Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Original Article
  • Published:

Effect of polymerization conditions on physicochemical properties of gold-like lustrous films of organic solvent soluble 3-methoxythiophene oligomers

Polymer Journal volume 53, pages 1019–1029 (2021)Cite this article

Subjects

Abstract

Solution-cast films of ClO4−-doped oligo(3-methoxythiophene) exhibit a luster similar to that of metallic gold; however, the effects of synthetic conditions on the physicochemical properties of the above oligomer and its films remain underexplored. To bridge this gap, this study examines how these properties are affected by (i) the time required to add the oxidant solution to the monomer solution (ta) and (ii) the polymerization time (tp) for oligomer synthesis, revealing that oligomer molecular weight, film conductivity, and the amount of edge-on lamellar crystallites increase with decreasing ta and/or increasing tp. Given that the crystallinity of edge-on lamellar structures, together with film surface roughness, strongly influences film specular reflectance, the obtained results are expected to facilitate the fabrication of conductive oligo(3-methoxythiophene) films with tunable color and metal-like luster for diverse applications.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1
Fig. 2
Fig. 3
Scheme 1
Scheme 2
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Granström M. Novel polymer light‐emitting diode designs using poly(thiophenes). Polym Adv Technol. 1997;8:424–30.

    Article  Google Scholar 

  2. Bento DC, Maia ECR, Cervantes TNM, Fernandes RV, Mauro ED, Laureto E, et al. Optical and electrical characteristics of poly(3-alkylthiophene) and polydiphenylamine copolymers: applications in light-emitting devices. Synth Met. 2012;162:2433–42.

    Article  CAS  Google Scholar 

  3. Bao Z, Dobabalapur A, Lovinger AJ. Soluble and processable regioregular poly(3-hexylthiophene) for thin film field-effect transistor applications with high mobility. Appl Phys Lett. 1996;69:4108–10.

    Article  CAS  Google Scholar 

  4. Huynh WU, Dittmer JJ, Alivisatos AP. Hybrid nanorod-polymer solar cells. Science. 2002;295:2425–7.

    Article  CAS  Google Scholar 

  5. Kim Y, Cook S, Stelios Choulis SA, Nelson J, Durrant JR, Donal. et al. Organic photovoltaic devices based on blends of regioregular poly(3-hexylthiophene) and poly(9,9-dioctylfluorene-co-benzothiadiazole. Chem Mater. 2004;16:4812–8.

    Article  CAS  Google Scholar 

  6. Fukuda H, Yamagishi Y, Isea M, Takano N. Gas sensing properties of poly-3-hexylthiophene thin film transistors. Sens Actuators B. 2005;108:414–7.

    Article  CAS  Google Scholar 

  7. Yoshino K, Hayashi S, Sugimoto R. Preparation and properties of conducting heterocyclic polymer films by chemical method. Jpn J Appl Phys. 1984;23:L899–L900.

    Article  Google Scholar 

  8. Leclerc M, Diaz FM, Wegner G. Structural analysis of poly(3-alkylthiophene)s. 1989;190:3105–16.

  9. Chen TA, Wu X, Rieke RD. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by Rieke zinc: Their characterization and solid-state properties. J Am Chem Soc. 1995;117:233–44.

    Article  CAS  Google Scholar 

  10. Facchinatto WM, Torres BB, Balogh DT. One-pot synthesis of poly(3-hexylthiophene) with variable degrees of molar mass and regioregularity. J Polym Res. 2016;23:187.

    Article  Google Scholar 

  11. Torres BBM, Balogh DT. Regioregular improvement on the oxidative polymerization of poly-3-octylthiophenes by slow addition of oxidant at low temperature. J Appl Polym Sci. 2012;124:3222–8.

    Article  CAS  Google Scholar 

  12. Andersson MR, Selse D, Berggren M, Järvinen H, Hjertberg T, Inganäs T, et al. Regioselective polymerization of 3-(4-octylphenyl)thiophene with FeCl3. Macromolecules. 1994;27:6503–6.

