To meet the global needs of tuberculosis (TB) control, a nanoELIwell device was developed as a multifunctional assay for TB diagnosis and drug susceptibility testing. The device integrates on-chip culturing of mycobacteria, immunoassay and high-resolution fluorescent imaging. Mycobacterium smegmatis and Mycobacterium kansasii were used as models of Mycobacterium tuberculosis to evaluate device integrity by using antigens, Ag85 and ESAT-6, as biomarkers. As a result, the nanoELIwell device detected antigens released from a single bacterium within 24–48-hour culture. Antimycobacterial drug-treated M. smegmatis showed significant decreased in Ag85 antigen production when treated with ethambutol and no change in antigen production when treated with rifampin, demonstrating drug susceptibility and resistance, respectively. The nanoELIwell assay also distinguished the ESAT-6-secreting M. kansasii from the non-ESAT-6-secreting M. simiae. The combination of microwell technology and ELISA assay holds potential to the development of a rapid, sensitive and specific diagnostics and susceptibility testing of TB.
Tuberculosis (TB), caused by Mycobacterium tuberculosis (M. tuberculosis), is among the most prevalent and deadliest infectious diseases world-wide, accounting for 9 million new cases and nearly 1.5 million deaths annually1. Currently, the time-consuming M. tuberculosis culture (4–8 weeks) remains the gold standard in the diagnosis of active TB disease as well as the identification of drug-resistance. Smear Acid-Fast Bacilli (AFB) microscopy is the most common, rapid and inexpensive screening test; however, it has only 53% sensitivity in diagnosis of active TB disease2. To date, a rapid and sensitive testing for active TB disease is still highly desirable. Comparative genomic studies have revealed two genes, ESAT-6 (6 kDa early secretory antigentic target gene) and CFP-10 (culture filtrate protein 10 gene) exclusively present in several pathogenic mycobacterial species, including M. tuberculosis and non-tuberculosis species (NTM, M. kansasii, M. szulgai, M. marinum and M. riyadhense)3 and consistently missing from all versions of attenuated vaccine strains (Bacillus Calmette-Guérin , BCG) and most NTM species3. High frequency circulation of CFP-10 and ESAT-6-specific Interferon-γ-secreting CD4 and CD8 T lymphocytes have been detected in patients with active TB disease and latent TB Infection4. Based on these findings, two ESAT-6/CFP-10-based immunodiagnostic kits, T-SPOT®. TB and QuantiFERON-TB, have been commercialized to detect M. tuberculosis infection. Both of these host-immunity-based tests, however, have failed in distinguishing between active TB disease and remote latent TB infection (LTBI) due to the immunologic response from long-lived human memory T cells5. The molecular basis of drug resistance in M. tuberculosis has been studied extensively, with the primary gene mutations associated with TB resistance to the five first-line drugs and the four second-line drugs already identified6. The convergence of global data on TB infections has shown, however, that these known gene mutations cannot explain all of the drug resistant phenotypes, indicating more drug-resistant gene mutations remain as yet undiscovered. Time-consuming culture-based testing remains the standard for M. tuberculosis drug resistance identification.
Microwell technology7,8,9,10 has been designed to better confine cells into nanoliter volumes for single cell analyses, including cytokine sensing11,12, measurements of antigen production rates13,14, multiple-antibody characterization15 and general single-cell trapping16,17, culture18,19 and content20,21,22. The enzyme-linked immunosorbent assay (ELISA) and microwell technologies have been combined to analyze the cytokine panels of immune cell response10,14,16,23. The major advantage of these combined technologies is to significantly increase the sensitivity and shorten the analytical time by confining the cytokines released from cultured cells within a nanoliter chamber for ELISA assay. In this study, we design a mycobacteria antigens-based nanoELIwell device for rapid mycobacterial identification and drug resistance screening. Our data has shown that this device can successfully culture mycobacteria in a nanoliter chamber and analyze the antigen secretion within 48 hours, which provides an ideal platform for further development of rapid diagnosis of active TB disease.
