Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

A Gigantic, Exceptionally Complete Titanosaurian Sauropod Dinosaur from Southern Patagonia, Argentina

Abstract

Titanosaurian sauropod dinosaurs were the most diverse and abundant large-bodied herbivores in the southern continents during the final 30 million years of the Mesozoic Era. Several titanosaur species are regarded as the most massive land-living animals yet discovered; nevertheless, nearly all of these giant titanosaurs are known only from very incomplete fossils, hindering a detailed understanding of their anatomy. Here we describe a new and gigantic titanosaur, Dreadnoughtus schrani, from Upper Cretaceous sediments in southern Patagonia, Argentina. Represented by approximately 70% of the postcranial skeleton, plus craniodental remains, Dreadnoughtus is the most complete giant titanosaur yet discovered and provides new insight into the morphology and evolutionary history of these colossal animals. Furthermore, despite its estimated mass of about 59.3 metric tons, the bone histology of the Dreadnoughtus type specimen reveals that this individual was still growing at the time of death.

Introduction

The sauropod dinosaur clade Titanosauria includes the most massive terrestrial animals yet discovered1,2. Nevertheless, with the exception of Futalognkosaurus—known from much of the vertebral column and pelvis3—all truly gigantic titanosaurs (sensu Sander et al.4; i.e., those with an adult body mass exceeding 40 metric tons) are represented by very fragmentary fossils5,6,7,8,9. The incomplete understanding of the anatomies of colossal titanosaurs has frustrated attempts to characterize important aspects of their evolutionary history and palaeobiology. For example, it is presently uncertain whether extreme gigantism evolved multiple times or only once within Titanosauria4. Furthermore, it is not even clear how large the largest titanosaurs were, with different studies yielding widely divergent estimates of body dimensions7,10,11,12,13.

Here we report a new and gigantic titanosaur from Upper Cretaceous (Campanian–Maastrichtian14,15; ~84–66 Ma16) rocks exposed in south-western Patagonia, Argentina (Supplementary Fig. 1), some 1,200 km from the best-known South American dinosaur localities, which occur in northern Patagonia17. Represented by all major skeletal regions (see Supplementary Information), Dreadnoughtus schrani nov. gen. nov. sp. (Figs. 1, 2, Supplementary Figs. 2–18) offers new insight into the skeletal anatomy, bone histology, phylogenetic relationships (Fig. 3, Supplementary Figs. 19, 20) and body shape and mass of an enormous titanosaur. Most bones are exquisitely preserved, with details such as muscle scars and other osteological correlates of soft-tissues clearly discernible.

Figure 1
figure1

Axial skeletal anatomy of the gigantic titanosaur Dreadnoughtus schrani.

Posterior (~9th) cervical vertebra in (A) left lateral, (B) right lateral, (C) posterior and (D) ventral views. (E) Anterior (~4th) dorsal vertebra in right lateral view. Middle (~6th) dorsal vertebra in (F) left lateral and (G) anterior views. (H) Posterior (~7th) dorsal vertebra in right lateral view. Posterior (~8th) dorsal vertebra in (I) left lateral and (J) posterior views. (K) Partial sacrum in ventral view. (L) Biconvex first caudal vertebra in posterior view. (M) First 32 caudal vertebrae and 18 haemal arches in left lateral view (positions of first 21 caudal vertebrae and haemal arches 4 to 18 known with certainty). All depicted elements definitively pertain to the holotype (MPM-PV 1156), with the possible exceptions of the dorsal vertebrae in (E) and (H) to (J), which belong to either the holotype or the paratype (MPM-PV 3546). Abbreviations: acpl, anterior centroparapophyseal lamina; apcdl, accessory posterior centrodiapophyseal lamina; a-spdl, anterior ramus of spinodiapophyseal lamina; cdf, centrodiapophyseal fossa; cpol, centropostzygapophyseal lamina; dp, diapophysis; nc, neural canal; ns, neural spine; pacdf, parapophyseal centrodiapophyseal fossa; pcdl, posterior centrodiapophyseal lamina; pcdl-f posterior centrodiapophyseal fossa, pcpl, posterior centroparapophyseal lamina; pe, paddle-shaped distal expansion; pocdf, postzygapophyseal centrodiapophyseal fossa; podl, postzygodiapophyseal lamina; posdf, postzygapophyseal spinodiapophyseal fossa; poz, postzygapophysis; pp, parapophysis; ppdl, paradiapophyseal lamina; prdl, prezygodiapophyseal lamina; prsdf, prezygapophyseal spinodiapophyseal fossa; prsl, prespinal lamina; prz, prezygapophysis; p-spdl, posterior ramus of spinodiapophyseal lamina; s6, sixth sacral vertebra; sdf, spinodiapophyseal fossa; spdl, spinodiapophyseal lamina; spof, spinopostzygapophyseal fossa; spol, spinopostzygapophyseal lamina; sprl, spinoprezygapophyseal lamina; sr, sacral rib; sy, sacricostal yoke; tp, transverse process; tpol, intrapostzygapophyseal lamina; tprl, intraprezygapophyseal lamina. Scale bars equal 50 cm.

Figure 2
figure2

Reconstruction, appendicular skeletal anatomy and bone histology of Dreadnoughtus schrani.

(A) Reconstructed skeleton and body silhouette in left lateral view with preserved elements in white. (B) Left scapula and coracoid in lateral view. (C) Sternal plates in ventral view. (D) Left forelimb (metacarpus reconstructed) in anterior view. (E) Left pelvis (ilium partially reconstructed) in lateral view. (F) Left hind limb in anterior view (metatarsus and pes partially reconstructed and reversed from right). (G) Transverse ground thin section of humeral shaft, showing heavy secondary remodelling (arrow indicates extent of dense osteon formation), a thick layer of well-vascularized fibrolamellar bone and a lack of lines of arrested growth or an external fundamental system. Abbreviations: acet, acetabulum; acf, acromial fossa; acp, acromial process; acr, acromial ridge; ast, astragalus; cc, cnemial crest; cof, coracoid foramen; cor, coracoid; dpc, deltopectoral crest; fem, femur; fhd, femoral head; fib, fibula; flb, fibrolamellar bone; gl, glenoid; hum, humerus; il, ilium; ilp, iliac peduncle; isc, ischium; isp, ischial peduncle; lt, lateral trochanter; mtI, metatarsal I; mtII, metatarsal II; of, obturator foramen; pop, postacetabular process; prp, preacetabular process; pu, pedal ungual; pub, pubis; pup, pubic peduncle; rac, radial condyle; rad, radius; sc, scapula; scb, scapular blade; sr, secondary remodelling; tib, tibia; tpp, tuberosity on preacetabular process; ul, ulna; ulc, ulnar condyle. Scale bars equal 1 m in (A) to (F) and 1 mm in (G). (Skeletal reconstruction by L. Wright, with G. Schultz.)

Figure 3
figure3

Time-calibrated hypothesis of phylogenetic relationships of Dreadnoughtus schrani (Consistency Index = 0.42, Retention Index = 0.76, Rescaled Consistency Index = 0.32) with relevant clades labelled.

