Multilegged locomotion improves the mobility of terrestrial animals and artifacts. Using many legs has advantages, such as the ability to avoid falling and to tolerate leg malfunction. However, many intrinsic degrees of freedom make the motion planning and control difficult, and many contact legs can impede the maneuverability during locomotion. The underlying mechanism for generating agile locomotion using many legs remains unclear from biological and engineering viewpoints. The present study used a centipede-like multilegged robot composed of six body segments and twelve legs. The body segments are passively connected through yaw joints with torsional springs. The dynamic stability of the robot walking in a straight line changes through a supercritical Hopf bifurcation due to the body axis flexibility. We focused on a quick turning task of the robot and quantitatively investigated the relationship between stability and maneuverability in multilegged locomotion by using a simple control strategy. Our experimental results show that the straight walk instability does help the turning maneuver. We discuss the importance and relevance of our findings for biological systems and propose a design principle for a simple control scheme to create maneuverable locomotion of multilegged robots.
Legged locomotion is one of the versatile forms of mobility for terrestrial animals and artifacts. Locomotor behaviors differ in accordance with the number of legs. The use of many legs has advantages, such as the ability to avoid falling and to tolerate leg malfunction1,2,3,4. However, in the case of many legs, there are difficulties in motion planning and control due to the many intrinsic degrees of freedom and the dynamic interaction with diverse environments.
As an example, centipedes are arthropods that have a lot of legs. Although different species of centipedes have different numbers of legs, all have at least 15 pairs (some have 191 pairs) of legs as adults5,6. During centipede locomotion, many legs are in contact with the ground. The legs receive the reaction forces to support the body against gravity and produce propulsive and decelerating forces. This means that many legs must be physically constrained on the ground, and this constraint can impede their locomotion maneuverability. However, centipedes produce agile locomotion in diverse environments by using their many legs. The underlying mechanism for generating agile movements by using many legs remains unclear from biological and engineering viewpoints.
So far, to elucidate adaptive motor control in arthropods, biomechanical and physiological studies have measured the activities of their exoskeletal, muscular, and nervous systems during locomotion7,8,9,10,11,12,13,14,15,16. However, it is difficult to fully elucidate locomotion mechanisms solely from such measured data. To overcome the limitations of a single perspective, simple physical models17,18,19,20,21,22,23 and legged robots24,25,26,27,28,29,30,31 have recently been attracting attention. They can provide useful insight for biological systems and lead to a design principle for artifacts. In particular, to clarify the mechanism to create agile locomotion of cockroaches, Schmitt and Holmes32,33 developed a simple physical model composed of a planar rigid body and massless springy legs. Their model uses a control parameter for the root position of the legs to change the influence of the ground reaction force on the body dynamics. They showed that the stability of straight walking depends on the control parameter and the instability in straight walking helps the cockroach to make a quick turn during locomotion. Because the stability explains the capability to resist and recover from disturbances, performing a quick turn when the straight walk is unstable can change the walking direction more easily than performing the turn when the straight walk is stable. This means that straight walk instability contributes to turning maneuverability. Although their simplification of the physical model posed a limitation, the simulated locomotor behaviors captured the characteristics of straight walking and turning observed in cockroach locomotion. The results of this study, which suggested that cockroaches utilize the instability to improve turning mobility, provide a glimpse into motor intelligence in biological systems. However, centipedes have a much larger number of legs and a longer, more flexible body axis than cockroaches, and thus their turning strategies may differ.
In our previous work34, we developed a centipede-like multilegged robot composed of six body segments, each of which has a pair of legs. The body segments were passively connected through yaw joints with torsional springs. The robot experiments showed that the dynamic stability of a robot walking in a straight line changes through a supercritical Hopf bifurcation (a stationary solution becomes unstable and a new stable periodic solution appears at a critical value of a parameter) by changing the locomotion speed. The experiments also showed that the straight walk instability induces body undulations during locomotion. These findings were verified from a Floquet analysis using a simple physical model. Moreover, our robot captured the characteristics of centipede locomotion, such as the appearance of body undulations only during rapid locomotion and trends in the variation of body undulation amplitude and wavelength as a function of locomotion speed. These characteristics were evaluated by a comparison of the robot experimental results with the measured data of centipede locomotion7. In addition, our previous simulation study, which used a robot model and a simple physical model, showed that the straight walk stability also depends on the torsional spring constant34,35. That is, the body flexibility, which is a passive property in the body axis, changes the straight walk stability. Furthermore, the robot model simulation suggested that the stability influences the turning maneuverability. However, the physical condition of the simple model analysis and the robot model simulation was limited, and a part of the body-segment yaw joints was actively controlled during the turning task (i.e., not passively). The stability properties induced by the body axis flexibility and its contribution to the maneuverability were not clear.
