Biophysical flocculation reduces variability of cohesive sediment settling velocity

Biophysical cohesion, introduced predominantly by Extracellular Polymeric Substances (EPS) during mineral ﬂ occulation in subaqueous environments, plays important role in morpho-dynamics, biogeochemical cycles and ecosystem processes. However, the mechanism of how EPS functioning with cohesive particles and affects settling behaviors remain poorly understood. We measure initial ﬂ occulation rate, ﬂ oc size and settling velocity of mineral and arti ﬁ cial EPS (Xanthan gum) mixtures. Combining results from these and previous studies demonstrate coherent intensi ﬁ cation of EPS-related ﬂ occulation compare with those of pure mineral and oil-mineral mixtures. Importantly, the presence of EPS fundamentally changes ﬂ oc structure and reduces variability of settling velocity. Measured data shows that ratios of micro ﬂ oc and macro ﬂ oc settling velocity for pure mineral ﬂ ocs is 3.9 but greatly reduced to a lowest value of 1.6 due to biological EPS addition. The low variability of settling velocity due to EPS participation explains the seemingly inconsistent results previously observed between ﬁ eld and laboratory studies.


M
ud in subaqueous environment generally consists of organic materials (e.g., extracellular polymeric substances (EPS) 1 ) and inorganic mineral clays 2 .They are transported as flocs with a wide variety of physical properties, such as settling velocity and porosity/density that are of interest in understanding coastal and estuarine morphodynamics 3,4 , biogeochemical nutrient cycling 5,6 , carbon and pollutant transport 7,8 , and ecosystem functions 9 .A good understanding of flocculation dynamics is also crucial to predict the impact of erosion and sedimentation when being confronted with sea level change, land-use shortage, waterway navigability, and scour around engineering infrastructure 10,11 .
Particle settling velocity is one of the most important quantity in the study of sediment transport [12][13][14] .Due to flocculation, estimating settling velocity of cohesive sediment is difficult and it is usually measured by video cameras or laser diffraction devices [15][16][17] .Most laboratory studies focus on inorganic clay/silt particles that show large variability of measured settling velocity as function of floc size and mineral types [18][19][20] .On the contrary, many field observations in coastal environments have reported that a floc settling velocity of around 1 mm•s −1 is a robust estimate 21,22 implying a rather low variability of floc settling velocity 23,24 .In fluvial environment, Lamb et al. 25 report that clay minerals and silt particles may settle as flocs with a nearly uniform settling velocity of 0.34 mm•s −1 .They further conjecture that the reason why floc can form in freshwater is possibly due to high organic content via sticky EPS.
Microbial EPS has been considered one of the natural flocculants 26 , however, its effect on settling velocity of floc are not fully understood 27 .EPS is products of biochemical secretions and can make up as much as 50~90 % of the organic matter content of microbial aggregates 28,29 .EPS has distinctive characteristics in composition and densities that are different from the minerals or other organic particles in suspension 30 .However, being anionic polyelectrolytes, EPS have somewhat similar flocculation mechanism with synthetic anionic flocculants such as polyacrylamide.It has been reported to cause bioflocculation via the divalent cation bridging (DCB) mechanism, whereby divalent cations such as Ca 2+ and Mg 2+ form bridges between anionic groups of EPS and negatively charged particles 31 and reduce the electrostatic repulsion between the particles due to the compressed double layer.Similar mechanism of DCB has also been reported for anionic polyacrylamide flocculation of mineral (kaolinite) particles 32,33 .
