The Open Field (OF) test is one of the most commonly used assays for assessing exploratory behaviour and generalised locomotor activity in rodents. Nevertheless, the vast majority of researchers still rely upon costly commercial systems for recording and analysing OF test results. Consequently, our aim was to design a freely available program for analysing the OF test and to provide an accompanying protocol that was minimally invasive, rapid, unbiased, without the need for specialised equipment or training. Similar to commercial systems, we show that our software—called MouseMove—accurately quantifies numerous parameters of movement including travel distance, speed, turning and curvature. To assess its utility, we used MouseMove to quantify unilateral locomotor deficits in mice following the filament-induced middle cerebral artery occlusion model of acute ischemic stroke. MouseMove can also monitor movement within defined regions-of-interest and is therefore suitable for analysing the Novel Object Recognition test and other field-related cognitive tests. To the best of our knowledge, MouseMove is the first open source software capable of providing qualitative and quantitative information on mouse locomotion in a semi-automated and high-throughput fashion and hence MouseMove represents a sound alternative to commercial movement analysis systems.
The Open Field (OF) test is amongst the most commonly used assays for monitoring exploratory behaviour and locomotor activity in laboratory animals1. The OF test relies on the principle that rodents and other laboratory animals will innately explore novel surroundings. Ideally, the OF should be devoid of visual landmarks, olfactory cues and be situated in a quiet dimly lit room; so as to encourage exploration and ambulation, to minimise learning/memory triggers and to reduce stress on the laboratory animal during testing. It is because of these simple underlying principles and low animal handling requirements that the OF test represents a relatively quick, reproducible and robust assay. Accordingly, the OF test has been used to assess neurological effects across a wide array of experimental paradigms, including acquired brain injury2, psychostimulant administration3, stress/anxiety induction4, aging5, gender5, circadian cycling6, differing genophenotypic backgrounds7 and environmental factors8.
Despite its widespread popularity, the vast majority of research groups rely upon commercial systems for recording and digitally analysing the OF test. These commercial system use an overhead video camera or a laser-gridded arena and quantify movement parameters using proprietary software. Examples of current commercial systems capable of performing OF testing include the ANY-maze (Stoelting Co; IL, USA), Ethovision® XT (Noldus; Wageningen, The Netherlands), TopScan (Clever Sys Inc.; VA, USA) and Opto-Varimex (Columbus Instruments; OH, USA). While these commercial systems are excellent in their recording and analytical capability, they are relatively expensive, offer little methodological transparency or flexibility and often restrict OF testing to laboratories with the financial means to establish specialised behavioural suites.
Numerous open source programs have been released as alternatives to the commercial OF systems9,10,11,12,13. All but one of these prior programs restricts its analyses to two main aspects of movement: travel distance and time spent within a defined region-of-interest (ROI). The most recent freeware, EthoWatcher, represents a significant improvement in that it allows users to analyse a wider array of rodent movement parameters such as grooming and rearing behaviours13. This being said, many other routine aspects of movement, including stationary fraction, object speed, laterality differences or ROI time, in combination with capacity for batch analysis, are currently not addressed by existing programs. As a result, commercial systems still offer vastly superior performance and throughput for OF test analysis.
Here we describe MouseMove—an open source program that offers semi-automated and high-throughput analysis of a wide array of movement parameters, including distance travelled, mean speed, speed variance, stationary fraction and laterality (i.e. left/right turn, turning offset and curvature). Using a model of acquired brain injury (the transient middle cerebral artery occlusion [MCAo] model of experimental stroke), which is well known to cause altered locomotion14,15, we show that MouseMove can discern both quantitative and qualitative differences in movement across an OF. Importantly, using a mechanical calibration system, we demonstrate that MouseMove tracks changes in distance, speed and laterality with >96% accuracy. MouseMove also has a region-of-interest function which allows quantitative analysis of cognitive tests such as the Novel Object Recognition (NOR) test. Taken together, MouseMove represents a sound and freely available alternative to commercial platforms for analysing arena-related assays such as the OF test and the NOR test.
Design of an OF, automated image processing and movement analysis using MouseMove
An OF arena was first assembled to test MouseMove. As shown in Fig. 1, the OF had a circular white melamine floor, black plastic walls, was surrounded by a white polyester curtain and had a webcam positioned above its centre. For each OF test, a mouse is placed in the centre of the arena and video footage captured (‘experiment video’, Fig. 2a; refer to Methods for details). Directly after testing, a ~10 second video of the empty arena is captured (‘background video’, Fig. 2b). The open source program, ImageJ, is then initialised and the ‘experiment’ and ‘background’ videos are uploaded (Fig. 2c) using our ImageJ macro Preprocessing.ijm (Supplementary File 1). The macro automatically performs the following stepwise processes: Step 1—thresholding of the raw videos to create binary videos. Step 2—x,y alignment between the experiment and background videos (Fig. 2d,e). Step 3—subtraction of the aligned background video from the experiment video (Fig. 2f). Step 4—object recognition and trajectory generation using the published MTrack2 plugin16. The macro generates a saveable image of the mouse’s cumulative trajectories (Fig. 2g) and a text file stipulating the x,y coordinates of the mouse over time. Next, MouseMove’s graphical user interface (GUI) is initialised. Pertinent parameters (video frame rate, range of frames to be analysed, spatial scale of the video) and the location of the macro-generated text file are entered using MouseMove.exe (Supplementary File 2) A detailed analysis of the movement patterns is then automatically performed, whereby MouseMove measures the fractional time spent stationary, distance travelled, speed mean/standard error of the mean (s.e.m.) and various indices of laterality (number of left turns, number of right turns, ratio of left:right turns (LRratio), turn offset and curvature radius). By default, the analytical results of MouseMove are depicted in both a visual/graphical form (Fig. 2h) and as a saveable text file (Fig. 2i).
Mechanical calibration of MouseMove
To calibrate MouseMove we took video footage of a mouse-shaped object affixed to a perspex arm being driven by a speed-controlled rotor (Fig. 3a). We tested MouseMove’s tracking capabilities across a range of defined speeds and curvatures by varying the position of the mouse-shaped object along the perspex arm (Fig. 3b). Via this approach, we found that MouseMove quantified movement parameters such as distanced travelled, speed and curvature radius with >96% accuracy (Fig. 3c). Importantly, the calibration settings encompass the range of movement typically exhibited by adult mice (as determined by batch analysis of >150 mice; data not shown).
As an additional means with which to assess accuracy, we attempted to correlate the findings of MouseMove with that of EthoWatcher software for the speed-controlled rotor videos (Fig. 3) and for the videos of sham- or MCAo-operated mice (Figs 4 and 5). Unfortunately, this comparison could not be made due to inconsistencies in the object tracking function of EthoWatcher (data not shown).
MouseMove analysis can be used to quantify reduced locomotor activity in mice after experimental stroke
To demonstrate the utility of MouseMove in an experimental setting, we used it to analyse the OF behaviour of mice that had undergone the MCAo model of acute ischaemic stroke, which is well known to produce focal unilateral cerebral infarction and impaired locomotor activity in rodents14,15,17. MouseMove highlighted both qualitative (Fig. 4a and Supplementary Video 1) and quantitative (Fig. 4b–d) differences in locomotor activity between sham-operated mice and MCAo-operated mice. In particular, MouseMove resolved a ~3-fold reduction in mean speed (data not shown), a ~3-fold reduction in total distance travelled (Fig. 4c) and a ~70-fold increase in sedentary behaviour (stop time fraction; Fig. 4d) in MCAo-operated mice, relative to sham-operated mice.
MouseMove vector analysis can be used to quantify laterality deficits in mice after experimental stroke
The unilateral brain damage characteristic of the MCAo model not only reduces general locomotor activity, but also produces laterality deficits such as circling14. Analysis of the OF behaviour using MouseMove clearly quantified this altered laterality, with MCAo-operated mice exhibiting a marked increase in turning bias (Fig. 5a,b) and tighter circling (Fig. 5c,d), relative to sham-operated mice. Thus, MouseMove provides a detailed quantification of altered OF behaviours following experimental stroke in mice.
MouseMove’s region-of-interest (ROI) analysis can be used to quantify episodic recognition memory
The OF test can also be used to measure anxiety whereby increased fractional time spent close to the walls indicates increased anxiety1. Alternatively, apparatus (e.g. objects, cues, stimuli, mazes) can be placed into the OF to allow cognitive tests to be performed. In both these instances, movement needs to be analysed within defined sub-regions of the OF. Accordingly, we added a ROI function (see ROI tab in MouseMove.exe) to expand the utility of MouseMove and allow the quantification of certain cognitive assays.
To use the ROI function, videos are captured and handled in the same fashion as for the OF test. Once the video parameters and input files have been loaded into MouseMove’s GUI, one needs to click on the ‘ROI’ tab of the GUI and stipulate the centre and radius (in pixels) of each ROI. Up to 4 circular ROIs can be measured simultaneously. The fractional time spent within each ROI (i.e. ‘ROI fractions’) is then automatically measured and the results added to the saveable text file (Fig. 2i).
To exemplify this ROI functionality, we modified the OF to perform the NOR test (see Methods for details). The NOR test is widely used to assess episodic memory18. It involves habituating a mouse in an OF containing two identical objects, then replacing one of the identical objects with a novel object (Fig. 6a,b). The time spent exploring the novel object, relative to the familiar object, is a gauge of episodic recognition memory18. As shown in Fig. 6c–e, the increased tendency of mice to explore the novel object was easily detectable using the ROI function of MouseMove. Based on these findings, MouseMove should not only enable semi-automated quantitative OF testing, but also allow digital analysis of cognitive tests such as the NOR.
The OF test was first described by Hall and Ballachey in 193219. Today, the OF test is the canonical assay for comparative assessment of changes in locomotor activity. Here we demonstrate MouseMove to be an alternative, publicly available means of analysing the OF test in a semi-automated fashion. MouseMove has two downloadable components: an ImageJ macro and a separate program with a custom-built GUI. MouseMove utilises the pre-existing plugin, MTrack216, to robustly track object movement. The x,y coordinates output file of the MTrack2 plugin is then fed into MouseMove’s GUI for quantitation of movement parameters including distance travelled, speed mean/S.E.M, fractional time spent stationary and indices of laterality (number of left turns, number of right turns, ratio of left:right turns [LRratio], turning offset and curvature). Lastly, MouseMove provides a visual overview of the cumulative tracking and graphical overview of distance travelled and speed distribution (Fig. 2h).
There are several important caveats with MouseMove when compared to the commercial OF analytical systems. For instance, whereas commercial systems offer an integrated package with an OF, movement recorder and analytic software, MouseMove users will be required to build their own OF, mount a video camera, install the ImageJ program and download our pre-processing macro and MouseMove .exe file. Building your own video-monitored OF, however, is straightforward and can be as simple as placing a ~0.4 m high circular wall on an appropriately coloured floor with an overhead webcam (Fig. 1). In addition, whilst MouseMove measures many of the same locomotion parameters as the ANY-MAZE and other commercial systems, it does not analyse higher-order events such as rearing or defecation and is incapable of distinguishing the rodent’s head from its tail.
In spite of these limitations, MouseMove offers numerous advantages to researchers who do not have access to a commercial OF analytical system. First, the script of MouseMove is publicly available and can therefore be customised. Once an OF is built, we show here that the MouseMove-based protocol can be used to provide accurate OF data in a semi-automated fashion, without the need for advanced equipment or specialist training. Second, the time taken for MouseMove to process and analyse video footage is relatively short compared to the time needed to perform these tasks manually (typically 10 min versus 3 h per OF test, respectively). MouseMove has undergone extensive in-house testing and (from March 2014-April 2015) has been used to quantify the locomotion of >150 mice (using high-throughput batch analysis; data not shown) across two different OFs in different research facilities. Third, we show that the ROI function expands the utility of MouseMove and allows analysis of OF-related cognitive tests such as the NOR test. Finally, while the studies described here have utilised MouseMove to analyse altered OF behaviours following experimental stroke in mice, this program could equally be suitable for the measurement of altered locomotion in other rodent models of brain injury/stimulation.
In conclusion, MouseMove is an open source, semi-automated and customisable means of performing the OF test. Accordingly, it should broaden usage of, not only the well characterised and popular OF test, but also other cognitive assays such as the NOR test.
Webcams used were the QuickCam E3560 or a HD Webcam C615 (Logitech; Lausanne, Switzerland). Videos were converted using Weeny Free Video Converter 2 version 2.1 (www.weenysoft.com). The video pre-processing utilised ImageJ 1.50a (National Institutes of Health, USA) and the MTrack2 plugin16 (designed by Nico Stuurman, Vale laboratory, University of California, CA, USA).
All animal procedures and methods were performed in accordance with the guidelines of the National Health and Medical Research Council Code of Practice for the Care and the Use of Animals for Experimental Purposes in Australia. All animal procedures and methods for this study were approved by the institutional Animal Ethics Committee (AEC), either AMREP AEC or Monash Animal Research Platform AEC. Experiments used adult male C57Bl/6 mice (aged 8–12 weeks). Mice were maintained under a 12 hour light/dark cycle with ad libitum access to food and water.
Open Field (OF) Test
The OF test was performed according to the guidelines of Gould and colleagues1. In brief, OF testing was done in a quiet (~60 decibel) and dimly lit (~27 lux) room. Two OFs were designed to test MouseMove. The first OF (Fig. 1d) was used for the MCAo cohort (Figs 4 and 5) and featured a white melamine circular floor (0.79 m in diameter, Fig. 1a) and a black corrugated plastic wall (0.4 m in height, Fig. 1c). To minimize spatial cues, the OF was surrounded by a white opaque polyester curtain suspended from a bicycle wheel which, in turn, was suspended on top of semi-rigid fibreglass tent poles (Fig. 1b,c). A HD C615 webcam was fixed to the hub of the wheel ~1 m above the OF and connected via USB cable to a computer. The second OF (Fig. 1e) was used for mechanical calibration (Fig. 3) and for NOR testing (Fig. 6) and featured a white melamine circular floor (0.9 m in diameter, Fig. 1a), a black corrugated plastic wall (0.4 m in height, Fig. 1c) and was surrounded by a white opaque polyester curtain suspended from a rail affixed to the wall. A QuickCam E3560 webcam was fixed to the rail ~1.5 m above the centre of the OF and connected via USB cable to a computer (Fig. 1b,c). The OF was wiped with 70% (v/v) ethanol before each test to minimise olfactory cues. For testing, a mouse was placed in the centre of the OF and its movement recorded for 15 min. The mouse was then removed from the OF and a ~10 s video of the empty arena was captured. Note, we recommend that future users build an OF with similar dimensions and mount their video camera at a similar position as that shown in Fig. 1; this is because, whilst our software offers good flexibility in terms of arena size/camera placement, extreme departure (e.g. >2-fold) from our OF dimensions will require a compensatory change to be made to the Preprocessing.ijm and MouseMove.exe settings.
Middle Cerebral Artery occlusion (MCAo) model of ischaemic stroke
The MCAo model was performed as described previously20. Mice underwent sham surgery or 1 h occlusion of the middle cerebral artery followed by 23 h of reperfusion and then OF testing.
Novel Object Recognition (NOR) test
The NOR test was performed according to the guidelines of Leger et al.18 with minor modifications. In brief, four different laminated A4-sized pictures were equally spaced around the walls of the OF to facilitate spatial orientation (Fig. 6a). Two identical 225 ml tissue culture flasks (160 mm high, 90 mm wide, 38 mm deep) were filled with sucrose, parafilm-sealed then placed at opposite ends of the OF (~15 cm from the wall; Fig. 6a). A mouse was then allowed to explore the OF for 15 min whilst being video recorded (referred to as the ‘familiarisation’ session). 20 h later, one of the tissue culture flasks was replaced with a tower of lego pieces (tower was 170 mm high, 63 mm wide, 63 mm deep) and the same mouse was allowed to explore the OF for 15 min whilst being video recorded (referred to as the ‘test’ session). Note, after both familiarization and test sessions a ~10 s video of the empty arena was also captured.
Video capturing, conversion and pre-processing
Videos are acquired at a spatial resolution of 640 × 480 pixels per frame (1~4 mm per pixel depending upon OF configuration) and a temporal resolution of 25 frames per second. Videos are then converted into MJPEG-compressed .avi files at full spatial and temporal resolution using Weeny Free Video Converter 2. The preprocessing macro (Preprocessing.ijm downloadable as Supplementary File 1) is then launched and the folder containing the converted .avi files is selected. Our pre-processing macro then spatially bins the videos into 320 × 240 before performing object segmentation/tracking whereby the ‘background video’ is subtracted from the ‘experiment video’. The subtracted video is then thresholded using the ImageJ’s ‘Minimum’ algorithm. To perform anti-aliasing, we applied ImageJ’s ‘erode’ and ‘dilate’ filters to the thresholded image. In our experience, anti-aliasing reduces artefacts (e.g. faeces) and is necessary for robust object segmentation/tracking. Object segmentation/tracking is then performed by feeding the anti-aliased video into the MTrack2 plugin. The output file generated by the MTrack2 plugin is then fed into MouseMove’s GUI for quantitation of movement parameters. Note, we recommend that future users capture/convert video footage with the same temporal and spatial resolution, because significant departure (e.g. >2-fold) from these video parameters will require a compensatory change to be made to the Preprocessing.ijm.
MouseMove GUI design and algorithms
LabVIEW 12.0 Development System (National instruments, TX, USA) was used to build MouseMove.exe. MouseMove contains a ‘file import function’ which allows reading of the trajectory data file generated by our ImageJ macro and a ‘file export function’ for saving of the analysis results into a comma separated values text file. By default, MouseMove downsamples the tracking coordinates by a factor of 10 (i.e. effectively adjusting the tracking to 2.5 frames per second). The downsampled tracking coordinates are then used for analysis. To simplify analyses, it is assumed that mice only move in the forward direction (supported by our batch analysis of >150 mice where ~90% of movement occurs in the forward direction; data not shown).
For trajectory analyses: Let n be the total number of data points for the pre-processed trajectory. At i-th point (ti, xi, yi) from the pre-processed data, the distance increment is defined by Equation #1: . If Δdi = 0, ‘stop’ status was assigned to this time point. Stop time fraction was then determined by normalizing ‘stop’ time points over the n. The first and second time derivatives of the displacement at each point were calculated using the 2nd order central discrete differentiation method with a window of three consecutive coordinates. For example, for i = 0, 1, 2, …, n – 1, . x−1 is the first element in initial condition and xn is the first element in final condition. The instantaneous speed is given by Equation #2: .
For region-of-interest analyses: The ‘ROI fraction’ calculated by MouseMove calculates the fractional time spent within each ROI. In other words, a ‘ROI1_fraction’ of 0.3 indicates that the tracked object spent 30% of its time within ROI 1. Note, each ROI is circular in shape and is defined by its centre and radius (coordinates which are manually entered into MouseMove’s ROI GUI).
For laterality analyses: A sliding window of 3 frames is used for all laterality measures. Within each sliding window, the vector across frames #2–3 is expressed relative to the vector across frames #1–2. The directionality of the mouse movement at i-th point is determined by the angle of the vector in Equation #3: . Thus, Equation #4: tells which direction the mouse will move in. Assuming a forward moving mouse cannot instantaneously turn over 90 degree, the decision rule of the directionality is: forward left (0 < Δθi < π/2, Fig. 5a, left), forward right (−π/2 < Δθi < 0, Fig. 5a, right), forward straight (Δθi = 0) and backward (|Δθi|≥π/2). For each trajectory, the ratio of the left- against right-oriented time fractions (LRatio) was calculated (Fig. 5b, left y-axis) and |1- LRatio| is regarded as a further indication of movement laterality (Fig. 5b, right y-axis). To quantitate curvature radius at each point of the trajectory (Fig. 5c,d) we used Equation #5:
Instruction for operating MouseMove
A computer with a Microsoft Windows operating system.
ImageJ 1.50a (Fiji) ; can be downloaded from http://fiji.sc/Downloads
Preprocessing.ijm can be downloaded via the link for Supplementary file 1.
MouseMove.exe can be installed after downloading via the link for Supplementary file 2. Users may be prompted to install LabVIEW if not already installed on their computer.
Create a new folder which contains at least one experiment video file and one background video file (.avi file format with a spatial resolution of 640 × 480 and a temporal resolution of 25 frames per second). The same name for corresponding experiment and background videos should be used, but with the suffix ‘empty’ added to the background video file name. Note, multiple videos can also be placed in the same folder for batch analysis, however, the names of the corresponding experiment/background videos must be paired (e.g. experiment #1 filename = ‘MCAo mouse a.avi’, background #1 filename = ‘MCAo mouse a empty.avi’, experiment #2 filename = ‘MCAo mouse b.avi’ and background #1 filename = ‘MCAo mouse b empty.avi’).
Open the macro Preprocessing.ijm in ImageJ.
Click ‘Run’ and the interface will prompt you to identify where the video-containing folder is located. The macro will preprocess all videos in the folder and save the output trajectory data as ‘TkResults …txt’ files. Note: because of ImageJ’s memory restrictions, videos are segmented into 5000 frame lengths and therefore the output files are named by combining the original video name with the frame range (e.g. ‘TkResults_MCAo mouse a_1-5000.txt’).
Open the MouseMove.exe and click the yellow ‘folder open’ button to import one TkResults file. MouseMove will then automatically recognise and stitch together the other segments from the same experiment. After this, MouseMove automatically displays its analysis results.
To analyse different frame range, recalibrate OF spatial and temporal parameters, downsample the video and stipulate the centre and radius of an ROI (in the ROI tab) simply change these parameters in MouseMove’s GUI and click ‘Update’.
To start a new analysis of other preprocessed data files, simply click the yellow ‘open folder’ icon and import a new file-of-interest. The software will automatically update the results.
Click the ‘Save’ button to save the analysis result as a comma separated values text file (.csv) within the original video-containing folder.
Note, example ‘background’ and ‘experiment’ video files can be downloaded as Supplementary files 3 and 4, respectively and used to test the proper functioning of Preprocessing.ijm macro and MouseMove.exe.
Statistical analyses were performed using GraphPad Prism® 6.04 (GraphPad Software, Inc.). Results are expressed as mean ± s.e.m. For each cohort, the number of independent experiments and the statistical test employed is indicated in the respective legend. p < 0.05 was considered to be statistically significant.
How to cite this article: Samson, A. L. et al. MouseMove: an open source program for semi-automated analysis of movement and cognitive testing in rodents. Sci. Rep. 5, 16171; doi: 10.1038/srep16171 (2015).
Gould, T., Dao, D. & Kovacsics, C. InMood and Anxiety Related Phenotypes in Mice Vol. 42 Neuromethods (ed Todd D. Gould) Ch. 1, 1–20 (Humana Press, 2009).
Wali, B., Ishrat, T., Won, S., Stein, D. G. & Sayeed, I. Progesterone in experimental permanent stroke: a dose-response and therapeutic time-window study. Brain 137, 486–502, doi: 10.1093/brain/awt319 (2014).
O’Loinsigh, E. D., Boland, G., Kelly, J. P. & O’Boyle, K. M. Behavioural, hyperthermic and neurotoxic effects of 3,4-methylenedioxymethamphetamine analogues in the Wistar rat. Progress in neuro-psychopharmacology & biological psychiatry 25, 621–638 (2001).
Prut, L. & Belzung, C. The open field as a paradigm to measure the effects of drugs on anxiety-like behaviors: a review. European journal of pharmacology 463, 3–33 (2003).
Masur, J., Schutz, M. T. & Boerngen, R. Gender differences in open-field behavior as a function of age. Developmental psychobiology 13, 107–110, doi: 10.1002/dev.420130202 (1980).
Valentinuzzi, V. S. et al. Locomotor response to an open field during C57BL/6J active and inactive phases: differences dependent on conditions of illumination. Physiology & behavior 69, 269–275 (2000).
Crabbe, J. C., Wahlsten, D. & Dudek, B. C. Genetics of mouse behavior: interactions with laboratory environment. Science 284, 1670–1672 (1999).
Elliott, B. M. & Grunberg, N. E. Effects of social and physical enrichment on open field activity differ in male and female Sprague-Dawley rats. Behavioural brain research 165, 187–196, doi: 10.1016/j.bbr.2005.06.025 (2005).
Tort, A. B. et al. A simple webcam-based approach for the measurement of rodent locomotion and other behavioural parameters. J Neurosci Methods 157, 91–97, doi: 10.1016/j.jneumeth.2006.04.005 (2006).
Togasaki, D. M. et al. The Webcam system: a simple, automated, computer-based video system for quantitative measurement of movement in nonhuman primates. J Neurosci Methods 145, 159–166, doi: 10.1016/j.jneumeth.2004.12.010 (2005).
Ramazani, R. B., Krishnan, H. R., Bergeson, S. E. & Atkinson, N. S. Computer automated movement detection for the analysis of behavior. J Neurosci Methods 162, 171–179, doi: 10.1016/j.jneumeth.2007.01.005 (2007).
Lind, N. M., Vinther, M., Hemmingsen, R. P. & Hansen, A. K. Validation of a digital video tracking system for recording pig locomotor behaviour. J Neurosci Methods 143, 123–132, doi: 10.1016/j.jneumeth.2004.09.019 (2005).
Crispim Junior, C. F. et al. ETHOWATCHER: validation of a tool for behavioral and video-tracking analysis in laboratory animals. Comput Biol Med 42, 257–264, doi: 10.1016/j.compbiomed.2011.12.002 (2012).
Schaar, K. L., Brenneman, M. M. & Savitz, S. I. Functional assessments in the rodent stroke model. Exp Transl Stroke Med 2, 13, doi: 10.1186/2040-7378-2-13 (2010).
Balkaya, M., Krober, J. M., Rex, A. & Endres, M. Assessing post-stroke behavior in mouse models of focal ischemia. Journal of cerebral blood flow and metabolism: official journal of the International Society of Cerebral Blood Flow and Metabolism 33, 330–338, doi: 10.1038/jcbfm.2012.185 (2013).
Klopfenstein, D. R. & Vale, R. D. The lipid binding pleckstrin homology domain in UNC-104 kinesin is necessary for synaptic vesicle transport in Caenorhabditis elegans. Mol Biol Cell 15, 3729–3739, doi: 10.1091/mbc.E04-04-0326 (2004).
Woodruff, T. M. et al. Pathophysiology, treatment and animal and cellular models of human ischemic stroke. Molecular neurodegeneration 6, 11, doi: 10.1186/1750-1326-6-11 (2011).
Leger, M. et al. Object recognition test in mice. Nature protocols 8, 2531–2537, doi: 10.1038/nprot.2013.155 (2013).
Hall, C. & Ballachey, E. L. A study of the rat’s behavior in a field: a contribution to method in comparative psychology. University of California Publications in Psychology. 6, 1–12 (1932).
Kim, H. A. et al. Brain immune cell composition and functional outcome after cerebral ischemia: comparison of two mouse strains. Front Cell Neurosci 8, 365, doi: 10.3389/fncel.2014.00365 (2014).
This work was supported by a project grant from the National Health and Medical Research Council (NHMRC) of Australia (APP1044214—SMS). SPJ is a Senior Principal Research Fellow and CGS is a Senior Research Fellow of the NHMRC. We thank Mr Steve Cody (MMI, AMREP, Monash University, Australia) for kindly providing a webcam and for helpful discussions. We thank Mr Steven Clifford Tomkins for building the speed-controlled rotor.
The authors declare no competing financial interests.
About this article
Cite this article
Samson, A., Ju, L., Ah Kim, H. et al. MouseMove: an open source program for semi-automated analysis of movement and cognitive testing in rodents. Sci Rep 5, 16171 (2015). https://doi.org/10.1038/srep16171
Multimedia Tools and Applications (2022)
Establishment of open-source semi-automated behavioral analysis system and quantification of the difference of sexual motivation between laboratory and wild strains
Scientific Reports (2021)
Lab Animal (2021)
A Walnut Diet in Combination with Enriched Environment Improves Cognitive Function and Affects Lipid Metabolites in Brain and Liver of Aged NMRI Mice
NeuroMolecular Medicine (2021)
Behavioral Ecology and Sociobiology (2021)