Abstract
Mining large datasets using machine learning approaches often leads to models that are hard to interpret and not amenable to the generation of hypotheses that can be experimentally tested. We present ‘Logic Optimization for Binary Input to Continuous Output’ (LOBICO), a computational approach that infers small and easily interpretable logic models of binary input features that explain a continuous output variable. Applying LOBICO to a large cancer cell line panel, we find that logic combinations of multiple mutations are more predictive of drug response than single gene predictors. Importantly, we show that the use of the continuous information leads to robust and more accurate logic models. LOBICO implements the ability to uncover logic models around predefined operating points in terms of sensitivity and specificity. As such, it represents an important step towards practical application of interpretable logic models.
Similar content being viewed by others
Introduction
Regression and classification models are important tools for researchers in various fields. The application of these manytoone mapping models is twofold. First, they can be used for prediction. The output value or class of a (new) case can be predicted by applying the inferred mapping to the input variables of the case. Second, they inform us about the relationship between the input and the output. They specify how the input variables are (mathematically) interacting with each other to produce the output variable. The usefulness of the second application is, however, limited by the power of the human intellect. We suggest that the interpretation of these manytoone mapping models is of utmost, yet undervalued, importance in many research fields.
This also holds for computational biology, where a multitude of molecular and genomic data is frequently used to explain or predict a biological or clinical phenotype. Single predictor models are generally not accurate enough, reflecting the importance of acknowledging the interaction between biological components. On the other hand, machine learning approaches, such as Elastic Net^{1} and Random Forests^{2} produce complex multipredictor models that are hard to interpret and not amenable to the generation of hypotheses that can be experimentally tested. As a consequence, such models are not likely to further our understanding of biology. There is an urgent need for approaches that build small, interpretable, yet accurate models that capture the interplay between biological components and explain the phenotype of interest.
In this study, we have developed such a modeling framework to explain drug response of cancer cell lines using gene mutation data. Our approach, ‘Logic Optimization for Binary Input to Continuous Output’ (LOBICO) infers small and easily interpretable logic models of gene mutations (binary input variables) that explain the observed sensitivity to anticancer drugs in the cell lines (continuous output).
The contributions of our approach are threefold: First, the continuous information of the output variable is retained in the logic mapping. The output variable is binarized, which facilitates its interpretation, yet the distances of the continuous values to the binarization threshold are used in the inference. Second, LOBICO provides the user with the option to include constraints on the model performance that allows the identification of logic models around operating points predefined in terms of sensitivity and specificity. This enables tailoring of the model to, for example, clinical applications where the severity of diseases or side effects of the treatment dictate a desired level of specificity or sensitivity. Third, the logic mapping is formulated as an integer linear programming problem (ILP). This means that advanced ILP solvers can be used to find an optimal logic mapping fast enough to apply LOBICO to large and complex datasets without the need to tune parameters.
Our work is similar in spirit to logic regression (LR)^{3,4}, sparse combinatorial inference (SCI)^{5}, Markov logic networks^{6,7}, combinatorial association logic (CAL)^{8}, CellNetOptimizer^{9} and genetic programming for association studies (GPAS)^{10}, which all employ combinatorial logic to explicitly incorporate interactions in their models. The most important aspect in which LOBICO differentiates itself from these approaches is by its direct emphasis on interpretability. This is in contrast with the linearly weighted sums of logic functions as inferred by LR or the posterior probabilities of predictors in the model averaged across an ensemble of many solutions as inferred by SCI. Graphical models, such as Bayesian networks^{11} and Markov random fields^{12} also facilitate interpretation, although due to their probabilistic nature they do not lend themselves to standard formal reasoning as well as logic models do. MOCA (Multivariate Organization of Combinatorial Alterations)^{13} deserves special attention as it has also been applied to predict drug response by inferring logic combinations of genomic input features. The most important differences with our work are: (1) MOCA employs a heuristic, suboptimal progressive selection of features to infer logic formulas, and (2) MOCA uses discretized drug response values and discards the information in the continuous values that LOBICO uses in its model inference. Moreover, LOBICO includes constraints on statistical performance criteria, such as a minimum specificity, which is a novel feature not available in any other approach.
Here, we demonstrate LOBICO by application to a large cancer cell line panel, where the goal is to explain drug response based on binary mutation data of a set of genes^{14}. We investigate whether logic models perform better than singlegene predictors, and put genes that cooccur in logic models in the context of known cancer pathways. We assess whether using continuous output values provides benefit in terms of robustness and performance above the use of binarized data, which is usually the starting point for logical analysis of data^{15}. We also provide a comparison with Elastic Net, Random Forests and LR. Finally, we explore the power and flexibility of the ILP formulation by inferring logic models around different operating points in the receiveroperatorcharacteristic (ROC) space. We show that the ability to find robust and interpretable models with a predefined balance between false positives and false negatives is an important step towards practical application of these models.
Results
Sensitivity to anticancer drugs as a logic combination of gene mutations
We used LOBICO to find the logic combinations of mutations that best explain the response of cancer cell lines to anticancer drugs. This analysis was based on a panel of 714 cancer cell lines from more than 50 tumor types for which the binary mutation status of 54 known cancer genes was obtained^{14}. A gene was called mutated when it had a point mutation, a small insertion or deletion as determined by capillary sequencing, or when it was highly amplified or homozygously deleted based on copy number arrays. Additionally, we included the presence or absence of 6 known oncogenic gene fusions across these cell lines, resulting in a binary data matrix with a total of 60 features. The cell lines in the panel were screened against 142 anticancer drugs. The halfmaximal inhibitory concentrations at 72 hours (IC50s) obtained in this screen were used to represent the drug response and served as the continuous output variables. LOBICO was applied to the IC50s of each drug separately.
Figure 1 provides a schematic overview of the application of LOBICO to this dataset using the IC50s of the EGFR/ERBB2 inhibitor Afatinib as the output variable. For Afatinib, IC50s were obtained for 642 of the 714 cell lines. Although LOBICO uses the continuous values, it is also necessary to define a binarization threshold for the output variable. This threshold is used to divide the cell lines into two classes; the sensitive cell lines and the resistant cell lines. LOBICO finds an optimal logic function of binary mutation features that minimizes the error, which is defined as the sum of the weighted misclassified cell lines. A misclassification occurs when a sensitive cell line is predicted by the model to be resistant or vice versa. The weight is proportional to the distance to the binarization threshold. Consequently, misclassification of cell lines close to the binarization threshold does not considerably affect the optimization criterion, whereas there is a large penalty for misclassifying cell lines that are extremely sensitive or resistant to the drug. By default, the total weight associated with samples of each class is normalized in order to balance class importance. This is especially important for unbalanced classes as is often the case for the cell line panel, where we observed that, for most drugs, the bulk of cell lines are not affected, and only a small percentage (5–15% typically) end up in the class of sensitive cell lines. The optimization procedure is formulated as an integer linear programming (ILP) problem, which provides a practically efficient way to find optimal solutions. See Methods Section for more details.