Geologic timescale after Walker et al.16; stratigraphic ranges (indicated by thick black bars) for most taxa follow Wilson27, D'Emic20 and Mannion et al.30. In instances where these sources disagree on the age of a particular taxon, we follow the most recent source that includes that taxon. Additional age sources are as follows: Dreadnoughtus14,15; Epachthosaurus70; Futalognkosaurus17; Mendozasaurus62; Neuquensaurus17. Numbers beside nodes are Bremer decay indices. Abbreviations: Br, Brachiosauridae; Lo, Lognkosauria; Mya, million years ago. See Supplementary Fig. 20 for an unabridged version of this tree that presents the entire topology and also includes bootstrap and jack-knife support values.

Results

Systematic palaeontology

Dinosauria Owen 1842. Saurischia Seeley 1887. Sauropoda Marsh 1878. Titanosauriformes Salgado, Coria and Calvo 1997. Titanosauria Bonaparte and Coria 1993. Dreadnoughtus schrani nov. gen. nov. sp.

Etymology

Dreadnought (Old English), fearing nothing; genus name alludes to the gigantic body size of the taxon (which presumably rendered healthy adult individuals nearly impervious to attack) and the predominant battleships of the early 20th century (two of which, ARA [Armada de la República Argentina] Rivadavia and ARA Moreno, were part of the Argentinean navy). Species name honours the American entrepreneur Adam Schran for his support of this research. Holotype. MPM-PV 1156, a partially articulated partial skeleton that comprises a maxilla fragment, a tooth, a posterior cervical vertebra, cervical ribs, multiple dorsal vertebrae and ribs, the sacrum, 32 caudal vertebrae and 18 haemal arches (including an articulated sequence of 17 anterior and middle caudal vertebrae and their corresponding haemal arches), the left pectoral girdle and forelimb minus the manus, both sternal plates, all pelvic elements, the left hind limb lacking the pes and the right tibia, metatarsals I and II and pedal ungual I. Paratype. MPM-PV 3546, a partially articulated postcranial skeleton of a slightly smaller individual that includes a partial anterior cervical vertebra, multiple dorsal vertebrae and ribs, the sacrum, seven caudal vertebrae and five haemal arches, all pelvic elements and the left femur. The specimens are catalogued in the collection of the Museo Padre Molina (MPM; Río Gallegos, Argentina; see Supplementary Information for other institutional abbreviations). Type locality. Cerro Fortaleza, east bank of the Río La Leona, Santa Cruz Province, south-western Patagonia, Argentina (coordinates on file at MPM). Horizon. Cerro Fortaleza Formation, approximately 350 m below the top of the formation. Age. Late Cretaceous, Campanian–Maastrichtian, ~84–66 Ma.

Diagnosis

A gigantic titanosaurian sauropod diagnosed by the following autapomorphies (* = character observable in both known specimens): (1) first caudal centrum with axial ventral keel; (2) anterior caudal neural spines with extensively subdivided pneumatocoel between spinoprezygapophyseal and spinopostzygapophyseal laminae*; (3) anterior caudal neural spines with hypertrophied prespinal and postspinal laminae*; (4) middle caudal neural spines with triangular anterodorsal process that extends well beyond anterior margin of centrum*; (5) anterior haemal arches with paddle-shaped distal expansion*; (6) posterodorsally–anteroventrally oriented ridge on medial surface of anterior end of scapular blade; (7) posteromedial surface of radius concave in proximal view; (8) distal end of radius nearly square, with subequal anteroposterior and mediolateral dimensions. (See Supplementary Information for detailed comparisons with Puertasaurus reuili, a fragmentary, similarly-sized titanosaur from the same lithostratigraphic formation).

Description

The Dreadnoughtus maxilla houses elongate, peg-like teeth typical of derived titanosaurians (Supplementary Fig. 2). Cervical vertebrae have opisthocoelous centra that lack lateral pneumatic fossae (‘pleurocoels’), though they are internally comprised of highly pneumatized camellate tissue. The centrum of a nearly complete posterior (approximately the ninth) cervical vertebra of the Dreadnoughtus holotype (MPM-PV 1156) (Fig. 1A–D, Supplementary Figs. 3, 10) is 1.13 m in length (Supplementary Table 1). This vertebra exhibits a tall, laterally compressed neural spine that differs dramatically from the transversely expanded spine of the single known posterior cervical vertebra of Puertasaurus. (See Supplementary Information for further osteological information.)

The Dreadnoughtus dorsal series is represented by eight partial to nearly complete vertebrae that pertain to the anterior, middle and posterior parts of the sequence (Fig. 1E–J, Supplementary Figs. 5, 11, 12). All dorsal centra are camellate and strongly opisthocoelous with well-developed lateral pneumatic fossae. The anterior (~4th) dorsal vertebra (Fig. 1E, Supplementary Figs. 5A, 11) is nearly complete but strongly dorsoventrally compressed. The neural arch is anteriorly placed and short, thin spinoprezygapophyseal laminae merge with the much more robust prespinal lamina just dorsal to the base of the neural spine. Middle dorsal vertebrae (Fig. 1F–G, Supplementary Fig. 5B–C) closely resemble those of Rapetosaurus18 in anterior view, with prominent spinopostzygapophyseal laminae and a correspondingly expanded neural spine apex. Posterior dorsal vertebrae (Fig. 1H–J, Supplementary Figs. 5D–F, 12) have elevated, posterodorsally inclined neural spines, the lateral surfaces of which possess spinodiapophyseal laminae that are divided into paired rami by a deep coel. Along with the spinopostzygapophyseal laminae, the posterior rami of the spinodiapophyseal laminae terminate dorsally in rugose projections that are oval in posterolateral view (Fig. 1I, Supplementary Fig. 5E). On the transverse process, immediately dorsomedial to the diapophyseal facet, there is a distinct, slightly raised area ornamented by mediolaterally-oriented striations. A comparable condition is reported in the lithostrotian titanosaurs Epachthosaurus, Lirainosaurus, Saltasaurus, Trigonosaurus and other somphospondylans and has been hypothesized to indicate soft-tissue attachment at this site19,20. Dorsal ribs are plank-like, especially distally and have proximal pneumatocoels (Supplementary Fig. 6A). The six sacral centra are firmly coossified and lack external pneumatic fossae (Fig. 1K, Supplementary Fig. 13). Sacral centra and ribs exhibit camellate internal tissue structure.

