Bacterial chemoreceptors organize into large clusters at the cell poles. Despite a wealth of structural and biochemical information on the system’s components, it is not clear how chemoreceptor clusters are reliably targeted to the cell pole. Here, we quantify the curvature-dependent localization of chemoreceptors in live cells by artificially deforming growing cells of Escherichia coli in curved agar microchambers, and find that chemoreceptor cluster localization is highly sensitive to membrane curvature. Through analysis of multiple mutants, we conclude that curvature sensitivity is intrinsic to chemoreceptor trimers-of-dimers, and results from conformational entropy within the trimer-of-dimers geometry. We use the principles of the conformational entropy model to engineer curvature sensitivity into a series of multi-component synthetic protein complexes. When expressed in E. coli, the synthetic complexes form large polar clusters, and a complex with inverted geometry avoids the cell poles. This demonstrates the successful rational design of both polar and anti-polar clustering, and provides a synthetic platform on which to build new systems.
A close examination of Escherichia coli reveals a highly spatially ordered environment, from a chromosome divided into hundreds of topologically isolated domains1, to landmark proteins that oscillate from cell pole to cell pole to identify the cell’s middle for division2. The components of other vital protein complexes, such as the phosphotransferase system3 and the chemotaxis system4, reside at the cell poles. Determining the molecular mechanisms that drive such spatial organization is crucial not only to understand bacterial physiology but also to engineering cells with novel functionalities5.
The chemotaxis system is highly conserved and ubiquitous in bacteria, being found in a little over 50% of sequenced bacterial genomes6. The heart of the chemotaxis system is a large array of transmembrane chemoreceptors interconnected at their cytoplasmic distal tips by the histidine kinase CheA and a small adaptor protein CheW4. Chemoreceptors were first identified as a cluster at the cell pole in E. coli more than 20 years ago7,8, and though chemoreceptor clusters have been found at the pole in all bacterial species studied thus far9, little is known about how this crucial system is targeted there. Some bacteria contain a cryptic parA gene in the chemotaxis operon, which in the case of Vibrio cholerae10 and cytoplasmic chemoreceptors in Rhodobacter sphaeroides11 is necessary for polar targeting, but most bacteria including E. coli do not have such a parA. Previous research with E. coli has suggested that stochastic chemoreceptor cluster nucleation and growth could propagate an existing polar localization pattern to daughter cells, either directly12, or in conjunction with unspecified cytoskeletal elements13,14. Other researchers have found that polar cluster localization in E. coli requires an intact Tol/Pal system15.
One simple mechanism that could drive chemoreceptor clusters to the cell poles is the higher mean curvature of the membrane at the cell pole compared with the rest of the cell. Although chemoreceptors do not have any obvious structural similarity to well-known membrane curvature sensing and generating domains16, electron microscopy has shown that overexpressed E. coli serine chemoreceptor, Tsr, forms tubular membrane invaginations and apparent vesicular structures17. Subsequent cryo-electron tomography18,19 and cross-linking20 have found that chemoreceptors form a cone-shaped trimer-of-dimers (ToD) in vivo, corroborating a previous crystal structure of the cytoplasmic domain of Tsr21. This ToD geometry led Endres22 to propose a curvature-based mechanism for polar localization of the array. Recent work in Bacillus subtilis supported this notion, concluding that TlpA, which is homologous to E. coli chemoreceptors, is sorted by membrane curvature23.
Here we directly quantify the curvature-dependent localization of E. coli chemoreceptors in vivo by artificially deforming growing cells in curved agar microchambers, as inspired by Takeuchi et al.24. We find that E. coli chemoreceptor clusters are highly enriched in curved membranes, and that the magnitude of this curvature sensitivity can fully explain their polar localization. The scaling of the enrichment as a function both of cluster size and membrane curvature matches predictions from a recent model for chemoreceptor clustering25. We propose that chemoreceptor ToDs adopt a curved cone shape to maximize conformational entropy, presenting a novel mechanism for curvature sensitivity. We use this framework to design a series of synthetic curvature-sensitive protein complexes that sort into regions of either positive or negative curvature in living E. coli, closely mimicking the localization pattern of natural chemoreceptor clusters.
