Letters to Nature

Nature 434, 743-746 (7 April 2005) | doi:10.1038/nature03457; Received 20 September 2004; Accepted 25 January 2005

Tuning clathrate hydrates for hydrogen storage

Huen Lee1, Jong-won Lee1, Do Youn Kim1, Jeasung Park1, Yu-Taek Seo2,3, Huang Zeng2, Igor L. Moudrakovski2, Christopher I. Ratcliffe2 & John A. Ripmeester2

  1. Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701, Republic of Korea
  2. Steacie Institute for Molecular Sciences, National Research Council Canada, Ottawa, Ontario, Canada K1A 0R6
  3. Present address: Conversion Process Research Center, Korea Institute of Energy Research, PO Box 103, Jang-dong, Yuseong-gu, Daejeon 305-343, Republic of Korea

Correspondence to: Huen Lee1John A. Ripmeester2 Correspondence and requests for materials should be addressed to H.L. (Email: h_lee@kaist.ac.kr) or J.A.R. (Email: John.Ripmeester@nrc-cnrc.gc.ca).

The storage of large quantities of hydrogen at safe pressures1 is a key factor in establishing a hydrogen-based economy. Previous strategies—where hydrogen has been bound chemically2, adsorbed in materials with permanent void space3 or stored in hybrid materials that combine these elements3—have problems arising from either technical considerations or materials cost2, 3, 4, 5. A recently reported6, 7, 8 clathrate hydrate of hydrogen exhibiting two different-sized cages does seem to meet the necessary storage requirements; however, the extreme pressures (approx 2 kbar) required to produce the material make it impractical. The synthesis pressure can be decreased by filling the larger cavity with tetrahydrofuran (THF) to stabilize the material9, but the potential storage capacity of the material is compromised with this approach. Here we report that hydrogen storage capacities in THF-containing binary-clathrate hydrates can be increased to approx4 wt% at modest pressures by tuning their composition to allow the hydrogen guests to enter both the larger and the smaller cages, while retaining low-pressure stability. The tuning mechanism is quite general and convenient, using water-soluble hydrate promoters and various small gaseous guests.


These links to content published by NPG are automatically generated.


Solid-state-chemistry Framework for a molecular prison

Nature News and Views (24 Aug 2006)

Chemistry: Round Peg in Round Hole

Nature News and Views (24 Aug 1973)


A new clathrate hydrate structure

Nature Letters to Editor (08 Jan 1987)

The mechanisms for pressure-induced amorphization of ice I h

Nature Letters to Editor (12 Aug 1999)

See all 35 matches for Research