Abstract
Contemporary applications of radar altimetry include sea-level rise, ocean circulation, marine gravity and icesheet elevation change. Unlike InSAR and GNSS, which are widely used to map surface deformation, altimetry is neither reliant on highly temporally-correlated ground features nor as limited by the available spatial coverage and can provide long-term temporal subsidence monitoring capability. Here we use multi-mission radar altimetry with an approximately 23 year data-span to quantify land subsidence in cropland areas. Subsidence rates from TOPEX/POSEIDON, JASON-1, ENVISAT and JASON-2 during 1992–2015 show time-varying trends with respect to displacement over time in California’s San Joaquin Valley and central Taiwan, possibly related to changes in land use, climatic conditions (drought) and regulatory measures affecting groundwater use. Near Hanford, California, subsidence rates reach 18 cm yr−1 with a cumulative subsidence of 206 cm, which potentially could adversely affect operations of the planned California High-Speed Rail. The maximum subsidence rate in central Taiwan is 8 cm yr−1. Radar altimetry also reveals time-varying subsidence in the North China Plain consistent with the declines of groundwater storage and existing water infrastructure detected by the Gravity Recovery And Climate Experiment (GRACE) satellites, with rates reaching 20 cm yr−1 and cumulative subsidence as much as 155 cm.
Similar content being viewed by others
Introduction
Land subsidence is caused by natural and/or anthropogenic processes including subsurface fluid extraction, underground mining, drainage of organic soils, sediment compaction/load in coastal regions and permafrost degradation1,2. Globally, in regions with irrigated agriculture and rapid population growth, groundwater extraction typically is the principal cause of subsidence1,3,4. Subsidence is a hazard that increases flood risk, causes damages to man-made structures and cultural heritages in low-lying regions, exacerbates sea level rise in coastal regions and results in significant socio-economic distress1,5. Standard tools for monitoring subsidence are precision leveling, Global Navigation Satellite System (GNSS), interferometric synthetic aperture radar (InSAR) and borehole extensometers1,4,6. Satellite gravimetry from the Gravity Recovery And Climate Experiment (GRACE7) can deduce groundwater mass changes at a coarse spatial resolution (350 km or greater). Currently, a large percentage of lands including croplands is threatened by subsidence, erosion and desertification which are affecting global food safety8. By 2050, an estimated two billion more people will need to be fed, increasing demand on agricultural land use for improved rates of food production9. For irrigated croplands dependent solely on groundwater or on the conjunctive use of surface water and groundwater, high rates of groundwater extraction can lead to unsustainable cropland practices owing to groundwater depletion. These practices can result in undesirable effects including irreversible aquifer-system compaction and land subsidence in susceptible aquifer systems, which can be exacerbated during droughts1,2,10.
This study explores the use of satellite radar altimetry for improved monitoring of subsidence in three irrigated cropland areas: California’s San Joaquin Valley (SJV), central Taiwan (CT) and the North China Plain (NCP). The three croplands areas are affected by historical and ongoing subsidence3,11,12,13,14,15,16, where groundwater extraction is the leading cause of subsidence2,6,12,16 and recent droughts have exacerbated groundwater depletion and its consequences in the SJV and the NCP13,17. Subsidence poses risks to existing high speed railways in CT, the NCP and one under construction in the SJV4. Subsidence patterns and rates in much of the NCP, SJV and CT have been extensively studied using precision leveling, extensometry, InSAR and GNSS4,6,14,15,18.
