Abstract
Feature selection methods usually select the most compact and relevant set of features based on their contribution to a linear regression model. Thus, these features might not be the best for a nonlinear classifier. This is especially crucial for the tasks, in which the performance is heavily dependent on the feature selection techniques, like the diagnosis of neurodegenerative diseases. Parkinson’s disease (PD) is one of the most common neurodegenerative disorders, which progresses slowly while affects the quality of life dramatically. In this paper, we use the data acquired from multimodal neuroimaging data to diagnose PD by investigating the brain regions, known to be affected at the early stages. We propose a joint kernelbased feature selection and classification framework. Unlike conventional feature selection techniques that select features based on their performance in the original input feature space, we select features that best benefit the classification scheme in the kernel space. We further propose kernel functions, specifically designed for our nonnegative feature types. We use MRI and SPECT data of 538 subjects from the PPMI database, and obtain a diagnosis accuracy of 97.5%, which outperforms all baseline and stateoftheart methods.
Similar content being viewed by others
Introduction
Diagnosis of neurodegenerative diseases based on neuroimaging data has remarkably improved patient treatment strategies. However, early diagnosis is a very challenging task, due to various sources of inter and intrasubject variabilities, within and between different groups, as well as the induced deviations due to image acquisition and preprocessing procedures. In addition, the need for the identification of biomarkers for the disease further intensifies these challenges. Imaging biomarkers are essentially a set of imagebased features, and therefore, feature selection techniques are heavily researched (e.g., refs 1 and 2) and have yielded eminent achievements.
Many previous works in the literature have investigated both linear and nonlinear classification models for the task of disease diagnosis using neuroimaging data^{1,3,4}. One of the closures in almost all these works is that linear and nonlinear models both obtain similar performances for disease diagnosis based on neuroimaging data. However, a very crucial step in these works is the feature selection procedure, which is often overlooked. Current methods use either unsupervised (e.g., Fisher score^{5}) or supervised feature selection (e.g., sparse feature selection^{6}, or minimumredundancy maximumrelevancy^{7}) techniques. When a linear feature selection technique is used, the selected features would be most correlated linearly with the class labels (maximum relevance), while being least correlated with each other (minimum redundancy), in the input feature space. Nonetheless, this linearly selected feature set would not be the best for a nonlinear classifier, which would map the input feature space to a higher dimensional space (denoted as kernel space). Accordingly, for the case of nonlinear classification, it would be better to select the features that result in the best performance in the nonlinear kernel space, rather than the original input feature space, illustrated in Fig. 1.
On the other hand, the choice of the mapping function to project the input feature space to a higher dimensional space is itself challenging, and dependent on the application and its associated data types. These nonlinear projections are often modeled using kernel functions^{8}. In this paper, we propose a new strategy to select the features that can best construct a classifier in the kernel space, as opposed to the conventional methods that select features only in the original input feature space. In this way, if we use a nonlinear kernel, the selected features work best in the nonlinear kernel space, or if a linear kernel is used, those features will be best for a linear classifier. To take advantage of more kernel types, we define a new kernel which interweaves different linear and nonlinear kernels, so that takes advantage of both types of models. We apply our method to the problem of PD diagnosis using the Parkinson’s Progression Markers Initiative (PPMI) database^{9}, available at http://www.ppmiinfo.org/data. We use densities in RegionsofInterest (ROIs) as features from Magnetic Resonance Imaging (MRI) and SinglePhoton Emission Computed Tomography (SPECT) modalities. These features are volumetric nonnegative values, and therefore we incorporate such information in our proposed kernel function.
It is important to note that, based on various studies in the literature^{10,11}, usually nonlinear classifiers can be better fit, if the data spans in a lowerdimensional space. Feature selection methods are often used in many neuroimaging applications^{12,13,14}, leading to a limited number of selected features, and therefore we are dealing with a lowdimensional space for the classification task. This observation motivates us to specifically investigate nonlinear models for classifying these data. But as mentioned above, in this paper we argue that if one chooses a nonlinear classifier, the feature selector should be designed accordingly, and hence, we develop a joint model. However, it is not appropriate to assume that a nonlinear model is always better than a linear model (or the native feature space). As a result, we formulate the framework such that both linear and nonlinear kernels can be utilized and the model selects which operates best on the specific dataset.
Note that current practical diagnosis of PD mainly depends on the clinical symptoms. Clinically, PD is characterized by tremor at rest, rigidity, akinesia (or bradykinesia), postural instability, flexed posture and freezing (motor blocks) including also nonmotor symptoms such as cognitive and psychiatric impairment^{15}. PD symptoms start to appear with the loss of neurotransmitters in the brain, particularly dopamine. As discussed in the literature^{16,17,18,19,20}, neuroimaging techniques can be successfully utilized for early diagnosis of PD. For instance, SPECT imaging is usually considered for the diagnosis of PD^{18,19}, and MRI is often employed for the differential diagnosis of PD syndromes^{19,21,22}, as well as the analysis of the structural changes in PD patients^{16,23,24}. Recently, many researchers started using machine learning and datadriven analysis methodologies for disease diagnosis purposes, and significant amount of research efforts have been dedicated to diagnosis and progression prediction of neurodegenerative diseases using different brain imaging modalities^{3,18,19,22,25}. Automatic PD diagnosis and progression prediction could help physicians and patients avoid unnecessary medical examinations or therapies, as well as potential side effects and safety risks^{26}. Machine learning and pattern recognition methods could simplify the development of these automatic PD diagnosis approaches. For instance, Prashanth et al.^{18} use intensity features extracted from SPECT images along with a SVM classifier, while Focke et al.^{23} use the voxelbased morphometry (VBM) on T1weighted MRI with a SVM classifier to identify idiopathic Parkinson syndrome patients. In another work, Salvatore et al.^{24} propose a method based on principal component analysis (PCA) on morphological T1weighted MRI, in combination with SVMs for diagnosis of PD and its syndromes.
