Tissue engineering strategies to construct vascularized bone grafts are now attracting much attention. Strontium-hardystonite-Gahnite (Sr-HT-Gahnite) is a strong, highly porous, and biocompatible calcium silicate based bio-ceramic that contains strontium and zinc ions. Adipose derived stem cells (ASCs) have been demonstrated to have the ability in promoting osteogenesis and angiogenesis. In this study, the effects of Sr-HT-Gahnite on cell morphology, cell proliferation, and osteogenic differentiation of ASCs were systematically investigated. The cell proliferation, migration and angiogenic differentiation of human umbilical vein endothelial cell (HUVECs) were studied. Beta-tricalcium phosphate/hydroxyapatite (TCP/HA) bioceramic scaffolds were set as the control biomaterial. Both bio-ceramics exhibited no adverse influence on cell viability. The Sr-HT-Gahnite scaffolds promoted cell attachment and alkaline phosphatase (ALP) activity of ASCs. The Sr-HT-Gahnite dissolution products enhanced ALP activity, matrix mineralization, and angiogenic differentiation of ASCs. They could also improve cell proliferation, migration, and angiogenic differentiation of HUVECs. Levels of in vivo bone formation with Sr-HT Gahnite were significantly higher than that for TCP/HA. The combination of Sr-HT-Gahnite and ASCs promoted both osteogenesis and angiogenesis in vivo study, compared to Sr-HT-Gahnite and TCP/HA bio-ceramics when administered alone, suggesting Sr-HT-Gahnite can act as a carrier for ASCs for construction of vascularized tissue-engineered bone.
Large (or ‘critical-sized’) bone defects, which cannot heal without intervention, arise from traumatic injury, infection and tumour resection, and present a major challenge in orthopaedic medicine. Current treatments using autografts or allografts have serious limitations due to second site surgery, donor site morbidity, limited availability, and limited integration with native bone. More importantly, the healing of large bone defects remains challenging using standard bone grafting procedures.
A tissue-engineered graft composed of bioactive scaffolds with mesenchymal stem cells would be a promising bone graft for critical size bone defects1. During ossification and bone repair process, the newly formed blood vessels are important for providing oxygen, nutrients, cytokines and growth factors. The close correlation between bone formation and vascularization is referred to as ‘angiogenic-osteogenic coupling’2. However, inducing vascular ingrowth during bone regeneration remains a challenge.
Efforts have been directed towards incorporating pro-angiogenic factors into tissue-engineered constructs in order to enhance their angiogenic potential3,4,5,6,7. Evidence emerged in recent studies that bioactive glasses/ceramics or their dissolution products not only enhance new bone formation but also could stimulate the expression of angiogenesis related genes. The potential for angiogenic induction by calcium silica-based materials suggests that it could be an alternative to inductive growth factors8,9,10,11. For their excellent osteogenic activity, calcium silicate based materials have been investigated for bone regeneration12. They are able to stimulate the osteogenic differentiation of stem and progenitor cells13. Calcium (Ca) and silica (Si) elements have been known to promote osteoblasts proliferation and differentiation, as well as stimulate the pro-angiogenesis of HUVECs14. Strontium (Sr) ions have been confirmed to stimulate bone formation and decrease bone resorption both in vitro and in vivo studies15,16. In addition, they increase the proliferation and migration of endothelial cells suggesting their positive role in osteogenesis and pro-angiogenesis17. Incorporation of Sr into calcium-silica bio-ceramic induced superior osteoinductivity and angiogenesis compared with a calcium-silica bio-ceramic18. We have recently developed a multi-component Sr and zinc (Zn) containing ceramic, Strontium-hardystonite-Gahnite (Sr-Ca2ZnSi2O7-ZnAl2O4), hereafter called Sr-HT Gahnite. Its mechanical properties closely match those of cancellous bone (compressive strength of 6 MPa19,20. Moreover, 3D printed Sr-HT Gahnite scaffolds showed a mechanical strength comparable to cortical bone that make them a potential candidate for treatment of segmental bone defects21.
Strontium and zinc ions released by this ceramic are known to promote bone regeneration. The implantation of Sr-HT-Gahnite scaffolds in radial defect model in the rabbits exhibited better new bone formation, compared to that obtained with TCP/HA scaffolds. Sr-HT-Gahnite promotion of osteogenesis may be attributable to the presence of Sr and Si. Sr-HT Gahnite scaffolds may indeed be the type of construct that induces vascularized tissue-engineered bone.
Another important element for bone engineering is the mesenchymal stem cells. It plays a important role in the successful restoration of tissue morphology and function22. As one of the most commonly used type of adult mesenchymal stem cells, ASCs are known to possess good bone regenerative23 and angiogenic24 capacity. ASCs exhibit a pericyte-like phenotype and function. They may play a role in blood vessels maturation and remodeling25,26. In addition, they have been shown to secrete multiple angiogenic growth factors, such as hepatocyte growth factor (HGF) and vascular endothelial growth factor (VEGF)27,28. Considering the excellent osteogenic and angiogenic ability of both Sr-HT-Gahnite and ASCs, we hypothesize that an appropriate cell-biomaterial construct combining both elements may be a more effective approach for promoting both angiogenesis and osteogenesis.
