Corrigendum: Length Distribution of Ancestral Tracks under a General Admixture Model and Its Applications in Population History Inference

Scientific Reports 6: Article number: 20048; published online: 28 January 2016; updated: 23 May 2016. In the original version of this Article, Affiliation 1 was omitted for Zhiming Ma. This error has now been corrected in the PDF and HTML versions of the Article.

distribution was provided. However, he failed to explicitly deduce the theoretical distribution of ancestral tracks under a general situation 9 .
Here we proposed a general model that can cover all the scenarios of an admixed population with an arbitrary number of ancestral populations and (or) arbitrary number of admixture events. In this study, we first described the general admixture model and deduced a general formula for the theoretical distribution of ancestral tracks with some reasonable approximations. With this distribution, we can use maximum likelihood estimation (MLE) to estimate model parameters, and the Akaike information criterion (AIC) 11 or the likelihood ratio test (LRT) 12 to select an optimal model from candidates for the given data. We next demonstrated that the three aforementioned admixture models, namely HI, GA and CGF models in previous studies 8 are all special cases under our general model. Then, under these three models, we developed a method called AdmixInfer to estimate the admixture proportion and admixture time, and simultaneously selected the optimal model according to the principles of AIC. We further conducted extensive simulation studies to demonstrate the accuracy of the theoretical distribution of ancestral tracks under the general model, and the effectiveness of our method to estimate the parameters and select an optimal model. Finally, we applied our method to African Americans and Mexicans from the HapMap phase III dataset 13 , and several South Asian populations from the Human Genome Diversity Project (HGDP) 14 dataset.

Methods
Length distribution of ancestral tracks under a general model. In our general model, population admixture is accomplished by receiving gene flow(s) from ancestral populations either continuously or discontinuously. We model this process generation by generation, in which, if the admixed population does not receive further gene flow(s) in a particular generation, we set the strength of gene flow(s) to 0. Specifically, given an admixed population started T generations ago, with K ancestral populations, let ( ) m t i denote the ancestry proportion from the ith ancestral population that entered at t generation. Here the time of the admixture in generations are denoted to increase over time, with T being the present time (see Fig. 1 as the survival proportion of the ancestral tracks at generation T from the ith ancestral population that entered at generation t, then Generally, we assume that the ancestral populations are homogeneous, and recombination among segments from the same ancestry does change the length of the tracks, but it is not "observable" to us, thus the length of tracks seems unchanged, and only these recombination events among different ancestries produce "observable" changes (see Supplementary Fig. S1 online). Here we explicitly take these "unobservable" changes into consideration and adjust the recombination rate accordingly as following. Defining the recombination among tracks from different ancestral populations as effective recombination, let ( ) u t i be the effective recombination rate for tracks from the ith ancestral population that entered at generation t, then If the end is ignored, a chromosome from the ith ancestral population that entered at generation t is expected to be split into ( ) u t i pieces per unit length (unit in Morgan). Then the number of ancestral tracks from ith ancestral population that entered at generation t to the admixed population is proportional to ( ) ( ) u t s t i i . Let X i be the length of ancestral tracks of the ith ancestral population at generation T, Due to the limited accuracy in local ancestry inference, only those relatively long tracks are reliable 9,10 . Therefore, we are also interested in the conditional length distribution of ancestral tracks longer than a specific threshold C, ; With the length distribution of ancestral tracks (Eq. (5)), we can easily deduce the expectation and variance of X i as However, with the increase in the number of parameters, it is complex and time-consuming to find the optimal solution and too many parameters can lead to over-fitting. In a real situation, we can propose several candidate models with prior knowledge in which the number of parameters is dramatically reduced, thus the problem is simplified to estimating parameters for each candidate model and selecting the most suitable one. If we have obtained the parameters of the candidate models, we can compare the models in a pair-wise fashion by using either AIC or LRT. Here, the two models are regarded to be 'nested' if one of the models constitutes a special case of the other 15 . When the two competing models are nested, we use LRT to select the model; otherwise we use AIC.
The distribution of ancestral tracks under HI, GA, and CGF Models. In this subsection, we demonstrate that, with the length distribution of the general model, we can easily deduce the length distributions of ancestral tracks under three typical models aforementioned in previous studies 8  Easily we can obtain the distribution of the ancestral tracks of these three models from Equation (5). Detailed calculation is in Supplementary Text S1 online.
