Deterministic Creation of Macroscopic Cat States

Despite current technological advances, observing quantum mechanical effects outside of the nanoscopic realm is extremely challenging. For this reason, the observation of such effects on larger scale systems is currently one of the most attractive goals in quantum science. Many experimental protocols have been proposed for both the creation and observation of quantum states on macroscopic scales, in particular, in the field of optomechanics. The majority of these proposals, however, rely on performing measurements, making them probabilistic. In this work we develop a completely deterministic method of macroscopic quantum state creation. We study the prototypical optomechanical Membrane In The Middle model and show that by controlling the membrane’s opacity, and through careful choice of the optical cavity initial state, we can deterministically create and grow the spatial extent of the membrane’s position into a large cat state. It is found that by using a Bose-Einstein condensate as a membrane high fidelity cat states with spatial separations of up to ∼300 nm can be achieved.

Despite current technological advances, observing quantum mechanical effects outside of the nanoscopic realm is extremely challenging. For this reason, the observation of such effects on larger scale systems is currently one of the most attractive goals in quantum science. Many experimental protocols have been proposed for both the creation and observation of quantum states on macroscopic scales, in particular, in the field of optomechanics. The majority of these proposals, however, rely on performing measurements, making them probabilistic. In this work we develop a completely deterministic method of macroscopic quantum state creation. We study the prototypical optomechanical Membrane In The Middle model and show that by controlling the membrane's opacity, and through careful choice of the optical cavity initial state, we can deterministically create and grow the spatial extent of the membrane's position into a large cat state. It is found that by using a Bose-Einstein condensate as a membrane high fidelity cat states with spatial separations of up to ∼300 nm can be achieved.
Observation of quantum mechanical effects on large scale systems has been intensively pursued since the development of quantum mechanics. This is because such observations would demonstrate the existence of quantum mechanical states which reside at the borders of the classical and quantum worlds. The creation of such 'macroscopic' quantum states has been a long sought after goal in quantum mechanics allowing not only for the direct study of quantum state collapse models 1 but for their extension to potentially practical applications in quantum information, quantum metrology and quantum simulation 2-7 . Many approaches have been made to observe quantum mechanical effects on larger scales. In particular, extensive efforts have been direct towards up-scaling the well-known two-slit experiment in hope to observe wave like behaviour of objects much larger than electrons. To date, wave like behaviour has been reported with the use of particles ranging from single atoms all the way to organic molecules containing several hundreds of atoms [8][9][10] . The creation of quantum superpositions and entangled states of trapped macroscopic objects is also widely sought after. Of particular interest is the creation of states which are analogous to the famous Schrödinger's cat state due to both their simplicity and their completely quantum mechanical nature. In quantum optics photonic forms of the Schrödinger's cat state are also studied. These states are commonly referred to as 'cat states' and often correspond to superpositions between two near-orthogonal coherent states of the electromagnetic fields in cavities. Both Schrödinger and superposition cat states have been observed by either entangling the internal state of an atom with its position 11 , or with a coherent light field before performing a measurement 12 . However, the largest of these corresponds to an entangled spatial superposition of a single ion where the spatial displacement between the two ion positions was 83 nm 11 . More recent are proposals for matter-wave interferometery by a falling nanoparticle 13 , experimental demonstration of matter-wave interference for high-mass molecules 14 , and proposals for space-born macroscopic quantum resonators for testing quantum mechanics 15 . Many of these proposals/experiments produce a quantum state whose spatial superposition is entangled (correlated), with other ancillary degrees of freedom (e.g. internal spin states), and thus have a number of drawbacks. Firstly they suffer greater amounts of decoherence through coupling to other types of noise via these ancillary degrees of freedom and if one wishes to perform coherent experiments (e.g. interferometry), with entangled cats one must control both the spatial and ancillary degrees of freedom

Results
