Early increased sophistication of human tools is thought to be underpinned by adaptive morphology for efficient tool manipulation. Such adaptive specialisation is unknown in nonhuman primates but may have evolved in the New Caledonian crow, which has sophisticated tool manufacture. The straightness of its bill, for example, may be adaptive for enhanced visually-directed use of tools. Here, we examine in detail the shape and internal structure of the New Caledonian crow’s bill using Principal Components Analysis and Computed Tomography within a comparative framework. We found that the bill has a combination of interrelated shape and structural features unique within Corvus and possibly birds generally. The upper mandible is relatively deep and short with a straight cutting edge and the lower mandible is strengthened and upturned. These novel combined attributes would be functional for (i) counteracting the unique loading patterns acting on the bill when manipulating tools, (ii) a strong precision grip to hold tools securely and (iii) enhanced visually-guided tool use. Our findings indicate that the New Caledonian crow’s innovative bill has been adapted for tool manipulation to at least some degree. Early increased sophistication of tools may require the co-evolution of morphology that provides improved manipulatory skills.
Human tool behaviour is underpinned by adaptations associated with enhanced manipulation of tools and tool material. For example, human shoulder and hand characteristics that allowed high-speed throwing and enhanced hand manipulation, respectively, probably evolved in Homo erectus 2–1.4 Ma1,2. Such morphological specialisation may have played a crucial role in enabling the subsequent increased sophistication of Acheulean stone tool technology2. There is little positive support for this hypothesis from nonhuman primates as their tool making is generally rather simple3 and there is no evidence that they have morphology adapted to tool behaviour. However, the complex tool skills of the New Caledonian crow (NCC, Corvus moneduloides) may be underpinned by a suite of morphological, behavioural and cognitive adaptations4.
The NCC is one of the few species with a tool-using lifestyle where tool making and use is practised year round throughout the species’ range5. The skill with which NCCs manipulate tools is impressive and shown by their technique to ‘fish’ large longhorn beetle grubs out of their burrows in dead wood6,7. To do this, some individual NCCs first use the tool tip to irritate a grub by touching sensitive areas around its large mandibles. When the grub reacts aggressively by moving its mandibles, the bird then holds the tip at the mandibles ready to extract the grub when it bites the tool. Furthermore, the level of complexity of the NCC’s tool manufacture in the wild is unrivalled among nonhumans8. On mainland Grande Terre birds craft hooked implements out of live twigs8,9,10 and remove several standardized hooked tool designs from the barbed edges of Pandanus spp. leaves using their bills8,11,12. No other nonhuman species incorporates hook technology into tool designs for foraging in the wild3,8.
The species-level tool lifestyle5, the genetic disposition for basic tool skills13,14, the dexterity of tool making and use and the complexity of tool designs together suggest that the NCC’s tool behaviour has evolved over a very long period of time. A potential morphological adaptation associated with the NCC’s tool behaviour is the shape of its bill, which is noticeably straight for a Corvus species15,16. In a qualitative investigation, we visually confirmed from images that all Corvus species except the NCC had decurved bills (Supplementary Table S1, Fig. S1). That is, the bills curve downwards at their distal ends. It has been suggested that a straight bill enables enhanced visually-guided manipulation of the working end of a tool15. The NCC appears to have separated from its closest Corvus relative around 5 Ma17, providing sufficient time for bill morphogenesis to occur18. However, there has been no in-depth study of the shape and internal structure of its bill to examine if it has been adapted for tool manipulation.
Here, we investigated if the NCC’s bill morphology has been adapted for tool behaviour. Our study had two complimentary parts. The first part set out to (i) determine the important shape characteristics that make the NCC’s bill unique among Corvus species and (ii) characterise specific shape features that might be adaptive for tool manipulation. To do this, we first compared the bill shapes of 10 Corvus species and a woodpecker species using landmark data in a Principal Components Analysis (PCA) and carried out an analysis of bill curvature. We included a woodpecker because the NCC has a woodpecker-like niche in New Caledonian forests where it extracts invertebrate prey from live and dead trees7,19. In the second part of the study we compared the internal structure and cross-sectional shape of the NCC’s bill and two other Corvus species with different foraging behaviour (the rook C. frugilegus and the large-billed crow C. macrorhynchos) based on Computed Tomography images.
