head, J. W. Global geological map of Venus. Planet. Space Sci. 59, 1559–1600 (2011).
Pettengill, G. H., Ford, P. G. & Wilt, R. J. Venus surface radiothermal emission as observed by Magellan. J. Geophys. Res. 97, 13091 (1992).
Wessel, P. & Smith, W. Generic Mapping Tools: improved version released. EOS Trans. AGU 94, 409–410 (2013).
D’Incecco, P., Mueller, N., Helbert, J. & D’Amore, M. Idunn Mons on Venus: location and extent of recently active lava flows. Planet. Space Sci. 136, 25–33 (2016).
This study was co-funded by the grant NASA NNX14AG51G (L.G.J.M.), SNF grant 200021_182069 (T.V.G. and J.M.) and EU project Subitop (J.M.). All simulations were performed on the ETH-Zürich Euler cluster. The open-source software ParaView (http://www.paraview.org) was used for 3D visualizations of the experiments.
The authors declare no competing interests.
Peer review information Primary Handling Editors: Tamara Goldin; Stefan Lachowycz.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended Data Fig. 1 Global distribution of coronae (diameter > 300 km) identified as inactive (white circles), showing ongoing activity (red circles) or unclassified (grey circles).
The global topography49 is relative to 6051.877 km and is plotted on a Mollweide projection centred at 60°E longitude. Nomenclature of key areas and chasmata are shown in light text. Pink stars relate to the locations of identified raised novae structures48 proposed to be sites of ongoing plume activity25. The orange star correspond to Idunn Mons, an identified location of recently active lava flows16,74. All analysed coronae are recorded in Supplementary Table 1. A KML file containing the location of each of the coronae is available on Gülcher et al. (2020)51. The dashed lines contour our proposed areas of focused plume activity (red) or inactivity (white). The perceptually uniform scientific colour map ‘lapaz’52 was used for this figure to prevent visual distortion of the data.
Details can be found in Methods description. A 2D cross-section through the centre of the model shows initial composition configuration (upper cross-section) and initial temperature distribution (lower cross-section). The vertical model boundaries in the x and z direction are symmetrical. The colour code for different materials is shown at the bottom of the figure.
Extended Data Fig. 3 Density increase of crustal material due to the basalt to eclogite phase change.
a, P-T region of the density increase due to the eclogitic phase change64, as implemented in our numerical code (see Methods) b–d, Close-up on the short-term evolution of the reference model M0 (Fig. 1, main text). The density is shown in the cross-sections, and as the mantle plume pierces through the lithosphere, the lithosphere at the plume margin is pushed downwards and its density subsequently increases as it undergoes the basalt to eclogite phase change.
Extended Data Fig. 4 Evolution of a corona model in the transitional regime featuring an embedded plume (Model M2).
Model M2 has a colder initial mantle plume than the reference model, and thus a lower plume buoyancy (see Extended Data Table 2 for details of the models). a, the plume rises up to the surface, resulting in crustal uplift (at 1.88 Myr); b, the plume partially penetrates through the lithosphere but becomes embedded (at 3.24 Myr); c, the plume cools down and molten material recrystallizes, and the corona interior sinks to leave behind a raised rim (at 38.9 Myr).
Extended Data Fig. 5 Surface-strain rate for three evolutionary stages of models M9 (left), M2 (middle) and M17 (right).
See Extended Data Table 2 for details of the models. a, model M9 (reference model for ‘ephemeral subduction’ regime): the penetrating plume fully penetrates the lithosphere and crust resulting in a high strain rate, viscous corona interior in which deformation structures cannot be distinguished. Concentric deformation features at the corona margin can be recognized throughout the model evolution. The times of the snapshots correspond to those shown in Fig. 5a–c. b, model M2 (reference model for ‘embedded plume’ regime): more deformation structures can be recognized due to less melt at the surface. In addition to concentric features, stellate deformation features trace the surface in the first two stages. The timing of the snapshots corresponds to those shown in Extended Data Fig. 4. c, model M17 (also categorized as ‘embedded plume’ regime): many concentric and few radial deformation features can be observed at the surface. Important to note is that our model resolution and simplifications do not allow for a more detailed interpretation of tectonic structures at the surface and comparison thereof with observables (see Methods).
Extended Data Fig. 6 Sketches of the four geodynamic regimes identified in numerical models, during the active stage.
a, Lithospheric dripping, in which mantle plume penetration into the lithosphere is followed by delamination of lithospheric drips at the plume margins. b, Ephemeral subduction, in which a short-lived radial subduction zones follows plume impingement. The downgoing slabs eventually break off. c, Embedded plume (transitional regime), in which the plume is able to penetrate partially through the lithosphere but is terminally embedded beneath the crust. d, Plume underplating, in which the mantle plume is not able to pierce through the lithosphere but instead spreads outward beneath it.
Extended Data Fig. 7 Comparison between topographic signatures displayed by the Artemis corona (left) and the simulated coronae in model M3 at time t = 1.4 Myr (right).
colour code in both images has the same scale. The Artemis topographic profile is plotted with GMT73 based on the global topography data49. Both models show a small but clear ridge within the corona-encircling trench, characteristics in numerical models for the period shortly following lithospheric break-off/delamination and trench uplift. It is notable that the shoulders on the southeast of the figures are markedly different. This could possibly be ascribed due to the fact that the modelled case features lithospheric dripping and not subduction (as is proposed for Artemis30,31,32,43,45). Models with greater scaled crustal thicknesses (Hcrust/Hlith) have shown to produce higher-amplitude trenches and outer rises (see text).
Extended Data Fig. 8 Averaged corona surface heat flow over time (first 10 Myr of model evolution) for all numerical models in this study.
Color coding is accordingly to the regime the numerical models are assigned to (see main text and Fig. 3). More detail on the calculation of the averaged corona surface heat flow can be found in Methods. Peak heat flow reaches ~500–600 mW/m2 (plume penetrating regimes); ~200 mW/m2 (embedded plume regime), or ~50 mW/m2 (for underplated plume), but decreases significantly following peak activity.
Supplementary Table 1.
Locations of classified active and inactive coronae on the Venusian surface on a 3D rotating globe. The red circles represent active coronae and the white circles inactive coronae. The global topography45 is relative to 6,051.877 km. of ongoing plume activity25. All analysed coronae are recorded in Supplementary Table 1. A KML file containing the location of each of the coronae is available from ref. 51.
About this article
Cite this article
Gülcher, A.J.P., Gerya, T.V., Montési, L.G.J. et al. Corona structures driven by plume–lithosphere interactions and evidence for ongoing plume activity on Venus. Nat. Geosci. 13, 547–554 (2020). https://doi.org/10.1038/s41561-020-0606-1
Trans-lithospheric diapirism explains the presence of ultra-high pressure rocks in the European Variscides
Communications Earth & Environment (2021)