24 hours after cultured on the two materials, ASCs were observed and the results were illustrated in Fig. 1. Cells cultured on Sr-HT-Gahnite scaffolds appeared much flatter than those seeded on TCP/HA scaffolds.
ASCs were cultured with different concentrations of TCP/HA and Sr-HT-Gahnite dissolution products (1/258, 1/126, 1/64, 1/32, 1/16, 1/8, 1/4, 1/2 of 2 mg/mL) in osteogenic medium for 1, 4 and 7 days. As illustrated in Fig. 2A and B, the results of the MTT assay showed that both TCP/HA and Sr-HT-Gahnite exhibited no evidence of cytotoxicity. There was no obvious effect on metabolic activity in TCP/HA and Sr-HT-Gahnite groups compared to the blank control at day 1 and day 4. At day 7, higher concentrations of TCP/HA and Sr-HT-Gahnite dissolution products (1/16, 1/8, 1/4, 1/2 of 2 mg/mL) showed a decrease in cell metabolic activity. As shown in Fig. 2C, there was no obvious difference between TCP/HA and Sr-HT-Gahnite at the same concentration (1/32 of 2 mg/mL). There was no significant difference in total cell metabolic activity when ASCs were cultured on the two scaffolds as illustrated in Fig. 2D.
Cell differentiation in dissolution products and on the scaffolds
ASCs were cultured in TCP/HA and Sr-HT-Gahnite dissolution products at 1/32 dilution for the ALP activity assay. As shown in Fig. 3A, the cells treated with the Sr-HT-Gahnite dissolution products exhibited more pronounced ALP staining areas compared to the cells treated with the TCP/HA dissolution products. A semi-quantitative study was performed after 7, 10 and 14 days culture for dissolution products of TCP/HA and Sr-HT-Gahnite at 1/32 dilution. The results are shown in Fig. 3B. ALP activity of the Sr-HT-Gahnite dissolution products at day 7 and day 10 was significantly higher compared to the TCP/HA dissolution products. After 14 days culture, there was no distinct difference between two dissolution products at the 1/32 dilution. Semi-quantification analysis results from cells seeded on the two scaffolds are shown in Fig. 3C. ALP activity of ASCs at day 7 and day 14 was significantly enhanced on Sr-HT-Gahnite scaffolds compared to TCP/HA scaffolds. The results of Alizarin Red S staining were illustrated in Fig. 3D. Matrix mineralization was increased with Sr-HT-Gahnite dissolution products compared to TCP/HA dissolution products. The semi-quantitative analysis shown in Fig. 3E remained the same tendency the ARS staining findings. The ion concentrations of Ca, Si, Sr, Zn, and Al in TCP/HA and Sr-HT-Gahnite dissolution products are illustrated in Table 1. According to the ICP-AES data, only Ca and P ions were released from TCP/HA. In the dissolution product from Sr-HT-Gahnite particles, Ca, Si, Sr and Zn ions were examined and displayed. The Ca ion concentration in Sr-HT-Gahnite group was almost three times higher than that in TCP/HA group. There were none Al ion tested both in the dissolution products of TCP/HA and Sr-HT-Gahnite.
ASCs were cultured in TCP/HA and Sr-HT-Gahnite dissolution products at 1/32 dilution for 4 and 7 days to analyze the expression of angiogenic genes (Fig. 4). At day 4, the differences between TCP/HA group and Sr-HT-Gahnite group in the mRNA expression of hypoxia-inducible factor-1α (HIF-1α), and angiogenin-1 (ANG-1) was not significant, while the vascular endothelial growth factor-α (VEGF-α) mRNA expression of Sr-HT-Gahnite group was significantly enhanced compared to that of TCP/HA group. At day 7, expression of VEGF-α, HIF-1α, ANG-1, which reflect angiogenic differentiation, were promoted by the Sr-HT-Gahnite extracts compared to the TCP/HA dissolution products.
Effects of dissolution products on HUVECs proliferation, migration, and differentiation
HUVECs were cultured with TCP/HA and Sr-HT-Gahnite dissolution products at1/32 dilution for MTT assay and transwell assay. As shown in Fig. 5A, the results of MTT assay illustrated that both TCP/HA and Sr-HT-Gahnite increased metabolic activity of HUVECs compared to the blank control at day 1, 4 and 7. At day 1 and day 4, there was no obvious difference in the metabolic activity for HUVECs treated with TCP/HA and Sr-HT-Gahnite dissolution products. At day 7, Sr-HT-Gahnite dissolution products induced increased metabolic activity compared to the TCP/HA dissolution products. According to the results of transwell assay illustrated in Fig. 5B and C, HUVECs migration through transwell chambers significantly increased in response to Sr-HT-Gahnite dissolution products compared to TCP/HA dissolution products. After culturing HUVECs in the presence of different dilutions (1/32, 1/16 and 1/8) of TCP/HA and Sr-HT-Gahnite dissolution products for 4 day, angiogenesis related mRNA expression was tested. As shown in Fig. 5D–F, the mRNA expression levels of VEGF-α, HIF-1α were significantly increased by the Sr-HT-Gahnite dissolution products at different dilutions (1/32, 1/16 and 1/8) compared to TCP/HA dissolution products at the same concentration, while the mRNA expression levels of ANG-1 were promoted by the Sr-HT-Gahnite dissolution products at 1/16 dilution compared to TCP/HA dissolution products at the same concentration. There were no significant differences in expression between dissolution products of TCP/HA and Sr-HT-Gahnite at 1/8 and 1/32 dilution.
