Correction to: npj Materials Degradation https://doi.org/10.1038/s41529-022-00280-y, published online 19 August 2022
In this article the affiliations for Mohammad Jahanbakht were incorrectly given as ‘3Department of Industrial, Manufacturing, and Systems Engineering, The University of Texas at Arlington, Arlington, TX 76019, United States. 4Graduate School of Management and Economics, Sharif University of Technology, Tehran,1458889694, Iran.’ but should have been ‘3Graduate School of Management and Economics, Sharif University of Technology, Tehran,1458889694, Iran. 4Department of Industrial, Manufacturing, and Systems Engineering, The University of Texas at Arlington, Arlington, TX 76019, United States,’. The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Shahriari, A., Samei, J., Sanjari, M. et al. Author Correction: Plastic injection molding dies using hybrid additively manufactured 420/CX stainless steels: electrochemical considerations. npj Mater Degrad 6, 78 (2022). https://doi.org/10.1038/s41529-022-00290-w
Published:
DOI: https://doi.org/10.1038/s41529-022-00290-w