Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

The magnetic response of graphene split-ring metamaterials


Graphene has emerged as a promising platform for THz plasmonics, allowing high confinement, long lifetimes and fast electrical tunability. Here, we predict a strong magnetic dipole response by graphene split nanorings at THz frequencies, allowing the attainment of metamaterials with a high degree of field confinement (approximately one hundredth of the excitation wavelength) that is not reachable with conventional noble metals. The magnetic response of highly doped graphene split-rings in the far-infrared is much stronger than that displayed by gold structures of similar thicknesses. We further explored stacked graphene layers as a practical way of producing high-frequency magnetism in thin, electrically tunable metamaterials. Our results support the great potential of using graphene to achieve electrically tunable magnetic metamaterials.


The last decade has witnessed a vast body of literature on optical metamaterial designs that defy common intuition with achievements such as negative refraction1 and magnetic response at high frequencies,2,3 as well as promising applications for perfect lensing,4 invisibility cloaks5 and magnetic resonance imaging.6 In many studies, split-rings have become a central element because they are capable of supporting strong induced currents, leading to a resonant magnetic response down to the near infrared.7 Split-ring resonances can be driven by the excitation of plasmons that propagate along the ring circumference, particularly when its length is of the order of half the plasmon wavelength. This condition leads to the formation of a standing wave that is similar to that of a dipole antenna, as recently demonstrated by electron energy-loss spatially resolved spectroscopy.8

The performances of metamaterials are hampered by optical losses and by the lack of fast means to tune their spectral response. In this context, the potential of graphene as a novel plasmonic material has been considered9,10 because of two important properties that are advantageous for metamaterial design: (i) graphene plasmons have short wavelengths compared to the excitation wavelength11,12 and (ii) the frequencies of these plasmons can be electrically tuned by injecting charge carriers into the carbon sheet.13,14,15,16,17 Experimental evidence of these two properties has been recently obtained by spatially mapping localized optical modes in graphene ribbons.18,19 Thus, graphene split-rings (GSRs) are expected to display resonances for small sizes compared with traditional noble-metal split-rings. In addition, metamaterials formed by GSRs inherit the tunability of their atomically thin fabric.

In this paper, we investigate the magnetic response of GSRs. Specifically, we show that GSRs of suitable nanoscale dimensions can be used to produce strong magnetic responses under excitation by the electric field of an incident electromagnetic wave in the THz regime. Our results are supported by analytical theory and numerical electromagnetic simulations with the behavior of graphene described through its dynamic sheet conductivity. The latter can be approximated with the Drude model, which is robust in the low-frequency and strong-doping regimes,18

where is a constant with units of length/(time)2 and is proportional to the Fermi energy EF. The latter is defined with respect to the so-called Dirac point and depends on the charge carrier concentration n as . Here, υF≈106 m s−1 is the Fermi velocity. The damping rate γ is estimated from the DC mobility μ as (e.g., γ=1.3 meV for μ=10 000 cm2 V−1 s−1 and EF=0.5 eV). Lastly, due to the relatively large size of the GSR resonators (GSRRs), the scattering effects at the edges can be neglected.20


Figure 1a shows a characteristic GSR of diameter D=1 µm. We focused on normal-incidence excitation where the electric field is polarized across the GSR gap (y direction). This configuration produces an electric dipole along the external field direction and a current circulating around the ring. The latter generates a magnetic dipole perpendicular to the ring (z direction). The coupling to the ring is maximum at a wavelength 110 µm (>>D), as indicated by the GSR resonance feature observed in the simulated transmission and absorption spectra of Figure 1b, which were obtained by using a finite-element commercial code. Despite the small (compared to the excitation wavelength) size of the GSR resonators and the atomic thickness, the metamaterial presented clear resonant spectral features with transmission declining to 94% and absorption reaching 6%.

