Macroevolutionary, palaeoecological and biomechanical analyses in deep time offer the possibility to decipher the structural constraints, ecomorphological patterns and evolutionary history of extinct groups. Here, 3D comparative biomechanical analyses of the extinct giant early amphibian group of stereospondyls together with living lissamphibians and crocodiles, shows that: i) stereospondyls had peculiar palaeoecological niches with proper bites and stress patterns very different than those of giant salamanders and crocodiles; ii) their extinction may be correlated with the appearance of neosuchians, which display morphofunctional innovations. Stereospondyls weathered the end-Permian mass extinction, re-radiated, acquired gigantic sizes and dominated (semi) aquatic ecosystems during the Triassic. Because these ecosystems are today occupied by crocodilians and stereospondyls are extinct amphibians, their palaeobiology is a matter of an intensive debate: stereospondyls were a priori compared with putative living analogous such as giant salamanders and/or crocodilians and our new results try to close this debate.
Stereospondyls are the most successful clade of temnospondyls which quickly radiated after the end-Permian mass extinction and acquired gigantic sizes (1–6 meters long) during the Triassic1. These non-amniotic tetrapods were secondarily (semi) aquatic, carnivorous and very abundant in freshwater, coastal and even marine environments. Morphologically, they are characterized by a flattened skull with raised orbits, a small or absent hyobranchial apparatus but a well-developed musculature (i.e., very elongated anteriorly adductor and large depressor) and labyrinthodont teeth2,3,4. These characters, particularly dentition, possibly played a role in the feeding strategy: stereospondyls had conical teeth with folded dentine (plicidentine) and enamel, as well as large fangs that probably helped to catch preys5. This pattern is different than the thecodont dentition of crocodiles but also from the pedicellate teeth found in living salamanders.
Stereospondyls were a near-ubiquitous component of the (semi) aquatic ecosystems and the second most important group, after therapsids, in terms of Triassic biodiversity and abundance6,7. Nonetheless, their palaeobiology is still much debated: they have been historically disputed as bottom dwellers, ambushers or active predators3,5,8,9,10,11,12,13,14,15. Clades as rhytidosteids or derwentiids are considered as small predators in rivers13, while all further advanced stereospondyls are inferred as active swimmers in rivers, ambushers living in a broad range of habitats, or active predators present in brackish swamps, estuarines and large river deltas13. Stereospondyls are a priori compared either with living giant salamanders based on their amphibian systematics or with living crocodilians based on their analogous morphology2,14. To shed light on this debate, two well-known stereospondyls (Edingerella madagascariensis and Stanocephalosaurus birdi) were analysed. These two taxa have been chosen because they represent medium and large-sized taxa from the Early and Middle Triassic of Madagascar and North America respectively and their cranial general shape is of particular interest to analyse the potential convergence with crocodiles. Their ecological position(s) has therefore been tested for the first time by comparing them to the living crocodile Alligator mississipiensis and the giant salamander Dicamptodon ensatus and by using 3D Finite Element models. Adult skulls of Stanocephalosaurus and Edingerella were 3D modeled simulating three different biomechanical behaviours: bilateral and unilateral biting/prehension and a lateral biting/prehension, simulating a rapid sideways sweep of the head (see Methods, Table 1). Their skull models were scaled and compared with the two living models of Dicamptodon and Alligator. A Principal Component Analysis (PCA) was used to analyse the response of the stress levels in a multivariate framework using as variables the stress values recorded at different homologous points in each model.
Overall, the aim of this study is i) to understand the ecological position, biomechanical capabilities, phylogenetical and structural constraints of Triassic stereospondyls and ii) to decipher their evolutionary history compared with modern taxa.
The estimated bite force that acted on the prey is recorded for the bilateral and unilateral cases as the force reaction that appears during the bite (Supplementary Table S1). The stresses distributions and values are recorded for each skull in order to compare their behaviour under the effect of the loads and constraints as defined for the different cases (Table 1). Numerical values of stress are recorded in different locations (Supplementary Tables S2–S4). Results for the Triassic tetrapods are below presented, while the results for the extant taxa are described in the Supplementary Data.
The analyses of Edingerella madagascariensis and Stanocephalosaurus birdi reveal similar patterns, but the stress levels in S. birdi are slightly higher than those of E. madagascariensis. These differences are probably due to the cranial morphology of the two taxa: S. birdi has more elongated preorbital region and choanae and a slender cultriform process than E. madagascariensis14,16,17.
When a bilateral biting is simulated and scaled using the lissamphibian and the crocodilian parameters in E. madagascariensis and S. birdi (Fig. 1, Supplementary Video S1), the maximum stress peaks around the orbits, interorbital region, mainly around the frontals and postfrontals and surrounding bones. The main difference between the two scaled results refers to the levels of stress: the lissamphibian scaled results present the highest level of stress, while the crocodilian scaled results are the lowest ones, revealing that, from the same feeding behaviour but different structural conditions for the Triassic stereospondyls, the lissamphibian scaling has weaker capabilities in front of the rest of the crocodilian scaling or the non-scaled results. Otherwise, the general stress in both scaled cases reveals similar patterns: moderate stress levels present around the maxilla and nasals, as well as in the parietals.The stress increases around the orbits and in the posterior part of the skull (Fig. 1), excluding the tabulars, posterior part of the squamosal and quadratojugal. Similar stress patterns are observed in the palate, with moderate levels of stress around the vomerine plate, posterior ramus of the pterygoid, parasphenoid, exoccipitals and occipital condyles, while no stress is present in the cultriform process, anterior ramus of the pterygoids, quadrates and quadratojugals.