A synthesis of vertical displacement rates (VDRs) measured at 1,499 GNSS stations (Table S1 and Fig. S1, Sec. S1, Supplementary Information [SI]) between 1993 and 2015 across the Central Valley (including the SJV and the southern portion of the Sacramento Valley), California, show that the distribution of the GNSS sites within the valley are too sparse by themselves to map areal subsidence in adequate spatial detail (Fig. 1). Three coalescing subsidence bowls are evident: a southern bowl south of Bakersfield corresponding to the Arvin-Maricopa historical subsidence bowl19, a central bowl between Bakersfield and Fresno roughly centered on the Tulare-Hanford area and roughly corresponding to the Tulare-Wasco historical subsidence bowl19 and a northern bowl north of Fresno roughly centered on the Madera-Mendota area near the Delta-Mendota Canal15, which is located along the western edge of the San Joaquin Valley (Fig. 1). In general, the GNSS-derived subsidence rates are relatively large in the Tulare-Hanford area (maximum: 9.8 cm yr−1) and the rates decay southward and northward in the SJV to near zero. In the mountainous regions surrounding the Central Valley, the VDRs are largely positive, suggesting uplifts possibly caused by tectonics and reduced mass loading due to the current drought in California20. The mean subsidence rate in the central subsidence bowl (from Bakersfield to Fresno) is 2.86 cm yr−1, compared with 0.62 cm yr−1 in the northern subsidence bowl and smaller mean rates in the Sacramento Valley. Note that a negative vertical displacement rate determined in this paper (in all relevant figures and tables) corresponds to a positive subsidence rate. To emphasize land subsidence in this paper, we replace negative displacement rates by subsidence rates in all descriptions.
Mean subsidence rates during 2002–14 in CT derived from annual precision leveling ranged from zero to about 8 cm yr−1 (Fig. 2a, Sec. S2, SI). Despite its high accuracy, precision leveling can be costly4 and generally is not repeated frequently enough to resolve inter-annual and annual signals. About 310,000 pumping wells in Changhua and Yunlin Counties pump groundwater to meet agricultural and industrial water demands (Fig. 2b). Two major coalescing subsidence bowls are evident—on either side of the Zhuoshui River and subsidence rates as much as 7 cm yr−1 threaten the operation of the Taiwan High Speed Rail4 (THSR; Fig. 2a) and sustainable development in the region. For example, the prevalence of fine-grained sediments here makes this area more susceptible to compaction. Though pumping-well distribution is even, subsidence rates are not, suggesting a significant spatial variation of hydrogeological properties6.
The NCP has a population of 437 million and an area of 300,000 km2 and is one of many regions in China with critical subsidence problems16,21. In the NCP, groundwater provides more than 60% of fresh water supplies22 and is the main water source for agricultural irrigation23. Near Tianjin, the mean subsidence rates range from 0.80 to 5.60 cm yr−1, with a maximum rate of 16 cm yr−1 and cumulative subsidence of 3.90 m during 1965–8518,24. The GRACE satellite gravimetry data have detected mass losses that are attributed to severe groundwater storage declines in the SJV and NCP13,22.
In this paper, we explore satellite altimetry as a new remote-sensing subsidence-mapping method and demonstrate its utility in cropland areas where the differential and persistent scatterer (PS)-based InSAR methods are limited by sparse temporally-coherent, stable radar reflectors3; however, improvements in identifying PS scatterers over agricultural regions have been reported25,26. We also demonstrate the temporal and along-track spatial detail of the radar altimetry method compared to GNSS (Fig. S1) and leveling (Fig. S2) which can be cost prohibitive to map subsidence in similar temporal and spatial detail. Satellite altimetry has been principally used to derive marine gravity/bathymetry and to study ocean circulations, sea level rise, ice sheet elevation and water level changes27,28,29. Because only a few studies have used satellite altimetry to measure solid earth deformation and a standard numerical procedure to measure vertical displacement has not yet been established, there are concerns about the accuracies of altimeter-derived rates30,31. However, this study shows that, accurate VDRs at the sub-cm yr−1 level can be achieved using satellite altimetry by using more than two decades of near-continuous land surface elevation measurements from the improved coverage offered from multi-mission altimeter data with 10-day or monthly sampling: TOPEX/POSEIDON (TP, 1992–2002), JASON-1 (J1, 2002–09), JASON-2 (J2, 2008–present) and ENVISAT (EN, 2002–10). TP, J1 and J2 have the same repeated ground tracks.