    Article  CAS  Google Scholar 

  13. Amou S, Haba O, Shirato K, Hayakawa T, Ueda M, Takeuchi K, et al. Head-to-tail regioregularity of poly(3-hexylthiophene) in oxidative coupling polymerization with FeCl3. J Polym Sci Pol Chem. 1999;37:1943–8.

    Article  CAS  Google Scholar 

  14. Shimomura M, Kaga M, Nakayama N, Miyauchi S. Thermal and electrical properties of poly(3-alkylthiophene)s prepared by the oxidative polymerization. Synth Met. 1995;69:313–4.

    Article  CAS  Google Scholar 

  15. Tagawa R, Masu H, Itoh T, Hoshino K. Solution-cast self-assembled films of perchloratedoped oligo(3-methoxythiophene) showing a gold-like luster. RSC Adv. 2014;4:24053–8.

    Article  CAS  Google Scholar 

  16. Takashina Y, Mitogawa T, Saito K, Hoshino K. Chemical events in oligo(3-methoxythiophene) coating solutions and their effect on the goldlike coating film properties. Langmuir. 2018;34:3049–57.

    Article  CAS  Google Scholar 

  17. Takashina Y, Hoshino K. Effect of π–π interaction-induced secondary doping on the gold-like luster of oligo(3-methoxythiophene) cast films. Polym J. 2019;51:591–9.

    Article  CAS  Google Scholar 

  18. Hill MG, Penneau JF, Zinger B, Mann KR, Miller LL. Oligothiophene cation redicals. π-dimers as alternatives to bipolarons in oxidized polythiophenes. Chem Mater. 1992;4:1106–13.

    Article  CAS  Google Scholar 

  19. Hill MG, Mann KR, Miller LL, Penneau JF. Oligothiophene cation radical dimers. An alternative to bipolarons in oxidized polythiophene. J Am Chem Soc. 1992;114:2728–30.

    Article  CAS  Google Scholar 

  20. Yu Y, Gunic E, Zinger B, Miller LL. Spectra and reactivity of methoxyoligothiophene cation radicals. J Am Chem Soc. 1996;118:1013–8.

    Article  CAS  Google Scholar 

  21. D’agnillo L, Soaress JBP, Penlidis A. Round-robin experiment in high-temperature gel permeation chromatography. J Polym Sci B. 2002;40:905–21.

    Article  Google Scholar 

  22. Zhang ZB, Fujiki M. Synthesis and molecular weight dependent optical properties of mono-alkoxy substituted polythiophenes. Polym J. 2001;33:597–601.

    Article  CAS  Google Scholar 

  23. Hu X, Xu L. Structure and properties of 3-alkoxy substituted polythiophene synthesized at low temperature. Polymer. 2000;41:9147–54.

    Article  CAS  Google Scholar 

  24. Mao H, Holdcroft S. Grignard synthesis of π-conjugated poly(3-alkythiophenes): Controlling molecular weights and the nature of terminal units. Macromolecules. 1992;25:554–8.

    Article  CAS  Google Scholar 

  25. Mao H, Xu B, Holdcroft S. Synthesis and structure-property relationships of regioirregular poly(3-hexylthiophenes). Macromolecules. 1993;26:1163–9.

    Article  CAS  Google Scholar 

  26. Barbarella G, Bongini A, Zambianchi M. Regiochemistry and conformation of poly(3-hexylthiophene) via the synthesis and the spectroscopic characterization of the model configurational triads. Macromolecules. 1994;27:3039–45.

    Article  CAS  Google Scholar 

  27. Barbarella G, Zambianchi M, Rosanna Toro RD, Colonna M Jr, Iarossi D, Francesca Goldoni F, et al. Regioselective oligomerization of 3-(alkylsulfanyl)thiophenes with ferric chloride. J Org Chem. 1996;61:8285–92.

    Article  CAS  Google Scholar 

  28. Tachiki M, Tagawa R, Hoshino K. Oligo(3-methoxythiophene)s as water-soluble dyes for highly lustrous gold- and bronze-like metal-effect coatings and printings. ACS Omega. 2020;5:24379–88.