In vivo study
Fluorochrome labeling histomorphometrical analysis
Fluorescent labeling illustrates differences in newly formed bone area and mineralization at 4 and 6 weeks after surgery (Fig. 6A). The quantification data is provided in Fig. 6B. At week 4, the Sr-HT-gahnite (8.3 ± 0.9%) and Sr-HT-gahnite/ASCs scaffolds (18.6 ± 0.7%) showed a higher percentage of AL labeling area, as compared to TCP/HA (1.7 ± 0.1%) and TCP/HA/ASCs scaffolds (3.8 ± 0.3%). There was also a significant difference between TCP/HA and TCP/HA/ASCs scaffolds, and Sr-HT-gahnite and Sr-HT-gahnite/ASCs scaffolds respectively (p < 0.01). At week 6, the percentage of CA labeling in the group with Sr-HT-gahnite/ASCs scaffolds (24.4 ± 0.6%) was higher than that in groups with TCP/HA alone (3.2 ± 0.1%), TCP/HA/ASCs (9.5 ± 1.2%), and Sr-HT-gahnite alone (15.3 ± 1.4%). The percentage of CA labeling in the group with Sr-HT-gahnite alone was higher than those in TCP/HA (p < 0.01) and TCP/HA/ASCs (p < 0.01). The difference between TCP/HA and TCP/HA/ASCs was also significant (p < 0.01).
Histological analysis of bone regeneration
The undecalcified specimens were stained with Van Gieson’s picro fuchsin for histological analysis of new bone formation. As shown in Fig. 7A, the newly formed bone almost filled the calvarial defect in Sr-HT-gahnite/ASCs scaffolds group. There was new bone tissue formed in the TCP/HA/ASCs and Sr-HT-gahnite scaffolds, but less compared to the Sr-HT-gahnite/ASCs scaffolds. In the TCP/HA group, there was little bone observed in the calvarial defect. The percentage of new bone area was 0.5 ± 0.5%, 6.6 ± 1.4%, 5.8 ± 1.5%, 14.5 ± 3.2% for the TCP/HA, TCP/HA/ASCs, Sr-HT-gahnite and Sr-HT-gahnite/ASCs, respectively (Fig. 7B).
For the evaluation of new blood vessels formation in calvarial defect area, the histological analysis of Microfil perfusion was performed. Blue spots from Microfil perfusion represented blood vessels. As shown in Fig. 8A and B, blood vessels could be observed in the TCP/HA group, but fewer blood vessels were formed compared to TCP/HA/ASCs group and Sr-HT-gahnite group. There were more newly formed blood vessels in Sr-HT-gahnite/ASCs group compared to the Sr-HT-gahnite group and the TCP/HA/ASCs group. The histomorphometric assay showed that the percentage of new vessel area was 1.9 ± 0.2‰, 2.8 ± 0.9‰, 3.0 ± 0.2‰, 6.7 ± 1.01‰ for the TCP/HA alone, TCP/HA/ASCs, Sr-HT-gahnite alone and Sr-HT-gahnite/ASCs group, respectively.
The use of stem cells has been designed to promote angiogenesis and osteogenesis for bone defect healing in tissue engineering approaches. As an abundant source of mesenchymal stem cells, adipose tissue became the focus of considerable interest in regenerative tissue engineering in recent decades. Due to its relatively high abundance and easy access, ASCs exhibit a potential advantage over other types of mesenchymal cells for clinical translation into regeneration therapies.
ASCs exhibit a strong capacity for in vitro expansion. A variety of approaches have been used to strengthen its multiple differentiation ability. In this study, we applied a scaffold, Sr-HT-Gahnite, to improve the osteogenic differentiation ability of ASCs and further enhance bone regeneration in vivo.
A variety of calcium silicate-based materials have been studied as promising bone substitutes. Bioactive trace elements such as Sr and Zn have been commonly utilized to improve the bioactivity and osteogenic differentiation ability of these materials15,29,30. As essential elements for the human body, calcium and silicon ions have been demonstrated to improve osteogenic differentiation of ASCs31,32. We assumed that the much higher concentration of Ca and Si ion released from Sr-HT-Gahnite attributed to its better osteogenic activity both in vitro and in vivo. The treatment of Sr ion could not only enhance the cell proliferation and osteogenic differentiation of ASCs in vitro33, but also accelerate new bone matrix formation in vivo34.
Zn is a crucial component of zinc finger-containing transcription factors. It plays important roles in bone development and mineralization35. Sr-HT-Gahnite is a mechanically strong and tough ceramic. It can be fabricated as a highly porous scaffold. As expected, the incorporation of Ca, Si, Sr, Zn ions in ceramic dissolution products improved the bioactivity and osteogenic differentiation of ASCs in vitro and their presence in scaffolds enhanced bone regeneration in vivo.