Based on the 11 primary landmarks and 81 semi-landmarks located on each bill, there was obvious variation in bill morphology between the 11 species in the PCA (Fig. 1). PC1, PC2 and PC3 explained 59.18%, 10.78% and 7.87% of total variance, respectively. PC1 separated the two outlier species, the Daurian jackdaw (C. dauuricus) and the black woodpecker (Dryocopus martius), from the other nine (Corvus) species (Fig. 1A,C). Jackdaws, genetically distant from other Corvus species17,20, have shorter, stubby bills with the upper mandible longer than the lower mandible. In contrast, the black woodpecker has a long, slender bill with the lower mandible longer than the upper mandible21. PC2 separated the black woodpecker, the Daurian jackdaw and the NCC from the other species on the degree of bill curvature and length of the upper mandible (Fig. 1A,D). PC3 importantly separated the NCC from all of the other species, based on the depth of the upper mandible and a straighter, upwardly inclined lower mandible (Fig. 1B,E). For all three principal components, the PC scores for the six species with n > 1 were significantly different (species: NCC, Daurian jackdaw, rook, carrion crow C. corone, large-billed crow and black woodpecker; PC1: F5,25 = 80.50, p < 0.001; PC2: F5,25 = 58.94, p < 0.001; PC3: F5, 25 = 34.86, p < 0.001). The five Corvus species in these ANOVA tests represent Clades I, IV and VI-VIII (Supplementary Fig. S2). While the NCC is the Corvus species with a bill shape closest to that of the black woodpecker (Fig. 1A) because of its straightness, its bill also has features very different from the bill of a specialist woodpecker, such as a deeper profile and an upturned lower mandible (Fig. 1B).
The tomium of the caudal region of the NCC’s lower mandible is decurved (from 0 to around 40% of its length), similarly to that of other Corvus species and the black woodpecker (Fig. 2). Then it becomes straighter in the mid region, as in the black woodpecker, before being unique in inclining upwards to the bill tip.
Visual comparison of the NCC’s bill with those of the rook and the large-billed crow reveals distinct differences between the three species (Fig. 3). The NCC’s bill is more stout and wedge-shaped with only a slightly curved culmen (i.e., the ridgeline of the upper mandible). The rook’s bill is relatively slender, with a moderately curved culmen. The bill of the large-billed crow is relatively large with a strongly curved culmen. The NCC’s bill has characteristics that the rook and the large-billed crow lack. In particular, the tomium of the upper mandible is relatively straight but the tomium on the lower mandible has an upwards incline along much of the keel section. The base of the upper mandible caudal to the nasal openings is deeper, which reduces the curvature of the culmen. The keel is noticeably more upturned compared to the rook and the large-billed crow and takes up a greater percentage of the length of the bill. Visual comparison of Computed Tomography cross-sectional images confirm that the NCC’s bill has a relatively deeper upper mandible, a deeper profile along the middle of the keel on the lower mandible and wider rami also on the lower mandible (see selected images from each of the 3 species in Supplementary Fig. S3). The depth of the NCC’s upper mandible at the caudal edge of the nasal openings is very similar to that of the large-billed crow even though the NCC has a much shorter bill. These features provide a stout bill with a relatively square profile that should better withstand forces in all directions.
The relative amount of bone in the bills of all three species is similar in both the upper and lower mandibles (Fig. 4A,B). The two rooks have less bone between the caudal and rostral edges of the nasal openings than the NCCs and the large-billed crows, with NCC 2 having the most bone in this region. NCC 2 also seems to have more bone along much of the lower mandible. The position of the nares relative to the length of the upper bill is very similar for all three species (Fig. 4A), but the positions of the gonydeal angles confirm that the keel of the NCC is relatively longer compared to that of the rook and the large-billed crow (Fig. 4B). Imin/Imax values confirm that the rami of the NCCs become more circular towards the keel compared to the rami of the rooks and the large-billed crows (Fig. 4C). Thus the shapes of the mandibular rami in the NCC should be better able to withstand horizontal as well as vertical bending forces.
The ratio of in-lever to out-lever distance was significantly larger in the NCC (mean = 0.19, s.d. = 0.015, n = 5) compared to that in the rook (mean = 0.17, s.d. = 0.004, n = 5) and large-billed crow (mean = 0.17, s.d. = 0.004, n = 5) (F2, 12 = 7.74, p < 0.01). The larger ratio in the NCC indicates that its bill is relatively shorter than the bills of the other two species and thus capable of a relatively stronger bite.
We found that the NCC’s bill has a unique combination of morphological characteristics within the genus Corvus, predominately associated with shape rather than increased bone area. The shape features are (i) a relatively deep, short, stout bill, (ii) particularly straight tomia, especially on the upper mandible, (iii) an upward sloping tomium at the front of the lower mandible, (iv) wider mandibular rami with increased resistance to horizontal bending forces and (v) a relatively long, deep and upturned keel of the lower mandible. Although our morphological analysis did not include all Corvus species or detailed biomechanical analysis, our initial study is the first to confirm the unique morphology of the NCC’s bill. In the following we argue that the NCC’s bill morphology is specialised for tool use and at least some of the above features evolved for enhanced tool manipulation after the species began using tools.