In order to effectively isolate and confine mycobacteria, the nanoELIwells were designed to have either a 50×50 μm (154,100 ELIwells/slide, ~0.025 nanoliter per well) or 100×100 μm (34,825 ELIwells/slide, ~0.1 nanoliter per well) dimensions, an area small enough to contain sufficient media for the culturing of one to a few bacteria per nanoELIwell (Figure 1). The device was fabricated using standard photolithography techniques24 that employs elastomeric poly(dimetylsiloxane) (PDMS) as the cast on silicon SPR mold, giving rise to a depth of approximately 10 μm that is enough to contain a single layer of bacteria. The length and width of the nanoELIwells can be sized accordingly to the experiment. As many as 30 small pieces of PDMS nanoELIwells, each under different conditions, can be mounted onto a single standard microscope glass slide for high throughput analyses. The glass slides are coated with epoxides and then functionalized with the desired antibodies 12 hours prior to bacterial culture. The mycobacteria were separated from the liquid culture media through multiple centrifugation/washing steps with fresh Middlebrook 7H9 Broth media prior to installation onto the nanoELIwell. This step was critical for the removal of any existing antigens from the media, resulting in a clear black background in the fluorescent assays. A 10 μL of Middlebrook 7H9 Broth media containing mycobacteria was added onto nanoELIwells, that were either pretreated with a fibronectin soak or a three minute oxygen plasma cleaning session. This step generated a hydrophilic surface for a better media installation into the nanoELIwells. Afterwards, an antibody-coated glass slide was mounted onto the nanoELIwells (Figure 1), then sandwiched by two acrylic plates with 4 screws (Figure 1A). The whole device was placed inside a biosafety container and cultured for 24–48 hours at 37°C. At the end of the bacteria culture, the sandwich was dismantled by carefully separating the nanoELIwells from the glass slide. The bacteria-containing nanoELIwells were then vacuum dried for scanning electron microscope (SEM) imaging, while the glass slides were assayed for fluorescence imaging. Herein, SEM imaging is to confirm bacterial presence, which will not be needed for future clinical applications. The experimental details are described in the Methods Section.
Evaluation of NanoELIwell device with M. smegmatis and antigen Ag85
To evaluate the function of the nanoELIwell in detection of mycrobacteria biomarkers, M. smegmatis, a non-pathogenic laboratory model for M. tuberculosis, and its secreted antigen Ag85 was first used in this study25,26. The culturing procedure and the device preparation are described in the Methods Section. The Ag85 antibody-coated glass slide was fluorescently imaged (Figure 2A and B) while the PDMS layer was characterized by using SEM techniques (Figure 2C). As shown in the fluorescent data (Figure 2A and B), each nanoELIwell has varying fluorescence signal intensities, indicating different bacterial loads and/or varying Ag85 antigen secretion rates in different nanoELIwells. The fluorescence intensities in nanoELIwells were correlated with the bacterial loads, which was evidenced by aligning the fluorescent images with the bacteria SEM images of each nanoELIwell (Figure 2C). To better understand the correlation between the bacterial load and the fluorescence signal density/intensity in the nanoELIwell, M. smegmatis culture specimens were diluted with a gradient of 1x (1.4×105 bacilli), 5x (2.8×104 bacilli) and 10x (1.4×104 bacilli) and were cultured in the nanoELIwells with Ag85 antibody-functionalized glass slide for 24 hours. As expected, the fluorescence intensities/densities on the glass slides were highly correlated with the bacterial loads in the nanoELIwells. Importantly, when a single bacterium was cultured and found in a single nanoELIwell by SEM (Figure 3C), its fluorescence signal was still detectable (Figure 3F), which clearly indicates the detection limit down to a single mycobacterium. A single-cell detection limit was further investigated against AFB microscopy (Figure 4). SEM images of a diluted sample of bacterial culture (200 bacilli over a 3×3mm scanned area) were collected (Figure 4A and B) and correlated with its fluorescence assay (Figure 4C) directly indicating single-cell analysis capabilities. This result was compared directly to AFB microscopy against both Morse fluorescence stain (Figure 4D) and Ziehl-Neelsen stain (Figure 4E) techniques, however, samples had to be