Abstract
Generally, highly efficient liquid transfer is difficult to achieve in open fibrous systems, as compared with traditional closed systems, because capillary coalescence frequently occurs when fiber arrays interact with a liquid. Dandelion pappi, which are flexible fiber arrays with open radial geometries, exhibit the unique ability to capture and hold large amounts of water steadily. Drawing inspirations from this natural system, we developed an artificial flexible glass fiber array with a radial geometry that is capable of holding large volumes of liquid and controllably transferring the liquid onto a substrate. The highly efficient liquid transfer of the open fibrous array can be attributed to the synergistic effects of the flexibility of fibers that radially arranged with a big open angle that enables a distinct elastic deformation of the fibers and the consequent formation of a large space within the fiber array for liquid storage, and the highly adhesive property of fibers that helps the pining of three-phase contact line on the fibers. This unique open system may provide a novel strategy for highly efficient and controllable liquid transfer.
Similar content being viewed by others
Introduction
Fibrous structures are widely distributed and abundant in nature, providing versatile functions such as thermal insulation, motion assistant and light reflectivity that aid in the survival of living organisms and help them to better adapt to the local environment.1, 2, 3, 4, 5 Among the many functions imparted by fibrous structures, their wettability at both the micro- and macro-scale is very important because it can facilitate or even determine the manner in which organisms interact with the surrounding environment.4, 5, 6 As our recent studies revealed, the spider silk with unique periodic spindle-knot and joints can harvest water from humid air,4 certain cactus species with conical spines can efficiently collect fog5 and certain fish with anisotropic hook-like spines exhibit self-cleaning under water.7 It has also been suggested that the nanowire-structured bristles of gecko feet enable high adhesion to solid and liquid drops arising from the wetting-induced structure rebuilding of the nanowire array.8, 9 Such natural phenomena have inspired materials scientists to more closely examine the wetting behavior of fibrous media,10, 11, 12, 13 resulting in the development of numerous bio-inspired artificial fibrous systems with special wettability properties. To date, most endeavors have focused on developing either anisotropic fibers for water collection4, 5 and pumping14 or a vertically aligned fiber array for controllable morphologies through capillarity-induced self-assembly.12, 15 It has been demonstrated that fibrous arrays can realize versatile dynamic wetting superior to traditional closed systems (such as tubes and channels).16, 17, 18 For example, artificial spider silk made from hydrophilic poly(ethylene glycol) and hydrophobic polystyrene can harvest water from humid air,19 and polymer conical needle arrays can separate micro-sized oil droplets from water.20 Moreover, open fibrous arrays enjoy the advantages of easy preparation, low cost and low hydrodynamic resistance.14, 19 However, manipulating liquid in open fibrous systems is rarely reported and remains a significant challenge,21 because capillary coalescence is frequently encountered when fiber array interacted with a liquid.22
Here, we describe the special dynamic wetting behavior of dandelion pappi. A large mass of water can be encapsulated by an open array of pappi arranged in a radial geometry with a large open angle. We demonstrated that the flexibility and highly adhesive ability of the pappus fiber, associated with the hydrophilic annular pulvinus, played a crucial role in efficiently encapsulating liquid in such an open fiber array. The highly adhesive pappus and hydrophilic annular pulvinus impart a large adhesive force to water that helps to pin the three-phase contact line during interaction with liquid. The elasticity of the pappi arranged with large open angles enables a distinct elastic deformation under the joint forces of surface tension and hydrostatic pressure during interaction with liquid. Thus, a large space is generated within the deformed pappi for liquid storage. Inspired by these findings, we developed an artificial flexible fiber array with an open radial geometry that mimics the structural features of dandelion pappi and the highly efficient liquid transfer was realized. We envision that such an open system may provide a novel strategy for highly efficient and controllable liquid transfer.
Experimental procedures
Materials
Dandelion seeds were picked fresh from the grassland of Beihang University (39.98° N, 116.34° E). Flexible glass fibers with a diameter of ∼20 μm and a bending stiffness B=5.6 × 10−10 N m−2 were purchased from Taishan Fiberglass, Inc. (Shandong, China). Hydrophilic glue-modified acrylate adhesive was purchased from Tianjin Weldmaster Technological Development Co., Ltd. (Tianjin, China).
Procedures
Characterization of the material morphology and structure
Optical images were acquired with a camera (Canon EOS40D, Tokyo, Japan). The microstructures of the dandelion seeds and the artificial conical fibers were investigated by scanning electron microscopy (JEOL, JSM-6700F, Tokyo, Japan) at an accelerating voltage of 3.0 kV.