    Article  CAS  Google Scholar 

  29. Bennett HE, Porteus JO. Relation between surface roughness and specular reflectance at normal incidence. J Opt Soc Am. 1961;51:123–9.

    Article  CAS  Google Scholar 

  30. Dobierzewska-Mozrzymas E, Rysiakiewicz-Pasek E, Biegan´ski P, Polan´ska J, Pieciul E. Application of the optical method for determining of the RMS roughness of porous glass surfaces. J Non-Cryst Solids. 2008;354:3241–5.

    Article  CAS  Google Scholar 

  31. Ohara M, Takigawa Y, Higashi K. Effect of surface roughness on specular gloss in AZ31 magnesium alloy. J Jpn Inst Light Met. 2010;60:259–63.

    Article  CAS  Google Scholar 

  32. Sirringhaus H, Tessler N, Richard H, Friend RH. Integrated optoelectronic devices based on conjugated polymers. Science. 1998;280:1741–4.

    Article  CAS  Google Scholar 

  33. Sirringhaus H, Brown PJ, Friend RH, Nielen MM, Bechgarrd K, Langeveld-Voss BMW, et al. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers. Nature. 1999;401:685–8.

    Article  CAS  Google Scholar 

  34. Liu C, Oshima K, Masato Shimomura M, Miyauchi S. Anisotropic conductivity–temperature characteristic of solution-cast poly(3-hexylthiophene) films. Synth Met. 2006;156:1362–7.

    Article  CAS  Google Scholar 

  35. Tokuda T, Hoshino K. Electropolymerized films of 3-methoxythiophene with a potential sweep-induced gold-like luster. Polym J. 2016;48:1141–9.

    Article  CAS  Google Scholar 

  36. Kline RJ, McGehee MD, Kadnikova EN, Liu J, Fréchet JMJ, Toney MF. Dependence of regioregular poly(3-hexylthiophene) film morphology and field-effect mobility on molecular weight. Macromolecules. 2005;38:3312–9.

    Article  CAS  Google Scholar 

  37. Kline RJ, McGehee MD, Kdnikova EN, Liu J, Frechet JMJ. Controlling the field-effect mobility of regioregular polythiophene by changing the molecular weight. Adv Mater. 2003;15:1519–22.

    Article  CAS  Google Scholar 

  38. Zen A, Pflaum J, Hirschmann S, Zhuang W, Jaiser F, Asawa-pirom U, et al. Effect of molecular weight and annealing of poly(3-hexylthiophene)s on the performance of organic field-effect transistors. Adv Funct Mater. 2004;14:757–64.

    Article  CAS  Google Scholar 

  39. Zen A, Saphiannikova M, Neher D, Grenzer J, Grigorian S, Pietsch U, et al. Effect of molecular weight on the structure and crystallinity of poly(3-hexylthiophene). Macromolecules. 2006;39:2162–71.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was financially supported by JSPS KAKENHI Grant Number 20K05614. The authors thank the Center for Analytical Instrumentation of Chiba University for measurements of the specular reflection and 1H NMR spectra.

Author information

Authors and Affiliations

  1. Department of Materials Science, Graduate School of Engineering, Chiba University, Chiba, Japan

    Minako Kubo, Hirotaka Doi, Ryota Saito, Kenta Horikoshi, Satoru Tsukada & Katsuyoshi Hoshino

Authors
  1. Minako Kubo
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Hirotaka Doi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ryota Saito
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Kenta Horikoshi
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Satoru Tsukada
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Katsuyoshi Hoshino
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Katsuyoshi Hoshino.

Ethics declarations

Conflict of interest

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kubo, M., Doi, H., Saito, R. et al. Effect of polymerization conditions on physicochemical properties of gold-like lustrous films of organic solvent soluble 3-methoxythiophene oligomers. Polym J 53, 1019–1029 (2021). https://doi.org/10.1038/s41428-021-00496-w

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41428-021-00496-w

Search

Advanced search

Quick links