Considering the same bilateral bite under non scaled models (see Methods, Supplementary Fig. S1), the Triassic temnospondyls reveal two important regions of stress: the main area included the maxilla-nasal bones and the vomerine region, while the parietal-postparietal bones and the occipital condyles region also show moderate-high stress levels. Noteworthy, in E. madagascariensis, the interorbital region also has moderate-high stress levels, while in S. birdi, the interorbital region has low stress levels due to its more elongated skull, causing a stress belt around the prefrontals and frontals not found in Edingerella (Supplementary Fig. S1). The maxilla and especially the central part of the nasals present important stresses while this stress is also reflected on the anterior part of the vomerine plate. Low levels of stress are present on the preorbital-narial region, increasing around the orbits.
The postorbital region has moderate levels of stress. On the contrary, the tabulars, the posterior part of the squamosal and the quadratojugals present very low levels of stress. In palatal view, moderate levels of stress are present on the anterior ramus of the pterygoids and parasphenoids and especially on the exoccipitals and occipital condyles. Regarding the unilateral bite in both temnospondyls, when the unilateral case is scaled using the lissamphibian and crocodilian conditions (Fig. 2, Supplementary Video S2), stresses highly increase around the maxilla-vomerine plate and at the quadratojugal-squamosal-supratemporal-postparietal and parasphenoid-exoccipital regions. For the rest of the skull, moderate-low levels are mainly present on the interorbital and cheek regions, while the cultriform process of the parasphenoid presents very low levels of stress. On the other hand, under this unilateral biting and non-scaled models (see Methods, Supplementary Fig. S2), the stress levels recorded are slightly higher in comparison with the bilateral loading. In both taxa, the stress patterns are extremely similar to those found in the scaled cases.
Under a lateral strike of the skull, the analysis reveals that under both lissamphibian and crocodilian references (Fig. 3, Supplementary Video S3), the highest stress levels peak around the parasphenoid-exoccipital and quadrate regions, with moderate levels in the whole vomerine plate. Low stresses are present along the margin of the skull roof (jugals) and postorbital. The main difference between the lissamphibian and crocodilian model reference is on the level of stress; under a crocodilian scaled loading, the stress levels (especially on the vomerine plate and parasphenoid) are lower compared to the lissamphibian scaled and the non-scaled results (Supplementary Fig. S3), while the levels of stress are intermediate between the crocodilian and the non-scaled results. In the case of the non-scaled models, the stress distribution is very similar to the scaled ones.
A Principal Component Analysis (PCA) has been made for bilateral biting scaled under Alligator and Dicamptodon reference models in order to calculate the distribution of the variance. The result is that the variance distribution is similar (Fig. 4). In both cases, the first principal component (PC1) explains 61% of the variance, while the second (PC2) explains more than 30% of the variance. However, the loadings of the variables for each analysis are different (Supplementary Table S5). In the PCA based on the variables scaled under the Alligator reference model, on its positive extreme PC1 shows high loading for the stress at the condyle. PC2 shows that the stress level in the interorbital region is very important on its positive side (Fig. 4, Supplementary Table S5). On the other hand, when the models are scaled under the Dicamptodon reference, PC1 shows a high stress on the interorbital region on the positive side and high stress on the condyle on the negative side (Supplementary Fig. S4). Regarding the unilateral case, more than 95% of the variance is explained by PC1, therefore no other PCs are analysed (Supplementary Table S5). The same pattern is found under both reference models, showing that the positive side of PC1 represents a huge stress value at the condyles. Lastly, considering the lateral case (excluding D. ensatus), the results shows the same pattern than the unilateral case (Supplementary Fig. S4, Table S5), as the condyles overcome most of the variance in the sample.
The palaeoecology of temnospondyls is very discussed, particularly depending on the group and the methodology used (geometric morphometrics, histology, sedimentology, palaeoenvironmental reconstruction, etc.5,13,18,19,20). This is particularly the case of the stereospondyls, which are a priori considered as convergent with living crocodilians and/or giant lissamphibians. The results of the Finite Element Analysis reveal however that these giant stereospondyls have a peculiar ecological position, which differs from those of giant salamanders and crocodiles. In this sense, FEA and PCA results demonstrate that considering the amphibian nature of the Triassic giant temnospondyls, these animals occupied a different ecological niche than living giant salamanders or crocodiles (Fig. 4b). The phylogenetical and structural constraints calculated for the giant stereospondyls allow us to precise their evolutionary history. Our results also concern (a) their cranial structural pattern, (b) dentition and (c) evolutionary ecology.
(a) The cranial structural pattern of the studied taxa has an important role in the stress distribution pattern: the flat and broad skull of Dicamptodon has no stabilizing bony bridge between the maxilla and squamosal/quadrate, causing high stress distributions under different bite positions21. Its stress distribution pattern clearly differs from that of the large, flat and triangular skulls of the studied stereospondyls. Our results also confirm that these Triassic stereospondyls undergo a large amount of stress in the posterior part of the skull, particularly in the circumorbital and braincase regions (PCA, Fig. 4). On the contrary, the different cranial structures and the secondary palate of Alligator undergo less stress in the posterior cranial region. The amphibian (i.e., anamniotic) cranial structure is therefore considered as less adapted than the archosaurian/romorph cranial structure to the same loadings. It could explain the decline of the giant anamniotes from the Late Triassic, correlated with the rise of the crown archosaurs (particularly pseudosuchians) in the same aquatic ecosystems. We also confirmed that the cranial suture pattern plays an important role in the stress absorption and in the flexion and distribution of the stress, as suggested by previous studies15,21,22. The role of each suture depends on its position but also on its suture type (at least eight suture types were described in temnospondyls and other tetrapods such as archosaurs23,24). In archosaurs, peculiar structures such as sinuses and inner cavities have different biomechanical implications for the stress patterns25. Nonetheless, the Triassic stereospondyls do not show sinuses but a narrow air cavity between the vomerine plate and the skull roof that continues through the cultriform process of the parasphenoid. This cavity is particularly interesting, especially in the vomerine region, because it spreads and reduces the stress within the skull. However, the absence of a secondary palate avoids a general stress reduction, at least during unilateral biting, as present in neosuchians26. The results of our FEA demonstrate that the giant stereospondyls had a powerful direct bite, as in crocodilians and that this bite is stronger than the one of the studied giant salamanders. These stereospondyls may therefore prefer to use their powerful bite rather than their suction feeding system5 to catch preys. However, because of the high stress levels under this behaviour in the parasphenoid and braincase regions, these stereospondyls may not catch preys by rapid sideway sweeps of the head during active swimming, as crocodiles.
