Here, we efficiently generated transgenic cattle using two transposon systems (Sleeping Beauty and Piggybac) and their genomes were analyzed by next-generation sequencing (NGS). Blastocysts derived from microinjection of DNA transposons were selected and transferred into recipient cows. Nine transgenic cattle have been generated and grown-up to date without any health issues except two. Some of them expressed strong fluorescence and the transgene in the oocytes from a superovulating one were detected by PCR and sequencing. To investigate genomic variants by the transgene transposition, whole genomic DNA were analyzed by NGS. We found that preferred transposable integration (TA or TTAA) was identified in their genome. Even though multi-copies (i.e. fifteen) were confirmed, there was no significant difference in genome instabilities. In conclusion, we demonstrated that transgenic cattle using the DNA transposon system could be efficiently generated, and all those animals could be a valuable resource for agriculture and veterinary science.
Transgenesis is an important tool to understand gene function in mammals. Based on isolation of embryonic stem cells in rodents via germline transmission, transgenic mice have been accelerated in genetic models. Unlike mice with germ-line competent embryonic stem cells, development of transgenic livestock has been hampered to date. Early studies in transgenic livestock depended on microinjecting DNA into pronuclear stage embryos. After improving DNA delivery, several transgenic techniques such as virus- or sperm-mediated gene transfer and somatic cell nuclear transfer (SCNT) with transgenic somatic cells have been applied. Recently, SCNT has been heralded as a promising approach for generating transgenic livestock. Even though abnormalities derived from SCNT are reported, a few transgenic cattle via SCNT have been generated. However, there is still low efficiency due to insufficient reprogramming and high frequency of abnormalities in the SCNT approach. An alternative approach for producing transgenic livestock is the use of viral vectors. Among several viral vectors, lentivirus-mediated gene transfer has successfully been applied to transgenic cattle. Although viral gene delivery has advantages for efficient genome integration, viral infection may cause activation of proto-oncogene, resulting in potential of tumorigenesis1,2.
Recently, in addition to simple plasmid and viral gene delivery, DNA transposons including Piggybac (PB), Sleeping beauty (SB), Tol2 or Tn5 have been successfully used for transgenesis in several studies3,4,5,6. The basic principle of transposon is that transposase recognizes transposable elements sequences (TES), cut the inside DNA of TES and paste it into the other genome position. When TES moved into another region, they preferred some specific sequences like TA and TTAA for SB and PB, respectively7. Furthermore, when the transposase cuts and pastes the transgene, multi-copies integration into genome is possible (i.e. over 60 copies)8. Also, as integration of transposon has preference for low-risk chromosomal regions such as intronic sequences7, it could be safer than viral gene delivery. Due to stable integration with high expression by transposon DNA delivery, transposons are applied to several species as mentioned above. Although there have been several research publications regarding transgenesis in cattle using transposon9,10, live cattle has not been produced. Here, we generated transgenic cattle using two transposons (SB and PB), which deliver ubiquitous expression, conditional expression by rox-Dre recombinase, and tissue-specific expression. Additionally, those were analyzed by next-generation sequencing (NGS) for genome integration site, number of transgenes and genomic variants (Fig. 1).
Transgene expression in somatic cells, embryos and calf
Efficiency of transgene delivery into bovine fibroblasts was measured. Plasmid DNA (pcDNA3.1-GFP) and two transposons (SB-GFP and PB-GFP) were transfected; delivery efficiency of GFP was shown in Supplementary Figure 2. The expression ratio of GFP at 24 h, 48 h, 72 h, 96 h and 144 h after transfection without antibiotic selection in PB-GFP (12.8, 32.9, 41.7, 44.6 and 24.3%, respectively) was higher than in pcDNA3.1-GFP (1.4, 8.6, 18.7, 0.0 and 0.0%, respectively) and SB-GFP.
SB-YFP and SB100X were microinjected into 191 fertilized embryos. Twenty blastocysts were formed and one of them expressed YFP without mosaicism. PB-rox-GFP-rox-RFP and transposase were microinjected into 560 fertilized embryos, and 93 blastocysts (11 GFP expression) were formed. After microinjecting PB-pβ-casein-hIL2-pCAG-GFP and transposase into 4033 fertilized embryos, 49 of 779 blastocysts expressed GFP. Selected blastocysts with ubiquitous expression were transferred into 17 recipients. A total of nine recipients were pregnant and nine transgenic calves were naturally delivered (Figs. 2, 3, 4; Supplementary Figure 4). One died due to respiratory distress with delayed delivery (Supplementary Figure 3), another was suffered from severe diarrhea, and died one month later (Table 1).