The Membrane in the Middle Model. Our goal is to discover a deterministic protocol for the creation of a cat state of a mechanical object's position. As mentioned above one approach which has been previously studied involves the introduction of mechanical oscillators into Fabry-Pérot type cavities (MITM). Here a similar approach will be used but now we also consider controlling the mechanical oscillator's opacity. We first describe the MITM model and the light-matter interactions. Next, the effects of controlling the opacity of the membrane will be studied where two extreme cases will be considered. These cases correspond to either a reflective or a highly transmissive membrane. Finally, it will be shown that by alternating between these two opacity states the spatial displacement of the membrane can be driven. Introduction to MITM. The Membrane in the Middle model describes an optomechanical system which is comprised from two degenerate modes of a cavity which interact with a physical membrane that is confined within the cavity, shown in Fig. 1. The Hamiltonian for this model can be split into four main portions. These include; Ĥ C 0 , describing the self energies of the cavity modes, Ĥ M 0 , that of the membrane's motion, Ĥ T , which describes the transmission of light through the membrane and Ĥ int the interaction energy. The self energy terms are given by, where â L /â R denote the annihilation operators of the left/right cavity modes with frequency ω ω ω = = L R and b that of the membrane's mechanical motion with frequency Ω . In what follows optical frequency modes will be focused on, for practical purposes. The transmission term describes the transfer of photons between the left/right cavity modes through the membrane. It can be described by, where J is the transmission rate of the membrane. Finally, we include the interaction term describing the photon pressure force of the cavity mode photons acting on the membrane. This interaction requires that the wavelength of the optical modes satisfies λ ,  l h c , where l/h represent the membrane's length/ height. The photon pressure force can be expressed as is the position operator of the membrane,  = ( / Ω) / x m 2 ZPF 1 2 the zero point fluctuation amplitude and L is the length of the individual cavities. The optomechanical interaction term is then expressed as, This Hamiltonian describes a driven harmonic oscillator where the driving strength is directly proportional to not only the optomechanical coupling rate but also to the difference in the photon numbers between the optical modes. In the case where Δ is treated as a classical number Eq. (6) corresponds to harmonic motion about a displaced position, which will be used to interpret later results. Under the evolution of , corresponding to the membrane initially in a coherent state β M and the left/right cavity modes in coherent states α L /α R , the expectation value of the membrane's position evolves as, . This expectation value shows that if the state of the left and right cavity modes could be completely interchanged at times satisfying π Ω = ( + ) t n 2 1 , the position of the membrane could be driven to even larger spatial extensions, see Fig. 2. The reason for this is that interchanging the state of the left and right modes effectively switches the phase on the interaction term in Eq. (6), that is, the phase on the driving term will be + and thus the membrane will be displaced by the same amount, but in the opposite direction. An alternative explanation can be made in the displaced harmonic oscillator picture to easily visualise the protocol described to increase the membrane's maximal displacement. The separate ± phases of the optomechanical driving term correspond to two separate quadratic potentials which are symmetrically displaced about the origin, as shown in Fig. 2. Carefully timing the optomechanical phase switching to occur when the membrane has reached a maximal displacement in one harmonic potential is analogous to shifting the membrane to the other, displaced, harmonic potential, where the potential energy is larger. If this process is repeated by switching the membrane between the two symmetrically displaced harmonic potentials its energy can sequentially be increased to achieve larger and larger spatial displacements, see Fig. 2. The interesting feature is that since the two harmonic potentials are identical the switching times are independent of the spatial extent of the membrane.
In order to drive the displacement of the membrane a method of interchanging the state of the left/ right cavities must next be established. As this typically requires the flow of photons through the membrane, the second limiting case of J will now be considered. That is, the case of an almost completely transparent membrane. In this case, as , Ω  J g 0 , the transmissive term in Eq. (5) dominates and the Hamiltonian approximately reduces to, By again working in the Heisenberg picture the cavity mode operators can be evolved to give, which shows that at times satisfying We plot the dynamics of the membrane under evolution of ( ) Fig. 3 in the case of an initial product state of the membrane and optical fields to clearly demonstrate the driving and flipping of the membrane's motion.