In natural water environments, flocculation dynamics involve complicated mixtures of multiple types of cohesive particles 34 .Most clay minerals and EPS possess charges or functional groups that promotes floc formations 35 .It is well-established that floc formation is controlled by the intermolecular and surface forces between clay particles and EPS molecules, including van der Waals attractions 36 , Coulomb forces 37 , hydrogen bond 38 , and ion-dipole forces 39 , among others.These clay-EPS interactions are further complicated by water chemistry, clay surface's electrical double layers, and associated clay-clay interactions [40][41][42] .The EPSs act as polymeric bridges between particles to build large, settlable flocs 43 , which may otherwise be kept apart by the double layer repulsion 44,45 .Therefore, the geometrical conformation and length of EPS molecules also affect clay-EPS interactions.The multivalent cations can further enhance the formation of polymeric bridges by connecting between the functional sites of EPSs and the negatively charged sites of mineral particles 46 .The EPSs and binding cations mitigate the overall negative surface charge of particles, thereby increasing the flocculation potential of particles [47][48][49] .A group of such clay particles bridged by EPS molecules make up a loosely associated floc.As a result, the size of clay-EPS flocs depends on these interactions as well as the physical and chemical properties, mainly 'stickiness', of the two types of constituents, clay minerals, and EPSs.Clearly, EPSs play an important role in flocculation and are a key component in the heterogeneous composition of flocs.
In marine environments, EPS has been observed to form largesized flocs (>5 mm), or called "marine snows", on the sea up to several meters in size 50 , which aggregate with other particles in suspension such as minerals and pollutant-like spilt oil 51,52 .The physical interparticlle bonds provided by EPS are observed to increase the tensile strength of the mud fraction 53 and enhance mixed biophysical cohesion 54 .Therefore, quantification of the stickiness between specific types of cohesive particles becomes crucial for determining floc properties (size, density, and settling velocity) and flocculation dynamics 55,56 .Previous studies generally utilize an empirical cohesion coefficient to represent the stickiness value of particles 57,58 .However, multiple particles mixtures may behave very differently in aggregate characteristics during flocculation process.Most importantly, the main characteristic of EPS is to enhance aggregation of suspended cohesive particles dramatically 59 although the natural EPS may show much complexity in various fractions such as protein and polysaccharide due to microorganism species.Exsiting studies on the quantification of cohesion and the resulting floc properties due to the participation EPS is rare.The research gap regarding how the participation of EPS in the formation of flocs of cohesive sediment can modify the floc size, density, and the resuting settling velocity need to be further addressed.
The objective of this study is to quantify the effect of EPS on the variability of floc settling velocity.We provide quantitative evidence that bio-cohesion greatly enhances the stickiness during flocculation, which dominates over the London-van der Waals force and electrostatic bonding forces and hence the effect of clay type and salinity becomes unimportant.As a result, bio-cohesion drastically reduces the variability of floc settling velocity as a function of floc size and clay type.Our findings explain the field observed low variability of floc settling in fluvial and coastal environments due to the dominance of bio-cohesion.

Results
Quantifying stickiness of minerals and EPS flocculation.Eight cases of different collective mixture of minerals and EPS (C01 to C06 in saltwater with salinity 35 psu and C07 to C08 in freshwater condition, Table 1) show distinctly different flocculation rates during the first 3~5 minutes of floc generation.Here, the initial flocculation rate (IFR) is utilized to quantify the stickiness of each case, which is proportional to the magnitude of IFR.For the saltwater cases without EPS addition (C01 to C03), mineral particles themselves show a wide range of IFR or stickiness (Fig. 1a, b).The lowest stickiness is Kaolinite (C01) with IFR = Adding EPS to mineral flocs clearly increases the resulting floc stickiness in seawater (Fig. 1b).For instance, looking into the IRF of Kaolinite cases (C01 and C04), including EPS increases stickiness of Kaolinite floc by more than 70 % in seawater.For Bentonite floc (compare C02 and C05), the stickiness increases by only 26 %.As a result, adding EPS reduces the resulting the variability of particles stickiness due to mineral type.Considering the higher stickiness in EPS-Bentonite mixture (IFR = 0.44) and the lower stickiness in EPS-Kaolinite mixture (IFR = 0.36), a considerably lower variability of factor 0.44/0.36= 1.22 is obtained (compare to 1.67 for a much larger variability without EPS participation).Essentially, the EPS effect on increasing stickiness for Kaolinite particles is nearly three times greater than that for Bentonite.As Bentonite particles behave much stickier in seawater than Kaolinite, adding EPS only slightly increases its stickiness.On the contrary, for the less cohesive Kaolinite particles, EPS plays a dominating role in determining the overall stickiness.