Integration of transgene confirmed by PCR (Figs. 2, 3, 4; Supplementary Figure 4) using genomic DNAs. Primary cells were isolated from all the transgenic calves and expressed GFPs. Number of fluorescence-positive cells was calculated and summarized (Table 1). After primary cells from SNU-PB-1 were transfected with mRNA of Dre recombinase, recombination reaction was confirmed by RFP expression and genomic PCR amplification (Fig. 3).
Light or strong green color (fluorescent response) in some organs (the hooves, nose, eyes, lips and tongues) were observed under normal lights in some transgenic cattle (Fig. 4 and Supplementary Figure 4). Among the organ, the strongest expression was founded in the eyes (Figs. 3 and 4; Supplementary Figure 4).
Copy number and integration site
To detect integration events of transgene, single-nucleotide variants (SNV), structural variation (SV), and copy number variations (CNV), whole genome sequence from three transgenic and wild type cattle blood samples were analyzed. On average, more than 60 giga base pairs (Gbp) per sample were produced (Table 2). Based on the sequencing quality metrics, we estimated about 16-fold coverage of whole genome of cattle with the quality passed and aligned paired-end reads. The average mapping rate to the cow reference genome (UMD3.1) was over 99.73% (Table 2).
For integration site and copy number, all the transgene sites were found by the Integrative Genomics Viewer (IGV) program (https://www.broadinstitute.org/igv/, Broad Institute) and confirmed manually by PCR with endogenous and exogenous specific primers (Supplementary Table 1). The YFP gene (SNU-SB-1) was integrated in chromosomes 4, 21 and 26. One transgene was integrated in intron between exons 1 and 2 at chromosome 4, locus designed for GNAI1 (Genbank assess NM_174324.2). To evaluate transcripts of GNAI1, RT-PCR was performed and its expression was not shown to be affected (Supplementary Figure 5).
The rox-GFP-rox-RFP gene (SNU-PB-1) was integrated in chromosomes 1, 2, 3, 4, 5, 6 (two sites), 7, 14, 17, 22, 25, GJ0599801.1, 26 and X. The pβ-casein-hIL2-pCAG-GFP gene was integrated in chromosomes 3 (two sites), 5 (three sites), 6, 7, 9, 10, 11 (two sites), 15, 18 and X (two sites). All the integrated sites including exact position and 5′-, 3′- flanked genes were summarized Table 3 and illustrated in Fig. 5.
Identification of transgenic variants compared to wildtype
In transgenic and wild type, overall, about 8.1 million SNVs and 1.0 million insertions and deletions (Indels) were identified (Table 4). Using this data, we investigated the transgenic-specific SNV. The number of transgenic-specific SNV, as “high impact” by SnpEff software (http://snpeff.sourceforge.net/, version 4.2) were 315 (Table 5; Supplementary Table 2). Furthermore, we also identified the transgenic-specific SV and CNV were 65 and 38, respectively (Supplementary Tables 3 and 4). The SV event was consisted of 49 deletions, 2 duplications, 8 inversions and 6 translocations. In the case of CNVs, there were 33 gains and 5 losses. In our analysis, SNP density of chromosome 12 and 23 in all samples were very high compared to other chromosomes (Fig. 6).
Telomere length analysis
Disruption of GFP and Knock-in
Transgene integration positions in the transgenic cattle were considered at the safe target region because they have grown up without health issues to date. Thus, we transfected guide RNA endonuclease for the GFP as a previous study12 and donor knock-in DNAs together into the primary cells from SNU-PB-2. After transfection, during three days, the cells were isolated with antibiotic selection, puromycin. On 10 days post-transfection, we found the several colonies without GFP expression only in GFP guide RNA/Cas9 + Donor DNAs group. In the other groups (control, GFP guide RNA/Cas9 and Only Donor group; Supplementary Figure 6), all of the cells were dead.
Transgene detection in Germ cells
In one cattle (SNU-SB-1, female), we performed superovulation, artificial insemination and embryo collection. We failed to collect viable fertilized embryos. Nine unfertilized oocytes were collected and the transgene were detected by genomic PCR. When collecting the embryos in uterus, some tissues from uterine epithelium were isolated and cultured. All uterine epithelial cells expressed YFP protein (Supplementary Figure 7).