Bill morphology in birds is a combination of both phylogeny and adaptation for species-specific task requirements22. The uniqueness of the NCC’s bill within Corvus, along with the NCC’s more recent speciation within its genus17, indicates that its novel features have evolved through species-specific adaptations. The main species-specific, interrelated factors affecting bill shape are: (i) the feeding method, (ii) the forces acting on the bill, (iii) the necessary size of the bill and (iv) the weight of the bill22. Given that the NCC’s bill appears to be relatively short for a Corvus species, we only consider the first two factors. Island passerines generally have longer bills than their close continental relatives23,24. This pattern is associated with wider ecological niches, possibly as a response to increased competition for food; longer bills are advantageous when probing in tree holes and under bark for prey24. Birds in tropical regions might also be expected to have larger bills to help dissipate excess heat25. However, the NCC’s relatively deep, short bill suggests that its shape is unlikely to be a specialisation for probing or a tropical climate. The relatively short out-lever distance compared to in-lever distance on the lower mandible also means slower tip closing velocity, making it more difficult to catch fast moving prey26. The straight tomia would be inefficient for cracking hard objects like seeds given that birds with this behaviour have very short, strongly decurved bills to provide greater crushing force22,27.
Two, not necessarily mutually exclusive, behaviours could have been important in evolving the NCC’s novel bill morphology. The first is clearly tool use, which provided a much greater extended reach for probing compared to evolving a longer bill. The second behaviour is using the bill directly to extract difficult-to-access prey from wood and forest vegetation. NCCs have a foraging niche similar to that of a woodpecker’s based on extraction of mostly invertebrate prey from trees7,19. They also sometimes drive their bills forcefully into decayed wood when excavating a hole to get a longhorn beetle grub7. This action is done with the bill slightly open to grasp and remove pieces of wood to get access to prey (GRH pers. obs.). In contrast, the more specialised woodpecker species, which dig into hard wood and have the straightest bills in the Picidae, use a slender, closed bill to chisel into wood22, as represented in PC1−PC2 coordinates in the landmark analysis (Fig. 1). Less specialised woodpeckers (e.g. the rufous piculet, Sasia abnormis) that do not excavate hard wood but can forage in softer, decaying wood like NCCs do have more decurved bills than the more specialised woodpeckers28. Birds other than woodpeckers that specialise in excavating wood to capture prey appear to have either decurved or recurved bills. For example, three South American species (Peruvian and Bolivian recurvebills, Syndactyla spp. and the recurve-billed bushbird, Clytoctantes alixii) that appear to open up hollow wood with their bills to obtain insect prey have bills where both the lower and upper tomia curve upwards29,30. The New Zealand kaka (Nestor meridionalis) specialises in extracting longhorn beetle grubs out of dead wood by using its strongly decurved parrot’s beak to dig into wood31.
Thus the combination in the NCC of a deep, short, stout bill with a straight tomium on the upper mandible and an upwardly inclined tip on the lower mandible appears to be rare or absent in other species that forage in wood. Is the NCC’s bill morphology efficient for making and using tools? Probing with a tool places a unique combination of loading patterns on the bill to resist the forces and moments acting on the bill (Fig. 5). These forces and moments are highly likely to be in all directions at some stage during the manipulation of the tip of a tool in a probe site. According to Wolff’s law, or ‘bone functional adaptation’, bone tissue and overall bone structure adapt to changes in the mechanical loading environment32. Therefore, the NCC’s bill would be expected to have unique shape aspects and internal architecture that are a direct response to the unique loading patterns imposed by tool use (e.g. to deal with loading from all directions). Furthermore, the manipulation of raw material performed by NCCs in tool making may also place unique loading patterns on their bills. For example, snapping strong, fresh twigs in half to make hooked twig tools should place considerable torque on the bill9.
In a generalised Corvus bill for a given muscle force, a deeper upper mandible at its base will exert a greater bite force at a specific location along its length compared to the same location on a shallower upper mandible of the same length22. Likewise, bite force decreases from the base of the bill to the bill tip. Finch species specialised for seed cracking have very strong bite forces because of their deep, short and highly decurved bills22. NCCs are likely to require a considerable bite force to securely hold a tool during probing activity and raw material during tool manufacture. Their bill must counteract moments and forces associated with tool use that would almost always be greater than the force acting on the tool tip. This is because the required bite force becomes larger the further the tool tip is from the bill tip (Fig. 5). The NCC’s deeper upper mandible and shorter bill are both features that would act to increase bite force at the front of the bill. The deeper, stout structure of the caudal part of the NCC’s upper mandible (Fig. 1 & Fig. 4A) might also be advantageous for counteracting high (and possibly damaging) stresses due to forces and moments acting on a rigid bill to hold a tool securely during probing and for tool manufacture.