Figure 1

(a) A GSR resonator with diameter D, width W and gap distance g. (b) The normal-incidence transmittance (blue) and absorbance (red) spectra of a square split-ring array on monolayer graphene (solid curves) and monolayer gold (dotted curves). The geometrical parameters of the metamaterial array are W=g=D/10 with D=1 µm for graphene and D=8.19 µm for gold. According to Equation (7), the parameters yield resonance values within the same frequency range. The lattice spacing is 2D for both cases. Graphene is described by a Drude model with a Fermi energy of EF=0.5 eV and a damping constant of γ=1 meV. Gold is described by its bulk parameters, assuming a thickness equal to the distance between the (111) atomic planes (t=0.29 nm). The incident-field polarization is across the gap (y direction). GSR, graphene split-ring.

To understand the GSR response, we derived analytical expressions for the polarizability of a thin split-ring. Considering the small size of this structure compared with the excitation wavelength, we could work within the electrostatic approximation in which the self-consistent potential acting on the graphene is given by

where is the externally applied potential, f is 1 in the graphene area and 0 elsewhere,21 and the integral term represents the Coulomb potential produced by the induced charge. The latter is from the continuity equation in terms of the divergence of the induced current, and this is in turn given by the gradient of . We used dimensionless spatial units in the plane of the graphene. Equation (2) is also useful to study inhomogeneously doped graphene, with f proportional to the local Fermi energy.21 We considered normally incident far-infrared radiation linearly polarized along y so that the external potential became . Importantly, the frequency dependence and the response of the graphene were fully contained inside the dimensionless parameter η=(ω)/ωD. Incidentally, when graphene was placed at the interface between two dielectrics of permittivities ε1 and ε2, these expressions remain valid if we multiplied η by 2/(ε1+ε2).22 In matrix notation, Equation (2) reduced to , where is a Hermitian operator.23 It is convenient to expand the potential in terms of the eigenvectors of M plasmon resonances that emerge under the condition that 1/η equals one of the real eigenvalues of this operator, 1/ηp. Using Equation (1), the corresponding plasmon energy was ωp/2, where

The spectral width of the plasmon features was then identical with the intrinsic damping rate γ. This result is consistent with the resonance observed in Figure 1b, which has a quality factor Q=ωp/γλλ≈11. Lastly, we obtained the relevant elements of the polarizability tensor from the expressions

where jind was the induced surface current density in the graphene and the superscripts E and M stand for the electric and magnetic components, respectively. The induced current distribution is shown in Figure 2a at the resonance frequency, with the maximum values in the region opposite of the gap. Inserting the noted eigenmode expansion in Equation (4) and assuming a dominant split-ring plasmon mode, we find

Figure 2

(a) The on-resonance induced current in a GSR under the conditions described in Figure 1b. (b, c) The electric () and magnetic () polarizability densities: full simulation (solid curves) compared with the analytical expressions of Equation (5) for the parameters listed in the first row of Table 1. GSR, graphene split-ring.

where AE,M and BE,M are real dimensionless constants that only depend on the geometrical aspect ratios (i.e., g/D and W/D, see Figure 1a) and ωp is given by Equation (3). The resonances beyond the frequency range of interest contributed to a smooth background that was captured by BE,M. From the reciprocity theorem, we found that . All of the other components of α were non-resonant; therefore, we dismissed them. In particular, the polarization produced by an external field directed perpendicular to the gap [along x, see Figure 1a] only produced marginal non-resonant absorption at levels <0.1%. To quantify the strength of the magnetic and electric responses of the GSR resonator array, we introduced the corresponding electric and magnetic polarizability densities defined as:

Results and discussion

The results obtained by Equation (5) are shown in Figure 2b and 2c (dashed curves), together with the results of the numerical simulations for the polarizability densities (solid curves). The fitted parameters AE,M and BE,M were independent of frequency, ring size, graphene quality, and doping; therefore, we used Equation (5) to analyze a wide range of GSR conditions. The fitting values of AE,M, BE,M and ηp are given in Table 1 for GSRs with their representative geometrical aspect ratios.

