Introduction

The epidermis of plant roots comprises of two types of cells: trichoblasts and atrichoblasts. During development trichoblasts give rise to tubular extensions which develop into root hairs. Root hair formation is a three step process that is initiated by the swelling of a bulge, followed by tip growth initiation and elongation through polarized exocytosis1. Root hairs of cereals significantly increase the root surface and are therefore instrumental for nutrient uptake and optimal development2,3,4,5,6.

Different modes of epidermis differentiation into trichoblasts and atrichoblasts have been observed in plants. Trichoblast formation in Arabidopsis is position-dependent. Only epidermis cells that are situated in a cleft between two underlying cortical cells become trichoblasts and form root hairs. In Arabidopsis, the molecular network involved in epidermis specification and thus the differentiation into trichoblasts and atrichoblasts is well understood (reviewed in: Hochholdinger and Nestler7). In contrast, maize epidermis cells can differentiate into trichoblasts irrespective of their position8,9. In maize, roothairless5 (rth5) is the only gene known to date that controls root hair density and thus the differentiation of epidermis cells into trichoblasts10.

In maize, four genes that control root hair elongation have been identified. The roothairless 1 (rth1) gene encodes a SEC3 subunit11 of the exocyst complex which tethers exocytotic vesicles prior to their fusion thus mediating exocytotic tip growth of root hairs12. The roothairless3 (rth3) gene is translated into a monocot-specific COBRA like cell wall protein13. A phylogenetic study on gene families related to cell wall formation revealed that mutant alleles of ZmCslD5 exhibit a root hair defect14. Most recently, the roothairless5 (rth5) gene was shown to give rise to a monocot-specific NADPH oxidase, which is involved in the tip growth of root hairs10.

Plant cell walls provide structure and determine the shape of plant cells15. In general, two types of cell walls can be distinguished. All dicots and most monocots develop type I cell walls. Only species of the monophyletic clade commelinids which includes the poaceae family, which comprise cereals such as maize, rice and wheat develop type II cell walls16. Both, type I and type II cell walls contain mostly cellulose, synthesized by cellulose synthases of the CESA gene family14. Cell expansion integrates the loosening of existing cell wall components with the deposition of new components. In elongating cells, cellulose microfibrils are separated and reoriented by turgor forces and subsequently interlaced by matrix constituents. In class II cell walls in species such as maize, microfibrils are crosslinked by glucuronoarabinoxylans (GAXs) while pectins contribute to only a small fraction of the matrix polymers17. Moreover, networks of phenylpropanoids are deposited in type II cell walls. In contrast to other commelinids, the order of poales which includes the cereals synthesize a mixed-linkage (1 → 3), (1 → 4)-β-glucan during cell expansion that is hydrolyzed when growth stops18. Root hairs develop two layers of cell walls. The thin α-layer at the root hair tip can be expanded and formed by turgor pressure, while the thick β-layer at the non-growing tubular parts of the root hair provides stability and strength19. Hence, the synthesis of cell wall components in the α-layer of root hairs is instrumental for their elongation as illustrated by mutants defective in this process13,20,21,22.

In the present study we report the cloning and functional characterization of the rth6 gene of maize which encodes CSLD5, a monocot and root hair-specific D-type cellulose synthase required for the transition from bulge formation to tip growth in root hair formation.

Results

The roothairless6 gene controls root hair length in all root-types of maize

A mutant specifically affected in root hair elongation but otherwise normal was identified in a phenotypic screen of an F2-population resulting from Mutator transposon mutagenesis. Genetic crosses established that this mutant phenotype is controlled by a single recessive allele. Moreover, genetic crosses of homozygous mutants of this new mutant allele with the previously isolated mutants rth1 to rth5 resulted in complementation thus demonstrating that these mutants are not allelic. Therefore, this new mutant was designated roothairless6 (rth6). Subsequently, additional rth6 alleles rth6-2 to rth6-6 were generated (see methods).

