Rapid detection of target bacteria is crucial to provide a safe food supply and to prevent foodborne diseases. Herein, we present an optical biosensor for identification and quantification of Escherichia coli (E. coli, used as a model indicator bacteria species) in complex food industry process water. The biosensor is based on a nanostructured, oxidized porous silicon (PSi) thin film which is functionalized with specific antibodies against E. coli. The biosensors were exposed to water samples collected directly from process lines of fresh-cut produce and their reflectivity spectra were collected in real time. Process water were characterized by complex natural micro-flora (microbial load of >107 cell/mL), in addition to soil particles and plant cell debris. We show that process water spiked with culture-grown E. coli, induces robust and predictable changes in the thin-film optical interference spectrum of the biosensor. The latter is ascribed to highly specific capture of the target cells onto the biosensor surface, as confirmed by real-time polymerase chain reaction (PCR). The biosensors were capable of selectively identifying and quantifying the target cells, while the target cell concentration is orders of magnitude lower than that of other bacterial species, without any pre-enrichment or prior processing steps.
Recent reports estimate that about one-third of the food produced globally for human consumption is lost or wasted1,2. These losses occur at all stages of the food value chain and across all types of food, resulting in wastage of natural resources such as water, energy, and soil3. These alarming figures combined with recent estimations that the water requirements to meet food demand in 2050 may triple the current annual consumption4 reveal the urgent need to reduce the water footprint in both horticulture and the food industry3. Thus, increasing the reuse of water during food production and processing is an urgent need in the global effort to reduce food waste and improve sustainability5,6. A significant challenge for the development and operation of water reuse schemes is to ensure water quality and safety via appropriate monitoring techniques7,8,9. In particular, because microbiological quality assessment of food and water continues to rely on traditional culture-based techniques (which require at least 24 h to obtain results), real-time or near real-time evaluation of reused water safety remains a challenge10,11. Although advanced techniques in microbiology, e.g., biochemical kits, ELISA (Enzyme-Linked Immunosorbent Assay) and PCR (Polymerase Chain Reaction), have shortened assay time, they still lack the ability to detect microorganisms in real time or on-site12,13,14,15. Therefore, there is an unmet need for rapid, direct (no pre-cultivation enrichment), reliable, and portable methods to evaluate real-time quality and safety of water and food16. Biosensors offer significant advantages in microbial analysis of water and food samples, as they can include fast or real-time detection, portability, and multi-pathogen detection11,17,18,19,20,21. Such systems can potentially be deployed at food processing plants and food safety laboratories to allow for rapid detection of foodborne microorganisms and enhance food safety22,23.
Our work focuses on the development and application of a novel biosensing platform for rapid detection and identification of microbial contaminations in complex food industry process water (Fig. 1a). The optical, label-free biosensing platform is based on a nanostructured, oxidized porous silicon (PSi) designed to directly capture the target bacteria cells onto its surface with no prior sample processing24,25,26,27. PSi-based Fabry-Pérot thin films are functionalized with specific antibodies to act as the active component of the biosensor (Fig. 1b). White light is focused onto the biosensor and the optical data is collected throughout the experiment. The obtained reflectivity spectra are comprised of a series of Fabry-Pérot interference fringes28, resulting from reflections at the top and bottom interfaces of the porous thin film (Fig. 1c, upper panel). The collected spectra are analyzed by applying a fast Fourier transform (FFT), which results in a single peak with a characteristic effective optical thickness (EOT) and intensity (Fig. 1c, lower panel)29,30. The position of the peak along the x-axis of the FFT spectrum corresponds to the EOT value, which equals 2nL (where n is the effective refractive index of the porous film and L is its physical thickness)28. Introduction of the target bacteria to the biosensors results in their capture onto the biosensor surface. These specific binding events induce predictable changes in the thin-film optical interference spectrum of the biosensor, i.e., a decrease in the amplitude (intensity) of the reflected light (Fig. 1c). Our recent work has demonstrated the potential of these PSi-based biosensors to detect E. coli bacteria in laboratory suspensions at relatively low bacterial concentrations (in the range of 103–105 cells/mL) within minutes25,26,31.
In this new work, the biosensors were redesigned in terms of their surface chemistry and their ability to detect target bacteria within “real” process water (derived directly from the process line of fresh-cut produce industry) is studied (Fig. 1c). The bacterial profiles of the process water were determined by both conventional culturing technique in addition to a new polymerase chain reaction (PCR) based technology, IS-Pro32. We demonstrate rapid detection of E. coli (used as a model indicator bacteria) via a “direct cell capture” approach onto these biosensors. E. coli was used in this work as the target microorganism as it is considered as indicator bacteria for fecal contaminations33,34,35 and recognized as an important foodborne pathogen associated with fresh produce with very low infectious dose36. To achieve this goal, oxidized PSi films (PSiO2) were fabricated and biofunctionalized with specific antibodies against E. coli. Changes in the intensity of the reflectivity spectrum of the biosensor were monitored in real time upon exposure to process water containing E. coli bacteria (in addition to its high natural microbial load). Correlation between the measured light intensity and specific capture of the bacteria onto the biosensor allows for rapid detection and quantification of bacterial contaminations. The capture of the target E. coli cells onto the biosensor was confirmed and quantified by real-time PCR. This work sets the foundation for implementing a one-step and rapid biosensing platform in the food industry.
Process water characterization
Water samples from a fresh produce processing company were sampled from different washing lines and characterized by three different methodologies: culturing techniques, PCR methods, and by our label-free, optical biosensing platform (see Fig. 1).
