Background & Summary

A complete genome sequence provides an essential infrastructure to study an organism at the molecular level. It does not only represent an entire set of genetically inherited information, but also a coordinated system to describe genomic entities, such as nucleotide polymorphisms, genes, and regulatory elements. The representation of genome entities along a genomic reference is termed genome annotation1. The Genome Reference Consortium has been providing a variety of reference genome assemblies, updated in a timely manner in order to reflect the outcomes of recent research2. The latest assemblies available for human and mouse are versioned as GRCh38/hg38 and GRCm38/mm10. Recent efforts to improve the genome annotations based on the current assemblies were consequently carried, including the update of RefSeq3 and GENCODE transcripts4.

The FANTOM (Functional ANnoTation Of Mammalian genomes) project was launched to provide functional annotation for mammalian genomes, in particular focusing on transcriptome profiles5. The fifth edition of the FANTOM project (FANTOM5) profiled genome-wide transcription start sites (TSSs) in mammalian genomes by using CAGE (Cap Analysis of Gene Expression) with single-molecule sequencers (HeliScope); it then revealed a promoter-level expression atlas across mammalian primary cells, tissues, cell lines and time course samples, as well as a transcribed enhancer atlas68. In the CAGE method, cDNA fragments with a cap structure at their 5′-end are sequenced and the sequenced reads are aligned to a reference genome to count frequencies of transcription initiation. The resulting profiles represent activities of transcription initiation (TSS activities) at a single base-pair resolution across the entire genome9. These profiles were then used to define TSS peaks representative of promoters. Because the reference genome assemblies are universal and publicly shared, TSS activities can be measured on a common coordinate system.

In the original publications of the FANTOM5 papers, the GRCh37/hg19 human and NCBI37/mm9 mouse genome assemblies were used. Here we reprocessed the FANTOM5 data to make it available on the current assemblies GRCh38/hg38 and GRCm38/mm10. We remapped individual CAGE reads, to fully benefit of improvements such as correction of erroneous genome sequences. In contrast, we converted the genomic coordinates of the CAGE peaks into the current assemblies by liftOver tool10, so that we can easily make corresponding between the reprocessed CAGE peaks and the existing FANTOM5 resources across the assemblies. Following the conversion, we added new CAGE peaks introduced in the latest genome assemblies, for example, ones for newly introduced genes. For this purpose, we used the result of peak-calling by the same method as reported in the original report8 based on the realigned CAGE reads with the latest genome assemblies (Data Citation 1), and chose non-overlapped CAGE peaks in the result to merged with the converted CAGE peaks.

Unique identifiers were assigned to the CAGE peaks to provide the consistent reference to the CAGE peaks even after future updates. Majority of the peaks were successfully converted, and a few unexpected conversions were manually corrected. As a consequence, expression and gene annotations of the CAGE peaks were updated (Fig. 1). The reprocessed data of the FANTOM5 human and mouse CAGE datasets (Data Citations 2,3,4,5,6,7,8,10) are publicly available from the FANTOM5 data web site (http://fantom.gsc.riken.jp/5/datafiles/reprocessed/), LSDB Archive (Data Citation 11) and Figshare (hg38 (Data Citation 12) and mm10 (Data Citation 13)).

Figure 1: Work flow of FANTOM5 data re-processing.
figure 1

The figure describes the reprocessing of the FANTOM5 data. The workflow encompasses three processes; CAGE reads realignment (1), CAGE peaks liftOver (2) and CAGE peaks call (3). The source datasets are in (GRCH37/hg19) and (NCBI37/mm9). The target assembly is (GRCH38/hg38) and (GRCm38/mm10). CAGE reads realignment result in mapped CAGE peaks, CAGE peaks liftOver result in two sets of CAGE peaks (mapped and unmapped). And the CAGE peaks call result in new CAGE peaks in the latest genomes. Process (1) and (2) are followed by quality checking (QC). The QC filtered the mapped CAGE peaks into fair and problematic CAGE peaks. The set of problematic and dropped CAGE peak regions are investigated and manually curated. The new CAGE peaks from (3) are intersected with the fair CAGE peaks using bedtools (intersectbed) to define non-overlapped CAGE peaks (new CAGE peaks). The fair and new CAGE peaks are annotated with the latest gene and transcript models and their expression tables are calculated.