Our FEA and PCA also reinforce the importance of the occipital condyles during the different biomechanical behaviours: the stereospondyls present two occipital condyles (archosaurs have one) where the stress is concentrated in different cases (Fig. 4) and scapular elements (interclavicle and clavicles) close to the posterior part of the skull. This may limit rapid lateral movements of the head. The fact that the scapular elements are close to the skull implies that the clavicles play a key function in the skull-raising because the cleidomastoideus muscle is inserted from the dorsal process of the clavicle to the tabular horns10. This may explain why the tabular horns and the nearing otic notch region are generally well developed in stereospondyls, except in trematosaurians: in this group, the clavicles and the interclavicle are narrow and slender27 and located more posteriorly and the tabular horns and otic notch region less developed. This suggests a lower skull raising function but more rapid lateral movements of the head under an active swimming for the trematosaurians.
(b) Regarding the dentition, early amphibians generally possess haplodont, unicuspid and conical teeth, with large bases and subthecodont attachment28. In particular, temnospondyls are characterized by labyrinthodont teeth with an intricated plicidentine and enamel29. Tooth rows are present on the maxilla-ectopterygoid and vomerine, while in some clades such as stereospondyls, large fangs probably helped to catch preys5. This is not the case of living salamanders where adult individuals present pedicellate monocuspid or bicuspid teeth on the premaxilla and maxilla, while different tooth rows could be present on the vomer. In extant and possibly most extinct archosaurs, teeth are generally thecodont and continuously replaced, with a thin enamel, dentine and cementum. They are mainly used for holding preys30, as it may be the case in Triassic temnospondyls. However, in anamniotes, the functional significance of plicidentine is still unclear but may related to increase the surface area for attachment tissues, to absorb shock stress during feeding, or both, as proposed for parareptiles31.
(c) Based on the discussed points above, the evolutionary ecology of the stereospondyls may be composed of different ecomorphotypes, with a relatively flattened skull and a snout morphology varying from a tube (in lonchorhynchine trematosaurs) to a broad and short spatula (in metoposaurs). In archosaurs and neosuchians in particular, the flattening of the skull is related to the rostral shape, which shows two lateral morphotypes: platyrostral (flat-snouted) and oreinirostral (“hill-like snouted”)23,32. In stereospondyls and most of the temnospondyls, the lateral profile is only platyrostral and consequently less adapted to resist both bending and torsional forces. The fact that stereospondyls did not explore an oreinirostral morphotype probably limited their ecomorphological diversity, especially on land and may be linked to the absence of a secondary palate and the presence of a cultriform process which did not support important stress levels during most of the feeding behaviours.
Giant amphibians were abundant and dominant after the end-Permian mass extinction. They occupied many vacant ecological niches in continental and marine ecosystems of the Triassic. Archosauromorphs also survived the end-Permian extinction and radiated during the Triassic. Early Triassic archosauriforms (as proterosuchids) occupied terrestrial ecosystems while their diversity increases during the Middle Triassic with small-sized meso- and top predators such as poposauroids and “rauisuchians”. Later, during the Late Triassic ornitosuchids, early dinosaurs and early crocodylomorphs occupied these ecosystems33,34. Some archosauromorph groups developed morphofunctional innovations such as a secondary palate, which appeared in Early Jurassic neosuchians35. This secondary palate may increase their biomechanical capabilities and may correspond to an ecological advantage, in term of natural selection, compared with stereospondyls living in the same ecosystems. This is also suggested by the co-occurrence of metoposaurian temnospondyls and pseudosuchian phytosaurs in many non-marine Late Triassic localities around the world36,37. Even if their respective ecological niches seem differentiated, archosaurs and giant stereospondyls therefore shared the same non-marine environments during the Late Triassic. The latter decreased in biodiversity from the Early Jurassic, while various archosaurian clades increased in continental ecosystems probably linked to the niche expansion of archosaurs thanks to these key morphofunctional innovations.
University of California Museum of Paleontology, USA: UCMP; University of California Museum of Vertebrate Zoology, USA: MZV; Museu de Ciències Naturals de Barcelona, Catalonia, Spain: MZB; Muséum national d’Histoire naturelle, France: MNHN.
Four skulls were scanned and modeled under a Finite Element Analysis (FEA):
-UCMP 57749; complete adult skull of the capitosaurian stereospondyl Stanocephalosaurus birdi, type species of the genus, from the Early Triassic of North America (the genus is also known in the Early-Middle Triassic of Africa and Asia38,39.
-MNHN-MSNM V2992; complete adult skull of the capitosaurian stereospondyl Edingerella madagascariensis from the Early Triassic of Madagascar (the species is also documented by an ontogenetical series14,17).
