The West African Gaboon viper (Bitis rhinoceros) is a master of camouflage due to its colouration pattern. Its skin is geometrically patterned and features black spots that purport an exceptional spatial depth due to their velvety surface texture. Our study shades light on micromorphology, optical characteristics and principles behind such a velvet black appearance. We revealed a unique hierarchical pattern of leaf-like microstructures striated with nanoridges on the snake scales that coincides with the distribution of black colouration. Velvet black sites demonstrate four times lower reflectance and higher absorbance than other scales in the UV – near IR spectral range. The combination of surface structures impeding reflectance and absorbing dark pigments, deposited in the skin material, provides reflecting less than 11% of the light reflected by a polytetrafluoroethylene diffuse reflectance standard in any direction. A view-angle independent black structural colour in snakes is reported here for the first time.
Colour plays an important role in animal signalling. Intense colours are a tool in mate choice1,2,3,4,5 and communication6. Conspicuous aposematic colouration warns predators of inedibility, i.e. poisonous or venomous prey and is imitated in mimicry7. Moreover, colouration enables body temperature control8,9,10,11. Thus, pigments are widely spread in the animal kingdom. Besides the omnipresent dark melanin also yellowish and reddish pigments are known in many vertebrates, such as reptiles and birds12,13,14,15,16.
The limited range of these pigmental colours is extended with optical effects based on the surface or/and material structure (structural colours)17. In skin and feathers of birds the wide range of colouration can be ascribed to coherent scattering by integumental arrays like spongy keratin matrix18,19,20. In poikilothermic vertebrates iridophores yield hues of white, blue and khaki by the absorption, reflection, refraction and scattering of light14,15,21. Iridescence, the phenomenon of viewing angle depending colour shifting, is another structural effect based on coherent scattering. This effect has been convergently evolved in insects, snakes and the feathers of birds22,23,24,25,26,27,28,29,30,31,32,33. While colouration in these examples provides conspicuity, colouration is also applied to prevent detection (crypsis) which is a benefit for animals of prey as well as for predators (aggressive mimicry)7.
Countershading cancels out shadows originating from directional light (self-shadow concealment) or obliterates the spatial body form of an animal (obliterative shading). Colour, lightness and colouration pattern can be either adapted to the surrounding (background matching) or arranged to markings that blur during motion in order to match the animal′s surface in locomotion to the surrounding (flicker-fusion camouflage). Obvious markings, such as geometrical spots, are used to create false edges or boundaries to veil the animal′s true outline and shape (disruptive colouration) or to distract the attention of the spectator to parts of the body (distractive markings)34.
The West African Gaboon viper, Bitis rhinoceros (SCHLEGEL, 1855), is by far the largest of the African vipers35 and the unique colouration makes this species a master of camouflage among snakes. The West African Gaboon viper′s skin is divided in sharp contoured hourglass-shaped spots in shades of white, brown and black (Fig. 1a). Intense colouration of black spots is reminiscent of black velvet and purports spatial depth. This results in high-contrast to the pale-coloured rest. Thus, the body contour of the large snake is nearly invisible at the richly-patterned ground of the forest (Fig. 1b).
Snake scales feature specific structures at their surface, so called microornamentation36. Skin microornamentation has a great variability in the micro- and nanometre range in different snake species36,37,38,39,40,41,42,43,44,45,46,47,48,49. Its taxonomic relevance40,50 and correlations between microornamentation type, phylogeny and animal's habitat51 have been previously discussed. Frictional modulation by ventral microornamentation has been previously shown52,53,54,55. The role of microornamentation for generating specific optical properties has been assumed since its discovery38 and is documented for the indigo snake (Drymarchon couperi) and fossorial uropeltid snakes. In the first species, the denticulate scale topography acts as diffraction grating generating an iridescent effect24. At dorsal scales of representatives of uropeltidae striations with intermediate pits yield diffractive colour ranging from blue to orange25. However, microornamentation that enhances pigment based colouration has not been found in snakes so far.
In this study we examined morphology and optical properties of the dorsal skin in the West African Gaboon viper, B. rhinoceros in order to reveal possible effects of scale microornamentation on its black appearance. By the use of scanning electron microscopy (SEM), we compared the surface topography of velvet black and pale scales. Optical measurements were carried out to determine their reflectance, transmittance and absorbance characteristics.
