Abstract
The recent interest in atom-optics has mainly been directed at the manipulation of atomic beams by static fields or lasers1,2,3. Using an alternative approach we have succeeded in focusing in two dimensions a neutral atomic helium beam at room temperature with a reflective optical element (an atom mirror). Such focusing relies on specular elastic scattering, which leaves the coherence of incoming wavepackets unchanged.
Main
We created the atom mirror from a single 50-μm-thick silicon crystal cut along the (111) crystal plane. The surface was hydrogen-passivated ex-situ4 making it inert (the reflectivity remained constant over several months at 10-6 mbar). The crystal was deformed electrostatically in an arrangement similar to a parallel plate capacitor to give a parabolic profile for focusing. The focal length can be varied in situ simply by adjusting the electric field.
We produced a helium beam in a supersonic expansion source5 at room temperature (corresponding to a wavelength of 0.52 Å). We placed the mirror 0.7 m from the source and 0.8 m from the detector with the beam incident at 45°. We measured beam cross-sections for different mirror curvatures (Fig. 1) by scanning the beam across a 100 μm pinhole in front of the detector. Focusing in the geometry used here is necessarily astigmatic. The intermediate disk of least confusion (Fig. 1c) has a spot diameter of 210±50 μm. The solid angle of the unfocused beam is reduced by a factor of about 100. There is a corresponding increase in intensity. The spot size is not limited by aberrations of the mirror, but solely by the geometry of the system and the size of the object (confirmed by computer simulations to be the surface of last scattering in the supersonic expansion5).
The ultimate performance of the mirror is limited by the geometrical abberations6 and diffraction7 due to the finite size of the mirror (elastic scattering gives no chromatic aberrations). The only other atom-focusing method that relies solely on the de Broglie wavelength of the atoms is a Fresnel zone plate8. A zone plate is diffraction-limited because of the necessary constraints on the plate diameter (about 0.2 mm with current technology). A mirror, on the other hand, has no such inherent limit on its size. With normal incidence, a point source, and image planes 1 m and 0.1 m from the focusing element, the best spot size would be about 2.5 nm with the beam spanning about 2 mm on the mirror surface.
It follows that a helium microscope with nanometre resolution is possible. A helium atom microscope would be a unique non-destructive tool for reflection or transmission microscopy. It could be used to investigate fragile and insulating materials such as polymers and certain biological samples. Focusing mirrors also have the potential to increase spatial resolution and intensity in conventional helium-surface scattering instruments.
References
Kaenders, W. G., Lison, F., Richter, A., Wynands, R. & Meschede, D. Nature 375, 214–216 (1995).
Roach, T. M. et al. Phys. Rev. Lett. 75, 629–632 (1995).
Berkhout, J. J., Luiten, O. J., Setija, I. D., Hijmans, T. W. & Mizusaki, T. Phys. Rev. Lett. 63, 1689–1692 (1989).
Higashi, G. S., Becker, R. S., Chabal, Y. J. & Becker, A. J. Appl. Phys. Lett. 58, 1656–1658 (1991).
Beijerinck, H. C. W. & Verster, N. F. Physica C 111, 327–352 (1981).
Korsch, D. Reflective Optics 85-93 (Academic, London, 1991).
Longhurst, R. S. Geometrical and Physical Optics 221-225 (Longmans, London, 1967).
Carnal, O., Sigel, M., Sleator, T., Takuma, H. & Mlynek, Phys. Rev. Lett. 67, 3231–3234 (1991).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Holst, B., Allison, W. An atom-focusing mirror. Nature 390, 244 (1997). https://doi.org/10.1038/36769
Issue Date:
DOI: https://doi.org/10.1038/36769
This article is cited by
-
Ultrasmooth mirror could herald birth of a new microscope
Nature (2008)
-
One-dimensional focusing of an atomic beam by a flat reflector
Applied Physics B (2003)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.