In the present study, we improved our previous robot and control system to perform turning locomotion to demonstrate the relationship between the stability induced by the passive properties in the body axis and the maneuverability in multilegged locomotion in the real world. We first clarified the stability properties of a robot walking in a straight line in accordance with the body axis flexibility and then investigated how the stability properties influence the turning maneuverability by defining evaluation criteria to quantitatively investigate the relationship between stability and maneuverability. Our robot experimental results show that the body flexibility changes the stability of straight walking and that the straight walk instability does help the turning mobility, similar to the results of the modeling study of cockroaches. In this paper, we discuss the importance and relevance of our findings to understanding the underlying mechanisms in biological systems for manipulating the turning maneuverability and we propose a design principle for a simple control scheme to create maneuverable locomotion of multilegged robots.
We used a centipede-like multilegged robot (Fig. 1), which consists of six body segments and twelve legs. The total length is 135 cm. The body segments are connected by yaw joints (Yaw joints 1–5) installed with torsional springs (spring constant: k). Each leg has two pitch joints to walk and the legs in the first body segment have an additional yaw joint to control the walking direction by a laser range scanner. Although the body segments are passively connected, the leg joints are controlled by motors. The leg pitch joints are controlled so that the leg tips follow the desired movement composed of two parts: half of an elliptical curve, and a straight line (Fig. 1b). The straight line is parallel to the body segment. Therefore, when the leg yaw joint angles of the first module are fixed so that the leg tip trajectories are parallel to the body segment, the robot is expected to walk in a straight line while keeping the body segments parallel to each other. When the walking direction of the first body segment changes by manipulating the leg yaw joints, the body axis of the robot becomes curved due to the elasticity in the body-segment yaw joints. The elasticity allows the robot to change the walking direction.
Instability in straight walking
Our previous study using a computer simulation of a robot model and a Floquet analysis with a simple physical model34,35 showed that when the spring constant k decreases under a threshold value, straight walking becomes unstable through a Hopf bifurcation, and body undulations appear. To clarify this bifurcation property in the real world, we performed robot experiments for a walk in a straight line by using varied spring constants for the torsional springs (k = 7.3, 8.7, 11, 15, 21, 41 and 450 Nmm/deg). We set all the body segments parallel to each other as the initial condition and the leg yaw joints in the first module were fixed.
When we used large spring constants for torsional springs in the body-segment yaw joints, the robot kept walking in a straight line as expected, and the body segments were aligned without producing body undulations (Fig. 2a, Supplementary movie S1). However, when the spring constant decreased under a threshold value, body undulations appeared (Fig. 2b, Supplementary movie S2). More specifically, body undulations occurred for k = 7.3, 8.7, 11, and 15 and not for k = 21, 41, and 450 Nmm/deg. Figure 3 shows the amplitudes of body undulations in each body-segment yaw joint for k−1 calculated by the Fourier transform. The data points and error bars correspond to the means and standard errors, respectively, of the results of five experiments. These amplitudes vary with k−1 and show the Hopf bifurcation. These results were fitted by the square root of k−1 to evaluate the bifurcation point 36, which gives (SE) from five body-segment yaw joints.
To investigate the relationship between the revealed stability properties in a straight walk and the turning mobility, we performed robot experiments for a quick turn to approach a target located on the floor (x-y plane). The leg yaw joints θ1 and θ2 of the first module were controlled based on the relative angle θt between the first module and the target monitored by the laser range scanner (Fig. 4). We used θt = 80° with a 4 m distance from the first module to the target and set all body segments parallel to each other as the initial condition. This experiment was designed so that the first module determined the walking direction and the other modules followed the first module through passive connections of the body-segment yaw joints to achieve the turning task.