Methods

Realignment of CAGE reads

The FANTOM5 CAGE reads (Data Citations 2,3,4,5,6,7,8,10) were realigned by Delve version 0.95 with the GRCh38/hg38 and GRCm38/mm10 genome assemblies following the same procedure to the previous report68,11. The genome assembly files (FASTA format) were downloaded from the UCSC genome browser database12, in particular the files under ‘bigZips’ directories ((Data Citation 14) for human and (Data Citation 15) for mouse) were used and only primary chromosomes (chr1..22, X, Y, M for human and chr1..19, X, Y, M for mouse) were considered as a reference in the realignment. The same criteria detailed in the original report8, mapping quality >20 and sequence identity 85%, were employed for selecting successful alignments. The former threshold indicates that CAGE reads were discarded if they were aligned with two or more loci and it was difficult to determine the originating locus uniquely.

Conversion of the CAGE peaks genomic coordinates

The genomic coordinates of the original CAGE peaks (hg19 (Data Citation 16) and mm9 (Data Citation 17); or (Data Citation 11)) were computationally converted to the latest genome assemblies, followed by manual curation (Fig. 1). First we applied a software utility to convert between genomes, liftOver10, with option --minMatch=1 and the chain files from hg19 to hg38 (Data Citation 18) and from mm9 to mm10 (Data Citation 19). A few of the CAGE peaks couldn’t be located in the latest genome assemblies (termed ‘dropped’), where the ratios of dropped peaks were less than 0.1% (Table 1).

Table 1 CAGE peaks counts.

Next we examined whether the mapped peaks were supported by the presence of any realigned CAGE reads, to confirm that the converted locations still have experimental evidences. We found that 335 and 76 peaks for human and mouse respectively had no support, and excluded them from downstream analysis by classifying them as ‘problematic’. We also examined internal overlap within the converted peaks, since they are not supposed overlap each other, based on their definition8. We found ten peaks overlapping in four loci only on hg38, which were caused by the fusion of originally distinct genomic regions or by unintentional stretch of a single CAGE peak after the conversion. We excluded four peaks, one peak for each overlapping locus, and classified them as ‘problematic’ as well (Table 2).

Table 2 Manual correction of the genomic coordinates.

Lastly we examined whether the length of CAGE peaks was altered after the conversion to the latest genomic coordinates. We found eight peaks whose lengths were changed more than one base due to insertions and/or deletions in the updated genome assemblies. We manually updated the genomic coordinates of two out of eight CAGE peaks, to make them consistent with the CAGE read realignments (Table 2). As a result, we successfully generated a clean set of CAGE peaks (called ‘fair’) on the latest genome assemblies, representing more than 99% of the original ones (Table 1).

Integration of newly identified CAGE peaks in the latest genome assemblies

We complemented the converted CAGE peaks with a new set of CAGE peaks identified to the same method to the previous study (DPI, decomposition-based peak identification)8 based on the realigned CAGE reads with the latest genome assemblies (Data Citation 1). To identify their overlaps, we used intersectBed command with option -s from Bedtools13. Non-overlapped CAGE peaks identified by DPI were merged with the converted CAGE.

Assignment of accession numbers to the CAGE peaks

Identifiers assigned to the CAGE peaks (CAGE peak ID) were formatted based on their genomic coordinates (Table 3). To have a consistent way to refer individual peaks, we assigned accessions to them, in the form of ‘hg_(serial_num).(version_num)’ and ‘mm_(serial_num).(version_num)’ for human and mouse, respectively. This enabled us to refer them independently of their genome assemblies and their coordinates, with explicit indication of versions. For backward traceability, the new ID is concatenated with the original ID by semicolon (;) in the final files. To avoid confusion of genome versions, we added ‘hg19’ or ‘mm9’ as prefix of the original ID.

