Our Editorial Board Members are active researchers recognized as experts in their field. They handle manuscripts within their areas of expertise, overseeing all aspects of the peer review process from submission to acceptance.
Editorial Board Members work closely with our in-house editors to ensure that all manuscripts are subject to the same editorial standards and journal policies.
Andreja Benčan Golob
Research areas: piezoelectrics, complex oxides, electron microscopy
Andreja Benčan Golob is a senior scientist at Electronic Ceramics Department, Jožef Stefan Institute and Associate Professor at the Jožef Stefan International Postgraduate School, Ljubljana, Slovenia. She received her PhD in 2002 in the field of materials at the Faculty of Chemistry and Chemical Technology at the University of Ljubljana, Slovenia. Her main research interest is the synthesis and characterisation of piezoelectric, ferroelectric and multiferroic oxide materials in single crystal, bulk or thin and thick film form. Her research focuses on structural investigations of various functional materials, with emphasis on environmentally friendly piezoelectric ceramic materials, using scanning and transmission electron microscopy and microanalysis techniques down to the atomic level.
Research areas: Biomaterials, regenerative medicine, mechanobiology
Steven Caliari joined the University of Virginia in 2016 as an Assistant Professor in the Department of Chemical Engineering with a secondary appointment in the Department of Biomedical Engineering. Previously he was a National Institutes of Health (NIH) Postdoctoral Fellow in the Department of Bioengineering at the University of Pennsylvania. Steven completed his B.S. in Chemical Engineering at the University of Florida and received both his M.S. and Ph.D. in Chemical Engineering from the University of Illinois at Urbana-Champaign. His lab designs, synthesizes, and characterizes new biomaterials to explore the dynamic interplay between cells and their microenvironment, applying these platforms to address fundamental human health challenges in understanding disease and engineering tissues. Steven recently received the NIH Maximizing Investigators’ Research Award.
Research areas: drug delivery, sensors, nanomaterials
Rona Chandrawati is a Scientia Associate Professor and National Health and Medical Research Council Emerging Leadership Fellow at the School of Chemical Engineering, The University of New South Wales, Australia. She obtained her Ph.D. from The University of Melbourne in 2012 and was then a Marie Curie Fellow at Imperial College London before returning to Australia in 2015 to head the Nanotechnology for Food and Health Laboratory. Her research interests are focused on the development of nanoparticles, polymers, natural enzymes and enzyme mimics for drug delivery and sensing.
Research areas: micro- and nano-structured materials, solid mechanics, multiscale modelling
Xiaoyan Li received his Ph.D. degree from Brown University in 2012. He is currently a tenured Associate Professor in the Department of Engineering Mechanics, Tsinghua University. His research interests include deformation and fracture of micro- and nano-structured materials (including nanocrystalline and nanotwinned materials, low-dimensional nanomaterials and energy storage materials), design, fabrication and mechanics of high entropy alloys and metamaterials, and development of multiscale modelling. He received the Extreme Mechanics Letters Young Investigator Award in 2018 and the Eshelby Mechanics Award for Young Faculty in 2018.
Research areas: Nanomaterials, 3D printing, synthesis
Cecilia Mattevi is an Associate Professor and Royal Society University Research Fellow in the Department of Materials at Imperial College London. Cecilia earned her Laurea Degree and her Ph.D. in materials science from the University of Padua. Her research focuses on the precise synthesis of 2D materials and their assembly into 3D functional devices, such as supercapacitors, batteries, and sensors. The precise synthesis aims at achieving a critical level of control of material properties through the crystal structure, followed by their assembly via the formulation of visco-elastic inks which can be 3D printed in a continuous filament, layer-by-layer. Cecilia is a Fellow of the Royal Society of Chemistry.