The bacterial load in the process water, as determined by culturing on plate count agar (PCA) medium, was approximately 5 × 107 cells/mL. It is important to note that the actual number of live bacteria in the process water is probably much higher, as many bacteria species are considered as “unculturable” using current laboratory culturing techniques37. Bacterial population was characterized by using a new PCR-based profiling technique (IS-Pro)32 and the results are presented in Fig. 2a-2. In brief, the profiling is based on species-specific length polymorphisms of the interspace (IS) region (the IS region between 16 S and 23 S rRNA genes) and phylum-specific sequence polymorphisms of 16 S rRNA gene. Amplification of the IS region with fluorescently labeled phylum-specific primers yields peak profiles of the different bacteria species that the water contain (see Fig. 2a-2). The Is-Pro bacterial profile confirmed the presence of Firmicutes, Bacteroidetes and Proteobacteria in the water, while no E. coli was detected (in agreement with culturing results using E. coli specific medium, see Fig. 2b-2). For biosensing experiments, the process water were spiked with different concentrations of E. coli K-12 bacteria. The presence of E. coli in the spiked water was confirmed by both IS-Pro analysis and culturing (see Fig. 2a-3 and 2b-3).
Rapid detection of E. coli in process water
Preparation of biosensors
Biosensors were prepared from PSiO2 Fabry-Pérot thin films. The porous nanostructure was formed by anodization of a p-type Si wafer at a constant current density of 385 mA/cm2 for 30 s, followed by thermal oxidization to render the surface into SiO226. The morphology of the resulting porous nanostructure is presented in Fig. 3a. E. coli antibodies (IgG) were grafted onto the neat PSiO2 films using silanization chemistry and subsequent biotin-streptavidin (SA) coupling38. The detailed synthesis scheme is outlined in Fig. 3b. Briefly, biofunctionalization of the films was achieved by silanization with 3-aminopropyl(triethoxyl)silane (APTES) in order to form the amine-terminated PSiO2 (Fig. 3b-I) followed by exposure to glutaric dialdehyde (25 wt%) (GluAld) in order to form aldehyde-modified surface (Fig. 3b-II). Next, SA was attached to the aldehyde groups through its free amines, forming imine bonds39 (Fig. 3b-III). Lastly, due to their exceptional binding strength and specificity40, SA-biotin interactions were used to conjugate the biotinylated E. coli antibodies onto the nanostructure, (Fig. 3b-IV).
The binding of the E. coli antibodies (produced in rabbit) to the PSiO2 nanostructure was confirmed by exposing the biosensors to a fluorescently tagged anti-rabbit IgG followed by observation of the films under a fluorescence microscope. The fluorescence was quantified by image analysis (performed by Imaris Bitplane scientific software). Figure S1 (Supplementary Information) summarizes the results of these experiments, confirming the conjugation of the E. coli IgG to the SA-modified porous nanostructure and their activity. Control experiments using a fluorescently tagged anti-mouse IgG resulted in a negligible fluorescence signal indicative of the specificity of the IgG-modified PSiO2 biosensor, see Figure S1. Moreover, when the IgG conjugation step to the nanostructure was omitted, no fluorescence is detected, demonstrating the lack of unspecific binding between the anti-rabbit IgG and the SA-modified PSiO2 surface.
Our biosensors monitor changes in light reflected from the IgG-modified PSiO2 nanostructure, as shown in Fig. 4. Specific immobilization of E. coli cells onto the biosensor surface via antibody-antigen interactions induces a decrease in the amplitude (intensity) of the FFT peak of the porous film (Fig. 4c). These optical changes are correlated to cells captured onto the biosensor, clearly observed by optical microcopy studies (Fig. 4d)24,25,26,27.
The biosensors were incubated with process water spiked with E. coli K-12 bacteria (103 to 105 cells/mL) and the reflectivity spectra of the biosensors were collected using a CCD spectrometer and analyzed by applying a FFT. The incubation time was set to 15 min, after which the samples were washed with a buffer solution for 30 min. Figure 5 presents the results of a typical biosensing experiment (E. coli concentration of 104 cells/mL) in terms of changes in the FFT peak intensity vs. time. First, saline was introduced into the flow cell to acquire a stable intensity baseline. Upon process water introduction, a rapid decrease in the intensity (~30%) can be observed (Fig. 5a) due to light scattering. The optical signal remained constant during incubation, but following a washing step designed for removal of unbound bacteria as well as dirt and plant cells debris from the biosensor, the intensity has increased significantly until attaining a new baseline corresponding to a net intensity decrease of 5%. This significant intensity change is attributed to binding of the target bacteria to the IgG-modified surface25,26,27. When the original process water (no E. coli) were introduced onto the biosensor, a similar trend of a rapid decrease in the intensity is observed followed by a plateau during incubation (Fig. 5b). However, upon removal of the water and rinsing, the intensity is observed to return to its original baseline value, suggesting that no capture events have occurred.
To validate the results of the biosensing experiments, the biosensors were studied immediately after the optical experiments by both light microscopy and high-resolution scanning electron microscopy (HRSEM). Figure 5c presents HRSEM images of the biosensor exposed to the process water spiked with E. coli. A large number of intact immobilized bacteria cells are observed throughout the biosensor surface (Fig. 5c), while no cells are seen on the biosensor incubated with the original process water (Fig. 5d). In order to confirm that the captured cells are indeed E. coli K-12 bacteria, the cells were recovered from the biosensors and analyzed by real-time PCR. The results are summarized in Table 1, revealing that the DNA extracted and isolated from the biosensors indeed belongs to E. coli K-12.