Drug response is explained by multiple mutations
LOBICO finds logic models that are described in the disjunctive normal form (DNF), a standard notation in which every logic function can be expressed. The DNF is parameterized by two parameters: K, the number of disjuncts, and M, the number of terms per disjunct. We applied LOBICO with eight different parameter settings, i.e. from simple single predictor models (K = 1, M = 1) to more complex multipredictor models (K > 1, M > 1). See Table 1 for examples of the eight models. A stratified 10fold crossvalidation (CV) strategy was employed to select the appropriate model complexity, i.e. the one with the lowest CV error.
Application across all 142 drugs revealed that the large majority of drugs (85%) are best explained by multipredictor models (Table 1, Supplementary Data 1 and 2). This number remains high (81%) if we only consider the 72 drugs for which the CV error is statistically significant at a FDR < 1% and p < 0.01. In many cases the multipredictor model selected by CV was substantially better than the single predictor model (Fig. 2, Supplementary Figure 1). For example, LOBICO inferred a 4input OR model for the MEK1/2 inhibitor PD−0325901, which had a CV error of 0.21 while the best single input model only reached 0.34. The 4input OR model included the genes BRAF, NRAS, KRAS and HRAS. Thus, cell lines with a BRAF mutation or a mutation in NRAS, KRAS or HRAS (members of the RAS protein family) are predicted to be sensitive to this drug. Since BRAF and RAS are directly upstream of MEK in the MEKERK pathway, this association is easily understood from pathway biology. In general, OR models will increase the number of cell lines (or patient population) that are predicted to respond to a drug. On the other hand, AND models refine the predictions. For example, LOBICO inferred that cell lines with a mutation in both tumor suppressors TP53 and CDKN2A specifically respond to the microtubule inhibitor Paclitaxel (Taxol). These results strengthen the notion that gene mutations should not be considered in isolation, but in relationship to one another, if they are to be used as prognostic biomarkers or predictors of therapy response.
We validated these models using an independent drug sensitivity dataset from the Cancer Therapeutics Response Portal (CTRP, 2^{nd} version)^{16}. Our analyses were restricted to those compounds (n = 47) overlapping with our own study. We explored two scenarios. In Scenario 1 we trained LOBICO models on our data using the 344 cell lines overlapping with CTRP and validated on the CTRP drug response measurements of these 344 cell lines. In Scenario 2 we trained LOBICO models on the 377 cell lines that are unique to our dataset and then validated on the independent set of 344 CTRP cell lines. See Supplementary Figure 2 for an overview of these datasets. The results of these validation analyses are presented in Table 2. When training (using our data) and testing (using CTRP drug response) on the same cell lines (Scenario 1), we validated 5 of the 18 models (28%) that were statistically significant in the training phase, including both single and multiinput models (Supplementary Figures 3 and 4). Importantly, 4 of the 5 best performing models on our cell line panel were validated on CTRP with considerable statistical significance. Using the independent set of cell lines as a validation cohort (Scenario 2) we found that the two best performing models on GDSC validated with high statistical significance in CTRP (Supplementary Figure 5). Yet, many other strong models on GDSC, i.e. those with high statistical significance, did not lead to a significant prediction of drug response in CTRP (Supplementary Figure 6). Still, 5 of the 25 models (20%) that were statistically significant in the training phase also showed statistical significance in the CTRP validation cohort. Similar to Scenario 1, we found that in many cases multipredictor models outperformed single predictor models also on the validation cohorts. Overall, strong logic models validate in CTRP, whereas this is not necessarily the case for weaker, yet still statistically significant models, and generalization of these models to different cell line panels should be approached with caution. See Supplementary Note 1 for details.
Use of continuous output yields more robust and accurate models
After LOBICO was successfully employed to infer sensible models of drug response, we set out to quantify the contribution of the use of the samplespecific weights. In other words, is it advantageous to use the distances from the continuous IC50s to the binarization threshold as samplespecific misclassification penalties? Or, would simply using binarized data as is done in standard logical data analysis^{15} as well as in a recent application to cancer cell line drug screening data^{13} be equally informative?
To this end, we analyzed logic models under slightly different binarization thresholds. Specifically, we shifted the default threshold (t = 0.05) slightly downwards (t = 0.03) and upwards (t = 0.07) leading to, on average, 24% less and 22% more sensitive cell lines, respectively. As such, these parameter changes lead to a small (not insignificant, yet also not substantial) change in the assignment of cases (sensitive cell lines) and controls (resistant cell lines). See Methods Section for details. Then, we ran LOBICO across these binarization thresholds with and without the samplespecific weights. The logic models for a drug were inferred using the model complexity (defined by K and M) selected by CV for that drug in the standard setting, i.e. with the samplespecific weights and t = 0.05. We conjectured that small changes in the binarization thresholds should only moderately affect the inferred logic models, i.e. the models should be robust against these small changes.
In order to evaluate the robustness of the logic models we examined the feature importance (FI) scores of these models across the binarization thresholds. Specifically, we used the correlation of FI scores across the binarization thresholds as a measure of robustness, where the degree of change in the FI scores is inversely proportional to the robustness of the model. The FI score for a feature is defined as the increase in error when the feature is left out of the inferred logic model (Equation 9). The FI scores are not only based on the optimal logic model, but also on other good (suboptimal) logic models that are identified by the ILP solver. (See Methods Section for details.) Across the 72 statistically significant models we found that most features are essential, i.e. have a high FI score, for a specific drug. However, BRAF, CDKN2A and TP53 play an important role in explaining the drug response for many of the drugs in our panel (Supplementary Figure 7). As an example of FI scores, Fig. 3a depicts the FI scores of the 60 gene mutation features for the PI3K/mTOR inhibitor BEZ235. From this panel it is clear that two features, PTEN and PI3KCA, are important in explaining BEZ235 response. More importantly, when samplespecific weights are employed, the FI remains robust across different values of the discretization threshold.
Also across the remaining drugs the use of the continuous output via samplespecific weights resulted in a substantially smaller variation in the FI scores across the binarization thresholds (Fig. 3b). Particularly, the FI scores for the logic models across the three thresholds had an average Pearson correlation coefficient larger than 0.75 for all but two drugs (99% of the drugs), and 106 drugs (75% of the drugs) had a correlation larger than 0.95. This was in stark contrast to the logic models based without the samplespecific weights, where 93 drugs (65%) had a correlation larger than 0.75 and only 44 (31%) had a correlation larger than 0.95. From this observation we conclude that the use of the samplespecific weights based on the continuous output makes the inferred logic models less sensitive to small changes in the dataset, i.e. more robust.
We also assessed the robustness of the logic models across the CV training folds. Here, we observed a similar pattern, although the difference between using and not using samplespecific weights was less pronounced (Supplementary Note 2 and Supplementary Figure 8). Logic models inferred from the randomly sampled subsets of cell lines, i.e. the CV folds, showed more variability in feature importance scores than the models inferred with slight changes in the binarization threshold. This is not surprising, since the in or exclusion of samples, especially those far away from the binarization threshold, can have a large effect on the optimization function (Equation 1) and thus the inferred optimal logic model. One such example in our dataset is represented by the drug Bicalutamide, which has the poorest CV performance (point in the top right in Fig. 2). Here, the cell line HT3 has an extremely low IC50, much lower than all other sensitive cell lines (see Supplementary Data 1). This results in a disproportionally large weight for this sample (its weight is 0.21), whereas the total weight of all 657 cell lines, for which IC50s have been obtained, is 1. This analysis hints at an important weakness of our approach: Outliers, i.e. samples with erroneously large or small output values, have a large effect on the inferred logic model. In general, it is thus very important that outliers are detected and removed before performing a LOBICO analysis.