Accordingly, the contributions of this paper are multifold: (1) Our proposed method selects the features that best classify the data in the kernel space, through learning multiple kernels; (2) We design kernel functions specific to our feature types (volumetric nonnegative features); (3) We use multimodal MRI and SPECT data and propose a nonlinear feature fusion strategy to diagnose PD.
PD Staging, Data Acquisition and Preprocessing
The data used in this paper are acquired from the PPMI database^{9}, which is the first substantial study for identifying the PD progression biomarkers. In this research, we use the subjects with both MRI and SPECT modalities available in the database, resulting in 369 PD and 169 Normal Control (NC) subjects. PD subjects in the PPMI study are de novo PD patients, newly diagnosed and unmedicated. The healthy/normal control subjects are both age and gendermatched with the PD patients. The demographic information of the subjects is illustrated in Table 1.
PD subjects are often evaluated using the widely used Hoehn and Yahr (H&Y) scale^{27} to understand their stagings. H&Y scale defines board categories, which rate the motor function for PD patients. H&Y stages correlate with several factors including motor decline, neuroimaging studies of dopaminergic loss and deterioration in quality of life^{28}. It has a 5point scale (Stages 1–5) measurement. Most of the studies in PD evaluated disease progression through analyzing patients and the time taken for them to reach one of the H&Y stages. The subjects in the first stage have unilateral involvement only, often with the least or no functional impairment. They have mild symptoms, which are inconvenient but not disabling. The second stage has bilateral or midline involvements, but still with no impairment of balance. For these subjects, the posture and gait are usually affected. Stage three shows the first signs of impaired reflexes. The patient will show significant slowing of the body movements and moderately severe dysfunction. In the fourth stage, the disease is fully developed and is severely disabling; the patient can still walk but to a limited extent, and might not be able to live alone any longer. In the fifth (final) stage, the patient will have a confinement to bed or will be bound to a wheelchair. The PD subjects in this study are mostly in the first two H&Y stages. As reported by the studies (http://www.ppmiinfo.org/wpcontent/uploads/2013/09/PPMIWWADNI.pdf) in PPMI^{9}, among the PD patients at the time of their baseline image acquisition, 43% of the subjects were in stage 1, 56% in stage 2 and the rest in stages 3 to 5.
Previous clinical studies (e.g., the Braak staging scheme^{29,30}) show that the disease is initiated in brainstem, midbrain and subcortical regions; and, over time, it propagates to many other brain regions. Thus, in order to diagnose PD and identify its imaging biomarkers in its early stage, we focus on the structures in the brainstem and basal ganglia areas, along with the regions in the subcortical regions. Based on^{29}, we employ the 36 ROIs depicted in Fig. 2a, which correspond to brainstem (4 ROIs), substantia nigra and red nucleus (4 ROIs), limbic lobe (16 ROIs), insula (2 ROIs) and subcortical regions (10 ROIs). We extract features specifically from these ROIs, since we stress that we would like to investigate diagnosis of de novo PD subjects. Including all ROIs in the brain would jeopardize the motivation of early diagnosis, since other ROIs are previously investigated and are found not clinically relevant to PD or get affected by PD at very late stages^{29,30,31}.
For each subject, a 3D MPRAGE sequence was performed, using 3T SIEMENS MAGNETOM TrioTim syngo scanners. T1weighted images were acquired for 176 sagittal slices with the following parameters: repetition time = 2300 ms, echo time = 2.98 ms, flip angle = 9°, and voxel size = 1 × 1 × 1 mm^{3}. The MR images are preprocessed by skull stripping, and then segmented into White Matter (WM), Gray Matter (GM), and CerebroSpinal Fluid (CSF) tissues, using technique in ref. 32. Then, the Anatomical Automatic Labeling (AAL) atlas with the above 36 labeled ROIs is registered to each subject’s native space. Specifically, we used FLIRT from FSL package^{33} for affine alignment, followed by HAMMER^{34} for nonlinear registration. The AAL atlas is warped according to the estimated deformation fields to the subject and then the ROI labels are propagated onto the subject’s native space. Finally, WM and GM tissue volumes in each ROI are calculated as MRI features.
