Abstract
The discovery of the phenomenon of extraordinary optical transmission through a two-dimensional array of subwavelength holes in a metallic film1 has opened a new line of research within optics. The key role played by surface plasmons in transferring light efficiently from the input side of the metal film to the output region was soon realized. This fundamental knowledge enabled extension of this surface-plasmon ability to achieve extraordinary optical transmission and strong collimation of light in a single hole surrounded by a finite periodic array of indentations2. Here, we show how these ideas developed for electromagnetic radiation can be transferred to other classical waves such as acoustic waves.
Similar content being viewed by others
Main
In analogy with the electromagnetic case, the main actors necessary for the appearance of both enhanced transmission and collimation in acoustics are the acoustic surface waves (ASWs). There are many different types of ASW (see, for example ref. 3), depending on the nature of the two media forming the interface (solid–solid, solid–fluid, fluid–fluid and so on). ASWs have been thoroughly studied in the past owing to both their fundamental interest and technological applications. In particular, ASWs such as Rayleigh-type waves appearing at the interface between a solid material and a fluid are now widely used in the so-called SAW devices. Here, we focus on ASWs appearing at a fluid–fluid interface, although our findings could easily be translated to other elastic surface waves. The condition for the existence of an ASW propagating at the interface between two semi-infinite fluids is very similar to the equation governing the presence of a surface electromagnetic mode running at the interface between two dielectric media:
where kzI and kzII are the inverse of the decay lengths of the ASW in media I and II, respectively, and ρI and ρII are the corresponding mass densities. Note that the mass density plays the same role as the dielectric constant in the electromagnetic case. It is clear that if the two media have positive mass densities, there is no ASW running at the I–II interface. One possibility for generating ASWs is to place a fluid layer of uniform thickness on top of a semi-infinite fluid. Here, we consider a similar alternative, in which ASWs are created by periodically corrugating the interface between a rigid body and a fluid. The simplest way of doing this is by perforating a one-dimensional (1D) array of grooves, as seen in Fig. 1a. The fluid in region II of thickness h can be characterized effectively by a mass density that is different to the one associated with the fluid in semi-infinite medium I. In other words, we could say that medium II is an acoustic metamaterial4. To the best of our knowledge, the idea of corrugating an interface to create a fluid–fluid ASW was first proposed5 and verified experimentally6 by Kelders and co-workers in connection with ultrasonic surface waves in porous media. Similar ideas for ASWs in solid media were previously suggested by Gulyaev7.
In the case of a corrugated perfect rigid body, the dispersion relation (relation between frequency, ω, and momentum, k) of these geometry-induced ASWs is controlled by the geometrical parameters of the array of grooves and the density of the fluid. When the width of the grooves, a, is much smaller than the period of the array, d, a good approximation for k(ω) is given by:
where k0=ω/cS, with cS being the velocity of sound in medium I. The periodic corrugation creates an ASW but, at the same time, can provide the necessary parallel momentum to allow the coupling of an incident acoustic plane wave with the ASW and vice versa.
Resonant transmission of sound in periodic acoustic structures aided by the excitation of localized modes has been analysed before8,9. Here, we use the properties of the geometry-induced ASWs to enhance the transmission through a single subwavelength aperture and to collimate sound waves. As shown below, these two phenomena can be achieved by placing finite arrays of indentations around the aperture (see Fig. 1b). To calculate the transmission properties of this structure, we have applied a numerical method on the basis of a modal expansion of the pressure field. By applying the matching conditions (continuity of the pressure only at the openings and continuity of the velocity everywhere), it is possible to extract the pressure and velocity fields in all space. Figure 2 shows the calculated normalized-to-area transmittance versus wavelength for an incident acoustic plane wave through a 1D slit flanked by periodic arrays of 10 grooves to both its left and right. A resonant peak appearing at a wavelength close to the period of the array clearly dominates the spectrum. For sound of that particular wavelength, the transmitted intensity is 70 times larger than the one impinging directly at the slit opening. This means that a significant portion (30%) of the intensity incident on the finite array of grooves is collected by the ASW and funnelled through the central slit.
Accompanying the resonant transmission, the sound wave at resonance emerges from the structure exciting an ASW (the fingerprints of this running surface wave are clearly seen in Fig. 3b). This ASW is then scattered by the grooves and the interference between these scattered waves and the sound wave that was just diffracted by the slit results in the emergence of the strongly collimated beam in the far-field region (see Fig. 3a). Note that in contrast to previous studies achieving lateral compression or collimation of ASWs, we use surface waves to collimate an acoustic plane wave that impinges perpendicular to the structure.
The fact that both enhanced transmission and collimation phenomena occur also in acoustics opens up many exciting possibilities in the design of new acoustic devices. We foresee that our finding will lead to applications for mechanical filtering, in non-destructive testing of materials10 and in medical ultrasound instrumentation11.
References
Ebbesen, T. W., Lezec, H. J., Ghaemi, H. F., Thio, T. & Wolff, P. A. Extraordinary optical transmission through subwavelength hole arrays. Nature 391, 667–669 (1998).
Lezec, H. J. et al. Beaming light from a subwavelength aperture. Science 297, 820–822 (2002).
Hess, P. Surface acoustic waves in materials science. Phys. Today 42–47 (March 2002).
Fang, N. et al. Ultrasonic metamaterials with negative modulus. Nature Mater. 5, 452–456 (2006).
Kelders, L., Allard, J. F. & Lauriks, W. Ultrasonic surface waves above rectangular-groove gratings. J. Acoust. Soc. Am. 103, 2730–2733 (1998).
Kelders, L., Lauriks, W. & Allard, J. F. Surface waves above thin porous layers saturated by air at ultrasonic frequencies. J. Acoust. Soc. Am. 104, 882–889 (1998).
Gulyaev, Y. V. & Plesskii, V. P. Slow acoustic surface waves in solids. Sov. Tech. Phys. Lett. 3, 87–88 (1977).
Zhang, X. Acoustic resonant transmission through acoustic gratings with very narrow slits: multiple-scattering numerical simulations. Phys. Rev. B 71, 241102(R) (2005).
Sainidou, R. & Stefanou, N. Guided and quasiguided elastic waves in phononic crystal slabs. Phys. Rev. B 73, 184301 (2006).
Fink, M. Ultrasound puts materials to the test. Phys. World 41–45 (February 1998).
Kennedy, J. E., Ter Haar, G. R. & Cranston, D. High intensity focused ultrasound: Surgery of the future? Br. J. Radiol. 76, 590–599 (2003).
Acknowledgements
J.C. acknowledges the encouragement of H. Kamath. Financial support from the Spanish MEC under contract MAT2005-06608-C02 is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Christensen, J., Fernandez-Dominguez, A., de Leon-Perez, F. et al. Collimation of sound assisted by acoustic surface waves. Nature Phys 3, 851–852 (2007). https://doi.org/10.1038/nphys774
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nphys774
This article is cited by
-
Remote whispering metamaterial for non-radiative transceiving of ultra-weak sound
Nature Communications (2021)
-
Emitting long-distance spiral airborne sound using low-profile planar acoustic antenna
Nature Communications (2021)
-
Tunable characteristics of low-frequency bandgaps in two-dimensional multivibrator phononic crystal plates under prestrain
Scientific Reports (2021)
-
Slow acoustic surface modes through the use of hidden geometry
Scientific Reports (2021)
-
A Novel Application of Multi-Resonant Dissipative Elastic Metahousing for Bearings
Acta Mechanica Solida Sinica (2021)