Figure 6 depicts the optical response in terms of intensity decrease when the biosensors were exposed to process water samples spiked with different concentrations of E. coli K-12 (ranging from 103 to 105 cells/mL). The biosensor response is found to be proportional to E. coli bacterial concentration and a linear correlation is demonstrated (R2 = 0.98). Importantly, significant statistical differences (p < 0.05) are found between the intensity signal values measured for process water containing different E. coli concentrations. In terms of the sensitivity of the biosensor, our experiments show a relatively low detection limit of 103 cells/mL.
During the different stages of the food value chain over 40% of produced food is lost and wasted. This alarming statistic signals the need for a global effort and systemic approach to minimize losses throughout the food chain3. Moreover, in terms of global burden of foodborne diseases, according to the WHO (World health Organization)41, 600 million foodborne illnesses and 420,000 deaths were reported only in 2010. Therefore, developing advanced biosensing systems that can rapidly detect foodborne pathogens as early as during food processing and production is imperative for improving both food sustainability and safety3,4. This work focuses on the development and application of a new biosensing platform for rapid detection and identification of microbial contaminations in complex food industry process water. The water samples were collected directly from the process line of fresh-cut produce industry and thoroughly characterized in terms of their microbial profile by both conventional culturing technique and by IS-Pro analysis. This study presents a detailed comparison between biosensing results and gold-standard microbiological techniques (culturing and PCR) and a state-of-the-art microbiological method (IS-Pro). The total bacterial load of the process water as determined by culturing methods was approximately 5 × 107 cells/mL. The IS-Pro bacterial profile of the process water confirms the presence of diverse bacteria phyla and species, such as Firmicutes, Bacteroidetes and Proteobacteria, see Fig. 2a-2. E. coli were rarely found and are thus considered to be an indicator of possible microbial contamination of the fresh produce, in particular, fecal contamination33,34,35. These results were confirmed by both IS-Pro bacterial profiles and culturing (Fig. 2b-2).
Hence, for our biosensing experiments the process water were spiked with different concentrations of E. coli K-12 bacteria. The presence of E. coli in the spiked process water was confirmed by both IS-Pro analysis and culturing (see Fig. 2a-3 and 2b-3, respectively). The IS-Pro bacterial profile of the spiked process water contains characteristic E. coli peaks, marked with arrows for clarity, in addition to the typical characteristic profile of this water and in agreement to the molecular fingerprinting of a neat E. coli suspension (Fig. 2a-1). Moreover, the culturing results using E. coli specific medium (Fig. 2b) correspond to the IS-Pro analysis (Fig. 2a).
Recently, we have demonstrated the potential of PSi-based biosensors to detect E. coli bacteria in laboratory suspensions at relatively low bacterial concentrations (in the range of 103–105 cells/mL) within minutes25,26. Herein, we attempt to extend the capability of these biosensors to perform in complex samples at point-of-care to allow rapid assessment of food safety during early processing42. In order to meet the challenges of the complex samples, the biosensors were optimized in terms of their surface chemistry. Our previously-reported biosensors26, in which we used NHS ester reaction to immobilize the amine-terminated IgG to the PSiO2 surface, were not stable in process water (data not shown). Therefore, the a streptavidin/biotin-mediated conjugation of antibodies was employed and a final capping step with ethanolamine, for minimizing non-specific binding.
The nanostructured PSiO2 was functionalized with E. coli-specific antibodies through silanization chemistry followed by biotin-SA coupling (see Fig. 3b). The attachment of the antibodies to the PSi surface was confirmed by fluorescent labeling experiments, followed by observation of the biosensors under a fluorescence microscope. Figure S1 (Supplementary Information) summarizes the results of these experiments. The activity and specificity of the E. coli antibodies (produced in rabbit) conjugated to the PSi were confirmed by binding of fluorescently tagged anti-rabbit IgG. On the other hand, exposure of the biosensors to fluorescently tagged anti-mouse-IgG showed a negligible fluorescence signal. The latter is ascribed to minor non-specific binding of the anti-mouse IgG to the biosensor surface.
The biosensing concept, illustrated in Fig. 4, is based on monitoring changes in the light reflected from the IgG-modified PSiO2 in real time. Exposure of the biosensors to process water spiked with culture-grown E. coli (in addition to their natural high microbial load) resulted in specific E. coli capture onto the IgG-modified nanostructure via antibody-antigen interactions. Cells capture is detectable, as it induced a robust decrease in the intensity of the reflected light (Fig. 4c) and was further confirmed by optical micrographs of the biosensor surface (Fig. 4d).
For biosensing experiments, the process water samples were spiked with different E. coli concentrations ranging from 103 to 105 cells/mL. Figure 5 presents the results of a representative biosensing experiment in real time in terms of changes in the FFT peak intensity vs. time. Upon introduction of the process water (containing 104 cells/mL E. coli), a significant intensity decrease of 5% was obtained, attributed to binding of the target cells to the IgG-modified surface. As we demonstrated previously25,26,27, bacteria are excluded from penetrating into the nanostructure due to their size (typical dimensions of 0.8–2 μm43) and are therefore captured onto the surface. This in turn induces light scattering and results in a significant decrease in the intensity of the reflected light. It is important to note the stability of the intensity signal during the rinsing step (see Fig. 5a), indicating that the captured cells were tightly bound to the antibody under these conditions. When original process water (no E. coli) were introduced to the biosensor, the intensity is observed return to its original baseline value after removal of the process water and rinsing with saline (see Fig. 5b), suggesting that no capture events have occurred.