The original colouration of the West African Gaboon viper partly remains in the shed skin (exuvia). Its dorsal surface has alternating velvet black, light brown, and pale colours (Fig. 2a). The light brown colour is composed of black and whitish dots. In cases where colouration boundaries are not coincide with the scale edges, the colouration changes within one single scale and scales demonstrate sharp colouration boundaries. Ventral scales are yellowish and nearly transparent. After sputter-coating with a 15 nm thick layer of gold-palladium, the dorsal colouration pattern and colour boundaries remained at the exuvia (Fig. 2b). Coated black areas and black dots of the light brown areas appeared black further on. Coated pale areas and dots and ventral scales had a light metallic lustre.
Pale and black areas of exuviae also differed in pigmentation. Under the light microscope dark pigments were solely found in black areas and were only located in the external layers of the integument (Fig. 2c). In pale areas all layers were transparent (Fig. 2d).
SEM images from exuviae of B. rhinoceros showed that structuring of scale surfaces coincided with the colouration. Black areas featured a hierarchical micro- and nanostructured surface (Figs. 3a–d). They were covered with leaf-like microstructures (Fig. 3a) consisting of several crests (Fig. 3b). Measured at the tip, the leaf-like structures had an average height of 30 ± 4 μm (mean ± s.d.) and an average density of 1900 ± 100 mm−2. These structures were covered by branched ridges at the nanometre scale (Fig. 3c). The ridges averaged a height of 600 ± 10 nm, thickness of 60 ± 10 nm and were after branching parallel with a distance of 330 ± 50 nm to each other. Their orientation was perpendicular to the contour lines of the leaf-like structures towards the apex and crests (Fig. 3b). Ridges were regularly connected with struts (Fig. 3c). Areas between the leaf-like structures were also covered with the ridges (Fig. 3d). However, in this region ridges featured additionally hair-like protuberances (spinules, Fig. 3d). Pale scale sites featured a verrucate surface with lower elevations of 10 ± 1 μm average height (Fig. 3e). The average density of these elevations (2000 ± 200 mm−2) was similar to that found in leaf-like structures (t-test, P = 0.219). Elevation surfaces were interspersed with nanoscaled pits (Fig. 3f, g).
The reflectance spectra of ventral scales, dorsal pale sites, dorsal black sites and of 15 nm thick Au-Pd coated scales are shown in Fig. 4. The reflectance of pale scales and black dorsal scales was different in the spectral range 250–950 nm. Depending on the wavelength, pale scales reflected 16–70% (median: 26.7%) of the diffuse polytetrafluoroethylene reflectance standard. In contrast, black scales reflected only 4.0– 58.0% (median: 10.8%). Pale scales reflected stronger than black ones in the whole analysed spectral range (Wilcoxon Signed Rank (WSR) Test, P = <0.001). The reflectance of both scale types increased with an increasing wavelength and reached its maximum at the wavelength of 880 nm. Differences in reflectance between pale and black scales were higher at short wavelengths below 600 nm (Fig. 4b). This is apparent in the different slope of reflectance spectra for increasing wavelengths (Fig. 4a). For instance, black scales reflected less than 25% at wavelengths ranging from 500 to 600 nm compared to pale scales (Fig. 4b).
Also metal coated black and pale sites on scales maintained similar reflection characteristics (Fig. 4a). However, coated pale scales (median: 55.5%) were stronger reflectors than uncoated pale scales (WSR Test, P = <0.001) and the reflectance of coated pale scales was as high as that of uncoated ventral scales (median: 55.2%). On the contrary, metal coating of black scales effected the decrease of their reflectance (median: 3.5%). In contrast to uncoated black scales, a low reflectance (mean: 3.4%) was observed in coated black scales for a wide spectral range 300–800 nm.
In Fig. 5 we present the scattering properties of black and pale snake scales and scattering properties of a rough surface in accordance to the Oren – Nayar model56 (Fig. 5c). The angular dependence of light scattering of black and pale scales at 45° illumination (Fig. 5a) was different (Fig. 5b–f). As in the previous measurement, intensity of scattered light of the pale scales was higher than in the black scales (Fig. 5b, e). Such a difference was observed in both cases, when sensor and irradiation source were oriented laterally and rostro-caudally to the scales (Fig. 5d–f).