The caudal series of Dreadnoughtus is nearly completely preserved, lacking only a few of the posterior-most vertebrae (Fig. 1M, Supplementary Figs. 6B–G, 7, 14). The first 21 caudal vertebrae of MPM-PV 1156 are known from a closely associated sequence; caudal vertebrae 5 to 21 and their associated haemal arches were recovered in articulation (Fig. 1M, Supplementary Figs. 6B–E, 7, 14). The first caudal centrum (Fig. 1L–M, Supplementary Figs. 7, 14) has a well-developed ventral keel, a character that, among titanosaurs, is otherwise known only in a more posteriorly-positioned anterior caudal vertebra of the possible saltasaurine Bonatitan21. This Dreadnoughtus vertebra is biconvex, as in derived titanosaurs such as Alamosaurus, Baurutitan and Pellegrinisaurus22,23 and has elongate, plate-like transverse processes reminiscent of those of Saltasaurus24. The complete left transverse process curves posteriorly before arcing anterolaterally and a prominent roughened tubercle adorns its posterodorsal edge. Digital reconstruction (Supplementary Fig. 9) demonstrates that these processes would not have contacted the ilia in life and as such that this biconvex vertebra is not an unfused seventh sacral vertebra as in the saltasaurine Neuquensaurus23,25. All remaining caudal vertebrae have strongly procoelous centra that lack pneumatic fossae (Fig. 1M, Supplementary Fig. 6B, D, F, Supplementary Figs. 7, 14). Anterior caudal centra are pierced by small vascular foramina ventral to the transverse processes, as in Adamantisaurus26, Alamosaurus27, Andesaurus28, Paralititan7, Pellegrinisaurus29 and other sauropods30. Their neural spines are distinctive in possessing hypertrophied prespinal and postspinal laminae (presumably indicative of robust interspinal ligament attachments) and deep, extensively subdivided pneumatocoels between the spinoprezygapophyseal and spinopostzygapophyseal laminae (occupying the position of the conjoined postzygapophyseal spinodiapophyseal and postzygapophyseal centrodiapophyseal fossae of Wilson et al.31). Comparable but less complex coels occur on the first caudal neural spine in Alamosaurus and Opisthocoelicaudia27 and in some anterior caudal spines of Adamantisaurus26, Bonatitan21, Dongyangosaurus32 and Mendozasaurus33. Middle caudal vertebrae have elongate prezygapophyses, as in Aeolosaurus spp.8 and closely related taxa and neural spines with triangular anterodorsal processes; the latter are especially pronounced on caudal vertebrae 11 to 13, extending well beyond the anterior margins of the centra (Fig. 1M, Supplementary Figs. 7, 14). Among titanosaurs, the anterior haemal arches of Dreadnoughtus are unique in possessing paddle-shaped anteroposterior expansions of the distal shaft (Fig. 1M, Supplementary Figs. 7, 14).

The appendicular skeleton of Dreadnoughtus is completely represented except for the manus and part of the pes (Fig. 2A, Supplementary Fig. 9). The 1.74 m scapula of MPM-PV 1156 (Fig. 2B, Supplementary Fig. 15) is the longest yet reported for any titanosaur (Table 1). An oblique, textured ridge, probably indicative of muscle attachment, extends anteroventrally–posterodorsally along the medial face of the blade, posterior to the scar for the M. subscapularis. The coracoid (Fig. 2B, Supplementary Fig. 15) is rectangular with a robust infraglenoid lip, as in many macronarians. The sternal plates are mediolaterally wide with rounded anterolateral and posterolateral ends (Fig. 2C, Supplementary Fig. 15). The massive 1.60 m left humerus of MPM-PV 1156 (Fig. 2D, Supplementary Fig. 16) is greater in minimum shaft circumference (785 mm) than that of all other described titanosaurs and is longer than all other titanosaur humeri except that of Paralititan (Table 1). Its proximal articulation is convex in anterior view, lacking the proximolateral expansion characteristic of saltasaurids34. The deltopectoral crest is prominent, less medially twisted (after accounting for taphonomic distortion) than in Mendozasaurus33 and Opisthocoelicaudia35 and extends distally to about one-third the length of the humerus. It remains narrow in width and has a prominent lateral bulge along its distolateral edge, a feature shared with Alamosaurus, Jainosaurus, Qingxiusaurus and Saltasaurus36. The ulna (Fig. 2D, Supplementary Fig. 16) is stout with a prominent olecranon process and possesses a deep medial depression that renders its proximomedial process concave in proximal view, a condition that is otherwise known only in Elaltitan37. The radius (Fig. 2D, Supplementary Fig. 16) is gracile with an autapomorphically large concavity on the posteromedial aspect of its proximal end. As in Rapetosaurus18, there is a distinct scar on the anteromedial surface of the distal end of the bone.

Table 1 Selected maximum measurements (cm) of appendicular elements of Dreadnoughtus schrani compared to other titanosauriform sauropods, including other gigantic taxa. Non-titanosaurian titanosauriforms (Brachiosaurus, Giraffatitan, Ligabuesaurus, Ruyangosaurus) are listed first and arranged alphabetically; remaining taxa are titanosaurs, listed alphabetically. Measurements in bold are the longest known within Titanosauriformes for each element in question. * = estimate; − = element not preserved; NR = measurement not reported. Anatomical abbreviations: C-cl, mid-posterior cervical centrum length; C-cw, mid-posterior cervical centrum width; Fe, femur; Fi, fibula; Hu, humerus; Il, ilium; Ra, radius; Sc, scapula; Ti, tibia; Ul, ulna. Institutional abbreviations see Supplementary Information

The preacetabular processes of the Dreadnoughtus ilia (Fig. 2E, Supplementary Fig. 17) are less laterally directed than in many titanosaurs (e.g., Isisaurus38, Saltasaurus8, Trigonosaurus39) and are not strongly canted towards the horizontal. A small, rounded tuberosity, seen elsewhere only in the brachiosaurid Giraffatitan40, arises from the ventrolateral edge of the preacetabular process. The robust pubes (Fig. 2E, Supplementary Fig. 17) have proportionately short ischial articulations, as in all titanosaurs more derived than Andesaurus22. The distal pubic blade is dorsoventrally thick and tapers medially, similar to the condition in Opisthocoelicaudia35 but unlike that of most other titanosaurs. The ischia (Fig. 2E, Supplementary Fig. 17) are short and laminar with a moderately expanded distal blade. As in many sauropods (e.g., rebbachisaurids, most macronarians), a tuberosity for attachment of M. flexor tibialis internus III30 is located near the posterior margin of the lateral ischial face.

The left femur of MPM-PV 1156 (Fig. 2F, Supplementary Fig. 18) measures 1.91 m (Table 1). The femoral head is not as proximomedially directed as in many other titanosaurs (e.g., Jainosaurus, Rinconsaurus, Rocasaurus). The fourth trochanter is positioned proximal to midshaft and is comparatively better developed than in most lithostrotians (e.g., Tapuiasaurus41). Unlike the condition in saltasaurids27, the distal condyles are not bevelled dorsomedially. The tibia (Fig. 2F, Supplementary Fig. 18) possesses a large proximolateral bulge similar to that in Diamantinasaurus42, Gobititan43 and Uberabatitan44. The fibula (Fig. 2F, Supplementary Fig. 18) is strikingly robust, with a prominent lateral trochanter and a posteriorly curved distal half that renders the bone slightly sigmoid in lateral view. This sigmoid character is shared with Tastavinsaurus45 and Aeolosaurus sp.46 and is also reported in one Neuquensaurus fibula25. The astragalus (Fig. 2F, Supplementary Fig. 18) is comparable to that of Camarasaurus47 and Elaltitan37, differing from the tall, pyramidal astragali of many other titanosaurs (e.g., Diamantinasaurus, Neuquensaurus). Pedal ungual I (Fig. 2F, Supplementary Fig. 18) retains a large flexor process at the proximal end of its plantar surface, a character shared only with Opisthocoelicaudia35.

Discussion

Based on a phylogenetic analysis (Fig. 3, Supplementary Figs. 19, 20; see Supplementary Information for details), we posit Dreadnoughtus as a member of Titanosauria, intermediate in phylogenetic position between basal representatives of the clade such as Andesaurus and the comparatively derived titanosaurian subclade Lithostrotia. The enormous forms Argentinosaurus and Futalognkosaurus are also recovered as non-lithostrotian titanosaurs. Future fossil discoveries and phylogenetic analyses of Titanosauria are needed to clarify the relationships of these taxa.