concentrated by 100x in order for signal to be visible using the standard microscopy protocols. There is little to no signal present for the sample (Figure 4D, large oval) compared to the positive control (Figure 4D, lower left circle) using the Morse fluorescent stain; this method was concluded not to be the appropriate method for bacterial detection at this low of a concentration for M. smegmatis detection. The same sample concentration was used in Figure 4E using the Ziehl-Neelsen stain, a method previously shown to be an appropriate method for staining M. smegmatis27,28. A few bacilli were indeed visible under the 40x microscopic lens; however the blue color is not as easily detectable compared to our nanELIwell results. To demonstrate the nanoELIwell sensitivity against AFB standard protocols, the same sample was diluted by 100x (down to approximately 200 bacilli over the scanned area) and cultured using our nanoELIwell technology, fluorescently assayed and imaged (Figure 4F). As indicated, fluorescent signal was still present even at 100x dilution, therefore demonstrating approximately 100 fold increase in sensitivity to standard AFB microscopy. Furthermore, the bacteria are confined and localized within a 50x50 micron well using our nanoELIwell device, resulting in a clear signal readout. Though at a low bacterial concentration, the fluorescent signal is still visible for easy readout. Single-cell bacterial confinement allows for increase sensitivity in nanoELIwell assays.
Drug susceptibility and resistance testing by the nanoELIwell device
To evaluate the capability of the nanoELIwell device in the detection of mycobacterial drug susceptibility, M. smegmatis was pre-incubated for 1 hour in liquid media containing ethambutol (EMB, 8 μg/mL)29,30, then placed into nanoELIwells with the Ag85 antibody-coated glass slides. EMB-untreated M. smegmatis was mounted onto the same antibody-coated glass slide as the EMB-treated sample. After 24-hour culture, the untreated M. smegmatis showed substantial Ag85 antigen secretion with intensive fluorescence signals as expected (Figure 5A), while the EMB-treated M. smegmatis presented significantly weaker fluorescent signals (Figure 5B), indicating much lower production of the Ag85 antigens compared with the untreated bacteria. Ethambutol is a bacteriostasis drug that inhibits bacterial growth31,32. This becomes evident by the decrease in Ag85 production, as seen by a lower fluorescent signal in Figure 5B than Figure 5A. Drug resistance was then explored using rifampin (RIF, 1 μg/mL)33,34 following the same protocol as stated above, however a significantly more diluted sample was used for single cell analysis. The concentration of 1μg/mL was chosen for the experiment because the MIC of RIF has been previously reported to be 4 μg/mL35. A concentration above the MIC will result in a susceptible response from M. smegmatis. The RIF-untreated sample (Figure 5C) showed the same signal profile as the RIF-treated sample (Figure 5D), evidenced by the same fluorescent intensity/density; thus, indicating that M. smegmatis has a resistant response to RIF treatment at that concentration. This data clearly justified the applicable potential of the nanoELIwell device for rapid identification and screening for antimycobacteria drug resistance and susceptibility properties.
NanoELIwell assay for ESAT-6 secreting mycobacteria
The ESAT-6 antigen is secreted by several pathogenic mycobacterial species, including M. tuberculosis and M. kansasii. In this study, M. kansasii was utilized as a laboratory model of ESAT-6 secreting mycobacteria, while M. simiae (a non-ESAT-6 secreting species) was used as a control3,36. Both M. kansasii and M. simiae are slow-growing non-tuberculosis mycobacteria (NTM). The M. kansasii and M. simiae were cultured in two separate nanoELIwell devices with ESAT-6 antibody-functionalized glass slides for 48 hours. The fluorescence data revealed the secretion of ESAT-6 antigen from M. kansasii with intensive signals (Figure 6A), while no ESAT-6 antigens were detected from M. simiae (Figure 6E). The SEM images for M. kansasii (Figure 6 B–D) and M. simiae (Figure 6 F–H) showed the bacterial presence in both nanoELIwells. This data clearly indicates that the ESAT-6-based nanoELIwell device is able to identify ESAT-6 secreting mycobacteria within a short culture time, which holds a great potential to develop a rapid screen test for active TB disease with a higher sensitivity and specificity compared with the traditional AFB smear microscopic test.