Research areas: dynamics at surfaces, machine learning, photoelectrocatalysis
Reinhard Maurer is an Associate Professor of Computational Chemistry at the University of Warwick. He received a Diploma degree in Computational Chemistry from the University of Graz (Austria) in 2010 and a Ph.D. in Chemistry in 2014 from the Technical University Munich (Germany). He was a postdoctoral researcher at Yale University before starting his independent career in 2017. His research interests include non-thermal chemical dynamics at surfaces, molecular device design, and the development of machine learning and first-principles methods to study problems in heterogeneous catalysis and surface science. He received the TU Munich President’s Young Investigator Award in 2016 and was a Runner-Up for the Psi-K Volker Heine Early Career Award in 2018.
Research areas: ultrafast dynamics, light-matter interaction, optoelectronics
Klaas-Jan Tielrooij is the leader of the Ultrafast Dynamics in Nanoscale Systems group at the Catalan Institute of Nanoscience and Nanotechnology (ICN2) in Barcelona, Spain. Previously, he was visiting professor in Mainz, Germany, and research fellow at the Institute of Photonic Sciences (ICFO) in Spain. He obtained his Ph.D. from the University of Amsterdam, the Netherlands, for which he received the FOM Physics Thesis Prize 2011. His research interests are in the field of ultrafast dynamics, optoelectronics, nonlinear optics and light-matter interaction. His current research focuses on heat and charge transport in nanoscale material systems.
Research areas: ab initio simulations, artificial intelligence, organic/inorganic interfaces
Milica Todorović is a Research Fellow and unit leader at the Department of Applied Physics, Aalto University. She gained an MSci in Physics at University College London, followed by a DPhil in Materials Science from Merton College at the University of Oxford. She went on to specialise in development and high performance computing applications of large-scale first principles calculations at the National Institute for Materials Science, Japan, and scanning probe microscopy simulations at Universidad Autonoma de Madrid before settling in Finland. Her research focuses on interfacing artificial intelligence algorithms with first principles simulations of materials with the aim to optimise material functionality.
Research areas: Electrocatalysis, renewable energy, nanomaterials
Haotian Wang is a William Marsh Rice Trustee Chair Assistant Professor in the Department of Chemical and Biomolecular Engineering at Rice University. He obtained his PhD degree in the Department of Applied Physics at Stanford University in 2016 and his Bachelor of Science in Physics at the University of Science and Technology of China in 2011. In 2016 he was awarded the Rowland Fellowship and began his independent research career at Harvard University as principal investigator. He received the Azrieli Global Scholar award from the Canadian Institute for Advanced Research. His research focuses on developing catalytic materials and reactors for energy and environmental applications, including energy storage, chemical/fuel generation and water treatment.
Research areas: batteries, electrochemical energy storage, electrochemistry
Jie Xiao is a Laboratory Fellow and Group Leader in the Battery Materials & Systems group at Pacific Northwest National Laboratory. She obtained her Ph.D degree in materials chemistry from State University of New York at Binghamton. Her research interests range from materials synthesis and electrochemical kinetics to cell design and fabrication, with the goal of understanding synthesis-structure-performance relationships and their underlying reaction mechanisms at the atomic level and in realistic systems. She is the recipient of awards such as Distinguished Inventor of Battelle, The Electrochemical Society Battery Division Technology Award, Federal Laboratory Consortium Award for Excellence in Technology Transfer and Young Researcher Award from International Automotive Lithium Battery Association etc.
Research areas: Organic and flexible electronics, polymer science
Jie Xu has been an Assistant Scientist at Argonne National Lab since 2018. Her research focuses on engineering molecular packing structures under non-equilibrium state, with the aim of achieving organic materials with advanced properties for electronics. She received her PhD degree in chemistry from Nanjing University in 2014, with her research focusing on understanding molecular packing structures and dynamic behavior in confined soft matter. Subsequent postdoctoral training at Stanford University applied her background in polymer physics to the emerging field of skin-like electronics, with the development of a new class of polymer-based stretchable electronic material and the realization of integrated, intrinsically stretchable transistors and circuits.