In addition to their differences in total scattering and reflection, black and pale scales featured also contrary properties of angle dependent scattering. The pale scales featured a main direction of reflected light (700 nm) at angles 40–60° (Fig. 5c, d). The intensity of the scattering light, measured at these detection angles, was higher than the intensity detected from other angles in the whole spectral range. The lowest scattering intensity was measured at angles of 0° and 80° (Fig. 5c, d). In black scales the highest intensity of scattered light was measured at low angles of detection (<40°), corresponding with a higher rate of scattering perpendicular to the surface (Fig. 5e, f). At higher angles to the surface′s normal, corresponding with a horizontal view on the scales, the detected intensity decreased continuously (Fig. 5e, f). Although angle-dependent distribution of intensity was similar in both laterally and rostro-caudally orientation of scales to the sensor and source of irradiation, in both black and pale surfaces the variation of intensity over the detection angles was higher in rostro-caudal arrangement (Fig. 5d, f). In these cases, the range between the maxima and minima of the intensity curves was larger (Fig. 5d, f).
The run of our fitted curve differed from scattering curves of both biological surfaces (Fig. 5c). In the model, we obtained the best fit in the case when the angles of the v–shape cavities56 of the model surface were not normally distributed (Gaussian distribution), but homogenously (homogenous distribution). A maximum of intensity as observed in pale scales indicating specular reflection was not predicted by the model. In the model, the intensity of scattered light increases with increasing angle (Fig. 5c). Such angle-dependent scattering is contrary to the black scales of the snake (Fig. 5f).
Different scale types showed also different transmittance (the ratio of the transmitted to incident irradiance). Data for the uncoated ventral scales, uncoated and Au-Pd coated dorsal black and pale scales are presented in Fig. 6. The nearly transparent ventral scales transmitted more than 58% of light in the measured spectral range (Fig. 6a). Uncoated pale scales transmitted 8–28% of the incident light (Fig. 6a). After Au-Pd coating, transmittance of pale scales decreased by one half (Fig. 6a). In comparison to uncoated pale scales, coated and uncoated black scales transmitted less radiation, particularly in the wavelength range of 400–900 nm (Fig. 6b). Black and pale scales of B. rhinoceros had also different absorption characteristics. After one minute long warming up by electrical lamp illumination (near UV - visible light), dark areas of the exuvia were on average 2°C warmer than pale areas (Fig. 7).
The microornamentation in velvet black regions of the Gaboon viper skin is unique among snakes. Leaf-like microstructures with both nanoridges and hair-like nanoprotuberances that coincide with black skin colouration have never been described before. Close relatives of the West African Gaboon viper, the western many-horned adder, Bitis caudalis51, and the mountain adder, B. atropos57, feature only a less complex dorsal pattern of lower microscaled elevation with pits. This structuring is similar to that of the pale regions of B. rhinoceros. Location of the leaf-like microstructures in the West African Gaboon viper and their dimensions in the range of visible light wavelengths suggest the contribution of microornamentation to the velvet black appearance. Gold-palladium coating on relatively flat ventral scales turns it to the metallic appearance. In contrast to this, after coating of dorsal black and pale scales, the colouration contrast remains because coated black sites remain black. Consequently, the surface structures of the black scales must be responsible for the velvet black appearance or at least enhance it.
According to the conservation law, incident light is reflected, transmitted, or absorbed by a sample. Absorbance ability is important for surface′s dark appearance. The theoretical darkest surface, an ideal black body, is a total absorber, which absorbs incident light and does not reflect or transmit any radiation58. Since pale scales reflect and transmit more light than black scales, especially the wavelength range 400–700 nm, black scales must absorb more light than pale scales. According to Kirchhoff′s law of thermal radiation, at thermal equilibrium, the emissivity of a body or surface equals its absorptivity58. In the West African Gaboon viper, the resulting emitted heat of the absorbing black areas was detectable by IR imaging. As there is no solid evidence in the literature that the arrangement and material of adjacent scales are different in snakes, the faster heat up process of black scales in comparison to pale scales must be solely caused by their pigmentation and surface structure.