When ASCs were cultured on Sr-HT-Gahnite scaffolds, cells spread very well with more extensive spreading than seen with the control scaffold. The MTT assay reflects cells’ proliferative ability. There was no adverse effect on cell proliferation observed with Sr-HT-Gahnite scaffolds compared to TCP/HA scaffolds. When ASCs were cultured in the dissolution products of Sr-HT-Gahnite at day 1 and day 4, no decrease in cell proliferation occurred even in the highest dilution of 1/2. At day 7, higher dilutions from 1/2 to 1/16 showed a slight reduction in cell proliferation, while dilutions from 1/32 to 1/256 exhibited no adverse effect on cell metabolic activity. In addition, metabolic activity observed between the cells cultured in dissolution products at a dilution of 1/32 for either Sr-HT-Gahnite or clinically used TCP/HA showed no significant difference. This phenomenon confirmed the acceptable biocompatibility of Sr-HT-Gahnite. The ALP activity analysis results from cells cultured in dissolution products or on scaffolds suggested that the osteogenic differentiation ability of ASCs were enhanced by Sr-HT-Gahnite treatment. The ARS staining and semi-quantification of cells cultured in dissolution products of Sr-HT-Gahnite further confirmed its osteogenic activity in vitro study.
For in vivo study, a critical-sized calvarial bone defect model in rats was used to assess the potential effect of Sr-HT-gahnite/ASCs complex on promoting vascularized bone formation. According to the results of histological analysis of bone regeneration in vivo, there was little new bone observed in the TCP/HA group, while more newly formed bone was observed in the Sr-HT-Gahnite group. When Sr-HT-Gahnite and TCP/HA scaffolds were seeded with ASCs, there was obviously more bone tissue formed, especially in the Sr-HT-Gahnite/ASCs group. ASCs are known for their ability to accelerate new bone formation and promote angiogenesis by secreting angiogenic factors. Containing ions including Ca, Si, and Sr, Sr-HT-Gahnite scaffolds have been confirmed to be beneficial to angiogenesis. Angiogenesis and neo-vascularization are important for cell survival, integration and regeneration of new bone tissue. In the absence of ASCs, more newly formed blood vessels were achieved for the Sr-HT-Gahnite group as compared with the control TCP/HA group in vivo. When seeded with cells, the amount of newly formed blood vessels was promoted in both the Sr-HT-Gahnite/ASCs group and the TCP/HA/ASCs group.
In the present study, the dissolution products of Sr-HT-Gahnite up-regulated the expressions of VEGF-α, HIF-1α and ANG-1 by ASCs in vitro, which indicated the stimulatory effect of Sr-HT-Gahnite on the angiogenic activity of ASCs as we expected. VEGF regulates all the critical steps of angiogenesis related processes including endothelial cell proliferation, migration and tube formation. It has been known as a key angiogenic factor for its crucial role in enhancing blood vessel formation. In this study, the dissolution products of Sr-HT-Gahnite and TCP/HA could both stimulate the proliferation of HUVECs, however, the stimulatory effect of Sr-HT-Gahnite was higher than that of TCP/HA. In addition, HUVECs migration across the membrane of a transwell was increased in Sr-HT-Gahnite group, indicating its superior ability to promote cell migration. Moreover, the mRNA expression of VEGF-α and HIF-1α were up-regulated when HUVECs were cultured in the dissolution products at dilutions of 1/8, 1/16 and 1/32, and the mRNA expression of ANG-1 was up-regulated at the dilution of 1/16. All of these results indicated that the in vitro induction of angiogenesis was enhanced by dissolution products of Sr-HT-Gahnite, which probably can be attributed to the incorporation of Ca, Si and Sr ions. According to our results, we assumed that Sr-HT-Gahnite alone can recruit host vein endothelial cells (VECs). In the absence of ASCs, it could promote angiogenesis and finally facilitate bone regeneration. Combined with ASCs, Sr-HT-Gahnite not only enhances the osteogenesis of implanted ASCs, but also could promote angiogenesis, thereby achieving optimal effects in the bone regeneration of calvarial defects.
In summary, being a strong, highly porous and biocompatible bio-ceramic, Sr-HT-Gahnite showed no adverse effect on cell viability. Sr-HT-Gahnite not only promoted osteogenic and angiogenic differentiation of ASCs, but also enhanced the proliferation, migration and expression of angiogenic factors by HUVECs. Moreover, in a rat critical-sized calvarial defect model, the combination of Sr-HT-Gahnite and ASCs enhanced both osteogenesis and angiogenesis in vivo. Our study suggests that through incorporation of Ca, Si, Sr, and Zn the Sr-HT-Gahnite scaffolds could act as cell carrier for ASCs for the construction of vascularized tissue-engineered bone.
Materials and Methods
Preparation of biomaterial dissolution products
Prior to prepare dissolution products, TCP/HA and Sr-HT-Gahnite agglomerates were ground and sieved to a median size (D50) of 2 micron. The dissolution products of TCP/HA and Sr-HT-Gahnite particles were prepared and sterilized. Two grams of each kind of particles was soaked in 10 mL osteogenic differentiation medium (growth medium supplemented with 50 mg/ml L-ascorbic acid, 10 mM glycerophosphate, and 100 nM dexamethasone)37. After 24 hours incubation, the resultant solution was obtained by centrifuging paritcles and media. The solution was sterilized through a 0.22 μm filter (Merck Millipore, Darmstadt, Germany) for the following experiments. The concentrations of Ca, Si, Sr, Zn and Al in TCP/HA and Sr-HT-Gahnite dissolution products were examined by inductively coupled plasma atomic emission spectroscopy (ICP-AES, IRIS 1000, Thermo Elimental).