Dreadnoughtus is among the largest known titanosaurs. Conclusively establishing the size of the taxon relative to those of most other gigantic representatives of the clade (e.g., ‘Antarctosaurusgiganteus, Argentinosaurus, Paralititan, Puertasaurus) is presently not possible due to the fragmentary nature of the latter forms. Nevertheless, elements of MPM-PV 1156 are comparable in linear dimensions to their counterparts in other huge titanosaurs (Table 1). Furthermore, a recently-refined equation for calculating body mass in quadrupedal tetrapods based on humeral and femoral circumference13,48,49 yields an estimate of 59.3 metric tons for this individual (Supplementary Information)—approaching twice the value previously estimated for the large brachiosaurid Giraffatitan (34.0 metric tons) and approximately four times that estimated for the diplodocid Diplodocus (14.8 metric tons)—using the same method13. Reconstruction of the Dreadnoughtus skeleton (Fig. 2A, Supplementary Fig. 9) with the mostly missing cervical series restored after that of Futalognkosaurus3 produces an approximate body length of 26 m (Supplementary Information).

Remarkably, multiple lines of evidence indicate that, despite its enormous size, MPM-PV 1156 was not osteologically mature at death. The scapula remains unfused to the coracoid (Fig. 2B, Supplementary Fig. 15) and the posteromedial margin of the coracoid foramen abuts the scapula; both of these morphologies have been cited as indicators of osteological immaturity in sauropods50,51. Moreover, although histological analysis of the humerus indicates that its cortical bone has undergone extensive secondary remodelling, the element retains a thick layer of vascularized fibrolamellar bone between the remodelled inner cortex and the periphery of the periosteal surface (see Supplementary Information). It also lacks lines of arrested growth or an external fundamental system52 (Fig. 2G), which may indicate osteological immaturity53 (although Company54 proposed this as a synapomorphy of Titanosauria rather than an indicator of ontogenetic stage). A similar pattern is observed in the dorsal ribs, which are extensively remodelled but retain primary fibrolamellar bone tissue towards the periosteal surface. Recent analyses55,56 have suggested that titanosaurs may have developed extensively remodelled tissues after reaching sexual maturity but prior to attaining their maximum size. Thus, the presence of unremodelled fibrolamellar bone in the outer cortex of the MPM-PV 1156 humerus suggests that this massive Dreadnoughtus individual was still growing at the time of its death.

Dreadnoughtusschrani is the most completely known giant titanosaur. Completeness metrics (Supplementary Table 2) indicate that the new Patagonian taxon has preserved approximately 45.3% of the bones expected in a complete titanosaurian skeleton and (depending on how bones are counted) up to 70.4% of the postcranial elements. By comparison, these same values are 15.2% and 26.8% for Futalognkosaurus, 7.8% and 12.7% for Paralititan, 5.1% and 9.2% for Argentinosaurus, 2.3% and 3.5% for ‘A.’ giganteus and 1.6% and 2.8% for Puertasaurus. Dreadnoughtus is also among the most anatomically informative titanosaurs of any body size. The new taxon can be definitively evaluated for 57.5% of the morphological characters included in the data matrix recently published by Carballido and Sander57. Furthermore, Dreadnoughtus is dramatically more informative than the other gigantic titanosaurs included in our phylogenetic analysis, Futalognkosaurus and Argentinosaurus, which were scored for only 18.5% and 12.6% of the available characters, respectively (Supplementary Table 3). Dreadnoughtus therefore offers important new osteological data for future investigations of the anatomy, biomechanics and evolution of the most massive land animals that have ever existed.

Methods

Phylogenetic analysis

We conducted a phylogenetic analysis to assess the affinities of Dreadnoughtus schrani within Titanosauria. We added the new Patagonian taxon to a recently-published matrix of 70 sauropod taxa and 341 morphological characters57 that contains a broad diversity of titanosaurian and non-titanosaurian titanosauriform genera, including the gigantic form Argentinosaurus. We also added Futalognkosaurus to the matrix (the scoring of which was based on the description by Calvo et al.3 and is presented in the Supplementary Information) to more thoroughly investigate relationships between Dreadnoughtus and other giant titanosaurians. We analysed the augmented matrix using the methods outlined in Carballido and Sander57. Specifically, the multistate characters 12, 58, 95, 96, 102, 106, 108, 115, 116, 119, 120, 154, 164, 213, 216, 232, 233, 234, 235, 256, 267, 298, 299 and 301 were treated as ordered and the matrix was subjected to a heuristic search in TNT (Tree Analysis Using New Technology) v. 1.158 (1,000 replicates of Wagner trees, random addition sequence, tree bisection reconnection branch swapping algorithm, ten trees saved per replicate). The initial trial yielded ten most parsimonious trees of 1,028 steps, the strict consensus of which recovered numerous taxa traditionally considered to be basal titanosauriforms as members of Titanosauria and provided little resolution within Lithostrotia (Supplementary Fig. 19).

Based on numerous aspects of its morphology, the titanosaurian affinities of Dreadnoughtus are not in doubt; the aim of our analysis was therefore to ascertain the position of the new taxon within Titanosauria. Consequently, in an attempt to better resolve titanosaurian interrelationships, we inspected the matrix using the program TAXEQ3 (Safe Taxonomic Reduction Based on Taxonomic Equivalence59). The TAXEQ3 examination did not find taxa that could be safely deleted via safe taxonomic reduction, but did underscore the high proportion of missing data in the matrix. Although Dreadnoughtus lacked only 42.5% of the available character information, 47 (of 72 total) taxa lacked more than 50% of these data. We reanalysed the matrix after pruning 18 of the 20 fragmentary and unstable taxa pruned by Carballido and Sander57, retaining Andesaurus (to define the node-based clade Titanosauria) and Argentinosaurus (another giant titanosaurian). This second iteration recovered 30 most parsimonious trees of 943 steps. The strict consensus of these trees (Fig. 3, Supplementary Fig. 20; Consistency Index = 0.42, Retention Index = 0.76, Rescaled Consistency Index = 0.32) yields considerably greater resolution within Titanosauria and posits Dreadnoughtus as a non-lithostrotian titanosaur more derived than Andesaurus, Epachthosaurus, Argentinosaurus and lognkosaurians (i.e., Futalognkosaurus, Mendozasaurus) but less derived than all other Campanian–Maastrichtian titanosaurs.

Phylogenetic character states of Dreadnoughtus schrani

Scores for Dreadnoughtus schrani for the 341 morphological characters employed by Carballido and Sander57 are as follows:

?????????? ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? ?????????? 1231?202?? 1110-30102 ??0?110001 00-?10102(01) 1121-11111 1200101011 (01)111101111 000211??11 31?????013 ?030000001 00000-1003 10(12)000100? ??0-111011 ?0?0011001 1100011101 0110120111 1001101??? ????????11 1101101000 0110110011 2111?001?1 1111010110 0??11101?? ????1?11?? ?