In freshwater condition, the addition of EPS to Kaolinite and Bentonite show similar IFRs to those in seawater (Fig. 1c, d).For Kaolinite and EPS flocculation in freshwater (C07), the IFR reduces only slightly by around 10 % compared to saltwater, while for Bentonite and EPS (C08), the IFR reduction is only 5 %.The flocculation functions by EPS is clearly dominant in subaqueous environments.Ye et al. 60 reported that the physical properties of flocs can be quite different for specific mineral types when the cohesion of mineral particles controls floc aggregation and breakups.With the presence of EPS dominating the cohesion during flocculation, the corresponding floc characteristics may be importantly modified.
How dose EPS change floc structures?High-resolution microscopy images show unique structures of different mineral and EPS-mineral flocs.These distinct floc structures are resulted from each type of mineral particles' properties and bio-cohesion and they may be directly associated with stickiness.The pure Kaolinite particles having the lowest stickiness tend to form much smaller-sized flocs with a more compact structure (Fig. 2a) than those of Bentonite flocs (Fig. 2b).Examining a small number of larger Kaolinite floc, it is evident that they are of much lower porosity (Fig. 2a) than the Bentonite flocs where the higher transparency porous structure can be seen (Fig. 2b).The 1:1 mixed Kaolinite and Bentonite flocs appear to consist of both types of floc structures (Fig. 2c).
With the addition of equivalent amount of EPS, all three mineral cases show the formation of considerably larger and porous flocs (Fig. 2d-f).Although Kaolinite and Bentonite clay show evident differences in mineral particles' stickiness and thereby floc structures (Fig. 2a, b), the same amount of EPS addition enlarges floc size and porosity in both clay types (Fig. 2d, e).Particularly for Kaolinite floc, a large number of small flocs disappear after the addition of EPS and the resulting largesized floc are dominated by the higher porosity EPS-web structure (Fig. 2a, d).Meanwhile, the shape and structure of the EPS-Bentonite flocs appear to be qualitatively similar to those of pure Bentonite, except that the floc number (floc size) is dramatically reduced (increased) (Fig. 2b, e).For the 1:1 mixture of Kaolinite and Bentonite, adding EPS tends to bond together many smaller mineral flocs to form large porous floc bodies (Fig. 2c, f).These floc images reveal the role of sticky EPS in homogenize the aggregate structure of different clays, and this distinct effect is expected to modify the physical properties of floc to be quantified in the next section.
How does EPS change floc density, settling velocity, and fractal dimension?The results analyzed by the 2nd version of Laboratory Spectral Flocculation Characteristics instrument (LabS-FLOC-2 system, see the Methods section) for floc numbers (Fig. 3a, c), effective density (Fig. 3d, f), settling velocity (Fig. 3g-i) and fractal dimension (Fig. 3j-l) in 12 size bands (Fig. 3m) reveal the vital role of EPS in controlling physical properties of flocs.EPS addition clearly increases the floc numbers in large-size bands (SB) of Kaolinite (SB6-8) and Bentonite (SB8-12) (Fig. 3a, b).Since the total floc mass must conserve, increased floc number in larger SB causes a reduction of floc number in smaller SB.Specifically, adding EPS reduces the floc number in size bands smaller than 160 μm in Kaolinite (Fig. 3a) and 80 μm in Bentonite (Fig. 3b).This is consistent with the image shown in Fig. 2d, e that EPS produces large flocs by connecting smaller flocs via its mucus web structure.A similar but less pronounced trend is observed by adding EPS to the Kaolinite and Bentonite mixture (Fig. 3c).