Culture of ASCs on the different scaffolds
Accroding to previously published procedures23, ASCs were isolated from the inguinal fat pad of SD rats via 1 mg/mL collagenase digestion. The subcutaneous adipose tissue was minced, then washed with phosphate balanced solution (PBS) and digested at 37 °C while shaking at 80 rpm for 60 min.
The digested fat tissue was centrifuged at 1800 rpm for 10 min. Then, it was filtered through a 40 micron cell strainer to remove undigested tissue. Cells were resuspended in growth medium (Dulbecco’s Modified Eagle Media, DMEM) supplemented with 10% fetal bovine serum (FBS, Thermal Fisher Scientific, Waltham, USA). After 2 days’ culture, culture medium was changed to remove non-adherent cells. After the primary passage, cells were incubated in the osteogenic medium. Cell lines used for the following study were in passage 2 to 3.
Scaffolds were sterilized by autoclave prior to use in experiments. ASCs at a density of 2.0 × 105 cells per scaffold in 100 uL cell suspension were seeded on the scaffolds for cell morphology assay. After 24 hours of culture, they were fixed in 2.5% glutaraldehyde. The specimens were dehydrated in graded series of ethanol and dried in hexamethyldisilazane. Then, the scaffolds were sputter-coated with gold and examined by a Magellan 400 field-emission scanning electron microscope (FEI, Hillsboro, OR, USA).
ASCs were cultured on the two types of scaffolds placed in 24-well plates for up to 7 days. After 1, 4 and 7 days of culture, a MTT [3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide] assay was carried out to examine the total metabolic activity of cells. Briefly, specimens were washed with PBS three times, then, they were transferred to a new 24-well plate. 200 uL of culture medium supplemented with 20 uL 5 mg/mL of MTT solution was added to each targeted well. After incubation for a further 4 hours, the culture medium was carefully replaced with 200 uL of dimethyl sulfoxide (DMSO) and placed on a rotating tray for 15 min. Then, the supernatent was transferred to a 96-well plate. The absorbance was measured at 490 nm by use of ELX Ultra Microplate Reader (Bio-tek, Winooski, VT, USA).
ASCs differentiation on TCP/HA and Sr-HT Gahnite was assessed using a semi-quantitative analysis of alkaline phosphatase (ALP) activity. After 7 and 14 days of cells culture on the two types of the scaffolds, the samples were washed with PBS and incubated with p-nitrophenyl phosphate (Sigma) for 4 hours. The optical density values for absorbance at 405 nm (Bio-tek) were measured to determine ALP activity. The intracellular total protein content was measured by use of the microBCA protein assay kit (Thermo Fisher Scientific, Waltham, MA, USA) according to the manufacturer’s instructions. The ALP quantity analyses were normalized to the total protein content.
Effect of bio-ceramic dissolution products on ASCs
To investigate the total cell viability of ASCs in response to various concentrations of TCP/HA and Sr-HT Gahnite dissolution products, MTT assay was carried out. ASCs were incubated in 96-well plates in triplicate at a density of 4 × 103 cells per well for 4 hours. Then, the culture medium was removed and the osteogenic medium supplemented with various concentrations of the dissolution products was filled in. After incubation for an additional 1, 4 and 7 days, total cell metabolic activity was measured as described above in section “Metabolic activity”.
Alkaline phosphatase activity and calcium deposition assays were conducted to test the effects of different concentrations TCP/HA and Sr-HT Gahnite dissolution products on the osteogenic differentiation of ASCs. Cells were cultured in 24-well plates in osteogenic medium with dissolution products of TCP/HA and Sr-HT-Gahnite. ALP staining was performed by use of an ALP kit (Beyotime Biotechnology, Shanghai, People’s Republic of China) after 10 days of culture. ALP semi-quantitative analysis was performed at 7, 10 and 14 days. After 21 days of incubation, Alizarin Red S staining was conducted to observe calcium deposition. Briefly, cells were treated with 95% alcohol for fixation and washed with distrilled water. Cells were stained with 0.5% Alizarin Red S staining solution for mineralization examination. After washing several times with distilled water, specimens were observed. For the quantification analysis, the stained samples were desorbed using 10% cetylpyridinium chloride (Sigma). Absorbance values at 590 nm were recorded. Intracellular total protein content was determined by use of the microBCA protein assay kit (Thermo). ALP and calcium deposition quantity analyses were normalized to total protein content.
Angiogenic differentiation of ASCs was determined in cells cultured in the different extracts for 4 and 7 days. Total RNA was extracted by use of trizol reagent. Complementary DNA (cDNA) was synthesized by use of the primescriptTM RT reagent kit (Takara, Bio Inc, Otsu, Japan). Primers for the selected angiogenesis related genes, including VEGF-α, Hif-1α, and ANG-1 were the same as those described in previously studies38,39. Expressions of these genes were quantified by use of Real-time PCR with SYBR Premix Ex Taq II (Takara). The relative expression levels for each gene of interest were normalized to that of the housekeeping gene GAPDH.
Effect of different bio-ceramic dissolution products on in vitro angiogenesis of HUVECs
A moderate dilution ratio of 1/32 of dissolution products was applied to examine the stimulatory effect of different extracts of TCP/HA and Sr-HT-Gahnite on HUVECs proliferation. The HUVECs were cultured in 96-well plates at a density of 3 × 103 cells per well. After 24 hours of incubation, the culture medium was removed. The TCP/HA and Sr-HT-Gahnite dissolution products diluted with DMEM containing 10% FBS at different concentrations were added to target wells. Cells cultured with DMEM containing 10% FBS were used for the control group. At day 1, 4 and 7 of culture, the MTT assay was conducted by use of a standard procedure as described above in section “Metabolic activity”.
