Abstract
Polypropylene (PP)/graphite (G) hybrid nanocomposites have been prepared by melt mixing using maleated PP (PP-g-MA) and graphite oxide (GO) as compatibilizing agents. Melt mixing was achieved using a Gelimat, a high-speed thermo-kinetic mixer. The PP-g-MA and GO used as compatibilizers helped the dispersion of the graphite on a nano-scale and improved flexural properties but more significantly the impact strength of the material. TEM micrographs showed a partial exfoliation of the graphite in the PP/PP-g-MA/GO/G hybrid nanocomposites. SEM micrographs of etched nanocomposite samples showed a fine grain micron-sized structure, while pure PP was characterized by larger 3-dimensional spherulites. Non-isothermal crystallization kinetics of PP and PP/PP-g-MA/GO/G nanocomposites were investigated by differential scanning calorimetry (DSC). The crystallinity and crystallization temperature of the nanocomposites were higher than for neat PP. Using the Kissinger model, the activation energy of crystallization of the nanocomposites was determined to be lower than PP. Models by Ozawa and Liu et al. were used to analyze and describe the non-isothermal crystallization kinetics. Overall, results indicate that the type of nucleation, growth and geometry of PP crystals markedly change in the presence of nano-sized graphite particles.
Similar content being viewed by others
Article PDF
References
“Polymer-Clay Nanocomposites,” T. J. Pinnavaia and G. W. Beall, Ed., John Wiley & Sons, Ltd, New York, 2001, chap. 2.
M. Kawasumi, N. Hasegawa, M. Kato, A. Usuki, and A. Okada, Macromolecules, 30, 6333 (1997).
J. Heinemann, P. Reichert, R. Thomann, and R. Mulhaupt, Macromol. Rapid Commun., 20, 423 (1999).
A. Oya and Y. Kurokawa, J. Mater. Sci., 35, 1045 (2000).
E. P. Giannelis, Adv. Mater., 8, 29 (1996).
T. G. Gopakumar, J. A. Lee, M. Kontopoulou, and J. S. Parent, Polymer, 43, 5483 (2002).
Q. Guoqiang, J. W. Cho, and T. Lan, “Proc. of Polyolefins,” Houston, TX 2001.
S. Hambir, N. Bulakh, P. Kodgire, R. Kalaonkar, and J. P. Jog, J. Appl. Polym. Sci., 39, 446 (2001).
F. Perrin-Sarazin, M.-T. Thon-That, M. N. Bureau, and J. Denault, Polymer, 46, 11624 (2005).
J.-J. Wu, T.-M. Wu, W.-Y. Chen, S.-J. Tsai, W.-F. Kuo, and G.-Y. Chang, J. Polym. Sci., Part B: Polym. Phys., 43, 3242 (2005).