Transgenic cattle in agriculture fields have been of interest due to basic embryology and genetic models. Although several trials to generate transgenic cattle have been carried out, the number of live transgenic cattle and germ line transmission of transgene into NGS have been hampered to date. While live transgenic cattle and germ line transmission using lentiviral-mediated transgenesis has been applied successfully13, the issue that viral gene delivery may cause oncogenic activation remains. As an alternative approach, nuclear transfer is considered. It has several disadvantages such as very low efficiency, abnormalities and sudden deaths. To overcome those issues on transgenic cattle, here, we reported efficient production of transgenic cattle using the transposon system. Furthermore, transgene integration and genome variants were analyzed by NGS for genomic stability of transgenic cattle.
DNA transposon is well established to generate target gene overexpression in rodents, particularly gene function via mutagenesis14 or cancer study8. Additionally, in human cells, SB or PB delivery have been used for gene therapy15,16,17. Unlike mice, development of gene function via transgene delivery in mutant live offspring in livestock have been slow to garner to attention due to low efficiency or severe mosaicism of microinjection and nuclear transfer18 at greater costs. Recently, SB transposon has been successfully applied to generate transgenic pigs and its germline transmission19. However, progress of transgenic cattle has relatively been very slow due to long-term gestational periods (around 280 days) and single calf pregnancy even though several transgenic cattle using nuclear transfer has been born with low efficiency. Here, we introduced two DNA transposons (SB and PB) for generating transgenic cattle. While two transposons were microinjected into in vitro fertilized bovine embryos, the efficiency of transfections was tested to see which transposon could be better. In the test, we found that PB transposon was much higher efficiency than SB; thus, most microinjection into fertilized embryos was carried out by PB transposon.
We produced three kinds of transgenic cattle. First, a transgenic cattle expressing transgene (YFP) under the ubiquitous promoter was born via a SB transposon method (Fig. 2). Second, a transgenic cattle with conditional gene expression by Dre recombinase was born via a PB transposon. In this cattle, ordinarily GFP transgene was expressed in the whole body. Furthermore, after Dre recombinase treatment, GFP gene excision occurred and sequentially RFP gene was expressed (Fig. 3). Lastly, several transgenic cattle with tissue specific promoter (beta-casein)-human gene (IL2) with reporter gene (GFP) via PB transposon were born (Fig. 4). During this study, we did not find either any miscarriage or stillbirths in recipient cow after diagnosing pregnancy or health problems in growing cattle.
Moreover, we wondered that the transgene expression was in germ cells because the first transgenic cattle (SNU-SB-1) have only reached puberty. After superovulation, artificial insemination, and embryo collection, we did not find viable fertilized embryos. Nine unfertilized oocytes were collected, and transgene expression in these oocytes was detected and confirmed by sequencing (Supplementary Figure 6). Additionally, the uterine epithelial cells, which were collected by uterine flushing, expressed 100% the YFP protein (Supplementary Figure 6). Because the second transgenic cattle will be in puberty and fertile, we are planning to produce the calf between the first (female) and second (male) transgenic cattle by natural breeding. During the submission and review, natural breeding was carried out and the transgenic cattle (SNU-SB-1: female) was pregnant. On coming end of June at this year, the calf will be delivered and analyzed by PCR and fluorescence expression for germline transmission. Furthermore, the semen from the second transgenic cattle (SNU-PB-1: male) were collected, frozen and used for in vitro fertilization. As expected, the GFP expressing blastocysts were observed. In the future, when the recipients are ready, the blastocysts with GFP expression will be transferred for producing a female and a male calf. The calves will be bred for producing a homozygous offspring.
One of the most important issues in transgenic animals is integration-number, -site and expression of the transgene because it may affect the lethality or gene silencing20,21. Theoretically, when target gene by transposons (jumping gene) move into another site, it has moved into its preference sequences (TA for SB and TTAA for PB)7. In this study, to confirm transposon preference and genome instability (copy number variation, structure variation and telomere lengths), the genome from blood of these transgenic cattle was analyzed by NGS. As expected, the genes by SB and PB were integrated into TA or TTAA position, respectively (Table 2). While a few transgene copies were inserted intron of coding gene, most transgene were integrated in non-coding region. Even though transgene were integrated in intron of coding gene (exons), its transcriptional expression was not changed (Supplementary Figure 5).