-MVZ 69449; complete adult skull of the living Dicamptodon ensatus, giant Pacific salamander (the genus includes four species, three with a terrestrial adult stage, reaching a total length of 350 mm, with large heads and robust jaws). Dicamptodon ensatus is capable of eating large preys (e.g. mices) relatively to their body size40.
-MZB 92-023; complete adult skull of the living Alligator mississippiensis (this archosaurian genus also includes the Chinese A. sinensis). A. mississippiensis reaches 4 meters long and feeds on invertebrates and vertebrates (e.g. fishes, turtles, birds, mammals). This semiaquatic archosaurian represents a good model for biomechanics because many of its biological and anatomical aspects are well known (e.g., jaw adductor muscles, feeding functional morphology, ontogenetical diet shifts41,42).
The adult skulls of S. birdi, E. madagascariensis and A. mississippiensis were scanned at the Hospital Mútua de Terrassa (Catalonia, Spain) using a medical CT scanner Siemens Sensation 16. S. birdi was scanned at 140 kV and 300 mA, obtaining 0.449 mm of pixel size and an output of 512 × 512 pixels per slice with an interslice space of 0.3 mm. E. madagascariensis was scanned at 140 kV and 150 mA, obtaining 0.586 of pixel size and an output of 512 × 512 pixels per slice with an interslice space of 0.1 mm. A. mississippiensis was scanned at 120 kV and 200 mA, obtaining 0.586 mm of pixel size and an output of 512 × 512 pixels per slice with an interslice space of 0.5 mm. Dicamptodon ensatus (MVZ 69449) was scanned at the University of Texas, with the High-Resolution X-ray Computed Tomography Facility-Digital Morphology Group (www.digimorph.org) and using an ACTIS CT scanner. The skull of D. ensatus was scanned at 120 kV and 0.2 mA, obtaining 89 μm of voxel size and an output of 1,024 × 1,024 pixels per slice.
The CT data of each scanned model was imported to the software Avizo 7.0 (FEI-VSG company), where a reconstruction and segmentation was performed for the 3D models of S. birdi, D. ensatus and A. mississippiensis (Supplementary Figs S5 and S6). The digital 3D models were converted to a CAD format. The presence of irregularities in the surface of the reconstructed models is due to the quality of the CT scans and was repaired using refinement and smoothing tools.
In E. madagascariensis, additional refinements were required to obtain the final CAD model (Supplementary Fig. S6). Inner regions, as the internal area between the vomer and the skull roof bones, the endocranial region and the inner part of the cultriform process were reconstructed using a previous 3D model for this taxon20.
A Structural Static Analysis of each skull was performed using the Finite Element Package ANSYS 14.5 in a Dell Precision™ Workstation T7600 with 32 GB (4X8GB) and 1600 MHz.
The cranial bone properties for living salamanders or any other anamniote are unknown but are well known for different reptile groups. To facilitate comparisons between the models, elastic, lineal and homogeneous material properties were assumed using the following values: E (Young’s modulus): 6.65 GPa and m (Poisson’s ratio) 0.35 of Currey43. However, Gil et al.44 demonstrated that, in a comparative analysis of different FEA models, the latter value is not crucial. In this study, the interest of the comparison between the models raises in the Von Mises stress distribution. Bone can be assumed as brittle45 or ductile46 material. According to Doblare45, the Von Mises criterion is the most used and useful criterion for predicting the yield and fracture location in bone when isotropic material properties and ductile material is assumed in cortical bone.
The skulls were meshed with an adaptive mesh using hexahedral elements47 with the following parameters: S. birdi about 1.8 millions of elements and 2.6 millions of nodes; E. madagascariensis about 2.1 millions of elements and 2.9 Millions of nodes; D. ensatus about 3.2 millions of elements and 4.5 millions of nodes; and A. mississippiensis about 3 millions of elements and 4.4 millions of nodes (Supplementary Fig. S5).
Boundary and loading conditions
The adductor musculature was modelled using the trigeminal topological paradigm48 as the criteria to identify muscle homology. The Adductor mandibulae internus (AMI), the Adductor mandibulae externus (AME) and the Adductor mandibulae posterior (AMP) were considered (Table 1, Supplementary Fig. S6). The musculoskeletal anatomical reconstruction in extinct taxa is particularly difficult because data are missing. The reconstruction of soft tissues in fossil taxa is mainly based on the attachments of the musculature preserved in bones and requires to be inferred using a phylogenetic approach as the extant phylogenetic bracket49. Herein, we present first an overview of the adductor musculature for the living taxa analysed, in order to discuss the digital reconstruction of the adductor musculature in the extinct taxa analysed.
The AMI is divided into pseudotemporalis and pteygoideus among tetrapods41,50,51. In lissamphibian urodeles, it originates from the fasciae of the epaxialis musculature and more anteriorly from the parietal, frontal and nasal regions. Its fibers run ventrally to insert slightly anterior to the insertion site of the AME on the mandible52. In crocodilians, the pseudotemporalis is less developed and herein not considered. The pterygoideus muscles occupy important regions of the head: this is particularly the case of the pterygoideus dorsalis, which occupies the dorsal surface of the palate and suborbital space, with attachments on the dorsal surface of the palatine, pterygoid, ectopterygoid, the ventral surface of the interorbital septum, the ventrolateral surface of the lacrimal, the dorsomedial surface of the maxilla/ectoptergyoid articulation and the suborbital fenestra. This muscle also runs in different directions; caudally through the postnasal fenestra and attaches to the ventromedial surface of the angular and articular, ventrally through the jaw joint with the ventromedial edge of the medial mandibular fossa and caudally through the pterygoid flange41,53.