Body dimensions

Among many other elements, the Dreadnoughtus schrani holotype (MPM-PV 1156) includes the complete left humerus and femur. Because the minimum midshaft circumferences of these bones have been found to scale with body mass in quadrupedal terrestrial tetrapods13,48,49, the preservation of these elements in MPM-PV 1156 permits an estimate of the mass of this specimen. The midshaft circumference of the humerus is 785 mm and that of the femur is 910 mm. Using the scaling equation recently proposed by Campione and Evans49 (logBM = 2.749 * logCH+F − 1.104, where BM is body mass and CH+F is combined humeral and femoral circumference), these values yield an estimated body mass of 59,291 kg (~59.3 metric tons, or 65.4 short tons) for this Dreadnoughtus individual. By comparison, the estimated masses of other medium- and large-bodied titanosaur specimens for which humeral and femoral shaft circumferences have been published are as follows: Opisthocoelicaudia ZPAL MgD-I/4835, 25,418 kg; Alamosaurus TMM 41541-160, 35,164 kg; and Elaltitan PVL 46288, 42,798 kg. Additionally, Benson et al.13 provide an estimate of 38,139 kg for Futalognkosaurus3, based on an undescribed humerus and femur. Large individuals of the diplodocid Diplodocus (USNM 10865) and the brachiosaurid Giraffatitan (HMN SII) have been estimated at 14,813 and 34,003 kg, respectively, using the same equation13,49. It therefore appears that the Dreadnoughtus schrani holotype was considerably more massive than most other titanosaurian specimens and indeed, most other sauropods.

Due primarily to uncertainty in the morphology of the cervical series, it is currently not possible to definitively establish the total body length of Dreadnoughtus. Nevertheless, the elongate nature of the two preserved cervical vertebrae implies that the taxon had a long neck, more similar to those of titanosaurs such as Futalognkosaurus3 and Rapetosaurus18 than to comparatively short-necked forms such as Isisaurus38 and Mendozasaurus62. The centrum of the complete posterior cervical vertebra of MPM-PV 1156 is 113 cm in anteroposterior length. Assuming that the neck proportions of Dreadnoughtus were similar to those of Futalognkosaurus3,63 and that this complete Dreadnoughtus cervical vertebra corresponds to the ninth vertebra in the series, this yields a neck length of approximately 11.3 m for MPM-PV 1156.

The holotype of Tapuiasaurus (MZSP-PV 807) is the only adult titanosaurian specimen known to preserve a complete skull associated with appendicular elements41. Using the radius length of MPM-PV 1156 (95 cm) and scaling up from the relative lengths of the skull and radius in Tapuiasaurus, we estimate the length of the mostly unknown skull of this Dreadnoughtus specimen at 88 cm. Thus, the total combined length of the skull and neck of MPM-PV 1156 is estimated at roughly 12.2 m.

The remainder of the axial skeleton is well-represented in Dreadnoughtus, permitting more precise estimates of its length. The majority of titanosaurs for which the dorsal series is completely known (e.g., Futalognkosaurus, Rapetosaurus, Trigonosaurus, Overosaurus) possess ten vertebrae in this region3,18,39,64; with 11 dorsal vertebrae, Opisthocoelicaudia is the only known exception in this regard35. We therefore assume that ten dorsal vertebrae were present in Dreadnoughtus. The only described titanosaurian specimen with a completely preserved caudal series is the holotype of Opisthocoelicaudia (ZPAL MgD-I/48); this includes 34 vertebrae35. Nevertheless, evidence indicates that the tail may have been longer in some other titanosaurian taxa. For example, exceptional specimens of Epachthosaurus (UNPSJB-PV 920) and Alamosaurus (USNM 15560) preserve the first 30 and 29 caudal vertebrae, respectively, all of which are strongly procoelous61,65. In both of these caudal sequences, the posterior-most preserved vertebra is clearly not the terminal caudal vertebra; moreover, Wilson et al.66 demonstrated that the posterior-most ~seven to eight caudal vertebrae of at least some titanosaurs were biconvex. Furthermore, an as-yet undescribed titanosaurian skeleton from northern Patagonia is reputed to include approximately 65 caudal vertebrae67. Taking all of the above into account, we provisionally estimate that the complete caudal series of Dreadnoughtus would have included approximately 40 vertebrae. Digital reconstruction of the dorsal, sacral and caudal vertebral sequences that incorporates these assumptions (Supplementary Fig. 9) yields a combined length of 13.8 m for these parts of the axial skeleton. When added to the skull and neck length estimated above, this yields an approximate total body length of 26 m for MPM-PV 1156.

Calculating completeness vs. other giant titanosaurs

We quantified the skeletal completeness of Dreadnoughtus and other enormous titanosaurs using the following method. (We chose to devise an un-weighted metric that counts the presence of each element equally. See Mannion and Upchurch68 for an alternative, weighted method.) First, we used material of the most completely known titanosaurs of any size (e.g., Epachthosaurus, Nemegtosaurus, Opisthocoelicaudia, Overosaurus, Rapetosaurus, Saltasaurus, Tapuiasaurus, Trigonosaurus) to estimate the total number of bones in a representative titanosaurian skeleton at 256 (Supplementary Table 2). We then counted the total number of non-duplicated elements preserved between both known Dreadnoughtus specimens (MPM-PV 1156 and MPM-PV 3546) at 116 and used the literature to tally the elements preserved for five other giant titanosaurs: ‘Antarctosaurusgiganteus (six bones)8, Argentinosaurus (13 bones)6, Futalognkosaurus (39 bones)3, Paralititan (20 bones)7,69 and Puertasaurus (four bones)9. These numbers were then divided by 256 to yield completeness percentages for each taxon (Supplementary Table 2).

Because the six titanosaurs under consideration are represented exclusively (‘A.’ giganteus, Argentinosaurus, Futalognkosaurus, Paralititan, Puertasaurus) or almost exclusively (Dreadnoughtus) by postcranial bones, we then explored the postcranial completeness of each taxon. We calculated the total number of postcranial elements expected in a representative titanosaur and then counted all such bones for each taxon in question. We divided the elements preserved by the elements expected to produce percentages of postcranial completeness for each titanosaur (Supplementary Table 2).

Finally, because, from a morphological standpoint, the preservation of one bilaterally symmetrical element is effectively as informative as is the preservation of both, we calculated what we term the ‘mirrored postcranial completeness’ of each of these giant titanosaurs (Supplementary Table 2). When determining mirrored postcranial completeness, bilateral elements are treated as equivalents; in other words, if at least one of a pair of bilaterally symmetrical bones is preserved in a given taxon, that element is counted as fully preserved in that taxon. (As an example, in mirrored postcranial completeness, the humerus of Dreadnoughtus is treated as completely represented, even though only the left humerus of this titanosaur is actually preserved.)

Data archiving

Data reported in this paper are available as Supplementary Information. Specimens MPM-PV 1156 and MPM-PV 3546 are permanently reposited at the Museo Padre Molina in Río Gallegos, Santa Cruz Province, Argentina.

References

  1. Curry Rogers, K. in The Sauropods: Evolution and Paleobiology (Curry Rogers, K. & Wilson, J. A.) 50–103 (University of California Press, 2005).

  2. González Riga, B. J. in Paleontología y Dinosaurios desde América Latina: Proceedings del III Congreso Latinoamericano de Paleonología (Calvo, J., Porfiri, J., González Riga B. J. & Dos Santos, D.) 125–141 (Universidad Nacional de Cuyo, 2011).

  3. Calvo, J. O., Porfiri, J. D., González Riga, B. J. & Kellner, A. W. A. Anatomy of Futalognkosaurus dukei Calvo, Porfiri, González Riga & Kellner, 2007 (Dinosauria, Titanosauridae) from the Neuquén Group (Late Cretaceous), Patagonia, Argentina. Arq. Mus. Nac., Rio de Janeiro 65, 511–526 (2007).