Measurement of the adhesive force of the fibers
The adhesive force measurement of the pappus to water was performed using a high-sensitivity micro-electromechanical balance system (DataPhysics DCTA 11, Filderstadt, Germany). A water droplet (1 μl) was suspended on a copper cap connected to the microbalance. A single pappus was then moved toward the water droplet at a speed of 0.02 mm s−1 until it contacted the water droplet. The shape changes of the water droplet and the force variations were recorded by a digital video camera (WV-CP280/CH, Panasonic, Osaka, Japan) and the microbalance, respectively.
Preparation of an open radial conical glass fiber array
Flexible conical glass fibers were prepared by a standard electrochemical method. First, commercial flexible glass fibers were rinsed with deionized water and dried with nitrogen. Next, the clean fibers were held vertically close to a container filled with hydrofluoric acid on a programmed lift table. By moving the lift table up and down at a 0.5 mm s−1 speed, the glass fibers were etched to achieve conical shapes. The flexible conical glass fibers of the same diameter and length were then fixed radially and uniformly onto the edge of a rigid polymer rod to fabricate a dandelion-inspired artificial open radial system.
Process of water entrapment
The water-entrapping properties of the dandelion and the dandelion-inspired artificial system were evaluated using a DataPhysics OCA20 system with a moving platform and a CCD camera. The process was recorded by the CCD camera.
Results and discussion
Water encapsulation by dandelion pappi
Taraxacum officinale, often simply called dandelion, is a common composite perennial of the Asteraceae family that can be found growing in many temperate and moist regions of the world.23 The capitulum of the dandelion contains hundreds of seeds forming a ball of fluff (Figure 1a) when the dandelion seeds are ripe. The main part of each seed unit is the flying appendant of white pappus that is connected with the achene by a beak. The most attractive feature of the dandelion is that the seeds are easily detached from the mother plant by wind after maturity to parachute the seeds elsewhere for the start of the next generation.24 Interestingly, we observed another intriguing but less-studied feature in that a large water droplet can be encapsulated by the pappi of the dandelion seed after it rains (Figure 1b). As shown in Figure 1b, the dandelion seed was capable of capturing a large dew droplet within the pappi. Even for downward-oriented pappi, the droplets are readily held in place with little distortion in their spherical shape, as indicated by the arrows in Figure 1b. This phenomenon strongly suggested that the open system of dandelion seed pappi could hold a relatively large volume of water that could potentially be used to facilitate its growth and maturation.25
To explore the unique ability of dandelion pappi to encapsulate water, a single dandelion seed was evaluated and inversely fixed on the holder of a motorized precision translation stage (OCA20, DataPhysics) capable of smooth movement at a speed of v=1.7 mm s−1 toward a static water surface (Figure 1c1). A camera was used to record this process. When the pappi of the dandelion seed were pressed downwards into the water, they did not penetrate the air–water interface until they were vertically moved to a position ∼0.4 cm below the surface of the water (Figure 1c2). During their interaction with the water surface (Supplementary Figure S1), the pappi bent upwards, producing a water dimple (Figure 1c2). This behavior can be ascribed to the hydrophobicity of the pappus (Supplementary Figure S2) and the surface tension of the water between the neighboring pappi, as has been suggested for Nymphoides flowers.26 Surprisingly, the hydrophobic pappi held a relatively large water droplet after detachment from the water surface (Figure 1c4). After pulling the pappi vertically upwards, the liquid adhering to the pappi was also drawn upwards, forming a water column between the pappi and the water interface (Figure 1c3). After the pappi were fully detached from the air–water interface, there was a large water droplet that was cooperatively encapsulated by the numerous deformed pappi (Figure 1c4). Quantitatively, a considerable mass of liquid (up to 96 times the weight of the pappi) could be captured, demonstrating that the open dandelion pappi array is capable of highly efficient liquid storage.