Results
Subsidence rates derived from satellite radar altimetry (TP and EN) agree well with rates determined from precision leveling in CT and GNSS in the southern SJV (Fig. 3). Height changes derived from different radar altimetry missions also agree well. For example, in the SJV at the crossover of TP-043 and EN-684 (Fig. 3a), the time-series height changes derived from J1 (the follow-on mission for TP) and EN (Fig. S6, 2002–10) and the resulting subsidence rates (about 6 cm yr−1) show good agreement. Three major subsiding bowls identified in the SJV from the GNSS measurements (Fig. 1) are reflected in the TP and EN along-track subsidence profiles. Along TP-043, the largest altimeter-derived subsidence rate near Hanford (A2, Fig. 3a) in the central subsidence bowl is about 10 cm yr−1 and consistent with the GNSS-derived rates (Table S1). At GNSS stations P056 and P566, subsidence rates are <4 cm yr−1 and agree with the altimeter-derived rates to 1 cm yr−1. The largest subsidence rate from EN is ~13 cm yr−1 along EN-611 (A1, Fig. 3b). In CT, the two principal subsidence bowls identified by leveling (Fig. 2a) are reflected in the TP and EN along-track subsidence profiles and the patterns and rates are consistent with those from leveling (Fig. 3d–f).
Subsidence patterns in the SJV and CT are time-varying and could be influenced by changing groundwater use related to land-use, climatic and regulatory factors. Figure 4 shows patterns in the VDRs along profiles near Hanford in the SJV and in Tuku Township, CT (Fig. S7, Sec. S4, SI). In Box 1 (Fig. 4a), the VDRs derived from TP, J1 and J2 for the SJV show a consistent pattern from J1 and J2: a steep drop (increased subsidence rate) followed by a bump (decreased subsidence rate) in the profile. The drop in Box 1 reaches its lowest point (maximum subsidence rate) at 36.1158° N, 119.6858° W (red star, Fig. 4a). In Box 2 (Fig. 4a), the subsidence extent is expanding and the rates are accelerating during the period covered by the altimetry. At the location of maxium subsidence (Fig. 5), the VDR during Oct 1992–Jul 2002 is 6 cm yr−1, increasing to 8 cm yr−1 during Jan 2002–Jan 2009 and to 18 cm yr−1 during Jul 2008–Feb 2015. The increased groundwater pumping owing to the recent ongoing drought in California may partially contribute to the increased rate from J2. The subsidence rates in the SJV are time-varying: in Box 3 (Fig. 4a), initially the rates are about 6 cm yr−1 (TP), decrease to 3 cm yr−1 (J1) and increase to 7 cm yr−1 (J2).
The rates in CT also vary with time and space. In Box 4 (Fig. 4b), the subsidence rates increased in recent years. In Box 5 (Fig. 4b), between 23.60°N and 23.75°N, the changes in the subsidence rates from TP to J2 show the extent of subsidence shrinks (from green lines to red lines) in recent years. The location of maximum subsidence shifts northward to about 23.72°N and the extent of subsidence increases northward from 23.71 to 23.85°N. The shifts in patterns likely are due to measures restricting groundwater use along a section of THSR near the point of maximum subsidence (Figs S7 and S8).
Land subsidence can cause angular deflection (AD) of the THSR owing to vertical displacements of the individual structural support columns of the elevated railway. A large AD could weaken the foundational support of the railway and result in serious operational problems if not adequately mitigated4. Along the THSR section in Yunlin County (Fig. 2a), heavy groundwater pumping and heterogeneity of sediments with varying degrees of compressibility have led to large ADs, which once approached the 1/1000 limit set by the safety code. TP-051 is nearly parallel to THSR near Tuku (see Fig. S7) and altimetry data have already provided valuable observations to monitor ADs here. The planned California High-Speed Rail (CHSR) now faces the same potential risk of large ADs as the TSHR does: it passes through a region that has been experiencing subsidence due to heavy groundwater depletion. As it happens, EN-684 and TP-043 are perpendicular to the planned route of CHSR near Hanford and the observations from EN and TP follow-on missions can provide an effective means to monitor the subsidence as well as the ADs in the future.
