Abstract
Nanofiber with porous structures were prepared by electrospray deposition (ESD) from poly(vinylidene fluoride) (PVDF)/poly(vinylpyrrolidone) (PVP) blend and subsequent selective removal of PVP. In the present work, the effect of blending ratio of PVDF/PVP on formation of the pore and crystal structure of residual PVDF fiber was investigated. The residual PVDF nanofiber showed a higher specific surface area (the highest specific surface area was 28.54 m2/g from PVDF/PVP = 67/33 w/w). The Fourier transform infrared spectroscopy and wide angle X-ray diffraction measurement also showed that selective removal of PVP enhanced the formation of β-phase crystal structure in PVDF nanofiber (β-phase content > 90%).
Similar content being viewed by others
Article PDF
References
P. Gibson, H. Schreuder-Gibson, and D. Rivin, Colloids Surf., A, 187–188, 469 (2001).
V. Z. Mordkovich, Theor. Found. Chem. Eng., 37, 429 (2003).
G. Zhang, W. Kataphinan, R. Teye-Mensah, P. Katta, L. Khatri, E. A. Evans, G. G. Chase, R. D. Ramsier, and D. H. Reneker, Mater. Sci. Eng., B, 116, 353 (2005).
R. J. Tseng, J. Huang, J. Ouyang, R. B. Kaner, and Y. Yang, Nano Lett., 5, 1077 (2005).
S. Zhang, Nat. Biotechnol., 21, 1171 (2003).
S. Virji, R. B. Kaner, and B. H. Weiller, J. Phys. Chem. B, 110, 22266 (2006).
Z. Ma, M. Kotaki, R. Inai, and S. Ramakrishna, Tissue Eng., 11, 101 (2005).
M. Nasir, H. Matsumoto, T. Danno, M. Minagawa, T. Irisawa, M. Shioya, and A. Tanioka, J. Polym. Sci., Part B: Polym. Phys., 44, 779 (2006).
L. Zhang and Y.-L. Hsieh, Nanotechnology, 17, 4414 (2006).
Y. Z. Zhang, Y. Feng, Z.-M. Huang, S. Ramakrishna, and C. T. Lim, Nanotechnology, 17, 901 (2006).
S. Megelski, J. S. Stephens, D. B. Chase, and J. F. Rabolt, Macromolecules, 35, 8456 (2002).
J. T. McCann, M. Marquez, and Y. Xia, J. Am. Chem. Soc., 128, 1436 (2006).
H. Kawai, Jpn. J. Appl. Phys., 8, 975 (1969).
B. Mohammadi, A. A. Yousefi, and S. M. Bellah, Polym. Test., 26, 42 (2007).
Y. Ye, Y. Jiang, Z. Wu, and H. Zeng, Integrated Ferroelectrics, 80, 245 (2006).
M. Nasir, H. Matsumoto, M. Minagawa, A. Tanioka, T. Danno, and H. Horibe, Polym. J., 39, 670 (2007).
M. Khayet, C. Y. Feng, K. C. Khulbeb, and T. Matsuura, Polymer, 43, 3879 (2002).
K. Ishizaki, S. Komarneni, and M. Nanko, in “Porous Material: Process Technology and applications,” Kluwer Academic Publisher, London, 1998, pp 204–214.
W. Sae-lim, W. Tanthapanichakoon, and C. Kanaoka, J. Aerosol Sci., 37, 228 (2006).
G. C. Alfonso, A. Turturro, M. Pizzoli, M. Scandola, and G. Ceccorulli, J. Polym. Sci., Part B: Polym. Phys., 27, 1195 (1989).
T. Hanada and Y. Ando, in “the series of the natural science and engineering,” The Bulletin of Tokyo Kasei Gakuin University, 41, 2001, p 77.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nasir, M., Matsumoto, H., Minagawa, M. et al. Preparation of Porous PVDF Nanofiber from PVDF/PVP Blend by Electrospray Deposition. Polym J 39, 1060–1064 (2007). https://doi.org/10.1295/polymj.PJ2007037
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1295/polymj.PJ2007037
Keywords
This article is cited by
-
Tree-like cellulose nanofiber membranes modified by citric acid for heavy metal ion (Cu2+) removal
Cellulose (2019)
-
Scalable non-solvent-induced phase separation fabrication of poly(vinylidene fluoride) porous fiber with intrinsic flame-retardation and hydrophobic properties
Iranian Polymer Journal (2018)
-
Effect of solvents on the crystal formation of poly(vinylidene fluoride) film prepared by a spin-coating process
Polymer Journal (2017)
-
Development of Ultraviolet (UV) Radiation Protective Fabric Using Combined Electrospinning and Electrospraying Technique
Journal of The Institution of Engineers (India): Series E (2017)
-
Preparation of porous PVDF nanofiber coated with Ag NPs for photocatalysis application
Fibers and Polymers (2016)