Structure of the dandelion pappus
The dandelion pappi system is a typical macroscopic open radial fibrous array, where hundreds of fibrous pappi with hierarchical anisotropic microstructures are radially arranged on the annular pulvinus (center plate) (Figures 2a and c). The top-view image of a dandelion seed in Figure 2c illustrates that the pappi are radially arranged on the pulvinus at the top of the beak. Each dandelion seed contains ∼113±11 pappi that are oriented in a radial pattern with an open angle, 2β, of ∼160° to 180°. To investigate their structures in detail, we used scanning electron microscope to observe individual pappus and the pulvinus (Figures 2d–f). The main body of the pappus has a tapered architecture with the diameter successively increasing from an average of ∼10 μm at its tip to an average of ∼40 μm at the butt end (Figure 2e and Supplementary Figure S3). Considering that a single pappus is ∼0.5 cm in length, the single-celled cellulose fiber pappus27 has a high aspect ratio of 300±100, making it mechanically flexible (Supplementary Figure S4). Moreover, many elaborate microspines and aligned microgrooves are evident on each pappus, forming a unique hierarchical structure that provides many anchoring points for pinning the three-phase contact line.28 We also noticed that the pulvinus had a sucker-like structure with a protuberant closed circle in the middle (Figure 2f1). This structure favors pinning of the liquid because of the close contact with the water29 in conjunction with the radially distributed rough-textured geometry on its surrounding areas (Figures 2f2 and f3).
Physical mechanism for highly efficient water capture
It is proposed that the special wettability of the pappus and the annular pulvinus significantly contributes to the highly efficient liquid capture/encapsulation of dandelion pappi. For a single pappus with a diameter of ∼20 μm, there was high adhesion to water (Figure 3a and Supplementary Figures S5 and S6). As suggested in Figure 3a, a water droplet (1 μl) can tightly adhere to a single pappus and become deformed when detached from the pappus, with a small amount of residuum on the pappus. The measured adhesive force of water on a single pappus is larger than 9.75±0.9 μN when evaluated using a water droplet of 1 μl (Supplementary Figure S6). Moreover, the pulvinus of the dandelion is hydrophilic, such that water can easily adhere and become pinned on it (Figure 3b). Taken together, the pappi and the pulvinus both display high adhesion to water that is favorable for the pinning the three-phase contact line when the structure is detached from the air–water interface.
When capturing water, the water adhering to the pulvinus is drawn upward, forming a water column when the dandelion pappi are pulled off the water surface. Through the combined effect of the pappus bending deformation, a relatively large water droplet can be encapsulated by the open radial fibers. In this procedure, the elasticity of the pappus allows it to deform under the joint forces of the surface tension and the hydrostatic pressure (Figure 3c). For a flexible dandelion pappi, the elastic bending force (Fe) that is generated from the deformation of the fiber can be expressed as:
where θ is the local angle between the x axis and the fiber, l is the horizontal displacement of the deformed fiber, E is the Young’s modulus of the fiber and I=πd4/64 is the second moment of the area of the section of the fiber with diameter d. The adhesion force (Fa) is equal to surface tension force (Fγ) that can be expressed as:
per unit length, where γ is the water surface tension and s is the arc length along the fiber spanning from 0 to l. The hydrostatic pressure can be expressed as:
where n=−sinθex+cosθey is the unitary vector normal to the upper face.30 For a point (A′), when immediately withdrawn from the water interface, the Fγ and Fh are constant, whereas Fe decreases with an increase in l, suggesting that the elastic deformation of the fibers increases to form a larger space between the fibers for liquid storage. The tips of the pappi then aggregate once the pappi leave the water interface to encapsulate the water droplet. From this analysis, we can conclude that the flexibility of the radially arranged pappi with a large open angle, associated with its high adhesiveness to water, allow the dandelion pappi to efficiently capture water. Another favorable driving force is the Laplace pressure from the conical structures of the pappi that can further hold the encapsulated water within the dandelion pappi.
To understand the dynamic water capture process, a model of ‘two radially arranged flexible glass fibers’ was constructed, where a pair of conical flexible glass fibers was fixed to a rigid polymer rod using hydrophilic glue at one side and arranged in plane with an open angle, 2β, of ∼176° (Figure 3d1). A dip-withdrawal experiment was then carried out to model the water-encapsulation phenomenon of the flexible dandelion pappi (Figures 3d1–d4). It is noted that the open angle of the flexible glass fibers decreased as the fibers were withdrawn from the water. Simultaneously, a water column was pinned on the fibers and moved with them during withdrawal from the air–water interface. Thus, the model system exhibited essentially the same behavior as the natural dandelion pappi. Here, the glass fiber exhibited a rather high adhesion to water, resulting in a high adhesive force larger than 22.5±0.9 μN (Supplementary Figure S7a). The rigid polymer (Supplementary Figure S7b1) that was coated using a layer of hydrophilic glue is a typical hydrophilic surface with a water contact angle of 68.7±1.1° (Supplementary Figure S7b2). Resembling that of natural pappi system, the high adhesiveness of glass fibers and the polymer were beneficial for pinning the three-phase contact line during withdrawal from the water surface. The role of the adhesiveness of the fibers in water capture is further evidenced by the fact that ethanol with a much smaller surface tension of 22.7 mN m−1 compared with water (72.8 mN m−1) cannot be encapsulated within the fibers (Supplementary Figure S8). As mentioned above, Fa is equal to Fγ that decreases dramatically with decreasing surface tension. Thus, the adhesive force that is generated from the surface tension becomes insufficient to bend the fiber, and deformation of the fiber cannot occur. As a result, ethanol cannot be encapsulated by dandelion pappi (Supplementary Figure S8).