EN identifies two regions of major cropland subsidence in the NCP (Fig. 6, also Figs S9–12): Region 1 covers eastern Hebei Province and northern Shandong Province, with an affected area of 67,900 km2; Region 2 covers eastern Henan Province and northern Anhui Province, with an affected area of 78,000 km2. In the foothills of the NCP, VDRs derived from EN and TP and J2 are indeterminate because the altimetry waveforms are corrupted (see Waveform E, Fig. 7). The J1 rates contain large uncertainties in much of the NCP and are not shown here. TP and J2 detect time-varying subsidence elsewhere in the NCP (Fig. 8). For example, in Boxes 1 and 2 (Fig. 8), located in the Hebei and Anhui provinces, the along-track rates increased dramatically from the time of TP to the time of J2. In Box 3 (Fig. 8), near Tianjin, the J2 subsidence rates are less than those from TP, suggesting that groundwater extraction was reduced here due to measures implemented to control subsidence since the start of high-speed rail operations (Fig. S9). In Box 4 (Fig. 8), many VDRs were derived from TP, but only a few from J2. This is attributed to urbanization around this region, where new man-made structures (at the time of J2) contaminated altimeter waveforms and degraded ranging accuracies (see Waveform D, Fig. 7). The altimeter results identify many subsidence-affected areas and changing subsidence patterns in the NCP that are consistent with the temporal and spatial groundwater storage changes detected by GRACE22. The results can be used as guides for future, more detailed, precise geodetic and geotechnical measurements.
Discussion
The causes for subsidence are complicated and not well understood in the study regions (SJV, CT and NCP). Groundwater abstraction may be a major contributing source for land subsidence. Near the point with the largest subsidence in SJV, operations in factory and cattle farms, such as those shown in Box 1 and 2 in Fig. 4a, may contribute partially to the steep subsidence observed along the profiles through abstraction of large amounts of groundwater. Along the THSR in CT, heavy groundwater extraction from surrounding factories, such as a tire factory (Fig. 4b), may be responsible for land subsidence. However, more studies are needed to investigate the roles of the farms and factories on the land subsidence detected in this paper.
Long-term, time-varying land subsidence over croplands from 1992 to present has been determined by TP, J1, J2 and EN altimeters using a dedicated processing method for land altimeter data. The result in the NCP suggests that a mission with a long repeat period and relatively small cross-track spacing (<50 km) like EN can measure cropland subsidence over a large area. The application of altimetry to subsidence monitoring can be extended globally to other croplands, especially in areas where terrestrial-geodetic subsidence monitoring methods may be lacking. The GNSS and leveling-derived vertical displacement rates in the SJV and CT are used to assess the accuracies of satellite altimetry, which are better than the one cm yr−1 level. Current altimetry technologies can detect subsidence at a 1-km along-track spatial resolution (c.f. Methods for details) and likely will improve as the technologies evolve. Combined use of leveling, GNSS, InSAR and radar altimetry methods for measuring, mapping and monitoring surface deformation and subsidence in particular, would optimally leverage the strengths of each of the different techniques to best address the scientific needs.
Methods
A satellite-borne radar altimeter measures the two-way time delay of the radar pulse which is used to compute the distance between the satellite and the Earth’s surface and after computing the precise orbit of the satellite, the altitude of the surface can be computed. Repeat-period altimetry can be used to measure changes in altitude (height) or height changes of the surface. The ground tracks are re-visited by the satellite at regular time intervals of weeks and within about ±1 km of the reference track at the equator. Figure 7a shows the altimeter waveforms from the Pacific Ocean off the coast of California eastward to the SJV and the Sierra Nevada. The same evolution of waveforms is also demonstrated for the NCP (Fig. 7b). The Brown waveforms over the ocean (Waveform A, Fig. 7) and coast (Waveform B, Fig. 7) may result in precise range measurements for marine applications, but waveforms on land may be too contaminated to recover precise ranges for detecting height changes.
The waveform over flat terrain with crops (Waveform C, Fig. 7) or with snowpack, e.g., land regions near Hudson Bay, Canada29,30,31 can be retracked to yield a precise range change, after correcting surface gradients using the collinear track analysis. The surface roughness of croplands diffuses radar pulses, similar to wind-induced, small-scale waves in oceans. The surface of a fallow, flat and building-free cropland is similar to a calm lake surface—the altimeter waveform is specular with a steep leading edge compared to other types of waveform. In summer, the cropland surface roughens as crops grow, resulting in a waveform with a less steep leading edge. Similar to a significant wave height at sea, terrain undulation creates a ranging bias and modulates the footprint size of a pulse-limited radar. For example, a terrain undulation of 1 m at a length scale of several km leads to a pulse-limited footprint radius of about 1 km for EN and slightly larger for the TP series altimeters28,29 (pulse width = 3.125 ns). However, unlike significant wave height at sea, terrain undulation at a given location can remain constant for the satellite mission period and the undulation-induced ranging bias will be eliminated when heights from repeat cycles are differenced.