    Google Scholar 

  4. Sander, P. M. et al. Biology of the sauropod dinosaurs: the evolution of gigantism. Biol. Rev. 86, 117–155 (2011).

    Google Scholar 

  5. Huene, F. von. Los saurisquios y ornitisquios del Cretáceo Argentino. An. Mus. La Plata 3, 1–196 (1929).

    Google Scholar 

  6. Bonaparte, J. F. & Coria, R. A. Un nuevo y gigantesco sauropódo titanosaurio de la Formación Río Limay (Albiano–Cenomaniano) de la Provincia del Neuquén, Argentina. Ameghiniana 30, 271–282 (1993).

    Google Scholar 

  7. Smith, J. B. et al. A giant sauropod dinosaur from an Upper Cretaceous mangrove deposit in Egypt. Science 292, 1704–1706 (2001).

    ADS  CAS  Google Scholar 

  8. Powell, J. E. Revision of South American titanosaurid dinosaurs: palaeobiological, palaeobiogeographical and phylogenetic aspects. Rec. Queen. Vic. Mus. 111, 1–173 (2003).

    Google Scholar 

  9. Novas, F. E., Salgado, L., Calvo, J. & Agnolin, F. Giant titanosaur (Dinosauria, Sauropoda) from the Late Cretaceous of Patagonia. Rev. Mus. Argent. Cienc. Nat. Nueva Ser. 7, 37–41 (2005).

    Google Scholar 

  10. Burness, G. P., Diamond, J. & Flannery, T. Dinosaurs, dragons and dwarfs: the evolution of maximal body size. Proc. Natl. Acad. Sci. USA 98, 14518–14523 (2001).

    ADS  CAS  Google Scholar 

  11. Mazzetta, G. V., Christiansen, P. & Fariña, R. A. Giants and bizarres: body size of some southern South American Cretaceous dinosaurs. Hist. Biol. 16, 71–83 (2004).

    Google Scholar 

  12. Carpenter, K. in Paleontology and Geology of the Upper Jurassic Morrison Formation Vol. 36 New Mexico Museum of Natural History and Science Bulletin (Foster, J. R. & Lucas, S. G.) 131–137 (New Mexico Museum of Natural History and Science, 2006).

  13. Benson, R. B. J., Campione, N. E., Carrano, M. T., Mannion, P. D., Sullivan, C., Upchurch, P. & Evans, D. C. Rates of dinosaur body mass evolution indicate 170 million years of sustained ecological innovation on the avian stem lineage. PLoS Biol. 12, e1001853 (2014).

    PubMed  PubMed Central  Google Scholar 

  14. Egerton, V. M. The Geology, Paleontology and Paleoecology of the Cerro Fortaleza Formation, Patagonia (Argentina). Ph.D. thesis, Drexel University (2011).

  15. Egerton, V. M., Novas, F. E., Dodson, P. & Lacovara, K. The first record of a neonatal ornithopod dinosaur from Gondwana. Gondwana Res. 23, 268–271 (2013).

    ADS  Google Scholar 

  16. Walker, J. D., Geissman, J. W., Bowring, S. A. & Babcock, L. E. The Geological Society of America Geologic Time Scale. Geol. Soc. Am. Bull. 125, 259–272 (2012).

    Google Scholar 

  17. Garrido, A. C. Estratigrafía del Grupo Neuquén, Cretácico Superior de la Cuenca Neuquina (Argentina): nueva propuesta de ordenamiento litoestratigráfico. Rev. Mus. Argent. Cienc. Nat. Nueva Ser. 12, 121–177 (2010).

    Google Scholar 

  18. Curry Rogers, K. The postcranial osteology of Rapetosaurus krausei (Sauropoda: Titanosauria) from the Late Cretaceous of Madagascar. J. Vertebr. Paleontol. 29, 1046–1086 (2009).

    Google Scholar 

  19. Sanz, J. L., Powell, J. E., Le Loeuff, J., Martínez, R. & Pereda-Suberbiola, X. in Geology and Palaeontology of the Upper Cretaceous Vertebrate-Bearing Beds of the Laño Quarry (Basque-Cantabrian Region, Iberian Peninsula). Estudios del Museo de Ciencias Naturales de Alava (Astibia H., et al.) 235–255 (Museo de Ciencias Naturales de Alava, 1999).

  20. D'Emic, M. D. The early evolution of titanosauriform sauropod dinosaurs. Zool. J. Linn. Soc. 166, 624–671 (2012).

    Google Scholar 

  21. Martinelli, A. G. & Forasiepi, A. Late Cretaceous vertebrates from Bajo de Santa Rosa (Allen Formation), Río Negro Province, Argentina, with the description of a new sauropod dinosaur (Titanosauridae). Rev. Mus. Argent. Cienc. Nat. Nueva Ser. 6, 257–305 (2004).

    Google Scholar 

  22. Salgado, L., Coria, R. A. & Calvo, J. O. Evolution of titanosaurid sauropods. I: phylogenetic analysis based on the postcranial evidence. Ameghiniana 34, 3–32 (1997).

    Google Scholar 

  23. D'Emic, M. D. & Wilson, J. A. New remains attributable to the holotype of the sauropod dinosaur Neuquensaurus australis, with implications for saltasaurine systematics. Acta Palaeontol. Pol. 56, 61–73 (2011).

    Google Scholar 

  24. Powell, J. E. in Los Dinosaurios y Su Entorno Biotico. Actas del Segundo Curso de Paleontología en Cuenca (Sanz, J. L. & Buscalioni, A. D.) 165–230 (Institutio ‘Juan de Valdes’ 1992).

  25. Salgado, L., Apesteguía, S. & Heredia, S. E. A new specimen of Neuquensaurus australis, a Late Cretaceous saltasaurine titanosaur from north Patagonia. J. Vertebr. Paleontol. 25, 623–634 (2005).

    Google Scholar 

  26. Santucci, R. M. & Bertini, R. J. A new titanosaur from western São Paulo state, Upper Cretaceous Bauru Group, south-east Brazil. Palaeontology 49, 59–66 (2006).

    Google Scholar 

  27. Wilson, J. A. Sauropod dinosaur phylogeny: critique and cladistic analysis. Zool. J. Linn. Soc. 136, 217–276 (2002).

    Google Scholar 

  28. Mannion, P. D. & Calvo, J. O. Anatomy of the basal titanosaur (Dinosauria, Sauropoda) Andesaurus delgadoi from the mid-Cretaceous (Albian–early Cenomanian) Río Limay Formation, Neuquén Province, Argentina: implications for titanosaur systematics. Zool. J. Linn. Soc. 163, 155–181 (2011).

    Google Scholar 

  29. Salgado, L. Pellegrinisaurus powelli nov. gen. et sp. (Sauropoda, Titanosauridae) from the Upper Cretaceous of Lago Pellegrini, northwestern Patagonia, Argentina. Ameghiniana 33, 355–365 (1996).

    Google Scholar 

  30. Mannion, P. D., Upchurch, P., Barnes, R. N. & Mateus, O. Osteology of the Late Jurassic Portuguese sauropod dinosaur Lusotitan atalaiensis (Macronaria) and the evolutionary history of basal titanosauriforms. Zool. J. Linn. Soc. 168, 98–206 (2013).

    Google Scholar 

  31. Wilson, J. A., D'Emic, M. D., Ikejiri, T., Moacdieh, E. M. & Whitlock, J. A. A nomenclature for vertebral fossae in sauropods and other saurischian dinosaurs. PLoS ONE 6, e17114 (2011).

