Abstract
The effects of three triblock copolymers of poly[styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS) of different molecular weight (MW) on the morphology, tensile strength and thermal behavior of isotactic polypropylene/syndiotactic polystyrene (iPP/sPS, 80/20) blend are investigated. Morphology observation shows that both the medium MW and the lower MW SEBS are more effective than the higher MW SEBS in compatibilizing the blends. Tensile tests revels both the medium and low MW compatibilizer lead to a significant improvement in tensile strength, while the higher MW compatibilizer is efficient in increasing the elongation at break of the blends. The localization of compatibilizers in the blends is observed by mean of SEM and the correlation between the distribution of the compatibilizers and mechanical properties of the blends is evaluated. The mechanical properties of the iPP/sPS blends depend on not only the interfacial activity of the compatibilizers but also the distribution of the compatibilizer in the blend. Addition of the compatibilizers to the blend causes a remarkable decrease in the magnitude of the crystallization peak of sPS at its usual Tc. Vicat softening points demonstrate that the heat resistance of iPP/sPS blend is much higher than that of the pure iPP.
Similar content being viewed by others
Article PDF
References
M. K. Akkapeddi and B. VanBuskirk, Adv. Polym. Technol., 11, 263 (1992).
Y. X. Pang, D. M. Jia, H. J. Hu, D. J. Hourston, and M. Song, Polymer, 41, 357 (2000).
C. Wippler, Polym. Eng. Sci., 33, 347 (1993).
P. T. Hielaoya, R. M. Holsti-Miettinen, J. V. Seppala, and O. T. Ikkala, J. Appl. Polym. Sci., 54, 1613 (1994).
R. Po and N. Cardi, Prog. Polym. Sci., 21, 47 (1996).
N. Ishihara, T. Seimiya, M. Kuramoto, and M. Uoi, Macromolecules, 19, 2464 (1986).
T. Ijitsu, T. Sumitomo, M. Sawada, and K. Funaki, Eur. Patent 318 793 (July 7, 1988).
T. Sumitomo and K. Funaki, Eur. Patent 324 398 (July 19, 1989).
A. Okada, Eur. Patent 587 098 (Mar 16, 1994).
A. Okada and N. Sato, Eur. Pat. 1993, 587100 (Mar 16, 1994).
C. C. Chou, US. Patent 1993, 5241015 (Aug. 31, 1993).
B. Chen, X. L. Li, S. Xu, T. Tang, B. L. Zhou, and B. T. Huang, Polymer, 43, 953 (2002).
S. Xu, B. Chen, T. Tang, and B. T. Huang, Polymer, 40, 3399 (1999).
L. Abis, L. Abbondanza, R. Braglia, L. Castellani, G. Giannotta, and R. Po, Macromol. Chem. Phys., 201, 1732 (2000).
B. K. Hong and W. H. Jo, Polymer, 41, 2069 (2000).
B. Chen, T. Tang, S. Xu, X. Zhang, and B. T. Huang, Polym. J., 35, 141 (2003).
D. R. Paul and S. Newman, “Polymer Blends Vol. 2”, Academic Press, New York, N.Y., 1978, Chap. 12.
O. O. Santana and A. Muller, Polym. Bull., 32, 471 (1994).
G. Radonuic, V. Musil, and I. Smit, J. Appl. Polym. Sci., 69, 2625 (1998).
D. Fortelny and D. Michalkova, Polym. Networks Blends, 7, 125 (1997).
T. Appleby, F. Cser, G. Moad, E. Rizzardo, and C. Stavropoulos, Polym. Bull., 32, 479 (1994).
S. Xu, B. Chen, Y. Liu, H. Chen, and B. T. Huang, Chin. Chem. Lett., 9, 407 (1998).
H. Ermer, R. Thomann, J. Kressler, R. Brenn, and J. Wunsch, Macromol. Chem. Phys., 198, 3639 (1997).
B. K. Hong, W. H. Jo, and J. Kim, Polymer, 39, 3753 (1998).
M. Bonnet, M. Buhk, G. Trogner, K. D. Rogausch, and J. Petermann, Acta Polym., 49, 174 (1998).
R. Fayt, R. Jerome, and Ph. Teyssie, J. Polym. Sci., Polym. Lett. Ed., 24, 25 (1986).
S. Datta and D. J. Lohse, Macromolecules, 26, 2064 (1993).
H. Y. Zhao and B. T. Huang, J. Polym. Sci., Polym. Phys. Ed., 36, 85 (1998).
F. C. Stehling, T. Huff, C. S. Speed, and J. Wissler, J. Appl. Polym. Sci., 26, 2693 (1981).
A. Ghijsels, N. Groesbeek, and C. W. Yip, Polymer, 23, 1913 (1982).
C. Robitaille and J. Prud’homme, Macromolecules, 16, 665 (1983).
H. Frensch and B. J. Jungnickel, Colloid Polym. Sci., 267, 16 (1989).
M. Taha and V. Frerejean, J. Appl. Polym. Sci., 61, 969 (1996).
K. Char, H. R. Brown, and V. R. Deline, Macromolecules, 26, 4164 (1993).
M. N. Bureau, H. E. Kadi, J. Denault, and J. I. Dickson, Polym. Eng. Sci., 37, 377 (1997).
M. C. Schwarz, J. W. Barlow, and D. R. Paul, J. Appl. Polym. Sci., 37, 403 (1989).
S. A. Xu and C. M. Chan, Polym. J., 30, 552 (1998).
T. Li, V. A. Topolkareav, A. Hiltner, E. Bear, and R. P. Quirk, J. Polym. Sci., Polym. Phys. Ed., 33, 667 (1995).
D. Heikens, N. Hoen, W. Barentsen, P. Peit, and H. Ladan, J. Polym. Sci., Polym. Symp., 62, 309 (1978).
H. P. Blom, J. W. The, T. Bremner, and A. Rudin, Polymer, 39, 4011 (1998).
O. T. Ikkala, R. M. Holsti-Miettinen, and J. Seppala, J. Appl. Polym. Sci., 49, 1165 (1993).
H. S. Moon, B. K. Ryoo, and J. K. Park, J. Polym. Sci., Polym. Phys. Ed., 32, 1427 (1994).
T. Tang, Z. Lei, X. Zhang, H. Chen, and B. Huang, Polymer, 36, 5061 (1995).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chen, B., Tang, T., Li, X. et al. Morphology, Tensile Strength and Thermal Behavior of Isotactic Polypropylene/Syndiotactic Polystyrene Blends Compatibilized by SEBS Copolymers. Polym J 36, 284–293 (2004). https://doi.org/10.1295/polymj.36.284
Published:
Issue Date:
DOI: https://doi.org/10.1295/polymj.36.284