Table 1 The fitting parameters AE,M, BE,M and ηp in the analytical expressions Equations (3) and (5) for GSRs with representative values of the aspect ratios (Figure 1a)

We were interested in assessing the capabilities of graphene compared to gold, which is generally regarded as an excellent standard for metamaterial structures. We considered the performance of split-rings fabricated on four different types of thin films: single-layer and stacked (in which layers can be separated by dielectric spacers24) graphene versus single-layer (one (111) atomic layer) and thin-film (20 nm) gold, respectively. For sufficiently thin structures (thickness t<<D), the Drude conductivity given by Equation (1) in combination with Equation (5) remains applicable. Expressing the parameter a in terms of the bulk plasma frequency as is convenient. In stacked graphene, an effective bulk frequency was obtained by simply multiplying the graphene conductivity by the number of graphene layers. Here, dz is the distance between those layers. Single-layer graphene is retrieved for t=dz. Considering dz=2 nm and EF=0.5 eV, we find that ωbulk≈1.2 eV, compared with 9 eV for gold.25 Obviously, there is some flexibility to reach lower ωbulk values for graphene by simply increasing the interlayer spacing dz. In addition, the intrinsic damping of gold is γ≈70 meV, compared with γ≈1 meV in graphene for the levels of doping and mobility under consideration. Therefore, graphene should allow us to operate well at lower energies than gold.

We compared the performances of these types of thin films (Figure 3). In particular, we examined the degree of confinement (Figure 3a), quantified through the ratio of the resonance wavelength to the ring diameter (λ/D), the quality factor Q=ωp/γ (Figure 3b), and the ratio of the magnetic polarizability density of monolayer (stacked) graphene over that of monolayer (thin) gold. We set the aspect ratios to W/D=g/D=0.1, and we used these expressions with the ring diameter required to obtain the resonance frequency ωp running along the horizontal axis (Equation (3)). Namely,

Figure 3

(a) The confinement factor and (b) the quality factor for single-layer graphene (red), single- atomic-layer gold (thickness t=0.29 nm, blue), 20-nm gold film (thin gold, cyan) and 10 layers of stacked graphene with an interlayer spacing of 2 nm (multilayer graphene, magenta). (c) The ratio of the magnetic polarizability density of graphene to that of gold, . Red corresponds to the ratio of monolayers of the two materials, while magenta refers to the ratio of stacked graphene to thin gold. The solid regions spanned by graphene correspond to a Fermi energy range of 0.5–1 eV. The loss thresholds associated with optical phonons in graphene at energies >0.2 eV and with interband transitions in gold at energies greater than 2.5 eV are indicated by the vertical dotted lines. The quality factor in (b) is independent of the thickness. Gold is described based on its measured permittivity.25

Considering the realistic mobilities assumed here (μ≈13 000 cm2 V−1 s−1),26,27 graphene offers a suitable alternative to fabricate resonant split-rings with Q>1 down to the THz regime (Figure 3b) with a degree of confinement that is greater than what is achieved by noble metals for similar thicknesses and frequencies (Figure 3a). In fact, at far-IR wavelengths (longer than 100 µm), the confinement factor for thin gold is smaller than one. This finding indicates that in contrast to stacked graphene, thin gold SRR arrays lie in the diffraction rather than in the metamaterial regime, whereas the corresponding quality factor is much smaller than 1. A comparison between the magnetic response of single-layer gold and single-layer graphene reveals that doped single-layer graphene can provide a stronger magnetic response than single-layer gold at frequencies higher than 1 THz. The difference between these two materials nearly reaches an order of magnitude when considering strongly doped graphene. The magnetic responses of monolayer and stacked graphene are considerably weaker than the response of thin gold. However, this picture could significantly improve with the availability of higher mobility graphene28 subjected to stronger doping.29,30


In conclusion, graphene has emerged as a tunable material that allows the fabrication of ultrathin metamaterials. A central element of these metamaterials (split-rings) is shown here, displaying resonances with unprecedented levels of field confinement. Thus, graphene monolayers can be used to reach the true homogenization limit (D<<λ) with the additional advantage of having an electrically tunable optical response, which can be beneficial for the fabrication of compact, versatile metamaterials down to the terahertz regime.