Since EPS has a very lower effective density (~33~200 kg•m -3 ) 61 than the mineral effective density (~1650 kg•m -3 ), the presence of EPS can importantly reduce the effective density of large Kaolinite flocs (floc size >160 μm) (Fig. 3d), and their settling velocity is also reduced by a factor 2~3 (Fig. 3g).Specifically, for flocs larger than 160 μm, pure Kaolinite has a settling velocity ranging from 4~8 mm•s −1 , while the EPS and Kaolinite mixture shows a much narrower range of 3~4 mm•s −1 (Fig. 3g).Adding EPS also reduces the density of large Bentonite flocs (floc size >320 μm) while contrarily, slightly increases the density of smaller Bentonite flocs (floc size <320 μm) (Fig. 3e).This results in an even lower settling velocity variability as a function of floc size (Fig. 3h).For floc size greater than 120 μm, pure Bentonite settling velocity ranges from 1.5~6 mm•s −1 , but Bentonite and EPS mixture shows a much narrower range of 2.5~4 mm•s −1 (Fig. 3h).Adding EPS to Kaolinite and Bentonite mixture reduces floc density throughout the entire floc spectrum with a more important reduction for floc size larger than 320 μm in SB8-10 (Fig. 3f).This also narrows the variability of floc settling velocity to between 0.5~2 mm•s −1 (Fig. 3i) for floc size greater than 120 μm while the pure Kaolinite and Bentonite mixture shows a very wide range of settling velocity between 2~11 mm•s −1 .
Our finding that the addition of EPS importantly reduces the settling velocity variability may be a remarkable implication for natural flocs with mixed types of cohesive materials.The general recommendations that the floc settling velocity is around 1 mm•s −1 in estuaries 21,22,62 and is around 0.34 mm•s −1 in the fluvial environments 25 are very likely due to bio-cohesion.The settling process of cohesive particles in natural subaqueous systems may be much stable and predictable with the participation of pervasive biological sticky materials.
Fractal dimension is a useful parameter to quantify the porosity and shape of flocs 63 .A fractal dimension as low as 2 or smaller indicates a high floc porosity and typically a elongated shape 64 .Adding EPS to Kaolinite, the fractal dimension is reduced from 2.5 to about 2.2~2.4 (Fig. 3j).Interestingly, adding EPS to Bentonite slightly increases the fractal dimension of small-sized flocs (Fig. 3k).EPS addition results in the loose small Bentonite floc structure becoming more compact.However, for large-sized Bentonite flocs, adding EPS shows an expected reduction of fractal dimension from 2.4 to 2.2 (Fig. 3k).Introducing EPS to a Kaolinite-Bentonite mixture, the fractal dimension is importantly reduced from 2.5 to 2.0 (Fig. 3l).Again, the reduction of fractal dimensions is consistent with the EPS web and gel structures bonding with mineral flocs, which influences the porosity and shape of the flocs especially in large size bands that generally contain more EPS constituent.

Discussion and conclusions
In cohesive sediment studies, the flocs are often classified by microflocs and macroflocs with a demarcation floc size set to be 160 μm 65,66 .The mean values of the floc settling velocity for each case are summarized in Table 2. Results again reveal that the pure mineral flocs generally show dramatic differences in settling velocity between macroflocs and microflocs (a ratio of 2.7, 2.4, and 3.9 for Kaolinite, Bentonite, and Kaolinite-Bentonite mixture, respectively).When EPS participates in the flocculation process, the mucus structure provides unique capabilities with a much greater stickiness to connect mineral particles/flocs that dominates the mineral cohesion and reduces the difference of settling velocity between microflocs and macroflocs (a ratio of 2.1, 1.5, and 1.6 for Kaolinite, Bentonite, Kaolinite-Bentonite mixture, respectively).In natural subaqueous environment, flocculation process can be highly influenced by multiple environmental factors, such as salinity and bio-cohesion 67,68 .In freshwater, flocculation occurs primarily due to bio-cohesion 25 (Fig. 1c).Algae bloom has been considered as the main contribution to the formation of large-sized macroflocs 69 .After all, biological EPS fraction may vary in natural water, but with generally high EPS production in estuarine and coastal ecosystems, its role in the flocculation process can importantly affect natural cohesive flocs settling characteristics and their depositional prediction 66 .