Troscianko et al.15 suggested that the NCC’s straight bill is more efficient for visually-guided manipulation of a tool because it enables the tool tip to be positioned close to the mid-frontal plane of the bill. However, a more significant advantage of a straight bill is that it enables a tool to be securely held with the tip positioned in front of the bill as close as possible to the line of intersection between the mid-sagittal and the mid-frontal planes (Fig. 6A,D). To do this requires holding the tool angle-ways in the bill using only a relatively short rostral section of tomia on one side of the bill and the bill tip (Fig. 6A). Thus a strong bite would be highly advantageous to securely hold a tool in such a tenuous way to enable the best possible positioning of the tool tip for its efficient visually-directed control. At some sites NCC’s consistently make and use curved tools8,33,34. When they hold these tools angle-ways in their bills the curved end is usually the working end and orientated so that it curves in towards the mid-sagittal plane. Thus the working tip of a curved tool can potentially be placed in a better viewing position closer to the mid-sagittal plane than the tip of a straight tool.
Woodpecker finches use tools successfully with their curved bills by usually holding them pointing forward from the tips of their bills, not angled sideways35. This grip positions the tool tip close to the mid-sagittal plane but well below the mid-frontal plane due to the curvature of the bill, with the disadvantage of a poorer grip. To provide increased grip on the tool, a woodpecker finch must position the tool angle-ways in the bill and back from the bill tip (Fig. 6B). Although this positions the tool tip closer to the mid-frontal plane, it necessarily moves it sideways further away from the mid-sagittal plane (Fig. 6B,C). This would probably make fine manipulation of the tool tip more difficult due to requirements in visual/neuromuscular coordination. Also, the curved bills of large-billed crows trained to use tools prevented them from holding a tool close to the mid-sagittal plane36. Instead, they held the tool crossways with the tool tip positioned far from the mid-sagittal plane and used it in a sweeping action to retrieve food.
The tomia along the rhamphotheca of the NCC’s bill match closely the shape of the tomia of the underlying bone (compare Fig. 3A, B). As discussed above, the NCC’s straight upper tomium enables both a secure hold on the tool and the best possible positioning of the tool tip for its visually-directed fine manipulation. The relatively straight lower mandible further supports these two functional requirements and provides a stronger grip on the tool because of the upwardly inclined tomium towards the front of the bill. The raised, strengthened tip of the lower mandible allows the bill to function similarly to the human opposable thumb and index finger to provide a two-jaw tip-to-tip precision grip37 (see Fig. 6A). The lower mandible may therefore be analogous to the robust human thumb, which is suggested to have been strengthened primarily to counter loading associated with tool use rather than tool manufacture38,39. Thus the NCC’s deeper, short bill and the dimorphically shaped tomia are consistent with the need to securely hold a tool in the front of the bill while it is used for probing, with the tool tip positioned in the best possible viewing position. A strong precision grip would also be advantageous for the fine manipulation involved in NCC’s tool manufacture. For example, for cutting across the strong fibres of Pandanus species leaves to make pandanus tools12 and the shaping of hooks on twig tools9.
Two additional structural features of the NCC’s bill are likely to counter the forces and moments acting on the bill associated with tool manufacture and use: the wider rami and the deeper and longer keel. The specific angle-ways holding of the tool that positions the tool tip away from the mid-sagittal plane means that forces acting on the working tip of the tool create a 3-dimensional moment around the point of support (i.e. lateral bending, vertical bending and twisting of the bill). The lateral widening of the rami is likely to provide better resistance to loading from different directions. The relatively long, deep and upturned keel demonstrates that the bill is not simply a scaled down generalised Corvus bill. The strengthened keel should help to withstand the increased stresses at the front of the bill where the bite force and precision grip are concentrated, thus avoiding micro-damage of the bone structure.
In summary, we provided both qualitative and quantitative evidence to show that the morphology of the NCCs’ bill is very different from the decurved bills of all other Corvus species and possibly birds generally. The unique morphology cannot be explained by phylogeny. It is also extremely unlikely to have evolved from non-foraging-related morphogenesis to do with a founder affect or genetic drift; avian bills are generally under strong foraging-associated selection22 and there is no reason to suspect that the NCC’s bill is an exception. Furthermore, the NCC’s unique bill morphology is inconsistent with the bill morphology of other bird species that forage in wood with their bills or use tools. Our study indicates that the NCC with its unmatched tool-using lifestyle among birds has a bill much more specialised for tool manipulation. The morphological specialisation is multi-dimensional and makes the bill highly functional for tool manipulation compared to a decurved bill because of the ability to apply a strong precision grip while positioning the tool tip close to the line of intersection between the mid-frontal and mid-sagittal planes. Thus it is highly probable that at least some morphological aspects of the NCC’s novel bill evolved once the species began using tools, specifically for tool use. The implication being that a more specialised bill for tool use gave individuals greater foraging success when using tools and therefore increased fitness. We are not suggesting that the NCC’s bill shape is necessary for successful tool use as other bird species, such as the woodpecker finch, clearly accomplish this behaviour with very different bills. The tool-using woodpecker finch bill is decurved (Fig. 6B) and visually does not appear to be specialised for manipulating tools. Tool use in this species is mostly restricted to the dry season40, therefore a decurved bill may still be crucial for foraging when not using tools. In contrast, tool use in the NCC is practiced year-round. Detailed biomechanical analysis, which is beyond the scope of the current study, can be used to investigate whether the NCC’s bill is adaptive in some way. Specifically, whether the structure and shape of the NCC’s bill effectively counters the stress distribution acting on the bill when manufacturing and using tools.