Figure 5 shows the time profile of the relative target angle θt and the trajectory of the first module on the floor during the turning task, where a, b and c show the results for a large spring constant (), for a spring constant close to the bifurcation point () and for a small spring constant (), respectively (Supplementary movies S3,4–5). When the spring constant was close to the bifurcation point (Fig. 5b), the robot was quickly oriented to the target and the deviation of the first module trajectory on the floor from the line between the initial position and the target (dotted lines) was small. In contrast, for the large spring constant (Fig. 5a), it took much time to change the walking direction and the first module trajectory bulged outward. The bulged shape indicates a large overshoot to approach the target. When the spring constant was small (Fig. 5c), although the robot was quickly oriented to the target direction, the relative target angle fluctuated greatly during the task. In addition, when we used k = 7.3 Nmm/deg (k−1 = 0.137), which was the smallest spring constant in our experiments, neighboring body segments easily clashed and our robot could not achieve the turning task well.
To quantitatively clarify the turning performance in accordance with the spring constant, we employed three evaluation criteria, ε1, ε2, and ε3. Figure 6 shows the results for k−1, where the data points and error bars correspond to the means and standard errors, respectively, of the results of five experiments, and the gray regions indicate that the straight walk is unstable, as estimated from Fig. 3. The first criterion ε1 shows the time that our robot took to reduce the relative target angle to less than 10% of the initial value; the time is used to evaluate how quickly our robot changes the walking direction to point to the target. The second criterion ε2 is the integration of the absolute value of the relative target angle during the turning task; the integration is used to estimate how quickly and stably our robot is oriented to the target. The third criterion ε3 indicates the deviation of the first module trajectory on the floor from the line between the initial position and the target (y = ax, a = tan10°); the deviation is used to evaluate how small the overshoot of the robot trajectory is to approach the target. For these criteria, smaller values indicate better turning performance. As shown in the figures, when the spring constant is large so that walking in a straight line is stable, these criteria have large values. Although these criteria decrease as the spring constant decreases, they show an increase, especially ε2 and ε3, at k−1 = 0.115. This means that the turning performance increases as the straight walk becomes unstable, but that a large instability degrades the performance.
As should be clear by now, stability and maneuverability are important factors for evaluating locomotor performance. The stability is related to the capability in the moving direction to resist and recover from disturbances. In contrast, the maneuverability is related to the ability to voluntarily change the direction. These properties have a strong connection in locomotion. The connection prominently appears in locomotion generated through the dynamic interactions of aerodynamics and hydrodynamics. For example, some aquatic animals and aircrafts utilize instability to enhance their maneuverability. Sea lions have relatively large flippers and highly flexible bodies, and execute turning by body flexion and using their flippers. Their flippers are located near the center of gravity and their morphology promotes rotational and translational instabilities, which enhances turning performance37. Fighter aircrafts use a high angle of attack and a high roll rate, which cause the loss of stability, to achieve high maneuverability38. In particular, the F-16 was designed to be aerodynamically unstable to enhance maneuverability39.
Legged locomotion is characterized by the dynamic interactions between the feet and the contact surface and by the intermittency of the interactions due to the discrete events of foot contact and lift-off in periodic leg movement. Mammals with erect legs have a high center of mass and use body leaning to enhance their turning maneuverability33,40. In contrast, arthropods with sprawling legs have a low center of mass and thus have difficulty in using the effect of leaning. Their locomotor behaviors are limited to being almost planar in a horizontal plane and the stability characteristics of the walking direction in the plane are assumed to be more crucial for the turning mobility as compared with mammals. However, the relationship between stability and maneuverability in arthropod locomotion is not well understood, partly because it is difficult to quantify stability and maneuverability in their locomotion41. Physical modeling and robotics studies are useful to overcome such a difficulty32,33. In the present study, we quantitatively evaluated the stability based on the appearance of body undulations (Fig. 3), which indicates a Hopf bifurcation, and the maneuverability by focusing on a quick turning task and defining three precise criteria (Fig. 6). These criteria suggest an important relationship between stability and maneuverability in multilegged locomotion.
In centipede locomotion, body undulations are absent at slow speeds and appear at faster speeds13,14. It has been suggested that rapid stepping movements induce body undulations and such undulations impede centipede motion and are resisted by the muscles along the body axis. The torsional springs in the body-segment yaw joints of our robot are based on this suggestion34 and determine the body axis flexibility. However, a conflicting study reported that the body axis muscles support body undulations7, and so the control mechanisms of the body axis movements remain questionable. In aquatic animals, the body flexibility plays an important role in locomotion42 and contributes to the turning performance43,44. In legged locomotion, changing the leg movement relative to the body influences the stability and maneuverability, as suggested in the case of hexapods32,33,41. Meanwhile, for arthropods that have a long body axis relative to the legs, such as centipedes, the body flexibility is another possibility. In the present study, we assumed that the legs of the first module create the driving force to change the walking direction and clearly determine the contribution of the body axis flexibility to stability and maneuverability.