To validate the results of these experiments, all biosensors were studied by both light and electron microscopy. Observation of the biosensors immediately after the optical experiments by both light microscopy and HRSEM confirms the presence of immobilized bacteria cells onto the surface (Fig. 5c), while no cells were observed in the control experiments with the original water (Fig. 5d). These results support our approach that direct cell capture of bacteria onto the PSiO2 surface via antibody-antigen interactions can be observed by monitoring changes in the intensity of the reflectivity spectrum. Next, in order to confirm the specificity of the biosensors towards E. coli bacteria, the cells were recovered from the biosensors and were analyzed by real-time PCR. The results are summarized in Table 1, revealing that the DNA extracted and isolated from the biosensors indeed fits to that of E. coli. Moreover, the PCR quantification shows that the number of captured cells on the biosensors’ surfaces correlates to their concentration in the process water. To best of our knowledge, this is the first time that cells were recovered from a biosensor and thoroughly analyzed by real-time PCR to confirm the sensor performance in terms of its selectivity.
In Fig. 6, the averaged optical response of the biosensors upon introduction of process water spiked with different concentrations of E. coli is presented. The intensity signals are proportional to the target bacteria concentration. Thus, exposure of the biosensors to increasing E. coli concentrations results in a larger change in signal, i.e., a larger decrease in intensity can be observed (see Fig. 6a). The biosensors produced reproducible signals and the values obtained for each studied concentration are statistically significant (t-test, p < 0.05). Moreover, an excellent linear correlation (R2 = 0.9883) is demonstrated to the E. coli bacterial concentration in the range of 103 to 105 cells/mL (see Fig. 6b) and the measured limit of detection (LoD) is 103 cells/mL. It should be noted that to the best of our knowledge, this is the first report that demonstrates sensitive target bacteria detection of 103 cells/mL in real food industry water (containing high load of unknown wild type bacterial species, plant organisms and dirt), without any pre-enrichment or prior processing steps and a total assay time of 45 minutes. Moreover, although the biosensors capability still does not meet the microbial standards for drinking water in the Netherlands (0 CFU/100 mL for total coliforms and fecal coliforms)44, their ability to selectively detect and quantify the target bacteria in samples containing mixed bacterial populations at high bacterial loads (5 × 107 cells/mL) is noteworthy. In particular, as the majority of literature-reported work on biosensors presents their performance in simplified media e.g., buffer with target analyte, avoiding real environmental samples, in which consideration aspects such as sample pretreatment, matrix effects are crucial45,46.
In conclusion, this work demonstrates the application of new label-free optical immunosensors to real-world complex samples and discusses challenges associated with the analysis of such samples. These samples contained a high microbial load of various non-target microorganisms as well as soil particles and plant cell debris. The biosensors were capable of selectively identifying and quantifying the target cells, while the target cell concentration was orders of magnitude lower than that of other bacterial species. We achieved one order of magnitude improvement in the sensitivity in comparison with our previous studies26,31 in which neat bacterial suspensions were studied. In terms of the detection limit of the biosensor, the biosensor demonstrates a measured LoD of 103 cells/mL in real food industry water without any pre-enrichment or prior processing steps and a total assay time of 45 minutes. Currently we are exploring several approaches to enhance the sensitivity of the biosensor, including optimization of antibody concentration and orientation, via different coupling chemistries and incorporation of other capture probes, e.g., antibody fragments and aptamers. Moreover, we are developing strategies for integration of our biosensors with lab-on-a-chip approaches to facilitate their performance and achieve higher sensitivity together with rapid speed for bacteria detection. The presented biosensing platform is not only portable but is designed to remotely detect bacteria in the factory or field and indeed several preliminary experiments were successfully carried at the food factory site. Thus, our system has the potential to detect contaminations in product lines and expedite the decision-making process, plant sanitation, and product processing. Such technologies can facilitate the reuse of water, as they have the potential to be used as a screening tool to rule out pathogens in product lines and decrease the risk of cross contamination and spread of pathogens.
Preparation of Porous SiO2
Single-side polished and heavily doped p-type Si wafers (0.001 Ω-cm resistivity, 〈100〉 oriented, B-doped from Sil’tronix Silicon Technologies, France) were electrochemically etched in a 3:1 (v/v) solution of aqueous HF (48%, Merck, Germany) and ethanol (99.9%, Merck, Germany) for 30 s at a constant current density of 385 mA/cm2. Si wafers with an exposed area of 1.33 cm2 were contacted on the backside with a strip of aluminum foil and mounted in a custom-made Teflon etching cell; a platinum ring was used as the counter-electrode. After etching, the surface of the wafer was thoroughly rinsed with ethanol and dried under a stream of dry nitrogen gas. Subsequently, the freshly-etched PSi samples were thermally oxidized in a tube furnace (Thermolyne) at 800 °C for 1 h in ambient air.
Note: All the materials were purchased from Sigma Aldrich Chemicals unless otherwise mentioned.
Scanning Electron Microscopy
High-resolution scanning electron microscopy (HRSEM) studies of the PSiO2 biosensors immediately after the biosensing experiments were carried out using a Carl Zeiss Ultra Plus HRSEM at an accelerating voltage of 1 keV. The biosensors were fixed using a glutaraldehyde solution (2% in 0.1 M PBS) followed by dehydration through an ethanol series (10% to absolute). Phosphate-buffered saline (PBS) at pH = 7.4 was prepared by dissolving 50 mM Na2HPO4, 17 mM NaH2PO4, and 68 mM NaCl in Milli-Q water (18.2 mΩ-cm). Subsequently, the biosensors were sputtered with carbon.