Studying the robustness across different CV folds led us to investigate the number of cell lines needed to effectively run LOBICO. We implemented a subsampling strategy that showed a substantial influence on performance and robustness. Specifically, whereas for 51% of the drugs LOBICO inferred logic models that are robust and predictive when using all cell lines, this number decreased to 25% of the drugs when using 50% of the cell lines (around 300 cell lines). With a subsampling frequency of 10% (around 60 cell lines) only 18% of the drugs had a robust and predictive model (Supplementary Note 3 and Supplementary Figure 9). The balance between the sensitive and the resistant class as well as the classification performance are important factors in determining whether LOBICO can be effectively run for a smaller cell line panel.
Next, we employed a ‘ground truth’ mapping between drugs and mutations to gauge whether the use of continuous output variables led to more accurate models. This mapping, which is based on the annotation of the drug targets and expert knowledge, links 49 drugs to one or more of the 60 gene mutation features (Supplementary Data 2). For each of these 49 drugs, we analyzed the FI scores of the ground truth features. In this case, we used ‘aggregated’ FI scores, which were not just based on the optimal and suboptimal models from the model complexity with the lowest CV error, but also on the other model complexities that have a CV error equal or smaller than the CV error for the single predictor model (K = 1, M = 1). These aggregated FI scores provide a more comprehensive landscape of the importance of gene mutations in explaining drug response (Fig. 3a).
For 19 of the 49 drugs, the total aggregated FI scores of the ground truth features were not larger than 0.05, both for the logic models with as well as without the samplespecific weights (Fig. 3c). In these cases, the ground truth features did not explain the observed variation in drug response. For 26 of the remaining 30 drugs, the logic models with sample specific weights had larger FI scores for the ground truth features versus only 4 for the logic models without sample specific weights. Moreover, for 7 drugs, the use of the sample specific weights increased the importance of the ground truth features by at least 0.1. These 7 drugs included the PI3K/mTOR inhibitor BEZ235, 2 BRAF inhibitors and 4 small molecule inhibitors that target PDGFRA and KIT mutants, two of which also target FLT3 mutants, according to the ground truth mapping. Amongst the sensitive cell lines for these drugs, those with the smallest IC50s, i.e. the most sensitive ones, indeed harbored mutations in the ground truth features. This explains the increased accuracy of the logic models with samplespecific weights of retrieving the ground truth features.
The use of samplespecific weights is a prominent feature of LOBICO that sets it apart from traditional methods that use binarized data. The results presented in this section demonstrate that the use of the continuous output leads to more robust and accurate logic models.
LOBICO finds logic models around a userdefined operating point
A binary classifier can make two kinds of mistakes: false positives (Type I errors) and false negatives (Type II errors). The tradeoff between the false positive rate (FPR, 1specificity) and false negative rate (FNR, 1sensitivity) defines the operating point of the classifier. The practical application of a binary classifier in any domain is determined by its operating point, the prevalence of positives in the population of interest and the costs, financial or otherwise, that are associated with false positives, false negatives and the test itself.
For example, many medical screening tests, which are relatively inexpensive and generally noninvasive, have high sensitivity and are useful for ‘ruling out’ patients that test negative. For example, a mammogram to screen for breast cancer has a sensitivity of 80% and a specificity of 90%^{17}. (It should be noted that periodic screening amounts to a large total number of false positives as evidenced by the fact that half of the women screened in the US will receive a false positive mammogram in any 10year period^{18}).
The implementation of LOBICO as an integer programming problem allows one to add constraints to ensure that solutions meet predefined statistical performance criteria, such as a minimum specificity. We have applied lower bounds on the sensitivity and specificity by adding additional constraints to the ILP (see Equations 10 and 11). If a solution is found, the corresponding logic model is guaranteed to meet these constraints. By setting various lower bounds on the sensitivity and specificity we can probe the receiveroperatorcharacteristic (ROC) space. In that way we can uncover logic models possibly employing different features at different operating points. Note that this analysis is quite different from the classical ROC analysis, where the same model is evaluated with different thresholds on the output parameter.
For the 25 drugs with the lowest CV error in the original analysis, we ran LOBICO with an array of sensitivity and specificity constraints covering the complete ROC space in intervals of 0.05. The optimal solution for each combination of sensitivity and specificity was again determined by CV. Note that the inclusion of the constraints could lead to different model complexities having the smallest CV error. The Pareto front of solutions is formed by the logic models that perform best in terms of the tradeoff between sensitivity and specificity. This front is equivalent to the ROC curve, although the model at each operating point is different. We observed a large variation in the logic models across this curve, both in terms of the genes that were present in the models as well as the model complexity (Supplementary Data 3).
Figure 4a depicts the logic models in the ROC space for a single drug: MEK inhibitor AZD6244 (brand name Selumetinib), which is currently in clinical trials. Mutations in the gene BRAF clearly play an important role in explaining the drug response in the cell line panel, since BRAF is found in almost all solutions in the ROC space. The most specific solution near the bottomleft of the curve (FPR < 5%) states that BRAF mutants that neither have a CDKN2A nor a TP53 mutation are sensitive to this drug. This high specificity solution can be termed a ‘rule in’ solution, because due to the low FPR, cell lines (or, potentially in the future, patients) that carry a BRAF mutation and are CDKN2A or TP53 wildtype are very likely to respond to this drug. However, this solution explains only slightly more than 20% of the sensitive cell lines (true positive rate (TPR) ≈ 20%). Around the middle of the ROC curve, we observed a 3input OR solution consisting of BRAF, KRAS and NRAS, the latter two being part of the RAS protein family, which is directly upstream of BRAF, MEK and ERK in the MAPK pathway. This solution has a TPR slightly below 60% and a FPR < 30%. At the topright of the ROC curve, LOBICO provided a high sensitivity solution (TPR > 95%) that did not contain BRAF. This 4input AND model predicts that cell lines that are wildtype (WT) for PIK3CA, RB1, STK11 mutations and that do not contain the EWSFLI1 gene fusion, will respond to the drug. Another way to interpret this solution is that cell lines that have a mutation in either PIK3CA, RB1, STK11 or that contain the EWSFLI1 gene fusion are resistant to the drug with a very high degree of certainty (FPR < 5% for identifying resistant cell lines). This high sensitivity solution can be termed a ‘rule out’ solution, as cell lines (or potentially patients) that satisfy this rule will most likely not respond to this drug.
Across the 25 drugs, there were 6 inhibitors of MEK or RAF, 2 inhibitors of Phosphoinositide 3kinase (PI3K) and 2 inhibitors of Aurora kinase (AURK). The logic models across the ROC space displayed high similarity within these three groups (Supplementary Figure 10). Figure 4b–d show the average FI scores of the highspecificity (‘rule in’) solutions and the highsensitivity (‘rule out’) solutions. As already observed with the MEKinhibitor AZD6244, mutations in BRAF and NRAS are indicative of drug response with high specificity for the MEK/RAF inhibitors. Conversely, the high importance scores for wildtype RB1 and PIK3CA in the high sensitivity solutions indicate that RB1 and PIK3CA mutants are resistant to these inhibitors. These observations fit within the current ideas on oncogenic signaling, as mutations in the tumor suppressor RB1 and oncogene PIK3CA can lead to uncontrolled cell growth by activating pathways other than the MAPK pathway that these inhibitors are targeting^{19,20}. For the PI3K and AURK inhibitors we observed that cell lines with a mutation in the transmembrane receptor NOTCH1 are responsive with high specificity. KRAS and, noteworthy, PIK3CA mutants remain resistant to these drugs.