We assume that these transposon integrations may not affect the normality of transgenic cattle in our study even though high number of transgene integration (over than 10 copies) were found. Thus, we believed that the transgene integration sites could be used as the target region (safe harbor regions, such as mROSA26 and hAAVS1) for another useful protein expression using genome-editing technologies. For this approach, RNA-guided endonuclease for GFP was applied and all the GFP regions were disrupted. Furthermore, recombination knock-in cassette using donor DNAs were integrated in GFP target site. In future, we will add a gene of interest into the target locus by Cre-recombinase-based exchange and used as the donor cells for producing cloned cattle.
In the previous reports on transgenic animals or plants generated by transposons and plasmids, they did the integration or expression based on conventional PCR approaches5,22,23. Its disadvantage is to find out only amplified products with primer conditions, indicating that not all the transgenes can be identified. Transgene insertion site is not typically characterized because traditional methods for transgene insertion site discovery are either expensive and/or offer low resolution (DNA FISH) or are complicated by the multi-copy nature of the inserted sequences (inverse PCR). However, whole genome sequencing enables us to find out all the integration details with high specificity at single-nucleotide resolution and also provided information on the chromosomal location and transgene copy number24,25. Indeed, in our study NGS analysis provided transgene integration number and position with single nucleotide resolution. Furthermore, we hypothesized that as the transposon moved initial site into another position, the genome variants such as SNP, SV, CNV and telomere lengths might be affected in these transgenic cattle. When we analyzed the genome variants in 5′- and 3′-region (1 kbps) of the transgene integration positions, there were no significant genomic variants. On chromosomes 12 and 23, on the other hand, we found high variable regions as previously reported26. The result indicated that it was breed-specific characteristics, not transgenic cattle.
Using NGS analysis, relative telomere lengths, which is co-related to age of individual were measured on the transgenic cattle to know if transposition of transgenes might affect the telomere length or not. Although there were no considerable changes in telomere length, only one transgenic cattle showed shorter size telomere compared to other individuals. To figure out whether senescence changes could be identified for the transgenic cattle, its development to adult will be monitored.
In conclusion, the data demonstrated that, for the first time, we generated several transgenic cattle efficiently using the DNA transposon delivery system and identified integrated number, integration position, genomic variants and telomere lengths by the NGS approach. They have grown up to date without any health issue and breeding. We suggest that those transgenic cattle could be valuable resources for bio-agricultural science.
Materials and Methods
DNA preparation for SB containing yellow fluorescence protein (YFP) and SB100X transposase were reported previously. The transposase plasmids for SB (pCMV(CAT)T7-SB100X) and PB (pCy43) were purchased from Addgene (http://www.addgene.org, Plasmid#34879) and provided by Sanger Institute (Hinxton, UK). Rox-GFP-polyA-rox and RFP were amplified by gateway PCR cloning (MultiSite Gateway® Pro Plus, Invitrogen, 12537100, Life Technologies, Carlsbad, CA, USA) and inserted into final expression vector, PB-CAG (http://www.addgene.org/, #20960). Beta-Casein promoter and hIL2 cDNAs were amplified by PCR and inserted into PB-GFP by Infusion Cloning (In fusion HD cloning kit, Clontech, 639644, California, US). All the DNA vectors used in this study were illustrated in Supplementary Figure 1.
In vitro maturation, fertilization and culture of bovine immature oocytes
Oocyte collection and in vitro maturation (IVM)
Ovaries were collected from a local abattoir into saline at 35 °C and transported to the laboratory within 2 h. Cumulus-oocyte complexes (COCs) from follicles 2–8 mm in diameter were aspirated using an 18 gauge needle attached to a 10 ml disposable syringe. COCs with evenly-granulated cytoplasm and enclosed by more than three layers of compact cumulus cells were selected and washed three times in HEPES-buffered tissue culture medium-199 (TCM-199; Invitrogen, Carlsbad, CA, USA), supplemented with 10% FBS, 2 mM NaHCO3 (Sigma–Aldrich Corp., St. Louis, MO, USA), and 1% penicillin–streptomycin (v/v). For IVM, COCs were cultured in four-well dishes (30–40 oocytes per well; Falcon, Becton-Dickinson Ltd., Plymouth, UK) for 22 h in 450 μL TCM-199 supplemented with 10% FBS, 0.005 AU/ml FSH (Antrin, Teikoku, Japan), 100 μM Cysteamine (Sigma-Aldrich), and 1 μg/ml 17β-estradiol (Sigma–Aldrich) at 39 °C in a humidified atmosphere of 5% CO2.
