Article
|
Open Access
Featured
-
-
Article
| Open AccessValidation of computational fluid dynamics models for airway deposition with SPECT data of the same population
- Hosein Sadafi
- , Navid Monshi Tousi
- & Jan De Backer
-
Article
| Open AccessValidation of numerical simulations and experiments on impulse characteristics induced by self-excited oscillation
- Qiang Wu
- , Guodong Ji
- & Jinyong Guo
-
Article
| Open AccessResearch on fabric surface defect detection algorithm based on improved Yolo_v4
- Yuanyuan Li
- , Liyuan Song
- & Ming Tang
-
Article
| Open AccessOptimization design of brushless DC motor based on improved JAYA algorithm
- Yuan Cheng
- , Xueli Lyu
- & Shasha Mao
-
Article
| Open AccessSocial perception of robots is shaped by beliefs about their minds
- Ali Momen
- , Kurt Hugenberg
- & Eva Wiese
-
Article
| Open AccessUltrasonic irrigation flows in root canals: effects of ultrasound power and file insertion depth
- A. Koulogiannis
- , A. D. Walmsley
- & S. Balabani
-
Article
| Open AccessExperimental studies on the characteristics of chisel picks in coal cutting for bucket wheel excavators
- Zhenning Su
- , Bo Song
- & Mingmin Guo
-
Article
| Open AccessDesign and analysis of centrifugal compressor in carbon dioxide heat pump system
- Peng Jiang
- , Yong Tian
- & Chaohong Guo
-
Article
| Open AccessA new model for compressor surge and stall control
- M. J. Shahriyari
- , A. Firouzabadi
- & S. M. Esmailifar
-
Article
| Open AccessBearing fault detection by using graph autoencoder and ensemble learning
- Meng Wang
- , Jiong Yu
- & Yiran Liu
-
Article
| Open AccessIInception-CBAM-IBiGRU based fault diagnosis method for asynchronous motors
- Zhengting Li
- , Peiliang Wang
- & Ruining Jia
-
Article
| Open AccessElectromagnetic forming of AA1060 sheet based on mixed forces generated by a three-coil dual-power system
- Yanxin Li
- , Bo Tang
- & Xiang Zhao
-
Article
| Open AccessMuscle-inspired bi-planar cable routing: a novel framework for designing cable driven lower limb rehabilitation exoskeletons (C-LREX)
- Rajan Prasad
- , Marwan El-Rich
- & Kinda Khalaf
-
Article
| Open AccessThe comparative transient prediction on hydrodynamic characteristics and flow field properties of pump-jets with accelerating and decelerating ducts
- Yunkai Zhou
- , Jianping Yuan
- & Quanlin Gao
-
Article
| Open AccessDesign and testing of ultrasound probe adapters for a robotic imaging platform
- Krysta-Lynn Amezcua
- , James Collier
- & Eric J. Snider
-
Article
| Open AccessA PLC-based pomegranate sprout removal device design
- Liqi Qiu
- , Jingbin Sun
- & Ying Zhao
-
Article
| Open AccessComparative analysis of the quality of execution of road surfaces on newly built, reconstructed and renovated roads in the city Płock area (Poland)
- Piotr Gryszpanowicz
- , Natalia Gasik-Kowalska
- & Konrad J. Waluś
-
Article
| Open AccessLarge rectangular cross-section tunnel undercrossing urban road by micro pipe jacking and joint assembly structure (MPJ & JAS) method in soft soils
- Jia Zou
- , Xiongyao Xie
- & Isam Shahrour
-
Article
| Open AccessVibrational analysis of double-walled silicon carbide nano-cones: a finite element investigation
- S. Nickabadi
- , R. Ansari
- & P. Aghdasi
-
Article
| Open AccessControlled synchronization of three co-rotating exciters based on a circular distribution in a vibratory system
- Lei Jia
- , Yang Tian
- & Xin Zhang
-
Article
| Open AccessAn online monitoring method of milling cutter wear condition driven by digital twin
- Xintian Zi
- , Shangshang Gao
- & Yang Xie
-
Article
| Open AccessTargeted worker removal reveals a lack of flexibility in brood transport specialisation with no compensatory gain in efficiency
- Sean McGregor
- , Fazil E. Uslu
- & Laurent Keller
-
Article
| Open AccessNumerical study and orthogonal analysis of optimal performance parameters for vertical cooling of sintered ore
- Weishu Wang
- , Shuailong Li
- & Weihui Xu
-
Article
| Open AccessExperimental study and finite element analysis of heavy-duty escalator truss under full load conditions
- Ning Li
- , Zhongxi Cao
- & Mingming Yan
-
Article
| Open AccessShear stiffening gel-enabled twisted string for bio-inspired robot actuators