The large open angle of the glass fibers enables maximum fiber bending by virtue of the fiber elasticity, resulting in the formation of a large space between the fibers where liquid can be encapsulated. The elastic force can be dynamically balanced by the joint forces of the surface tension and the hydrostatic pressure (Figure 3c). Here, the open angle of the radial fiber array is directly related to the elastic bending deformation of the fibers that plays a crucial role in the highly efficient water capture process. To explore the role of the open angle, we conducted another experiment in which pairs of flexible glass fibers were arranged in a vertically parallel manner, such that the open angle, 2β, was zero (Figure 4a1). A different situation occurred when these fibers were withdrawn from the air–water interface. Capillary coalescence occurred, allowing the fiber array to hold only a small volume of water (Figures 4a2–a4). This indicates that changing the open angle of the fibers can vastly impair their ability to capture liquid. Because the open angle between the glass fibers is so small that the elastic deformation corresponding to the bending moment is also extremely small, only a very narrow space can be formed between the fibers. Thus, when withdrawn from the liquid, the fiber array cannot form a water column and instead the fibers coalesce, allowing only a limited amount of liquid to be encapsulated by the parallel glass fibers (Figures 4a1–a4). The small open angle between glass fibers easily induces elastocapillary coalescence, causing aggregation of the glass fibers (Supplementary Figure S9).22 Thus, the large open angle between the flexible fibers generates a beneficial elastic curvature, corresponding to the large space, that can hold liquid, making it possible to capture liquid with high efficiency.
Highly efficient liquid transfer by an artificial glass fiber array with an open radial geometry
Inspired by this finding, we fabricated an open radial fiber array to mimic the geometry of the dandelion pappi in which flexible glass fibers were fixed radially and uniformly onto the edge of one side of a rigid polymer rod (Figures 5A and B) by hydrophilic glue. Moreover, the tips of the flexible glass fibers were chemically etched into a conical shape (Figures 5C and D) in hydrofluoric acid. Using this artificial open radial fiber array, we achieved highly efficient liquid retention with the weight of the water encapsulated as high as ∼117 times that of the fibers. As suggested by Figure 5E, the radial glass fibers deformed upon interacting with the water. A water column with a large mass adhered to the fiber array during the withdrawal process. Consequently, a large volume of water was encapsulated in the fiber array after detachment from the air–water interface. This also demonstrates the crucial roles of the radial arrangement of fibers and their adhesive properties for holding and transferring water efficiently.
For the artificial fiber array, we evaluated the effect of the number and the length of flexible glass fibers on the liquid capturing ability, as summarized in Figure 5F. For a fixed length of flexible glass fibers, our bio-inspired system could encapsulate more liquid as the number of individual fibers increased. For the system with same number of flexible glass fibers, the amount of captured water increased with increasing fiber length up to a certain length, where longer fibers decreased the amount of water captured. We assume that the critical length, Lcrit, is the optimal length in our bio-inspired radial fiber array that shows a maximum water capturing ability. For L<Lcrit such that the length of the fibers is short, the fibers cannot completely encapsulate the water droplet because of their impaired elasticity. Consequently, a relatively small water droplet was captured by the fiber array. For glass fibers beyond the critical length, L>Lcrit, the cooperative effect of aggregation caused by elastocapillary imbibition, as well as by gravity, also leads to the capture of relatively smaller droplets of water. Here, the critical length of ∼0.5, 0.9 and 1.0 cm was given for the radial fiber array composed of 20, 40 and 80 fibers, respectively, making the aspect ratio similar to that of natural pappi. Only when the tips of the fibers aggregate together at the critical length can the fibers display maximum deformation to capture the largest volumes of water.