Here we adopted a modified, enhanced version of the repeat-track method32,33,34 for the space and time reduction of raw height measurements from TP, J1, J2 and EN. For EN, we also estimated parameters that account for the effects of backscatter and the slopes of the leading and trailing edges32,35. For all missions, we chose to compute VDRs for bins spaced at about 1 km along satellite ground tracks. A bin is a circular region with a given radius, centered at a location along the mean ground track of all repeat cycles in a satellite mission. Over a flat cropland with a moderate undulation of about 1 m, the radius of an altimeter footprint is about 1 km. Within a given bin, all the raw height measurements (the sampling rate is 18 Hz for EN and 10 Hz for TP, J1 and J2) from the repeat cycles were least-squares fitted to the following space and time function3:
where
: height from altimeter, with range correction from the subwaveform threshold retracker (see below).
j: repeat cycle.
i: the i th measurement from repeat cycle j in the bin.
ϕ0, λ0: geodetic latitude and longitude of the bin center
ϕ, λ, t: geodetic latitude and longitude and time of
t0: reference time.
H0(ϕ0, λ0): mean height at the bin center for all repeat cycles.
: residual of .
sx, sy, sxx, syy, sxy: coefficients of a 2nd order surface fitting of the heights from all repeat cycles within a radius centered at the bin.
: initial rate of height change and initial annual terms used to improve the 2nd order surface fitting.
b, l, τ: effects of backscatter and the slopes of the leading edge and trailing edge of waveform on .
f (b, l, τ): a function to model the effects b, l, τ. Note that these effects are not modeled in the waveforms of TP, J1 and J2 because they are not available.
The function f (b,l,τ) in Eq. (1) is expressed as
where and are the means of b, l and τ from all repeat cycles in the bin and Cb,Cl and Ct are the parameters that adjust these effects. For EN, up to 12 parameters could be estimated (see Table S2). We used a robust least-squares estimator, which is resilient against outliers, to estimate the parameters in Eq. (1) as follows. The first-round estimated parameters used all height measurements. Then, the residuals of the measurements and the standard deviations of the residuals were computed. We then used the three-σ outlier threshold to remove anomalous heights: if a residual is three times larger than its standard deviation, the corresponding measurement was removed and the next-round parameter estimation was carried out. The final parameters were estimated from the measurements that pass the three-σ testing. Also, if the standard deviation of the residuals in a bin were larger than 5 m, the vertical rate in the bin was not computed.
Then, the space and time corrected was computed as (the time correction accounts for the b, l, τ effects and is for EN data only)
where T is the sum of terms 2–6 in Eq. (1) and is regarded as a corrected height at the bin center at time t. For a given cycle j, we used the three-σ threshold to remove anomalous values in the bin and then compute the representative height for cycle j:
where is an acceptable height measurement and n is the number of such measurements. With computed for all repeat cycles in the given bin (the mean position is at ϕ0, λ0), a time series of height was formed and least-squares fitted to the function
where are the mean, VDR and vertical acceleration and e and f account for the seasonal variation of height. Again, we used the robust least-squares estimator to determine the parameters in Eq. (5). Note that the terms in Eq. (1) are just the initial estimates for VDR and annual variations; the final VDR is and the amplitudes of the annual variations are e and f. In Sec. S3 of Supplementary Information (SI), we selected an optimal waveform retracker to recover precise ranges from TP, J1, J2 and EN from waveforms like Waveform C in Fig. 7 for the SJV and NCP. Note that backscatter effects are not considered for TP, J1 and J2 in this study because of a lack of the necessary data.
The repeat-track method also diminishes the anisotropy roughness effect due to non-circular radar polarization, which causes different radar echoes for descending and ascending passes for the EN altimeter system. In fact, such height measurements do not repeat the exact same locations (maximum lateral offset: 1 km) and the measurements are affected by a number of time-varying factors. As a summary, the following conditions should be met to obtain precise heights on land: (a) sufficiently flat terrain within the altimeter footprint that may be covered with short vegetation, such as crops, (b) low percentage of buildings in the footprint area, (c) use of a proper waveform retracker and (d) proper accounting of radar backscatter effects using an empirical threshold value. Parts of the croplands in the SJV, CT and the NCP meet conditions (a,b). If the proportion of cropland within a “bin” of selected and processed data is greater than 50%, the accuracy of the resulting altimeter-derived VDR is generally better than 1 cm yr−1 (at 1-km resolution), based on the assessments using leveling data (CT, Table S3) and crossover differences (CT and NCP, Table S4).