The AME is large and undivided in the lissamphibian urodeles. It originates typically from the anterior part of the squamosal, runs ventrally and inserts on the coronoid part of the mandible50,52. In crocodilians, it is the most functionally muscle and is usually partitioned into various sections; superficial (M. adductor mandibulae externus superficialis), medial (M. adductor mandibulae externus medialis) and deep (M. adductor mandibulae externus profundus). It also occupies most of the temporal fossa and lateral region of the adductor chamber and has broad attachments to the dorsotemporal fossa and medial surfaces of the laterally bounding dermocranium (postorbital, squamosal). AME origins on the ventrolateral surface of the parietal, the rostromedial surface of the quadrate and the rostrolateral surface of the quadrate and quadratojugal41,53.
The AMP is a small and poorly differentiated muscle in lissamaphibian urodeles50,54. It is included with AME in the Dicamptodon ensatus model. In crocodilian archosaurs, the AMP represents one of the larger adductor muscles. It originates on the rostral surface of the quadrate and inserts on the medial region of the mandible, occupying most of the medial mandibular fossa. In this fossa, the AMP attaches on the dorsal surface of the angular, the rostral surface of the articular and the medial surface of the dermis, overlying the external mandibular fenestra41,53.
In early tetrapods, such as temnospondyls, attempts of reconstruction of the cranial musculature have been published50,55,56. In various temnospondyls (e.g., Dendrerpeton, plagiosaurids, stereospondyls), the Adductor Musculature Internus (AMI), Externus (AME) and Posterior (AMP) can be reconstructed thanks to well preserved fossil specimens showing insertion areas for the musculature: the insertion area of the AMI, reduced in some temnospondyls (incl. stereospondyls), is located on the ventral part of the postorbital bones nearing the orbit (postfrontal, postorbital and supratemporal)50,56 (Supplementary Fig. S6). The AME is inserted on the ventral part of the cheek region (squamosal) in stereospondyls, being more developed than that of the lissamphibian urodeles (Supplementary Fig. S6). The AME is placed adjacent to the AMP and this latter musculature is more developed than is found in lissamphibian urodeles50,56. Moreover, some temnospondyls (like plagiosaurids) present, in adult specimens, a well ossified hyobranchial skeleton probably performing a strong suction feeding56, while in other groups (like stereospondyls), the hyobranchial skeleton is unknown and probably was cartilaginous or reduced4.
Considering the described information on adductor musculature in living and extinct taxa, the muscular insertion areas of AMI, AME and AMP respectively were defined in the 3D geometric models in order to apply the forces of the muscular contraction during the prehension/bite (Supplementary Fig. S6).
Three loading cases were analysed considering a bilateral, unilateral and lateral prehension/bite. Lateral prehension simulation was not performed in D. ensatus because this behaviour has not been described in urodeles. The bilateral case simulates a bite on the left and right sides, while the unilateral case simulates a bite on the right side only. The lateral case simulates a lateral loading direction to generate a within-plane lateral bend to the snout. This simulates rapid sideways sweeps of the head through the water.
In D. ensatus, the prehension zone is located anteriorly, on the premaxilla-maxilla suture region, applying a fixed boundary condition. In A. mississipiensis, it is located at the level of the maxilla convexity, near the front of the jaws (upper caniniform teeth), where preys are initially captured57. In S. birdi and E. madagascariensis, it is located in the premaxilla-maxilla suture region. In all the cases, fixed boundary conditions in x, y and z directions were applied at the prehension zones. Displacements were fixed at the occipital condyles in the x-direction related with the vertebral column and at the jaw joint areas in y-direction, where the skull is in contact with the lower jaw to avoid rigid motion.
Scaling the models
To compare the performances of structures that differ in shape and size, the values of muscular contraction pressure were calculated according to the methodology developed by Marcé-Nogué et al.58 and rearranged for 3D models by Fortuny et al.21. This methodology relates the volume of each specimen with the muscular pressures applied by a 2/3 power relationship and agrees with the allometric proportions of the species59. To scale the muscular force, a reference model is necessary. As the goal is to analyse the ecological role of Triassic temnospondyls, the two extant taxa D. ensatus and A. mississipiensis (Crocodylia) were used as reference models:
In this manner, both models were scaled with respect to volume and using only the force values, as stated in equation (1), allowing the comparison between them.
And finally, the muscular pressure (P) of both models A and B were related with the variation of the volume (V) of the skull as equation (2) states in function of the area of muscular insertion (MI).
Cases of study
Ten cases of study were analysed according to the equations proposed to scale the models (Table 1). The values for the muscular pressure of AMI, AME and AMP after applying the scaling method were also included in the Table 1. A constant PCSA was assumed for these muscles, applying the muscular pressure directly to the area of its muscular insertion (MI) and considering that all muscles work simultaneously and maximally. The direction of the muscular forces was obtained from the virtual line that joins the centroid of the insertion areas of the skull muscles with its respective centroid in the lower jaw. Regarding the reference taxa, for A. mississippiensis, the muscular contraction force values were obtained from Gignac42 and applied according the directions proposed by Porro et al.60. The values of the areas of muscular insertion (MI) of A. mississippiensis were obtained directly from the geometrical model. For the studied amphibians (D. ensatus and the Triassic temnospondyls), comparative data on the muscular values in salamanders and amphibians in general are missing. Herein, we follow Fortuny et al.21 for the analysis of the Chinese Giant salamander, A. davidianus. The force production/potential of individual salamander jaw muscles is unknown. The values of the MI areas in D. ensatus were obtained directly from the geometrical model and a value of 0.3 MPa (force per unit area) was used as a contractile pressure in each muscle. This value, estimated from Alexander61, is considered as arbitrary for an isometric contraction of each adductor muscle. The values of the MI areas in D. ensatus were also obtained directly from the geometrical model, whereas the direction of the muscular forces were obtained from the virtual line that joins the centroid of the insertion areas of the skull muscles with its respective centroid in the lower jaw. The values of E. madagascariensis and S. birdi were scaled from the reference models. As explained above, the values of the MI areas were reconstructed and obtained directly from the geometric models. The gape angle used is of 30° for A. mississippiensis (following Porro et al.60), 15° for D. ensatus (following Fortuny et al.21) and 30° for E. madagascariensis and S. birdi (but also tested under 15°; Supplementary Table S1).