  1. 1

    Smith DR, Pendry JB, Wiltshire MC . Metamaterials and negative refractive index. Science 2004; 305: 788–792.

    ADS  Article  Google Scholar 

  2. 2

    Yen TJ, Padilla WJ, Fang N, Vier DC, Smith DR et al. Terahertz magnetic response from artificial materials. Science 2004; 303: 1494–1496.

    ADS  Article  Google Scholar 

  3. 3

    Grigorenko AN, Geim AK, Gleeson HF, Zhang Y, Firsov AA et al. Nanofabricated media with negative permeability at visible frequencies. Nature 2005; 438: 335–338.

    ADS  Article  Google Scholar 

  4. 4

    Pendry JB . Negative refraction makes a perfect lens. Phys Rev Lett 2000; 85: 3966–3969.

    ADS  Article  Google Scholar 

  5. 5

    Schurig D, Mock JJ, Justice BJ, Cummer SA, Pendry JB et al. Metamaterial electromagnetic cloak at microwave frequencies. Science 2006; 314: 977–980.

    ADS  Article  Google Scholar 

  6. 6

    Wiltshire MC, Pendry JB, Young IR, Larkman DJ, Gilderdale DJ et al. Microstructured magnetic materials for RF flux guides in magnetic resonance imaging. Science 2001; 291: 849–851.

    ADS  Article  Google Scholar 

  7. 7

    Enkrich C, Wegener M, Linden S, Burger S, Zschiedrich L et al. Magnetic metamaterials at telecommunication and visible frequencies. Phys Rev Lett 2005; 95: 203901.

    ADS  Article  Google Scholar 

  8. 8

    Boudarham G, Feth N, Myroshnychenko V, Linden S, García de Abajo FJ et al. Spectral imaging of individual split-ring resonators. Phys Rev Lett 2010; 105: 255501.

    ADS  Article  Google Scholar 

  9. 9

    West P, Ishii S, Naik GV, Emani NK, Shalaev VM et al. Searching for better plasmonics materials. Laser Photonics Rev 2010; 4: 795–808.

    ADS  Article  Google Scholar 

  10. 10

    Tassin P, Koschny T, Kafesaki M, Soukoulis CM . A comparison of graphene, superconductors and metals as conductors for metamaterials and plasmonics. Nat Photon 2012; 6: 259–264.

    ADS  Article  Google Scholar 

  11. 11

    Jablan M, Buljan H, Soljacic M . Plasmonics in graphene at infrared frequencies. Phys Rev B 2009; 80: 245435.

    ADS  Article  Google Scholar 

  12. 12

    Koppens FH, Chang DE, García de Abajo FJ . Graphene plasmonics: a platform for strong light–matter interactions. Nano Lett 2011; 11: 3370–3377.

    ADS  Article  Google Scholar 

  13. 13

    Wunsch B, Stauber T, Sols F, Guinea F . Dynamical polarization of graphene at finite doping. New J Phys 2006; 8: 318.

    Article  Google Scholar 

  14. 14

    Hwang EH, Das Sarma S . Dielectric function, screening, and plasmons in two-dimensional graphene. Phys Rev B 2007; 75: 205418.

    ADS  Article  Google Scholar 

  15. 15

    Fei Z, Andreev GO, Bao W, Zhang LM, McLeod AS et al. Infrared nanoscopy of Dirac plasmons at the graphene–SiO2 interface. Nano Lett 2011; 11: 4701–4705.

    ADS  Article  Google Scholar 

  16. 16

    Ju L, Geng B, Horng J, Girit C, Martin M et al. Graphene plasmonics for tunable terahertz metamaterials. Nat Nanotech 2011; 6: 630–634.

    ADS  Article  Google Scholar 

  17. 17

    Fang ZY, Thongrattanasiri S, Schlather A, Liu Z, Ma LL et al. Gated tunability and hybridization of localized plasmons in nanostructured graphene. ACS Nano 2013; 7: 2388–2395.