Now that a method of interchanging, or "flipping", the state of the two cavity modes has been established the membrane's displacement can be driven in the manner shown in Fig. 2. If the flipping process The sign denotes the phase on the optomechanical driving term. Here the system is initialised in 1 is satisfied, the membrane's maximal displacement will increase linearly with N F . Ignoring dissipative effects, the unitary evolution can be expressed by, for arbitrary integers n, m. Ideally we require m = n = 0 to reduce the evolution time and hence the effects of decoherence. Numerical simulations of this evolution will be performed in later sections where the effects of decoherence will be considered (see Section Numerical Simulation). This evolution will be the basis for both the creation and 'growth' of a cat state.
Generation of a Cat State. While a possible mechanism for 'growing' the spatial extent of the mechanical cat state has been proposed, the cat state must first be created. One of the most common approaches to creating cat states is to first establish entanglement in the system. Once an entangled state is created there are many protocols which can be used to reduce the entangled state into a cat state. However, the majority of these protocols require that measurements are made on the system, projecting it into the cat state. This means that each of these protocols are probabilistic. In this section a similar approach to cat state creation will be made. We will first focus on establishing entanglement between the membrane's position and the two cavity modes. This entanglement will be produced by preparing the system in specific initial states then evolving it in the manner discussed above. Several possible initial states will be considered with the intention of maximising the extent of the spatial displacement of the membrane's position. The second half of this section will focus on disentangling the membrane from the two cavity modes to produce the desired cat state. Here, several possible disentanglement protocols which do not rely on measurement will be discussed with the use of the MITM model alone. Finally, an ensemble of atoms will be introduced into the MITM system to show that a completely deterministic and experimentally feasible disentanglement protocol is possible. Initial Conditions. As mentioned above, a common approach to cat state creation is to first establish entanglement. This means that a set of initial conditions must be determined which, when evolved under Eq. (11), leave the system in an entangled state that can be reduced into a cat state. In the proposed system this requires the generation of quantum entanglement between the membrane's position and cavity modes. One possible approach to achieving this entanglement is to initialise the system in a state that corresponds to the membrane in its ground state while the cavity modes are in a NOON state 28 . In the MITM system the NOON state corresponds to a quantum superposition of the left cavity containing N photons while the right is empty and the right cavity containing N photons while the left is empty. The initial state can be expressed as, By evolving this state through the use of Eq. (11) the membrane's position is simultaneously evolved under the two potentials depicted in Fig. 2. After such an evolution the state of the system is, where C is a normalisation constant and β M represents the coherent state amplitude of the membrane which depends on the number of 'flips' which have been applied as well as the number of photons in the NOON state, N. Typically NOON states are experimentally difficult to create for N > 2. From Eq. (7), it is clear that a large N is required to achieve large spatial displacements of the membrane. This means that, unless an ultra-small membrane is considered, an alternative set of experimentally feasible initial conditions is required. There are two possible alternatives to initialising the cavities in a NOON state. These include (A) the coherent state analogue of the NOON state, referred to as an entangled coherent state (EC) and (B) the entangled squeezed-coherent state (ESC) 29,30 . For possibility (A): an EC can be produced in the proposed setup by initialising the left cavity in a coherent superposition state (CSS) and the right cavity in a coherent state then evolving the system in the highly transmissive regime, Eq. (8) 29 . Evolution under Eq.
c c c c 2 1 2 1 2 for arbitrary input modes ĉ 1 and ĉ 2 . While this provides a coherent state analogue of the NOON state, the creation of EC states relies directly on the generation of ψ CSS . Such coherent superposition states have only been demonstrated experimentally with small coherent amplitudes, α < .