Sperm preparation, in vitro fertilization (IVF) and in vitro culture of embryos (IVC)
Motile spermatozoa were purified and selected using the Percoll gradient method27. Briefly, spermatozoa were selected from the thawed semen straws by centrifugation on a Percoll discontinuous gradient (45–90%) for 15 min at 1500 rpm. The 45% Percoll solution was prepared with 1 mL of 90% Percoll (Nutricell, Campinas, SP, Brazil) and 1 mL of capacitation-TALP (Nutricell). The sperm pellet was washed twice with capacitation-TALP by centrifugation at 1500 rpm for 5 min. The active motile spermatozoa from the pellet were used for insemination of matured oocyte (At 24 h of IVM). Oocytes were inseminated (day 0) with 1–2 × 106 spermatozoa/mL for 18 h in 30 μL microdrops of IVF-TALP medium (Nutricell) overlaid with mineral oil at 39 °C in a humidified atmosphere of 5% CO2. Presumptive zygotes were denuded and cultured in two-step chemically defined culture medium overlaid with mineral oil (Sigma–Aldrich)28. All incubations were done at 39 °C in an atmosphere of 5% O2, 5% CO2 and 90% N2. Cleavage rates were recorded on Day 2 and embryonic development was monitored according to the stages of the International Embryo Transfer Society (IETS).
Transposon DNAs were microinjected into the cytoplasm by microinjector machine (Femtojet®, Eppendorf, Germany) after removing the cumulus cells of fertilized oocytes. Amount of injected DNAs was 100 ng/mL (1:1 ratio of transposon and transpoase). After 7 days, GFP expressing pre-implantational stage embryos were chosen and transferred into the surrogate cow.
Embryo transfer and pregnancy diagnosis
All experiments with live animals were performed in accordance with the relevant laws and institutional guidelines of Seoul National University and Seoul Milk Coop, and institutional committees of Seoul Milk Coop have approved the experiments. A GFP-expressing blastocyst in PBS supplemented with 20% FBS was transferred to the uterine horn of each recipient cow by a transcervical method on Day 7 (estrus = Day 0 = day of fusion) by non-surgical approach. In order to determine embryo survival and pregnancy, cows were examined by rectal palpation and ultrasonography on Day 45 post estrus. Pregnant cows were monitored by rectal palpation and ultrasonography at regular intervals thereafter.
Genomic DNA sample preparation
Genomic DNA was extracted from blood or primary cells with DNA extraction kit, following the manufacturer’s protocol. Genomic DNA was analyzed by Qubit fluorometer dsDNA assay Kit (Invitrogen, CA) as well as Infinite F200 Pro NanoQuant (TECAN, Männedorf) to verify the quality (O.D. 260/280 ratio is 1.8–2.0 and O.D. 260/230 ratio greater than 1.6) and quantity (1 ug for library construction).
Library construction and sequencing
One μg of genomic DNA for a 350 bp insert size was fragmented using a Covaris S2 Ultrasonicator. DNA sequencing libraries were constructed using the TruSeq DNA PCR-Free Sample Preparation Kit from Illumina (San Diego, CA). They were prepared according to the manufacturer protocol by eliminating PCR amplification steps to removes typical PCR-induced bias and streamlines. The final library size and quality were evaluated electrophoretically with an Agilent High Sensitivity DNA kit (Agilent Technologies, Santa Clara).
Sequencing was done on Illumina HiSeq 2500 using the TruSeq Paired End Cluster Kit v3 and the TruSeq SBS Kit v3-HS (FC-401-3001), generating 2 × 100 bp reads at TheragenEtex Bio Institute, Korea. Image analyses were performed using the HiSeq control software (Version 2.2.58). Raw data was processed and base calling performed using the standard Illumina pipeline (CASAVA version 1.8.2 and RTA version 1.18.64).
Sequencing data quality control
Over about four hundred million pass-filter reads were generated per each sample. Quality control analysis of the sequencing reads was conducted using the FastQC software29 and In-house script. During data analysis, the raw reads obtained from sequencing were trimmed for low quality ends with the Sickle software (version 1.33)30, using a Phred quality threshold of 20. All reads shorter than 50 bp after the trimming were discarded.