    ADS  PubMed  PubMed Central  CAS  Google Scholar 

  32. Lü, J., Azuma, Y., Chen, R., Zheng, W. & Jin, X. A new titanosauriform sauropod from the early Late Cretaceous of Dongyang, Zhejiang Province. Acta Geol. Sin.-Engl. 82, 225–235 (2008).

    Google Scholar 

  33. González Riga, B. J. A new titanosaur (Dinosauria, Sauropoda) from the Upper Cretaceous of Mendoza Province, Argentina. Ameghiniana 40, 155–172 (2003).

    Google Scholar 

  34. Upchurch, P. The phylogenetic relationships of sauropod dinosaurs. Zool. J. Linn. Soc. 124, 43–103 (1998).

    Google Scholar 

  35. Borsuk-Bialynicka, M. A new camarasaurid sauropod Opisthocoelicaudia skarzynskii gen. n., sp. n. from the Upper Cretaceous of Mongolia. Palaeontol. Pol. 37, 5–78 (1977).

    Google Scholar 

  36. Wilson, J. A., Barrett, P. M. & Carrano, M. T. An associated partial skeleton of Jainosaurus cf. septentrionalis (Dinosauria: Sauropoda) from the Late Cretaceous of Chhota Simla, Central India. Palaeontology 54, 981–998 (2011).

    Google Scholar 

  37. Mannion, P. D. & Otero, A. A reappraisal of the Late Cretaceous Argentinean sauropod dinosaur Argyrosaurus superbus, with a description of a new titanosaur genus. J. Vertebr. Paleontol. 32, 614–638 (2012).

    Google Scholar 

  38. Jain, S. L. & Bandyopadhyay, S. New titanosaurid (Dinosauria: Sauropoda) from the Late Cretaceous of central India. J. Vertebr. Paleontol. 17, 114–136 (1997).

    Google Scholar 

  39. Campos, D. de A., Kellner, A. W. A., Bertini, R. J. & Santucci, R. M. On a titanosaurid (Dinosauria, Sauropoda) vertebral column from the Bauru Group, Late Cretaceous of Brazil. Arq. Mus. Nac., Rio de Janeiro 63, 565–593 (2005).

    Google Scholar 

  40. Janensch, W. Die Gliedmaszen und Gliedmaszengürtel der Sauropoden der Tendaguru-Schichten. Palaeontographica Suppl. 7, 177–235 (1961).

    Google Scholar 

  41. Zaher, H. et al. A complete skull of an Early Cretaceous sauropod and the evolution of advanced titanosaurians. PLoS ONE 6, e16663 (2011).

    ADS  PubMed  PubMed Central  CAS  Google Scholar 

  42. Hocknull, S. A. et al. New mid-Cretaceous (latest Albian) dinosaurs from Winton, Queensland, Australia. PLoS ONE 4, e6190 (2009).

    ADS  PubMed  PubMed Central  Google Scholar 

  43. You, H., Tang, F. & Luo, Z. A new basal titanosaur (Dinosauria: Sauropoda) from the Early Cretaceous of China. Acta Geol. Sin.-Engl. 77, 424–429 (2003).

    Google Scholar 

  44. Salgado, L. & de Souza Carvalho, I. Uberabatitan riberoi, a new titanosaur from the Marília Formation (Bauru Group, Upper Cretaceous), Minas Gerais, Brazil. Palaeontology 51, 881–901 (2008).

    Google Scholar 

  45. Canudo, J. I., Royo-Torres, R. & Cuenca-Bescos, G. A new sauropod: Tastavinsaurus sanzi gen. et sp. nov. from the Early Cretaceous (Aptian) of Spain. J. Vertebr. Paleontol. 28, 712–731 (2008).

    Google Scholar 

  46. Salgado, L., Coria, R. A. & Calvo, J. O. Presencia del genero Aeolosaurus (Sauropoda, Titanosauridae) en la Formacion Los Alamitos, Cretácico Superior de la Provincia de Río Negro, Argentina. Rev. U. Guarulhos–Geoc. 2, 44–49 (1997).

    Google Scholar 

  47. McIntosh, J. S., Miles, C. A., Cloward, K. C. & Parker, J. R. A new nearly complete skeleton of Camarasaurus. Bull. Gunma Mus. Nat. Hist. 1, 1–87 (1996).

    Google Scholar 

  48. Anderson, J. F., Hall-Martin, A. & Russell, D. A. Long-bone circumference and weight in mammals, birds and dinosaurs. J. Zool. 207, 53–61 (1985).

    Google Scholar 

  49. Campione, N. E. & Evans, D. C. A universal scaling relationship between body mass and proximal limb bone dimensions in quadrupedal terrestrial tetrapods. BMC Biol. 10, 1–22 (2012).

    Google Scholar 

  50. Wilhite, R. in Thunder-Lizards: The Sauropodomorph Dinosaurs (Tidwell, V. & Carpenter, K.) Ch. 13, 268–301 (Indiana University Press, 2005).

    Google Scholar 

  51. Schwarz, D., Ikejiri, T., Breithaupt, B. H., Sander, P. M. & Klein, N. A nearly complete skeleton of an early juvenile diplodocid (Dinosauria: Sauropoda) from the Lower Morrison Formation of north central Wyoming and its implications for early ontogeny and pneumaticity in sauropods. Hist. Biol. 19, 225–253 (2007).

    Google Scholar 

  52. Schroeter, E., Boles, Z. & Lacovara, K. The histology of a massive titanosaur from Argentina and implications for maximum size. Soc. Vertebr. Paleontol., Prog. Abst. 2011, 189 (2011).

    Google Scholar 

  53. Klein, N. & Sander, M. Ontogenetic stages in the long bone histology of sauropod dinosaurs. Paleobiology 34, 247–263 (2008).

    Google Scholar 

  54. Company, J. Bone histology of Lirainosaurus astibiae (Dinosauria: Sauropoda) from the latest Cretaceous of Spain. Naturwissenschaften 98, 67–78 (2011).

    ADS  CAS  Google Scholar 

  55. Stein, K. et al. Small body size and extreme cortical bone remodeling indicate phyletic dwarfism in Magyarosaurus dacus (Sauropoda: Titanosauria). Proc. Natl. Acad. Sci. USA 107, 9258–9263 (2010).

    ADS  CAS  Google Scholar 

  56. Klein, N. et al. Modified laminar bone in Ampelosaurus atacis and other titanosaurs (Sauropoda): implications for life history and physiology. PLoS ONE 7, e36907 (2012).

    ADS  PubMed  PubMed Central  CAS  Google Scholar 

  57. Carballido, J. L. & Sander, P. M. Postcranial axial skeleton of Europasaurus holgeri (Dinosauria, Sauropoda) from the Upper Jurassic of Germany: implications for sauropod ontogeny and phylogenetic relationships of basal Macronaria. J. Syst. Palaeontol. 12, 335–387 (2014).

    Google Scholar 

  58. Goloboff, P. A., Farris, J. S. & Nixon, K. C. TNT, a free program for phylogenetic analysis. Cladistics 24, 774–786 (2008).

    Google Scholar 

  59. Wilkinson, M. TAXEQ3: software and documentation (Department of Zoology, The Natural History Museum, London, 2001).

  60. Lehman, T. M. & Coulson, A. B. A juvenile specimen of the sauropod dinosaur Alamosaurus sanjuanensis from the Upper Cretaceous of Big Bend National Park, Texas. J. Paleontol. 76, 156–172 (2002).