Table 3 The naming scheme of the CAGE peaks before and after reprocessing.

Re-annotation of CAGE peaks with the latest gene and protein databases

To take advantage of recent genome annotations, in particular long-noncoding RNAs5, we updated the association of the CAGE peaks with genes, transcripts, and proteins. The process consists of the two steps: (i) associate CAGE peaks to transcripts, and subsequently to genes and proteins (ii) assign human-readable short names. The first step, association with transcripts, was achieved by finding the TSS of transcripts within 500 bp flanking region of the CAGE peak (flanking regions are limited to 50 bp for 5′-end not derived from transcription initiation by RNA Polymerase II, such as small nucleolar RNA), choosing the nearest transcripts, and associating CAGE peaks to gene and protein models based on the nearest transcripts. In the second step, human-readable short names were assigned in the same form to the original ones, ‘p<serial>@<HGNC/MGI/Entrez Gene name>’. Serial numbers were chosen not to conflict with already existing names, so that all names are unique not only within the current genome assembly but also across genome assemblies of a species.

We used the following annotation databases for re-annotation as of March 31, 2016: GENCODE4, Entrez Gene14, HUGO Gene Nomenclature Committee (HGNC) database15, the Mouse Genome Database (MGD)16 and the UCSC Genome Browser12. Transcript sets are from GENCODE (human/mouse), RefSeq (human/mouse), UCSC genes (human/mouse) and mRNAs in the UCSC genome browser (human/mouse). Gene models used for the annotation are from HGNC (human), MGI (mouse) and Entrez Gene (human/mouse). The protein sets are from UniProt (human/mouse).

Recalculation of promoter-level expression tables

As in the previous report8, we counted the read counts under the CAGE peaks on the current genome assemblies. The counts were normalized as TPM (tags per million) after scaling by normalization factors calculated by RLE (Relative Log Expression) method17,18.

Code availability

  1. 1

    The latest version of the source code of the Delve mapper is openly available from http://fantom.gsc.riken.jp/5/suppl/delve/delve-0.95.tgz.

  2. 2

    The latest version of the source code of the DPI is openly available from https://github.com/hkawaji/dpi1.

Data Records

The original data of raw reads (CAGE tags) for human and mouse is available from the DDBJ Sequence Read Archive (DRA) (Data Citations 2,3,4,5,6,7,8,10). The human reprocessed dataset is available at (Data Citation 12) and mouse reprocessed dataset is available at (Data Citation 13). The results of realignment of CAGE reads in BAM format (.bam) with their index files (.bai) are located under ‘basic/*’ directories at http://fantom.gsc.riken.jp/5/datafiles/reprocessed/ or in LSDB Archive (Data Citation 11). The reprocessed CTSS file of each sample in BED format is also located in the same directory.

The genomic coordinates of the reprocessed CAGE peak regions in the BED format are in (Data Citations 11,12,13). The tab-delimited annotation files of CAGE peaks are in (Data Citations 11,12,13). The expression profiles of CAGE peaks in OSC table (Order Switchable Column table) (https://sourceforge.net/projects/osctf/) can be found in (Data Citations 11,12,13).

Sample metadata is stored in sample and data relationship format (SDRF)19 at the ‘basic/’ directory at http://fantom.gsc.riken.jp/5/datafiles/reprocessed/.

Technical Validation

Number of realigned CAGE reads

The numbers of CAGE reads successfully aligned to the genome assemblies are shown in (Table 4). Slightly less number of CAGE reads were successfully aligned with the current genome assemblies than the original ones for both human and mouse. This can be explained by the incorporation of complex and duplicated regions into the current genome assemblies, which made uniquely aligned CAGE reads in the original assemblies as aligned with multiple locations in the current assemblies. Overall, very similar number of CAGE reads are available before and after the realignments.