Conclusion
Here, we revealed a novel open geometry fiber system (that is, dandelion pappi) that enables the encapsulation of a large volume of water. We propose that the radially arranged flexible pappi (fibers) with large open angles and the high adhesion properties of the pappi and the pulvini play a key role in the liquid manipulation ability of this open fibrous system. Theoretical analysis demonstrated that large volumes of water can be steadily held within this topologically structured open fibrous array by the cooperative effect of the elasticity of the pappi that is responsible for balancing the joint forces of the surface tension and hydrostatic pressure of the liquid, and the high adhesiveness of the fibers that pins the three-phase contact line. Inspired by this finding, we designed an artificial radial fiber array to mimic the structural features of dandelion pappi. We observed identical liquid handling abilities between the artificial system and the dandelion pappi. Liquid was captured by the artificial radial array with a remarkably high efficiency. Moreover, the liquid retention could be tuned by varying the number of fibers and their lengths. Furthermore, these bio-inspired fiber arrays can perform controllable liquid transfer, as demonstrated by multiple rounds of transfer of the liquid onto a substrate in a controllable manner (Supplementary Figure S10). We envision that this open system may provide a novel strategy for highly efficient liquid transfer in a well-controlled manner.
References
Vigneron, J. P., Rassart, M., Vértesy, Z., Kertész, K., Sarrazin, M., Biró, L. P., Ertz, D. & Lousse, V. Optical structure and function of the white filamentary hair covering the edelweiss bracts. Phys. Rev. E Stat. Nonlin. Soft Matter Phys. 71, 011906 (2005).
Autumn, K., Liang, Y. A., Hsieh, S. T., Zesch, W., Chan, W. P., Kenny, T. W., Fearing, R. & Full, R. J. Adhesive force of a single gecko foot-hair. Nature 405, 681–685 (2000).
Gao, X. F. & Jiang, L. Water-repellent legs of water striders. Nature 432, 36 (2004).
Zheng, Y. M., Bai, H., Huang, Z. B., Tian, X. L., Nie, F. Q., Zhao, Y., Zhai, J. & Jiang, L. Directional water collection on wetted spider silk. Nature 463, 640–643 (2010).
Ju, J., Bai, H., Zheng, Y. M., Zhao, T. Y., Fang, R. C. & Jiang, L. A multi-structural and multi-functional integrated fog collection system in cactus. Nat. Commun. 3, 2253 (2012).
Wang, Q. B., Su, B., Liu, H. & Jiang, L. Chinese brushes: controllable liquid transfer in ratchet conical hairs. Adv. Matter 26, 4889–4894 (2014).
Cai, Y., Lin, L., Xue, Z. X., Liu, M. J., Wang, S. T. & Jiang, L. Filefish-inspired surface design for anisotropic underwater oleophobicity. Adv. Funct. Mater. 24, 809–816 (2013).
Hansen, W. R. & Autumn, K. Evidence for self-cleaning in gecko setae. Proc. Natl Acad. Sci. USA 102, 385–389 (2005).
Liu, K. S., Du, J. X., Wu, J. T. & Jiang, L. Superhydrophobic gecko feet with high adhesive forces towards water and their bio-inspired materials. Nanoscale 4, 768–772 (2012).
Bico, J., Roman, B., Moulin, L. & Boudaoud, A. Adhesion: elastocapillary coalescence in wet hair. Nature 432, 690 (2004).
Duprat, C., Protiere, S., Beebe, A. Y. & Stone, H. A. Wetting of flexible fiber arrays. Nature 482, 510 (2012).
Liu, H., Li, S. H., Zhai, J., Li, H. J., Zheng, Q. S., Jiang, L. & Zhu, D. B. Self-assembly of large-scale micropatterns on aligned carbon nanotube films. Angew. Chem. Int. Ed. 43, 1146–1149 (2004).
Liu, H., Zhai, J. & Jiang, L. Wetting and anti-wetting on aligned carbon nanotube films. Soft Matter 2, 811–821 (2006).
Huang, J. Y., Lo, Y. C., Niu, J. J., Kushima, A., Qian, X. F., Zhong, L., Mao, S. X. & Li, J. Nanowire liquid pumps. Nat. Nanotechnol. 8, 277–281 (2013).
Pokroy, B., Kang, S. H., Mahadevan, L. & Aizenberg, J. Self-organization of a mesoscale bristle into ordered, hierarchical helical assemblies. Science 323, 237–240 (2009).
Teh, S. Y., Lin, R., Hung, L. H. & Lee, A. P. Droplet microfluidics. Lab. Chip. 8, 198–200 (2008).