TB, especially drug resistant TB disease, remains on the top of public health concerns globally. Rapid identification and drug susceptibility testing of TB disease is one of the priorities among global TB control efforts. Our study aims to meet these needs by utilizing latest microwells and immunoassay technologies. Results from this study has shown that the nanoELIwell device, designed by combining microwells and ELISA technologies, successfully integrates four advantages together, including rapid culturing of slow-growing mycobacteria, a high specificity with antigen-based immunoassay, a high sensitivity (single mycobacterium detection) with high-resolution fluorescence scanning of up to 154,100 ELIwells per slide and a rapid screening of drug resistance/susceptible of mycobacteria. These advantages hold a great potential towards the development of a high throughput/automatic identification assay of active TB disease and anti-TB-drug resistance/susceptibility.
A limitation of this ESAT-6-based nanoELIwell is that several pathogenic mycobacteria species secrete ESAT-6 antigen, which may lower the specificity for TB diagnosis. M kansasii, the most common ESAT-6-releasing NTM can cause a chronic pulmonary infection that resembles pulmonary tuberculosis. M. kansasii infection is the second-most-common nontuberculous opportunistic mycobacterial infection associated with AIDS, surpassed only by M. avium complex (MAC) infection37,38. Additional methods, e.g. 16S rRNA gene sequence analysis will be needed for species identification of pathogenic mycobacteria in the immunocompromised patients. However, in countries with high TB prevalence, like China, the M. kansasii accounts for approximate 0.12% of pulmonary TB suspects without HIV/AIDS39. Therefore, the ESAT-6-based nanoELIwell assay still has a relatively higher specificity compared with the conventional TB diagnostic assays. Further clinical evaluation of the nanoELIwell device with M. tuberculosis will be able to confirm its capability and lead to applications in diagnostic practice.
SuperEpoxy2, Protein Printing Buffer, Washing Buffer, Rinsing Buffer, Reaction Buffer, BlockIT and the Microarray High-Speed Centrifuge used for microarray analysis were purchased from ArrayIt (Sunnyvale, CA, USA). The hybridization chambers used for antibody loading were purchased from Corning Incorporated (Lowell, MA, USA). Megaposit SPR 220-7 positive photoresist and Microposit MF-CD-26 Developer were obtained from Rohm and Haas Electronic Materials (Midland, MI, USA). RTV 615 poly(dimetylsiloxane) (PDMS) were purchased from Momentive (Columbus, OH, USA). All antibodies (ESAT-6, AG85 and Mouse IgG-Cy3) were purchased from Abcam (Cambridge, MA, USA). High resolution photomasks were designed using AUTOCAD by Autodesk (San Rafeal, CA, USA) and were printed onto high-resolution chrome transparencies by Photo-sciences Incorporated (Torrance, CA, USA). Trimethylchlorosilane (TMCS), hexamethyldisilazane (HMDS) and AFB control and test slides were purchased from Fischer Scientific (Pittsburg, PA, USA). Lowenstein-Jensen agar slants, Middlebrook 7H9 Broth media, Ziehl-Neelsen stain kit and Morse stain kit, ethambutol and rifampin were purchased from BD Biosciences (Sparks, MD, USA). M. smegmatis was purchased from ATCC (Manassas, VA, USA). M. kansasii and simiae were from Molecular TB Laboratory, Department of Pathology and Genomic Medicine, The Methodist Hospital Research Institute (Houston, TX).
The 38,525 (100 μm x 100 μm) and 154,100 (50 μm x 50 μm) nanoELIwell arrays were generated by using AutoCAD (AutoDesk) and printed onto mask transparencies. Based on the standard rapid prototyping techniques40, The masters were fabricated by using hexamethyldisilazane-treated silicon wafers that was spin coated (1500 rpm, 40 s) with Megaposit SPR 220-7 positive photoresistant materials, up to a 10-μm thickness. The silicon wafers were soft baked and irradiated with UV light rendering the exposed photoresistant materials soluble in Microposit MF-CD-26 Developer. After washing and drying, the silicon masters were treated with an anti-adhesive agent, trimethylchlorosilane (TMCS), via vapor reaction for one hour. NanoELIwells were prepared from RTV 615 poly(dimetylsiloxane) (PDMS) using soft photolithography techniques24. The base and curing agents were mixed (10:1) by weight, degassed in a vacuum chamber and cured (80°C for 1 hour). The nanoELIwell arrays were cut and removed from the masters directly before experimentations.