On the other hand, SPECT images are primarily used for PD diagnosis and analysis. These images are used to register the dopamine transporter levels in the striatum, commonly known as DaTSCAN. To acquire this image, the _{123}Iioflupane neuroimaging radiopharmaceutical biomarker is injected, which binds to the dopamine transporters in the striatum. Brain images are then acquired. To process these images, the PPMI study (DatScan SPECT Image Processing Methods for Calculation of Striatal Binding Ratio, August 2013) has performed attenuation correction on the SPECT images, along with a standard 3D 6.0 mm Gaussian filter. Then, the images were normalized to standard Montreal Neurological Institute (MNI) space. Next, the transaxial slice with the highest striatal uptake was identified and the 8 hottest striatal slices around it were averaged, to generate a single slice image. On this average slice, the four caudate and putamen (left and right) ROIs, which are in the striatum brain region, are labeled and considered as target ROIs. The occipital cortex region is also segmented and used as a reference ROI. Count densities for the regions were used to calculate the striatal binding ratios (SBRs), as
As can be seen in Fig. 2c, the caudate and putamen intensity values differ significantly between the PD and NC subjects.
Notations
Throughout the paper, bold capital letters denote matrices (e.g., A). Small bold letters are vectors (e.g., a). All nonbold letters denote scalars or functions. is the scalar in the row i and column j of A, while a^{i} and a_{j} denote the i^{th} row and the j^{th} column of A, respectively. and represent and norms of a, respectively.
Kernelbased Feature Selection and MaxMargin Classification
Feature or variable selection is defined as the process of picking a subset of discriminative features to best construct a model, namely for classification or regression. Feature selection approaches can be mainly categorized into two types: unsupervised and supervised. The former selects features without considering the class labels, while the latter aims to select features with the maximum relevance to the class labels and the least amount of redundancy in the selected features. Among the supervised feature selection methods, sparse feature selection^{6} has gained much attention in recent years, due to its simplicity and superior performance.
Suppose we have N training samples, with d features for each. We can arrange the feature vectors in a matrix , and their respective labels in . Sparse feature selection aims at minimizing the objective:
to best get a representation of the samples using the weight vector . This weight vector is constrained with an norm to get a compact set of discriminative features. Obviously, the set of selected features under this setting would be appropriate if we are planning to build a linear classification model (e.g., linear SVM). This is because these features are selected to minimize redundancy and maximize relevance to the class labels in the original feature space. However, for a nonlinear classification task, we should select the features that replicate the same minimumredundancy and maximumrelevance in the kernel space.
Nonlinear classification is usually achieved by first projecting the original feature vectors to a highdimensional space using a nonlinear mapping function (referred to as ), and then performing classification in the kernel space. However, instead of explicitly defining a mapping function, often a kernel function is used, which defines the similarity between the samples (or the feature vectors)^{8}. This is simply because many machine learning algorithms (e.g., SVMs) can be entirely expressed in terms of dot products^{8}, and, under some conditions, kernel functions can also be expressed as dot products in a (possibly infinite dimensional) feature space.
Here, in order to both select features and classify the data, we adopt a formulation similar to kernelbased SVM, with a customized kernel to account for feature selection. We propose to apply the kernel function on each single feature and define the aggregatekernel through a simple weighted sum of all these kernels. In this way, we can select the features that contribute most to constructing a better classification model through regularization on the kernels’ weight vector.
Formulation
The original kernelbased SVM formulation finds a maxmargin decision boundary in the kernel space,, using a loss function, L, with a tradeoff hyperparameter C, as:
where f is associated with a Reproducing Kernel Hilbert Space , and x_{j} and y_{j} are the j^{th} sample and its corresponding label, respectively. In terms of a nonlinear mapping function, f is defined as . As discussed earlier, we do not directly use the mapping function, . To this end, the representer’s theorem^{35} is incorporated, which states that the solution for w can always be represented as a linear combination of the training data. Therefore:
Hence, the optimization problem for the SVM would reduce to solving for β_{j}, .
Here, we would further like to select the features that can best construct the nonlinear SVM model. Accordingly, we construct a single kernel for each feature, and then aggregate all these kernels through a weighted average. Therefore, the kernel between two samples x_{j} and x would be calculated as:
This is similar to multiple kernel learning frameworks^{36,37}, while building each kernel only on a single feature. Applying the newlyintroduced kernel k on all training samples, we would have K = k(X, X). Figure 3 shows the proposed process of building the kernel matrix over all samples (3b), in comparisons with the conventional kernel building (3a). Now, by regularizing the weight vector α , we can enforce the selection of most discriminative features projected in the kernel space. Therefore, the objective function would be formed as:
However, we know that usually different features and kernels characterize different aspects of the data. Therefore, we propose to use different kernel types on all features, and let our method choose which kernel type and which feature would best build the classification model. Accordingly, if we define κ different types of kernels, we define a combination of different kernels for the d features, as:
In this way, would be defined as the concatenation of all . Note that b = d × κ. Since, there is a regularization on this vector, we can include different kernel types and determine which kernel contributes more in classifying the data, based on the selected feature(s).
Optimization
To solve the optimization problem in (6), we only need to make sure the loss function is differentiable. We can, then, easily decompose the problem into two convex subproblems, and solve using a gradient decent method. The first subproblem would consist of solving for f, in which we assume α is fixed. This reduces to a simple SVM optimization with the kernel characterized by the fixed α :
Then with f fixed, we can determine the best values for α through solving the second subproblem:
The only nonsmooth term is the last one. However, since we need to enforce the constraint α ≥ 0, we use a projection operator at each iteration. This constraint ensures that the last term is also differentiable with respect to α . Therefore, this objective can be simply optimized using projected gradient decent^{38}. To guarantee the convergence of the algorithm, based on^{36,39}, we choose the gradient step size according to the Armijo rule^{40}. As a result, the optimization process would alternate between the above two subproblems until convergence. The second subproblem learns the kernel, embedded in f(x_{j}), through optimizing the weights α , while the first one uses any SVM solver of choice to learn the SVM function.
Algorithm 1 summarizes the whole process and includes the stopping criteria. It is important to note that the main objective function (as in (6)) is a convex function, and therefore has a global optimum. The above two steps through the projected gradient decent will be repeated until convergence to the global optimum. It is shown that, under such settings with a convex objective function, the projected gradient decent converges to the global optimum^{38}.
Note that our proposed framework for joint feature selection and classification integrates the regularization on the maxmargin classifier (i.e., SVM), as in (6). Since the optimization process, as described above, consists of two phases of optimization, the same idea can be applied to other kernel methods, by using our customized kernel and incorporating the regularization to their formulations.
Kernel Function
The choice of kernel functions is very important, dependent on the application and the data types associated with the specific application of interest. Kernels are basically a measure of similarity between the samples. One of the most popular kernels is the Radial Basis Function (RBF) or the Gaussian kernel, formulated as:
where D(.,.) is a distance measure between two samples and σ is the kernel hyperparameter. Usually a squared Euclidean norm is used as the distance measure between two samples:
However, this distance metric should be adopted based on the characteristics of the data.
As described earlier, in this work, we use the volume of ROIs from MRI and SPECT images and therefore our features are all nonnegative. Hence, our feature vectors are similar to histogram features or probability distribution functions (PDF), if normalized. Many previous works usually normalize the data using zscores, which converts the feature values to a common scale with a mean of 0 and standard deviation of 1. However, this basically changes both the characteristics and the physical meanings of the features. But here, we normalize the feature vectors to the range [0, 1], making them similar to PDFs or the histogramlike features, used widely in computer vision applications. There are a number of other distance metrics used for nonnegative or histogramlike features^{41}. One of such distances is the χ^{2} distance:
Another popular distance used for such purposes in the computer vision area is the Earth Mover’s Distance (EMD)^{42}, which evaluates the dissimilarity between two multidimensional distributions in the feature space. Intuitively, given two distributions, we can consider one as a mass of earth spread in space, and the other as a collection of holes in that same space. EMD would measure the least amount of movements required to fill the holes with earth. For 1dimensional case, such as the case for our application, EMD has a simple closedform solution:
where cdf(⋅) is the cumulative distribution function and · is the absolute value function.
One of the popular kernels used for histogramlike features is the intersection kernel (histogram intersection kernel or HIK), which captures the similarities of the histogramlike features with the following definition:
Since, dependent on the data distribution, some datasets might perform better using linear kernels (i.e., in the native feature space), we also define the linear kernel function as:
To find the best kernel, which can be different for each single dataset, we use all these kernel definitions and define our kernel formulation through Equation (7), by summing over all kernel types (, ), for each single feature (, ). The set of all kernels could therefore be defined as the Linear kernel, the RBF kernel with different distance metrics, and the Intersection kernel as
with κ = 5 different kernel types. Our optimization framework, through optimizing for α, will select which feature(s) and kernel type(s) are best for the problem with the available dataset. We will examine this proposed kernel and compare the results with different settings of the kernels and hyperparameters.
Experimental Results
In this section, we conduct several experiments on synthetic and real PD diagnosis datasets. For evaluations, we compare our results with several baseline methods. Baseline classifiers under comparison include support vector machine (SVM), SparseSVM^{43}, sparse feature selection followed by a SVM (SFS + SVM) and a multiple kernel learning (MKL) framework for SVM^{37}, in which one kernel is learned for each modality and feature type (GM, WM and SBR, as described in Section) and classification is learned over these kernels. To further evaluate the effect of the feature selection ( regularization), we run the same objective in (6) with conventional regularization on the vector α, denoted as ‘Proposed reg’. In addition, we also employ the following widely used linear and nonlinear feature selection strategies followed by a SVM, and report the result: ttest^{44}, elasticnet^{45}, AutoEncoderRestricted Boltzmann Machine (AERBM)^{46}, and the mutual information based feature selector minimumredundancy maximumrelevancy (mRMR)^{7}. For all the experiments the hyperparameters are fixed, reported in the following. This avoids the excessive hyperparameter overturning procedures, and makes the results easily reproducible. All results are generated through 10fold crossvalidation, and we found that fixing λ = 1 generates the best results, while the best values for other hyperparameters are σ = 0.5 and C = 10.