For the bilateral and unilateral bites and according to these values of reference, the values for the muscular contraction in cases E, F, G, H, I and J (Table 1) were obtained using equation (2). As previously explained, in D. ensatus, the AME and AMP are joined in the same insertion area. In cases A, C and D (Table 1), the constant value of 0.3 MPa is also assumed for all the muscles.
For the lateral bite, 100 N were assumed as a reference value for the bite force in A. mississippiensis. The lateral bite was not considered for D. ensatus. However, in the cases of the temnospondyls have been loaded under a lateral biting using D. ensatus as a reference model, a reference value of 1 N force was used. This change in the value is due to the different sizes of the reference models to generate low stress values. The scaled force in cases F, G, H, I and J (Table 1) was obtained using equation (1).
To analyse the response of the stress levels in different regions of the skull and in a multivariate approach, PCAs for each case and scale model were tested. These PCAs were developed using as variables the stress values recorded at different homologous points in each model and using the variables of all taxa. A PCA can also be based on the variance-covariance matrix of the original variables or using the correlation matrix. This last case is applied whenever the variables have different scales or units. However, as we are analysing the variability of the stress values and all the variables are in the same units, the variance-covariance option is here selected.
How to cite this article: Fortuny, J. et al. Comparative 3D analyses and palaeoecology of giant early amphibians (Temnospondyli: Stereospondyli). Sci. Rep. 6, 30387; doi: 10.1038/srep30387 (2016).
Schoch, R. R. Comparative osteology of Mastodonsaurus giganteus (Jaeger, 1828) from the Middle Triassic (Lettenkeuper: Longobardian) of Germany (Baden-Württemberg, Bayern, Thüringen). Stuttgarter Beitr. Naturk. Ser. B 278, 1–175 (1999).
Warren, A. A. In Amphibian biology, vol. 4 (eds. Heatwole, H. & Caroll, R. L. ). 1121–1149 (Surrey Beatty & Sons, 2000).
Fortuny, J., Marcé-Nogué, J., De Esteban-Trivigno, S., Gil, L. & Galobart, À. Temnospondyli bite club: ecomorphological patterns of the most diverse group of early tetrapods. J. Evol. Biol. 24, 2040–2054 (2011a).
Witzmann, F. Phylogenetic patterns of character evolution in the hyobranchial apparatus of early tetrapods. Earth Env. Sci. T. R. So. 104(2), 145–167 (2013).
Damiani, R. J. Cranial anatomy of the giant Middle Triassic temnospondyl Cherninia megarhina and a review of feeding in mastodonsaurids. Palaeontol. Afr. 37, 41–52 (2001).
Milner, A. R. In Major Evolutionary Radiations (ed. Taylor, P. D. & Larwood, G. P. ) 321–349 (Clarendon Press, 1990).
Damiani, R. J. Temnospondyls from the Beafourt Group (Karoo Basin) of South Africa and their biostratigraphy. Gondwana Res. 7(1), 165–173 (2004).
Watson, D. M. S. A new labyrinthodont (Paracyclotosaurus) from the Upper Trias of New South Wales. Bull. Brit. Mus. (Nat. Hist.) Geol. 3, 233–263 (1958).
Watson, D. M. S. The evolution of the labyrinthodonts. Phil. Trans. Roy. Soc. Lond. B 245, 219–265 (1962).
Howie, A. A. A new capitosaurid labyrinthodont from East Africa. Palaeontology 13, 210–253 (1970).
Chernin, S. & Cruickshank, A. R. I. The myth of the bottom-dwelling capitosaur amphibians. S. Afr. J. Sci. 74, 111–112 (1978).
Defauw, S. L. Temnospondyl amphibians: A new perspective on the last phases in the evolution of the Labyrinthodontia. Mich. Academician 21, 7–32 (1989).
Schoch, R. R. & Milner, A. R. Stereospondyli. In Handbuch der Paläoherpetologie, vol. 3B (ed. Wellnhofer, P. ) 1–203 (Munich, Pfeil, 2000).
Maganuco, S. et al. An exquisite specimen of Edingerella madagascarensis (Temnospondyli) from the Lower Triassic of NW Madagascar; cranial anatomy, phylogeny and restorations. Mem. Soc. Ital. Sci. Naturali Museo Civico Storia Naturale Milano 36, 1–72 (2009).
Fortuny, J., Marcé-Nogué, J., Gil, L. & Galobart, À. Skull mechanics and the evolutionary patterns of the otic notch closure in capitosaurs (Amphibia: Temnospondyli). Anat. Rec. 295(7), 1134–1146 (2012).
Welles, S. P. & Cosgriff, J. W. A revision of the labyrinthodont family Capitosauridae and a description of Parotosaurus peabodyi n. sp. from the Moenkopi Formation of Northern Arizona. Univ. Calif. Publ. Geol. Sci. 54, 1–148 (1965).
Steyer, J. S. A revision of the Early Triassic “Capitosaurs” (Stegocephali, Stereospondyli) from Madagascar, with remarks on their comparative ontogeny. J. Vert. Paleontol. 23, 544–555 (2003).