Functionalization of capture antibody on glass surface
The SuperEpoxy 2 epoxide-coated glass slides were incubated with 100 μL of 2 μg/μL antibodies suspended in Protein Printing Buffer via a hybridization chamber at 4°C overnight. The following day, the functionalized slides were washed with Washing Buffer and Rinsing Buffer before incubating in 10 mL Blocking Buffer at room temperature for 4 hours. After blocking, the slides were washed again and rinsed before bacterial loading and culturing.
Bacterial loading and culturing
The nanoELIwells were either oxygen plasma treated or fibronectin soaked directly before bacterial loading. Depending on the experiment, the PDMS can be guillotined down to the desired size for high-throughput assays in as many as 1 to 30 different conditions all on a single functionalized glass slide.
In a typical on-chip test, a 10 μL-culture sample of mycobacterium was collected and centrifuged. The bacteria were washed 3 times with fresh Middlebrook 7H9 Broth media to remove the existing antigens. Afterwards, 3–10 μL of bacterial re-suspensions were dropped directly into the center of the pretreated nanoELIwells and allowed the bacteria to settle into the wells for 3 minutes, before the functionalized glass slides were then placed on top of the nanoELIwells. The nanoELIwells and glass slides were sandwiched between two acrylic plates and held by 4 screws. The sandwiched devices were placed into humidified culture plate and cultured in an incubator at 37°C (5% CO2) for 24–48 hours.
Each sandwiched devices were carefully dismantled by lifting the glass slides off of the nanoELIwells without disturbing the cultured bacteria. The nanoELIwells released from the assay were dried under a vacuum for SEM analysis. The glass slides were washed and rinsed (ArrayIt Wash and Rinse Buffer) and blocked (BlockIt) for 2 hours at room temperature. This second blocking procedure with blocking buffer was applied on the glass slide. Without this second blocking step, the background might be noticeably higher. The glass slides were subsequently washed and rinsed before incubation with 2.5 μg of primary antibodies specific to the target antigen in 10 mL Reaction Buffer at room temperature for 2 hours. Another round of wash and rinse were conducted before the final incubation of the glass slides with 2.5 μg of secondary antibodies in 10 mL Reaction Buffer at room temperature for 2 hours. The slides were then subjected to the final round of wash and rinse and spun dried using a Microarray High-Speed Centrifuge. Fluorescence results were collected using a GenePix 4000B Microarray Scanner. The PDMS nanoELIwells (after drying) were visually aligned with the fluorescence images in order to better identify the area of interest for SEM imaging.
SEM imaging and bacterial counting
The nanoELIwells were guillotined into smaller pieces (if needed), sputter coated with 15 nm Au and mounted onto stubs before imaging. A typical 3x3 mm or 5x5 mm area is scanned by capturing zoomed-in images of the wells for bacterial counting. The entire area of interest containing the bacterial sample is scanned resulting in 100 s of images per assay. These zoomed-in images are manually stitched together, as shown in Figure S1, before counting. The bacterial concentrations are reported as bacterial numbers per sample.
Organization, W. H. Global Tuberculosis Control: WHO Report 2011. WHO Library Cataloguing-in-Publication Data (2011).
Laserson, K. F. et al. Improved sensitivity of sputum smear microscopy after processing specimens with C18-carboxypropylbetaine to detect acid-fast bacilli: a study of United States-bound immigrants from Vietnam. Journal of clinical microbiology 43, 3460–3462 (2005).
van Ingen, J., de Zwaan, R., Dekhuijzen, R., Boeree, M. & van Soolingen, D. Region of difference 1 in nontuberculous Mycobacterium species adds a phylogenetic and taxonomical character. Journal of bacteriology 191, 5865–5867 (2009).