A strong two-jaw thumb-to-finger precision grip in hominins is thought to have evolved for the efficient use of early simple tools rather than tool production38,39. Similarly, selection for enhanced visually-directed manipulation and a strong precision grip when using simple tools to extract prey was probably the main driving force for the NCC’s complex bill trait, which then enabled the fine manipulation required for their manufacture and use of complex hook tool designs9,12. This scenario would strengthen support for the idea that morphology adapted for enhanced tool manipulation is a prerequisite for subsequent increased sophistication of a species’ early tools2,4. Even the rapid evolution of different 3D bill shapes adapted to different foraging niches in Galápagos finches required interrelated changes in multiple genes over 2–3 million years18. Thus our findings are also the first morphology-based evidence that a nonhuman species may have evolved flexible tool behaviour over a potentially similar period of time.
Our qualitative examination of the bill shape of all Corvus species (Supplementary Table S1, Fig. S1) confirmed that the NCC was exceptional in not having a decurved bill. Thus the main objective of the PCA was to identify the important shape characteristics of the NCC’s bill that set it apart from its close relatives. To do this, we could compare the NCC’s bill with the bills of a subset of Corvus species that provided a reasonable representation of the shapes of decurved bills in the genus. The nine species that we chose represented seven of the eight clades recently identified within Corvus17. Furthermore, our selection of the nine comparison species was conservative as three of them were in the same clade as the NCC, including C. validus which shared a recent common ancestor with the NCC (Supplementary Fig. S2). This would tend to reduce the chance of detecting important differences in the NCC. We analysed the bills of 36 specimens of 10 Corvus and also included one woodpecker species (Dryocopus) (Supplementary Table S2). The specimens of Corvus, which covered seven of the eight recognised phylogenetic clades (Supplementary Fig. S2), were five NCCs (C. moneduloides, Clade VII), five Daurian jackdaws (C. dauuricus, Clade I), five rooks (C. frugilegus, Clade IV), five carrion crows (C. corone, Clade VI), seven large-billed crows (C. macrorhynchos, Clade VIII), one grey crow (C. tristis, Clade VII), one long-billed crow (C. validus, Clade VII), one Australian raven (C. coronoides, Clade VII), one fan-tailed raven (C. rhipidurus, Clade V) and one white-necked crow (C. leucognaphalus, Clade II). The specimens of Dryocopus were four black woodpeckers (D. martius), comparable in body size to NCCs. The heads of the NCC and large-billed crow were fixed in 4% paraformaldehyde in 0.1 M Phosphate buffer solution and the other specimens were preserved skins from the Yamashina Institute for Ornithology, Abiko, Japan.
We used a 3D landmark analysis to compare the overall bill shapes of the 11 species. Cross-sectional images of the head of each specimen were obtained with a micro-CT scanner (LaTheta LCT-100, Hitachi Aloka Medical, Tokyo, Japan). We next created a 3D reconstruction of each skull as a triangular mesh model based on the marching cube method, with an in-plane resolution of 0.2 mm/pixel and a gap size of 0.2 mm between images (image processing software Analyze 9.0, AnalyzeDirect, Overland Park, KS, USA).
Eleven primary landmarks of anatomically corresponding points were located on each 3D model of the bill using the software Geomagic XOS (3D Systems, Rock Hill, SC, USA) (Fig. 7). We located a total of 81 semi-landmarks evenly spaced along the curves between nine pairs of primary landmarks. The anatomical curves between landmarks were approximated by fifth-order Bézier functions to minimize the bending energy41 (Supplementary Document S1). Nine semi-landmarks were extracted along each approximated curve between the following pairs of landmarks; (i) the upper mandible tip and the nasal-frontal hinge, (ii) the upper mandible tip and the rostral end of jugal bone, (iii) the upper mandible tip and the caudal end of the jugal bone, (iv) the tip and the caudal end of the lower mandible and (v) the tip and the articular fossa of the lower mandible (Fig. 7). Semi-landmarks along (ii)-(v) were extracted for both sides of the bill.
To standardize the size and orientation of the bills, represented by a set of 92 landmarks, we normalized the 3D datasets based on centroid size and superimposed them using a least-squares method (i.e., generalised Procrustes analysis) using the geometric-morphometry software Morphologika v. 2.542. Equidistant landmarks are usually allowed to slide along curves or surfaces in geometric morphometrics since equidistance may not necessarily lead to geometrical correspondence of the landmarks across specimens43,44, resulting in possible artifacts in representing morphological variability. However, the position of the equidistant landmarks defined along the curves was found to move negligibly before and after sliding, thus having minimal affect on the extracted morphological variability41,45. Therefore, we did not slide the equidistant landmarks along the Bezier curves in the current study.