For simplicity, we define the ancestral population with the minor ancestry contribution as population 1, and the corresponding proportion is m. For HI model (see Supplementary Fig. S2 online), the ancestry proportions from population 1 and population 2 at generation t are Then the length distribution of ancestral tracks from population 1 is We can also get the expectation and variance of the length of ancestral tracks from Equation (7) and Equation Substituting m with 1−m in Equations (9), (10) and (11), we can obtain the length distribution, expectation, and variance of ancestral tracks from population 2, respectively. These two distributions are identical to the ones in previous studies 7,9 . For GA model (see Supplementary Fig. S2 online), the ancestry proportions from population 1 and population 2 at generation t are Then the length distribution of ancestral tracks from population 1 is . The expectation and variance of the length of ancestral tracks are Substituting m with 1−m in Equations (12), (13), and (14), we can get the length distribution, expectation and variance of ancestral tracks from population 2, respectively.
For CGF model (see Supplementary Fig. S2 online), the ancestral population that contributes only one pulse of gene flow is treated as a gene flow recipient and the one that contributes continuously as gene flow donor. Here, we divide the CGF model into two sub-models. If population 1 is a gene flow recipient, we denote it as CGFR model; otherwise we denote it as CGFD model.
In the case of CGFR model, the ancestry proportions from population 1 and population 2 at t generation are Then the length distributions of ancestral tracks from the two ancestral populations are The expectations and variances of the length of ancestral tracks are In the case of CGFD model, we just replace m with 1−m in Equation (15) and (16), and obtain the length distribution of ancestral tracks from population 2 and population 1, respectively. Parameter estimation and model selection under HI, GA, and CGF models. As discussed above, there are only two parameters m and T in HI, GA and CGF models. As for m, with the inferred ancestral tracks in an admixed population, we divide the total length of tracks from population 1 by the total length of tracks, and obtain an estimator m of the admixture proportion. Interestingly, from the expectation of the ancestral tracks from two ancestral populations in HI, GA and CGF models, we find that the expectation ratio between population 1 and population 2 relies only on m, thus we provide an alternative way to obtain the estimator m, Generally, if there are only two ancestral populations, Equation (17) always holds whatever the admixture model is. The proof is in Supplementary Text S1 online.
As for admixture time T, the estimation relies on the model assumed. Different models give different estimations of T so that we first need to assume a model. Here we regard HI, GA, CGFR and CGFD models as the candidate models, and use MLE to estimate the admixture time T and AIC to select the optimal model as following: First, by utilizing the inferred ancestral tracks, we calculate the admixture proportion and determine population 1; secondly, with the estimator m, maximizing the likelihood under model assumption HI, GA, CGFR, and CGFD, we obtain the maximum likelihoods L max (HI), L max (GA), L max (CGFR) and L max (CGFD) and corresponding optimal times T . Because each pair of these models is not nested, thus here we use AIC to select the optimal model. The value of AIC can be calculated by the equation where k is the number of parameters and L max is the maximized value of the likelihood function. The number of parameter of these models are the same, thus at the end of the comparison, we find that the problem is equivalent to finding the model with the highest likelihood. Thus, the model with the highest likelihood is chosen as the optimal model, and the corresponding parameters as the final results. These routines are implemented in our AdmixInfer. We also apply the bootstrapping technique in AdmixInfer and give a bootstrapped supporting rate of the chosen model and the estimation and confidence interval (CI) of the admixture time (Details in Supplementary Text S1 online). Simulation 1A was to simulate one pulse admixture with three ancestral populations: admixture started 50 generations ago with proportions 10%, 30% and 60%, respectively. Simulation 1B was to simulate discrete multiple-waves admixture with three ancestral populations: the admixture started 50 generations ago with initial proportions 10%, 40% and 50%, respectively, and population 1 contributed extra 10% ancestries each 10 generations later. Simulation 1C was to simulate continuous multiple-waves admixture with three ancestral populations: the admixture started 50 generations ago with initial proportions 10%, 30% and 60%, respectively; population 1 contributed an extra 0.2% ancestries for each generation afterwards. And simulation 1D was to simulate multiple-waves admixture with four ancestral populations that arrived at different times: populations 1 and 2 firstly admixed 50 generations ago with proportions 40% and 60%, population 3 entered 40 generations ago with proportion 20%, and population 4 entered 30 generations ago with proportion 10%. The simulations were repeated 5 times, and the ancestral tracks in the admixed population were recorded and the length distribution was compared to the theoretical distribution. Detailed parameters for the simulations were provided in Supplementary Data S1 online.