Results presented here also provide an explanation of the recent work by Ye et al. 27 , who show the participation of EPS in oil-mineral aggregates (OMAs) 70,71 importantly reduces the variability of settling velocity as a function of floc size.Using IFR to quantify stickness in the pure mineral and EPS-mineral samples in saline water and freshwater, this work provides quantitative evidence on the role of EPS in homogenize the variability of floc settling velocity.In coastal subaqueous environment largely influenced by human activities, cohesive mineral particles, and biological fractions tend to aggregate with particulate pollutants, as well as aqueous contaminants such as droplets of spilt oil 72,73 .Due to a much larger cohesion of Bentonite with fastest aggregation at initial flocculation phase (see Fig. 1), Kaolinite and Bentonite particles respond to oil differently 60 .Oil and lower cohesion Kaolinite particles form droplet-OMAs with a reduced effective density because the oil droplets remain largely intact.On the contrary, oil and more cohesive Bentonite particles form flaky OMAs with a slightly increased density.Hence, the resulting settling velocities are highly dependent on floc size (microflocs or macroflocs) and mineral type.As shown in Table 2, the macrofloc and microfloc settling velocity of oil-Kaolinite, oil-Bentonite, oil-Kaolinite-Bentonite mixture show a factor 2, 3, and 4 difference in their settling velocities, respectively.With the addition of EPS in these three oil-mineral cases, the settling velocity between microfloc and macrofloc show much lower variability of a factor, 1.2, 1.36, and 2.8, respectively 27 .Therefore, adding EPS to OMAs also tends to erase the effect of mineral types on the variability of settling velocity.
In summary, the experimental study presented here examined the importance of combined physical and biological stickiness provided by mineral clays and extracellular polymeric substances (EPS).Measured data reveals the prevailing effect of biological stickiness on flocculation and floc settling velocity.EPS is by far the most effective in determining aggregate characteristics due to a much stronger stickiness quantified in this study by the IFR.Microscope images confirm that with the EPS participation, the aggregate structures formed by different mineral clays become very similar due to the homogenization by the web structure of the low-density mucus.
Moreover, the effect of EPS has been shown to reduce the variability of four key physical characteristics of flocs (floc size, effective density, settling velocity, and fractal dimension) importantly by up to several factors.The key finding that the EPS participation in the mineral flocculation importantly reducing the variability of settling velocity explains the general consensus that flocs settling velocity in estuaries is around 1 mm•s −1 even lower 22 .Some most recent studies also have shown that fine sediments in the fluvial environments settle as flocs with a surprisingly low variability of settling velocity (~0.34 mm•s −1 ) 25 and very low variability of OMA settling velocity with high organic content 27 .Changes induced by biological cohesion and its interaction with physical cohesnion render the existing flocculation and settling flux predictors for natural cohesive materials inadequate for many subaqueous environments.The present results provide a strong evidence on the effect of bio-cohesion on flocculation and settling velocity of cohesive sediments and warrent more extensive future research to improve its prediction.

Methods
Floc generation.A self-designed experimental jar-test set 60 and eight different cases are set up to generate flocs of different mineral and artificial EPS content for saline water (C01 to C06, see Table 1) of 35 PSU and freshwater (C07 to C08) at a constant turbulence levet in a 1000 ml jar.Two most common clay types with large difference in cohesion in saline water: white Kaolin clay (92.3 ± 2.5 % Kaolinite) and Wyoming sodium Bentonite clay (85.2 ± 2.3 % Montmorillonite) with initial particle concerntration of 500 mg•l −1 , respectively are used to generate flocs.