Table 4 CAGE read counts.

Number of converted CAGE peaks

The numbers of CAGE peaks converted from the original assemblies are shown in (Table 1). The majority of the peaks, more than 99%, were classified into the category ‘fair’. The detailed numbers of problematic and dropped peaks are shown in (Tables 5,6,7,8). We further inspected the problematic CAGE peaks, and found that the CAGE reads corresponding to the original peak were discarded due to low mapping quality (that is, aligned to multiple regions). This is again likely due to duplicated genomic regions that were introduced in hg38 and mm10.

Table 5 The problematic peaks in hg38.
Table 6 The problematic peaks in mm10.
Table 7 The dropped peaks from hg19.
Table 8 The dropped peaks from mm9.

Comparison of the fair CAGE peaks and DPI-called CAGE peaks

We compared the converted CAGE peaks in the ‘fair’ category with the peaks identified based on the read realignments with the latest genome assemblies (DPI CAGE peaks). The number of their overlaps (Table 9) shows that approximately 95% of a peak set is covered by the other. This result indicates high concordance of the converted CAGE peaks to the ones based on realignments, and underline a certain amount of additional CAGE peaks, ~8,600 and ~5,700 in human and mouse, were newly included in the CAGE peak set provided here.

Table 9 Number of new CAGE peaks identified by peaks calling and their overlap with the converted CAGE peaks.

Expressions of the CAGE peaks

Next, we examined expressions of the CAGE peaks on the original genome assemblies and the current ones (Fig. 2). Their expression levels are tightly consistent across the assemblies, as correlation coefficients are more than 0.99, using Spearman’s and Pearson’s correlation for human and mouse. At the same time, the scatter plot indicates a limited number of peaks that were quantified differently. For the majority of those inconsistent peaks, the expression levels were low, very likely due to the incorporation of duplicated regions in the current assemblies.

Figure 2: Correlation between the CAGE tags count of the aligned CAGE reads and the liftOver CAGE peaks.
figure 2

The scatterplot shows the correlation between the number of tag count within the regions of aligned CAGE reads and the liftOver CAGE peaks. [2a] human and [2b] mouse.

Annotation of the CAGE peaks

We compared CAGE peak annotations based on the latest genomes (hg38/mm10) with the original ones based on hg19/mm9. First, we compared the number of CAGE peaks that was associated with any transcripts, genes in Entrez Gene (human and mouse), HGNC (human), and proteins in UniProt (Table 10). The numbers of associated UniProt proteins were almost similar. However, the number of associated transcripts and genes were increased from the original ones by 15–20%. This may reflect the growing pace of the gene annotations in public databases, in particular non-coding RNAs and complex isoforms of protein coding genes. Next, we compared the number of CAGE peaks classified based on gene categories as defined in Entrez Genes (Table 11). The number of CAGE peaks with protein coding genes increased in the same ratio as with all genes. On the other hand, CAGE peaks with non-coding genes were drastically increased, which may reflect the recent numerous findings in non-coding RNA studies5.

Table 10 Counts of CAGE peaks associated with transcripts, genes and proteins.
Table 11 Number of peaks associated with Entrez Gene categories.

Usage Notes

In addition to the data files of realignments and converted CAGE peaks described in data citation, the data are made accessible in TET (Table Extraction Tool)20, SSTAR (Semantic catalog of Samples, Transcription initiation And Regulators)21, ZENBU22, and UCSC genome browser via data hub23.

Additional Information

How to cite this article: Abugessaisa, I. et al. FANTOM5 CAGE profiles of human and mouse reprocessed for GRCh38 and GRCm38 genome assemblies. Sci. Data 4:170107 doi: 10.1038/sdata.2017.107 (2017).

Publishers note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.