Typically, there will be inter-mission altimeter range biases between two altimeter missions and such biases depend on surface attributes (ocean, land, ice and river, etc). The combination of inter-mission altimeter bias and terrain-induced height difference between reference tracks will lead to an apparent discontinuity between the two time series of height changes from two satellite missions at the crossovers of two ground tracks (Fig. S6). Because the VDRs in this study are computed for individual satellites and are the time derivatives of heights, the inter-mission discontinuities will not affect individual rates. In this study, we compute the cumulative subsidence, S, at a given bin from multiple satellite missions, such as TP, J1 and J2, using
where and are the mean rates from TP, J1 and J2 and TTP,TJ1 and TJ2 are the time spans over which rates are computed. For example, at the locations corresponding to Figs 5 and S6, the cumulative subsidence values from Oct 1992 to Feb 2015 are 206 cm and 153 cm, respectively.
Given a height time series (see Figs 5 and S6, S9–S12), both the VDR and its uncertainty (one-standard deviation, at the 68% confidence level) are computed (see Eq. S5) and they can be used to determine the rate’s signal-to-noise ratio for decision making. Because of the influence of height oscillations (the key component is annual oscillation), the uncertainty of a VDR tends to decrease with the length of time series. As such, the altimetry method in this paper would be more applicable to long-term (longer than one year) subsidence monitoring.
Additional Information
How to cite this article: Hwang, C. et al. Time-varying land subsidence detected by radar altimetry: California, Taiwan and north China. Sci. Rep. 6, 28160; doi: 10.1038/srep28160 (2016).
References
Galloway, D. L. In Encyclopedia of Natural Hazards (ed. Bobrowsky, P. T. ) 979–985 (Springer, 2013).
Galloway, D. L. & Sneed, M. Analysis and simulation of regional subsidence accompanying groundwater abstraction and compaction of susceptible aquifer systems in the USA. Bol. Soc. Geol. Mex. 65, 123–134 (2013).
Galloway, D. L. & Burbey, T. J. Review: regional land subsidence accompanying groundwater extraction. Hydrogeol. J. 19, 1459–1486 (2011).
Hwang, C., Hung, W. C. & Liu, C. H. Results of geodetic and geotechnical monitoring of subsidence for Taiwan High Speed Rail operation. Nat. Hazards 47, 1–16 (2008).
Land Subsidence Working Group of the United Nations Educational, Scientific and Cultural Organization (UNESCO), http://landsubsidence-unesco.org/ (Date of access: 01/06/2015) (2015).
Hung, W. C. et al. Monitoring severe aquifer-system compaction and land subsidence in Taiwan using multiple sensors: Yunlin, the southern Choushui River Alluvial Fan. Environ. Earth Sci. 59, 1535–1548 (2010).
Tapley, B. D., Bettadpur, S., Ries, J. C., Thompson, P. F. & Watkins, M. M. GRACE measurements of mass variability in the Earth system. Science 305, 503–505 (2004).
Smith, P. Delivering food security without increasing pressure on land. Glob Food Sec. 2, 18–23 (2013).
Fritz, S. et al. The need for improved maps of global cropland, EOS 94, 31–32 (2013).
Faunt, C. C. Groundwater Availability of the Central Valley Aquifer, California: U.S. Geological Survey Professional Paper 1766. Technical report. Available at: http://pubs.usgs.gov/pp/1766/ (Date of access: 04/06/2015) (2009).
Hung, W. C. et al. Surface deformation from persistent scatterers SAR interferometry and fusion with leveling data: A case study over the Choushui River Alluvial Fan, Taiwan. Remote Sens. Environ. 115, 957–967 (2011).
Hung, W. C., Hwang, C., Liou, J. C., Lin, Y. S. & Yang, H. L. Modeling aquifer-system compaction and predicting land subsidence in central Taiwan. Engineering Geology 147, 78–90 (2012).