Artificially curved cells
To test the possibility that E. coli chemoreceptor clusters localize to cell poles in response to membrane curvature, we artificially deformed growing filamentous E. coli in agar microchambers (Supplementary Fig. 1) using a technique developed by Takeuchi et al.24. Cells deformed into a variety of irregularly curved shapes as they elongated into long filaments and contacted the edges of the agar chambers (Fig. 1a), providing a range of local curvatures along the cell’s length. We fluorescently labelled chemoreceptor clusters using a fusion of eYFP to the methyltransferase CheR, which binds to the C terminus of both high-abundance E. coli chemoreceptors (Tsr and Tar) and is not thought to impair clustering when fused to eYFP13 (Fig. 1b).
Cell outlines were segmented from brightfield images using a sub-pixel contour-tracing algorithm (Fig. 1c). We fit a third-order polynomial to a sliding window along the cell outline to measure the first and second derivatives of position with respect to distance, from which we could directly calculate local curvature (Fig. 1d, Supplementary Fig. 2). We define positive curvature as cell-pole-like curvature, for example, the inside face of a convex shape. Cell poles were identified in each outline as the two regions with the highest positive curvature and were ignored for all further analyses. Profiles of lateral cell curvature clearly reflected the curvature imposed by the agar chambers (Fig. 1c,d), typically on the order of ±0.5 μm−1. We observed an additional irregular variation on the order of ±0.25 μm−1 occurring approximately every ∼1 μm, in close accordance with other published work26. These two sources of variation together gave a broad distribution of measured lateral cell curvatures, with 95% of measured curvatures between −0.73 and 0.70 μm−1 (Fig. 2b).
Individual chemoreceptor clusters were segmented from fluorescence images and localized using a two-dimensional Gaussian fit (Fig. 1c). Each cluster within 0.3 μm of the cell outline was assigned the curvature from the closest point along the cell outline, and as a measure of relative cluster size, each cluster was also assigned the integrated, background-subtracted fluorescence intensity (Fig. 1c,d). The resultant distribution of cluster intensities was roughly exponential, in close accordance with previously measured cluster size distributions12 (Fig. 2a).
Chemoreceptor distributions in curved cells
We plotted a histogram of cluster frequency as a function of lateral membrane curvature, weighted to correct for non-uniform sampling of cell curvature, and normalized to one at zero curvature. We found a large enrichment of clusters with increasing lateral membrane curvature, appearing approximately exponential (Fig. 2c), demonstrating that chemoreceptor localization is sensitive to membrane curvature. We separated clusters into low-, medium- and high-intensity groups as a proxy for cluster size (Fig. 2a), and for each group, we measured the curvature enrichment. Larger clusters were markedly more enriched in high curvature regions than small clusters (Fig. 2c).
To examine the effect of cluster size more systematically, we binned the raw cluster data into 100 sequential, overlapping intensity bins, and fit a simple exponential to each bin’s curvature enrichment profile, where F is the cluster frequency, C is the curvature and the sole fit parameter E is the enrichment magnitude. Enrichment magnitude E describes the relative frequency of a cluster per unit curvature compared to un-curved lateral cell. We found that E scales roughly linearly as a function of cluster size (Fig. 2d), allowing us to extrapolate the enrichment magnitude for a large polar cluster (Epolar=6.7 μm, Fig. 2d inset). Using Epolar and a nominal polar curvature of 2.5 μm−1, we estimate that an average polar cluster will be =0.5 × 108 more likely to be at the cell pole than in the lateral membrane, more than enough enrichment to fully explain why large receptor clusters are always at the cell pole.
Next, we wanted to determine whether curvature enrichment depends on any external factors, or is an intrinsic property of chemoreceptors. Other researchers have suggested that localization depends on unspecified cytoskeletal components13,14. To test this possibility, we measured the curvature enrichment profile of receptor clusters in an RP437 mutant with a complete knockout of the Min system (RP437 ΔminCDE) (Fig. 3a, Supplementary Fig. 4). The Min system helps direct division site placement by oscillating from cell pole to cell pole27. We also tested whether the anionic lipid cardiolipin, which is found in micro-domains at the cell pole and is enriched in regions of positive curvature28, has a role in targeting chemoreceptors to the pole by measuring the curvature enrichment profile of chemoreceptor clusters in an RP437 mutant knocked out for all three cardiolipin synthases—ClsA, ClsB and ClsC (RP437 ΔclsABC). In both cases, we found that curvature enrichment was indistinguishable from receptor curvature enrichment in wild-type cells (Fig. 3a, Supplementary Fig. 4).