General settings of simulation studies.
Evaluate the performance of AdmixInfer. We focused on evaluating the performance of AdmixInfer under three typical models; i.e. HI, GA and CGF. Admixture proportions varied from 10% to 50% in steps of 10% for the admixture models (HI, GA, CGFR and CGFD). We set the admixture time as 5, 10, 20, 30, …, 200 generations. The ancestral tracks in admixed populations were also recorded as previous simulations. Each simulation here was repeated 10 times and, in total, 4,200 simulations were carried out under HI, GA and CGF models.
AdmixInfer was applied to the simulated data with the default settings; the results were recorded and summarized.
In real situations, we could only accurately infer the ancestral tracks longer than a specific threshold due to methods' limitations in local ancestry inferences. To make our method more feasible to real cases, we also evaluated the robustness of our method under different thresholds ranging from 0 centi-Morgan (cM) to 2 cM in step of 0.1 cM, with the dataset simulated in previous evaluations.
We also evaluated the performance of AdmixInfer with different sample sizes. We simulated populations starting with the admixture of 50 and 100 generations ago under HI, GA, and CGF models, with admixture proportions 30%:70%. At the end of the simulation, 10, 20, 50, 100, 200, and 500 "individuals" were sampled, corresponding to 1, 2, 5, 10, 20, and 50 human samples. AdmixInfer was applied to the simulated dataset without discarding short tracks.
Finally, we tested the performance of our method with data simulated by real populations and inferred ancestral tracks. Simulations were carried out with real populations YRI and CEU as parental populations under different models (30% YRI ancestry and 70% CEU ancestry) with admixture time 10, 20, 50 and 100 generations. Here we simulated with the data of chromosome 1 and sampled 25 "individuals" at the end of the simulation and each simulation was repeated 10 times. Then the local ancestry of the simulated populations was inferred by HAPMIX 16 . With the derived ancestral tracks, AdmixInfer was used to select the optimal model and estimate generations accordingly with the tracks longer than 1 cM.
Apply to real datasets. We applied our method to some real datasets. First, the histories of African Americans and Mexicans are relatively clear, thus they can be used to test the performance of our method. The data of African Americans, Mexicans and reference populations CEU and YRI were obtained from HapMap project phase III 13 , and the reference populations that represented American Indian ancestry (Maya and Pima) were obtained from HGDP dataset. Although previous studies showed multi-ancestry of African Americans and Mexicans 7,17 , here we mainly focused on the two dominant ancestries. Then we also applied our method to several HGDP populations from South Asia 14 , which showed evidence of population admixture from previous studies 1, 3 . Haplotype phasing was performed by SHAPEIT 2 18 . Local ancestry was inferred by HAPMIX 16  prior knowledge, the generations set in HAPMIX inference were 10, 20 and 50 for African Americans, Mexicans and South Asian populations, respectively 1 . AdmixInfer was used to select the optimal model and admixture time accordingly with the tracks longer than 1 cM. We also performed bootstrapping 100 times to obtain confidence of model selection, and calculated the 95% confidence intervals of the generations inferred.
Data availability:. The source codes and tutorials of AdmixInfer and AdmixSim are available at: http:// www.picb.ac.cn/PGG/resource.php.

Results
Theoretical and simulated distributions of ancestral tracks match well. With the length distributions of ancestral tracks under the general model, we could easily sketch the curves of theoretical length distributions of ancestral tracks under a given model (see Fig. 2). By putting the theoretical and simulated length distributions of ancestral tracks together, we clearly observed that the theoretical and simulated distributions of ancestral tracks matched well, for all the situations simulated and all the replicates (see Fig. 2). It showed that the theoretical length distribution of ancestral tracks for the general model, which we deduced, was reasonable and accurate.

AdmixInfer performs well in parameters estimation and model selection.