Although our robot has only six pairs of legs, adult centipedes have at least 15 pairs of legs (some have 191 pairs of legs)5,6. Our previous works34,35 investigated the influence of the number of legs by using a robot model and a simple physical model, and clarified that three or more pairs of legs show a Hopf bifurcation. Although the bifurcation value of the body axis flexibility depends on the number of legs, the bifurcation does occur irrespective of the number of legs. In addition to the locomotion speed and the number of legs, physical and environmental conditions, such as the body weight and length and the floor friction coefficient, affect the locomotion performance. Our previous studies also investigated the influence of such conditions and showed that although the bifurcation value depends on the conditions, the appearance of the bifurcation does not depend on the conditions. In particular, floor friction is difficult to model due to the complexity of the physical interaction between the feet and the contact surface. The simulation studies used various well-known friction models, such as the linear damper model, the spring-damper model, and the Coulomb friction model, and showed that the bifurcation occurs regardless of such models.
Even though the instability helps the turning maneuver, stability and maneuverability are generally a trade-off45,46,47,48. Strong instability impedes locomotor performance, as observed in our turning experiments (Fig. 6). It is important to have an appropriate relationship between stability and maneuverability to produce the required motor functions for locomotion and to control the relationship according to the situation. Our robot experiments show that the body axis flexibility controls the stability (Fig. 3) and also the maneuverability (Fig. 6). Tuning the body axis flexibility, e.g., by appropriately timed muscle activation as seen in aquatic animals42,49, would absolutely be useful.
In the present study, the stability changed through a bifurcation via the body axis flexibility. Bifurcation plays an important role in various motor behaviors in terrestrial animals, such as gait transition50,51,52,53 and body sway in quiet standing54,55. Although it is difficult to fully clarify if and how much multilegged arthropods use dynamic instability for turning behaviors, our robot experimental results give a possible mechanism and provide meaningful insight for biological sciences.
For the control design of the locomotion of artifacts, maneuverability is an important factor. In particular, biologically inspired robots that use the body axis for propulsion in locomotion, such as snake and fish robots, have achieved maneuverable locomotion comparable to that of animals47,56,57,58,59. However, legged robots still have difficulties in producing high maneuverability in their locomotion. This is partly because they need control to avoid falling down in addition to control of the walking direction. The intermittency of the interaction with the contact surface is inevitable for legged locomotion and makes the avoidance of falling difficult. So far, the main purpose of the control design of legged robots has focused on the avoidance of falling through criteria based on, for example, a supporting polygon and a zero moment point (ZMP)60. Maneuverability has not been well investigated. However, as the number of legs increases, it becomes easier to avoid falling, as seen in centipedes. Instead, as the number of legs increases, the degrees of freedom to be controlled increase, and both motion planning (e.g., where the feet contact) and control become more difficult. Furthermore, the number of contact legs also increases, and this may impede maneuverable locomotion. Until now, no design principle has been proposed for the control of robots with many legs to create maneuverable locomotion.
Even when all robot movements are planned in real time through huge computations based on the robot model, and when tasks and planned motions are generated, robust locomotion against uncertainties, such as modeling errors and environmental variations, is not necessarily produced. Locomotor performance degrades as the robot and the environment become more complex. Designing a simple control system based on fundamental dynamical principles is more useful for legged robots than a control system based on such precise motion planning and control. For example, biped robots based on passive dynamic walking61 (walking down a shallow slope without any actuators or controllers) produced efficient locomotion due to inherent body dynamics and simple controllers62. The hexapod robot RHex series was designed to have self-stabilization properties, based on the spring-loaded inverted pendulum (SLIP) model, embedded in their body dynamics, and they successfully produced agile and robust locomotion in various environments27,28,63,64. Our robot used a simple control strategy, where the legs in the first module determine the walking direction and turning is achieved through the passive dynamics in the body axis.
In general, the design of the controller of artifacts focuses on the stabilization of the systems. However, our robot experiments show that the active use of instability leads to improvement of locomotor functions. Such instability is useful, as shown for artifacts such as aircraft38,39. However, high instability impairs the locomotor performance, and thus it is important to control the stability in accordance with the required functions. In the future, we will investigate both the optimal distribution of the spring constant in the body-segment yaw joints and adaptive tuning to enhance the maneuverability of the robot.
Our multilegged robot consists of six body segment modules (Modules 1–6), as shown in Fig. 1. Each module is composed of a single body and one pair of legs. Each leg has two links connected by pitch joints, while that in the first module (Module 1) has an additional link connected by a yaw joint to control the walking direction. Each leg joint is manipulated by an encoder-equipped motor. The body segments are passively connected by yaw joints (Yaw joints 1–5) installed with torsional springs and potentiometers. We used the same spring constant for the yaw joints and compared seven spring constants (k = 7.3, 8.7, 11, 15, 21, 41 and 450 Nmm/deg) to investigate the dependence of walking performance on the straight walk stability. Module 1 has a laser range scanner (Hokuyo, URG-04LX) to find the relative position of a target for turning. Table 1 shows the physical parameters of the robot.
The robot was controlled by an external host computer (Intel Pentium 4 2.8 GHz, RT-Linux) with 2 ms intervals, and both computer control and electric power were provided via external cables. During the experiments, the computer control and electric power cables were kept slack and suspended to avoid influencing the robot’s locomotor behavior. The robot walked on a wooden flat floor with a vinyl floor mat to suppress slipping.
Locomotion control system and experiments
Leg control for straight walking
To produce straight walking of the robot, we controlled the leg movement by using the two pitch joints in each leg to follow the desired movement, which consists of two parts: half of an elliptical curve that starts from the posterior extreme position (PEP) and ends at the anterior extreme position (AEP), and a straight line from the AEP to the PEP (Fig. 1b). In the straight line section, the leg tips moved from the AEP to the PEP in the opposite walking direction at a constant speed parallel to the body. We used 0.29 s for the duration of the half elliptical curve, 0.31 s for the duration of the straight line and 3 cm for the distance between the AEP and he PEP on each leg. The contralateral legs in each module were manipulated to move in antiphase, and the relative phase between the ipsilateral legs on adjacent modules was set to 2π/3 rad. When the leg yaw joint angles of Module 1 were fixed so that the leg tip trajectories were parallel to the body segment, our robot was expected to walk in a straight line while keeping the body segments parallel to each other, because torsional springs were installed on the body-segment yaw joints and the leg tips moved parallel to the body segments at an identical speed for all legs.
Turning control and performance evaluation
For a quick turn task of our robot, we made the robot approach a target located on the floor in a largely different direction from where the robot was oriented (Fig. 4a). For that purpose, we used the relative angle θt of the first module measured by the laser range scanner and the leg yaw joints θ1 and θ2 of the first module (Fig. 4b). Specifically, we determined the desired angles and of θ1 and θ2 for each gait cycle (, is the time when the desired leg tip is at the PEP for the nth gait cycle, and T is the gait cycle duration (=0.6 s)) by
where tstart and tend were set to 40% and 80%, respectively, of the duration of the half elliptical curve of the leg tip trajectory (=0.12 and 0.23 s). This means that each leg changed its yaw direction to the target only during the swing phase with 5° of the maximum turning angle for one gait cycle. The robot iterated this procedure in the legs of the first module for the gait cycles (after t = 5 s), and the turning task was complete when θt converged to 0. We performed robot experiments of this turning task for various spring constants of the torsional springs to investigate the dependence of the turning mobility on spring constant k. We used θt = 80° and 4 m for the distance between the first module and target and set all body-segment yaw joint angles to zero as the initial condition.
To quantitatively investigate the turning performance of our robot, we defined three evaluation criteria, ε1, ε2, and ε3. For the first criterion, ε1, we examined the time needed for our robot to reduce the relative angle θt to less than 10% of the initial value in order to evaluate how quickly the robot changed the walking direction to point to the target. We defined the second criterion ε2 by
where t1 = 5 s (start time of turning) and t1 = 55 s (θt sufficiently converges to 0 for stable cases and shows some oscillations for unstable cases by this time). This criterion estimated how quickly and stably our robot was oriented to the target. For the third criterion, ε3, we used
where y = f(x) is the trajectory of the first module on the floor during the turning task, x = y = 0 is the initial position, y = ax is the line connected from the initial position to the target (a = tan10°), x1 = x(t1), and x2 = x(t2). The position of the first module on the floor was calculated by measuring not only the target but also other landmarks located on the floor by using the laser range scanner. The third criterion calculated the area enclosed by the trajectory of the first module (y = f(x)) and the line (y = ax) to evaluate how much the first module deviated from the line (y = ax) and how small the overshoot was to approach the target (Fig. 4a).