Wu-Hsieh, B. A. et al. Long-lived immune response to early secretory antigenic target 6 in individuals who had recovered from tuberculosis. Clin Infect Dis 33, 1336–1340 (2001).
Doherty, T. M. et al. Immune responses to the Mycobacterium tuberculosis-specific antigen ESAT-6 signal subclinical infection among contacts of tuberculosis patients. Journal of clinical microbiology 40, 704–706 (2002).
Sandgren, A. et al. Tuberculosis drug resistance mutation database. PLoS medicine 6, e2 (2009).
Love, J. C., Ronan, J. L., Grotenbreg, G. M., van der Veen, A. G. & Ploegh, H. L. A microengraving method for rapid selection of single cells producing antigen-specific antibodies. Nature biotechnology 24, 703–707 (2006).
Ochsner, M. et al. Micro-well arrays for 3D shape control and high resolution analysis of single cells. Lab on a chip 7, 1074–1077 (2007).
Moeller, H. C., Mian, M. K., Shrivastava, S., Chung, B. G. & Khademhosseini, A. A microwell array system for stem cell culture. Biomaterials 29, 752–763 (2008).
Khademhosseini, A. et al. Cell docking inside microwells within reversibly sealed microfluidic channels for fabricating multiphenotype cell arrays. Lab on a chip 5, 1380–1386 (2005).
Seo, J. H., Chen, L. J., Verkhoturov, S. V., Schweikert, E. A. & Revzin, A. The use of glass substrates with bi-functional silanes for designing micropatterned cell-secreted cytokine immunoassays. Biomaterials 32, 5478–5488.
Tuleuova, N. & Revzin, A. Micropatterning of Aptamer Beacons to Create Cytokine-Sensing Surfaces. Cellular and molecular bioengineering 3, 337–344 (2010).
Park, S., Han, J., Kim, W., Lee, G. M. & Kim, H. S. Rapid selection of single cells with high antibody production rates by microwell array. J Biotechnol 156, 197–202 (2011).
Han, Q., Bradshaw, E. M., Nilsson, B., Hafler, D. A. & Love, J. C. Multidimensional analysis of the frequencies and rates of cytokine secretion from single cells by quantitative microengraving. Lab on a chip 10, 1391–1400 (2010).
Jin, A. et al. A rapid and efficient single-cell manipulation method for screening antigen-specific antibody-secreting cells from human peripheral blood. Nat Med 15, 1088–1092 (2009).
Kim, S. H., Yamamoto, T., Fourmy, D. & Fujii, T. An electroactive microwell array for trapping and lysing single-bacterial cells. Biomicrofluidics 5, 24114 (2011).
Rettig, J. R. & Folch, A. Large-scale single-cell trapping and imaging using microwell arrays. Analytical chemistry 77, 5628–5634 (2005).
Lecault, V. et al. High-throughput analysis of single hematopoietic stem cell proliferation in microfluidic cell culture arrays. Nature methods 8, 581–586 (2011).
Guldevall, K. et al. Imaging immune surveillance of individual natural killer cells confined in microwell arrays. PloS one 5, e15453 (2010).
Heyries, K. A. et al. Megapixel digital PCR. Nature methods 8, 649–651 (2011).
Lee, W. C., Rigante, S., Pisano, A. P. & Kuypers, F. A. Large-scale arrays of picolitre chambers for single-cell analysis of large cell populations. Lab on a chip 10, 2952–2958 (2010).
Lee, H. J., Kim, H. S., Kim, H. O. & Koh, W. G. Micropatterns of double-layered nanofiber scaffolds with dual functions of cell patterning and metabolite detection. Lab on a chip 11, 2849–2857 (2011).
Han, Q. et al. Polyfunctional responses by human T cells result from sequential release of cytokines. Proceedings of the National Academy of Sciences of the United States of America 109, 1607–1612 (2012).