The ability to uncover logic models around predefined operating points is an important requirement for practical application of such models. The implementation of additional constraints in the ILP formulation of LOBICO enabled us to systematically probe the ROC space and uncover logic models for different operating points of interest. To the best of our knowledge, LOBICO is the first method to provide this important capability.
Discussion
Generally speaking, classification and regression approaches are primarily focused on prediction performance. Today’s stateoftheart methods use complicated computational frameworks and data transformations to optimize how well the model fits the data. These models have little bearing on the mental model of the person using the approach. The interpretation of the model, if possible at all, is typically limited to a ranked list of important features.
Here, we have presented LOBICO, which, although also optimizing data fit, was developed specifically to produce models that are intuitively understandable. It is important to recognize that performance and interpretation form a tradeoff; by constraining a model to be simplistic enough to enable interpretation, one loses the freedom that a complex model can be used to achieve a better representation of the data. LOBICO generates small and robust logic models of binary input features that explain a continuous output.
These models, which fit with standard formal reasoning, allow a researcher to easily assimilate the model with his or her domain. We suggest that the use of interpretable models is crucial in any scientific discipline, where researchers, not machines, generate hypotheses, gain novel insights and decide on further experimentation.
We have demonstrated the application of LOBICO on a large cancer cell line panel by linking logic combinations of gene mutations to drug response. These logic models are easily integrated into current thinking based around stratifying patient populations using individual and combinations of gene mutations. LOBICO is, however, a general framework that can be applied to all research questions that can be described as a mapping from binary input features to a continuous output variable. For example, we successfully applied LOBICO to a cross of two natural yeast strains, the offspring of which were phenotyped for sporulation efficiency (Supplementary Note 4 and Supplementary Figure 11). Importantly, although most (biological) measurements are not binary, they are often amenable to binarization or, at least, a binary interpretation. The use of binary variables allows for standard formal reasoning. That is, if the relation between variables is described using logic, it can be easily understood and reasoned with. An argument against such binarization is the loss of information. In the models that we propose the continuous information of the phenotype variable is retained in the form of samplespecific weights, which, as we have shown, leads to more robust models. This is achieved by splitting the continuous phenotype into a binary vector and a vector with samplespecific weights. We envision that LOBICO has many applications, both within biology as well as in other domains. An important consideration for applying LOBICO, however, is that the dataset at hand has the statistical power that enables one to detect logical relationships that explain the phenotype of interest. For example, most genomewide association studies of complex traits lack compelling statistical support for epistatic interactions, or the relative magnitude of statistical epistasis is small^{21}.
There are certain considerations about the applicability of LOBICO. First, LOBICO solves an NPhard problem (Supplementary Note 5). We observed that the ILP solver can quickly traverse the search space of logic combinations when searching for small logic models. When looking for large models, on the other hand, the search space quickly explodes and it becomes prohibitive to find an optimal solution. However, we generally restrict LOBICO from inferring large models as they tend to overfit and are less interpretable.
We note that logic regression (LR) implements another search strategy based on simulated annealing, which also achieved a good performance on our dataset (Supplementary Note 6). In comparison, LR cannot guarantee that the obtained solution is optimal nor can it incorporate statistical performance constraints, which is the most relevant scenario for practical applications.
Second, the number of features and correlation structure within the feature space have a large impact on the feasibility of finding an optimal solution within a reasonable time. Large numbers of features drastically increase the search space. Hence, feature selection may be a prudent preprocessing step. When preselecting features, it would no longer be guaranteed that the optimal logic model is found. However, experiments on the cancer cell line panel show that features employed by the optimal logic model have high importance scores both in linear and nonlinear regression models (Supplementary Note 7 and Supplementary Figure 12). Thus, these methods might be useful for feature selection when LOBICO is to be applied to datasets with a prohibitively large number of features. Alternatively, expert knowledge can be used to preselect a smaller set of features. An advantage of the latter approach is that these features make sense to the domain experts and will lead to more easily interpretable models.
Correlated features are problematic, not only for LOBICO, but for most (sparse) linear or nonlinear classification and regression models. Highly correlated features are effectively interchangeable. In practice, this means that only one feature is selected or that the importance in the model is spread across these features. An additional disadvantage for LOBICO is that the ILP solver will spend a long time deciding which of the correlated features should be part of the optimal solution. Also, from the perspective of interpretation, correlated features can lead to ambiguity and should preferably be dealt with prior to performing a LOBICO analysis.
The implementation of LOBICO as an ILP framework offers substantial advantages and possibilities. Using sophisticated ILP solvers, LOBICO traverses the huge search space of logic combinations fast enough for application to large datasets involving multiple model complexities and crossvalidation. An argument against logical analysis is the loss of information when binarizing continuous data. The ILP formulation allows LOBICO to retain the continuous information in the form of samplespecific weights, which, as an added benefit, leads to robust models. Further, constraints guaranteeing predefined statistical performance criteria can be easily incorporated into the ILP framework, giving the logic models direct practical applicability.
A straightforward extension includes adjusting the ILP formulation to prioritize or even require certain features to be part of the inferred logic model. Also, certain combinations of features can easily be allowed or disallowed in the model. Furthermore, biological networks can be captured by ILP constraints, possibly reducing the search space and leading to logic models that reflect network biology. Another avenue for feature engineering for logic models based on cancer mutations would be the inclusion of mutually exclusive or cooccurring mutations^{22,23} as single features. These ideas will be explored in future research.
Methods and Materials
Cancer cell line dataset
We used a slightly expanded version of a previously published cancer cell line dataset^{14}. Specifically, our dataset contained 714 cell lines and 142 drugs instead of 639 and 130, respectively, in the original publication. Although capillary sequencing was performed for 64 genes, our dataset only included the 54 genes for which at least one mutation or copy number aberration was found. A gene was called mutated when it had a point mutation, a small insertion or deletion as determined by capillary sequencing, or when it was highly amplified or homozygously deleted based on copy number arrays. This strategy of lumping together these genomic aberrations to derive mutated genes is identical to the original work^{14}. Additionally, we included 6 known oncogenic gene fusions, resulting in 60 mutation features. The drug screening dataset is incomplete, i.e. not all 142 drugs have been screened across all 714 cell lines. In total 81,700 IC50s were measured and 19,688 (19%) were missing values. For the large majority of drugs, IC50s were obtained for between 600 to 700 cell lines. Since we applied LOBICO to each drug separately, cell lines that lack an IC50 were not used. We did not impute missing IC50s. In this work, IC50s were recorded as the natural logarithm of the halfmaximal inhibitory μM concentration. Complete data and information on cell lines, the binary mutation matrix, drugs and IC50s are found in Supplementary Data 2 and 4. Additional information on these data is found in^{14,24} and on the Genomics of Drugs Sensitivity in Cancer webpages (http://www.cancerrxgene.org/).
Binarization thresholds of the IC50s
The binarization threshold for each of the drugs was automatically determined using a heuristic outlier procedure, which consists of four steps:

1
Upsampling. For a drug, we gathered the IC50s and their confidence intervals of all (n) cell lines that were screened for that drug. Then, for each cell line, we took the IC50 and the confidence interval and used this to define a normal distribution. Specifically, the mean of this normal distribution was the IC50 and the standard deviation was the average difference between the IC50 and the lower and upper bound of the confidence interval. We sampled 1,000 data points from this normal distribution and repeated that for all cell lines, leading to 1,000 · n data points in total.

2
Density estimation. We performed kernel density estimation on the 1,000 · n data points using as kernel a normal distribution with bandwidth (standard deviation) 0.5. This kernel density estimate, f, is defined on the interval from the minimum value of the 1,000 · n data points, f^{min}, to the maximum value, f^{max}, and was normalized such that .

3
Modeling the population of resistant cell lines. The population of resistant cell lines was modeled as a normal distribution. We used the mode (highest point) in f as the mean, μ, of this distribution. This choice was based on the expectation and previous observation that the large majority of cell lines is resistant to a drug^{14}. To compute the standard deviation of this distribution, σ, we first computed the parameter θ, which marks the divide between sensitive and resistant cell lines. θ was computed using the following rules.

i
θ is the maximum value, where the derivative f′ is zero, i.e. f′(θ) = 0, under the constraints that θ < μ, f(θ) < 0.8 · f(μ) and .