HUVECs were seeded into 12-well plates at a density of 4 × 104 cells per well. After the culture medium was replaced by the TCP/HA and Sr-HT-Gahnite dissolution products diluted with DMEM containing 10% FBS at different concentrations 1/8, 1/16 and 1/32, the cells were cultured for another 4 days for RNA extraction. Expression of angiogenesis related genes VEGF-α, HIF-1α, and ANG-1 were evaluated by use of Real-time PCR with SYBR Premix Ex Taq II (Takara). The relative expression levels for each gene of interest were normalized to that of the housekeeping gene GAPDH as described above.
To test the migratory ability of HUVECs treated with the Sr-HT Gahnite and TCP/HA dissolution products, transwell plates with a pore size of 8 μm (Millipore Inc, Billerica, MA) were used to perform transmigration assays. Firstly, cells were pre-cultured in dissolution products of either TCP/HA or Sr-HT-Gahnite at 1/32 dilution for 7 days followed by seeding 4 × 104 HUVECs cells in DMEM containing 10% FBS in the upper chamber40. The lower chamber was added with the dissolution products of either TCP/HA or Sr-HT-Gahnite at 1/32 dilution supplemented with 10% FBS. After 18 hours of incubation, the upper side of the membrane was carefully wiped with cotton swab to remove non-migrating cells.
Cells that had traversed the membrane were fixed and stained with 0.1% crystal violet. They were washed in PBS for several times and observed. The cells numbers in five random fields of each sample were counted.
In vivo implantation
For in vivo experiments, 12-week-old male SD rats were used in this study. All animals were obtained from the Ninth People’s Hospital Animal Center (Shanghai, China). The experimental protocol was approved by the Animal Care and Experimnt Committee of the Ninth People’s Hospital, and the methods were performed in accordance with the approved guidelines. A critical-sized calvarial defect model was performed according to our previous study41. The animals were anesthetized with intraperitoneal injection of pentobarbital (Nembutal 3.5 mg/100 g). Two circular 5-mm diameter calvarial defects were prepared by use of a trephine bur (ITI Dental Implant System; Straumann). A total of 32 defects from 16 SD rats were randomly filled with the following four groups: (A) TCP/HA only (n = 8); (B) Sr-HT-Gahnite only (n = 8); (C) TCP/HA and ASCs (n = 8); and (D) Sr-HT-Gahnite and ASCs (n = 8). The wound was closed in layers by use of 4–0 resorbable sutures.
Sequential fluorescent labeling
The new bone formation and mineralization were labeled by use of a polychrome sequential fluorescent labeling as previously described22,42. The animals were intraperitoneally injected with 30 mg/kg of alizarin red (AL, Sigma) and 20 mg/kg of calcein (CA, Sigma) at 4 and 6 weeks post-operation.
At 8 weeks after surgery, rats were euthanized and perfused with Microfil (Flowtech, USA) for the evaluation of blood vessel formation. A long incision was made from the front limbs down to the xyphoid process43. Then, one side of the sternum was cut with scissors, and the rib cage was retracted. After clamping the descending aorta, the left ventricle was penetrated with an angiocatheter. The inferior vena cava was incised and heparinized saline was perfused. Subsequently, 20 mL of Microfil was perfused.
The whole calvarial samples were dehydrated in an ascending series of alcohols and embedded in polymethylmethacrylate (PMMA). The specimens were sagittally cut into 150-mm-thick sections by use of a microtome (Leica TCS, Germany), ground and polished to a thickness of 40–50 μm. The samples were observed for fluorescent labeling by use of a confocal laser scanning microscope (CLSM, Leica TCS, Germany).The fluorochrome staining results was quantified by use of a personal computer-based image analysis system (Image-Pro Plus, Media Cybernetics, USA), as previously described44. The excitation/emission wavelengths used to visualize each of the fluorophores were 543/617 nm (AL, red) and 488/517 nm (CA, green). Red (AL), and green (CA) areas represent the new bone formation and mineralization at 4 and 6 weeks post operation, respectively. For histological observation, polished sections were stained with Van Gieson’s picro fuchsin. The area of new bone was expressed as the percentage of the newly formed bone area to the entire calvarial defect area. Moreover, each blue spot from the Microfil perfusion indicated a new blood vessel. The areas of new bone in the stained samples and the area of blue spots (vessel area) for each group were quantitatively evaluated using Image Pro 5.0.
Analysis for differences between TCP/HA group and Sr-HT-Gahnite group and among the various groups was performed by use of T-tests assuming equal variances and one-way analysis of variance with Student-Newman-Keuls post-hoc test based on the normal distribution. All statistical analyses were carried out by use of the SPSS 19.0 statistical software package. Results are presented as mean ± standard deviation. Differences were considered significant for P < 0.05 and P < 0.01.