Stereo microscopy demonstrated that rth6-1 mutants display significantly shorter root hairs than their wild-type siblings in all major root-types including primary-, seminal- and crown roots (Fig. 1A). Quantification of root hair length established that on average rth6-1 root hairs developed only 4–5% of the length of wild-type root hairs in primary, seminal and crown roots (Fig. 1B). Root hair morphology of wild-type and rth6 was analyzed via cSEM (cryo scanning electron microscopy). High-resolution cSEM pictures revealed that rth6 forms only root hair bulges (Fig. 1F–H) which did not elongate compared to wild-type root hairs (Fig. 1C–E). The basal bulges of rth6 were characteristically swollen (Fig. 1G) like the basal region of wild-type root hairs (Fig. 1D). In contrast to wild-type root hairs, the bulges of rth6 were arrested at this developmental stage and unable to elongate. High-resolution pictures of root hair tips illustrated that wild-type root hairs had a smooth surface (Fig. 1E) while the surface of mutant rth6 root hairs was rough as a consequence of defects during root hair formation (Fig. 1H). In addition, mutant rth6-1 root hair tips (Fig. 1H) displayed small outgrowths with a very rough surface at the tip. These are likely the initiation sites which represent the switch from bulge formation to root hair elongation which is defective in rth6-1.

Figure 1: Phenotype of rth6 mutants.
figure 1

(A) Microscopic images of 3–4 cm long primary roots, seminal roots and crown roots of wild-type (WT) (upper panels) and rth6 mutants (lower panels). (Scale bar: 1 mm; n = 25, error bars indicate SD; Student’s t-test ***p ≤ 0.001). (B) Root hair length of 3–4 cm long primary roots, seminal roots and crown roots of WT and rth6 mutants. (CH) Cryo scanning electron microscopic (cSEM) images of WT primary root surface (CE) and rth6 primary root surface (FH) at 100x magnification (C,F), 1,000x magnification (D,G) and tips of root hairs at 10,000x magnification (E,H).

Cloning of rth6 by a combination of BSR-Seq and Seq-walking

The rth6 gene was genetically mapped to the short arm of chromosome 1 by B-A translocation stocks. Subsequently, 123 mutant and 123 wild-type individuals of a F2-mapping population segregating for rth6 mutant phenotypes were subjected to BSR-Seq. This analysis demonstrated that the causative gene maps to the centromeric region of chromosome 1 (Fig. 2A). Chromosome 1 was then scanned using a window containing 100 SNPs and a step size of 20 SNPs. Within each window, the median linkage probability obtained from a Bayesian BSA analysis across all 100 SNPs was determined and plotted against the middle physical position of the window. This process mapped the rth6 gene to a 15.7 cM interval flanked by IDP (insertion deletion polymorphism) markers IDP6931 (130.8 cM) and IDP525 (146.5 cM) of ISU IBM Map7 1 (Fig. 2B) which corresponded to ~50 Mb on the physical map of chromosome 1 (ZmB73_AGPv1 release 4a53; http://ftp.maizesequence.org/release-4a.53/). Correlation of physical and genetic distances on chromosome 1 calculated via molecular markers from an IBM genetic map23 indicated that the centromeric region denoted by a vertical line exhibited low rates of recombination per Mb (Fig. 2C).

Figure 2: BSR-Seq mapping of rth6.
figure 2

(A) BSR-Seq analyses confines rth6 to the centromeric region of chromosome 1. (B) BSR-Seq scanning defines a 15.7 cM rth6 interval which corresponds to ~50 Mb. (C) Correlation of physical and genetic map positions illustrate the low recombination rates in the centromeric region of chromosome 1. The vertical line indicates the position of the rth6 gene on the physical map. (D) Gene structure of rth6. Exons: black boxes, introns: thin lines between black boxes, UTR: untranslated region, CDS: coding sequence. The positions of transposon insertions in for novel alleles, rth6-2, rth6-4, rth6-5 and rth6-6 are indicated. Functional domains of the RTH6 protein are indicated. RING/Ubox: RING/Ubox like Zinc-finger domain, TM: transmembrane domain.

Genomic DNA extracted from the inbred line B73 and a pool of seedlings derived from a self of a plant with the genotype rth6-1/rth6-2 was used to construct Seq-walking libraries, which were then sequenced on an Ion Proton instrument (see methods). In total, 16,680,521 raw sequence reads were obtained, 7,175,209 from the rth6 library and 9,505,312 from the B73 library. Reads were sorted and decoded according to their barcode sequences. Subsequently, barcodes, adapters and Mu-related sequences were removed. The remaining Mu flanking sequences that were longer than 90 bp (3,054,970 and 2,703,957, respectively) were aligned to the B73 reference genome.

Mu insertions recovered from the B73 Seq-Walking library were assumed not to be responsible for an rth6 mutation. This subtractive process resulted in the identification of 29 Mu insertion sites within the rth6 mapping interval (Chr1: from 102, 196, 700 bp to 144, 956, 100 bp) that had been defined by the BSR-Seq experiment (Fig. 2B). Many more reads (N = 22,945) were obtained for a single insertion site (Chr1: 104, 610, 900 bp) within the GRMZM2G436299 gene than for any other of the 28 sites within the mapping interval (Table S1). Confirmative PCR experiments on genomic DNA of the rth6-1 and rth6-2 alleles demonstrated that the observed Mu insertion derived from allele rth6-2, whereas the reference allele rth6-1 did not contain a detectable Mu transposon insertion. Based on the Mu insertion in exon 3 of rth6-2, we declared GRMZM2G436299 an rth6 candidate gene.

Confirmation of rth6 identity via the generation of independent alleles

To confirm that GRMZM2G436299 indeed represents the rth6 gene, two independent Mu-induced mutant alleles (rth6-3 and rth6-4) and two Ac/Ds insertion alleles (rth6-5 and rth6-6) obtained via a reverse genetic screen (see methods) were analyzed. All four of these novel alleles displayed the roothairless phenotype and transposon insertion sites were mapped by PCR and subsequent sequencing (Table 1). These experiments confirmed that GRMZM2G436299 is the rth6 gene by independent mutant alleles which contain transposon insertions at different positions of exon 1 (rth6-4, rth6-5, rth6-6) and exon 3 (rth6-2) of the candidate gene. These results were further substantiated by crosses of the transposon induced alleles to the reference allele rth6-1, each of which failed to complement.

Table 1 Mutant alleles of rth6.

Structure and functional domains of RTH6

The rth6 gene contains four exons and three introns encoding a 3,866 bp open reading frame which translates into a 1,159 aa protein (Fig. 2D) with a predicted molecular weight of 129 kD and an isoelectric point of 7.9 (http://web.expasy.org). RTH6 is predicted to be a membrane protein with 8 transmembrane domains that contains an N-terminal RING/Ubox like Zinc-finger domain, and a C-terminal cellulose synthase-like protein domain (http://www.ebi.ac.uk/Tools/hmmer).

Phylogenetic reconstructions reveal the presence of RTH6 homologs in early land plants and strict separation of mono and dicot clades

Sequence similarity searches and phylogenetic analyses revealed that rth6 encodes a CELLULOSE SYNTHASE-LIKE D (CSLD) protein, which belongs to the D-type subfamily of the cellulose synthase superfamily. The CSLD proteins which are illustrated in Fig. 3 cluster into monocot (Fig. 3, red), dicot (Fig. 3, blue) and non-seed-plant (Fig. 3, green) subclades which are strictly separated. Each of the analyzed monocot species maize, rice, sorghum and brachypodium encodes five CslD genes. The five maize CslD genes have been previously designated CslD1 to CslD514. The rth6 gene corresponds to CslD5. Proteins encoded by monocot CslD genes form five groups in which each of the four species is represented by one protein. Typically, clusters of monocot CSLD proteins group with clusters of dicot CSLD proteins. Even evolutionary distantly related plant species such as the moss Physcomitrella patens or the clubmoss Selaginella moellendorffii encode for CSLD proteins with a unexpectedly high degree of sequence identity of 67–68% with RTH6 of maize. No homologs were identified in green algae such as Chlamydomonas reinhardii.

Figure 3: Phylogenetic reconstruction of the CSLD subfamily of Cellulose Synthases.
figure 3

Dicot species: blue, monocot species: red, non-seed plants: green. Posterior probabilities are indicated at the branching points.

Root-type and tissue specific expression of rth6

Expression of rth6 was surveyed in a wide range of tissues and root types by qRT-PCR (Fig. 4). In primary roots of different lengths rth6 displayed the highest expression in young primary roots of 1–2 cm and 2–4 cm, while significantly less expression was detected in older primary roots of 4–8 cm and 10–14 cm length (Fig. 4A). Lateral roots displayed similarly high expression levels as young primary roots, whereas seminal and crown roots showed lower expression levels similar to older primary roots (Fig. 4A). Expression of rth6 in leaves as an example for non-root tissues, was significantly lower than in most root tissues (Fig. 4A).

Figure 4: Expression of rth6.
figure 4

Expression of CslD1 (white bars), CslD2 (grey bars) and CslD5/rth6 (black bars) in (A) primary roots (PR) at different developmental stages, seminal roots (SR), crown roots (CR), lateral roots (LR) and leaves, (B) in the meristematic zone (MZ), elongation zone (EZ), cortex (C), stele (S) and root hairs (RH) of 2–4 cm primary roots. (C) Expression of rth6 in 2–4 cm primary roots of the mutants rth1, rth2, rth3, rth5 and rth6 and their wild-type (WT) siblings. Bars indicate mean relative expression ±SD (n = 4, ten plants per biological replicate). Different letters in (A) and (B) indicate significance levels at p ≤ 0.05 after ANOVA. Small normal letters: CslD1; small italics letters: CslD2; capital letters: rth6/CslD5. No differential expression was found for CslD2 in (A). (C) Student’s t-test (**p ≤ 0.01; ***p ≤ 0.001).

Primary roots of 2–4 cm length were then dissected longitudinally into the meristematic zone (MZ), the elongation zone (EZ) and the differentiation zone. The differentiation zone was mechanically dissected into the cortical parenchyma (C) comprising all cell types between epidermis and endodermis and the stele (S). Finally, root hairs (RH) of the differentiation zone were collected separately. Root hairs displayed significantly higher rth6 expression than all other tissues. Expression in elongation zone and cortical parenchyma could be attributed to trichoblasts present in these tissues (Fig. 4B).

Finally, rth6 expression was monitored in primary roots of 2–4 cm length in wild-type and mutant rth1, rth2, rth3, rth5, and rth6 seedlings (Fig. 4C). Expression of rth6 in mutant primary roots was on average reduced to 6% of the expression levels in wild-type primary roots. Moreover, rth6 expression was reduced in roots of the mutants rth3 and rth5 and significantly up-regulated in the mutant rth2. Expression of rth6 was unaffected in the mutant rth1. Among the five closely related CslD genes of maize only CslD1, CslD2 and CslD5 (rth6) were expressed in roots (Fig. 4A). While, for instance CslD2 displayed similar expression in older primary roots, seminal roots and crown roots as did rth6 (Fig. 4A), rth6 was the only CslD gene that displayed highly specific expression in root hairs (Fig. 4B).

Discussion

Root hair length in maize rth6 mutants is reduced to 4–5% of wild-type seedlings in all root types including embryonic primary and seminal and postembryonic shoot-borne roots. Similarly, the maize mutants rth111, rth224, rth313 and rth510 also constitutively display defects in root hair formation in all root types. In contrast, other aspects of maize root development such as lateral root formation are controlled by root-type specific genetic programs. This is illustrated by the mutants rum125,26 and lrt127. In both mutants only embryonic primary and seminal roots are defective in lateral root initiation while this process is not impaired in postembryonic shoot-borne roots.

The maize roothairless mutants identified thus far are affected at different stages of the three-step process of root hair development1. Both, the rth3 mutant13 and the rth6 mutant characterized in the present study can form a bulge but are unable to initiate root hair elongation. In contrast, the rth5 mutant is impaired in cell wall loosening at the root hair tip for subsequent turgor driven tip growth10. Therefore, rth5 forms a bulge and initiates tip growth but ceases elongation soon after. Finally, the mutants rth111 and rth224 display the longest root hairs of all identified maize roothairless mutants. In both mutants root hairs initiate polar tip growth and elongate to a certain extent, but their overall final length lags significantly behind their wild-type siblings. This diversity of root hair mutant phenotypes illustrates the subtle multi step genetic regulation of this developmental process in maize.

Molecular cloning revealed that rth6 encodes CSLD5 of the Cellulose synthase like D (CSLD) protein family14. Mutants of several members of this gene family including maize csld514, rice csld122 and Arabidopsis csld3/kjk20,21, and csld228 have been demonstrated to be defective in root hair elongation. RTH6 is predicted to contain a C-terminal cellulose synthase domain and eight transmembrane domains. Based on shared sequence identity, all members of the cellulose synthase superfamily are predicted to be membrane bound processive glycosyltransferases that synthesize b-linked glycan polymers such as cellulose or hemicellulose backbones found in cell walls29. Glucan chains are synthesized at the plasma membrane by cellulose syntheses complexes to be extruded and deposited at the inside of the cell wall15,30. Evidence that CSLD proteins indeed act as cellulose synthases was provided by the complementation of the Arabidopsis csld3 mutant by a chimeric CSLD3 protein containing a CESA domain known to catalyze cellulose synthesis31. The N-terminal RING/Ubox Zinc-finger-like domain predicted in RTH6 is specific for the CSLD and CESA subfamilies of Cellulose Synthases29. This domain was suggested to mediate protein-protein interactions32,33.

Several members of the CSLD gene family have been functionally characterized and it has been demonstrated that these genes are involved in the tip growing processes. For example, AtCslD1 and AtCslD428, have been shown to be involved in pollen tube growth. Moreover, AtCslD2 and AtCslD3/kjk have divergent and redundant functions in in root hair development and female gametophyte development34. Finally, ZmCSLD1 is involved in the establishment of new cross walls during cell division35.

Despite the high degree of sequence conservation on the amino acid level, mutations in different members of the CSLD family result in morphologically different root hair phenotypes. For instance, the maize mutant rth6 (csld5) and Arabidopsis csld3/kjk display very short root hairs which are arrested shortly after initiation and are unable to elongate after bulge formation. In contrast, root hairs in the rice mutant csld1 are initiated normally but their elongation is impaired relatively late in development and root hairs display kinks and swellings along their length22. Hence, despite the fundamental structural differences in type I (Arabidopsis) and type II (maize and rice) cell wall compositions16 these closely related CSLD proteins have similar functions in root hair formation.

CSLD proteins belong to one of ten subfamilies of the highly conserved cellulose synthase superfamily14. The high degree of evolutionary conservation of this subfamily is supported by the observation that early land plants such as the clubmoss Selaginella and the moss Physcomitrella contain CslD genes (Fig. 3). Selaginella belongs to the oldest living vascular plant division Lycopodiophyta which emerged ~410 million years ago. Phylogenetic reconstruction revealed that monocot, dicot, and non-seed-plant subclades are strictly separated which might illustrate that diversification of the gene family mainly occurred along the boundary of monocot, dicot, and non-seed plant species (Fig. 3). Therefore, a one-to-one correlation of monocot and dicot CSLD proteins is difficult although it has been demonstrated that monocot and dicot members of closely related clades can have similar functions as illustrated above for the monocot genes rth6 (ZmCsld5) and OsCSLD122 and the dicot genes AtCSLD228 and AtCSLD3/KJK20,21 in root hair development.

Root hair specific expression of rth6 and the visible mutant phenotype implies that rth6 has only limited functional redundancy with other members of the maize CslD family. Similar root hair specific expression and visible root hair defective mutant phenotypes have been observed for the rice OsCslD122 and maize rth5, which encodes a NADPH oxidase10, also implying limited functional redundancy with other members of these gene families. For the Arabidopsis AtCSLD2 and AtCSLD3 proteins, partial redundancy has been observed because double mutants of these genes display even shorter root hairs than the single mutants28.

Based on their low (CslD2) to absent (CslD1, CslD3, CslD4) expression in root hairs, the other four members of the maize Cellulose synthase-like D subfamily likely have other functions than controlling root hair formation. To date other than rth6 (ZmCslD5), only ZmCslD1 has been characterized by a mutant which is defective in cell division and expansion and therefore displays a significantly reduced width of several organs including leaves14,35.

A comparative expression survey of rth6 transcripts in wild-type versus known maize roothairless mutants revealed that the rth2, rth3 and rth5 genes are differentially expressed in wild-type versus mutant rth6 primary roots. While the rth2 gene has not yet been cloned, functional links between rth3, rth5 and rth6 can be established. In a comparative RNA-Seq analysis of wild-type versus mutant rth5 roots only two GO terms were enriched10. In addition to “oxidation/reduction” which included some peroxidases which likely act downstream of RTH5 and facilitate the loosening of the elongating root hairs, the GO subgroup “cellulose biosynthesis” was overrepresented. Cellulose biosynthesis follows peroxidase mediated cell wall loosening10. Similarly, rth313 and rth6 are functionally linked by secondary cell wall formation. Secondary cell wall formation is a two-step process of synthesis and organization36,37. The rth3 gene encodes a COBRA-like cell wall protein13. COBRA (COB) has been identified as a putative regulator of cellulose synthesis38. Recently, it has been suggested in Arabidopsis that COBRA and the cellulose synthase complex reside in close proximity on the plasma membrane and that COBRA facilitates cellulose crystallization from the emerging β1-4-glucan chains by acting as a “polysaccharide chaperone”39. Consistent with these suggested functions, RTH6 synthesizes cellulose at the plasma membrane of the root hair tips and thus reinforces the tubular shaft, while RTH3 is involved in the organization of the synthesized cellulose. Hence, defects in either of both processes lead to non-functional cell walls which explains the highly similar phenotypes of rth3 and rth6 mutants. The functional relationship of RTH3, RTH5 and RTH6 has been summarized in the model in Fig. 5.

Figure 5: Model of the functional link of RTH3, RTH5 and RTH6 in root hair formation in maize.
figure 5

RTH5 produces apoplastic superoxide, which results in cell-wall loosening via hydroxyl radicals and also controls the expression of cellulose biosynthesis genes10. After cell wall loosening, the transmembrane protein RTH6 is arranged in rosettes and synthesizes cellulose at the plasma membrane47 which is extruded to the inner side of the cell wall in the root hair tip and thus reinforces the tubular shaft, while the GPI-anchored COBRA-like cell wall protein RTH313 is involved in the organization of the synthesized cellulose. Glc: Glucose.

Methods

Isolation of the reference allele rth6-1

The mutant rth6 was initially identified by screening segregating F2-families derived from Mu active lines of the collection at Pioneer-Hybrid. The reference allele was designated rth6-1 (Schnable Lab Ac #: 1351) and backcrossed into the inbred line B73 >8 times.

cSEM imaging

Wild-type and rth6 mutant seeds for cSEM (cryo scanning electron microscopy) were germinated for 3–4 days. Seedling roots were cut into 1–2 cm pieces with a razor blade and mounted on a specimen holder with a mixture of Tissue-Tek® O.C.T.™Compound (Sakura Finetek Europe B.V., Alphen aan den Rijn, Netherlands) and colloidal graphite (Agar Scientific, Stansted, UK) and were immediately frozen in a nitrogen slush. Specimen were then transferred into a Quorum PP3010T cryo preparation chamber (Quorum Technologies, Laughton, UK) at −140 °C the specimen holder was heated to −80 °C for 40 min were water was sublimated. Subsequently, specimen were platinum sputtered at 10 mA for 60 sec and imaged in a Zeiss SIGMA VP cryo scanning electron microscope (Zeiss, Oberkochen, Germany). Images were taken at a magnification of 100x, 1,600x and 16,000x.

BSR-Seq mapping

A line carrying the rth6-1 allele backcrossed for five generations into the inbred line B73 was crossed with the inbred line Mo17 and subsequently self-pollinated to generate multiple F2-families. Kernels from one of the resulting F2-families that were segregating for the rth6-1 allele were rolled up in water-soaked germination paper (Anchor paper, Roseville, MN, USA) and placed in a 10 L bucket filled with ca. 2 L of distilled water and incubated at 25 °C in dark. Subsequently, 3 cm primary roots were harvested from both the rth6 mutants and their wild-type siblings. In total, 123 mutant and 123 wild-type individuals were collected and separately pooled according to their phenotypes. RNA was extracted separately from each pool with the RNeasy mini kit (Qiagen, Hilden, Germany) and subsequently subjected to a DNaseI treatment as per the manufacturer’s protocol. RNA quality (RIN > 8) was checked on a Bioanalyzer 2100 (Agilent, Santa Clara, CA, USA) using a RNA 6000 Nano chip. RNA-Seq libraries were constructed using the Illumina Truseq RNA-Seq sample preparation kit according to the manufacturer’s protocol. Two different Illumina TruSeq barcodes were used for the two libraries24. The libraries were pooled and sequenced on an Illumina HiSeq2000 (Illumina, San Diego, CA, USA) sequencer, generating 99 bp single-end reads, which were analyzed as previously described24. Briefly, the two alleles of a given SNP site should be detected in approximately equal numbers of RNA-seq reads when considering both pools of RNA-seq reads. In contrast, only one allele of a SNP that is completely linked to the causal gene should be present in the RNA-seq reads from the mutant pool. Hence, linkage probabilities of each SNP with the causal gene were calculated and plotted versus the physical position of the gene. Subsequently, chromosome 1 was scanned by using a chromosome window containing 100 SNPs and the median linkage probability was plotted versus the middle physical position of the window. The window was slid with a step size of 20 SNPs. Sequence reads from the BSR-Seq experiment have been deposited in the SRA (sequence read archive) under AC: SRP044758.

Seq-Walking

A Seq-Walking library was generated from genomic DNA extracted from 24 mutant seedlings obtained via the self-pollination of a mutant plant with the genotype rth6-1/rth6-2. The isolated DNA was sheared by a BioRuptor-UCD-200 (Diagenode, Denville, NJ, USA) sonication system with 15 s/30 s on/off cycles at low speed. The library was prepared as described previously24 and sequenced on an Ion Proton system (Life Technologies, Grand Island, NY, USA). As a control, Seq-Walking was also conducted on DNA isolated from the inbred line B73. The Seq-Walking library was prepared using the itp-Mu8 (GTCGAT) barcode, while the itp-Mu31 (CTGCTA) barcode was used for B73 library generation. Other primers used for Seq-Walking library preparation have been published previously23.

Confirmation of the rth6 candidate gene by independent transposon insertion alleles

Novel Mutator insertions in the rth6 gene were generated by a direct transposon-tagging experiment in which plants homozygous for the rth6-1 allele were crossed as males with Mu-active stocks. Three novel alleles rth6-2 (rth6-Mu 10B-668), rth6-3 (rth6-Mu 11B-451) and rth6-4 (rth6-Mu 11B-453) were identified in a forward genetic screen for roothairless phenotypes among ~94,000 seeds of the resulting progeny. Mutant progeny were self-pollinated and in parallel crossed with plants homozygous for rth6-1 to validate the new mutant alleles. Moreover, two Ac/Ds insertion alleles rth6-5 (Plant GDB Ac#: Ac.mon00102; Schnable Lab Ac#: 5972) and rth6-6 (Plant GDB Ac#: Ds I.S07.1244A; Schnable Lab Ac#: 5971) were obtained from Plant GDB (http://www.plantgdb.org/prj/AcDsTagging/v2/genes.php) by reverse genetic analysis. All Mutator and Ac/Ds insertion sites were mapped by PCR and subsequent sequencing using transposon-specific oligonucleotide primers in combination with the rth6 specific oligonucleotide primers listed in Table S2.

qRT-PCR

For quantitative real time PCR, seedlings of the maize inbred line B73 plants were grown for three to ten days in germination paper rolls (Anchor Paper) as previously described40 under a 16 h light/8 h dark photoperiod at 28 °C and 24 °C, respectively. Subsequently, roots of ten plants were collected for each of the four biological replicates per tissue or developmental stage and immediately frozen in liquid nitrogen. Furthermore, four different tissues of young primary roots were collected. The meristematic zone comprising the first two mm of the root tip and the proximal elongation zone were cut with a razor blade under a stereo microscope (Zeiss Stemi 2000, Zeiss). The differentiation zone which was distinguished from the neighboring elongation zone by the presence of root hairs was separated into cortical parenchyma and stele tissues as previously described41. For each root hair sample, 100–150 primary roots of three-day-old seedlings were dipped into liquid nitrogen. Subsequently, frozen root hairs were broken off the primary root using a pre-cooled spatula and collected in a mortar where they were pulverized in liquid nitrogen using a pestle. Total RNA was extracted with the RNeasy kit (Qiagen). RNA integrity was measured using an Agilent 2100 Bioanalyzer and a RNA 6000 Nano chip (Agilent Technologies Inc., Santa Clara, USA). RIN values for all samples were >9.5. cDNA was synthesized from 1 μg of total RNA using the Quanta qScript™ cDNA SuperMix (Quanta, Gaithersburg, MD, USA). The cDNA was 1:2 diluted with water and a dilution series was prepared up to 1:128. Each biological replicate was measured in a BioRad CFX 384 Real-Time System (Biorad, Hercules, CA, USA) in three technical replicates using the Quanta PerfeCTa® SYBR® Green SuperMix (Quanta). Primer efficiencies were calculated using the following formula: PCR amplification efficiency = 10−1/slope − 142. Primer efficiencies were between 85% and 105% and R2 was >0.995. Expression levels were calculated relative to a homolog of a myosin heavy-chain gene (GenBank accession AI941656) previously used as a reference for expression in maize roots43.

Phylogenetic analysis

The predicted amino acid sequence of RTH6 was compared via tblastn against the translated nucleotide databases of C. reinhardii, P. patens, S. moellendorffii, A. thaliana, G. raimondii, M. domestica, P. trichocarpa, C. sativus, S. bicolor, B. distachyon, Z. mays and O. sativa from the Phytozome 10.1 plant genomics portal (http://phytozome.jgi.doe.gov/pz/portal.html). Homologous sequences were downloaded and aligned using ClustalW with a gap opening penalty of 10 and gap extension penalty of 0.1 using MEGA 644. Alignments were exported into a NEXUS file and trees were generated by MrBayes45,46. The tree was calculated using a Markov Chain Monte Carlo approach and three hot chains and 5 million generations until the standard deviation of split frequencies dropped below 0.01. The phylogenetic tree was built using Fig Tree software (http://tree.bio.ed.ac.uk/software/figtree/).

Additional Information

How to cite this article: Li, L. et al. Characterization of maize roothairless6 which encodes a D-type cellulose synthase and controls the switch from bulge formation to tip growth. Sci. Rep. 6, 34395; doi: 10.1038/srep34395 (2016).