- Qingqing Zhang
- , Yuxuan Xue
- & Ning Xi
-
Article
| Open AccessIn silico optimization of aligned fiber electrodes for dielectric elastomer actuators
- Mohammadreza Firoozan
- , Majid Baniassadi
- & Alex Chortos
-
Article
| Open AccessEnhanced mixing efficiency and reduced droplet size with novel droplet generators
- Ali Kheirkhah Barzoki
-
Article
| Open AccessDetection of incipient rotor unbalance fault based on the RIME-VMD and modified-WKN
- Qian Wang
- , Shuo Hu
- & Xinya Wang
-
Article
| Open AccessA novel method for evaluating load restraint assemblies to ensure the safety of railway freight transportation
- Duo Zhang
- , Su-Mei Wang
- & Qi-Yuan Peng
-
Article
| Open AccessFabrication of CP-Ti structure with controllable wettability using powder bed fusion and eco-friendly post-process
- Won-Jung Oh
- , Donghyun Kim
- & Chung-Soo Kim
-
Article
| Open AccessLeader–follower UAVs formation control based on a deep Q-network collaborative framework
- Zhijun Liu
- , Jie Li
- & Pengyun Chen
-
Article
| Open AccessA novel neural network-based framework to estimate oil and gas pipelines life with missing input parameters
- Nagoor Basha Shaik
- , Kittiphong Jongkittinarukorn
- & Kishore Bingi
-
Article
| Open AccessShock impact simulation model along with the harmonic effect of the working device
- Andrzej Grządziela
- , Marcin Kluczyk
- & Krzysztof Naus
-
Article
| Open AccessEffect of post-weld heat-treatment and solid-state thermomechanical treatment on the properties of the AA6082 MIG welded joints
- Hossam Hemdan El-Fahhar
- , Elshafey Ahmed Gadallah
- & Ramy A. Fouad
-
Article
| Open AccessSensory manipulation as a countermeasure to robot teleoperation delays: system and evidence
- Jing Du
- , William Vann
- & Qi Zhu
-
Article
| Open AccessOptimization of gearbox housing shape for agricultural UTV using structural–acoustic coupled analysis
- Beom-Soo Kim
- , Hyun-Woo Han
- & Young-Jun Park
-
Article
| Open AccessNumerical simulation and tool parameters optimization of aluminum alloy transmission intermediate shell
- Haiyue Zhao
- , Yan Cao
- & Chunlei Tian
-
Article
| Open AccessMulti-level index construction method based on master–slave blockchains
- Haolin Zhang
- , Su Li
- & Junlu Wang
-
Article
| Open AccessWelding of thin stainless-steel sheets using a QCW green laser source
- E. Haddad
- , F. Poggenburg
- & A. Olowinsky
-
Article
| Open AccessThe potential influence of the ligament of Wieger on the crystalline lens shape
- Hosna Ghaderi
- , Sorcha Ní Dhubhghaill
- & Jos J. Rozema
-
Article
| Open AccessCoupling vibration analysis of heat exchanger tube bundles under different stiffness conditions
- Yifang Yin
- , Zunce Wang
- & Mingming Ge
-
Article
| Open AccessStructural effects of asymmetric magnet shape on performance of surface permanent magnet synchronous motors
- Jungwoo Choe
- , Hyuksung Kwon
- & Hongyun So
-
Article
| Open AccessA planar tracking strategy based on multiple-interpretable improved PPO algorithm with few-shot technique
- Xiao Wang
- , Zhe Ma
- & Jiake Li
-
Article
| Open AccessMechanical characterization & regression analysis of Calamus rotang based hybrid natural fibre composite with findings reported on retrieval bending strength
- K. S. Lokesh
- , D. Shrinivasa Mayya
- & Shashank Kumar
-
Article
| Open AccessDefect detection by multi-axis infrared process monitoring of laser beam directed energy deposition
- T. Herzog
- , M. Brandt
- & A. Molotnikov
-
Article
| Open AccessApplying AVWEWM to ethical decision-making during autonomous vehicle crashes
- Guoman Liu
- , Yufeng Luo
- & Jing Sheng
-
Article
| Open AccessStress and strain analysis and parameter optimization of pipe truss tower connection of super-large tower crane based on FEM
- Guang Zeng
- , Kun Chen
- & Yalong Zhang
-
Article
| Open AccessAn analytical performance approach for RCS/RS with one robot serving multiple stack heights under a one-path relocation strategy
- Philipp Trost
- & Michael Eder
-
Article
| Open AccessEconomic tolerance design of the P2 raceway based on the quasi-static model of aerospace ball bearings
- Zhou Chang
- , Lai Hu
- & Wenhan Cao