How to cite this article: Wang, G. et al. Effects of Sr-HT-Gahnite on osteogenesis and angiogenesis by adipose derived stem cells for critical-sized calvarial defect repair. Sci. Rep. 7, 41135; doi: 10.1038/srep41135 (2017).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Zhi, W. et al. A novel porous bioceramics scaffold by accumulating hydroxyapatite spherulites for large bone tissue engineering in vivo. II. Construct large volume of bone grafts. J Biomed Mater Res A 102, 2491–501 (2014).
Saran, U., Gemini Piperni, S. & Chatterjee, S. Role of angiogenesis in bone repair. Archives of Biochemistry and Biophysics 561, 109–117 (2014).
Cao, L., Wang, J., Hou, J., Xing, W. & Liu, C. Vascularization and bone regeneration in a critical sized defect using 2-N, 6-O-sulfated chitosan nanoparticles incorporating BMP-2. Biomaterials 35, 684–698 (2014).
Zhang, H. X. et al. In vitro and in vivo evaluation of calcium phosphate composite scaffolds containing BMP-VEGF loaded PLGA microspheres for the treatment of avascular necrosis of the femoral head. Mater Sci Eng C Mater Biol Appl 60, 298–307 (2016).
Kim, B. S. et al. Angiogenin-loaded fibrin/bone powder composite scaffold for vascularized bone regeneration. Biomater Res 19, 18 (2015).
Curtin, C. M. et al. Combinatorial gene therapy accelerates bone regeneration: non-viral dual delivery of VEGF and BMP2 in a collagen-nanohydroxyapatite scaffold. Adv Healthc Mater 4, 223–7 (2015).
Kang, Y., Kim, S., Fahrenholtz, M., Khademhosseini, A. & Yang, Y. Osteogenic and angiogenic potentials of monocultured and co-cultured human-bone-marrow-derived mesenchymal stem cells and human-umbilical-vein endothelial cells on three-dimensional porous beta-tricalcium phosphate scaffold. Acta Biomater 9, 4906–15 (2013).
Keshaw, H., Forbes, A. & Day, R. M. Release of angiogenic growth factors from cells encapsulated in alginate beads with bioactive glass. Biomaterials 26, 4171–4179 (2005).
Leu, A. & Leach, J. K. Proangiogenic potential of a collagen/bioactive glass substrate. Pharm Res 25, 1222–9 (2008).
Shi, M. et al. Stimulation of osteogenesis and angiogenesis of hBMSCs by delivering Si ions and functional drug from mesoporous silica nanospheres. Acta Biomaterialia 21, 178–189 (2015).
Gerhardt, L.-C. et al. The pro-angiogenic properties of multi-functional bioactive glass composite scaffolds. Biomaterials 32, 4096–4108 (2011).
Xu, S. et al. Reconstruction of calvarial defect of rabbits using porous calcium silicate bioactive ceramics. Biomaterials 29, 2588–2596 (2008).
Wang, C., Lin, K., Chang, J. & Sun, J. Osteogenesis and angiogenesis induced by porous β-CaSiO3/PDLGA composite scaffold via activation of AMPK/ERK1/2 and PI3K/Akt pathways. Biomaterials 34, 64–77 (2013).
Day, R. M. Bioactive glass stimulates the secretion of angiogenic growth factors and angiogenesis in vitro . Tissue Eng 11, 768–77 (2005).
Zreiqat, H. et al. The incorporation of strontium and zinc into a calcium–silicon ceramic for bone tissue engineering. Biomaterials 31, 3175–3184 (2010).
Wu, C., Ramaswamy, Y., Kwik, D. & Zreiqat, H. The effect of strontium incorporation into CaSiO3 ceramics on their physical and biological properties. Biomaterials 28, 3171–81 (2007).
Zhang, W. et al. A strontium-incorporated nanoporous titanium implant surface for rapid osseointegration. Nanoscale 8, 5291–301 (2016).
Lin, K. et al. Enhanced osteoporotic bone regeneration by strontium-substituted calcium silicate bioactive ceramics. Biomaterials 34, 10028–10042 (2013).
Roohani-Esfahani, S. I. et al. Unique microstructural design of ceramic scaffolds for bone regeneration under load. Acta Biomaterialia 9, 7014–7024 (2013).
Roohani-Esfahani, S. I., Lu, Z. & Zreiqat, H. Novel, simple and reproducible method for preparation of composite hierarchal porous structure scaffolds. Materials Letters 65, 2578–2581 (2011).
Roohani-Esfahani, S. I., Newman, P. & Zreiqat, H. Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects. Sci Rep 6, 19468 (2016).
Zhang, W. et al. Comparison of the use of adipose tissue-derived and bone marrow-derived stem cells for rapid bone regeneration. J Dent Res 92, 1136–41 (2013).
Jin, Y. et al. rhPDGF-BB via ERK pathway osteogenesis and adipogenesis balancing in ADSCs for critical-sized calvarial defect repair. Biomed Res Int 20, 3303–13 (2014).
Murohara, T., Shintani, S. & Kondo, K. Autologous adipose-derived regenerative cells for therapeutic angiogenesis. Curr Pharm Des 15, 2784–90 (2009).
Merfeld-Clauss, S., Gollahalli, N., March, K. L. & Traktuev, D. O. Adipose tissue progenitor cells directly interact with endothelial cells to induce vascular network formation. Tissue Eng Part A 16, 2953–66 (2010).
Rohringer, S. et al. Mechanisms of vasculogenesis in 3D fibrin matrices mediated by the interaction of adipose-derived stem cells and endothelial cells. Angiogenesis 17, 921–33 (2014).