The hierarchical microornamentation of the West African Gaboon viper′s black scales gains the pigmental absorbance. Incident light is reflected multiply and scattered by surface irregularities in the nano- and micrometre range (light trapping). In any case, one part of the incident (or previously by the structures scattered or reflected) light could be absorbed by dark pigments that are deposited within the uppermost layers of skin59. However, our data show that absorbing pigments are not the main reason for the black appearance of the snake scales. The refractive index of a material and its relation to that of the surrounding medium is the decisive factor which defines whether electromagnetic radiation is reflected or led into the material where it can be absorbed. The refractive index of the snake′s epidermal material mainly consisting of α- and β-keratin60 can be estimated as that of the keratin of birds (refractive index 1.56)61,62, which is lower than that of metal. As known from the structures on the wings of butterflies63, the intrinsic refractive index of the epidermis of black scales of B. rhinoceros can be shifted by the nanostructures in wavelength dimension. Thereby surface structuring influences the rate of reflection and transmission which corresponds to the absorption. In our measurements, metal coated black snake scales maintained their black colouration and became even less reflective than the untreated scales. Considering the high refractive index of metal, the ultrablack appearance might not be due to the effect of pigment absorption. The dark colouration must be rather caused by a structure-based increase of the refractivity.
In order to confirm the nanostructures′ responsibility for the appearance of black snake scales, we compared the angle dependence of scattering of snake scales with calculated data from an established model for reflection of a surface with microscopic v-shaped cavities56. The model parameters were selected to obtain the best fit to the biological surface. Whereas the model provided an approximation for the scattering properties of pale scales, particularly with homogenous distribution of cavity angles, for the black surfaces it failed and even led to contrary results with regard to the scattering at small and large angles. These differences can be only explained by the effect of nanostructures, which is not considered in the model of Oren and Nayar56.
In both black and pale scales angle-dependent scattering was nearly similar in both orientations. This can be explained with the nearly isotropic arrangement of leaf-like structures, crests and nanoridges. Slightly differences can be explained by a low degree of orientation of micro- and nanostructures toward the axis of the snake's body.
The term “velvet-like” is used in many contexts, in scientific publications as well as in the everyday language. Velvet tissue fascinates in many respects. Its intrinsic gloss (velvet gloss) only occurs at certain angles64. At all other angles the low reflecting velvet shows high colour saturation and appears darker than other materials (velvet effect). Similar characteristics also occur in plants. At petals of Viola tricolor hortensis (pansy) and Primula sinensis papillate structures that are filled with a pigment containing cellular fluid and covered by a pellucid reflecting cuticle lead to a deep colour that change into a velvet-like gloss depending on illumination and viewing angle65,66. The West African Gaboon viper′s black scales feature a low-reflecting black colouration for a large range of incident wavelengths. Regarding this, black scales have a velvet effect. However, low reflectance is maintained for any viewing angle. According to this, the optical properties of Gaboon viper′s black scales differ from that of glossy velvet. In animal kingdom a hierarchically structured surface, like the microornamentation at black scales of the Gaboon viper causing low-reflectance, is unique and only comparable with the structures responsible for ultra-black in butterflies. Papilio ulysses features a hierarchical structured surface which enhances pigmental blackness63. A microscopic lattice of struts and walls between a periodic ridging of pitch about 2–3 μm and densely distributed lattice of cuticle underneath these structures scatter incident light towards the diffuse distributed pigmentation. Additionally, nanoscopic ridges on the ridging in subwavelength range are hypothesized to function as impedance matching elements63. In contrast to the butterfly, the West African Gaboon viper's microornamentation is isotropic at micro- and nanoscale and not arranged in several layers. This feature causes suppression of specular reflection. However, the physical principle of the guiding of incident light towards embedded absorbing pigments is fundamental for both the snake′s and butterfly′s system. This effects the low-reflectance of these surfaces.
The benefits of structures enhancing black colouration in snakes seem to be obvious. However, biological surfaces are generally multifunctional. Ecology and lifestyle of species may suggest the functions of their morphologic features but are always speculative. The West African Gaboon viper inhabits West Africa from Togo to Guinea67. It lives at margins of and within the tropical rainforest, in swamp areas and near water streams35,67. But also anthropogenic habitats like plantations and secondary forest are inhabited. B. rhinoceros is recognized as separate species only recently68,69,70 and has previously been a subspecies of Bitis gabonica. As its relative B. gabonica71, B. rhinoceros is a terrestrial nocturnal ambusher sitting for hours in the vegetation and waiting for birds and mammals, especially in nightfall30. Prey is captured with one final fast strike and killed by the injection of venom by the fangs72. If the snake feels threatened, it hisses loudly by the expiration of each breath35,72. The camouflage of the snake on the rainforest floor plays a key role for hunting as well as for the prevention of becoming food to other animals.
Taking into account the West African Gaboon viper's biology, velvet black colouration suggests to be a tool for a perfect camouflage. The disruptive geometrical colouration pattern of pigment based colours conceals the body contours and makes the snake on the ground of the forest indistinguishable. Such colouration was interpreted as common concealing pattern in large stationary snakes73. In addition, the West African Gaboon viper is camouflaged by areas with alternating reflectance due to different microornamentation at the scale surfaces, the obliterative shading. This pattern of alternating reflectance coincides with that of colouration. Thus, the viper features black spots with low reflectance, that purport spatial depth and pale areas that reflects the incident light. This high-contrasting pattern is a perfect camouflage in the richly-structured forest ground with variations of light and shade originated by the canopy. Beside optical characteristics of skin and visual system of the observer, colour appearance of an animal also depends on the spectrum of ambient light7,74,75. In the West African Gaboon viper reflectance contrast of pale and black spots is higher for short wavelengths (corresponding with bluish and greenish colour) than for longer ones. Data about ambient illumination have been collected in numerous studies. Under the open sky, regardless whether cloudy or clear, radiance spectra are dominated for wavelengths longer than 500 nm76,77. Under these conditions differences in reflectance between black and pale spots would be rather low. However, considering the snake′s habitat, spectral reflectance characteristics of its skin are quite beneficial: Radiance spectra of forests at many continents show a radiance intensity peak at 550 nm (green), due to direct transmission and reflection of the canopy77,78. Under clear sky, woodlands and forests with larger gaps in their canopies shift the spectra of ambient light towards shorter wavelength (blue)77. Low sun angles at dusk and dawn in combination with the absence of clouds lead to deficiency of the wavelength range from 630 to 750 nm and consequently overrepresentation of bluish light and long wavelengths corresponding to the red colour. Although these spectral data77 do not include the viper′s African habitat, based on similarity of data in previously forest studies, the results can be presumed for the African rainforest. All mentioned spectra share a high contribution of short wavelengths. Especially this range is reflected differently by pale and black areas. This yields a high-contrast in reflectance, which camouflages the snake especially during ambushing in the evenings. But the system also provides high-contrasting appearance at day time in the greenish light of the forest or the bluish light of woodland and open anthropogenic vegetation.
In our measurements dorsal pale and black scales were transparent in the measured UV range, especially for shorter wavelengths. Because radiation of this spectral range was less reflected by these scales, it can be assumed that UV radiation is at least able to pass through the shed upper skin layers. For a species that lives at the bottom of forests and woodlands, where the main part of the destructive UV radiation is reduced; such properties may ensure sufficient UV supply for vitamin D3 synthesis. Our findings do not correspond with data on transmissivity78 and reflectance79,80 of the epidermis in other reptiles showing that reptile skin strongly absorbs the ultra violet and transmit the visible range of the solar spectrum. Comparisons with transmittance spectra of colubrid, boid and pythonid snakes show that even the epidermis of arboreal species is not nearly as transparent for ultra-violet and blocks less visible and infra-red radiation as the epidermis of the West African Gaboon viper78.
However, different characteristics of reflectance in dorsal and ventral skin of different lizard and snake species suggested that, beside solar protection, also thermoregulation and concealment are selective factors for epidermal reflectance in reptiles79,80.