K. H. Wang, M. H. Choi, C. M. Koo, Y. S. Choi, and I. J. Chung, Polymer, 42, 9819 (2001).
F. W. Uhl and C. A. Wilkie, Polym. Degrad. Stab., 76, 111 (2002).
J. W. Shen, X. M. Chen, and W. Y. Huang, J. Appl. Polym. Sci., 88, 1864 (2003).
Y. X. Pan, Z. Z. Yu, Y. C. Ou, and G. H. Hu, J. Polym. Sci., Part B: Polym. Phys., 38, 1626 (2000).
N. A. Kotov, I. Dekany, and J. H. Fendler, Adv. Mater., 8, 637 (1996).
W. Zheng, S. C. Wong, and H. J. Sue, Polymer, 43, 6767 (2002).
W. Zheng, X. Lu, and S. C. Wong, J. Appl. Polym. Sci., 91, 2781 (2004).
T. G. Gopakumar and D. J. Y. S. Pagé, Polym. Eng. Sci., 44, 1162 (2004).
S. Frenken, D. Lyons, and W. E. Baker, “49th SPE ANTEC,” 1991, pp 40–45.
D. Lyons and W. E. Baker, Int. Polym. Process., 2, 136 (1990).
T. G. Gopakumar and D. J. Y. S. Pagé, J. Appl. Polym. Sci., 96, 1557 (2005).
L. Mandelkern, “Crystallization of polymers,” McGraw-Hill, New York, 1964, pp 67–71.
B. Wunderlich, “Macromolecular physics,” Academic Press, New York, 1973.
T. G. Gopakumar, R. S. Ghadage, S. Ponrathnam, and C. R. Rajan, Polymer, 38, 2209 (1997).
W. Xui, M. Ge, and P. J. He, J. Polym. Sci., Part B: Polym. Phys., 40, 408 (2002).
P. Maiti, P. H. Nam, M. Okamoto, N. Hasegawa, and A. Usuki, Macromolecules, 35, 2042 (2002).
J. Qian, P. He, and K. Nie, J. Appl. Polym. Sci., 91, 1013 (2004).
J.-D. He, M. K. Cheung, M.-S. Yang, and Z. Qi, J. Appl. Polym. Sci., 89, 3404 (2003).
W. Xu, G. Liang, H. Zhai, S. Tang, G. Hang, and W.-P. Pan, Eur. Polym. J., 39, 1467 (2003).
P. Svoboda, C. Zeng, H. Wang, L. Lee, and D. L. Tomasko, J. Appl. Polym. Sci., 85, 1562 (2002).
L. Valentini, J. Biagiotti, J. M. Kenny, and S. Santucci, J. Appl. Polym. Sci., 87, 708 (2003).
W. Zhu, G. Zhang, J. Yu, and G. Dai, J. Appl. Polym. Sci., 91, 431 (2004).
L. Valentini, J. Biagiotti, J. M. Kenny, and M. A. Lopez, J. Appl. Polym. Sci., 89, 2657 (2003).
A. Somwangthanaroj, E. C. Lee, and M. J. Solomon, Macromolecules, 36, 2333 (2003).
M. Mucha, J. Marszalek, and A. Fifrych, Polymer, 41, 4137 (2000).
B. P. Grady, F. Pompeo, R. L. Shambaugh, and D. E. Reasasco, J. Phys. Chem. B, 106, 5852 (2002).
A. R. Bhattacharyya, T. U. Sreekumar, T. Liu, S. Kumar, L. M. Ericson, R. H. Hauge, and R. E. Smalley, Polymer, 44, 2373 (2003).
L. Valentini, J. Biagiotti, J. M. Kenny, and S. Santucci, J. Appl. Polym. Sci., 87, 707 (2003).
W. Leelapornpisit, M.-T. Ton-That, F. Perrin-Sarazin, K. C. Cole, J. Denault, and B. Simard, J. Polym. Sci., Part B: Polym. Phys., 43, 2445 (2005).
J. Park, K. Eom, O. Kwon, and S. Woo, Microsc. Microanal., 7, 276 (2001).
M. Eder and A. Wlochowicz, Polymer, 24, 1593 (1983).
H. E. Kissinger, Anal. Chem., 29, 1702 (1957).
M. J. Avrami, Chem. Phys., 7, 1130 (1939).
T. Ozawa, Polymer, 12, 150 (1971).
T. Liu, Z. Mo, S. Wang, and H. Zhang, Polym. Eng. Sci., 37, 568 (1997).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pagé, D., Gopakumar, T. Properties and Crystallization of Maleated Polypropylene/Graphite Flake Nanocomposites. Polym J 38, 920–929 (2006). https://doi.org/10.1295/polymj.PJ2006020
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1295/polymj.PJ2006020
Keywords
This article is cited by
-
Non-isothermal crystallization kinetics of poly(propylene)-based graphene nanocomposites for injection moulding
Journal of Thermal Analysis and Calorimetry (2022)
-
Thermal-resistant, shear-stable and salt-tolerant polyacrylamide/surface-modified graphene oxide composite
Journal of Materials Science (2019)
-
Exfoliated graphite nanoplatelet-filled impact modified polypropylene nanocomposites: influence of particle diameter, filler loading, and coupling agent on the mechanical properties
Applied Nanoscience (2014)
-
Direct assembly of in situ templated CdSe quantum dots via crystalline lamellae structure of polyamide 66
Journal of Nanoparticle Research (2012)
-
Effect of initial melting temperature on crystallization of polypropylene/organoclay nanocomposites
Macromolecular Research (2012)