Synthetic Data
To verify the proposed method and analyze its performance, we generate two sets of synthetic data, one linearly separable and the other one not separable linearly (hence we believe it would be best classified nonlinearly). For both cases, the data comprise two classes of 100 samples each, and feature vectors of the dimensionality 50. The linearly separable data are sampled from two separate randomly generated subspaces. For the linearly separable experiment, we first construct two independent subspaces with the dimensionality of 50, similar to refs 2,47. These two subspaces are constructed with bases (a random orthogonal matrix), and , where T is a random rotation matrix. We then sample 50 vectors from each subspace through , , with Q_{i}, a 50 × 100 matrix, being independent and identically distributed (i.i.d.) from . This leads to a binary classification problem. The two classes would correspond to the above two subspaces. For the nonlinearly separable data, we sample data for the two classes from two spheres in the 50dimensional space, but with different radiuses. To this end, the first class data are sampled i.i.d from a sphere with the radius of 0.5. For the second class, we construct another sphere with a radius of 1.0 with the same center as the first sphere. Then, the data points of the second class are sampled i.i.d from the space comprised by the difference of the two spheres.
To sketch the data we generated for this experiments and to be able to visualize them, we employ a dimensionality reduction technique to facilitate the visualization of the data points. We project the samples from the two datasets into the 2D space using tSNE^{48}. The tSNE projection technique visualizes highdimensional data by giving each sample a location in a two dimensional map. The map created by the tSNE reveals the neighborhood structure of the sample manifold at many different scales^{48}. Figure 4 shows the 2D tSNE projection of the generated data. As can be seen, the first set of data (4(a)) can be likely separated linearly, while the second one (4(b)) is not separable linearly, and we would expect to see better results using the nonlinear kernels.
Each of the features for the two linear and nonlinear experiments are normalized to the range [0, 1], similar to the data we have, since our features from the neuroimaging data are volumetric and nonnegative. The proposed method is run on these two sets of data, separately. The weight vector α , which is defined in (7) and optimized in (6), will contain the weight for each feature () for all different κ kernel types (). The mean weight for the features, across each kernel, would be a good indication of how the useful kernels for the task of classification were selected. These mean values are included in Table 2. Since we have imposed a regularization on the weights vector, it will sparsely select a compact set of features and kernels. Therefore, features with the lessuseful or redundant kernels are often all given zero weights. As can be seen, for the linearly separable data (Fig. 4(a)), the linear and histogram intersection kernels are selected, while for the nonlinear data, the RBF kernel with different distance metrics are selected along with the HIK. One of the main conclusions here could be that HIK is almost equally very important for both linear and nonlinear volumetric data. We will verify this on the real neuroimaging dataset, in the following subsections. HIK kernel has also been found to very useful in the computer vision area, in which the features are nonnegative and histogramlike. This type of kernel can model nonlinear relations, while being also able to model piecewise linear problems^{49}. This is the reason it is found very useful for both linear and nonlinear problems.
It is noteworthy to mention that our method can work equally the same for any type linearly or nonlinearly separable data. In this case, the method for both experiments, generates a 100% accuracy, while based on the characteristics of the data, different kernel types are selected.
PD Diagnosis
As described before, we use both MRI and SPECT modalities of total 538 subjects (169 NC, 369 PD) from the PPMI database to evaluate the proposed method. Table 3 compares the diagnosis accuracies of the proposed and baseline methods, analyzing the effects of different modalities. As it is obvious, the proposed method generates the best results when using both MRI and SPECT modalities. Additionally, Table 4 shows the results of the proposed and the baseline kernel methods with different kernel settings using the MRI + SPECT modalities. The proposed kernel, which combines all kernel types provides the best results compared to the other five kernels. Our method (Proposed reg and reg) is the only method that can interweave all kernels and concurrently select the best kernel and feature combination. Other kernel methods (MKL, SFS + SVM and SVM, as listed in the Table) can only operate on a single kernel and hence would only be able to interpret the data from a single aspect (e.g., linearity or nonlinearity).
In addition, Fig. 5 compares the sensitivity, specificity and the area under ROC curve for the methods. As can be seen, the proposed framework using the proposed interweaved kernel on the combination of SPECT and MRI data achieves the best results with an accuracy of 97.5%. This suggests that the best features are selected in the nonlinear kernel space, compared to the results of other methods, specifically SFS + SVM with an accuracy of 90.8%, in which a sparse feature selection is conducted in the original feature space followed by a nonlinear classifier. This supports our assumption that, if a nonlinear classification is intended, we should select those features that form the best classifier in the kernel space, not in the original feature space. Furthermore, our proposed kernel achieves an improved accuracy of over 1.4% than the case of squared Euclidean distance, which is widely used in many previous studies. On the other hand, comparison of the results from and regularization of the kernel weights vector indicates that the proposed method ( regularized) achieves an accuracy (and AUC) superior to the same formulation but with regularization. This is because regularization is suitable for recovering sparse signals, and can certainly reduce overfitting and increase generalization capability, thus achieving better performance on the unseen testing data. is preferable for data that is not sparse, while our features are extracted from brain ROIs. enforces selecting most discriminant ROIs. To further evaluate the feature selection performance, we conducted experiments with several stateoftheart linear and nonlinear feature selection or reduction and classification techniques used for such neurodegenerative diagnosis applications, which are already included in Table 3.