With the extensively simulated data, we could systematically evaluate the performance of our method in parameters estimation and model selection. For the simulated admixed populations under HI model or CGFD model, our method could always distinguish the right model in all our simulations; for the CGFR model, our method could distinguish the right model with accuracy of 97.0%; and for GA model, our method could distinguish the right model with accuracy of 93.0% (see Table 1). Moreover, the specificity of our method was over 97% for all the situations simulated. The sensitivity of GA and CGFR models and the specificity of HI and CGFD models under different admixture proportions and different admixture times were shown in Supplementary Fig. S3 online. We found that the simulations in which our method could not distinguish the right ones were mostly observed in these simulations with very recent admixture times and small admixture proportions (see Supplementary Fig. S3 and Data S2-S6 online). We also found that almost all CGFR models were only wrongly distinguished as HI models, and GA models as CGFD models (see Supplementary Data S6 online). This is also reasonable, because CGFR model is close to HI model, so that CGFR model is more likely to be distinguished as HI model. The same reason applies to GA model being wrongly distinguished as CGFD model.
Note that there were only two parameters m and T for the three typical models. Our method also performed well in estimating parameters m and T for the three typical models. Regarding the admixture proportion m, estimations were very close to the pre-settings in simulations, and the small deviation was due to random drift in simulation with finite population sizes and only a subset of individuals being sampled at the end of the simulation. Time estimations for wrongly distinguished models were meaningless, and thus should be discarded. Results showed that our method can estimate admixture times with high accuracy (see Fig. 3, Supplementary Fig. S4-S7, and Data S2-S5). For HI and CGFD models, results showed high consistency with the time simulated, while a slight underestimation occurred for GA and CGFR models. For all these models that were simulated, the time estimated for a small proportion was less accurate than that for a larger proportion. We defined the relative errors between true admixture times and inferred admixture times as  We found that when the admixture proportion was 0.1, the relative errors of CGFR and CGFD were 6.43% and 5.89%, respectively. For other cases, the relative errors were all less than 4% (see Table 2). In conclusion, no matter for the model selection or parameters estimation, our method performed well.

Robustness for different thresholds for length of ancestral track.
To test the robustness of our method for different thresholds for length of ancestral track, we tested our method under different thresholds varying from 0 cM to 2 cM in steps of 0.1 cM. The results showed that our method was robust to thresholds, except GA model with a larger time (see Fig. 4). When a larger threshold is taken, less information is kept for ancient admixture events. Although it is better to keep all the information to estimate admixture times, we must balance the trade-off between information and accuracy, because the accuracy of local ancestry inference is not so good for short ancestral tracks due to method limitations. Take HI for an example, the probability p of ancestral tracks larger than a specific threshold C is  Small sample sizes also give good estimations. To test the performance of AdmixInfer with different sample sizes, we evaluated the models with 10, 20, 50, 100, 200, and 500 "individuals" (corresponding to 1, 2, 5, 10, 20, and 50 human samples). Results showed that AdmixInfer was insensitive to sample sizes. Even with only one human sample, it could distinguish the right model and estimate the admixture time with high accuracy (see Fig. 5). However, considering the accuracy of local ancestry, short tracks were usually discarded. The information kept for extremely small sample sizes might not be sufficient to give a clear picture of the history of a population. Therefore, relatively larger sample sizes were recommended.
Error analysis. When we use our method to infer the history of a real admixed population, there are two kinds of errors that may influence the accuracy of inference. The first kind of error is caused by the assumptions in deducing the length distribution of ancestral tracks. In the derivation, for simplicity, we ignored the end of the chromosome and the drift. For this kind of error, we have used the simulation data to demonstrate that the accuracy of the inference was neglectable (see Fig. 3 and Table 1). The second kind of error is caused by the local ancestry inference. In our study, local ancestral tracks are inferred by HAPMIX software. Here we used the simulation data with ancestry populations YRI and CEU to analyze the influence of this kind of error. For all the cases we simulated, only HI model with an admixture time 100 generations was wrongly distinguished as GA model (see Supplementary Table S1 online). We also found that in the case of large admixture times, the error of local ancestry inference will cause underestimation of admixture time. When the admixture time is large, the ancestral tracks will be short. However, the method of inferring ancestral tracks cannot effectively determine short tracks. Thus, it will influence the accuracy of our method in inferring admixture times and model selections.
Real data analysis. Our method for parameters estimation and model selection under three typical models implemented in AdmixInfer was applied to a real dataset. First, African American was inferred as GA model and the admixture time was 12 generations ago (see Table 3). When 29 years per generation was assumed according to previous investigation 19 , it was about 350 years ago, which was consistent with the recorded history that most African ancestors arrived in America (via slave trading) after the seventeenth century. The slave trade continued until the nineteenth century and after that, many African people settled down in America. Gene flows from Africa and Europe would have continuously contributed to the African American gene pool and thus GA model matched the recorded history well. Similarly, the model for Mexicans was also inferred as GA model and the admixture time was 18 generations ago (522 years before present), which was also consistent with the time of the exploration of the new world and the arrival of Europeans. GA model indicates continuous contact and admixture of Europeans and American Indians. Moreover, all these inferences are close to previous findings 17 . Finally, we studied the admixture histories of several HGDP populations from South Asia. Previous studies have shown that the populations from South Asia have admixed ancestries mainly from Europe and East Asia 1,14 .
Regarding the admixture proportions, our estimations based on AdmixInfer (see Table 3) were consistent with previous estimations from the f-statistics 3 . Regarding the admixture model and time, the populations Balochi, Brahui, Burusho, Kalash, Pathan and Sindhi from Pakistan in South Asia were all inferred to as CGF (Sardinian as donor), which indicated extra gene flows from European ancestry after initial admixture. The initial admixture times estimated ranged from 107 to 96 generations ago. When 29 years per generation was assumed according to previous investigations 19 , these estimations (1103BC-784BC) coincided with the migration of Indo-Aryan speaking people into the Indian subcontinent. Extra gene flows from European ancestry might be contributed to by the rising of empires during the following centuries. In the case of the populations of Hazara and Uygur, they not only showed very similar admixture proportions, but also showed the same admixture model and very close admixture times; i.e., 67 and 70 generations ago, respectively. The Hazara population mainly settled in Afghanistan and Pakistan, while the Uygur population mainly settled in West China, and both populations are connected along the Silk Road. It was feasible to receive continuous gene flows from both European and East Asian ancestries. These similarities also indicated a possible close relationship or shared histories between these two populations.
In summary, our method showed good performance in inferring the admixture history of African Americans and Mexicans. The admixture scenarios in South Asian populations were more complex than expected. However, with our method, the analysis could shed light on the mysterious histories of these populations.

Discussion
In this work, we proposed a general model to describe the admixture history with multiple ancestral source populations and multiple-wave admixtures. We showed the length distribution of ancestral tracks and some of its useful properties under this general model. We thus provided a theoretical framework to study population admixture history. With the general framework, we focused on studying three special cases of admixture models (HI, GA, and CGF) and developed a method to estimate admixture proportion, admixture time and determine optimal model simultaneously. Our simulations showed that the theoretical distribution of ancestral tracks was consistent with our theoretical prediction, and our method was precise and efficient in inferring population history under the three typical models.
Comparing with the method of Gravel 9 , we deduced the length distribution of ancestral tracks without drift and assumed infinite chromosome length, and found that the length distribution was a mixed exponential distributions. Simulations demonstrated that these approximations were reasonable and accurate when admixture time T was not too small. In the case of T was too small, the length distribution did not follow an exponential distribution, as pointed out by Liang and Nielsen 20 , which could also explain the poor performance of our methods for small T (e.g. 5 generations).
In the efforts of model selection, we found that the simulations in which our method was not able to determine the correct model, were mostly those cases with recent admixture times and minor admixture proportions. The possible reason for incorrect determination was that we ignored the chromosome ends in deducing the theoretical length distribution. When the admixture proportion and times were small, the chromosomes without "observable" recombination were over-represented in the ancestral tracks (see Supplementary Fig. S8 online). Our further simulations showed that when the chromosome length increased, the accuracy of our method was enhanced. Furthermore, we note that the length distributions of ancestral tracks have no relationship with the population size. Thus, the change of population size does not affect the time estimation, which is also supported by simulations under different demographic models (see Supplementary Fig. S9 online).
The efficiency of our method could also be influenced by the validity of the local ancestry inference. To improve the reliability of the inference, we suggest using the ancestral tracks longer than a certain threshold C. However, when the threshold became large, some ancient admixture information disappeared rapidly. In  principle, if short ancestral tracks could be precisely detected, our method is promising in recovering even more ancient admixture history, such as the admixture between modern human and Neanderthals 21,22 . Though we proposed a general framework and relevant principles to infer the population history under the general model, finding optimal estimation for parameters is challenging work with high dimensionality. Currently, our method implemented in AdmixInfer is focusing on the three typical models. For the real admixed populations, the admixture history is always complex, such as discrete multiple-waves admixture. Under such circumstances, the length distribution of ancestral tracks under the general model is still broadly useful and applicable. Therefore, based on this framework, to infer more complicated admixture history is a problem to be solved in the future.