Read mapping and analysis
All of the filtered sequencing reads were then mapped to the reference Bos Taurus genome sequence (UMD 3.1, http://asia.ensembl.org/Bos_taurus/Info/Annotation) and the transgene sequence at once using Burrows-Wheeler Aligner (BWA, version 0.7.5a)31. To avoid overweighting of some genomic positions caused by inhomogenoerous PCR amplifications, we removed duplicated reads with the MarkDuplicate subroutine (Picard, version 1.128).
Multi-sample calling of single-nucleotide variants (SNV) and indels was performed on processed, sample-level BAM files with the GATK Unified Genotyper32. After multi-sample calling, variants were first filtered for confident calls using a quality score cutoff of 30. The SnpEff software33 together with the UMD 3.1/bosTau Ensembl annotation was used to predict the functional effects of the variants detected.
Identification of copy number variations (CNVs) and structural variations (SVs)
To identify copy number changes in cattle, we used the Control-FREEC software34. FREEC calculates ploidy for the regions of interest as the copy number value in each 50 kb window in the region of interest after GC content read count normalization, given a normal autosomal ploidy of 2. SVs (deletions, tandem duplications, inversions and translocations) called at nucleotide resolution with split-read support using Delly software35 that uses diploid genotype likelihoods and the best likelihood determines the final genotype. We use the 3 criteria of the precision filter as follow. First, we use the PRECISE/IMPECISE creteria. PRECISE are structural variant calls at nucleotide resolution with split-read support. we select only PRECEISE structural variant call. Second, we select >=20 the paired-end support of the structural variant. Third, the mean mapping quality (MAQ) has to be >=60.
To compare calls between transgenic and wild type, we used bedtools software36 intersect requiring 80% reciprocal overlap (-r -f 50). If this condition is satisfied more than 2 transgenic, this SV consider the same things. And then this compared to wild type for identifying transgenic-specific SVs. Transgenic-specific CNV was called in the same way.
Transgene insertion site detection
With mapping data BAM (aligned format) generated by BWA, we analyzed the insertion site of transgene. BWA meant that some nucleotides at either extreme of the read could be omitted (that is, “soft trimmed” or “soft clipped”) as determined by a Smith-Waterman like scoring scheme. By checking the mapped pattern of soft-clipped sequence, we inferred the insertion candidate sites. In parallel, we also used Delly to detect whether genome structural variation can be a candidate for the insertion site of transgene. Lastly, the candidate sites were also manually inspected using the IGV software.
Calculation telomere length using whole genome sequence
Whole genome data are mined for reads that are rich in telomere sequence, and relative length is determined. Using TelSeq11, we examined the frequency of reads from transgenic and control with different number of copies of TTAGGG.
PCR and RT-PCR
To confirm expression of mRNA or DNA integration, PCR and RT-PCR were carried out. Genomic DNA was extracted from blood or cells using DNA extraction kit (DNeasy Blood&Tissue kit 69506, Qiagen, Limburg, Netherlands). Total RNAs were extracted using an RNA extraction kit (Easy spin total RNA extraction kit, Cat no. 17221, iNtRON, Seongnam-si, Korea). One ug total RNAs were used for synthesizing cDNA using a cDNA synthesis kit (RNA to cDNA EcoDry™ Premix Kit, PT5153-2, Clontech, California, US). Amplification of the target DNA using specific PCR primers was performed by PCR machine (Eppendorf Vapo Protect Mastercycler, Eppendorf, Germany).
Disruption of GFP and Knock-In
In a transgenic cattle, GFP gene was disrupted by RNA-guided endonuclease (CRISPR/Cas9) as previously reported12. As briefly, primary cells from a transgenic cattle (SNU-PB-2) were transfected with plasmid DNAs (Cas9 with CMV promoter, single guide RNA for GFP with U6 promoter (Toolgen, Seoul, Republic of Korea), donor DNAs for Knock-In; Supplementary Figure 6) using Nucleofactor technology (Neon®, Invitrogen; program #16). After transfection, the fibroblasts were cultured with 4 ug/mL, Puromycin (GIBCO) for 3 days. After replacing the media with fresh culture media, the cell were cultured for an additional 10 days to find out out-growing colonies.