Famiglietti, J. S. et al. Satellites measure recent rates of groundwater depletion in California’s Central Valley. Geophy. Res. Lett. 38, L03403 (2011).
Sneed, M. & Brandt, J. T. Detection and measurement of land subsidence using Global Positioning System and interferometric synthetic aperture radar, Coachella Valley, California, 1996–2005. Technical report. Available at: http://pubs.usgs.gov/sir/2007/5251/ (Date of access: 04/07/2015) (2013).
Sneed, M., Brandt, J. & Solt, M. Land subsidence along the Delta-Mendota Canal in the northern part of the San Joaquin Valley, California, 2003–10. Technical report. Available at: http://pubs.usgs.gov/sir/2013/5142/ (Date of access: 04/07/2015) (2013).
Liu, C., Yu, J. & Eloise, K. Groundwater exploitation and its impact on the environment in the North China Plain. Water International 26, 265–272 (2001).
Taylor, R. G. et al. Ground water and climate change. Nature Clim. Change 3, 322–329 (2013).
Xu, Y. S., Shen, S. L., Cai, Z. Y. & Zhou, G. Y. The state of land subsidence and prediction approaches due to groundwater withdrawal in China. Nat. Hazards 45, 123–135 (2008).
Ireland, R. L., Poland, J. F. & Riley, F. S. Land subsidence in the San Joaquin Valley, California, as of 1980. Technical report. Available at: http://www.calwater.ca.gov/Admin_Record/C-040893.pdf (Date of access: 04/06/2015) (1984).
Amos, C. B. et al. Uplift and seismicity driven by groundwater depletion in central California. Nature 509, 483–486 (2014).
Xue, Y., Zhang, Y., Ye, S., Wu, J. & Li, Q. Land subsidence in China. Environmental Geology 48, 713–720 (2005).
Feng, W. et al. Evaluation of groundwater depletion in North China using the Gravity Recovery and Climate Experiment (GRACE) data and ground-based measurements. Water Resour. Res. 49, 2110–2118 (2013).
Yang, Y., Yang, Y., Moiwo, J. P. & Hu, Y. Estimation of irrigation requirement for sustainable water resources reallocation in North China. Agricultural Water Management 97, 1711–1721 (2010).
Hu, R. L., Yue, Z. Q., Wang, L. C. & Wang, S. J. Review on current status and challenging issues of land subsidence in China. Engineering Geology 76, 65–77 (2004).
Chen, J., Zebker, H. A. & Knight, R. A persistent scatterer interpolation for retrieving accurate ground deformation over InSAR-decorrelated agricultural fields. Geophys. Res. Lett. 42, 9294–9301 (2015).
Farr, T. G., Jones, C. & Liu, Z. Progress Report: Subsidence in the Central Valley, California. Technical report. (2014) Available at: http://water.ca.gov/groundwater/docs/NASA_REPORT.pdf (Date of access: 17/02/2016).
Chelton, D. B., Ries, J. C., Haines, B. J., Fu, L. L. & Callahan, P. S. In Satellite Altimetry and Earth Sciences (eds Fu, L. L. & Cazenave, A. ) Ch. 1, 1–131 (Academic Press, 2000).
Sandwell, D. T., Müller, R. D., Smith, W. H. F., Garcia, E. & Francis, R. New global marine gravity model from CryoSat-2 and Jason-1 reveals buried tectonic structure. Science 346, 65–67 (2014).
Zwally, H. J. & Brenner, A. C. In Satellite Altimetry and Earth Sciences (eds Fu, L. L. & Cazenave, A. ) Ch. 9, 351–369 (Academic Press, 2000).
Lee, H., Shum, C., Yi, Y., Braun, A. & Kuo, C. Laurentia Glacial crustal motion observed using TOPEX/POSEIDON radar altimetry over land. J. Geodyn. 46, 182–193 (2008).
Kuo, C., Cheng, Y., Lan, W. & Kao, H. Monitoring vertical land motions in southwestern Taiwan with retracked TOPEX/Poseidon and Jason-2 satellite altimetry. Remote Sens. 7, 3808–3825 (2015).
Flament, T. & Rémy, F. Dynamic thinning of Antarctic glaciers from along-track repeat radar altimetry. J. Glaciology 58, 830–840 (2012).