Principal Components Analysis (PCA) can be used to reduce a large set of variables to a smaller set that still contains most of the information in the larger set. To describe and quantify inter-species variation of the bills we carried out a PCA based on the variance-covariance matrix of the Procrustes residuals of all the bills42,46. To test the significance of the extracted Principal Components, we conducted an ANOVA test between species using statistical software R 3.0.3 (R Development Core Team); species with n = 1 were excluded from the analysis. To graphically show how each significant Principal Component contributes to overall bill shape, we created ‘high-value’ and ‘low-value’ wireframe models holding the values of all other Principal Components constant41.We quantitatively compared the curvature of the tomium (the inside edge) of the lower mandible among five Corvus species (carrion crow, Daurian jackdaw, large-billed crow, NCC and rook) and the black woodpecker. We calculated the profile of the bill curvature in the sagittal plane from the approximated Bezier curve fitted onto the tomium on each Computed Tomography slice along the length of the lower mandible. We used the radius length of the best-fit curve to indicate the degree of curvature (small and large radius lengths represent steep and shallow curves, respectively). Data were normalized using the length of the superior edge of the lower mandible (see Supplementary Document S1).
We used Computed Tomography imaging analysis to compare the NCC’s bill with the bills of two Corvus species that represented two general foraging methods within the genus. The rook represented a probing lifestyle and the large-billed crow an opportunist feeding lifestyle. The two NCC skulls (NCC 1 & NCC 2) were from wild-caught birds that had died unexpectedly in an outdoor aviary. The two rook skulls (Rook 1 & Rook 2) were obtained from a registered pest control operator after being culled in Hawke’s Bay, New Zealand. The two large-billed crow skulls (LaC 1 & LaC 2) were obtained in Tokyo following a culling operation. We scanned the six dried and degreased bills with the rhamphotheca removed.
The six skulls were scanned at the Auckland Radiology Group, Auckland, using a GE scanner (model Discovery CT750 HD) with an in-plane resolution of 0.14 mm/pixel and a gap size of 0.6 mm between images. The cranium and the upper mandible were scanned separately from the lower mandible. The Computed Tomography images of the upper mandible were separated from the cranium at the nasal-frontal hinge based on visual inspection. Total bone area for the upper and lower mandibles for each image was calculated using the plugin BoneJ in ImageJ. To compare the cross-sectional shapes of the rami of the lower mandibles, we calculated the minimum and maximum area moment of inertia (Imin & Imax) using the image processing software ImageJ 1.48 v, together with the macro MomentMacroJ v1.4. Imin and Imax were measures of the minimum and maximum resistance to bending about the two principal axes of a 2D cross section. We then calculated the shape ratio Imin/Imax to indicate the eccentricity of a 2D cross section, with Imin/Imax = 1 corresponding to a circular shape that is equally resistant to bending in multiple directions47. We calculated Imin/Imax values for the beam-like section of the right mandibular ramus from the rostral edge of the Fenestra rostralis to where the rami joined at the gonydeal angle (see Fig. 3).
To obtain an indication of the mechanical advantage of the three species’ bills, we also calculated the ratio of in-lever to out-lever length on the lower mandible26. In-lever length was measured from the Crista intercotylaris to the coronoid process and out-lever length from the Crista intercotylaris to the tip of the mandible (measures taken on the right side of the mandible). A relatively longer in-lever distance compared to out-lever distance indicates a relatively shorter bill with a greater mechanical advantage thus enabling a stronger bite.
How to cite this article: Matsui, H. et al. Adaptive bill morphology for enhanced tool manipulation in New Caledonian crows. Sci. Rep. 6, 22776; doi: 10.1038/srep22776 (2016).
Roach, N. T., Venkadesan, M., Rainbow, M. J. & Lieberman, D. E. Elastic energy storage in the shoulder and the evolution of high-speed throwing in Homo. Nature 498, 483–486 (2013).
Ward, C. V., Tocherib, M. W., Plavcand, J. M., Browne, F. H. & Manthif, F. K. Early Pleistocene third metacarpal from Kenya and the evolution of modern human-like hand morphology. Proc. Natl. Acad. Sci. USA 111, 121–124 (2014).
Shumaker, R. W., Walkup, K. R. & Beck, B. B. Animal tool behavior: the use and manufacture of tools by animals. (Johns Hopkins University Press, 2011).
Visalberghi, E., Sabbatini, G., Taylor, A. H. & Hunt, G. R. Cognitive insights from tool use in nonhuman animals In APA Handbook of comparative psychology : Vol. II, Cognition, emotion and personality (eds. Burghardt, G., Pepperberg, I., Call, J. C., Snowden, C. & Zentall, T. ) in the press (American Psychological Association).