ii
If no such value exists, θ is the maximum value, where the second derivative f′′ is zero, i.e. f′′(θ) = 0, as well as f′′′(θ) > 0, again under the constraints that θ < μ, f(θ) < 0.8 · f(μ) and .

iii
If no such value exists, θ was set to f^{min}.
If θ is found under rule i., this indicates bimodality in f, i.e. there is another peak in the distribution to the left of μ, which represents the distribution of sensitive cell lines. Similarly, if θ is found under rule ii., there is a marked change in the slope of f, which points to the distribution of sensitive cell lines. The standard deviation, σ, is computed as the median distance of all data points within the interval [θ μ]from μ. Finally, the population of resistant cell lines is represented by the Normal distribution N(μ, σ^{2}), which we denote by g.

i

4
Evaluating the cumulative normal distribution to find the binarization threshold. The binarization threshold, b, is controlled by parameter t. Specifically, b is chosen such that the cumulative normal distribution function at b equals t, i.e. . The default setting for t is 0.05. Cell lines with IC50s smaller than b are called sensitive, whereas cell lines with IC50s larger than or equal to b are called resistant.
Supplementary Figures 13, 14 and 15 provide a visual description of the fourstepprocedure to binarize IC50s for three different drugs, where rule i., ii., and iii. were used to find θ, respectively. Binarization thresholds (for t = 0.05) are found in Supplementary Data 2.
LOBICO
The goal of LOBICO (Logic Optimization for Binary Input to Continuous Output) is to construct a Boolean logic function that optimally maps the binary variables of an input dataset to a continuous output variable. LOBICO is an extension to the work of Kamath et al.^{25}, which describes a way to solve the Boolean Function Synthesis Problem (BFSP) using integer linear programming (ILP). See Supplementary Note 5 for a description of the BFSP. Similarly to the BFSP, LOBICO is an NPhard problem (also in Supplementary Note 5).
LOBICO has three main inputs:

1
X, a N × P binary matrix with N samples characterized by P binary features x_{1}, x_{2}, …, x_{P}. The P columns of X are denoted as x_{1}, x_{2}, …, x_{P}.

2
y, a N × 1 binary vector, which is the binarized version of the continuous output variable.

3
w, a N × 1 continuous vector with weights for each of the N samples.
LOBICO finds an optimal logic function that minimizes the weighted sum of incorrectly inferred samples:
where, y′ = Θ(X) is a binary vector with the inferred binary labels. The logic functions inferred by LOBICO are in disjunctive normal form (DNF), a generalized logic notation also known as the sumofproducts expression. The complexity of a DNF is determined by two parameters: K, the number of disjunctive terms and M, the maximum number of selected features per disjunctive term.
ILP formulation of LOBICO
The ILP formulation to find an optimal given X, y, w, K and M employs three variables: First, selection variables are introduced to determine which variable is part of a disjunctive term.
Second, auxiliary variables t_{1}, …, t_{K}, which are vectors of length N, are used to represent the disjunctive terms. Third, the disjunctive terms are combined in the final disjunction resulting in the inferred binary output variable y′. Figure 5 presents a graphical overview of the variables used in the ILP formulation.
The complete ILP formulation is given below.
subject to
Following is a brief interpretation of the equations. The objective function in Equation 4 is the ILP formulation of Equation 1 and thus represents the weighted sum of incorrectly inferred samples, which should be minimized. The constraints in Equation 5 ensure that x_{p} and its negation are not simultaneously part of the same disjunctive term. The constraints in Equation 6 ensure that the total number of selected features in a disjunctive term does not exceed M. Equation 7 encodes the ANDgates that define the K disjunctive terms. The output of the ANDgate t_{nk} is only 1 for those samples, where the binary data in X agrees with all selected features, i.e. . In that case, the two summations in the middle part of the equation add up to P, thereby constraining t_{nk} to 1. Equation 8 encodes the ORgate, which combines the K disjunctive terms in the inferred binary output variable y′.
Feature importance scores
Feature importance (FI) scores are based on the activity measure of variables in Boolean networks^{26,27}. The importance score of feature a is defined as:
It represents the increase in the weighted sum of incorrectly inferred samples (Equation 1), henceforth called error, when comparing the optimal solution , resulting in the error w^{T}(y′ − y), with , the optimal solution where feature a is left out of the model, resulting in the error .
In practice, leaving feature a out of the DNF is achieved by either setting all values of a to 1 in the case that feature a is part of a disjunctive term with at least one other feature, or setting all values of a to 0 in the case that feature a is the only feature in the disjunctive term. Features that are not part of the model (DNF) receive an importance score of 0.
See “Application to the cancer cell line panel” below, where we explain how we aggregated feature importance scores across suboptimal solutions, model complexities and CV folds to quantify the importance of gene mutations in explaining drug sensitivity.
Sensitivity and specificity constraints
The ILP formulation, which includes both the actual output (y) and inferred output (y′), enables the straightforward implementation of constraints, which guarantee that the ILP solution meets certain performance statistics (provided that a solution actually exists). Specifically, we implemented constraints on minimum sensitivity (also called true positive rate or recall), TPR^{min}, and minimum specificity, (also called true negative rate or one minus the false positive rate), TNR^{min}, as follows:
Note that in Equation 10 is the number of positives and is the number of true positives. In Equation 11 is the number of negatives and is the number of true negatives.
Using the notion of samplespecific weights (as represented by w), we defined ‘continuous’ versions of constraints on the sensitivity and specificity as follows:
Visualizations of LOBICO solutions in the ROC space using the constraints on the ‘continuous’ sensitivity and specificity are found in Supplementary Data 3.
Application to the cancer cell line panel
LOBICO inputs
LOBICO was applied to each drug in the cancer cell line panel separately. The three main inputs for each LOBICO analysis were:

1
X, the N × P binary mutation matrix with N cell lines and P = 60 binary gene mutations. N differs per drug as not all drugs have been screened across all cell lines. For the large majority of drugs, N is between 600 and 700.

2
y, the N × 1 binary vector indicating whether a cell line is sensitive (1) or resistant (0) to the drug. This vector is obtained by binarizing the continuous IC50s using the binarization threshold, which is determined as explained above.

3
w, a N × 1 continuous vector with weights for each of the N cell lines. w is simply the absolute difference between the IC50s and the binarization threshold, normalized per class:
here, z_{n} is the continuous IC50 of cell line n and b the binarization threshold for the drug. The normalization ensures that both classes (sensitive and resistant) have the same total weight, i.e. 0.5. Note that . In “Use of continuous output yields more robust and accurate models”, where we compared to the setup in which we did not use the samplespecific weights, .
Statistical performance constraints
For the analyses described in “LOBICO finds logic models around a userdefined operating point”, we systematically varied TPR^{min} (Equation 10) and TNR^{min} (Equation 11). For all other analyses in the paper, we did not employ the statistical performance constraints.
Model complexities
We applied LOBICO with eight different DNF complexities, i.e. we used all combinations of natural numbers K and M provided that K · M ≤ 4 (see Table 1).
Crossvalidation
For each LOBICO analysis in the paper, a stratified 10fold crossvalidation (CV) strategy was employed.
Permutation test
We implemented a straightforward statistical test to decide whether an inferred logic model performed significantly better than random. First, we took the inferred class labels (sensitive (1) and resistant (0)) of the inferred logic model when applied to the test folds in the CV. Here, the model complexity of the employed logic model was the optimal complexity according to CV. The binary vector was permuted 1,000,000 times and the error (i.e the sum of the weighted misclassified cell lines) associated with each permutation was computed and recorded. The permuted errors, the mean of which is 0.5, were compared to the original CV error. The permutation test Pvalue was computed using EPEPT (Enhanced Pvalue Estimation for Permutation Tests)^{28,29}. This was done for all 142 logic models. We derived qvalues for each of the 142 Pvalues. A logic model was called statistically significant when both its pvalue and qvalue (FDR) were smaller than 0.01.
Feature importance scores
We computed two types of FI scores for the analysis of the drug response models:

1
Modelcomplexityspecific FI scores. The modelcomplexityspecific (MCS) importance of feature f is the nonzero average of the FI scores of feature f, I_{f} (Equation 9), obtained from the optimal solution and suboptimal logic models (if any) for particular model complexity (K and M). Often the suboptimal solutions differ only slightly in error with respect to the optimal model, but contain different features. (See “Solving the ILP using CPLEX” later in this section that explains how suboptimal solutions are found.) This means that the MCS FI score of feature f is the mean FI of f across all “good” logic models that contain feature f. Features that are neither part of the optimal logic model nor part of any suboptimal logic model get a score of zero. In this work, the samplespecific weights were normalized such that errors are between 0 and 1, with random prediction resulting in an expected error of 0.5 (Equation 14). Hence, FI scores are between 0 and 0.5, although the large majority (about 90%) of the nonzero FI scores are smaller than 0.05, and only a small portion (about 5%) are larger than 0.1. The MCS FI scores were used in the robustness analysis (Fig. 3b and Supplementary Figure 8) and the ROC analysis (Fig. 4). They are displayed in Supplementary Data 1 and the upper part of Fig. 3a.