    Google Scholar 

  61. Martínez, R. D., Giménez, O., Rodríguez, J., Luna, M. & Lamanna, M. C. An articulated specimen of the basal titanosaurian (Dinosauria: Sauropoda) Epachthosaurus sciuttoi from the early Late Cretaceous Bajo Barreal Formation of Chubut Province, Argentina. J. Vertebr. Paleontol. 24, 107–120 (2004).

    Google Scholar 

  62. González Riga, B. J. Nuevos restos fósiles de Mendozasaurus neguyelap (Sauropoda, Titanosauria) del Cretácico tardío de Mendoza, Argentina. Ameghiniana 42, 535–548 (2005).

    Google Scholar 

  63. Calvo, J. O., Porfiri, J. D., González Riga, B. J. & Kellner, A. W. A. A new Cretaceous terrestrial ecosystem from Gondwana with the description of a new sauropod dinosaur. An. Acad. Brasil. Ciênc. 79, 529–541 (2007).

    Google Scholar 

  64. Coria, R. A., Filippi, L. S., Chiappe, L. M., García, R. & Arcucci, A. B. Overosaurus paradasorum gen. et sp. nov., a new sauropod dinosaur (Titanosauria: Lithostrotia) from the Late Cretaceous of Neuquén, Patagonia, Argentina. Zootaxa 3683, 357–376 (2013).

    Google Scholar 

  65. Gilmore, C. W. Reptilian fauna of the North Horn Formation of central Utah. U.S.D.I. Prof. Pap. 210-C, 1–53 (1946).

    Google Scholar 

  66. Wilson, J. A., Martinez, R. N. & Alcober, O. A. Distal tail segment of a titanosaur (Dinosauria: Sauropoda) from the Upper Cretaceous of Mendoza, Argentina. J. Vertebr. Paleontol. 19, 591–594 (1999).

    Google Scholar 

  67. Calvo, J. O., Coria, R. A. & Salgado, L. Uno de los mas completos Titanosauridae (Dinosauria – Sauropoda) registrados en el mundo. Ameghiniana 34, 534 (1997).

    Google Scholar 

  68. Mannion, P. D. & Upchurch, P. Completeness metrics and the quality of the sauropodmomorph fossil record through geological and historical time. Paleobiology 36, 283–302 (2010).

    Google Scholar 

  69. Lamanna, M. C. Late Cretaceous Dinosaurs and Crocodyliforms from Egypt and Argentina. Ph.D. thesis, University of Pennsylvania (2004).

  70. Ibiricu, L. M. et al. The southernmost records of Rebbachisauridae (Sauropoda: Diplodocoidea), from early Late Cretaceous deposits in central Patagonia. Cretac. Res. 34, 220–232 (2012).

    Google Scholar 

  71. Riggs, E. S. Structure and relationships of opisthocoelian dinosaurs. Part II. The Brachiosauridae. Field Columbian Mus. Pub. 94, Geol. Ser. 2, 229–247 (1904).

    Google Scholar 

  72. Bonaparte, J. F., González Riga, B. J. & Apesteguía, S. Ligabuesaurus leanzai gen. et sp. nov. (Dinosauria, Sauropoda), a new titanosaur from the Lohan Cura Formation (Aptian, Lower Cretaceous) of Neuquén, Patagonia, Argentina. Cretac. Res. 27, 364–376 (2006).

    Google Scholar 

  73. Lü, J. et al. A new gigantic sauropod dinosaur from the Cretaceous of Ruyang, Henan, China. Geol. Bull. China 28, 1–10 (2009).

    Google Scholar 

Download references

Acknowledgements

We thank J. Battisto, G. Blanco, G. Casal, N. Friedman, W. Gallagher, B. Gilio, U. Goren, E. Haganbarth, Y. Kamerbeek, M. Luna, Y. Manor, E. Palko, G. Povazsan and Y. Sabag for tireless assistance in the field; A. Calvetti, N. Franco, J. Lacovara and I. Saldia for logistical support; R. Boudwin, G. Leva, F. Maahs, A. Saunders, J. Spotila, A. Lowman, D. Crawford, J. Tucker and D. Murasko for research and facilities support at Drexel University; F. Ercolano, P. Hearn, J. Pump, G. Warner, Rock-It Cargo and Hamburg Süd Group for shipping; and L. Dreizler, S. Hevia, J. Maglio, K. McCardell, M. Palacios, G. Parma, R. Paz, E. Romero, A. Rosa, P. Tubaro, the Museo Argentino de Ciencias Naturales Bernardino Rivadavia, the Museo Padre Molina and the Province of Santa Cruz for permitting, customs and insurance. Many fossil preparators laboured over Dreadnoughtus schrani, including E. Boucher, J. Caton, R. Christoforetti, A. Dragon, A. Jaworski, K. Keen, A. Malik, A. Patel, D. Pickering, J. Sawchak, A. Shaw and N. Schiff. The 3D imaging was made possible by G. Keighton, D. McDevitt, S. Pandya, R. Primerano, K. Vannix and J. Spanier and the Drexel Centralized Research Facility. We are grateful to V. Feldman for constructing Fig. 1M and Supplementary Fig. 7, L. Wright and G. Schultz for drafting Fig. 2A, T. Hsieh for advice on posture and gait in Fig. 2A, S. Siegler for assistance with the construction of 3D PDFs, H. Goldman for histological imaging and B. Creisler for etymological consultations. We appreciate the invaluable technical input of M. Bonnan and M. Schweitzer. This work was supported by the National Science Foundation (EAR Award 0603805 and three Graduate Research Fellowships [DGE Award 1002809]), the Jurassic Foundation, R. Seidel, Drexel University, The Academy of Natural Sciences of Drexel University, Carnegie Museum of Natural History and the generosity of A. Schran.

Author information

Affiliations

Authors

Contributions

K.J.L. directed the project; K.J.L., M.C.L., L.M.I., J.C.P., V.M.E., A.E.M., C.L.C. and J.P.S. collected specimens in the field; K.J.L., M.C.L. and J.C.P. supervised fossil preparation and preparators included M.C.L., L.M.I., J.C.P., E.R.S., P.V.U., K.K.V., Z.M.B., A.M.C., E.K.F. and V.M.E.; fossils were described by K.J.L., M.C.L., L.M.I., E.R.S., P.V.U., K.K.V., Z.M.B. and J.D.H.; 3D scanning was accomplished by E.R.S., P.V.U., K.K.V., Z.M.B., A.M.C. and E.K.F.; histology was conducted by E.R.S. and Z.M.B.; mass estimates and completeness metrics were calculated by M.C.L. and P.V.U.; 3D PDFs were generated by K.K.V. and E.K.F.; phylogenetic analysis was done by M.C.L., P.V.U. and K.K.V.; permitting was accomplished by K.J.L., R.D.M. and F.E.N.; R.D.M. and F.E.N. gave logistical and analytical advice; K.J.L., M.C.L., E.R.S., P.V.U., K.K.V. and Z.M.B. wrote the paper.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Electronic supplementary material

Rights and permissions

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. The images or other third party material in this article are included in the article's Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder in order to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Lacovara, K., Lamanna, M., Ibiricu, L. et al. A Gigantic, Exceptionally Complete Titanosaurian Sauropod Dinosaur from Southern Patagonia, Argentina. Sci Rep 4, 6196 (2014). https://doi.org/10.1038/srep06196

Download citation

Further reading

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing