Microorganisms colonize a wide range of natural and artificial environments although there are hardly any data on the microbial ecology of one the most widespread man-made extreme structures: solar panels. Here we show that solar panels in a Mediterranean city (Valencia, Spain) harbor a highly diverse microbial community with more than 500 different species per panel, most of which belong to drought-, heat- and radiation-adapted bacterial genera, and sun-irradiation adapted epiphytic fungi. The taxonomic and functional profiles of this microbial community and the characterization of selected culturable bacteria reveal the existence of a diverse mesophilic microbial community on the panels’ surface. This biocenosis proved to be more similar to the ones inhabiting deserts than to any human or urban microbial ecosystem. This unique microbial community shows different day/night proteomic profiles; it is dominated by reddish pigment- and sphingolipid-producers, and is adapted to withstand circadian cycles of high temperatures, desiccation and solar radiation.
Today, photovoltaic panels cover around 4000 square kilometers, and are forecasted to be the world’s main electricity source by 2050 (http://www.epia.org). Solar panels are unique biotopes characterized by a smooth flat glass or glass-like surface, minimum water retention capacity and maximum sunlight exposure, all of which determine circadian and annual peaks of irradiation, desiccation and heat. Extreme natural habitats such as thermal vents, mountain plateaus or hyper arid deserts are known to host microbial biocenoses adapted to those particular selection pressures1,2,3; and artificial or humanized environments, such as industrial reactors4, radioactive waste5 or oil spills6 are also colonizable by specialized microorganisms. Among artificial environments, indoor biomes constitute around 0.5% of the ice-free land area, a surface comparable to the subtropical coniferous forest7. Geography and building type, among other factors, structure indoor microbes, which are inoculated by human skin and outdoor air8 and even by indoor plants9. One of the recently studied indoor habitats is the subway. A recent study of the aerosol microbial communities of the New York City subway platforms10 revealed that such communities were a mixture of soil, environmental water, and human skin commensal bacteria. In a similar work in the Hong Kong subway networks11, researchers found that each subway line harbored a different phylogenetic community, depending on architectural characteristics, nearby (outdoor) microbiomes, as well as connectedness with other lines.
Most of the so-called built environment studies have so far focused in the indoor biomes but less attention has been paid to artificial, outdoor environments. A recent example of those is an ambitious city-scale metagenomics screening on the bacterial diversity of New York (including both indoor and outdoor biomes), which found a very high diversity of microorganisms -roughly 1700 bacterial taxa-, half of which did not match any known organism12. However, many artificial outdoor environments remains unexplored to date.
In the present work, we aimed at studying solar panels, an outdoor artificial environment whose role as biotope had not previously been reported. The goal of our study was to identify possible microbial communities thriving in the harsh conditions of the panels’ surfaces, and to determine to which extent this highly irradiated environment was home of ecologically extremophile bacteria (thermophilic and radio-resistant taxa, for example), as well as to identify microbial strains with biotechnological applications, such as carotenoid producers.
Our report documents a complete bioprospection and characterization of the microbial community on photovoltaic panels of a Mediterranean city, using high throughput 16S/18S rRNA analysis, metagenomic sequencing, metaproteomics, and culture-based characterization of selected isolates.
Culturing of solar panel samples from the 2013 solstice on LB, R2A, and marine media yielded a relatively high number of colony forming microorganisms, mostly bacteria, displaying a wide range of color and shapes. Many of the isolates displayed red, orange or pink pigmentation (Figure S1), particularly those incubated on marine agar. A total of 53 pigmented isolates were selected and subjected to taxonomic (16S rRNA) characterization and tested for resistance to heat (incubation at 60 °C), UV exposure (2 to 30 s pulses of a 340 μW cm−2 UV light), high NaCl contents (1 to 26%) and different pH values (5 to 9). Most of the solar-panel isolates displayed resistance to very high salt concentrations (20–26% w/v NaCl) and short exposures to UV light, whereas only a few number of isolates proved resistant to a low pH or extreme heat (Figure S2). Interestingly, during these characterization assays we were able to identify isolates able to restore the growth of nearby isolates under conditions of extreme salt or pH values, in the latter case because of local buffering of the pH of the plate (Figure S1). Full characterization of the 53 isolates is provided in Table S1 and Figure S2.
The taxonomic composition of bacterial and eukaryotic taxa was first studied through 16S and 18S rRNA genes massive sequencing; the results are shown in Fig. 1. As many as 800 different bacterial species were identified in the 2013 pool (nine solar panels from different locations within the University of Valencia); and around 500 different species were found in each of the individual panels sampled from a single building in 2014 (Table S2). Two orders, Sphingobacteriales (families Flexibacteriaceae and Sphingomonadaceae) and Deinococcales comprised the highest number of species. Deinococcus, Sphingomonas, Novosphingobium or Hymenobacter were the dominant genera, with 9.2% or 28% of the assigned sequences (H. chitinivorans in panel 1 and D. hopiensis in panel 3, respectively). The remaining sequences were distributed among 17 phyla and 146 families. Other well-represented genera, in order of abundance, were Rubellimicrobium, Adhaeribacter, Acidicaldus, Segetibacter, or Modestobacter. In the case of fungi, lower biodiversity was found (Fig. 1B). Taxonomic eukaryotic profiles were dominated by the phylum Ascomycota and the families Pleosporaceae and Teratosphaeriaceae, with genera Phaeothecoidea and Alternaria representing the majority in the 2013 and 2014 samples, respectively.
In 2014, the metagenomic DNA of two independent solar panels was shotgun sequenced. As shown in Fig. 1C, the ratio of bacteria:fungi reads was close to 50%, and species distribution was similar to that found for 16S and 18S rRNA sequencing. Genus Deinococcus, one of the clearest taxonomic markers of extremophily, again proved highly abundant in all our samples. A summary of sequencing statistics and diversity indexes can be accessed in Table S3. The core microbiome, understood as the number of species detected in all the samples analyzed, comprised around 120 species (26% of the total number of species detected), and was composed, mainly, by members of the Deinococcus, Sphingomonas, Novosphingobium, and Hymenobacter genera.
We analyzed Deinococcus sequences from our metagenomic analysis and a draft Deinococcus solar panel pangenome of 2098 contigs was obtained, covering more than 0,8 Mb (25%) of standard Deninococcus genomes (3.3Mb with 2 chromosomes and 2 plasmids), with 2166 and 149 ORFs and tRNAs, respectively (Fig. 1D). The low identity level of the solar panel pangenome with previously sequenced Deinococcus species strongly suggests that at least one previously undescribed Deinococcus species is present in the sampled panels.
Regarding the functional profile, that of two independent solar panels (1 and 3) was deduced from the metagenomic data, and statistically analyzed with the STAMP software. When compared to a range of metagenomes from diverse habitats, solar-panel functional profiles clustered together with those described for polar microbial mat and saline desert datasets, and distant to those of other environments such as air or sediments (Fig. 2A). Both solar panels proved very similar to each other in terms of functions, as shown in Fig. 2B. The bioactivity of the biocenosis was studied through a metaproteomic analysis conducted on solar panels sampled at noon (solar time) and at night (4 AM). Protein composition differed between the day and night samples (Fig. 2C). Significantly, a protein involved in modulating bacterial growth on surfaces and biofilm formation13 (diguanylate cyclase) was particularly abundant. Also among the more expressed proteins, we identified fungal and bacterial enzymes involved in respiration and ATP synthesis or ribosomal proteins (bacterial L7/L12 and archaeal L7, the latter being a moonlighting protein involved in rRNA processing14). Other abundant proteins have been reported to confer resistance/tolerance to the extreme conditions found in solar panels, namely, salt stress and drought (membrane-bound proton-translocating pyrophosphatase mPP15), nutrient starvation (mPP and cold-shock protein16), heat-shock (molecular chaperone GroEL), as well as proteins involved in the preservation of membrane integrity under harsh conditions17,18 (S-layer protein, lipoprotein 1; Table S4).
Despite the harsh conditions to which microorganisms deposited -or permanently inhabiting- the solar panels of a Mediterranean city are subjected during summer, standard culturing resulted in important microbial growth, with a diversity in shape, color and textures of colony forming microorganisms from the 2013 solstice suggesting high biodiversity of the environment. Although culturable isolates are typically only a small fraction of the global biocenosis, we were able to identify several strain-to-strain effects that proved able to restore the sensitivity of neighboring isolates to stress factors (salinity and low pH). These results suggest that microbial interactions and the particular physical location of microorganisms on the solar panels, rather than individual cell properties, might play a major role in bacterial survival on solar panels.
High throughput sequencing allowed confirming the high diversity of the habitat in the form of a sun-adapted taxonomic profile. Indeed, and in accordance with the majoritary phenotype observed within culturable isolates, most of the species identified by high throughput sequencing, and particularly the most frequent ones, are known to produce pink (H. xingiangensis19, H. psychrotolerans20), orange (Sphingomonas humi21), orange-red (S. kaistensis22) or reddish pigments (Hymenobacter chitinivorans23, Rubellimicrobium mesophilum24), in most cases carotenoids; as well as sphingolipids (Sphingomonas spp.21,22, Novosphingobium spp.25). Carotenoids have been reported to play a major role in radiation tolerance in bacteria26 and sphingolipids have recently been described to mediate bacteria-to-silica and –polyamide adhesion27. Therefore, carotenoids and sphingolipids are candidates accounting for the sunlight resistance and fixation properties that microorganisms need to survive on a smooth, south-facing surface.
A review of the ecology of the main bacterial taxa we identified gives more insights of the extremophile character of the solar panel bacteriome. Indeed, several of the most frequent Deinococcus spp. and other solar-panel bacteria have been described as inhabitants of relatively mild desertic areas as well as polar environments. D. hopiensis was isolated from the Sonora desert28, while other Deinococcus species that we detected were first described in the Sahara desert29. Regarding other very abundant species, such as Hymenobacter xingiangensis or Sphingomonas kaistensis, they have previously been reported on the high Tibet plateau20, on dry Antarctic valleys30, or in the Chinese desert of Xingiang19. Others were first reported in high salinity areas31, thermal springs32 or during bioprospections of soil33,34, or air samples35,36. A systematic review of the locations where the 50 most abundant solar panel bacteria were first isolated reveals their adaptation to extreme environments: most of them occur in drought, high radiation and/or high temperature habitats. Most of the species we found on solar panels were originally reported to inhabit a relatively narrow geographical band in the temperate zone of the Northern hemisphere. The distribution of others in the dry Antarctic valleys suggests a major role of radiation as a key selective factor (Fig. 3A), and the PCoA analysis of the solar-panel taxonomic profile compared with other metagenomes reveals a clear link with extremophile environments, such as temperate and cold deserts (Fig. 3B).
Regarding fungi, the ecological niches of several of the most frequent genera (Neocatenulostroma, Xenophacidiella and Metschnikowia) are sunny habitats, such as the phylloplane37,38 or the surface of rocks (Coniosporium spp.39, particularly abundant in the 2013 samples). As in the case of bacteria, this taxonomic profile strongly suggests sunlight exerts a major selective pressure, shaping the fungal community on the panels.
The abundance and diversity of microorganisms in solar panels can be solely due to wind-deposition or correspond to an in situ active ecological community. Protein composition differed significantly between the day and night samples (Fig. 2C), implying that the microbial communities populating the solar panel surface are biologically active. The abundance of proteins involved in resistance to harsh conditions and biofilm formation on surfaces proves the presence of stress-response mechanisms in the microbial communities inhabiting solar panels.
These results, along with the abundance of radiation-resistant taxa and the desert-like taxonomic profile of the solar samples, that strikingly plot within desert microbiomes (Fig. 3B), strongly suggest an in situ adaptation from (probably) wind-transported microorganisms that are immediately subjected to selection with radiation, heat and dessication as main shapers of this microbial ecosystem. Indeed, the solar panels microbiome proved taxonomically very distant from that associated to air samples from similar latitude (see metagenomes 4516651.3 and 4516403.3 in Fig. 3B). Furthermore, a recent analysis of air samples in Sardinia40, a known Mediterranean crossroad of dust-conveying winds from Saharan Africa, revealed an extremely low abundance of extremophiles such as Deinococcus-Thermus species (<1% of relative abundance, in contrast to up to 30% in solar panels). Taken together, all these results strongly suggest that the diverse biocenosis on solar panels we report here is not a mere consequence of physical accumulation of air-driven microorganisms, but a resident microbial community adapted to desert-like selection pressures.
This is the first report of a highly diverse microbial community on solar panels. A recently published study reported limited microbial diversity on solar panels in Brazil, including some fungal species which hindered the panel’s photovoltaic efficiency41. Our data show for the first time that solar panels of a temperate Mediterranean city support a highly diverse and active ecological community, one of the richest extremophile biocenoses described to date. Moreover, this community is metabolically active and displays striking taxonomic and functional similarities with highly irradiated environments: temperate deserts and polar environments. The detailed analysis of the habitats where the solar panel microorganisms have previously been detected indicates their strong adaptation to sun exposure, which can only be partially reproduced by stress characterization on pure microbial cultures. Microbial interactions (including pH and salinity tolerance restoration), physical effects such as shading, DNA repair mechanisms and production of pigments and adhesion molecules might play a major role in the adaptation of a unique microbial ecosystem to the abrupt circadian cycles in desert-like conditions. This previously undescribed ecosystem is the first urban microdesert reported to date, and it may provide a valuable new source of compounds with biotechnological applications.
Sampling was performed during the summer solstice of 2013 and 2014. Sampling consisted of a simple harvesting procedure, by pouring sterile PBS (sodium phosphate buffer) on the panel and immediately harvesting the liquid by strongly and repeatedly scraping the surface with a modified window cleaner with an autoclaved silicone tube measuring 5 mm in diameter. The resulting suspension was collected by using a sterile plastic pipette and transferred to sterile Falcon tubes, placed on ice and immediately transported to the lab. Solar panels had a surface of 1.28 m2, had been in operation for at least 5 years, and the different panels sampled were separated at least 10 meters to avoid statistical biases in microbial composition. In 2013, nine samples from solar panels on the three campuses of the University of Valencia (Valencia, Spain) were collected at noon (2 PM) and pooled together for further analysis through 16S/18S rRNA sequencing and cultivation methods. Air temperature was 33 °C and relative humidity was 60%. In 2014, we sampled three solar panels from a single location (Faculty of Economics, University of Valencia, Valencia, Spain) under day (2 PM) and night conditions (4 AM). Day-collected samples were independently analyzed through 16S/18S rRNA sequencing, Illumina shotgun sequencing (only two of the panels sampled), and metaproteomics; whereas night-collected samples were only used for the metaproteomic analysis. Air temperature and relative humidity were 32 °C and 56% (2 PM), and 23 °C and 83% (4 AM).
The average temperature of the panels’ surface during the sampling process (at 2 PM) was 51 °C. The average solar irradiance in Valencia at 2 PM is 461.3 W/m2, whereas the accumulated solar irradiance during an average day is 19.6 kJ/m2. According to the reports of AEMET (Spanish State Meteorological Agency), the weather conditions in Valencia were similar between May-June 2013 and May-June 2014 (the periods prior to summer solstice when sampling took place). In 2013, the temperature of the one-month period prior sampling was 0.8 °C lower than the average, and the precipitation levels dropped a 20% with respect to the last decade. In contrast, in 2014, the temperature of the one-month period prior sampling was 0.5 °C higher than the average, and normal precipitation levels were recorded. The microbial profiles displayed no major changes between 2013 and 2014.
Microbiological media and growth conditions
Three culture media (LB medium, R2A medium, and marine agar) were used in this work according to our previous experience in other highly irradiated environments, where those media proved optimal to detect pigment-producing strains. Aliquots of 100 μL from the solar-panel samples were spread on Petri dishes containing LB medium (composition in g/L: peptone 10.0, NaCl 10.0, yeast extract 5.0), R2A medium (composition in g/L: peptone 0.5, casaminoacids 0.5, yeast extract 0.5, dextrose 0.5, soluble starch 0.5, K2HPO4 0.3, MgSO4 0.05, sodium pyruvate 0.3) or marine medium (composition in g/L: peptone 5.0, yeast extract 1.0, ferric citrate 0.1, NaCl 19.45, MgCl2 5.9, Na2SO4 3.24, CaCl2 1.8, KCl 0.55, NaHCO3 0.16, KBr 0.08, SrCl2 0.034, H3BO3 0.022, Na4O4Si 0.004, NaF 0.024, NH4NO3 0.0016, Na2HPO4 0.008), and incubated at room temperature (previous tests were performed at different temperatures, but the largest number of colonies was observed at room temperature) for 7 days. Individual colonies were independently re-streaked on new media and pure cultures were finally identified through 16S rRNA sequencing and crio-preserved in 20% glycerol (v/v) until required. A total of 53 bacterial strains were characterized under stress conditions and serially confronted with each other in solid medium to detect interactions in terms of resistance to harsh conditions.
Strains stress tests
Each strain was subjected to a range of stress assays to test tolerance to salinity, heat, low pH, and UV radiation. Overnight liquid cultures were adjusted to an OD600 value of 0.03. Then, stress tests were carried out by plating several 20 μL droplets of the diluted culture on LB, R2A, or marine agar with the following modifications. In the case of salinity stress, increasing amounts of NaCl (from 1 to 9% w/v) were added to the media (final concentration ranging from 1 to 26% w/v). To test pH resistance, culture media was adjusted to pH 5, 6, and 8. In the case of heat, plates were incubated overnight at 60 °C; whereas resistance to radiation was tested by applying UV pulses of different length (30 s, 2 min, and 8 min) with a VL-4C lamp (254 nm, 340 μW cm-2; Labolan, S.L., Spain). The XL1-Blue E. coli strain was used as control. For each experiment, two independent replicates were performed.
In order to detect inhibition or synergistic effects between strains, experiments were performed as described above and strain suspensions (20 μl) were closely (3 mm) placed on the same dish.
Selected DNA purification methods were used to process the solar panels samples and DNA yields were compared (data not shown). Metagenomic DNA was isolated using the Power Soil DNA Isolation kit (MO BIO Laboratories) following the manufacturer’s instructions with an additional pretreatment with DNA-free lysozyme at 37 °C for 10 min. The quantity and quality of the DNA was determined on a 1.5% agarose gel and with a Nanodrop-1000 Spectophotometer (Thermo Scientific, Wilmington, DE).
PCR amplification and 16S/18S rRNA massive sequencing
A set of primers adapted to massive sequencing for the Ion Torrent platform (Lifetechnologies) were used to capture 16S (modified from a previous study42) and 18S (modified from a previous study43) rRNA from the solar-panel DNA extraction in a PCR reaction. PCR reactions were performed with 30 ng of metagenomic DNA, 200 μM of each of the four deoxynucleoside triphosphates, 400 nM of each primer, 2.5 U of FastStart HiFi Polymerase, and the appropriate buffer with MgCl2 supplied by the manufacturer (Roche, Mannheim, Germany), 4% of 20 g/mL BSA (Sigma, Dorset, United Kingdom), and 0.5 M Betaine (Sigma). Thermal cycling consisted of initial denaturation at 94 °C for 2 minutes followed by 35 cycles of denaturation at 94 °C for 20 seconds, annealing at 50 °C for 30 seconds, and extension at 72 °C for 5 minutes.
Amplicons were combined in a single tube in equimolar concentrations. The pooled amplicon mixture was purified twice (AMPure XP kit, Agencourt, Takeley, United Kingdom) and the cleaned pool requantified using the PicoGreen assay (Quant-iT, PicoGreen DNA assay, Invitrogen). Subsequently, sequencing on the Ion Torrent platform was performed at LifeSequencing S.L. (Valencia, Spain).
Shotgun metagenomic sequencing
The metagenomic DNA of two of the solar panels sampled in 2014 (solar panels 1 and 3, from which enough DNA was available) was shotgun sequenced. A Nextera Illumina library was built from 100 ng total DNA following the protocol indications marked by Illumina. Those libraries were sequenced in a MiSeq sequencer (Illumina) at Lifesequencing SL, in a combination of 500 cycles, in order to obtain 250 bp paired-end sequences.
16S/18S rRNA profiles
The resulting sequences from the taxonomical identification, based on PCR capturing of the 16S and 18S rRNA, were split taking into account the barcode introduced during the PCR reaction, providing a single FASTQ file for each of the samples. We performed quality filtering (Q20) using fastx tool kit version 0.013, primer (16S and 18S rRNA primers) trimming using cutadapt version 1.4.1 and length (minimum 300 bp read length) trimming using in-house perl scripting over those FASTQ files to obtain a FASTQ file with clean data. Those clean FASTQ files were converted to FASTA files and UCHIME44 program version 7.0.1001 was used to remove chimeras arising during the amplification and sequencing step.
Those clean FASTA files were BLAST against NCBI 16S rRNA and fungi database using blastn version 2.2.29+. The resulting XML file were processed using a pipeline developed by Lifesequencing S.L. (Paterna, Valencia, Spain) in order to annotate each sequence at different phylogenetic levels (Phylum, Family, Genera and Species). Statistical analysis was performed using R version 3.1.1. A summary of sequencing statistics and results is available in Table S2.
Taxonomic and functional analysis of metagenomic sequences
Two FASTQ files per sample were obtained during the sequencing step, each coming from each of the directions on the paired-end sequencing. Those files were trimmed for adapters and low quality reads using cutadapt version 1.4.1 with the paired-end option. Trimmed sequences were used for taxonomical identification using a local alignment tool against nt database from NCBI as described before45. The trimmed sequences from each solar panel were also assembled using different combinations of k-mers in Abyss version 1.5.246 and Velvet version 1.2.147 in order to find the best combination. The best assembly in each solar panel was used to perform a prediction of ORFs by using MetaGeneMark48. BLASTP against nr NCBI database was used for annotation and webMGA49 for COG assignation. All our data have been deposited in the MG-RAST server, and is publicly available under accession numbers 4629146.3 and 4629747.3.
In order to compare the taxonomic profile of solar panels with other environments, the taxonomic information of 25 metagenomes belonging to different habitats was obtained from the MG-RAST server (IDs 4455835.3, 4455836.3, 4477803.3, 4477872.3, 4477873.3, 4441205.3, 4445129.3, 4445126.3, 4477903.3, 4477904.3, 4477901.3, 4514299.3, 4543019.3, 4543020.3, 4441347.3, 4441363.3, 4441215.3, 4441214.3, 4441679.3, 4441682.3, 4447192.3, 4447102.3, 4497390.3, 4497389.3, 4497397.3, 4516651.3, and 4516403.3). The different profiles were processed with MEGAN. Data were normalized, and the distances between pairs of profiles calculated with the Bray-Curtis method. Finally, the calculated distances were used to build a Principal Coordinates Analysis. We employed the Statistical Analysis of Metagenomic Profiles (STAMP) (version 1.08; Faculty of Computer Science, Dalhousie University) software to compare the functional profile (according to subsystems categories) of our samples with those of the metagenomes previously cited. The functional data of metagenomes 4455835.3, 4455836.3, 4477803.3, 4477872.3, 4477873.3, 4477903.3, 4477904.3, 4477901.3, 4514299.3 was poor or absent, and was thus eliminated from the analysis. This comparison was represented in a heatmap, where the different metagenomes are clustered according to their similarity. The functional contents of solar panels 1 and 3 were compared to each other with a Fisher’s exact test combined with the Newcombe-Wilson method for calculating confidence intervals (nominal coverage of 95%). As a multiple-hypothesis test correction, a false-discovery-rate (FDR) method was applied.
Trimmed sequences from both solar panels for the total DNA experiment were blasted against a database containing all sequences for the genera Thermo/Deinococcus. Only sequences with a positive hit in against this database were used for assembly them using different k-mers with the Abyss assembler. We performed a genome annotation in different steps i) ORFs were predicted with GeneMark version 3.2548, ii) rRNA version 1.250 for rRNA prediction, and iii) tRNA-Scan51 for tRNA prediction. The functional annotation using COG classification was performed using webMGA. DNAPlotter52 from the Artemis Package was used to represent a circular map of the pangenome.
Protein samples were precipitated with TCA (trichloroacetic acid) and pellets were dissolved with 75 μL of 50 mM ABC (ammonium bicarbonate). The protein concentration in the samples was determined by fluorometric analysis. Then, 10 μg of each sample were digested as described in the following protocol. Cysteine residues were reduced by 2 mM DTT (DL‐Dithiothreitol) in 50 mM ABC at 60 °C for 20 min. Sulfhydryl groups were alkylated with 5 mM IAM (iodoacetamide) in 50 mM ABC in the dark at room temperature for 30 min. IAM excess was neutralized with 10 mM DTT in 50 mM ABC, 30 min at room temperatura. Ecah sample was subjected to trypsin digestion with 250 ng (100 ng/μl) of sequencing grade modified trypsin (Promega) in 50 mM ABC at 37 °C overnight. The reaction was stopped with TFA (trifluoroacetic acid) at a final concentration of 0.1%. Final peptide mixture was concentrated in a speed vacuum and resuspended in 30 μL of 2% ACN, 0.1% TFA. Finally, 5 μl of each sample were loaded onto a trap column (NanoLC Column, 3 μ C18‐CL, 75 μm × 15 cm; Eksigen) and desalted with 0.1% TFA at 2 μl/min during 10 min.
The peptides were then loaded onto an analytical column (LC Column, 3 μ C18‐CL, 75 μm × 25 cm, Eksigen) equilibrated in 5% acetonitrile 0.1% FA (formic acid). Elution was carried out with a linear gradient of 5:35% B in A for 40 min (A: 0.1% FA; B: ACN, 0.1% FA) at a flow rate of 300 nl/min in a label free mode. Peptides were analyzed in a mass spectrometer nanoESI qQTOF (5600 TripleTOF, ABSCIEX). The tripleTOF was operated in information‐dependent acquisition mode, in which a 0.25‐s TOF MS scan from 350–1250 m/z, was performed, followed by 0.05‐s product ion scans from 100–1500 m/z on the 25 most intense 2–5 charged ions.
ProteinPilot default parameters were used to generate a peak list directly from 5600 TripleTof wiff files. The Paragon algorithm of ProteinPilot was used to search NCBI protein database with the following parameters: trypsin specificity, cys‐alkylation, no taxonomy restriction, and the search effort set to through. To avoid using the same spectral evidence in more than one protein, the identified proteins were grouped based on MS/MS spectra by the Protein‐Pilot Progroup algorithm. The PeakView v 1.1 (ABsciex) software was used to generate the peptides areas from Protein Pilot result files and to perform a principal component (PCA) and a t‐test analysis.
How to cite this article: Dorado-Morales, P. et al. A highly diverse, desert-like microbial biocenosis on solar panels in a Mediterranean city. Sci. Rep. 6, 29235; doi: 10.1038/srep29235 (2016).
Corliss, J. B. et al. Submarine thermal sprirngs on the galapagos rift. Science 203, 1073–1083 (1979).
Singh, A. & Lal, R. Sphingobium ummariense sp. nov., a hexachlorocyclohexane (HCH)-degrading bacterium, isolated from HCH-contaminated soil. Int. J. Syst. Evol. Microbiol. 59, 162–166 (2009).
Neilson, J. W. et al. Life at the hyperarid margin: novel bacterial diversity in arid soils of the Atacama Desert, Chile. Extremophiles 16, 553–566 (2012).
Rosche, B., Li, X. Z., Hauer, B., Schmid, A. & Buehler, K. Microbial biofilms: a concept for industrial catalysis? Trends Biotechnol. 27, 636–643 (2009).
Williamson, A. J. et al. Microbial reduction of U(VI) under alkaline conditions: implications for radioactive waste geodisposal. Environ. Sci. Technol. 48, 13549–13556 (2014).
Pham, N. T. A. & Anonye, B. O. Vying over spilt oil. Nat. Rev. Microbiol. 12, 156 (2014).
Martin, L. J. et al. Evolution of the indoor biome. Trends Ecol. Evol. 30, 223–232 (2015).
Adams, R. I., Bateman, A. C., Bik, H. M. & Meadow, J. F. Microbiota of the indoor environment: a meta-analysis. Microbiome 3, 49 (2015).
Mahnert, A., Moissl-Eichinger, C. & Berg, G. Microbiome interplay: plants alter microbial abundance and diversity within the built environment. Front. Microbiol. 6, 887 (2015).
Robertson, C. E. et al. Culture-independent analysis of aerosol microbiology in a metropolitan subway system. Appl. Environ. Microbiol. 79, 3485–3493 (2013).
Leung, M. H. Y., Wilkins, D., Li, E. K. T., Kong, F. K. F. & Lee, P. K. H. Indoor-air microbiome in an urban subway network: diversity and dynamics. Appl. Environ. Microbiol. 80, 6760–6770 (2014).
Afshinnekoo, E. et al. Geospatial Resolution of Human and Bacterial Diversity with City-Scale Metagenomics. Cell Syst. 1, 72–87 (2015).
Römling, U., Galperin, M. Y. & Gomelsky, M. Cyclic di-GMP: the first 25 years of a universal bacterial second messenger. Microbiol. Mol. Biol. Rev. 77, 1–52 (2013).
Diaconu, M. et al. Structural basis for the function of the ribosomal L7/12 stalk in factor binding and GTPase activation. Cell 121, 991–1004 (2005).
Baykov, A. A., Malinen, A. M., Luoto, H. H. & Lahti, R. Pyrophosphate-fueled Na+ and H+ transport in prokaryotes. Microbiol. Mol. Biol. Rev. 77, 267–276 (2013).
Etchegaray, J. P. & Inouye, M. CspA, CspB, and CspG, major cold shock proteins of Escherichia coli, are induced at low temperature under conditions that completely block protein synthesis. J. Bacteriol. 181, 1827–1830 (1999).
Cascales, E., Bernadac, A., Gavioli, M., Lazzaroni, J.-C. & Lloubes, R. Pal Lipoprotein of Escherichia coli Plays a Major Role in Outer Membrane Integrity. J. Bacteriol. 184, 754–759 (2002).
Rothfuss, H. Involvement of the S-layer proteins Hpi and SlpA in the maintenance of cell envelope integrity in Deinococcus radiodurans R1. Microbiology 152, 2779–2787 (2006).
Zhang, Q. et al. Hymenobacter xinjiangensis sp. nov., a radiation-resistant bacterium isolated from the desert of Xinjiang, China. Int. J. Syst. Evol. Microbiol. 57, 1752–1756 (2007).
Zhang, G. et al. Hymenobacter psychrotolerans sp. nov., isolated from the Qinghai–Tibet Plateau permafrost region. Int. J. Syst. Evol. Microbiol. 58, 1215–1220 (2008).
Yi, T. H., Han, C.-K., Srinivasan, S., Lee, K. J. & Kim, M. K. Sphingomonas humi sp. nov., isolated from soil. J. Microbiol. 48, 165–169 (2010).
Kim, M. K. et al. Sphingomonas kaistensis sp. nov., a novel alphaproteobacterium containing pufLM genes. Int. J. Syst. Evol. Microbiol. 57, 1527–1534 (2007).
Buczolits, S., Denner, E. B. M., Kämpfer, P. & Busse, H.-J. Proposal of Hymenobacter norwichensis sp. nov., classification of ‘Taxeobacter ocellatus’, ‘Taxeobacter gelupurpurascens’ and ‘Taxeobacter chitinovorans’ as Hymenobacter ocellatus sp. nov., Hymenobacter gelipurpurascens sp. nov. and Hymenobacter chitinivo. Int. J. Syst. Evol. Microbiol. 56, 2071–2078 (2006).
Dastager, S. G., Lee, J.-C., Ju, Y.-J., Park, D.-J. & Kim, C.-J. Rubellimicrobium mesophilum sp. nov., a mesophilic, pigmented bacterium isolated from soil. Int. J. Syst. Evol. Microbiol. 58, 1797–1800 (2008).
Fujii, K. et al. Novosphingobium tardaugens sp. nov., an oestradiol-degrading bacterium isolated from activated sludge of a sewage treatment plant in Tokyo. Int. J. Syst. Evol. Microbiol. 53, 47–52 (2003).
Tian, B. & Hua, Y. Carotenoid biosynthesis in extremophilic Deinococcus-Thermus bacteria. Trends Microbiol. 18, 512–520 (2010).
Gutman, J. et al. Interactions of glycosphingolipids and lipopolysaccharides with silica and polyamide surfaces: adsorption and viscoelastic properties. Biomacromolecules 15, 2128–2137 (2014).
Rainey, F. A. et al. Extensive diversity of ionizing-radiation-resistant bacteria recovered from Sonoran Desert soil and description of nine new species of the genus Deinococcus obtained from a single soil sample. Appl. Environ. Microbiol. 71, 5225–5235 (2005).
de Groot, A. et al. Deinococcus deserti sp. nov., a gamma-radiation-tolerant bacterium isolated from the Sahara Desert. Int. J. Syst. Evol. Microbiol. 55, 2441–2446 (2005).
Hirsch, P. et al. Hymenobacter roseosalivarius gen. nov., sp. nov. from continental Antartica soils and sandstone: bacteria of the Cytophaga/Flavobacterium/Bacteroides line of phylogenetic descent. Syst. Appl. Microbiol. 21, 374–383 (1998).
Nübel, U., Garcia-Pichel, F. & Muyzer, G. The halotolerance and phylogeny of cyanobacteria with tightly coiled trichomes (Spirulina Turpin) and the description of Halospirulina tapeticola gen. nov., sp. nov. Int. J. Syst. Evol. Microbiol. 50 Pt 3, 1265–1277 (2000).