Hunt, G. R., Gray, R. D. & Taylor, A. H. Why is tool use rare in animals? InTool use in animals: cognition and ecology (eds. Sanz, C., Boesch, C. & Call, J. ) 89–118 (Cambridge University Press, 2013).
Bluff, L. A., Troscianko, J., Weir, A. A. S., Kacelnik, A. & Rutz, C. Tool use by wild New Caledonian crows Corvus moneduloides at natural foraging sites. Proc. R. Soc. Lond. B 277, 1377–1385 (2010).
Hunt, G. R. Tool use by the New Caledonian crow Corvus moneduloides to obtain Cerambycidae from dead wood. Emu 100, 109–114 (2000).
Hunt, G. R. Manufacture and use of hook-tools by New Caledonian crows. Nature 379, 249–251 (1996).
Hunt, G. R. & Gray, R. D. The crafting of hook tools by wild New Caledonian crows. Proc. R. Soc. Lond. B (Suppl) 271, S88–S90 (2004).
St Clair, J. J. H., Clump, B. C., Van der Wel, J. E. M., Sugasawa, S. & Rutz, C. Strong between-site variation in New Caledonian crows’ use of hook-tool-making materials. Biol. J. Linn. Soc., 10.1111/bij.12757 (2016).
Hunt, G. R. & Gray, R. D. Diversification and cumulative evolution in New Caledonian crow tool manufacture. Proc. R. Soc. Lond. B 270, 867–874 (2003).
Hunt, G. R. & Gray, R. D. Direct observations of pandanus-tool manufacture and use by a New Caledonian crow (Corvus moneduloides). Anim. Cogn. 7, 114–120 (2004).
Kenward, B., Weir, A. A. S., Rutz, C. & Kacelnik, A. Tool manufacture by naïve juvenile crows. Nature 433, 121 (2005).
Hunt, G. R., Lambert, C. & Gray, R. D. Cognitive requirements for tool use by New Caledonian crows (Corvus moneduloides). N. Z. J. Zool. 34, 1–7 (2007).
Troscianko, J., von Bayern, A. M. P., Chappell. J., Rutz, C. & Martin, G. R. Extreme binocular vision and a straight bill facilitate tool use in New Caledonian crows. Nature Commun. 3, 1110 (2012).
dos Anjos, L. Corvidae (Crows) in Handbook of the birds of the world, vol. 14: Bush-shrikes to old world sparrows (eds. del Hoyo, J., Elliott, A. & Christie, D. A. ) 494–640 (Lynx Edicions, 2009).
Jønsson, K. A., Fabre, P.-H. & Irestedt, M. Brains, tools, innovation and biogeography in crows and ravens. BMC Evol. Biol. 12, 72 (2012).
Mallarino, R. et al. Two developmental modules establish 3D beak-shape variation in Darwin’s finches. Proc. Natl. Acad. Sci. USA 108, 4057–4062 (2011).
Rutz, C. & St Clair & J. J. H. The evolutionary origins and ecological context of tool use in New Caledonian crows. Behav. Process. 89, 153–165 (2012).
Haring, E., Gamauf, A. & Kryukov, A. Phylogeographic patterns in widespread corvid birds. Molecul. Phylogenet. Evol. 45, 840–862 (2007).
Wang, L. et al. Why do woodpeckers resist head impact injury: A biomechanical investigation. PLoS One 6, e26490 (2011).
Bock, W. J. An approach to the functional analysis of bill shape. Auk 83, 10–51 (1966).
Grant, P. R. Bill size, body size and the ecological adaptations of bird species to competitive situations on islands. Syst. Zool. 17, 319–333 (1968).
Luther, D. & Greenberg, R. The Island syndrome in coastal wetland ecosystems: convergent evolution of large bills in mangrove passerines. Auk 128, 201–204 (2011).
Danner, R. M. & Greenberg, R. A critical season approach to Allen’s rule: bill size declines with winter temperature in a cold temperate environment. J. Biogeogr. 42, 114–120 (2015).
Corbin, C. E., Lowenberger, L. K. & Gray, B. L. Linkage and trade-off in trophic morphology and behavioural performance of birds. Funct. Ecol. 29, 808–815 (2015).
Soons, J. et al. Mechanical stress, fracture risk and beak evolution in Darwin’s ground finches (Geospiza). Phil. Trans. R. Soc. Lond. B 365, 1093–1098 (2010).
Bock, W. J. Functional and evolutionary morphology of woodpeckers. Ostrich 70, 23–31 (1999).
Remsen, J. V. Jr. Family Furnariidae (Ovenbirds) In Handbook of the birds of the World, vol. 8: Broadbills to Tapaculos (eds. del Hoyo, J., Elliott, A. & Sargatal, J. ) 162–357 (Lynx Edicions, 2013).
