Figure 5 | Scientific Reports

Figure 5

From: Rotating lattice single crystal architecture on the surface of glass

Figure 5

The 2D single crystal pattern created by rastering the laser beam along the length of line followed by a 10 μm transverse step on the surface of 16SbI3–84Sb2S3 glass.

SEM image (a) and colored crystal orientation deviation (COD) map (b). The previously laser-induced line was used as seed for growth. Scale bar 10 μm. Arrows on COD map (b) describe the axis and direction of the lattice cell rotations during transverse step.

Back to article page