Alarico, S. et al. Rubritepida flocculans gen. nov., sp. nov., a new slightly thermophilic member of the alpha-1 subclass of the Proteobacteria. Syst. Appl. Microbiol. 25, 198–206 (2002).
Yoon, J.-H., Kang, S.-J., Lee, S.-Y. & Oh, T.-K. Sphingomonas insulae sp. nov., isolated from soil. Int. J. Syst. Evol. Microbiol. 58, 231–236 (2008).
Pradhan, S. et al. Bacterial biodiversity from Roopkund Glacier, Himalayan mountain ranges, India. Extremophiles 14, 377–395 (2010).
Yang, Y. et al. Deinococcus aerius sp. nov., isolated from the high atmosphere. Int. J. Syst. Evol. Microbiol. 59, 1862–1866 (2009).
Yoo, S.-H. et al. Roseomonas aerilata sp. nov., isolated from an air sample. Int. J. Syst. Evol. Microbiol. 58, 1482–1485 (2008).
Crous, P. W., Summerell, B. A., Mostert, L. & Groenewald, J. Z. Host specificity and speciation of Mycosphaerella and Teratosphaeria species associated with leaf spots of Proteaceae. Persoonia 20, 59–86 (2008).
Sláviková, E., Vadkertiová, R. & Vránová, D. Yeasts colonizing the leaf surfaces. J. Basic Microbiol. 47, 344–350 (2007).
Zakharova, K. et al. Microcolonial fungi on rocks: a life in constant drought? Mycopathologia 175, 537–547 (2013).
Rosselli, R. et al. Microbial immigration across the Mediterranean via airborne dust. Sci. Rep. 5, 16306 (2015).
Shirakawa, M. A. et al. Microbial colonization affects the efficiency of photovoltaic panels in a tropical environment. J. Environ. Manage. 157, 160–167 (2015).
Sim, K. et al. Improved detection of bifidobacteria with optimised 16S rRNA-gene based pyrosequencing. PLoS One 7, e32543, 10.1371/journal.pone.0032543 (2012).
La Duc, M. T., Vaishampayan, P., Nilsson, H. R., Torok, T. & Venkateswaran, K. Pyrosequencing-derived bacterial, archaeal, and fungal diversity of spacecraft hardware destined for Mars. Appl. Environ. Microbiol. 78, 5912–5922 (2012).
Edgar, R. C., Haas, B. J., Clemente, J. C., Quince, C. & Knight, R. UCHIME improves sensitivity and speed of chimera detection. Bioinformatics 27, 2194–2200 (2011).
Ames, S. K. et al. Using populations of human and microbial genomes for organism detection in metagenomes. Genome Res. 25, 1056–1067 (2015).
Simpson, J. T. et al. ABySS: a parallel assembler for short read sequence data. Genome Res. 19, 1117–1123 (2009).
Zerbino, D. R. & Birney, E. Velvet: algorithms for de novo short read assembly using de Bruijn graphs. Genome Res. 18, 821–829 (2008).
Besemer, J., Lomsadze, A. & Borodovsky, M. GeneMarkS: a self-training method for prediction of gene starts in microbial genomes. Implications for finding sequence motifs in regulatory regions. Nucleic Acids Res. 29, 2607–2618 (2001).
Wu, S., Zhu, Z., Fu, L., Niu, B. & Li, W. WebMGA: a customizable web server for fast metagenomic sequence analysis. BMC Genomics 12, 444 (2011).
Lagesen, K. et al. RNAmmer: consistent and rapid annotation of ribosomal RNA genes. Nucleic Acids Res. 35, 3100–3108 (2007).
Lowe, T. M. & Eddy, S. R. tRNAscan-SE: a program for improved detection of transfer RNA genes in genomic sequence. Nucleic Acids Res. 25, 955–964 (1997).
Carver, T., Thomson, N., Bleasby, A., Berriman, M. & Parkhill, J. DNAPlotter: circular and linear interactive genome visualization. Bioinformatics 25, 119–120 (2009).
The authors are indebted to the Vicerrectorat d’Infraestructures (University of Valencia) for their support before and during sampling. Biopolis SL funded this work. C.V. is a recipient of a FPU (Formación de Personal Universitario) grant from the Spanish MECD (Ministerio de Educación, Cultura y Deporte). We also thank the proteomics service (SCSIE) of the University of Valencia for its technical support and Fabiola Barraclough for English revision.
The authors declare no competing financial interests.
About this article
Cite this article
Dorado-Morales, P., Vilanova, C., Peretó, J. et al. A highly diverse, desert-like microbial biocenosis on solar panels in a Mediterranean city. Sci Rep 6, 29235 (2016). https://doi.org/10.1038/srep29235
Animal Microbiome (2020)
Environmental Microbiome (2020)
Scientific Reports (2020)