How to cite this article: Yum, S.-Y. et al. Efficient generation of transgenic cattle using the DNA transposon and their analysis by next-generation sequencing. Sci. Rep. 6, 27185; doi: 10.1038/srep27185 (2016).
Hacein-Bey-Abina, S. et al. LMO2-associated clonal T cell proliferation in two patients after gene therapy for SCID-X1. Science 302, 415–419, 10.1126/science.1088547 (2003).
Bushman, F. et al. Genome-wide analysis of retroviral DNA integration. Nat. Rev. Microbiol. 3, 848–858, 10.1038/nrmicro1263 (2005).
Huang, X. et al. Gene transfer efficiency and genome-wide integration profiling of Sleeping Beauty, Tol2, and piggyBac transposons in human primary T cells. Mol. Ther. 18, 1803–1813, 10.1038/mt.2010.141 (2010).
Suganuma, R. et al. Tn5 transposase-mediated mouse transgenesis. Biol. Reprod. 73, 1157–1163, 10.1095/biolreprod.105.044669 (2005).
Schulte, C., Theilenberg, E., Muller-Borg, M., Gempe, T. & Beye, M. Highly efficient integration and expression of piggyBac-derived cassettes in the honeybee (Apis mellifera). Proc. Natl. Acad. Sci. USA 111, 9003–9008, 10.1073/pnas.1402341111 (2014).
Ding, S. et al. Efficient transposition of the piggyBac (PB) transposon in mammalian cells and mice. Cell 122, 473–483, 10.1016/j.cell.2005.07.013 (2005).
Munoz-Lopez, M. & Garcia-Perez, J. L. DNA transposons: nature and applications in genomics. Curr. Genomics 11, 115–128, 10.2174/138920210790886871 (2010).
Rad, R. et al. PiggyBac transposon mutagenesis: a tool for cancer gene discovery in mice. Science 330, 1104–1107, 10.1126/science.1193004 (2010).
Hu, G. et al. A modified piggybac transposon system mediated by exogenous mRNA to perform gene delivery in bovine mammary epithelial cells. Biotechnol. Bioproc. E. 19, 350–362, 10.1007/s12257-013-0811-5 (2014).
Kim, S. et al. Production of transgenic bovine cloned embryos using piggybac transposition. J. Vet. Med. Sci. 73, 1453–1457 (2011).
Ding, Z. et al. Estimating telomere length from whole genome sequence data. Nucleic Acids Res. 42, e75, 10.1093/nar/gku181 (2014).
Choi, W. et al. Disruption of exogenous eGFP gene using RNA-guided endonuclease in bovine transgenic somatic cells. Zygote 1–8, 10.1017/S096719941400063X (2014).
Reichenbach, M. et al. Germ-line transmission of lentiviral PGK-EGFP integrants in transgenic cattle: new perspectives for experimental embryology. Transgenic. Res. 19, 549–556, 10.1007/s11248-009-9333-5 (2010).
Albieri, I. et al. A DNA transposon-based approach to functional screening in neural stem cells. J. Biotechnol. 150, 11–21, 10.1016/j.jbiotec.2010.07.027 (2010).
Wilson, M. H., Coates, C. J. & George, A. L., Jr. PiggyBac transposon-mediated gene transfer in human cells. Mol. Ther. 15, 139–145, 10.1038/sj.mt.6300028 (2007).
Yant, S. R. et al. Somatic integration and long-term transgene expression in normal and haemophilic mice using a DNA transposon system. Nat. Genet. 25, 35–41, 10.1038/75568 (2000).
Di Matteo, M. et al. Hyperactive piggyBac transposons for sustained and robust liver-targeted gene therapy. Mol. Ther. 22, 1614–1624, 10.1038/mt.2014.131 (2014).
Niemann, H. & Kues, W. A. Transgenic livestock: premises and promises. Anim. Reprod. Sci. 60-61, 277–293 (2000).
Garrels, W. et al. Germline transgenic pigs by Sleeping Beauty transposition in porcine zygotes and targeted integration in the pig genome. PloS one 6, e23573, 10.1371/journal.pone.0023573 (2011).
Araki, K., Araki, M., Miyazaki, J. & Vassalli, P. Site-specific recombination of a transgene in fertilized eggs by transient expression of Cre recombinase. Proc. Natl. Acad. Sci. USA 92, 160–164 (1995).