    Article  Google Scholar 

  18. 18

    Chen J, Badioli M, Alonso-González P, Thongrattanasiri S, Huth F et al. Optical nano-imaging of gate-tunable graphene plasmons. Nature 2012; 487: 77–81.

    ADS  Article  Google Scholar 

  19. 19

    Fei Z, Rodin AS, Andreev GO, Bao W, McLeod AS et al. Gate-tuning of graphene plasmons revealed by infrared nano-imaging. Nature 2012; 487: 82–85.

    ADS  Article  Google Scholar 

  20. 20

    Thongrattanasiri S, Manjavacas A, García de Abajo FJ . Quantum finite-size effects in graphene plasmons. ACS Nano 2012; 6: 1766–1775.

    Article  Google Scholar 

  21. 21

    Thongrattanasiri S, Silveiro I, García de Abajo FJ . Plasmons in electrostatically doped graphene. Appl Phys Lett 2012; 100: 201105.

    ADS  Article  Google Scholar 

  22. 22

    Christensen J, Manjavacas A, Thongrattanasiri S, Koppens FHL, García de Abajo FJ . Graphene plasmon waveguiding and hybridization in individual and paired nanoribbons. ACS Nano 2012; 6: 431–440.

    Article  Google Scholar 

  23. 23

    Ouyang F, Isaacson M . Surface plasmon excitation of objects with arbitrary shape and dielectric constant. Philos Mag B 1989; 60: 481–492.

    ADS  Article  Google Scholar 

  24. 24

    Yan H, Li X, Chandra B, Tulevski G, Wu Y et al. Tunable infrared plasmonic devices using graphene/insulator stacks. Nat Nanotech 2012; 7: 330–334.

    ADS  Article  Google Scholar 

  25. 25

    Johnson PB, Christy RW . Optical constants of the noble metals. Phys Rev B 1972; 6: 4370–4379.

    ADS  Article  Google Scholar 

  26. 26

    Novoselov KS, Geim AK, Morozov SV, Jiang D, Zhang Y et al. Electric field effect in atomically thin carbon films. Science 2004; 306: 666–669.

    ADS  Article  Google Scholar 

  27. 27

    Novoselov KS, Geim AK, Morozov SV, Jiang D, Katsnelson MI et al. Two-dimensional gas of massless Dirac fermions in graphene. Nature 2005; 438: 197–200.

    ADS  Article  Google Scholar 

  28. 28

    Bolotin KI, Sikes KJ, Jiang Z, Klima M, Fudenberg G et al. Ultrahigh electron mobility in suspended graphene. Solid State Commun 2008; 146: 351–355.

    ADS  Article  Google Scholar 

  29. 29

    Chen CF, Park CH, Boudouris BW, Horng J, Geng B et al. Controlling inelastic light scattering quantum pathways in graphene. Nature 2011; 471: 617–620.

    ADS  Article  Google Scholar 

  30. 30

    Khrapach I, Withers F, Bointon TH, Polyushkin DK, Barnes WL et al. Novel highly conductive and transparent graphene-based conductors. Adv Mater 2012; 24: 2844–2849.

    Article  Google Scholar 

Download references


This work has been supported by the Spanish MICINN (MAT2010-14885 and Consolider, the European Commission (FP7-ICT-2009-4-248909-LIMA and FP7-ICT-2009-4-248855-N4E), the EPSRC (UK) and the Leverhulme Trust and the MOE Singapore (grant MOE2011-T3-1-005).

Author information



Corresponding authors

Correspondence to Nikitas Papasimakis or FJ García de Abajo.

Rights and permissions

This work is licensed under a Creative Commons Attribution-NonCommercial-Share Alike 3.0 Unported License. To view a copy of this license, visit

Reprints and Permissions

About this article

Cite this article

Papasimakis, N., Thongrattanasiri, S., Zheludev, N. et al. The magnetic response of graphene split-ring metamaterials. Light Sci Appl 2, e78 (2013).

Download citation


  • artificial magnetism
  • graphene
  • graphene plasmons
  • metamaterials
  • plasmonics

Further reading


Quick links