Zimmer, K. & Isler, M. I. Family Thamnophilidae (Typical antbirds) in Handbook of the Birds of the World, vol 8: Broadbills to Tapaculos (eds. del Hoyo, J., Elliott, A. & Christie, D. A. ) 448–681 (Lynx Edicions, 2013).
Beggs, J. R. & Wilson, P. R. Energetics of South Island kaka (Nestor meridionalis meridionalis) feeding on the larvae of kanuka longhorn beetles (Ochrocydus huttoni). N. Z. J. Ecol. 10, 143–147 (1987).
Ruff, C., Holt, B. & Trinkaus, E. Who’s afraid of the big bad Wolff? : “Wolff’s Law” and bone functional adaptation. Am. J. Phys. Anthropol. 129, 484–498 (2006).
Hunt, G. R. & Gray, R. D. Species-wide manufacture of stick-type tools by New Caledonian crows. Emu 102, 349–353 (2002).
St Clair, J. J. H. & Rutz, C. New Caledonian crows attend to multiple functional properties of complex tools. Phil. Trans. R. Soc. Lond. B 368, 20120415 (2013).
Rutledge, R. & Hunt, G. R. Lateralized tool use in wild New Caledonian crows. Anim. Behav. 67, 327–332 (2004).
Kanai, M., Matsui, H., Watanabe, S. & Izawa, E.-I. The involvement of vision in tool use in the crow. NeuroReport 25, 1064–1068 (2014).
Marzke, M. W. Precision grips, hand morphology and tools. Am. J. Phys. Anthropol. 102, 91–110 (1997).
Williams, E. M., Gordon, A. D. & Richmond, B. G. Hand pressure distribution during Oldowan stone tool production. J. Hum. Evol. 62, 520–532 (2012).
Skinner, M. et al. Human-like hand use in Australopithecus africanus. Science 347, 395–399 (2015).
Tebbich, S., Taborsky, M., Fessl, B. & Dvorak, M. The ecology of tool-use in the woodpecker finch (Cactospiza pallida). Ecol. Lett. 5, 656–664 (2002).
Morita, Y., Ogihara, N., Kanai, T. & Suzuki, H. Quantification of neurocranial shape variation using shortest paths connecting pairs of anatomical landmarks. Am. J. Phys. Anthropol. 151, 658–666 (2013).
O’Higgins, P. & Jones, N. Facial growth in Cercocebus torquatus: an application of three-dimensional geometric morphometric techniques to the study of morphological variation. J. Anat. 193, 251–272 (1998).
Bookstein, F. L. Landmark methods for forms without landmarks: morphometrics of group differences in outline shape. Med. Image Anal. 1, 225–243 (1997).
Gunz, P., Mitteroecker, P. & Bookstein, F. L. Semilandmarks in three dimensions In Modern morphometrics in physical anthropology (ed. Slice D. E. ) 73–98 (Springer: US, NY, 2005).
Morita, Y., Amano, H. & Ogihara, N. Three-dimensional endocranial shape variation in the modern Japanese population, Anthropol. Sci. 123, 185–191 (2015).
O’Higgins, P. The study of morphological variation in the hominid fossil record: biology, landmarks and geometry. J. Anat. 197, 103–120 (2000).
Farke, A. A. & Alicea, J. Femoral strength and posture in terrestrial birds and non-avian theropods. Anat. Rec. 292, 1406–1411 (2009).
We thank the Direction de l’Environnement (Province Sud) and the Direction du Développement Economique et de l’Environnement (Province Nord) for permission to carry out New Caledonian crow research on Grande Terre. We also thank Jake Bowcock for access to rook carcasses, Vicky Shim for help with the imaging analysis, Yasuko Iwami for assistance with CT scanning of landmark analysis and helpful advice. Guido de Filippo drew Fig. 6B and Supplementary Fig. S1 and gave us helpful advice on Fig. 6. GRH, RDG and KO received funding from the Royal Society of New Zealand Marsden Fund (project UOA1208). E.-II received funding from JSPS KAKENHI (Grant #25330175), the Narishige Zoological Science Award and Keio Gijuku Academic Development Funds. YT received funds from JSPS KAKENHI (Grant #24120002).
The authors declare no competing financial interests.
Electronic supplementary material
About this article
Cite this article
Matsui, H., Hunt, G., Oberhofer, K. et al. Adaptive bill morphology for enhanced tool manipulation in New Caledonian crows. Sci Rep 6, 22776 (2016). https://doi.org/10.1038/srep22776
Neuroscience and Behavioral Physiology (2022)
False memory for faces is produced by the Deese-Roediger-McDermott paradigm based on the morphological characteristics of a list
Current Psychology (2022)
New Caledonian crows' basic tool procurement is guided by heuristics, not matching or tracking probe site characteristics
Animal Cognition (2021)
Science China Life Sciences (2019)
Scientific Reports (2018)