## Abstract

Any optical quantum information processing machine would be comprised of fully-characterized constituent devices for both single state manipulations and tasks involving the interaction between multiple quantum optical states. Ideally for the latter, would be an apparatus capable of deterministic optical phase shifts that operate on input quantum states with the action mediated solely by auxiliary signal fields. Here we present the complete experimental characterization of a system designed for optically controlled phase shifts acting on single-photon level probe coherent states. Our setup is based on a warm vapor of rubidium atoms under the conditions of electromagnetically induced transparency with its dispersion properties modified through the use of an optically triggered N-type Kerr non-linearity. We fully characterize the performance of our device by sending in a set of input probe states and measuring the corresponding output via time-domain homodyne tomography and subsequently performing the technique of coherent state quantum process tomography. This method provides us with the precise knowledge of how our optical phase shift will modify any arbitrary input quantum state engineered in the mode of the reconstruction.

### Similar content being viewed by others

## Introduction

Emergent quantum optical technologies that will one day comprise the heart of future quantum networks and computers will necessitate that their performance be understood precisely. Furthermore, these devices will require the capacity for both single and multi-mode quantum processing. While a majority of recent experimental advancements regarding light-matter interaction at the quantum level have focused on operations involving a single quantum optical state^{1,2,3,4}, further functionalities are necessary in order to implement a future quantum processing machine. Namely the creation of fully-characterized quantum light-matter interfaces suited for the interaction between weak quantum optical states and triggering signal fields mediated by atoms.

The success of such deterministic, multi-field gates is contingent on two stringent conditions: the first is achieving a large cross-talk between quantum-level fields^{5}. The second is the generation of relative non-linear phase operations that can act on either discrete qubit variables or continuous quadrature modes^{6}. Different avenues are currently being pursued to overcome the first obstacle. One is the use of highly excited Rydberg states, that have demonstrated the promise for creating a sizeable non-linear medium for individual photons to propagate and interact^{7,8}. Another is the use of strong light-matter interaction, as provided by cavity quantum electrodynamics (cQED)^{9,10,11,12,13}.

Addressing the second condition remains a challenge, yet is key to building truly functional quantum logic gates. Previously, electromagnetically-induced transparency (EIT) enhanced Kerr non-linearities utilizing atomic four-level schemes^{14,15} have been used to realize small phase shifts for few photon level classical fields using atomic ensembles^{16,17,18,19}. However, fundamental questions concerning how the non-instantaneous behavior of such Kerr non-linearities precludes the creation of overall phase-shifts still persist^{20,21}.

Therefore, the availability of evaluation tools that allow the direct characterization of these deterministic phase-shift operations so one can know *a priori* its function regarding specific quantum optical states inputs would be indispensable. Accomplishing such a task in a tractable manner could be attained with relatively simple technological methods, namely EIT non-linearities in room temperature atomic vapor^{22,23,24,25,26} in combination with full quantum optical characterization via coherent state quantum process tomography (csQPT)^{27,28}.

Here we report the first complete quantum optical characterization of an engineered phase shift triggered via atomic Kerr non-linearities. We use a room temperature setup capable of optically controlled phase shifts of ~π/2 radians acting on single-photon level probe pulses, triggered by a classical signal field. Our system is realized in a vapor of ^{87}Rb atoms under the conditions of EIT in a N-type energy level scheme coupled by three optical fields. We probe our system with weak coherent states and measure the phase and amplitude quadratures of the input and output via time-domain homodyne tomography allowing us to perform quantum state reconstruction and directly compare the corresponding density matrices. Further, by collecting the output data for a sufficient set of weak coherent state inputs, we gain the information needed to completely characterize the phase shift process by csQPT. The resulting process reconstruction yields a rank-4 process super-operator in the Fock states basis which can then be utilized to find out how our phase shift process will behave on arbitrary quantum optical states, either with discrete variables in the Fock basis on in the continuous variable regime.

## Experimental Setup

We start with a three-level, Lambda atomic EIT scheme composed of two hyperfine grounds states that couple to a common excited state by a weak probe field ω_{p} and a strong control field ω_{c}. The N-type scheme is completed by a third, signal field ω_{s} that couples one of the original Lambda ground states to a separate excited state (see Fig. 1a). This signal field induces a cross-phase modulation on the probe giving rise to a relative optical phase shift between the fields^{14,15}.

For the primary Lambda system, we utilize two external cavity diode lasers phase-locked at 6.8 GHz to correspond to the ^{87}Rb ground state splitting. The probe field is situated 180 MHz red detuned from the transition with the control field set to the transition; both lasers are at a wavelength of 795 nm. Lastly, for the signal field we have an additional, third diode laser set to the transition at 780 nm (Fig. 1a). In our measurements, the signal field is red-detuned by 11.9 MHz. Furthermore, the control and signal field are fixed to have the same linear polarization with the probe field set to the orthogonal polarization to allow for convenient separation of the fields after atomic interaction. All fields are also spatially mode matched to a waist of ω_{0} ≈ 200 *μm* in a single-rail configuration (see Fig. 1b). In the pulsed regime the intensity of the probe and control fields are temporally modulated by means of acousto-optical modulators (AOM). For our medium we use a 7.5 cm long glass cell with anti-reflection coated windows containing isotopically pure ^{87}Rb with 10 Torr of Ne buffer gas kept at a temperature of 336 K. The cell is pumped with a 1.75 mW control field for 25 μs before a probe pulse of 1 μs temporal duration is coupled into the vapor. After 30 μs, the control field is shut off and a second probe pulse is sent through the vapor cell to serve as a reference (see Inset of Fig. 1c). The repetition rate of the entire experiment was 25 kHz.

When only the control field is present, the probe pulse sees a characteristic EIT transparency (see Fig. 2b, green line) causing it to experience both slowdown conditions and an optical phase shift. The presence of a mode-matched signal field can then negate this EIT effect (see Fig. 2b, light blue line). Furthermore, the phase shift undergone by the probe pulse can be controllably reduced by applying a particular power of the continuous wave signal field, as changes in transmission correspond to strong dispersion modifications in the atomic medium.

The magnitude of this phase shift is quantified using time domain homodyne tomography^{29}. To do so, we couple both the probe mode after atomic interaction and a strong local oscillator (LO, coming from the same laser) to fibers and interfere them. Prior to interference, the local oscillator is reflected off a mirror attached to a piezoelectric device to permit control of the phase and allow total tomographic reconstruction (see Fig. 1).

In order to quantify the temporal envelope of our weak probe pulses, we first recorded the intensity of bright classical pulses undergoing the different measurement conditions on an auxiliary photodetector (not shown, see pulses in Fig. 1c). From this data, the shape and length of the probe’s electric field envelope were calculated. A weighted integration over the homodyne signal using the electric field envelope for a given pulse then yields its time averaged quadrature value. For all input pulses, those subjected to EIT slowdown and the N-type conditions, we acquired 50 000 balanced homodyne values in the time domain by an oscilloscope dual triggered to the pulse start point and piezo scan. The optical phase shift experienced by the probe pulses under EIT and N-type conditions can then be directly quantified by fitting this quadrature measurement data (see Fig. 2a). The second probe pulse sent after the control field is shut off serves to determine the baseline phase of the interferometer from which the phase induced to the initial pulse can then be calculated. This data is then entered into a maximum-likelihood algorithm in order to generate the quantum state (see Fig. 3) or to perform quantum process reconstruction in the Fock basis (see Fig. 4).

## Discussion

The phase shift undergone by a single state when subjected to EIT conditions can be understood through direct visualization of the state’s Wigner function in phase space. This can be found by first entering the measured phase and quadrature data into a maximum-likelihood algorithm to obtain the state’s density matrix^{30} followed by direct calculation of the experimental Wigner function^{31}. The information granted by these types of measurements can extend on previous studies^{15,17,18} as we now attain the full density matrices of the output, which can be compared directly to that of the input. As an example, for an input coherent state containing a mean photon number of ((A) in Fig. 3a), we measure a phase shift of Δθ_{EIT} = 2.13 ± 0.04 rads when subjected to EIT slowdown ((B) in Fig. 3a). Moreover, we measure the decrease of this phase shift in the N-type scheme when a 2.1 mW signal field is present ((C) in Fig. 3a). In this case, the phase shift with respect to the input is found to be Δθ_{N-type} = 0.67 ± 0.04 rads. Hence, the optically induced phase difference between the two schemes is Δθ_{N-type} − Δθ_{EIT} = − 1.46 ± 0.06 rads. From this analysis, we can also find the mean quadrature variance of the input and output states. In this case, the variance values corresponding to the input, slowdown and N-type schemes were found to be 0.517 ± 0.004, 0.562 ± 0.008, 0.517 ± 0.004 respectively. We can see increased deviations from an ideal coherent state for the reconstructed slowdown state^{32} which are lessened under the N-type conditions as a result of the losses. Note that due to the losses experienced by the probe in our EIT schemes, the phase shifted Wigner functions are now situated closer to the phase space origin than the original input state. Here, the transmissions of the EIT and N-type schemes averaged 25% and 3.5% respectively. The non-linearity of our Kerr-based optical phase shift is demonstrated in Fig. 3b which shows the measured phase shift versus the signal field power.

We now turn our attention to characterizing the Kerr-based optical phase shift process through means of coherent state quantum process tomography (csQPT)^{27}. This is a procedure akin to a “blackbox” problem but in the quantum domain, i.e. given any arbitrary but known quantum state we can predict , where represents our process. Quantum process tomography is derived from the fact that all quantum processes are linear in the space of density matrices in the Hilbert space defining the process. More specifically, the technique of csQPT uses coherent states from a common laser source to produce a set of “probe” states spanning the Hilbert space where our process will be characterized. Therefore, by subjecting an ample number of coherent states to our optically controlled phase shift and recording the corresponding output , we are provided with the needed information to completely characterize our process for a finite region in a relatively simple and robust manner.

To accomplish csQPT experimentally, we measured the output states of both the EIT slowdown and N-type processes along with their corresponding inputs for 13 different coherent states with input amplitudes α_{i} ranging from 0 to 3.3. This was done for 6 different signal field powers each serving as their own separate characterization. Hence, the temporal modes for every set of conditions was independently measured to account for the group velocity experienced by the probe at a particular signal field power, these temporal modes are shown in Fig. 4a. Note that the parameters used to achieve our base EIT slowdown conditions remained constant at all times.

The data obtained through time-domain homodyne tomography was binned into 40 phase and 40 quadrature bins to encompass the entire range of the coherent state measurements. The binned data was then entered into a maximum-likelihood reconstruction algorithm in line with the procedures described in^{28} to obtain the process super-operator. Our process was phase invariant, meaning that any fixed phase difference between two input states was preserved after the process and allowed a majority of the elements to be extinguished. With our data, we found 100 iterations of the maximum-likelihood algorithm to be adequate for our reconstruction to converge. This was followed by a truncation of our process superoperator to a maximum photon number of *n* = 5. Note that the linear losses not associated with the process (detector efficiencies, visibilities, etc.) experienced by the probe states were quantified and corrected for in the same manner as was done in prior studies^{33}. All the information related to the atomic interaction remains in the tensor elements.

Our process reconstruction provides a mapping of the input density matrix elements to the resulting output elements holding both the phase and photon number information. While the on-diagonal elements exhibiting the photon number information have been shown in prior studies^{27,32,33}, the off-diagonal elements holding the phase information have received less attention^{34} but are of higher relevance in this study. This information can be extracted from the components relating how the input density matrix space maps to a particular off-diagonal element of the output. The pertinent information can be visualized by taking specific slices of the process tensor, where for instance, the phase value for the output density matrix element is related to the process tensor elements. Figure 4b shows these tensor elements for different powers of the signal field where the height of the elements indicates the size of the phase shift relative to the original input state. In general, it is the summation over the product of these elements with their density matrix counterparts that yields the phase of the output element given by

As expected, the phase component is independent of the input amplitude α (see Fig. 4) over the subspace in which the process was characterized. The errors in the process tensor elements shown in Fig. 4b are those of our experimental statistics and were found to be about ±0.06 rads in all measurements. Other errors include the statistical nature of our quadrature measurements and how they pertain to the quality of our process tensor reconstructions. To evaluate these effects, we simulated multiple data sets by random variation of the quadrature counts at a given phase within its standard deviation. We then reconstructed a set of simulated process tensors and calculated their fidelity with respect to our original reconstruction using the Jamiolkowski state representation. We found these fidelities to be near unity with none of the tensor elements shown in Fig. 4b deviating more than 0.5% of the original value.

The power of csQPT is the ability to make predictions about the process output, or specifically in our case, know *a priori* how our optical phase shift and losses modify input quantum optical states. To exemplify these capabilities, we acted the process tensor reconstructions corresponding to the weakest signal field power of 0.55 mW on a quantum optical state in the form of a theoretical squeezed vacuum with ± 4.3 dB of anti-squeezing and squeezing^{35,36}. For the EIT slowdown we found the predicted output state exhibited and in the squeezed and anti-squeezed quadratures respectively with a phase shift of Δθ_{EIT} = 2.12 ± 0.03 rads with respect to the input. Likewise for the N-type scheme, our prediction yielded values of , and a phase shift of Δθ_{N-type} = 1.48 ± 0.03 rads. Full information relating the output state predictions to our reconstructed superoperator is shown in Fig. 5.

Finally, note that our experimental gate characterization can be applied to any quantum phase gate architecture including those involving discrete variables. For instance, a characterized phase rotation of ϕ means that our process superoperator would act on a Fock state qubit such that and hence, csQPT could be an effective tool to determine how qubit variables are modified, thus the benchmarking of quantum gate operations becomes a possibility.

In summary, we have characterized a Kerr non-linear process in the form of an optically controlled phase shift mediated by atoms at room temperature via the method of csQPT. Our study signifies the first time that such an optical gate operation, key for creating quantum optical information processors, has been fully characterized quantum mechanically. These processes comprise a major part of the more general set of operations involving multi-field interactions^{37}.

The csQPT technique is achieved with relatively simple optical measurements by probing our phase shift system with only a sufficient set of weak laser pulses and measuring the corresponding output. Further, we highlighted the potential for this method by using our process reconstruction to predict the effect of our phase shift on a squeezed vacuum state. The simplicity and robustness of this characterization procedure would make it ideal for the facilitation of practical quantum optical gates into future networks and provide an universal tool for the characterization of multi-state quantum components.

As an outlook, we envision bringing our warm vapor implementation towards a true photon-photon phase gate using higher optical densities in a confined volume, as obtained for example by using cavity electromagnetically induced transparency in room temperature atoms^{38}. Quantum gate operation could also be envisioned by combining cavity and dual-rail polarization qubit operation^{39}.

## Additional Information

**How to cite this article**: Kupchak, C. *et al.* Quantum Process Tomography of an Optically-Controlled Kerr Non-linearity. *Sci. Rep.* **5**, 16581; doi: 10.1038/srep16581 (2015).

## References

Lvovsky, A. I., Sanders, B. C. & Tittel, W. Optical quantum memory. Nature Photonics 3, 706 (2009).

Bussières, F. et al. Prospective applications of optical quantum memories. J. Mod. Opt. 60, 1519 (2013).

Northup, T. E. & Blatt, R. Quantum information transfer using photons. Nature Photonics 8, 356 (2014).

Reiserer, A. & Rempe, G. Cavity-based quantum networks with single atoms and optical photons.

*arXiv*:**1412**.2889v2 (2015).Chang, D. E., Vuletic, V. & Lukin, M. D. Quantum nonlinear optics - photon by photon. Nature Photonics 8, 685 (2014).

Braunstein, S. L. & Pati, A. K. Quantum Information with Continuous Variables. Kluwer Academic (2003).

Peyronel, T. et al. Quantum nonlinear optics with single photons enabled by strongly interacting atoms. Nature 488, 57 (2012).

Firstenberg, O. et al. Attractive photons in a quantum nonlinear medium. Nature 502, 71 (2013).

Reiserer, A., Kalb, N., Rempe, G. & Ritter, S., A quantum gate between a flying optical photon and a single trapped atom. Nature 508, 237 (2014).

Tanji-Suzuki, H., Chen, W., Landig, R., Simon, J. & Vuletic, V. Vacuum-induced transparency. Science 333, 1266 (2011).

Chen, W. et al. All-optical switch and transistor gated by one stored photon. Science 341, 768 (2013).

Tiecke, T. G. et al. Nanophotonic quantum phase switch with a single atom. Nature 508, 241 (2014).

Volz, J., Scheucher, M., Junge, C. & Rauschenbeutel, A. Nonlinear π phase shift for single fibre-guided photons interacting with a single resonator-enhanced atom. Nature Photonics 8, 965 (2014).

Imamog–lu, A., Schmidt, H., Woods, G. & Deutsch, M. Strongly interacting photons in a nonlinear cavity. Phys. Rev. Lett. 79, 1467 (1997).

Kang, H. & Zhu, Y. Observation of large Kerr nonlinearity at low light intensities. Phys. Rev. Lett. 91, 093601 (2003).

Bajcsy, M. et al. Efficient all-optical switching using slow light within a hollow fiber. Phys. Rev. Lett. 102, 203902 (2009).

Shiau, B. -W., Wu, M. -C., Lin, C. C. & Chen, Y. -C. Low-light-level cross-phase modulation with double slow light pulses. Phys. Rev. Lett. 106, 193006 (2011).

Lo, H. -Y. et al. Electromagnetically-induced-transparency-based cross-phase-modulation at attojoule levels. Phys. Rev. A 83, 041804 (2011).

Hosseini, M. et al. Memory-enhanced noiseless cross-phase modulation. Light: Science & Applications 1, e40 (2012).

Shapiro, J. H. Single-photon Kerr nonlinearities do not help quantum computation. Phys. Rev. A 73, 062305 (2006).

Gea-Banacloche, J. Impossibility of large phase shifts via the giant Kerr effect with single-photon wave packets. Phys. Rev. A 81, 043823 (2010).

Pack, M. V., Camacho, R. M. & Howell, J. C. Transients of the electromagnetically-induced-transparency-enhanced refractive Kerr nonlinearity: Theory. Phys. Rev. A 74, 013812 (2006).

Pack, M. V., Camacho, R. M. & Howell, J. C. Transients of the electromagnetically-induced-transparency-enhanced refractive Kerr nonlinearity. Phys. Rev. A 76, 033835 (2007).

Li, R. B., Deng, L. & Hagley, E. W. Fast, all-optical, zero to π continuously controllable Kerr phase gate. Phys. Rev. Lett. 110, 113902 (2013).

Zhu, C., Deng, L. & Hagley, E. W. Polarization-selective Kerr-phase-shift method for fast, all-optical polarization switching in a cold atomic medium. Phys. Rev. A 90, 063841 (2014).

Li, R. B., Deng, L. & Hagley, E. W. Fast, all-optical logic gates and transistor functionalities using a room-temperature atomic controlled Kerr gate. Phys. Rev. A 90, 063806 (2014)

Lobino, M. et al. Complete characterization of quantum-optical processes. Science 322, 563 (2008).

Anis, A. & Lvovsky, A. I. Maximum-likelihood coherent-state quantum process tomography. New J. Phys. 14, 105021 (2012).

Lvovsky, A. I. & Raymer, M. G. Continuous-variable optical quantum-state tomography. Rev. Mod. Phys. 81, 299–332 (2009).

Lvovsky, A. I. Iterative maximum-likelihood reconstruction in quantum homodyne tomography. J. Opt. B 6, S556 (2004).

Leonhardt, U. Measuring the Quantum State of Light. Cambridge University Press (1997).

Lobino, M., Kupchak, C., Figueroa, E. & Lvovsky, A. I. Memory for light as a quantum process. Phys. Rev. Lett. 102, 203601 (2009).

Kumar, R., Barrios, E., Kupchak, C. & Lvovsky, A. I. Experimental characterization of bosonic creation and annihilation operators. Phys. Rev. Lett. 110, 130403 (2013).

Fedorov, I. A., Fedorov, A. K., Kurochkin, Y. V. & Lvovsky, A. I. Tomography of a multimode quantum black box. New J. Phys. 17, 043063 (2015).

Figueroa, E., Lobino, M., Korystov, D., Appel, J. & Lvovsky, A. I. Propagation of squeezed vacuum under electromagnetically induced transparency. New. J. Phys. 11, 013044 (2009).

Jamiolkowski, A. Linear transformations which preserve trace and positive semidefiniteness of operators. Rep. Math. Phys. 3, 275 (1972).

Cooper, M., Slade, E., Karpinski, M. & Smith, B. J. Characterization of conditional state-engineering quantum processes by coherent state quantum process tomography New J. Phys 17, 033041 (2015).

Wu, H., Gea-Banacloche, J. & Xiao, M. Observation of intracavity electromagnetically induced transparency and polariton resonances in a Doppler-broadened medium. Phys. Rev. Lett. 100, 173602 (2008).

Kupchak, C. et al. Room-temperature single-photon level memory for polarization states. Sci. Rep. 5, 7658 (2015).

## Acknowledgements

This work was supported by the US-Navy Office of Naval Research, grant number N00141410801 (instrumentation) and the National Science Foundation, grant number PHY-1404398 (personnel and materials). The authors kindly thank A. I. Lvovsky for sharing his maximum likelihood QPT algorithm. C. K. acknowledges financial support from the Natural Sciences and Engineering Research Council of Canada. B. J. acknowledges financial assistance of the National Research Foundation (NRF) of South Africa.

## Author information

### Authors and Affiliations

### Contributions

C. K., S. R., B. J. and E. F. all contributed to the implementation and modelling of the experiment, the interpretation of the results and the writing of the manuscript.

## Ethics declarations

### Competing interests

The authors declare no competing financial interests.

## Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

## About this article

### Cite this article

Kupchak, C., Rind, S., Jordaan, B. *et al.* Quantum Process Tomography of an Optically-Controlled Kerr Non-linearity.
*Sci Rep* **5**, 16581 (2015). https://doi.org/10.1038/srep16581

Received:

Accepted:

Published:

DOI: https://doi.org/10.1038/srep16581

## Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.