Measurement of Interferometric Reflectance Spectra
Interferometric reflectance spectra of the samples were collected using a CCD spectrometer (Ocean Optics, USB4000) fitted with a microscope objective lens coupled to a bifurcated fiber optic cable. A tungsten light source was focused onto the center of the sample surface with a spot size approx. 1–2 mm2. Reflectivity data were recorded in the wavelength range of 400–1000 nm with a spectral acquisition time of 100 ms. Both illumination of the surface and detection of the reflected light were performed along an axis coincident with the surface normal. All optical experiments were conducted in a fixed cell in order to assure that the sample reflectivity is measured at the same spot during all the measurements. Spectra were collected in real time and analyzed by applying fast Fourier transform (FFT).
Biofunctionalization of PSiO2 Scaffolds
A PSiO2 sample was incubated with aqueous solution of 42 mM 3-aminopropyl(triethoxyl)silane (APTES) and 56 mM diisopropylethylamine (DIEA) for 30 min. After the removal of the solution, the surface was rinsed with purified water and ethanol for 10 min each and dried under a nitrogen stream. The resulting amine-terminated nanostructure was functionalized with 2% (v/v) glutaric di-aldehyde (25 wt%) (GluAld) aqueous solution for 30 min. Subsequently, the surface was washed with purified water and dried. A solution of sodium cyanoborohydride (10 μL) in HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid) buffer (1 mL) was pipetted onto the GluAld-modified PSiO2 and incubated for 30 min in order to stabilize the Schiff base, which is formed during reaction of the aldehyde groups with the amine groups. HEPES buffer solution at pH = 8 was prepared by dissolving 0.1 M HEPES and 0.1 M NaCl in Milli-Q water. Next, the surface was thoroughly rinsed with HEPES buffer and incubated in streptavidin (SA, from Jackson ImmunoResearch Labs Inc., USA) solution (100 μg/mL in PBS) for 1 h. Then, the reducing step with sodium cyanoborohydride was repeated in order to stabilize the Schiff base formed during SA fixation. In order to minimize non-specific binding, unreacted aldehyde groups on the PSiO2 were terminated using ethanolamine (3 M in BBS, incubation of 30 min)38,47. Borate buffered Saline (BBS) solution (0.15 M) at pH = 9 was prepared by dissolving 1 M boric acid and 1 M sodium tetra borate 10-hydrate in Milli-Q water. IgG-modified PSiO2 was achieved by incubation of the SA-modified surface with 100 μg/mL biotinylated E. coli rabbit antibody solution (from RayBiotech Inc., USA) for 1 h. The resulting biosensors were kept at 4 °C until used.
Fluorescent Labeling and Fluorescence Microscopy
Biosensors (IgG-modified PSiO2) were incubated with fluorescein (FITC)-conjugated anti-rabbit IgG (1:50 v/v dilution of manufacturer’s stock solution, from Jackson ImmunoResearch Labs Inc., USA) for 40 min. Biosensors were also incubated with fluorescein (FITC)-conjugated anti-mouse IgG as a control (1:50 v/v dilution of manufacturer’s stock solution, from Jackson ImmunoResearch Labs Inc., USA). Following conjugation, the samples were observed under a fluorescence microscope (Zeiss Axio) and images were taken using an AxioCamMRc camera. A constant exposure time of 4 s was used for all measurements. Data were analyzed by AxioVision and Imaris Bitplane scientific software.
Process water samples handling
Process water samples from a Dutch fresh-cut produce company were collected from different washing lines. The water samples were treated with 0.05 mg/mL tetracycline hydrochloride and kept at 4 °C, in order to prevent the growth of the microorganisms48 and allow the usage of a single batch of water over time. The effects of antibiotics and storage were studied by comparing fresh water (no antibiotics) with 1-month stored water. Water samples were cultured and similar bacterial loads were measured. For biosensing experiments, the process water were spiked with different concentrations of E. coli K-12 (generously supplied by Prof. Sima Yaron, Technion, Israel).
The total bacterial load of the water samples was determined by plating 1 mL of dilution series of the process water in plate count agar (PCA) medium (Becton, Dickinson and Company (BD), USA) using the pour plate technique, and incubating at 30 °C for 72 h.
E. coli count was determined by plating 100 μL of process water on Eosin Methylene Blue Agar (EMB Agar) medium (Becton, Dickinson and Company (BD), USA), which is a slightly selective and differential medium for the isolation and differentiation of Gram-negative enteric bacilli from clinical specimens. Colonies of E. coli on this specific medium appear as blue-black, with a green metallic sheen. Process water samples were incubated on an EMB agar medium at 37 °C for 24 h.
For biosensing experiments, E. coli K-12 were overnight grown in Luria Broth (LB) medium at 37 °C with shaking. LB medium was prepared by dissolving 5 g NaCl, 5 g yeast extract and 10 g tryptone (Becton, Dickinson and Company (BD), USA) in 1 L deionized water.
Bacterial concentration was monitored photometrically by reading the optical density (OD) at a wavelength of 600 nm. The number of cells is directly proportional to the OD600 measurements (1 OD600 = 3 × 108 cells/mL) and bacteria concentration is calculated from the obtained OD600 values. The correlation between bacteria concentration and OD600 measurement was determined empirically.
Process water (500 mL) were filtered through a 0.22 μm filter. Filters and biosensors were incubated in 600 μL lysis buffer (EasyMaglysis buffer, Biomerieux). DNA was purified from 500 μL lysate using a Chemagen DNA isolation robot (PerkinElmer) and eluted into 100 μL of 10 mM Tris/HCl (pH = 8.0) and 1 mM ethylenediaminetetraacetic acid (EDTA).