Rehman, J. Secretion of angiogenic and antiapoptotic factors by human adipose stromal cells. 109, 1292–8 (2004).
Nakagami, H. et al. Novel autologous cell therapy in ischemic limb disease through growth factor secretion by cultured adipose tissue-derived stromal cells. Arterioscler Thromb Vasc Biol 25, 2542–7 (2005).
Fielding, G. & Bose, S. SiO2 and ZnO dopants in three-dimensionally printed tricalcium phosphate bone tissue engineering scaffolds enhance osteogenesis and angiogenesis in vivo . Acta Biomater 9, 9137–48 (2013).
Zhu, Y., Zhu, M., He, X., Zhang, J. & Tao, C. Substitutions of strontium in mesoporous calcium silicate and their physicochemical and biological properties. Acta Biomaterialia 9, 6723–6731 (2013).
Overman, J. R. et al. Growth factor gene expression profiles of bone morphogenetic protein-2-treated human adipose stem cells seeded on calcium phosphate scaffolds in vitro . Biochimie 95, 2304–2313 (2013).
Buschmann, J. et al. Tissue engineered bone grafts based on biomimetic nanocomposite PLGA/amorphous calcium phosphate scaffold and human adipose-derived stem cells. Injury 43, 1689–1697 (2012).
Nardone, V. et al. In Vitro Effects of Strontium on Proliferation and Osteoinduction of Human Preadipocytes. Stem Cells Int 2015, 871863 (2015).
Nardone, V. et al. Osteodifferentiation of human preadipocytes induced by strontium released from hydrogels. Int J Biomater 2012, 865291 (2012).
Wu, L. et al. Osteogenic differentiation of adipose derived stem cells promoted by overexpression of osterix. Mol Cell Biochem 301, 83–92 (2007).
Roohani-Esfahani, S.-I., Nouri-Khorasani, S., Lu, Z., Appleyard, R. & Zreiqat, H. The influence hydroxyapatite nanoparticle shape and size on the properties of biphasic calcium phosphate scaffolds coated with hydroxyapatite–PCL composites. Biomaterials 31, 5498–5509 (2010).
Zeng, D. et al. Maxillary sinus floor elevation using a tissue-engineered bone with calcium-magnesium phosphate cement and bone marrow stromal cells in rabbits. Tissue Eng Part A 18, 870–81 (2012).
W, Q. et al. Antibacterial property, angiogenic and osteogenic activity of Cu-incorporated TiO2 coating. Journal of Materials Chemistry B 2, 6738–6748 (2014).
Zhou, Y. et al. The Effect of Quercetin on the Osteogenesic Differentiation and Angiogenic Factor Expression of Bone Marrow-Derived Mesenchymal Stem Cells. PLoS One 10, e0129605 (2015).
Park, Y. J. et al. Effect of nicotine on human umbilical vein endothelial cells (HUVECs) migration and angiogenesis. Vascular Pharmacology 49, 32–36 (2008).
Kim, K. I., Park, S. & Im, G. I. Osteogenic differentiation and angiogenesis with cocultured adipose-derived stromal cells and bone marrow stromal cells. Biomaterials 35, 4792–804 (2014).
Zhang, W. et al. The use of injectable sonication-induced silk hydrogel for VEGF(165) and BMP-2 delivery for elevation of the maxillary sinus floor. Biomaterials 32, 9415–24 (2011).
Xia, L. et al. Effect of nano-structured bioceramic surface on osteogenic differentiation of adipose derived stem cells. Biomaterials 35, 8514–27 (2014).
Xia, L. et al. Enhanced osteogenesis through nano-structured surface design of macroporous hydroxyapatite bioceramic scaffolds via activation of ERK and p38 MAPK signaling pathways. Journal Of Materials Chemistry B 1, 5403–5416 (2013).
This work was jointly supported by the National Key Research and Development Program of China (2016YFC1102900), Outstanding academic leaders of Shanghai, China (15XD1502500), Key Program of National Natural Science Foundation of China (81430012) and the Shanghai Summit & Plateau Disciplines. We acknowledge the assistance in manuscript preparation provided by A/Prof Colin R Dunstan. The authors acknowledge the Australia National Health and Medical Research Council, Australian Research Council, and the Rebecca Cooper Foundation.
The authors declare no competing financial interests.
About this article
Cite this article
Wang, G., Roohani-Esfahani, SI., Zhang, W. et al. Effects of Sr-HT-Gahnite on osteogenesis and angiogenesis by adipose derived stem cells for critical-sized calvarial defect repair. Sci Rep 7, 41135 (2017). https://doi.org/10.1038/srep41135
This article is cited by
Combined Biomaterials: Amniotic Membrane and Adipose Tissue to Restore Injured Bone as Promoter of Calcification in Bone Regeneration: Preclinical Model
Calcified Tissue International (2021)
Bone union formation in the rat mandibular symphysis using hydroxyapatite with or without simvastatin: effects on healthy, diabetic, and osteoporotic rats
Clinical Oral Investigations (2020)
Low-dose strontium stimulates osteogenesis but high-dose doses cause apoptosis in human adipose-derived stem cells via regulation of the ERK1/2 signaling pathway
Stem Cell Research & Therapy (2017)
Bone Research (2017)