Featured
-
-
Article
| Open AccessUsing thermokinetic methods to enhance properties of epoxy resins with amino acids as biobased curing agents by achieving full crosslinking
- Melissa Walter
- , Marcel Neubacher
- & Bodo Fiedler
-
Article
| Open AccessCombined effect of interstitial-substitutional elements on dislocation dynamics in nitrogen-added austenitic stainless steels
- Yasuhito Kawahara
- , Shunya Kobatake
- & Jun-ichi Hamada
-
Article
| Open AccessEffect of fiber addition on strength and toughness of rubberized concretes
- Sameh Mohamed
- , Hesham Elemam
- & Hossam El-Din M. Sallam
-
Article
| Open AccessCreep failure of hierarchical materials
- Mahshid Pournajar
- , Paolo Moretti
- & Michael Zaiser
-
Article
| Open AccessBonding performance and surface characterization of cold-bonded acetylated beech (Fagus sylvatica L.) laminated veneer lumber
- Maik Slabohm
- & Holger Militz
-
Article
| Open AccessPrediction of steel plate-based damper for improving the behavior of concentrically braced frames based on RSM and ML approaches for sustainable structures
- Kennedy C. Onyelowe
- , Jorge Luis Yaulema Castañeda
- & Nakkeeran Ganasen
-
Article
| Open AccessBioactive glass–ceramics containing fluorapatite, xonotlite, cuspidine and wollastonite form apatite faster than their corresponding glasses
- Gloria Kirste
- , Altair Contreras Jaimes
- & Delia S. Brauer
-
Article
| Open AccessNumerical simulation of autoclaved aerated concrete masonry wall subjected to close-in explosion and the structural damage assessment
- Sheng Liu
- , Xiangyun Xu
- & Kezhi Yang
-
Article
| Open AccessMechanical characterization & regression analysis of Calamus rotang based hybrid natural fibre composite with findings reported on retrieval bending strength
- K. S. Lokesh
- , D. Shrinivasa Mayya
- & Shashank Kumar
-
Article
| Open AccessTransitioning solidification mode via electroplated Ni coatings in martensitic stainless steel resistance spot welds: new insights into fabricating tough microstructure
- Hamidreza Aghajani
- , Milad Bahrami Balajaddeh
- & Majid Pouranvari
-
Article
| Open AccessCrystal structures, phase transitions, thermodynamics, and molecular dynamics of organic–inorganic hybrid crystal [NH(CH3)3]2ZnCl4
- A Young Kim
- , Changyub Na
- & Ae Ran Lim
-
Article
| Open AccessExploring the various effects of Cu doping in hydroxyapatite nanoparticle
- Alireza Noori
- , Mahdieh Hoseinpour
- & Mahmoud Azami
-
Article
| Open AccessMachine learning optimization of bio-sandcrete brick modelling using response surface methodology
- Nakkeeran Ganasen
- , L. Krishnaraj
- & Liberty U. Stephen
-
Article
| Open AccessImproving the structural, optical, and electrical properties of carboxymethyl cellulose/starch/selenium oxide nanocomposites for flexible electronic devices
- Adel M. El Sayed
- & Tarek I. Alanazi
-
Article
| Open AccessJH-2 constitutive model of sandstone for dynamic problems
- Paweł Baranowski
- , Michał Kucewicz
- & Jacek Janiszewski
-
Article
| Open AccessPreparation and research of new black zirconia ceramics
- Yuxuan Ding
- & Qingchun Wang
-
Article
| Open AccessNear-perfect sound absorption using hybrid resonance between subwavelength Helmholtz resonators with non-uniformly partitioned cavities
- Eunji Choi
- & Wonju Jeon
-
Article
| Open AccessExploring nanoarchitectonics and optical properties of PAA-ZnO@BCP wide-band-gap organic semiconductors
- A. M. Mansour
- , Ali B. Abou Hammad
- & Amany M. El Nahrawy
-
Article
| Open AccessIntermetallic and dispersoid structures in AA3104 aluminium alloy during two-step homogenisation
- S. L. George
- & L. Magidi-Chicuba
-
Article
| Open AccessUnsupervised machine learning combined with 4D scanning transmission electron microscopy for bimodal nanostructural analysis
- Koji Kimoto
- , Jun Kikkawa
- & Fumihiko Uesugi
-
Article
| Open AccessPreparation and characterization of high-performance ceramic proppant from recycling utilization of oil-based drilling cuttings pyrolysis residues
- Yuanyi Yang
- , Hui Li
- & Yi Duan
-
Article
| Open Access2-Dimensional Ti3C2Tx/NaF nano-composites as electrode materials for hybrid battery-supercapacitor applications
- M. Bilal Riaz
- , Danish Hussain
- & Saqlain A. Shah
-
Article
| Open AccessStress–strain characteristics of FRP–PVC confined spontaneous combustion gangue concrete columns
- Jinyang Zhang
- , Haiqing Liu
- & Zimu Chen
-
Article
| Open AccessProperties of AlxGa1−xAs grown from a mixed Ga–Bi melt
- Olga Khvostikova
- , Alexey Vlasov
- & Vladimir Khvostikov
-
Article
| Open AccessAssessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions
- Ladislav Socha