To analyze the effect of the proposed kernel and the contribution of each single kernel in building the final maxmargin classification model, we calculate the mean weight (in vector α ) of the features for each single kernel. Therefore, for the m^{th} kernel this mean weight would be calculated as
This measure can simply show how often features calculated using that kernel are selected and therefore would indicate the importance and significance of that kernel type. Figure 6 shows these mean weight values. As can be seen, again the intersection kernel (HIK) has the largest weight while the other two variations of RBF kernel (i.e., with EMD and Euclidian distance) are getting less weights, but still important. The other two kernels, linear and RBF with the χ^{2} distance, however, are not showing any useful for the task at hand. This is aligned with the nonlinear synthetic experiment and shows that if the features selected according to the classifier the performance could be boosted. To analyze the hyperparameter, λ in the objective function (6), we plot the accuracy and the area under the ROC curve as a function of λ in Fig. 7. This hyperparameter is a tradeoff to control how compact we want the selected feature set to be. As it is clear in this figure, the whole process is not hugely dependent to the setting of this hyperparameter and performs similarly well in a wide range of its settings.
One the major advantages of the proposed technique is that we can analyze the weight vector α and see features corresponding to which ROI are given nonzero mean weights over the 10 folds of the crossvalidation. In this way, we can draw a conclusion on the importance of any single ROI for the specific disease. The selected ROIs by the proposed method are visualized in Fig. 8, and Table 5 depicts the specific ROIs and tissue types or modalities that were selected. The last row of this table shows the mean values for the coefficient vector α for that specific modality (feature type), which indicates the level of significance and contribution of specific feature types in building the kernelbased maxmargin classifier. The SPECT features are the most useful features as they are quite discriminative for the task of PD diagnosis. This is also easily inferred by comparing the two subject samples in Fig. 2c. Among the MRI features, WM volumes are more compelling, since the deep brain regions contain more WM volumes and fibers. The selected ROIs are also aligned with the previous studies^{2,20,29,30,50}. Specifically, the Putamen and Caudate regions, along with the brainstem and many subcortical regions have always been studied and found important to assess PD development measures.
To analyze the convergence behavior of the proposed method, we plot the magnitude of the objective function in (6) for each of the 10 folds in the experiment on PPMI using both MRI and SPECT modalities, as a function of the number of iterations required for solving the alternating optimization problem. The plots are illustrated in Fig. 9. As can be seen, the algorithm converges in a limited number of iterations for all data splits.
To analyze the significance of the obtained results, we conduct a permutation test^{51}, which does not assume any data distribution and is also nonparametric. Permutation test investigates whether the classifier has found any class structure, or the observed accuracy was obtained by coincidence. To this end, the classification scheme is repeated by randomly permuting the class labels for π different times (π = 100, in our experiments). Then, a pvalue can be calculated, which would show the portion of the runs for which the misclassification rate is better than the original classification error. For our case, we obtained a pvalue less than 0.01, which signifies that the classification error on the original data is indeed substantially small and the classifier is not generating those results by chance^{51}. Furthermore, we use a bootstrapping procedure to statistically validate the performance of the proposed method. In this way, we can alternatively show that the obtained results are not due to any overfitting. But we only have one dataset. As a result, when we compute a statistic on the data (i.e., classification accuracy for our case), we cannot see how variable that statistic is. Accordingly, we create a large number of datasets, through bootstrapping, by subsampling from the original dataset. This leads to a distribution for the accuracy, so we can compare the methods statistically. To this end, we resample subjects with replacement from the dataset. Then, we use 90% of these subjects to train the classifier, which is then used to classify the remaining 10% of the subjects. This procedure is repeated different times, leading to different accuracy results. For our case, we set and . Since the subjects are sampled with replacement, the trials are independent and identically distributed (i.i.d.). Therefore, we can compare the methods using their trial bootstrap performances. Figure 10 shows the histograms of the trials for our proposed method (with regularization) and the baseline MKL method. With all the trials, our proposed method and the baseline MKL method achieved the mean and standard deviation of 95.5% ± 1.1 and 93.0 ± 2.2, respectively. As can be seen, our proposed method has a better mean accuracy with a tighter bound for the standard deviation, compared to the baseline MKL method.
In addition, we compare our proposed method against several previously published stateoftheart methods for the same purpose (PD diagnosis). The comparisons are provided in Table 6. The table includes all the information about the dataset and the methods they used for obtaining those results. As can be seen, our results are superior to all previous works, while we evaluated our method on a large dataset. One important note here could be that MRI data are much less dependable for the diagnosis task. This can be why when a small dataset is utilized, the solutions are quite prone to overfitting and relatively reasonable results could be achieved. On the other hand, when using large sets of data, the results for the diagnosis using only MRI degrades. Furthermore, the comparisons with the work of Prashanth et al.^{18} shows that the combination of MRI and SPECT data boosts the performance of diagnosis. It is important to note that the experiments in ref. 18 are conducted on the same PPMI dataset, but the authors used subjects from multiple time points, putting them together and running their method. This could be prone to several issues: (1) the subjects in the future time points, which were diagnosed as PD in the previous time points, are now in the late stages of PD, and (2) different time points of the same subject can be split in the training and testing sets, which helps unfairly increase the performance. Although the comparison is not fair, still we outperform their results by combining multiple modalities and proposing a more robust method.
Conclusion
In this paper, we introduced a kernelbased feature selection scheme, in which we select features and kernels that induce the best classification performance in the kernel space. Furthermore, we presented a kernel function by interweaving different kernel types, which is in accordance with the feature types, while being able to tolerate both linear and nonlinear properties of the data. The results indicate that the proposed framework for joint kernelbased feature selection and maxmargin classification induces the best performance for diagnosis for Parkinson’s disease, when using features from both SPECT and MRI modalities. We tested the proposed method on a large set of data and obtained competitive and superior results for the diagnosis of PD among all previous studies for PD.
Additional Information
How to cite this article: Adeli, E. et al. Kernelbased Joint Feature Selection and MaxMargin Classification for Early Diagnosis of Parkinson’s Disease. Sci. Rep. 7, 41069; doi: 10.1038/srep41069 (2017).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
Yuan, L., Wang, Y., Thompson, P. M., Narayan, V. A. & Ye, J. Multisource feature learning for joint analysis of incomplete multiple heterogeneous neuroimaging data. NeuroImage 61, 622–632 (2012).
AdeliMosabbeb, E., Thung, K.H., An, L., Shi, F. & Shen, D. Robust featuresample linear discriminant analysis for brain disorders diagnosis. In NIPS (2015).
Thung, K.H., Wee, C.Y., Yap, P.T., Shen, D. & Initiative, A. D. N. Neurodegenerative disease diagnosis using incomplete multimodality data via matrix shrinkage and completion. NeuroImage 91, 386–400 (2014).
Kerr, W. T. et al. Parameter selection in mutual informationbased feature selection in automated diagnosis of multiple epilepsies using scalp EEG. In PRNI (2012).
Gu, Q., Li, Z. & Han, J. Generalized fisher score for feature selection. In UAI (2011).
Wright, J., Yang, A. Y., Ganesh, A., Sastry, S. S. & Ma, Y. Robust face recognition via sparse representation. IEEE TPAMI 31, 210–227 (2009).
Peng, H., Long, F. & Ding, C. Feature selection based on mutual information criteria of maxdependency, maxrelevance, and minredundancy. IEEE TPAMI 27, 1226–1238 (2005).
Hofmann, T., Schölkopf, B. & Smola, A. J. Kernel methods in machine learning. Ann. Stat. 1171–1220 (2008).
Marek, K. et al. The parkinson progression marker initiative (PPMI). Progress in Neurobiology 95, 629–635 (2011).
Hastie, T., Tibshirani, R. & Friedman, J. The elements of statistical learning: data mining, inference and prediction, 2 edn. (Springer, 2009).
Garrett, D., Peterson, D. A., Anderson, C. W. & Thaut, M. H. Comparison of linear, nonlinear, and feature selection methods for EEG signal classification. IEEE TNSRE 11, 141–144 (2003).
Liu, M., Zhang, D., Adeli, E. & Shen, D. Inherent structurebased multiview learning with multitemplate feature representation for alzheimer’s disease diagnosis. IEEE TBME 63, 1473–1482 (2016).
Rondina, J. M. et al. SCoRS  a method based on stability for feature selection and mapping in neuroimaging. IEEE TMI 33, 85–98 (2014).
Tohka, J., Moradi, E., Huttunen, H. & ADNI. Comparison of feature selection techniques in machine learning for anatomical brain mri in dementia. Neuroinformatics 1–18 (2016).
Jankovic, J. Parkinson’s disease: clinical features and diagnosis. Journal of Neurology, Neurosurgery & Psychiatry 79, 368–376 (2008).
Menke, R. A. et al. MRI characteristics of the substantia nigra in parkinson’s disease: A combined quantitative T1 and DTI study. NeuroImage 47, 435–441 (2009).
Loane, C. & Politis, M. Positron emission tomography neuroimaging in parkinson’s disease. American Journal of Translational Research 3, 323–341 (2011).
Prashanth, R., Roy, S. D., Mandal, P. K. & Ghosh, S. Automatic classification and prediction models for early parkinson’s disease diagnosis from SPECT imaging. Expert Syst. Appl. 41, 3333–3342 (2014).
Duchesne, S., Rolland, Y. & Varin, M. Automated computer differential classification in parkinsonian syndromes via pattern analysis on MRI. A. Radiology 16, 61–70 (2009).
Adeli, E. et al. Joint featuresample selection and robust diagnosis of parkinson’s disease from MRI data. NeuroImage 141, 206–219 (2016).
Ziegler, D. & Augustinack, J. Harnessing advances in structural MRI to enhance research on Parkinson’s disease. Imag. in med. 5, 91–94 (2013).
Marquand, A. et al. Automated, high accuracy classification of parkinsonian disorders: a pattern recognition approach. PLoS One 8, e69237 (2013).
Focke, N. K. et al. Individual voxelbased subtype prediction can differentiate progressive supranuclear palsy from idiopathic parkinson syndrome and healthy controls. Human Brain Mapping 32, 1905–1915 (2011).
Salvatore, C. et al. Machine learning on brain MRI data for differential diagnosis of parkinson’s disease and progressive supranuclear palsy. Journal of Neuroscience Methods 222, 230–237 (2014).
RizkJackson, A. et al. Evaluating imaging biomarkers for neurodegeneration in presymptomatic huntington’s disease using machine learning techniques. NeuroImage 56, 788–796 (2011).
Cummings, J. L. et al. The role of dopaminergic imaging in patients with symptoms of dopaminergic system neurodegeneration. Brain 134, 3146–3166 (2011).
Hoehn, M. & Yahr, M. Parkinsonism: onset, progression and mortality. Neurology 17, 427–442 (1967).
Bhidayasiri, R. & Tarsy, D. Movement Disorders: A Video Atlas (Springer, 2012).
Braak, H. et al. Staging of brain pathology related to sporadic parkinson’s disease. Neurobio. of Aging 24, 197–211 (2003).
Burke, R. E., Dauer, W. T. & Vonsattel, J. P. G. A critical evaluation of the braak staging scheme for parkinson’s disease. Annals of neurology 64, 485–491 (2008).
Salvatore, C. et al. Machine learning on brain MRI data for differential diagnosis of Parkinson’s disease and progressive supranuclear palsy. J. of neuroscience methods 222, 230–237 (2014).
Pham, D. L. & Prince, J. L. An adaptive fuzzy cmeans algorithm for image segmentation in the presence of intensity inhomogeneities. Pattern recognition letters 20, 57–68 (1999).
Jenkinson, M., Bannister, P., Brady, M. & Smith, S. Improved optimization for the robust and accurate linear registration and motion correction of brain images. Neuroimage 17, 825–841 (2002).
Wu, G., Yap, P.T., Kim, M. & Shen, D. TPSHAMMER: Improving HAMMER registration algorithm by soft correspondence matching and thinplate splines based deformation interpolation. NeuroImage 49, 2225–2233 (2010).
Kimeldorf, G. S. & Wahba, G. A correspondence between bayesian estimation on stochastic processes and smoothing by splines. Ann. Math. Stat. 495–502 (1970).
Varma, M. & Babu, B. R. More generality in efficient multiple kernel learning. In ICML, 1065–1072 (2009).
Saghafi, B., Rajan, D. & Li, W. Efficient 2d viewpoint combination for human action recognition. Pattern Analysis and Applications 19, 563–577 (2016).
Calamai, P. H. & Moré, J. J. Projected gradient methods for linearly constrained problems. Mathematical programming 39, 93–116 (1987).
Chapelle, O., Vapnik, V., Bousquet, O. & Mukherjee, S. Choosing multiple parameters for support vector machines. Machine learning 46, 131–159 (2002).
Liu, P.L. & Der Kiureghian, A. Optimization algorithms for structural reliability. Structural safety 9, 161–177 (1991).
Cabral, R. S., De la Torre, F., Costeira, J. P. & Bernardino, A. Matrix completion for weaklysupervised multilabel image classification. IEEE TPAMI (2015).
Ling, H. & Okada, K. An efficient earth mover’s distance algorithm for robust histogram comparison. IEEE TPAMI 29, 840–853 (2007).
Tan, M., Wang, L. & Tsang, I. W. Learning sparse SVM for feature selection on very high dimensional datasets. In ICML, 1047–1054 (2010).
Guyon, I. & Elisseeff, A. An introduction to variable and feature selection. JMLR 3, 1157–1182 (2003).
Zou, H. & Hastie, T. Regularization and variable selection via the elastic net. J. of Royal Statistical Society: Series B (Statistical Methodology) 67, 301–320 (2005).
Salakhutdinov, R., Mnih, A. & Hinton, G. Restricted boltzmann machines for collaborative filtering. In ICML, 791–798 (2007).
Liu, G. et al. Robust recovery of subspace structures by lowrank representation. IEEE TPAMI 35, 171–184 (2013).
Van der Maaten, L. & Hinton, G. Visualizing data using tSNE. JMLR 9, 85 (2008).
Maji, S., Berg, A. C. & Malik, J. Classification using intersection kernel support vector machines is efficient. In CVPR (2008).
Worker, A. Cortical thickness, surface area and volume measures in parkinson’s disease, multiple system atrophy and progressive supranuclear palsy. PLoS One 9 (2014).
Ojala, M. & Garriga, G. C. Permutation tests for studying classifier performance. The Journal of Machine Learning Research 11, 1833–1863 (2010).
Author information
Authors and Affiliations
Contributions
E.A., B.S. and L.A. wrote the main manuscript text and conducted the experiments. G.W. and F.S. processed the data. E.A. prepared all the figures. All authors reviewed the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Adeli, E., Wu, G., Saghafi, B. et al. Kernelbased Joint Feature Selection and MaxMargin Classification for Early Diagnosis of Parkinson’s Disease. Sci Rep 7, 41069 (2017). https://doi.org/10.1038/srep41069
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep41069
This article is cited by

Exploiting macro and microstructural brain changes for improved Parkinson’s disease classification from MRI data
npj Parkinson's Disease (2024)

Prediction of Parkinson’s disease by transcranial sonographybased deep learning
Neurological Sciences (2024)

Classification of rat mammary carcinoma with large scale in vivo microwave measurements
Scientific Reports (2022)

An Improved Deep Polynomial Network Algorithm for Transcranial Sonography–Based Diagnosis of Parkinson’s Disease
Cognitive Computation (2020)

AtlasBased Classification Algorithms for Identification of Informative Brain Regions in fMRI Data
Neuroinformatics (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.