3 5 2 , thus EC initial states with large coherent amplitudes may be beyond current experimental capabilities 12,31 .
For possibility (B): Entangled squeezed coherent states can also be generated using the proposed setup, Fig. 1. An ESC state can be created by preparing the left mode in a squeezed state and the right mode in a coherent state then evolving the system in the highly transmissive regime, Eq. (8). Both squeezed vacuum states and squeezed single photon states, corresponding to initialisation with a parametrically down converted photon, have been used to demonstrate the creation of such entangled states 32,33 . The resulting state can be expressed by, The appeal of ESC states is that they strongly resemble high N NOON states where there is essentially no limit on the size of N. The largest ESC states which have been created correspond to high NOON states with N ≤ 9 34 . Thus, although they outperform EC states, ESC states are still far from the  N 1 NOON-like states that are needed to displace large membranes. This means that realistically only very light membranes can be considered in our proposed cat state creation protocol.

Disentanglement.
As discussed in the previous section, to produce the desired cat state entanglement must first be established between the membrane's position and the cavity modes. This entanglement can be achieved by initialising the system in the state Eq. (12) and performing the evolution described by Eq. (11). However, this evolution leaves the system in the state, Eq. (13), where the membrane's reduced position is in a completely mixed state. To convert Eq. (13) into a pure cat state of the membrane's position the membrane must be disentangled from the two cavity modes.
Disentangling is typically is a very difficult task. It is sometimes possible to find a unitary operation that will deterministically disentangle systems but such operations require the application of conditional quantum gates and these are typically extremely hard to implement physically. Rather than attempt unitary disentanglement many protocols implement probabilistic measurement based methods for disentanglement. In what follows we initially explore a naive approach to disentangle the photonic and motional systems by letting the photons escape from the optical cavities. This method fails for the reasons we outline below. We then discuss a unitary operation which achieves deterministic disentanglement by allowing the membrane's reflectivity to change depending on the membrane's displacement. Although formally this approach works there are currently no experiments capable of controlling transparency over pico-nano meter scales. Guided by this we note that methods to unitarily disentangle discrete (e.g. spin), systems are physically more tractable and we suggest introducing a cold atomic gas comprised of three level atomic systems and describe a protocol which converts the membrane-optical mode entanglement into membrane-atomic excitation entanglement. Once in the latter form we are then able to more easily perform the necessary conditional operations on the atomic-membrane system to unitarily disentangle them. The resulting protocol is complex but shows that deterministic unitary disentanglement is possible.
As mentioned above, a naive approach to disentangle the state Eq. (13) involves simply allowing the N cavity photons to decay from both cavities, potentially evolving the system into the disentangled state . This approach, however, is flawed as, in fact, the final state of the membrane is a mixed state due to the non-unitary evolution associated with the photon loss.
A second approach is a completely unitary, deterministic, method to disentangle the membrane's position from the cavity photons. To achieve this we must posit the ability to conditionally flip the state of the cavity modes, depending on the membrane's position. That is, performing the transformation, are position projection operators onto the positive/negative membrane position axes. While this approach has the potential to deterministically disentangle the state, it essentially requires that the transmission rate of the membrane is also position dependent, J(t, x), which is extremely experimentally challenging for pico to nano-metre displacements of the membrane. If such control over the membrane's transmission rate were possible our disentanglement discussion would end here.