The West African Gaboon viper′s low reflecting properties were preserved even when scale structuring was covered with gold-palladium. Thus, the structure based velvet black effect could also be potentially transferred to other materials. In science and technology such high-absorbing and low-reflecting surfaces are of prime importance and can be applied in many fields, such as solar thermal collectors or optical systems. Increasing interest in such materials is reflected in a growing number of recent publications about ultra-black surfaces that avoid any reflectance and absorb nearly any incident light81. The currently darkest commercially established surface is a nickel phosphorous alloy82. The low-reflecting properties of this material can be enhanced by modifications of the surface topography. Different phosphorous contents cause different surface structures appearing in the acid etching process. The reflectance can be less than 0.4%82. The currently darkest surface is made of vertically aligned carbon nanotubes (VACNT) which reflect 0.045% of incident light83. A large amount of recent publications studied the optical properties and optimization of fabrication of these materials84,85,86. The structures are fragile. But research continually creates new ultra-dark high absorbing materials such as silicon nanowires arrays (SiNWAs)87, laser textured metals88, nanoporous anodised aluminium oxide-coated polycarbonate surfaces89 and graphene sheet stacks90. Overall, these studies demonstrate the strong influence of surface topography on material′s reflectance and absorption. The surface topography of the West African Gaboon viper's velvet black scales resemble the ultralow reflectance ultrafast laser textured metal surfaces of Iyengar and his co-workers88. Both surfaces feature leaf-like structures or pillars88 in a similar range with an average diameter of about 20 μm and an average height of about 30 μm. Both materials feature nearly angle independent reflection characteristics. Further, in both cases the coverage with an absorbing layer decreases the reflectance.
Nonetheless, the West African Gaboon viper′s microornamentation might enhance the darkness of artificial materials. Especially varying orientation of the nanoridges could be an inspiration for engineering ultra-black designer. The microornamentation on the snake′s velvet black scales is a further example that the same physical law applies to both nature and technology and leads consequently to similar constructions. Regarding to the relation of durability and weight the fine shaped structures of the West African Gaboon viper are not inferior to artificial ultra-black surfaces considering that the snake slithers several month until the next shedding with its fine structured skin on the undergrowth.
Surface topography was examined in exuviae from two individuals of Bitis rhinoceros obtained from Tierpark Hagenbeck gGmbH, Hamburg, Germany, and from a private keeper. Microornamentation was determined from SEM images of the exuviae. Single scales and hand made cross-sections of scales were mounted on aluminum stubs by using double-sided carbon conductive tape (Plano, Wetzlar, Germany) and sputter coated in a BAL-TEC SCD 500 Sputter Coater using a BAL-TEC QSG 100 Quartz Film Thickness Monitor (Bal-tec AG, Balzers, Lichtenstein) with 15 nm thick gold-palladium. After preparation samples were studied in a scanning electron microscope Hitachi S-4800 (Hitachi High-Technologies Corp., Tokyo, Japan) at an accelerating voltage of 3 kV. Quantitative surface data were obtained from images with the free image processing program image J 1.44. Density of elevations at pale scale areas and leaf-like structures at black areas were measured from top view images. The height of elevations and leaf-like structures was determined from the cross-sections. Dimensions of ridges were measured from cross-sections and top view images. The density of the structures was determined of three scales per individual. For the height of the microstructures and the dimensions of the nanoridges, five values were taken from one scale. Five scales per individual were examined. Light microscopy images were taken with a Zeiss Axioplan (Carl Zeiss MicroImaging GmbH, Jena, Germany) with a camera (Zeiss AxioCam MRc, software Zeiss AxioVision 3.1, Carl Zeiss MicroImaging GmbH, Jena, Germany). Therefore manual sliced cross-sections of dorsal black scales and pale scales were mounted in water on a glass slide and covered by a cover slip.
For infrared imaging an exuvia of one individual was placed on a 2 cm thick polystyrene plate (heat insulator) at room temperature. IR images were taken with an IR camera (IR FlexCam® T with GTS Thermography Studio 4.7, GORATEC Technology GmbH, Erding, Germany) before, during and after a heat up process generated by a 10 min enduring irradiation with a 100 W light bulb (UV Reptile vital, Hobby, Dohse Aquaristik KG, Gelsdorf, Germany) at 20 cm distance.