Haruyama, N., Cho, A. & Kulkarni, A. B. Overview: engineering transgenic constructs and mice. Curr. Protoc. Cell Biol. Chapter 19, Unit 19, 10, 10.1002/0471143030.cb1910s42 (2009).
Woltjen, K. et al. piggyBac transposition reprograms fibroblasts to induced pluripotent stem cells. Nature 458, 766–770, 10.1038/nature07863 (2009).
Bubner, B. & Baldwin, I. T. Use of real-time PCR for determining copy number and zygosity in transgenic plants. Plant cell reports 23, 263–271, 10.1007/s00299-004-0859-y (2004).
Zhang, R. et al. Molecular characterization of transgene integration by next-generation sequencing in transgenic cattle. PloS one 7, e50348, 10.1371/journal.pone.0050348 (2012).
Srivastava, A. et al. Discovery of transgene insertion sites by high throughput sequencing of mate pair libraries. BMC genomics 15, 367, 10.1186/1471-2164-15-367 (2014).
Lee, T. et al. Genetic variants and signatures of selective sweep of Hanwoo population (Korean native cattle). BMB. Rep. 46, 346–351 (2013).
Machado, G. M. et al. Effect of Percoll volume, duration and force of centrifugation, on in vitro production and sex ratio of bovine embryos. Theriogenology 71, 1289–1297, 10.1016/j.theriogenology.2009.01.002 (2009).
Lim, K. T. et al. Improved in vitro bovine embryo development and increased efficiency in producing viable calves using defined media. Theriogenology 67, 293–302, 10.1016/j.theriogenology.2006.07.011 (2007).
Andrews, S. FastQC: a quality control tool for high throughput sequence data. Available online at: http://www.bioinformatics.babraham.ac.uk/projects/fastqc. (2010 (Date of access:28/03/2016).
Joshi, N. & Fass, J. Sickle: A sliding-window, adaptive, quality-based trimming tool for FastQ files (Version 1.33) [Software]. Available online at https://github.com/najoshi/sickle.https://github.com/najoshi/sickle (2011(Date of access:28/03/2016).
Li, H. & Durbin, R. Fast and accurate long-read alignment with Burrows-Wheeler transform. Bioinformatics 26, 589–595 (2010).
DePristo, M. A. et al. A framework for variation discovery and genotyping using next-generation DNA sequencing data. Nat. Genet. 43, 491–498, 10.1038/ng.806 (2011).
Cingolani, P. et al. A program for annotating and predicting the effects of single nucleotide polymorphisms, SnpEff: SNPs in the genome of Drosophila melanogaster strain w1118; iso-2; iso-3. Fly 6, 80–92, 10.4161/fly.19695 (2012).
Boeva, V. et al. Control-FREEC: a tool for assessing copy number and allelic content using next-generation sequencing data. Bioinformatics 28, 423–425, 10.1093/bioinformatics/btr670 (2012).
Rausch, T. et al. DELLY: structural variant discovery by integrated paired-end and split-read analysis. Bioinformatics 28, i333–i339, 10.1093/bioinformatics/bts378 (2012).
Quinlan, A. R. & Hall, I. M. BEDTools: a flexible suite of utilities for comparing genomic features. Bioinformatics 26, 841–842, 10.1093/bioinformatics/btq033 (2010).
This study was financially supported by the Research Institute of Veterinary Science, IPET (#109023-05-5-CG000, 111078-03-3-CG000), MKE (the Industrial Strategic Technology Development Program, 10040231) and the BK21 PLUS Program for Creative Veterinary Science Research.
The authors declare no competing financial interests.
About this article
Cite this article
Yum, SY., Lee, SJ., Kim, HM. et al. Efficient generation of transgenic cattle using the DNA transposon and their analysis by next-generation sequencing. Sci Rep 6, 27185 (2016). https://doi.org/10.1038/srep27185
Transgenic F2 bovine embryos show stable germline transmission and maintenance of transgene expression through two generations
Biology of Reproduction (2020)
In Vivo Piggybac-Based Gene Delivery towards Murine Pancreatic Parenchyma Confers Sustained Expression of Gene of Interest
International Journal of Molecular Sciences (2019)
Generation of Venus fluorochrome expressing transgenic handmade cloned buffalo embryos using Sleeping Beauty transposon
Tissue and Cell (2018)
International Journal of Veterinary Science and Medicine (2018)
Long-term health and germline transmission in transgenic cattle following transposon-mediated gene transfer
BMC Genomics (2018)