We also measured curvature enrichment profile of receptor clusters in RP437 mutants knocked out for CheA and CheW (RP437 ΔcheAW), which along with chemoreceptors form the structural core of chemoreceptor clusters. Previous imaging in ΔcheAW strains has found chemoreceptors as diffuse polar caps8 that are undetectable in cryo-electron tomography18. However, we found chemoreceptor clusters as distinct foci along the lateral cell, in addition to the previously described polar caps (Fig. 3b, Supplementary Fig. 4). Though clusters in ΔcheAW cells were on average much smaller than native clusters (Fig. 3b inset), we found that the curvature enrichment profile was indistinguishable from wild-type chemoreceptor clusters when controlling for cluster size (Fig. 3b).
Finally, we tested whether defects in the Tol/Pal system affect curvature enrichment, as recent research has found that an intact Tol/Pal system is required for chemoreceptors to localize to the poles15. RP437 mutants knocked out for either Tol or Pal (RP437 Δtol, RP437 Δpal) showed phenotypic defects when grown in suspension, in accordance with the Tol/Pal system’s vital role in cell physiology, and quickly lysed when we attempted to grow them as filaments in our agar chambers. However, we were able to grow artificially deformed RP437 mutants knocked out for Lpp (RP437 Δlpp) (Supplementary Fig. 4), a peripheral component of the Tol/Pal system that has also been reported to affect polar targeting. We found that chemoreceptors are curvature sensitive in Δlpp cells, but much like in ΔcheAW cells, the average cluster size is smaller (Fig. 3b). When controlling for size, the receptor curvature enrichment profile in Δlpp cells was indistinguishable from the enrichment profile in wild-type RP437 cells (Fig. 3b). Chemoreceptor clusters in non-filamentous, suspension-grown Δtol cells were on average smaller than clusters in Δlpp cells, and markedly smaller than clusters in wild-type RP437 cells (Fig. 3c). Thus, given the strong effect of cluster size on enrichment magnitude, these results suggest that defects in the Tol/Pal system affect polar clustering primarily by reducing average cluster size, but does not affect cluster curvature sensitivity.
Receptor intrinsic curvature
These observations indicate that curvature sensitivity is an intrinsic property of chemoreceptors, and does not depend on any external factor. Previous work by Endres22 and Haselwandter and Wingreen25 have suggested that the curved cone shape of a receptor ToD is sufficient to explain curvature sorting of clusters. In both models, the cone shape induces an elastic deformation in the lipid bilayer, incurring an energy penalty that scales roughly linearly with the mean curvature of the surrounding membrane (Fig. 4a). The difference in deformation energies ΔE between a ToD in a curved versus a flat membrane dictates the probability F of finding a ToD in the curved membrane according to the Boltzmann distribution , where T is the temperature and k is the Boltzmann constant. Additionally, in both models, coupling between ToDs leads the energy difference to scale roughly linearly with the size of a cluster. Thus, energy ΔE should scale approximately linearly with both cluster size and membrane curvature, with the resulting cluster frequency F in turn varying exponentially. Both these predictions are in good agreement with our measurements.
Next, we sought to investigate the source of the curved ToD conformation. Most chemoreceptors have a large, periplasmic ligand-binding domain, which could conceivably force the trimer of dimers structure open into a cone shape, with the trimerization domain acting as a hinge (Fig. 4a). However, the curvature enrichment profile of Tar° clusters, a signalling-competent mutant of E. coli Tar that lacks the periplasmic domain29, expressed alone in otherwise receptorless UU2611 cells was indistinguishable from the receptor enrichment profile of wild-type receptor clusters (Fig. 4b, Supplementary Fig. 4). This suggests that the periplasmic domain has no role in the cone-like ToD shape.
It is also possible that protein–protein contacts in the trimerization domain hold the cone shape open, effectively cantilevering the transmembrane domains apart. Recent work in B. subtilis with the chemoreceptor TlpA, which also forms ToDs, suggested that curvature sensitivity arises from rigidity within the ToD cone shape holding the transmembrane domains apart and at an angle in the membrane23. The researchers reported that curvature sensitivity was eliminated by the introduction of two glycine residues within the receptor HAMP domain, increasing receptor flexibility. To test this in E. coli, we made homologous glycine mutations in the HAMP domain of Tsr, making Tsr-flexiHAMP, and expressed it in otherwise receptorless UU2611. Although clustering was severely impaired, appearing nearly homogenous throughout the membrane, there were frequent small clusters (Fig. 4b, Supplementary Fig. 4). These small Tsr-flexiHAMP clusters showed similar curvature sensitivity to wild-type chemoreceptors, when controlling for cluster size (Fig. 4b). Thus, just like cells with an impaired Tol/Pal system, the Tsr-flexiHAMP mutant affects polar localization by reducing average chemoreceptor cluster size, but has no effect on chemoreceptor curvature sensitivity.
A final possibility is that the transmembrane domains of a ToD spread apart to maximize conformational entropy, while the cytoplasmic-distal ends are held tightly in together by protein–protein contacts along the trimerization domain (Fig. 4c). On the length scale of a chemoreceptor, protein is relatively flexible30. Using measurements from α-helical coiled-coils31, a conservative estimate for 4-helix bundle persistence length is P=500 nm. A single receptor dimer with a length of L=20 nm should experience an average deflection along its length of =4.0 nm due to thermal motion within the four-helix bundle alone (Fig. 4d), more than enough to account for the cone shape we estimate from structural data where the average deflection is 1.4 nm from perpendicular. Additional flexibility could come from a ring of conserved glycine residues within four-helix bundle32. Thus, ToD entropy is maximized in an intrinsically curved cone configuration because there are many possible conformations where the transmembrane domains are splayed apart due to flex in the four-helix bundles, but only one where the transmembrane domains all pass perpendicularly through the membrane.
Synthetic clusters using scaffolds
Next, we attempted to re-engineer the splayed, conical ToD shape into a synthetic protein complex to test whether our conformational entropy model can explain the origins of curvature sensitivity. We used long, transmembrane rod proteins to mimic chemoreceptors, and a separate, multivalent scaffold protein that binds to the cytoplasmic distal tip of the rod proteins to form a large oligomer. With the cytoplasmic tips held together, the transmembrane domains should spread apart and tilt to maximize conformational entropy, generating small deformations in the membrane that are minimized in membranes with inward curving, positive curvature (Fig. 5a).
We built a scaffold protein using eight direct repeats of the Src homology 3 (SH3) domain from mouse CRK, which binds to a short, engineered SH3 recognition sequence with high affinity (Kd=0.1 μM)33. Each SH3 repeat was separated by a flexible five-amino acid glycine–serine linker, making 8xSH3 (Fig. 5a, Supplementary Fig. 5). As a rod protein, we designed a mutant of the chemoreceptor Tsr with the entire trimerization/signalling domain deleted, as identified by a bioinformatic comparison of all known chemoreceptor sequences34, encompassing 25 amino acids on either side of the central tip residue E391. The trimerization/signalling domain was replaced with the 11-amino acid SH3 recognition sequence, flanked by two flexible 5-amino acid linkers, making TsrΔT-SH3 (Fig. 5a, Supplementary Fig. 5). The two components were expressed in receptorless UU2611 cells to eliminate any interference from native chemoreceptor clusters. When expressed alone, TsrΔT-SH3 labelled with YFP-CheR appeared diffuse throughout the membrane, with no apparent clustering or aggregation, suggesting that the protein can freely diffuse within the membrane and is properly folded. Similarly, a direct fusion of mCherry to 8xSH3 expressed alone appeared diffuse throughout the cytoplasm (Fig. 5a).
When both rod and scaffold proteins were expressed together, our synthetic complex formed efficiently, with the components co-localized as punctate spots (Fig. 5a). The complexes were predominantly at the cell pole, with smaller clusters along the lateral membrane in a manner indistinguishable from wild-type chemoreceptor clusters. The curvature enrichment profile of the artificial complex showed a strong preference for positive curvature, similar to the curvature enrichment of native chemoreceptor clusters (Fig. 5c,d). Both clustering and polar localization were robust to variation in component expression level. Whole-cell cryo-electron tomograms showed no evidence of protein aggregation or membrane distortion, even with both components grossly overexpressed, and also showed no evidence of an ordered transmembrane array like would be observed for a native chemoreceptor cluster (Supplementary Fig. 3).
We hypothesized that we could invert the curvature sensitivity of synthetic clusters to prefer negative curvature by connecting the rod proteins together by their periplasmic domains, analogous to inverting the orientation of the trimer of dimers in the membrane so the cone vertex is in the periplasm (Fig. 5b). To test this, we designed a Tsr mutant, TsrΔT-pSH3, with the cytoplasmic trimerization domain replaced by a flexible 5-amino acid linker, and the 11-amino acid SH3 recognition sequence inserted into an exposed loop of the periplasmic domain, again flanked by two flexible 5-amino acid linkers (Supplementary Fig. 5). We targeted the scaffold protein to the periplasm using the twin arginine transporter (TAT) signal sequence from E. coli TorA (ref. 35) (Supplementary Fig. 5).
Periplasmically scaffolded complexes readily formed when the components were co-expressed in cells, appearing as punctate spots on the cell membrane (Fig. 5b). As before, when either component was expressed in isolation, we saw no clustering. The periplasmic complexes appeared randomly distributed across the cell membrane, with the largest clusters almost never at the cell pole (Fig. 5b,e). In accordance with our conformational entropy model, the curvature enrichment profile of the periplasmic complex revealed a modest preference for negative curvature, opposite to the curvature of the cell pole (Fig. 5d,e). Thus, by merely changing the connectivity of the complex, we were able to markedly alter localization, suggesting that the complex’s shape is likely the sole factor responsible for curvature sensitivity.
We expect that the periplasmic complex is less curvature sensitive than the cytoplasmic complex is because in the periplasmic complex, the SH3-recognition sequence is several-fold closer to the cell membrane. The entropic spreading model predicts that the SH3-recognition sequence is effectively a hinge point in the diverging ToD like conformation, with the divergence driven by flexibility along the rod protein’s length. Thus, when the hinge point is closer to the membrane, there is less deflection at the membrane, and less curvature enrichment. A second key difference is that the periplasmic complex induces a curvature sign mismatch. The periplasmic complex has negative curvature with respect to a membrane that is positively curved, whereas the cytoplasmic complex has positive curvature with respect to a less positively curved membrane. The energetics of such a sign mismatch are likely much more complicated than the energetics of the cytoplasmic complex, in ways that current models do not attempt to address.
Totally synthetic clusters
To control for any contribution from TsrΔT-SH3 to our artificial complex’s curvature sensitivity unrelated to its structural role as a rod, we designed an entirely heterologous membrane anchored rod. As a membrane tether, we used a 22-amino acid single-pass transmembrane helix from an arbitrary Synechocystis gene, which we fused via a 7-amino acid glycine–serine linker to the N terminus of YFP. We built an extended rod domain by fusing spectrin repeat domains from human dystrophin, which form long structural filaments, to the C terminus of YFP. We used dystrophin spectrin repeats 20 and 21, together extending ∼10 nm, as they have been previously shown in vitro to have no propensity to self-aggregate or oligomerize, and no affinity for membranes36,37. Finally, we added an SH3 binding sequence to the C terminus of the spectrin repeat domains, to make D2021-SH3 (Fig. 6a, Supplementary Fig. 5).
The heterologous rod distributed evenly across the membrane (Fig. 6a) when expressed alone in E. coli DH5α, identically to our previous rod, TsrΔT-SH3. When co-expressed with our cytoplasmic scaffold 8xSH3, the heterologous rod efficiently formed clusters, which were predominantly localized to the poles (Fig. 6a,b). The curvature enrichment profile of the entirely heterologous complex was nearly identical to the profile of our receptor-based artificial complex, with a strong preference for positive curvature (Fig. 6c).
In summary, we have found that E. coli chemoreceptor localization is highly sensitive to membrane curvature. The sensitivity we measured is strong enough to fully explain the localization of large receptor clusters at the cell poles, and appears to be an intrinsic property of chemoreceptors. Finally, we refactored the structure and connectivity of a chemoreceptor cluster using entirely heterologous components to make a synthetic, curvature-sensitive protein complex.
We propose that chemoreceptor curvature sensitivity is a result of conformational entropy within chemoreceptor trimer of dimers spreading the transmembrane regions apart, leading to the cone shape seen in structural studies. We used the entropic spreading framework to impart curvature sensitivity onto a series of synthetic protein complexes built from uncurved components. The complexes consisted of long, transmembrane rods connected together by either their cytoplasmic or periplasmic domains, leading to complexes that prefer positive or negative membrane curvature, respectively.
With chemoreceptor clusters and more generally our entropic spreading model, we have demonstrated a unique mechanism for membrane curvature sensing. Artificial confinement of proteins bound to the outside of large vesicles within small lipid domains was recently shown to induce extensive membrane tubulation38. This curvature-generating effect was modelled as an imbalance in lateral steric pressure across the two bilayer leaflets, caused by a high density of bulky protein on one side of the membrane, but no protein on the other side. Recent work has found that mammalian Epsin1 and AP180, both involved in clathrin-based vesiculation, induce membrane curvature using such a steric mechanism39. Our synthetic complexes and by extension trimers-of-dimers employ a similar principle, except our synthetic complexes experience an imbalanced compressive force, driven by binding to the SH3 scaffold protein. This attraction-driven compressive force, in contrast to a repulsive steric force, reverses the direction of the induced curvature, instead bringing the membrane toward the protein. Such a compressive mechanism has been predicted in the context of self-attractive membrane adsorbed polymers40 and protein clusters41, and has been theorized to play a role in the sorting of some GPI-anchored proteins and regulated secretory proteins (RSPs) in the highly curved trans-Golgi network41.
Strains and plasmids
Except where noted, all cell strains were derivatives of the E. coli K-12 strain RP437, including receptorless strain UU2611 (tsr tar tap trg aer cheR). Both strains were a gift from Sandy Parkinson (University of Utah, Salt Lake City). Knockout strain RP437 ΔclsABC was made by sequential P1 transductions from Keio clones42 JW1241-5 (ΔclsA), JW0772-1 (ΔclsB) and JW5150-1 (ΔclsC) (Yale Stock Center). Keio clones are kanamycin-marked knockouts of complete open reading frames (ORFs) in K-12-derived E. coli. Knockouts for Tol and Lpp were made by P1 transduction from Keio clones JW0729-3 (Δtol) and JW1667-5 (Δlpp) (Yale Stock Center). Knockout strains RP437 ΔminCDE and RP437 ΔcheAW were made by P1 transduction from donor strains made directly through lambda red recombination, according to Datsenko and Wanner43. In both cases, all ORFs were removed in their entirety, from the beginning of minC to the end of minE (which includes minD), and from the beginning of cheA to the end of cheW. Unless otherwise noted, cells were propagated in standard LB medium at 37 °C. All base plasmids were a gift from Sandy Parkinson (University of Utah, Salt Lake City).
All plasmids, except for the scaffold 8xSH3, were made directly using sequence- and ligase-independent cloning (SLIC)44, a PCR-based recombination method. As PCR is unreliable for amplifying direct repeats, the scaffold 8xSH3 was made using a restriction enzyme-based BglBrick-like assembly45, and propagated in Stbl2 (Invitrogen). BglBrick assemblies make it possible to iteratively double the number of repeats in a construct through subsequent rounds of cloning, taking advantage of compatible restriction sites that can anneal to leave behind an uncleavable 6-nucleotide scar. All chemoreceptor mutants, chemoreceptor derivatives and transmembrane rods were expressed off derivatives of pRR48 (ref. 46). pRR48 is pBR322 derivative with an IPTG-inducible tac promoter, which unless otherwise noted was induced with 100 μM IPTG. Scaffold proteins were expressed off a derivative of pKG116, a salicylate-inducible derivative of pACYC184. Unless otherwise noted, all scaffold proteins were induced with 0.4 μM salicylate. YFP-CheR was expressed off of a plasmid derived from the arabinose-inducible pVS102 (ref. 8), and induced with 0.01% arabinose. All plasmid and protein sequences are available at the Harvard Dataverse.47
Silicon wafers (4″) were coated with FujiFilm OCG-825 G-line resist on a SVG 8626, exposed to a 10″ printed chromium mask (Fine Line Imaging) using a 10 × GCA 6200 wafer stepper, and developed on a separate SVG 8626. Agar microchambers were made by casting low melt agar (3% w/v) containing M9 minimal media and the division inhibitor cephalexin (50 μg ml−1) directly on the developed photoresist. A suspension of exponential cells growing in M9 with 0.4% glycerol were sandwiched between the agar chamber and a microscope coverslip, where there were grown at 33 °C for 3–4 h before imaging.
All microscopy was performed using a 1.4 NA × 100 objective on a Nikon TE2000 inverted microscope, equipped with a Sutter Instrument Lambda LS xenon arc lamp and an Andor iXon+ EMCCD. We used the Nikon filter set G2E/C for imaging RFP and FM-4-64, and custom filters for imaging YFP (505/20 excitation, 520LP emission). All image acquisition and microscope control was performed using custom software (C++, Python).
Images were analysed using custom written software written entirely in C++ and Python, drawing heavily on the NumPy, SciPy and Matplotlib Python modules. Cell outline segmentation was performed using a sub-pixel-weighted contour algorithm giving a series of points (x, y) as a function of distance along the outline, from which curvature was calculated as (x′y″−y′x″)/(x′2+y′2)3/2, where each partial derivative is with respect to distance along the outline. Code for contour tracing, curvature measurement and cluster intensity measurement are available at the Harvard Dataverse48. Curvatures <−0.7 or >0.7 μm−1 were ignored. Cluster intensities were measured by refining a 2D Gaussian onto raw image data that had undergone local background subtraction with a 2.5-μm Gaussian filter. Unless otherwise indicated, curvature enrichment histograms were weighted with the reciprocal of the corresponding whole-data set curvature probability. Relative curvature enrichment was calculated by normalizing to the average cluster frequency between −0.05 and 0.05 μm−1.
Cells were applied to a hydrophilic lacey carbon film supported on a copper grid, blotted and plunge frozen into liquid ethane using a manual plunger49. TEM images were collected on a JEOL JEM3100FFC equipped with in-column Omega energy filter, FEG electron source, cryo-stage maintained at 86 K, using a Gating CCD camera at the end of a decelerator50.
The following data and analysis code have been deposited in the Harvard Dataverse: plasmid and protein sequences47; raw curvature and cluster intensity data51; and code for contour tracing, curvature measurement and cluster intensity measurement48. The authors declare that all other data supporting the findings of this study are available within the article and its Supplementary Information files, or from the corresponding author upon request.
How to cite this article: Draper, W. & Liphardt, J. Origins of chemoreceptor curvature sorting in Escherichia coli. Nat. Commun. 8, 14838 doi: 10.1038/ncomms14838 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
We thank John Sandy Parkinson (University of Utah, Salt Lake City) for helpful discussions and generous gifts of E. coli strains and plasmids, and thank Roseann Csencsits (University of California, Berkeley) and Kenneth Downing (University of California, Berkeley) for performing electron microscopy. We also thank John Sandy Parkinson and Kerwyn Casey Huang (Stanford University) for careful readings of the manuscript. Finally, we thank Quanming Shi (Stanford University) for discussions and extensive help with lithography and Rajarshi Ghosh (Stanford University) for many helpful discussions. This work was partially supported by the National Institutes of Health (NIH) Grant GM77856 (to J.L.) and NIH/National Cancer Institute (NCI) Grants U54CA143836 (to J.L.).
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/