How to cite this article: Aoi, S. et al. Advantage of straight walk instability in turning maneuver of multilegged locomotion: a robotics approach. Sci. Rep. 6, 30199; doi: 10.1038/srep30199 (2016).
Ren, G. et al. Multiple chaotic central pattern generators with learning for legged locomotion and malfunction compensation. Inform. Sciences 294, 666–682 (2015).
Sarkar, D., Dubey, S. K., Mahapatra, A. & Roy, S. S. Modeling and analysis of fault tolerant gait of a multi-legged robot moving on an inclined plane. Procedia Tech. 14, 93–99 (2014).
Yang, J. & Kim, J. A fault tolerant gait for a hexapod robot over uneven terrain. IEEE Trans. Syst. Man Cybern. B 30, 172–180 (2000).
Yang, J. & Kim, J. Fault-tolerant locomotion of the hexapod robot. IEEE Trans. Syst. Man Cybern. B 28, 109–116 (1998).
Kettle, C., Arthur, W., Jowett, T. & Minelli, A. Homeotic transformation in a centipede. Trends Genet. 15, 393 (1999).
Minelli, A., Foddai, D., Pereira, L. A. & Lewis, J. G. E. The evolution of segmentation of centipede trunk and appendages. J. Zool. Syst. Evol. Res. 38, 103–117 (2000).
Anderson, B. D., Shultz, J. W. & Jayne, B. C. Axial kinematics and muscle activity during terrestrial locomotion of the centipede Scolopendra Heros. J. Exp. Biol. 198, 1185–1195 (1995).
Bässler, U. & Büschges, A. Pattern generation for stick insect walking movements-multisensory control of a locomotor program. Brain Res. Rev. 27, 65–88 (1998).
Camhi, J. M. & Johnson, E. N. High-frequency steering maneuver mediated by tactile cues: Antennal wall-following in the cockroach. J. Exp. Biol. 202, 631–643 (1999).
Cruse, H. What mechanisms coordinate leg movement in walking arthropods? Trends. Neurosci. 13, 15–21 (1990).
Dürr, V. & Ebeling, W. The behavioural transition from straight to curve walking: kinetics of leg movement parameters and the initiation of turning. J. Exp. Biol. 208, 2237–2252 (2005).
Jindrich, D. L. & Full, R. J. Many-legged maneuverability: dynamics of turning in hexapods. J. Exp. Biol. 202, 1603–1623 (1999).
Manton, S. M. The evolution of arthropodan locomotory mechanisms. Part 8. Functional requirements and body design in Chilopoda, together with a comparative account of their skeleto-muscular systems and an Appendix on A comparison between burrowing forces of annelids and chilopods and its bearing upon the evolution of the arthropodan haemocoel. J. Linn. Soc. (Zool.) 46, 251–484 (1965).
Manton, S. M. The arthropoda: Habits, functional morphology and evolution, Clarendon Press: Oxford (1977).
Pearson, K. The control of walking. Sci. Am. 235, 72–86 (1976).
Ritzmann, R. E. & Büschges, A. Adaptive motor behavior in insects. Curr. Opin. Neurobiol. 17, 629–636 (2007).
Alexander, R.McN. Stability and manoeuvrability of terrestrial vertebrates. Integr. Comp. Biol. 42, 158–164 (2002).
Cruse, H., Dürr, V. & Schmitz, J. Insect walking is based on a decentralized architecture revealing a simple and robust controller. Phil. Trans. R. Soc. A 365, 221–250 (2007).
Ekeberg, Ö., Blümel, M. & Büschges, A. Dynamic simulation of insect walking. Arthropod. Struct. Dev. 33, 287–300 (2004).
Holmes, P., Full, R. J., Koditschek, D. & Guckenheimer, J. The dynamics of legged locomotion: Models, analyses, and challenges. SIAM Rev. 48, 207–304 (2006).
Knops, S., Tóth, T. I., Guschlbauer, C., Gruhn, M. & Daun-Gruhn, S. A neuromechanical model for the neuronal basis of curve walking in the stick insect. J. Neurophysiol. 109, 679–691 (2013).
Kukillaya, R., Proctor, J. & Holmes, P. Neuromechanical models for insect locomotion: Stability, maneuverability, and proprioceptive feedback. Chaos 19, 026107 (2009).
Szczecinski, N. S., Brown, A. E., Bender, J. A., Quinn, R. D. & Ritzmann, R. E. A neuromechanical simulation of insect walking and transition to turning of the cockroach Blaberus discoidalis. Biol. Cybern. 108, 1–21 (2014).
Aguilar, J. et al. A review on locomotion robophysics: the study of movement at the intersection of robotics, soft matter and dynamical systems. Rep. Prog. Phys., in press (arXiv:1602.04712).
Hoffman, K. L. & Wood, R. J. Myriapod-like ambulation of a segmented microrobot. Auton. Robots 31, 103–114 (2011).
Ijspeert, A. J. Biorobotics: Using robots to emulate and investigate agile locomotion. Science 346, 196–203 (2014).
Li, C., Umbanhowar, P. B., Komsuoglu, H., Koditschek, D. E. & Goldman, D. I. Sensitive dependence of the motion of a legged robot on granular media. Proc. Natl. Acad. Sci. USA 106, 3029–3034 (2009).
Li, C., Zhang, T. & Goldman, D. I. A terradynamics of legged locomotion on granular media. Science 339, 1408–1411 (2013).
Pfeifer, R., Lungarella, M. & Iida, F. Self-organization, embodiment, and biologically inspired robotics. Science 318, 1088–1093 (2007).
Ritzmann, R. E., Quinn, R. D., Watson, J. T. & Zill, S. N. Insect walking and biorobotics: A relationship with mutual benefits. BioScience 50, 23–33 (2000).
Steingrube, S., Timme, M., Wörgötter, F. & Manoonpong, P. Self-organized adaptation of a simple neural circuit enables complex robot behaviour. Nat. Phys. 6, 224–230 (2010).
Schmitt, J. & Holmes, P. Mechanical models for insect locomotion: dynamics and stability in the horizontal plane I. Theory. Biol. Cybern. 83, 501–515 (2000).
Schmitt, J. & Holmes, P. Mechanical models for insect locomotion: dynamics and stability in the horizontal plane - II. Application. Biol. Cybern. 83, 517–527 (2000).
Aoi, S., Egi, Y. & Tsuchiya, K. Instability-based mechanism for body undulations in centipede locomotion. Phys. Rev. E 87, 012717 (2013); featured in Nat. Phys. 9, 134 (2013), News & Views.
Aoi, S., Sasaki, H. & Tsuchiya, K. A multilegged modular robot that meanders: Investigation of turning maneuvers using its inherent dynamic characteristics. SIAM J. Appl. Dyn. Syst. 6, 348–377 (2007).
Strogatz, S. H. Nonlinear dynamics and chaos: With applications to physics, biology, chemistry, and engineering, Perseus Books: New York (1994).
Fish, F. E., Hurley, J. & Costa, D. P. Maneuverability by the sea lion Zalophus californianus: turning performance of an unstable body design. J. Exp. Biol. 206, 667–674 (2003).
Avanzini, G. & de Matteis, G. Bifurcation analysis of a highly augmented aircraft model. J. Guid. Contr. Dyn. 20, 754–759 (1997).
Kwatny, H. G., Bennett, W. H. & Berg, J. Regulation of relaxed static stability aircraft. IEEE Trans. Automat. Contr. 36, 1315–1332 (1991).
Courtine, G. & Schieppati, M. Human walking along a curved path. II. Gait features and EMG patterns. Eur. J. Neurosci. 18, 191–205 (2003).
Full, R. J., Kubow, T., Schmitt, J., Holmes, P. & Koditschek, D. Quantifying dynamic stability and maneuverability in legged locomotion. Integr. Comp. Biol. 42, 149–157 (2002).
Tytell, E. D., Hsu, C.-Y., Williams, T. L., Cohen, A. H. & Fauci, L. J. Interactions between internal forces, body stiffness, and fluid environment in a neuromechanical model of lamprey swimming. Proc. Natl. Acad. Sci. USA 107, 19832–19837 (2010).
Fish, F. E. Balancing requirements for stability and maneuverability in cetaceans. Integr. Comp. Biol. 42, 85–93 (2002).