Initially, the corresponding mineral clay and/or Xanthan (in dry powder) are weighted according to the cases to be added to the specific jar.Xanthan gum has been successufully applied in cohesive sediment transport experiments in simulating biological sticky mucus physical function in many previous labortary studies 1,54 .Differently from the subaqueous bed substrates, for the fine suspended particles forming flocs, most components can be cohesive materials (>90 %) including mineral clays, organic matters, contaminants etc.This also explains why the floc effective density can vary in a wide range (200~1600 mg•m −3 ) and the more EPS contained in a floc, the lower floc density is.In natural environments, the EPS % with a suspended floc mostly vary from 5 % (almost pure mineral flocs) to 95 % (marine snow) 50 .In the experimental tests, we selected a median amount of EPS (50 %) for the input cohesive mixtures which can be representative for the mixture flocculation standard.The mixture in each sample is mechanically mixed with extremely strong stirring speed (~1000 rpm) for about 2 minutes to break any floc into minimum-sized primary particles.Subsequently, the stirring speed is reduced and maintained at 490 rpm for 2 hours to reach the steady/equilibrium state as demonstrated in Ye et al. 60 .The three-component flow velocity were measured by a Vectrino Profiler (Nortek), which was mounted on the shelf above the magnetic stirrer with the sensor probes located 5 cm below the water surface in the jar 60 .Flow velocity data was measured in advance without addition of minerals and EPS but in otherwise the same artificial seawater at same flow depth in the identical jar).The time series of turbulent velocity fluctuations are transformed into Fourier space to obtain turbulent kinetic energy spectrum.Turbulence dissipation rate is then estimated to be ε ≈ 0.02 m 2 •s −3 via matching the Kolmogorov spectrum with Taylor frozen turbulence approximation 74,75   microscopy analysis because of the quick flocculation occurrence at the beginning.By monitoring this temporal evolution of floc numbers, two phases could be detected clearly.The first one was the IFR, where the floc number decreased (decay) due to the quick aggregation dominant process at the beginning.The second phase was the equilibrium state, in which the floc number gradually remained constant reflecting stability between aggregation and breakage (see Fig. 1a).All the floc samples were directly transfered from the running experiment in real-time to the microscope using wide mouth (>5 mm) plastic pipettes to minimize floc disturbance.To prevent squeezing samples, coverslips on the microscope glass slides were avoid.Floc samples were observed with a 10 times zoom-in screen on a DELL laptop by the camera software provided by AmScope Inc.
Equilibrium floc size and settling velocity.To quantify the floc size and settling velocity statistics, a settling column experiment is carried out for each case after the flocs have reached the equilibrim state.The size and settling velocity of flocs after reaching the equilibrium state were observed using a low intrusive LabSFLOC-2 system (the 2nd version of Laboratory Spectral Flocculation Characteristics instrument) 65 of the entire floc population for each sample being assessed.A floc sample can be extracted from its original water environment and is immediately transferred to the column using a modified pipette with wide mouth as much as possible.The vedio camera, the center of which is positioned 0.075 m above the base of the column, views all particles in the center of the column as they settle from within a predeterminded sampling volume.All of the flocs viewed by the camera, for each sample.Are measured both for floc size and settling velocity.Clear, gray-scale, 2-Dimensional optical images of the individual flocs are recorded by the CCD camera suite.The LabsFLOC-2 system used here can measure floc sizes of 8 mm in diameter and settling velocities approaching 45 mm•s −1 , providing the flexibility to measure both pure mud and other cohesive mixture sediment floc dynamics 65 .By implementing a sequence of image-analysis algorithms, the fractal dimension and other properties of a floc population may be computed.The data obtained from this LabSFLOC-2 system is both qualitative and quantitative.
Floc images analysis.Temporal microscopy images (six images for each sample at a given time covering as many flocs as possible) have been collected during flocs generation in a magnetic stirrer jar from beginning (t = 0 min) to the end (t = 2 hrs) for each case shown in Table 1.The samplings intervals were set to be every 0.5 min for the initial 10 mins, followed by every 1 min between t = 10 and 20 mins, every 2 mins between t = 20~40 mins, every 5 mins between t = 40~60 mins and every 10 mins between t = 60~120 mins.Floc numbers are counted semimanually with the aid of ImageJ software and Matlab tool at different instants.By normalizing the floc numbers counted at different instants by the initial floc number (collected at 0 min) of each sample, flocculation evolution time series were obtained for each cases (Fig. 1a, c).IFR is then calculated by estimating the slope of the tendency line of the first 3 min of each time series.The detected and counted floc numbers amount to hundreds to thousands individual flocs in the six microscopy images taken at every instant of each case.For the validity and reliability of the floc number data, multiple analysis has been conducted by two different workers.The data points are generally similar with <10 % in standard deviation for all samples.The results shown in Fig. 1 have been averaged by all the valid parallel data.