As the two disentanglement methods discussed above either fail or are currently infeasible an alternative disentanglement protocol for Eq. (13) must now be established. As mentioned above, we proceed by transferring the excitations held in the photonic subsystem to a new discrete atomic ensemble subsystem containing M > N three-level atomic atoms . We achieve this transfer via tagging the photons in the two optical cavities in the MITM system via separate polarizations and using this polarization degree of freedom to excite polarization dependent transitions in the atomic ensemble. Once encoded into the atomic ensemble we describe a relatively simple method to perform the disentanglement we seek by manipulating the internal states of the atomic ensemble. The entanglement transfer can be achieved if the light in the left/right cavities is left/right hand (σ L /σ R ) circularly polarised. By quickly introducing an ensemble of M 3-level atoms into the system the photons in the left/right cavity modes are separately absorbed into the m s = ± 1 excited states of the atoms. This process simultaneously removes the photons from both cavities while encoding the state of each cavity into the internal excited states of the ensemble of atoms, see Fig. 4. To explore the mapping of the entanglement to the atomic ensemble the case of a single 3-level atom interacting with the σ L /σ R polarised photons can be considered. In this case the interaction is described by the Hamiltonian, where the detuning has been set to zero and σ σ /   to avoid the effects of the changing photon pressure force on the membrane. If this condition is not met, the amplitude of the membrane's oscillation will decrease due to the decreasing number of photons in the cavity. It is also important to note here that if the cavity is initialised in an EC state, to maintain determinism, this transfer of entanglement requires that α > M 2 .
The membrane-atom entangled state, Eq. (21), can now be disentangled by applying a π pulse of linearly polarised light to the atoms. As linearly polarised light is comprised of both left and right hand circularly polarised light, application of a π pulse will simultaneously send the N m s = ± 1 state atoms to the ground state. The remaining M − N atoms will be excited into the m s = 0 optically excited state. After application of this pulse Eq. (21) reduces to,

Schematic of Experimental Realisation.
In the previous sections it was shown that, in theory, a cat state of the membrane's position can be deterministically created by controlling the membrane's transmission rate and selectively introducing M atoms into the system. This section will focus on illustrating the cat state creation protocol with a schematic of an optically based experiment capable of both achieving the same effective optical dynamics as modulating the transmission rate of the membrane and the introduction of an ensemble of atoms.
The first task in our cat growth protocol we address is to alter the membrane's transparency with time. When the membrane is transparent the optical fields in the two MITM cavities interchange (flip) and this flipping is an essential component in our protocol. Controling the membrane transparency in time is experimentally challenging and so we propose an alternative method to interchange the optical fields between the two Fabry-Pérot (FP) optical cavities in the MITM setup. We will show that one can effectively rapidly switch between two setups: (A) the membrane located in a Fabry-Pérot cavity (traditional MITM), and (B) the membrane located in a ring cavity that envelops the Fabry-Pérot arrangement in (A) . By switching the setup into (B) for a short duration and then back to (A) we can effectively provide an optical route to interchange the optical fields in setup (A) without having to control the membrane's transparency.
The second task, that of quickly inserting an atomic ensemble and allowing interaction between the ensemble and photons from both FP cavities in setup (A), is again achieved through switching the setup into a ring cavity which now contains the atomic ensemble.
Both of the above tasks are implemented via polarization control of the optical paths taken by the photons which we now describe in more detail. The schematic experiment achieves the first task, interchanging the optical consists of a multi-cavity system where each cavity is distinguished by the polarisation of the light in the system, shown in Fig. 5. Each of the cavities are separated through the use of appropriately positioned beam displacers and alternated between by the activation of Electro-optic quarter wave plates (EOP). For vertically polarised light, the cavity resembles that of a Fabry-Pérot cavity where the membrane is positioned in the center. The Fabry-Pérot cavity is shown in Fig. 5 by red and blue lines, each corresponding to the left/right cavities. This means that if the light in the system is vertically polarised and the natural transmission rate of the membrane satisfies , Ω  g J 0 the system can be approximately described by Eq. (6). If the light is horizontally polarised the system corresponds to a Ring cavity containing the membrane, shown as green in Fig. 5. In this case the effective transmission rate of the membrane drastically increases as the light can freely travel between the left/right cavities and hence the system can be approximately described by the highly transmissive Hamiltonian, Eq. (8). The evolution described by Eq. (11), which is required to drive the displacement of the membrane, could be realised by alternating between these two cavities through the activation of the EOPs A and B in Fig. 5. Introduction of many atoms into the system could be achieved by introducing a third cavity using a similar technique as above. At the end of the evolution, Eq. (11), the system remains in the highly reflective regime. If at this time the EOPs C and D in Fig. 5 are activated the system will again resemble a Ring cavity, but one which contains M atoms as well as the membrane. Provided that the atoms are each prepared in the optical ground state, Δ m s = ± 1 transitions will be excited as the light of each mode is left/right hand polarised by two separate quarter wave plates, entangling the membrane with the atomic states.