Walker, J. A. Does a rigid body limit maneuverability? J. Exp. Biol. 203, 3391–3396 (2000).
Dickinson, M. H. et al. How animals move: an integrative view. Science 288, 100–106 (2000).
Mountcastle, A. M., Ravi, S. & Combes, S. A. Nectar vs. pollen loading affects the trade-off between flight stability and maneuverability in bumblebees. Proc. Natl. Acad. Sci. USA 112, 10527–10532 (2015).
Sefati, S. et al. Mutually opposing forces during locomotion can eliminate the tradeoff between maneuverability and stability. Proc. Natl. Acad. Sci. USA 110, 18798–18803 (2013).
Weihs, D. Stability versus maneuverability in aquatic locomotion. Integr. Comp. Biol. 42, 127–134 (2002).
Long, J.H. Muscles, elastic energy, and the dynamics of body stiffness in swimming eels. Am. Zool. 38, 771–792 (1998).
Aoi, S. et al. A stability-based mechanism for hysteresis in the walk–trot transition in quadruped locomotion. J. R. Soc. Interface 10, 20120908 (2013).
Aoi, S., Yamashita, T. & Tsuchiya, K. Hysteresis in the gait transition of a quadruped investigated using simple body mechanical and oscillator network models. Phys. Rev. E 83, 061909 (2011).
Diedrich, F. J. & Warren Jr., W. H. Why change gaits? Dynamics of the walk-run transition. J. Exp. Psychol. Hum. Percept. Perform. 21, 183–202 (1998).
Fujiki, S. et al. Hysteresis in the metachronal-tripod gait transition of insects: A modeling study. Phys. Rev. E 88, 012717 (2013).
Chagdes, J. R., Rietdyk, S., Jeffrey, M. H., Howard, N. Z. & Raman, A. Dynamic stability of a human standing on a balance board. J. Biomech. 46, 2593–2602 (2013).
Funato, T., Aoi, S., Tomita, N. & Tsuchiya, K. Smooth enlargement of human standing sway by instability due to weak reaction floor and noise. R. Soc. Open Sci. 3, 150570 (2016).
Astley, H. C. et al. Modulation of orthogonal body waves enables high maneuverability in sidewinding locomotion. Proc. Natl. Acad. Sci. USA 112, 6200–6205 (2015).
Curet, O. M., Patankar, N. A., Lauder, G. V. & MacIver, M. A. Aquatic manoeuvering with counter-propagating waves: A novel locomotive strategy. J. R. Soc. Interface 8, 1041–1050 (2011).
Maladen, R. D., Ding, Y., Umbanhowar, P. B., Kamor, A. & Goldman, D. I. Mechanical models of sandfish locomotion reveal principles of high performance subsurface sand-swimming. J. R. Soc. Interface 8, 1332–1345 (2011).
Stamper, S. A., Sefati, S. & Cowan, N. J. Snake robot uncovers secrets to sidewinders’ maneuverability. Proc. Natl. Acad. Sci. USA 112, 5870–5871 (2015).
Vukobratović, M., Borovac, B., Surla, D. & Stokić, D. Biped locomotion-dynamics, stability, control and application, Springer-Verlag (1990).
McGeer, T. Passive dynamic walking. Int. J. Robot. Res. 9, 62–82 (1990).
Collins, S. H., Ruina, A. L., Tedrake, R. & Wisse, M. Efficient bipedal robots based on passive-dynamic walkers. Science 307, 1082–1085 (2005).
Altendorfer, R. et al. RHex: A biologically inspired hexapod runner. Auton. Robots 11, 207–213 (2001).
Saranli, U., Buehler, M. & Koditschek, D. E. RHex: A simple and highly mobile hexapod robot. Int. J. Robot. Res. 20, 616–631 (2001).
This paper is supported in part by a Grant-in-Aid for Challenging Exploratory Research (23656185, 26630097) from the Ministry of Education, Culture, Sports, Science, and Technology of Japan and by JST, CREST, Japan.
The authors declare no competing financial interests.
About this article
Cite this article
Aoi, S., Tanaka, T., Fujiki, S. et al. Advantage of straight walk instability in turning maneuver of multilegged locomotion: a robotics approach. Sci Rep 6, 30199 (2016). https://doi.org/10.1038/srep30199
This article is cited by
Journal of Micro-Bio Robotics (2021)
Artificial Life and Robotics (2021)
Artificial Life and Robotics (2017)