McDonald, J. C. & Whitesides, G. M. Poly(dimethylsiloxane) as a material for fabricating microfluidic devices. Accounts of Chemical Research 35, 491–499 (2002).
Belisle, J. T. et al. Role of the major antigen of Mycobacterium tuberculosis in cell wall biogenesis. Science New York, N.Y 276, 1420–1422 (1997).
Wiker, H. G. & Harboe, M. The antigen 85 complex: a major secretion product of Mycobacterium tuberculosis. Microbiol Rev 56, 648–661 (1992).
Lamrabet, O., Mba Medie, F. & Drancourt, M. Acanthamoeba polyphaga-enhanced growth of Mycobacterium smegmatis. PloS one 7, e29833.
Dhiman, R. K. et al. Lipoarabinomannan localization and abundance during growth of Mycobacterium smegmatis. Journal of bacteriology 193, 5802–5809.
Takayama, K. & Kilburn, J. O. Inhibition of synthesis of arabinogalactan by ethambutol in Mycobacterium smegmatis. Antimicrobial agents and chemotherapy 33, 1493–1499 (1989).
Takayama, K., Armstrong, E. L., Kunugi, K. A. & Kilburn, J. O. Inhibition by ethambutol of mycolic acid transfer into the cell wall of Mycobacterium smegmatis. Antimicrobial agents and chemotherapy 16, 240–242 (1979).
Rapaport, E., Levina, A., Metelev, V. & Zamecnik, P. C. Antimycobacterial activities of antisense oligodeoxynucleotide phosphorothioates in drug-resistant strains. Proceedings of the National Academy of Sciences of the United States of America 93, 709–713 (1996).
Lu, T. & Drlica, K. In vitro activity of C-8-methoxy fluoroquinolones against mycobacteria when combined with anti-tuberculosis agents. The Journal of antimicrobial chemotherapy 52, 1025–1028 (2003).
Chakravorty, S. et al. Rifampin resistance, Beijing-W clade-single nucleotide polymorphism cluster group 2 phylogeny and the Rv2629 191-C allele in Mycobacterium tuberculosis strains. Journal of clinical microbiology 46, 2555–2560 (2008).
Ren, H. & Liu, J. AsnB is involved in natural resistance of Mycobacterium smegmatis to multiple drugs. Antimicrobial agents and chemotherapy 50, 250–255 (2006).
Hetherington, S. V., Watson, A. S. & Patrick, C. C. Sequence and analysis of the rpoB gene of Mycobacterium smegmatis. Antimicrobial agents and chemotherapy 39, 2164–2166 (1995).
Shen, G. H., Chiou, C. S., Hu, S. T., Wu, K. M. & Chen, J. H. Rapid identification of the Mycobacterium tuberculosis complex by combining the ESAT-6/CFP-10 immunochromatographic assay and smear morphology. Journal of clinical microbiology 49, 902–907 (2011).
Glassroth, J. Pulmonary disease, due to nontuberculous mycobacteria (vol 133, pg 243, 2008). Chest 133, 1291–1291 (2008).
Glassroth, J. Pulmonary disease due to nontuberculous mycobacteria. Chest 133, 243–251 (2008).
Jing, H. et al. Prevalence of nontuberculous mycobacteria infection, China, 2004–2009. Emerging infectious diseases 18, 527–528 (2012).
Duffy, D. C., McDonald, J. C., Schueller, O. J. A. & Whitesides, G. M. Rapid prototyping of microfluidic systems in poly(dimethylsiloxane). Analytical chemistry 70, 4974–4984 (1998).
We are grateful for funding supports from CPRIT-R1007 and DOD W81XWH-11-02-0168-P8 (PI: Lidong Qin) and NIH RO1AI075465 (PI: Xin Ma). We would like to thank TMHRI SEM Core for instrument support.
The authors declare no competing financial interests.
Electronic supplementary material
About this article
Cite this article
Nguyen, Y., Ma, X. & Qin, L. Rapid identification and drug susceptibility screening of ESAT-6 secreting Mycobacteria by a NanoELIwell assay. Sci Rep 2, 635 (2012). https://doi.org/10.1038/srep00635
BMC Biotechnology (2014)