Bacterial profiles of process water samples were determined using IS-Pro technology. IS-Pro involves bacterial species differentiation by the length of the 16S–23 S rRNA genes interspace region with taxonomic classification by phylum-specific fluorescent labeling of PCR primers. The IS-pro procedure consists of two multiplex PCRs: a first PCR for the phyla Firmicutes, Bacteroidetes, Actinobacteria, Fusobacteria and Verrucomicrobia and a second PCR for the phylum Proteobacteria32,49. 10 μL DNA was used in each PCR and the PCR products were separated using an ABI Prism 3130XL Genetic Analyzer. The results are presented as color-labeled peak profiles. All data visualizations were performed with the Spotfire software package (TIBCO, Palo Alto, CA, USA).
Total bacterial loads and presence of E. coli bacteria on the biosensors’ surfaces (after sensing experiments) were measured by real-time PCR using primers targeting conserved regions in the 16S rRNA gene50. Quantification was performed using a standard consisting of the E. coli amplicon cloned into plasmid pGEM-T Easy (from Promega, USA). The amount of plasmid was calculated from A260 measurements. In this way, total copies of 16 S rRNA gene can be calculated. To transform this number into bacterial loads we used a mean of 4 16 S rRNA gene copies per bacterial cell. To measure specific E. coli loads we used an established E. coli-specific real-time PCR assay51.
Biosensors (IgG-modified PSiO2) were incubated with process water spiked with E. coli K-12, with concentrations ranging from 103 to 105 cells/mL, for 30 min. The original process water (no E. coli) were used as a control. In a typical experiment, the biosensor was fixed in a custom-made flow cell and a saline solution was introduced for 15 min for establishing optical baseline readout. Subsequently, 10 mL of process water was introduced and allowed to incubate for 15 min. Next, the cell was flushed for 15–30 min with saline (to remove non-target microorganism and dirt that may reside on the biosensor surface) until a constant optical signal was attained. Optical measurements were recorded throughout the experiment. The optical signal, i.e., FFT intensity change, is expressed in this work as percentage and was calculated using the following equation:
where A1 is the averaged intensity value collected from the biosensor during baseline establishment and A2 is the averaged intensity attained after exposure of the biosensor to the process water sample and subsequent washing. The detection limits were calculated from the linear correlation plot (see Fig. 6) using 3Se/m, where Se is the standard of error and m is the slope.
It should be also noted that the effect of antibiotics addition to the sampled water was studied. Biosensing experiments were carried out on freshly-sampled water (with and without the tetracycline treatment), and the antibiotic addition did not interfere with the biosensing results.
Statistical analysis is performed using a Student’s t-test with a minimum confidence level of 0.05 for statistical significance and assuming unequal sample sizes and unequal variance. All values are reported as the mean and standard deviation of the mean.
How to cite this article: Massad-Ivanir, N. et al. Porous Silicon-Based Biosensors: Towards Real-Time Optical Detection of Target Bacteria in the Food Industry. Sci. Rep. 6, 38099; doi: 10.1038/srep38099 (2016).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Gustavsson, J., Cederberg, C., Sonesson, U., van Otterdijk, R. & Meybeck, A. FAO study: “Global Food Losses and Food Waste–extent, causes and prevention”. Swedish Institute for Food and Biotechnology (SIK) (2011).
Godfray, H. C. J. et al. Food Security: The Challenge of Feeding 9 Billion People. Science 327, 812–818, doi: 10.1126/science.1185383 (2010).
Liu, J. G., Lundqvist, J., Weinberg, J. & Gustafsson, J. Food Losses and Waste in China and Their Implication for Water and Land. Environ. Sci. Technol. 47, 10137–10144, doi: 10.1021/es401426b (2013).
Bruinsma, J. The resource outlook to 2050: By how much do land, water and crop yields need to increase by 2050? Paper presented at the FAO Expert Meeting on “How to Feed the World in 2050” 24–26 June 2009, Rome (2009).
Lehto, M., Sipila, I., Alakukku, L. & Kymalainen, H. R. Water consumption and wastewaters in fresh-cut vegetable production. Agr. Food Sci. 23, 246–256 (2014).
Kirby, R. M., Bartram, J. & Carr, R. Water in food production and processing: quantity and quality concerns. Food Control 14, 283–299, doi: 10.1016/s0956-7135(02)00090-7 (2003).
Kumaraswamy, R. et al. Molecular Analysis for Screening Human Bacterial Pathogens in Municipal Wastewater Treatment and Reuse. Environ. Sci. Technol. 48, 11610–11619, doi: 10.1021/es502546t (2014).
Cotruv, J. et al. Water Recovery and Reuse: Guideline for Safe Application of Water Conservation Methods in Beverage Production and Food Processing. Center for Risk Science Innovation and Application of the ILSI Research Foundation (2013).
Asano, T. Water from (waste)water - the dependable water resource. Water Sci. Technol. 45, 24–33 (2002).
Roda, A. et al. Recent developments in rapid multiplexed bioanalytical methods for foodborne pathogenic bacteria detection. Microchimica Acta 178, 7–28, doi: 10.1007/s00604-012-0824-3 (2012).
Zhao, X., Lin, C. W., Wang, J. & Oh, D. H. Advances in rapid detection methods for foodborne pathogens. Journal of microbiology and biotechnology 24, 297–312 (2014).
Velusamy, V., Arshak, K., Korostynska, O., Oliwa, K. & Adley, C. An overview of foodborne pathogen detection: In the perspective of biosensors. Biotechnology Advances 28, 232–254, doi: 10.1016/j.biotechadv.2009.12.004 (2010).