- , Tomáš Prášil
- & Petr Nuska
-
Article
| Open AccessCrack reduction in laser powder bed fusion of MnAl(C) using graphene oxide coated powders
- Simon Tidén
- , Himesha Abenayake
- & Martin Sahlberg
-
Article
| Open AccessExperimental study on the significance of pressure relief effect and crack extension law under uniaxial compression of rock-like materials containing drill holes
- Lianhai Tai
- , Chong Li
- & Shihui Lu
-
Article
| Open AccessFacile green synthesis route for new ecofriendly photo catalyst for degradation acid red 8 dye and nitrogen recovery
- Nouf F. Al Harby
- , H. A. Fetouh
- & Mervette El-Batouti
-
Article
| Open AccessMultifunctional metallic nanocomposite for overcoming the strength–ductility trade-off
- Asheesh R. Lanba
- , Reginald F. Hamilton
- & Richard F. Gordon
-
Article
| Open AccessExperimental study on direct tensile fatigue performance of basalt fiber reinforced concrete
- Xutao Zhang
- , Chao Lou
- & Xikuan Lyu
-
Article
| Open AccessEffect of bio-polyol molecular weight on the structure and properties of polyurethane-polyisocyanurate (PUR-PIR) foams
- Adam Olszewski
- , Paulina Kosmela
- & Łukasz Piszczyk
-
Article
| Open AccessA proof of concept study on reliability assessment of different metal foil length based piezoelectric sensor for electromechanical impedance techniques
- Lukesh Parida
- , Sumedha Moharana
- & Guilherme Ascensão
-
Article
| Open AccessEvaluation of calcium carbide residue and fly ash as sustainable binders for environmentally friendly loess soil stabilization
- Phongthorn Julphunthong
- , Panuwat Joyklad
- & Tawat Suriwong
-
Article
| Open AccessDevelopment of deoxidation process for off-grade titanium sponge using magnesium metal with wire mesh strainer type of crucible
- Sung-Hun Park
- , Hyeong-Jun Jeoung
- & Jungshin Kang
-
Article
| Open AccessQuasi-instantaneous materials processing technology via high-intensity electrical nano pulsing
- Eugene A. Olevsky
- , Runjian Jiang
- & Elisa Torresani
-
Article
| Open AccessRapid and accurate predictions of perfect and defective material properties in atomistic simulation using the power of 3D CNN-based trained artificial neural networks
- Iman Peivaste
- , Saba Ramezani
- & Salim Belouettar
-
Article
| Open AccessRigid-foldable cylindrical origami with tunable mechanical behaviors
- Fengrui Liu
- , Tatsuro Terakawa
- & Masaharu Komori
-
Article
| Open AccessMaterial aspects of sintering of EAC-1A lunar regolith simulant
- Juan-Carlos Ginés-Palomares
- , Miranda Fateri
- & Andrea Zocca
-
Article
| Open AccessAxial stress versus strain responses of CFRP confined concrete containing electronic waste aggregates
- Saad Ullah
- , Muhammad Irshad Qureshi
- & Ekkachai Yooprasertchai
-
Article
| Open AccessImpact of crystalline orientation on Cu–Cu solid-state bonding behavior by molecular dynamics simulations
- Hiroaki Tatsumi
- , C. R. Kao
- & Hiroshi Nishikawa
-
Article
| Open AccessA study on the fabrication of metal microneedle array electrodes for ECG detection based on low melting point Bi–In–Sn alloys
- Hyunjong Gwak
- , Sungbo Cho
- & Soonmin Seo
-
Article
| Open AccessTailoring ultrabroadband near‐infrared luminescence in Bi-doped germanosilicate glasses
- A. Mehaboob
- , V. Fuertes
- & Y. Messaddeq
-
Article
| Open AccessExperimental investigation on the physical, microstructural, and mechanical properties of hemp limecrete
- Siva Avudaiappan
- , Pablo Ignacio Cuello Moreno
- & Julio Ignacio Flores Arrey
-
Article
| Open AccessEnergy-absorption analyses of honeycomb-structured Al-alloy and nylon sheets using modified split Hopkinson pressure bar
- Selim Kim
- , Minu Kim
- & Sunghak Lee
-
Article
| Open AccessProgressive failure analysis of perforated composite laminates considering nonlinear shear effect
- Z. R. Wu
- , Yirong Yang
- & Hang Lei
-
Article
| Open AccessMathematical models of apparent viscosity as a function of water–cement/binder ratio and superplasticizer in cement pastes
- Yong Yuan
- , Xiaoyun Wang
- & Ying Dai
-
Article
| Open AccessEffect of C content on the microstructure and properties of in-situ synthesized TiC particles reinforced Ti composites
- Ning Wang
- , Yongbum Choi
- & Kazuhiro Matsugi
-
Article
| Open AccessA comprehensive study on the fire resistance properties of ultra-fine ceramic waste-filled high alkaline white cement paste composites for progressing towards sustainability
- M. A. Abdelzaher
- , Asmaa S. Hamouda
- & Ibrahim M. El-Kattan
-
Article
| Open AccessBiaxial tensile behavior of stainless steel 316L manufactured by selective laser melting
- Hao Wang
- , Xiaoyong Shu
- & I. V. Alexandrov