Scientific RepoRts | 5:13884 | DOi: 10.1038/srep13884 To create a cat state with the suggested experiment a specific operational protocol must be followed.
Once the system has been initialised in the state Eq. (12) with M ground state atoms the experiment starts with an evolution in the highly reflective regime for time t 1 . This evolution corresponds to driving the membrane to the maximal possible displacement in the initial potential well. We predict the time at which this maximal displacement will occur. Then, at this predicted time, we switch the system into the effective transparent membrane setup to begin the dynamics that will interchange the optical fields in the cavities. At no instant are we allowed to perform any measurement of the membrane's position or cavity field as such a measurement will cause a collapse of the cat state superposition we wish to achieve. To switch the system into the transparent membrane regime the EOPs A and B in Fig. 5 are activated.
Evolution in this regime for time t 2 will flip the state of the cavity modes, which corresponds to displacing the harmonic potential. As it was shown that after time t 2 the occupation of the cavity modes will be completely interchanged, see Eq. (9). Deactivating these EOPs will then switch the system back into the high opacity regime but under a displaced harmonic potential, increasing the potential energy of the membrane. By evolving again in this regime for time t 1 , the membrane's maximal displacement will increase in accordance with Eq. (7). This process can be repeated until the desired spatial displacement is acquired. Once the desired displacement is achieved the system will reside in the high opacity regime in the entangled state, Eq. (13). In order to create a cat state, the membrane must now be disentangled from the cavity modes. By activating EOPs C and D in Fig. 5, M atoms can be introduced into the system. Evolving this combined system for time t 3 will transfer the entanglement between the membrane and the cavity modes to the atoms, as shown in Eq. (21). Finally, by application of a linearly polarised π pulse to the atomic ensemble, a cat state of the membrane's position can be produced.
As optical transitions are considered in the schematic experiment, application of a π pulse to the ensemble of 3-level atoms to disentangle the system is quite difficult experimentally. This difficulty stems from the short lifetimes of the optically excited states, in turn, making the disentanglement process experimentally challenging. However, the optically excited states of the 3-level atoms can be bypassed through the use of a Raman transition. To do so, we must consider atoms with triplet optical ground and excited states. Such atoms can be directly excited into the m s = ± 1 levels of the optical ground state by detuning the left/right optical cavity modes from the atomic transition and introducing a similarly detuned coherent field, depicted in Fig. 6. This is beneficial as these levels of the optical ground state are significantly longer lived, allowing for a more practical implementation of the π pulse to the atomic ensemble. Bypassing the optically excited state requires that both the left/right optical cavity modes and In the case of a single 3-level atom and a single, left hand circularly polarised optical mode, shown in the left half of Fig. 6, the interaction picture Hamiltonian of the system before time-averaging is, An identical Hamiltonian can also be written to describe a right hand circularly polarised optical mode, corresponding to the Δ = − m 1 s transition, depicted in the right half of Fig. 6. Through the use of Eq. (24) the effective Hamiltonian for a single atom system coupling to both left and right hand circularly polarised optical modes is = + with ±  g denoting the coupling rate associated with the transition between the virtual m s = ± 1 levels of the optical excited state and m s = ± 1 levels of the optical ground state, shown in Fig. 6. This Hamiltonian can be easily extended to account for M atoms. The discussed Raman transition optically encodes the cavity information into the optical ground triplet states of the atoms. The atomic ensemble can then be disentangled from the membrane's position by application of a microwave π pulse.