Li, Y. Q. et al. A Synergistic Capture Strategy for Enhanced Detection and Elimination of Bacteria. Angewandte Chemie-International Edition 53, 5837–5841, doi: 10.1002/anie.201310135 (2014).
Lazcka, O., Del Campo, F. J. & Munoz, F. X. Pathogen detection: A perspective of traditional methods and biosensors. Biosens. Bioelectron. 22, 1205–1217, doi: 10.1016/j.bios.2006.06.036 (2007).
Farahi, R. H., Passian, A., Tetard, L. & Thundat, T. Critical Issues in Sensor Science To Aid Food and Water Safety. Acs Nano 6, 4548–4556, doi: 10.1021/nn204999j (2012).
Bhunia, A. K. One day to one hour: how quickly can foodborne pathogens be detected? Future Microbiology 9, 935–946, doi: 10.2217/fmb.14.61 (2014).
Subramanian, A., Irudayaraj, J. & Ryan, T. Mono and dithiol surfaces on surface plasmon resonance biosensors for detection of Staphylococcus aureus. Sensors and Actuators B-Chemical 114, 192–198, doi: 10.1016/j.snb.2005.04.030 (2006).
Subramanian, A., Irudayaraj, J. & Ryan, T. A mixed self-assembled monolayer-based surface plasmon immunosensor for detection of E-coli O157: H7. Biosens. Bioelectron. 21, 998–1006, doi: 10.1016/j.bios.2005.03.007 (2006).
Wang, D., Wang, Z., Chen, J., Kinchla, A. J. & Nugen, S. R. Rapid detection of Salmonella using a redox cycling-based electrochemical method. Food Control 62, 81–88, doi: 10.1016/j.foodcont.2015.10.021 (2016).
Yang, M. H., Sun, S., Kostov, Y. & Rasooly, A. Lab-on-a-chip for carbon nanotubes based immunoassay detection of Staphylococcal Enterotoxin B (SEB). Lab Chip 10, 1011–1017, doi: 10.1039/b923996k (2010).
Zelada-Guillen, G. A., Sebastian-Avila, J. L., Blondeau, P., Riu, J. & Rius, F. X. Label-free detection of Staphylococcus aureus in skin using real-time potentiometric biosensors based on carbon nanotubes and aptamers. Biosens. Bioelectron. 31, 226–232, doi: 10.1016/j.bios.2011.10.021 (2012).
Abdelhaseib, M. U. et al. Fiber optic and light scattering sensors: Complimentary approaches to rapid detection of Salmonella enterica in food samples. Food Control 61, 135–145, doi: 10.1016/j.foodcont.2015.09.031 (2016).
Bajwa, A., Tan, S. T., Mehta, R. & Bahreyni, B. Rapid Detection of Viable Microorganisms Based on a Plate Count Technique Using Arrayed Microelectrodes. Sensors (Basel, Switzerland) 13, 8188–8198, doi: 10.3390/s130708188 (2013).
Massad-Ivanir, N. & Segal, E. In Porous Silicon for Biomedical Applications Woodhead Publishing Series in Biomaterials (ed. Santos, H. A. ) 286–303 (Woodhead Publ Ltd, Abington Hall Abington, Cambridge Cb1 6ah, Cambs, Uk, 2014).
Massad-Ivanir, N., Shtenberg, G. & Segal, E. In Nano Bio-Technology for Biomedical and Diagnostics Research Vol. 733 Advances in Experimental Medicine and Biology (eds Zahavy, Eran, Ordentlich, Arie, Yitzhaki, Shmuel & Shafferman, Avigdor ) 37–45 (Springer, 2012).
Massad-Ivanir, N., Shtenberg, G., Tzur, A., Krepker, M. A. & Segal, E. Engineering Nanostructured Porous SiO2 Surfaces for Bacteria Detection via “Direct Cell Capture”. Anal. Chem. 83, 3282–3289, doi: 10.1021/ac200407w (2011).
Massad-Ivanir, N., Shtenberg, G., Zeidman, T. & Segal, E. Construction and characterization of porous SiO2/hydrogel hybrids as optical biosensors for rapid detection of bacteria. Adv. Funct. Mater. 20, 2269–2277, doi: 10.1002/adfm.201000406 (2010).
Sailor, M. J. & Link, J. R. “Smart dust”: nanostructured devices in a grain of sand. Chem. Commun., 1375–1383 (2005).
Pacholski, C., Sartor, M., Sailor, M. J., Cunin, F. & Miskelly, G. M. Biosensing using porous silicon double-layer interferometers: reflective interferometric Fourier transform spectroscopy. Journal of the American Chemical Society 127, 11636–11645 (2005).
Pacholski, C., Yu, C., Miskelly, G. M., Godin, D. & Sailor, M. J. Reflective Interferometric Fourier Transform Spectroscopy: A Self-Compensating Label-Free Immunosensor Using Double-layers of Porous SiO2. Journal of the American Chemical Society 128, 4250–4252 (2006).
Massad-Ivanir, N., Shtenberg, G. & Segal, E. Optical Detection of E. coli Bacteria by Mesoporous Silicon Biosensors. J. Vis. Exp., doi: 10.3791/50805 (2013).
Budding, A. E. et al. IS-pro: high-throughput molecular fingerprinting of the intestinal microbiota. Faseb J. 24, 4556–4564, doi: 10.1096/fj.10-156190 (2010).
Odonkor, S. T. & Ampofo, J. K. Escherichia coli as an indicator of bacteriological quality of water: an overview. 2013 4, doi: 10.4081/mr.2013.e2 (2013).