Rémy, F., Flament, T., Michel, A. & Verron, J. Ice sheet survey over Antarctica using satellite altimetry: ERS-2, Envisat, SARAL/AltiKa, the key importance of continuous observations along the same repeat orbit. Int. J. of Remote Sens. 35, 5497–5512 (2014).
Lee, H., Shum, C., Kuo, C., Yi, Y. & Braun, A. Application of TOPEX altimetry for solid earth deformation studies. Terr. Atmos. Ocean. Sci. (TAO) 19, 37–46 (2008).
Yang, Y., Hwang, C. & E, D. A fixed full-matrix method for determining ice sheet height change from satellite altimeter: an ENVISAT case study in East Antarctica with backscatter analysis. J. Geod. 88, 901–914 (2014).
Wessel, P., Smith, W. H. F., Scharroo, R., Luis, J. F. & Wobbe, F. Generic Mapping Tools: Improved version released. EOS Trans. AGU 94, 409–410 (2013).
Becker, J. J. et al. Global bathymetry and elevation data at 30 arc seconds resolution: SRTM30_PLUS. Mar. Geod. 32, 355–371 (2009).
Latham, J., Cumani, R., Rosati, I. & Bloise, M. Global Land Cover SHARE (GLC-SHARE) database. Beta-V1.0 – 2014, Technical report. Available at: http://www.glcn.org/downs/prj/glcshare/GLC_SHARE_beta_v1.0_2014.pdf (Date of access: 25/04/2015) (2014).
Acknowledgements
We are grateful to JPL/NASA for the TOPEX/POSEIDON, JASON-1 and JASON-2 altimeter data, which are provided to our team through the web site of AVISO. ENVISAT altimeter data are provided by the European Space Agency. This work is supported by MOST/Taiwan Grant 103-2221-E-009-114-MY3, NSFC/China Grants 41429401 and 41374020 and MOST/China grant 2013CBA01804. NASA’s Concept in Advanced Geodesy Program (NNX12AK28G) and Belmont Forum/IGFA NSF Grant (ICER-1342644) partially supported the Ohio State University component of this research. The U.S. Geological Survey Cooperative Water and Groundwater Resources Programs supported portions of this work. The Landsat images were provided by: U.S. Geological Survey, Earth Resources Observation and Science (EROS) Center, 2015, Landsat products and services: EROS, Glovis Web page, accessed 29 September 2015 at http://glovis.usgs.gov/. The SPOT satellite images are courtesy of the Center for Space and Remote Sensing Research, National Central University (http://140.115.110.11/index_WMTS.php/). The terms of reference for using the SPOT images are as follows: Following the open data policy promoted by the Taiwan government, the Center for Space and Remote Sensing Research at National Central University provides free and open SPOT satellite images of the whole island of Taiwan from 1996 to 2014 to any organization or individual in Taiwan with a non-profit purpose.
Author information
Authors and Affiliations
Contributions
C.H. designed the project and wrote the first draft. Y.Y. computed the vertical displacement rates from altimetry and made some of the figures. R.K. and J.H. performed data and statistical analyses and made Figs 1,2,3,4,5,6,7,8 and most figures in Supplementary Information. C.K.S., D.L.G. and M.S. made critical suggestions and improved the draft. W.C.H. and Y.S.C. performed analyses of leveling data. F.L. provided computing resources and discussed the result with Y.Y.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Hwang, C., Yang, Y., Kao, R. et al. Time-varying land subsidence detected by radar altimetry: California, Taiwan and north China. Sci Rep 6, 28160 (2016). https://doi.org/10.1038/srep28160
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep28160
This article is cited by
-
A high-resolution time-variable terrestrial gravity field model of continental North China
Communications Earth & Environment (2024)
-
Identification of the correlation between land subsidence and groundwater level in Cangzhou, North China Plain, based on time-series PS-InSAR and machine-learning approaches
Hydrogeology Journal (2024)
-
Modeling of land subsidence using GIS-based artificial neural network in Yunlin County, Taiwan
Scientific Reports (2023)
-
Recent events of land subsidence in Alaknanda valley: a case study of sinking holy town Joshimath, Uttarakhand, India
Environment, Development and Sustainability (2023)
-
Extensometer forensics: what can the data really tell us?
Hydrogeology Journal (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.