2
Aggregated FI scores. The aggregated importance of feature f is the nonzero average of the MCS FI scores of all model complexities that have a CV error equal or smaller than the CV error for the single predictor model (K = 1 and M = 1). Calculating the aggregated FI score involves averaging across the logic models based on all samples as well as the logic models based on the CV training folds. Hence, the aggregated FI scores provide a more comprehensive view of the importance of features in explaining the variation in the output variable. The aggregated FI scores were used in the ground truth analysis (Fig. 3c). They are displayed in Supplementary Data 2 and the lower part of Fig. 3a.
Solving the ILP using CPLEX
The ILP problems were solved using IBM ILOG CPLEX Optimization Studio V12.4, which is freely available for academic use. Importantly, ILP solvers guarantee optimal solutions (within a numerically small tolerance). Besides the optimal solution, we collected suboptimal solutions using CPLEX’s solution pool. Specifically, up to 25 solutions with a relative gap smaller than 0.1 were gathered using the default pool replacement strategy of replacing the least diverse solutions. We employed a time limit of 1 hour (3600 seconds) per ILP. Less than 1% of the ILP runs did not find the guaranteed optimal solution within this time limit (See Supplementary Figure 16). These solutions were all for 2 × 2 models. In these cases we used the best solutions found thus far. All other parameters were set to their default values.
LOBICO code availability
LOBICO is implemented in MATLAB and Python and is available through https://github.com/tknijnen/LOBICO.
Additional Information
How to cite this article: Knijnenburg, T. A. et al. Logic models to predict continuous outputs based on binary inputs with an application to personalized cancer therapy. Sci. Rep. 6, 36812; doi: 10.1038/srep36812 (2016).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
Zou, H. & Hastie, T. Regularization and variable selection via the elastic net. Journal of the Royal Statistical Society: Series B (Statistical Methodology) 67, 301–320 (2005).
Breiman, L. Random forests. Machine learning 45, 5–32 (2001).
Ruczinski, I., Kooperberg, C. & LeBlanc, M. Logic regression. Journal of Computational and Graphical Statistics 12, 475–511 (2003).
Kooperberg, C. & Ruczinski, I. Identifying interacting SNPs using Monte Carlo logic regression. Genetic epidemiology 28, 157–170 (2005).
Mukherjee, S. et al. Sparse combinatorial inference with an application in cancer biology. Bioinformatics 25, 265–271 (2009).
Sakhanenko, N. A. & Galas, D. J. Markov logic networks in the analysis of genetic data. Journal of Computational Biology 17, 1491–1508 (2010).
Richardson, M. & Domingos, P. Markov logic networks. Machine learning 62, 107–136 (2006).
De Ridder, J. et al. Inferring combinatorial association logic networks in multimodal genomewide screens. Bioinformatics 26, i149–i157 (2010).
Saez‐Rodriguez, J. et al. Discrete logic modelling as a means to link protein signalling networks with functional analysis of mammalian signal transduction. Molecular systems biology 5, 331 (2009).
Nunkesser, R., Bernholt, T., Schwender, H., Ickstadt, K. & Wegener, I. Detecting highorder interactions of single nucleotide polymorphisms using genetic programming. Bioinformatics 23, 3280–3288 (2007).
Pearl, J. & Russell, S. Bayesian networks. (Computer Science Department, University of California, 1998).
Kindermann, R. & Snell, J. L. Markov random fields and their applications. Vol. 1 (American Mathematical Society Providence, RI, 1980).
Masica, D. L. & Karchin, R. Collections of simultaneously altered genes as biomarkers of cancer cell drug response. Cancer research 73, 1699–1708 (2013).
Garnett, M. J. et al. Systematic identification of genomic markers of drug sensitivity in cancer cells. Nature 483, 570–575 (2012).
Boros, E. et al. An implementation of logical analysis of data. Knowledge and Data Engineering, IEEE Transactions on 12, 292–306 (2000).
SeashoreLudlow, B. et al. Harnessing connectivity in a largescale smallmolecule sensitivity dataset. Cancer discovery 5, 1210–1223 (2015).
Carney, P. A. et al. Individual and combined effects of age, breast density, and hormone replacement therapy use on the accuracy of screening mammography. Annals of internal medicine 138, 168–175 (2003).
Hubbard, R. A. et al. Cumulative Probability of FalsePositive Recall or Biopsy Recommendation After 10 Years of Screening MammographyA Cohort Study. Annals of internal medicine 155, 481–492 (2011).
Burkhart, D. L. & Sage, J. Cellular mechanisms of tumour suppression by the retinoblastoma gene. Nature Reviews Cancer 8, 671–682 (2008).
Yuan, T. & Cantley, L. PI3K pathway alterations in cancer: variations on a theme. Oncogene 27, 5497–5510 (2008).
Wei, W.H., Hemani, G. & Haley, C. S. Detecting epistasis in human complex traits. Nature Reviews Genetics 15, 722–733 (2014).
Ciriello, G., Cerami, E., Sander, C. & Schultz, N. Mutual exclusivity analysis identifies oncogenic network modules. Genome research 22, 398–406 (2012).
Leiserson, M. D., Wu, H.T., Vandin, F. & Raphael, B. J. CoMEt: a statistical approach to identify combinations of mutually exclusive alterations in cancer. Genome biology 16, 1 (2015).
Yang, W. et al. Genomics of Drug Sensitivity in Cancer (GDSC): a resource for therapeutic biomarker discovery in cancer cells. Nucleic acids research 41, D955–D961 (2013).
Kamath, A. P., Karmarkar, N. K., Ramakrishnan, K. & Resende, M. G. C. A continuous approach to inductive inference. Mathematical programming 57, 215–238 (1992).
Shmulevich, I. & Kauffman, S. A. Activities and sensitivities in Boolean network models. Physical review letters 93, 048701 (2004).
Kahn, J., Kalai, G. & Linial, N. In Foundations of Computer Science, 29th Annual Symposium on. 68–80 (IEEE, 1988).
Knijnenburg, T. A., Wessels, L. F., Reinders, M. J. & Shmulevich, I. Fewer permutations, more accurate Pvalues. Bioinformatics 25, i161–i168, doi: 10.1093/bioinformatics/btp211 (2009).
Knijnenburg, T. A., Lin, J., Rovira, H., Boyle, J. & Shmulevich, I. EPEPT: a web service for enhanced Pvalue estimation in permutation tests. BMC bioinformatics 12, 411, doi: 10.1186/1471210512411 (2011).
Acknowledgements
T.A.K. would like to thank Bob Duin for fruitful discussions. T.A.K. and F.I. would like to thank Julio Saez Rodriguez for fruitful discussions. T.A.K. would like to thank Tycho Bismeijer for help with the Python implementation. National Cancer Institute (U24CA143835). Netherlands Organization for Scientific Research (The Cancer System Biology Center).
Author information
Authors and Affiliations
Contributions
T.A.K., I.S. and L.F.A.W. conceived the idea for this work. T.A.K. implemented the method and performed the computational experiments. T.A.K. and L.F.A.W. analyzed the data and wrote the manuscript. G.W.K. and F.I. contributed to development of the method and provided analysis and interpretation of the results. M.J.G., U.M., I.S. and L.F.A.W. provided supervision during this project. All authors commented on and reviewed the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Knijnenburg, T., Klau, G., Iorio, F. et al. Logic models to predict continuous outputs based on binary inputs with an application to personalized cancer therapy. Sci Rep 6, 36812 (2016). https://doi.org/10.1038/srep36812
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep36812
This article is cited by
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.