Measurement of reflectance, scattering and transmittance
Optical characteristics of the snake epidermis were measured at the exuviae of one individual used for the SEM study. In 90° reflectance measurement a balanced deuterium tungsten halogen light source (DH-2000-BAL, Ocean Optics Inc, Dunedin, Florida, USA) produced light from ultraviolet to near infrared (wavelength range from 200 to 1100 nm). Light was guided to the surface through an optical fibre with the diameter of 200 μm. The fibre output was placed 2 mm above the scale surface. The reflected light was collected and directed to the monochromator (Ocean Optics Inc, Dunedin, Florida, USA) by an optical fibre. Data were recorded with the software Spectral Suite (Ocean Optics Inc, Dunedin, Florida, USA). With this arrangement the 90° reflectance spectra of ten dark dorsal, ten pale dorsal and ten ventral scales was determined.
The same measurements were done with scales sputter-coated with 15 nm thick layer gold-palladium. Sputter coating was done with the sputter coater described above. Placement of the scales above a dark chamber during experiment prevented detection of backscattered light which might potentially pass though the partially pellucid scales. The measured reflectance of the snake scales were presented in percents of the reflectance of the diffuse reflectance standard (reference white, WS-1-SS, Mikropack GmbH, Ostfildern, Germany), which was also measured ten times and then used for each incidence wavelength as reference value corresponding to 100% reflectance.
Transmission measurements were performed with the same setup. The scale was placed between the light source and the sensor. For this purpose, a glass fibre with a collecting lens was placed directly underneath the scale and connected to the collimator attached. The output fibre was placed 9 cm above the scale surface and supplied with an achromatic collimator lens. With this setup, transmission spectra of ten scales of each type, Au-Pd coated and uncoated dorsal black, dorsal pale and ventral scales were measured. Transmittance values were calculated as a ratio of the irradiance passing though the sample to the intensity of incident radiation. For the measurement of the angular dependence of reflectance, the output fibre was fixed at an angle of 45° and at a distance of 5 cm from the scale surface. The input fibre with a collimator lens was placed at a test angle at fixed distance of 13.5 cm from the scale on a guiding rail. Intensity of scattered light could be measured from different angles (0°–80°) (Fig. 5a). Reflection measurements were done with black and pale dorsal scales mounted on low-reflecting dark velvet oriented laterally (l) or rostro-caudally (rc) to the light source (Fig. 5c–f). The setup for other measurements was similar to the setup for the transmission measurements, except for spectral measurements for which the halogen light source was used.
Calculation of angle dependent light scattering
We compared our measured angle dependent reflectance with calculations for a model surface according to the Oren – Nayar model65, which is supported by experimental studies and is an established model in computer vision. This model describes diffuse reflection from the surfaces with Lambertian symmetric v-shaped cavities, whose upper edges are in a plain. The width of the cavities is assumed to be small in comparison to their length. Reflection from the both facets of each cavity is considered in the model. Surface roughness is modelled by the Gaussian distribution of facet slopes, which is defined by the mean μ and the standard deviation σ. In this model, the direction of illumination is defined by the angle θi to the surface normal and by the azimuth angle Φi to the x-axis in the surface plain. A detection direction is defined by the angle θr to the surface normal and by the azimuth angle Φr to the x-axis in the surface plain. According to Oren and Nayar65 the surface radiance is defined as follows: with the following coefficients: where α = max [θr, θi] and β = min [θr, θi], E0 is the irradiance when the facet is illuminated head-on, ρ is the fraction of incident energy reflected by the surface (albedo).
The interreflection between neighbours facets may be taken into account according: For the fit of our experimental angle dependent light scattering the interreflection was considered.
We thank Prof. Dr. Horst Bleckmann (Rheinische Friedrich-Wilhelms-Universität Bonn, Institut für Zoologie, Bonn, Germany), Prof. Dr. Helmut Schmitz (Rheinische Friedrich-Wilhelms-Universität Bonn, Institut für Zoologie, Bonn, Germany) and Frank Weinsheimer for supporting this study with advises and material. This work was partially supported by the German Science Foundation (DFG Graduiertenkolleg Bionik, GRK 1572) and by the Federal Ministry of Education, Science and Technology, Germany (BMBF project Biona 01RB0812) to SNG and GW.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/3.0/