Numerical Simulations. Both the theory and a possible experimental realisation of the cat state creation protocol have now been described. Simulations of the proposed protocol can now be performed to determine the quality and size of the resulting cat states. In this section numerical simulations of the membrane's dynamics with the consideration of dissipative effects will first be performed to show that large displacements of the membrane can be achieved. Throughout the simulations a BEC consisting of ~10 5 Rubidium-87 atoms will be used due to its small mass and its compatibility with the MITM model 18 . The two cavity modes will then be initialised in a NOON state, Eq. (12), to show that, after evolution and application of the disentanglement protocol, a cat state can be created.
The dynamics of the system can be simulated by solving the full master equation, where the time dependence in the Hamiltonian describes the alternation between the two different opacity regimes, Eq. (6) and Eq. (8). Here the parameters κ c and γ M denote the cavity and mechanical Figure 6. Depiction of the Raman transition which can be applied to the 3-level atomic system to excited the magnetic levels of the optical ground state, ±1 g , rather than those of the optically excited state, ±1 e . The interaction strength for each transition is denoted by the respective g.
damping rates respectively. Before continuing, it will be assumed that the mechanical damping rate, γ M , is negligible with respect to the optical damping rate during the time scales that will be considered, γ κ  M c 19 . The above master equation was solved using MATLAB's Quantum Optics Toolbox (QOT). The alternation between the reflective/transparent regimes can be simulated by performing successive simulations under each regime. We explored the accuracy of our numerics using various indicators. Both Trρ and the traces of the reduced systems were unity to within the absolute and relative error (10 −8 ), of the integrator in QOT. A more important source of numerical error arises from truncating the Hilbert spaces of the cavities and membranes. Analytically each of these are infinite dimensional but in the numerical simulation we truncate the individual cavity Hilbert spaces to n ≤ 4, while the membrane's Hilbert space is truncated to n ≤ N trunc . The cavity Hilbert space truncation is found to be adequate while in Fig. 7 7), can be clearly observed in Fig. 8 where the mechanical frequency was set to π Ω = × .  , during the time evolution of the protocol. We must choose N trunc large enough to avoid significant population in this element and find that we must have N tunc ~ 40.  19 . For ideal results, F > 80%, the ratio between the mechanical trap frequency of the BEC and the cavity loss rate must be increased by a factor of 20 where the cat state survives all three cavity state flips.

Discussion
In this work a quantum system designed for the deterministic creation of macroscopic quantum states is proposed. The system consists of a BEC type membrane which is placed inside a Fabry-Pérot type optical cavity. It is shown that by controlling the opacity of the BEC its displacement from the origin can be driven at a rate proportional to the number of photons in the system. This result was then used to produce and essentially grow the spatial extent of a cat state of the BEC's position. This required the initialisation of the two cavities in a NOON like optical state, which was shown generates entanglement between the membrane's position and the cavity modes after the system is evolved. To reduce this entangled state to a cat state a deterministic disentanglement procedure was proposed which involved the transfer of the entanglement to an ensemble of atoms. The cat state creation protocol was then illustrated using a schematic of an experimental platform which was capable of both effectively flipping the cavity optical states and applying the deterministic disentanglement procedure.
Finally, several simulations were performed showing that large spatial displacements of the BEC could be achieved using only a small number of photons in the system. Simulations of cat state creation were also performed which showed that relatively high fidelity cat states could be produced if either slightly larger mechanical frequencies or slight smaller cavity loss rates than those achieved in previous experiments could be reached. Overall the proposed cat state creation protocol provided an experimentally feasible method of deterministically creating cat states significantly larger than the majority of previous proposals. Creation of such states are essential to further the understanding of quantum decoherence and have many potential applications in a wide range of quantum technologies.