Scott, T. M., Rose, J. B., Jenkins, T. M., Farrah, S. R. & Lukasik, J. Microbial Source Tracking: Current Methodology and Future Directions. Applied and Environmental Microbiology 68, 5796–5803, doi: 10.1128/aem.68.12.5796-5803.2002 (2002).
Tallon, P., Magajna, B., Lofranco, C. & Leung, K. T. Microbial Indicators of Faecal Contamination in Water: A Current Perspective. Water, Air, and Soil Pollution 166, 139–166, doi: 10.1007/s11270-005-7905-4 (2005).
Food and Drug Administration (FDA), Analysis and Evaluation of Preventive Control Measures for the Control and Reduction/Elimination of Microbial Hazards on Fresh and Fresh-Cut Produce: Chapter IV. Outbreaks Associated with Fresh and Fresh-Cut Produce. Incidence, Growth, and Survival of Pathogens in Fresh and Fresh-Cut Produce. (2001).
Stewart, E. J. Growing Unculturable Bacteria. J. Bacteriol. 194, 4151–4160, doi: 10.1128/jb.00345-12 (2012).
Gaur, G., Koktysh, D. S. & Weiss, S. M. Immobilization of Quantum Dots in Nanostructured Porous Silicon Films: Characterizations and Signal Amplification for Dual-Mode Optical Biosensing. Adv. Funct. Mater. 23, 3604–3614, doi: 10.1002/adfm.201202697 (2013).
Christman, K. L. et al. Submicron streptavidin patterns for protein assembly. Langmuir 22, 7444–7450, doi: 10.1021/la0608213 (2006).
Kim, D. & Herr, A. E. Protein immobilization techniques for microfluidic assays. Biomicrofluidics 7, doi: 10.1063/1.4816934 (2013).
World Health Organisation estimates of the global burden of foodborne diseases. Foodborne diseases burden epidemiology reference group 2007–2015, Geneva: WHO (2015).
Vasan, A. S. S., Mahadeo, D. M., Doraiswami, R., Huang, Y. & Pecht, M. Point-of-care biosensor system. Frontiers in bioscience (Scholar edition) 5, 39–71 (2013).
Sundararaj, S. et al. The CyberCell Database (CCDB): a comprehensive, self-updating, relational database to coordinate and facilitate in silico modeling of Escherichia coli. Nucleic Acids Res. 32, D293–D295, doi: 10.1093/nar/gkh108 (2004).
World Health Organization. Guidelines for drinking-water quality, incorporating first addendum. Vol. 1, Recommendations. – 3rd ed., Geneva: WHO (2006).
Bridle, H., Balharry, D., Gaiser, B. & Johnston, H. Exploitation of Nanotechnology for the Monitoring of Waterborne Pathogens: State-of-the-Art and Future Research Priorities. Environ. Sci. Technol. 49, 10762–10777, doi: 10.1021/acs.est.5b01673 (2015).
Rodriguez-Mozaz, S., de Alda, M. J. L. & Barcelo, D. Biosensors as useful tools for environmental analysis and monitoring. Anal. Bioanal. Chem. 386, 1025–1041, doi: 10.1007/s00216-006-0574-3 (2006).
Rong, G., Najmaie, A., Sipe, J. E. & Weiss, S. M. Nanoscale porous silicon waveguide for label-free DNA sensing. Biosensors and Bioelectronics 23, 1572–1576, doi: 10.1016/j.bios.2008.01.017 (2008).
Andrews, J. M. Determination of minimum inhibitory concentrations. J. Antimicrob. Chemother. 48, 5–16 (2001).
Daniels, L. et al. Fecal microbiome analysis as a diagnostic test for diverticulitis. Eur. J. Clin. Microbiol. Infect. Dis. 33, 1927–1936, doi: 10.1007/s10096-014-2162-3 (2014).
Nadkarni, M. A., Martin, F. E., Jacques, N. A. & Hunter, N. Determination of bacterial load by real-time PCR using a broad-range (universal) probe and primers set. Microbiology-(UK) 148, 257–266 (2002).
van den Brand, M. et al. Development of a multiplex real-time PCR assay for the rapid diagnosis of neonatal late onset sepsis. J. Microbiol. Methods 106, 8–15, doi: 10.1016/j.mimet.2014.07.034 (2014).
This work was supported by the Resource Efficient and Safe Food Production and Processing (RESFOOD; www.resfood.eu) project, funded by the 7th Framework Programme of the European Commission. ES, N.M-I, G.S and N. R acknowledge the support by the Israel Science Foundation (Grant 1146/12). The authors would like to thank the fresh-cut industry for their practical support and collaboration.
The authors declare no competing financial interests.
Electronic supplementary material
About this article
Cite this article
Massad-Ivanir, N., Shtenberg, G., Raz, N. et al. Porous Silicon-Based Biosensors: Towards Real-Time Optical Detection of Target Bacteria in the Food Industry. Sci Rep 6, 38099 (2016). https://doi.org/10.1038/srep38099
The interplay of chemical structure, physical properties, and structural design as a tool to modulate the properties of melanins within mesopores
Scientific Reports (2022)
Design & Development of Laser Etched Porous-Silicon Capacitive Chip for Rapid Sensing of Pesticide Solvents
A lectin-coupled porous silicon-based biosensor: label-free optical detection of bacteria in a real-time mode
Scientific Reports (2020)
Fabrication of Microfluidic Cell Culture Platform for Real-time Monitoring of Lidocaine Concentration
International Journal of Precision Engineering and Manufacturing (2020)