Mchugh, J. B. Paleohistology of Micropholis stowi (Dissorophoidea) and Lydekkerina huxleyi (Lydekkerinidae) humeri from the Karoo Basin of South Africa and implications for bone microstructure evolution in temnospondyl amphibians. J. Vert. Paleontol. 35(1), e902845 (2015).
Schoch, R. R. Life cycles, plasticity and palaeoecology in temnospondyl amphibians. Palaeontology 57, 517–529 (2014).
Marcé-Nogué, J. et al. 3D Computational mechanics elucidate the evolutionary implications of orbit position and size diversity of early amphibians. PLoS ONE 10(6), e0131320 (2015a).
Fortuny, J. et al. 3D Bite modeling and feeding mechanics of the largest living amphibian, the chinese giant salamander Andrias davidianus (Amphibia:Urodela). PLoS ONE 10(4), e0121885 (2015).
Bolt, J. R. Evolution and functional interpretation of some suture patterns in Palaeozoic labyrinthodont amphibians and other lower tetrapods. J. Paleontol. 48, 434–458 (1974).
Busbey, A. B. In Functional Morphology In Vertebrate Paleontology (ed. Thomason, J. J. ) 173–192 (Cambridge University Press, 1995).
Kathe, W. Comparative morphology and functional interpretation of the sutures in the dermal skull roof of temnospondyl amphibians. Zool. J. Linn. Soc.-Lond. 126, 1–39 (1999).
Witmer, L. M. The evolution of the antorbital cavity of archosaurs: a study in soft-tissue reconstruction in the fossil record with an analysis of the function of pneumaticity. Mem. Soc. Vert. Paleontol. 17, 1–73 (1997).
Rayfield, E. J. & Milner, A. C. Establishing a framework for archosaur cranial mechanics. Paleobiology 34(4), 494–515 (2008).
Steyer, J. S. The first articulated Trematosaur ‘amphibian’ from the Lower Triassic of Madagascar: Implications for the phylogeny of the group. Palaeontology 45(4), 771–793 (2002).
Davit-Béal, T., Chisaka, H., Delgado, S. & Sire, J.-Y. Amphibian teeth: current knowledge, unanswered questions and some directions for future research. Biol. Rev. 82, 49–81 (2007).
Warren, A. A. & Turner, S. Tooth histology patterns in early tetrapods and the presence of ‘dark dentine’. Trans. R. Soc. Edin. Earth Sci. 96, 113–130 (2005).
Enax, J. et al. Characterization of crocodile teeth: Correlation of composition, microstructure and hardness. J. Struct. Biol. 184, 155–163 (2013).
MacDougall, M. J., LeBlanc, A. R. H. & Reisz, R. R. Plicidentine in the Early Permian Parareptile Colobomycter pholeter and Its Phylogenetic and Functional Significance among Coeval Members of the Clade. PLoS ONE 9(5), e96559 (2014).
Brochu, C. A. Crocodylian snouts in space and time: Phylogenetic approaches toward adaptive radiation. Amer. Zool. 41, 564–585 (2001).
Zanno, L. E., Drymala, S., Nesbitt, S. J. & Schneider, V. P. Early crocodylomorph increases top tier predator diversity during rise of dinosaurs. Sci. Rep. 5, 9276 (2015).
Ezcurra, M. D. The phylogenetic relationships of basal archosauromorphs, with an emphasis on the systematics of proterosuchia archosauriforms. PeerJ 4, e1778 (2016).
Pritchard, A. C., Turner, A. H., Allen, E. R. & Norell, M. A. Osteology of a North American goniopholidid (Eutretauranosuchus delfsi) and palate evolution in Neosuchia. Am. Mus. Novit. 3783, 1–56 (2012).
Long, R. A. & Murry, P. A. Late Triassic (Carnian and Norian) tetrapods from the Southwestern United States. N. M. Mus. Nat. Hist. Sci. Bull. 4, 1–254 (1995).
Dzik, J. & Sulej, T. A review of the early Late Triassic Krasiejów biota from Silesia, Poland. Acta Palaeontol. Pol. 64, 3–27 (2007).
Dahoumane, A. et al. A new mastodonsauroid temnospondyl from the Triassic of Algeria: implications for the biostratigraphy and palaeoenvironments of the Zarzaitine Series, Northern Sahara. C. R. Palevol (In press, 2016).
Fortuny. J., Galobart, À. & De Santisteban, C. A new capitosaur from the Middle Triassic of Spain and the relationships within the Capitosauria. Acta Palaeontol. Pol. 56, 553–566 (2011b).
Wake, D. B. & Deban, S. M. In Feeding: form, function and evolution in tetrapod vertebrates (ed. Schwenk, K. ) 95–116 (Academic Press, 2000).
Holliday, C. M. & Witmer, L. M. Archosaur adductor chamber evolution: integration of musculoskeletal and topological criteria in jaw muscle homology. J. Morphol. 268, 457–484 (2007).
Gignac, P. Biomechanics and the ontogeny of feeding in the American Alligator (Alligator mississippiensis): Reconciling factors contributing to intraspecific niche differentiation in a large-bodied vertebrate. Electronic Theses, Treatises and Dissertations. Paper 4651 (2010).
Currey, J. D. The evolution of the mechanical properties of amniote bone. J. Biomech. 20, 1035–1044 (1987).
Gil, L., Marcé-Nogué, J. & Sánchez, M. Insights into the controversy over materials data for the comparison of biomechanical performance in vertebrates. Palaeontol. Electron. 18(1.12A), 1–24 (2015).
Doblare, M. Modelling bone tissue fracture and healing: a review. Eng. Fract. Mech. 71, 1809–1840 (2004).