Liu, J. X., Ma, S. H., Wei, Q. B., Jia, L., Yu, B., Wang, D. A. & Zhou, F. Parallel array of nanochannels grafted with polymer-brushes-stabilized Au nanoparticles for flow-through catalysis. Nanoscale 5, 11894–11901 (2013).
Reis, P. M., Hure, J., Jung, S., Bush, J. W. M. & Clanet, C. Grabbing water. Soft Matter 6, 5705–5708 (2010).
Tian, X. L., Bai, H., Zheng, Y. M. & Jiang, L. Bio-inspired heterostructured bead-on-string fibers that respond to environmental wetting. Adv. Funct. Mater. 21, 1398–1402 (2011).
Li, K., Ju, J., Xue, Z. X., Ma, J., Feng, L., Gao, S. & Jiang, L. Structured cone arrays for continuous and effective collection of micron-sized oil droplets from water. Nat. Commun. 4, 3276 (2013).
Nakajima, A. Design of hydrophobic surfaces for liquid droplet control. NPG Asia Mater. 3, 49–56 (2011).
Py, C., Bastien, R., Bico, J., Roman, B. & Boudaoud, A. 3D aggregation of wet fibers. EPL-Europhys. Lett. 77, 44005 (2007).
Uhlemann, I., Kirschner, J. & Štěpánek, J. The genusTaraxacum (Asteraceae) in the southern hemisphere. I. The sectionAntarctica Handel-Mazzetti and notes on dandelions of Australasia. Folia Geobot. 39, 205–220 (2004).
Tackenberg, O., Poschlod, P. & Kahmen, S. Dandelion seed dispersal: the horizontal wind speed does not matter for long-distance dispersal-it is updraft!. Plant Biol. 5, 451–454 (2003).
Hale, A. N., Imfeld, S. M., Hart, C. E., Gribbins, K. M., Yoder, J. A. & Collier, M. H. Reduced seed germination after pappus removal in the North American dandelion (Taraxacum officinale; Asteraceae). Weed Sci. 58, 420–425 (2010).
Armstrong, J. E. Fringe science: are the corollas of Nymphoides (Menyanthaceae) flowers adapted for surface tension interactions? Am. J. Bot. 89, 362–365 (2002).
Greene, D. F. The role of abscission in long-distance seed dispersal by the wind. Ecology 86, 3105–3110 (2005).
Heng, L. P., Su, J. X., Zhai, J., Yang, Q. L. & Jiang, L. Dual high adhesion surface for water in air and for oil underwater. Langmuir 27, 124611–12471 (2011).
Jin, M. H., Feng, X. J., Feng, L., Sun, T. L., Zhai, J., Li, T. & Jiang, L. Superhydrophobic aligned polystyrene nanotube films with high adhesive force. Adv. Mater. 17, 1977–1981 (2005).
Rivetti, M. & Antkowiak, A. Elasto-capillary meniscus: pulling out a soft strip sticking to a liquid surface. Soft Matter 9, 6226–6234 (2013).
Acknowledgements
We are grateful for financial support from the National Research Fund for Fundamental Key Projects (2013CB933000), Program for New Century Excellent Talents in University (NCET-13-0024), Fok Ying Tong Education Foundation (132008), National Natural Science Foundation (61227902, 21121001, 91127025), the Key Research Program of the Chinese Academy of Sciences (KJZD-EW-M01), the 111 Project (No. B14009) and the Fundamental Research Funds for the Central Universities (YWF-14-HXXY-015).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The authors declare no conflict of interest.
Additional information
Supplementary Information accompanies the paper on the NPG Asia Materials website
Supplementary information
Rights and permissions
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/
About this article
Cite this article
Meng, Q., Wang, Q., Liu, H. et al. A bio-inspired flexible fiber array with an open radial geometry for highly efficient liquid transfer. NPG Asia Mater 6, e125 (2014). https://doi.org/10.1038/am.2014.70
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/am.2014.70
This article is cited by
-
Dandelion pappus morphing is actuated by radially patterned material swelling
Nature Communications (2022)
-
Soft Fibrous Structures in Nature as Liquid Catcher
Acta Mechanica Solida Sinica (2019)
-
Pyrolysed cellulose nanofibrils and dandelion pappus in supercapacitor application
Cellulose (2017)
-
Bio-inspired flexible fiber brushes that keep liquids in a controlled manner by closing their ends
NPG Asia Materials (2016)