Equilibrium floc properties calculation.The equilibrium floc properties including, floc numbers, size, shape, and settling velocity were measured and analyzed from a series of floc images captured by the LabSFLOC-2 system 65 .The recorded high-speed videos of floc settling in a column were analyzed with MATLAB software routines based on the HR Wallingford Ltd DigiFloc software 76 and Java Script to semi-automatically process the digital recording images track to obtain floc size and settling velocity spectra 68,77 .Using the measured floc diameter D, settling velocity W s , and floc shape, the modified Stoke's Law 78 was applied to estimate individual floc effective density ρ e as 79 where the ρ w is the saltwater density, ν is the kinematic viscosity, and g is gravitational acceleration.The sphere-equivalent floc diameter D is calculated by where D major and D minor are associated with the measured major and minor axes correspondingly.The Oseen 80 correction factor f is written as: which accounts for higher particle Reynolds number effect and the particle Reynolds number is defined here as: When Re is much smaller than unity, the modified Stokes' law reduces to the commonly used Stokes' law 81,82 .By assuming floc has a fractal structure, the fractal dimension of floc n f can be calculated via the following relationship: 83

D d n f À3
¼ ρ e ρ s À ρ w ð5Þ in which the primary particle diameter d is specified to be 4 μm.
All the analyzed individual flocs in a given case were classified in 12 floc size bands.The physical properties shown in Fig. 3 are the counted floc numbers of each size band, the averaged settling velocity, effective density, and fractal dimension for each floc size band.

Fig. 1
Fig. 1 Temporal evolutions of normalized floc numbers in each studies case.a, b are temporal evolutions of normalized floc numbers for six saltwater cases: Kaolinite (K, blank circles, C-01), Bentonite (B, solid circles, C-02), 1:1 mixed Kaolinite and Bentonite (K + B, gray circles, C-03), EPS-Kaolinite (EPS + K, blank squares, C-04), EPS-Bentonite (EPS + B, solid squares, C-05), EPS-Kaolinite-Bentonite (EPS + K + B, gray squares, C-06); c, d show that the temporal evolutions of two freshwater samples for EPS-Kaolinite (C-07) and EPS-Bentonite (C-08) are similar to their saltwater counterparts.The initial particle number of each case measured from high-resolution image was used for number normalization.The shadowed area b and d represents the zoom-in of the initial 3 minutes emphasizes the initial floc numbers changes, and the slopes quantify the initial flocculation rates.

Fig. 3
Fig.3Floc properties obtained from LabSFLOC-2.0 analysis of saltwater cases.a-l Show the size spectra, expressed in 12 size bands (see m), of floc numbers (a-c), effective densities of flocs (d-f), settling velocities of flocs (g-i), and fractal dimension (j-l) in Kaolinite-related cases (a, d, g, j), Bentoniterelated cases (b, e, h, k), and mixed kaolinite and bentonite cases (c, f, i, l), respectively.
. The resulting turbulent shear rate is G = ffiffiffiffiffiffiffi ε=ν p = 140 s −1 with the fluid viscosity estimated to be ν = 10 −6 m 2 •s −1 .Initial flocculation rate.To quantify the stickiness of each floc sample, the IFR has been estimated.A high-resolution digital microscopy system was used to observe detailed floc structures and to carry out statistical analysis on the floc numbers at different time during the floc generation for 120 min.Particularly in the initial 10 mins, floc samplings were conducted every 0.5 min from the stirring jar to the

Table 1 A
summary of samples used in each case of the jar experiment.

Table 2
Summary of the mean settling velocity of microflocs (<160 μm) and macrofloc (>160 μm) fraction of each saltwater samples (C-01 to C-06) and comparable data from oil participated mineral and EPS floc samples reported byYe et al. (2021).