Dumont, E. R., Grosse, I. R. & Slater, G. J. Requirements for comparing the performance of finite element models of biological structures. J. Theor. Biol. 256, 96–103 (2009).
Marcé-Nogué, J., Fortuny, J., Gil, L. & Sánchez, M. Improving mesh generation in Finite Element Analysis for functional morphology approaches. Spanish J. Palaeontol. 30(1), 117–132 (2015b).
Luther, A. Über die vom N. trigeminus versorgte Muskulatur der Amphibien, mit einem vergleichenden Ausblick über den Adductor mandibulae der Gnathostomen, und einem Beitrag zum Versändnis der Organisation der Anuranlarven. Acta Soc. Sc. Fennicae 44, 1–151 (1914).
Witmer, L. M. In Functional Morphology in Vertebrate Paleontology (ed. Thomason, J. ) 19–33 (Cambridge University Press, 1995).
Carroll, R. L. & Holmes, R. The skull and jaw musculature as guides to the ancestry of salamanders. Zool. J. Linn. Soc. Lond. 68, 1–40 (1980).
Duellman, W. E. & Trueb, L. Biology of amphibians (The Johns Hopkins University Press, 1994).
Heiss, E., Natchev, N., Gumpenberger, M., Weissenbacher, A. & Van Wassenbergh, S. Biomechanics and hydrodynamics of prey capture in the Chinese giant salamander reveal a high-performance jaw-powered suction feeding mechanism. J. R. Soc. Interface 10, 20121028 (2013).
Holliday, C. M., Tsai, H. P., Skiljan, R. J., George, I. D. & Pathan, S. A 3D Interactive model and atlas of the jaw musculature of Alligator mississippiensis. PLoS ONE 8(6), e62806 (2013).
Eaton, T. H. The myology of salamanders with particular reference to Dicamptodon ensatus (eschscholtz). I. Muscles of the head. J. Morphol. 60, 31–75 (1936).
Steyer, J. S., Boulay, M. & Lorrain, S. 3D external restorations of stegocephalian skulls using Zbrush: the renaissance of fossil amphibians. C.-R. Palevol. 9, 463–470 (2010).
Witzmann, F. & Schoch, R. R. Reconstruction of cranial and hyobranchial muscles in the Triassic temnospondyl Gerrothorax provides evidence for akinetic suction feeding. J. Morphol. 274, 525–542 (2013).
Erickson, G. M. et al. Insights into the ecology and evolutionary success of crocodilians revealed through bite-force and tooth-pressure experimentation. PLoS ONE 7(3), e31781 (2012).
Marcé-Nogué, J., DeMiguel, D., Fortuny, J., de Esteban-Trivigno, S. & Gil, L. Quasi-homothetic transformation for comparing the mechanical performance of planar models in biological research. Palaeontol. Electron. 16(3), 6T15 (2013).
Meers, M. B. Maximum bite force and prey size of Tyrannosaurus rex and their relationships to the inference of feeding behavior. Hist. Biol. 16(1), 1–12 (2003).
Porro, L. B., Holliday, C. M., Anapol, F., Ontiveros, L. C. & Ross, C. F. Free body analysis, beam mechanics and finite element modeling of the mandible of Alligator mississippiensis. J. Morphol. 272(8), 910–937 (2011).
Alexander, R. M. Exploring biomechanics animals in motion (New York Scientific American Library Distributed by W.H. Freeman, 1992).
We thank Pat Holroyd (UCMP), Ronan Allain (MNHN) and Javier Quesada (MZB) for the access and loan of the specimens under their care. Timothy Rowe, Jessie Maisano, Digimorph.org and NSF grant IIS-9874781 are acknowledged for the digital model of D. ensatus. J.F. visit collections were supported by grants from the SYNTHESYS Project (FR-TAF-435 and FR-TAF-3353 at MNHN and DE-TAF-5309 at MfN; http://www.synthesys.info/) and also by Welles Fund to the UCMP. J.F. is supported by the postdoc grant “Beatriu de Pinós” 2014–BP-A 00048 from the Generalitat de Catalunya. E.M. is supported by the predoc grant “PIF” from the Geology Department (UAB). We thank Hospital Mútua de Terrassa for the CT scanning. Caio Souto Maior is acknowledged for his help on the segmentation of the S. birdi specimen. Sonia Segura (UPC) for her support in designing the figures and Sergio Llacer (ICP) for his support on the video edition. This work has been supported by the Spanish Ministerio de Economía y Competitividad (project: CGL2014-54373-P).
The authors declare no competing financial interests.
About this article
Cite this article
Fortuny, J., Marcé-Nogué, J., Steyer, JS. et al. Comparative 3D analyses and palaeoecology of giant early amphibians (Temnospondyli: Stereospondyli). Sci Rep 6, 30387 (2016). https://doi.org/10.1038/srep30387
This article is cited by
Morphology and preliminary biomechanical interpretation of mandibular sutures in Metoposaurus krasiejowensis (Temnospondyli, Stereospondyli) from the Upper Triassic of Poland
Journal of Iberian Geology (2019)
Journal of Iberian Geology (2019)
Cranial anatomy of the Early Triassic trematosaurine Angusaurus (Temnospondyli: Stereospondyli): 3D endocranial insights and phylogenetic implications
Journal of Iberian Geology (2019)
Interrelationships, palaeobiogeography and early evolution of Stereospondylomorpha (Tetrapoda: Temnospondyli)
Journal of Iberian Geology (2019)
Cranial biomechanics in basal urodeles: the Siberian salamander (Salamandrella keyserlingii) and its evolutionary and developmental implications
Scientific Reports (2017)